along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
-<refentry id="systemd-install">
+<refentry id="systemctl">
<refentryinfo>
<title>systemctl</title>
<refnamediv>
<refname>systemctl</refname>
- <refpurpose>Control the systemd system and session manager</refpurpose>
+ <refpurpose>Control the systemd system and service manager</refpurpose>
</refnamediv>
<refsynopsisdiv>
<para><command>systemctl</command> may be used to
introspect and control the state of the
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- system and session manager.</para>
+ system and service manager.</para>
</refsect1>
<refsect1>
text and exits.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>--version</option></term>
+
+ <listitem><para>Prints a short version
+ string and exits.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><option>--type=</option></term>
<term><option>-t</option></term>
<term><option>-p</option></term>
<listitem><para>When showing
- unit/job/manager information, limit
- display to certain property names. If
- not specified all set properties are
+ unit/job/manager properties, limit
+ display to certain properties as
+ specified as argument. If not
+ specified all set properties are
shown. The argument should be a
property name, such as
- <literal>MainPID</literal>.</para></listitem>
+ <literal>MainPID</literal>. If
+ specified more than once all
+ properties with the specified names
+ are shown.</para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>When listing units,
show all units, regardless of their
state, including inactive units. When
- showing unit/job/manager information,
+ showing unit/job/manager properties,
show all properties regardless whether
they are set or not.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--replace</option></term>
+ <term><option>--failed</option></term>
- <listitem><para>If the requested
- operation conflicts with an existing
- unfinished operation, replace the
- existing operation by the requested
- operation. If this is not specified
- the requested operation will
- fail.</para></listitem>
+ <listitem><para>When listing units,
+ show only failed units. Do not confuse
+ with
+ <option>--fail</option>.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--system</option></term>
+ <term><option>--full</option></term>
- <listitem><para>Talk to the systemd
- system manager. (Default)</para></listitem>
+ <listitem><para>Do not ellipsize unit
+ names and truncate unit descriptions
+ in the output of
+ <command>list-units</command> and
+ <command>list-jobs</command>.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--session</option></term>
+ <term><option>--fail</option></term>
- <listitem><para>Talk to the systemd
- session manager of the calling user.</para></listitem>
+ <listitem><para>If the requested
+ operation conflicts with a pending
+ unfinished job, fail the command. If
+ this is not specified the requested
+ operation will replace the pending job,
+ if necessary. Do not confuse
+ with
+ <option>--failed</option>.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--no-block</option></term>
-
- <listitem><para>Do not synchronously wait for
- the requested operation to finish. If this is
- not specified the job will be verified,
- enqueued and <command>systemctl</command> will
- wait until it is completed. By passing this
- argument it is only verified and
- enqueued.</para></listitem> </varlistentry>
+ <term><option>--ignore-dependencies</option></term>
+
+ <listitem><para>When enqueuing a new
+ job ignore all its dependencies and
+ execute it immediately. If passed no
+ required units of the unit passed will
+ be pulled in, and no ordering
+ dependencies will be honoured. This is
+ mostly a debugging and rescue tool for
+ the administrator and should not be
+ used by
+ applications.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><option>--quiet</option></term>
<term><option>-q</option></term>
<listitem><para>Suppress output to
- STDOUT for <command>snapshot</command>
- and
- <command>check</command>.</para></listitem>
+ STDOUT in
+ <command>snapshot</command>,
+ <command>is-active</command>,
+ <command>enable</command> and
+ <command>disable</command>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-block</option></term>
+
+ <listitem><para>Do not synchronously wait for
+ the requested operation to finish. If this is
+ not specified the job will be verified,
+ enqueued and <command>systemctl</command> will
+ wait until it is completed. By passing this
+ argument it is only verified and
+ enqueued.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-legend</option></term>
+
+ <listitem><para>Do not print a legend, i.e.
+ the column headers and the footer with hints.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-pager</option></term>
+
+ <listitem><para>Do not pipe output into a
+ pager.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--system</option></term>
+
+ <listitem><para>Talk to the systemd
+ system manager. (Default)</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--user</option></term>
+
+ <listitem><para>Talk to the systemd
+ manager of the calling user.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--order</option></term>
+ <term><option>--require</option></term>
+
+ <listitem><para>When used in
+ conjunction with the
+ <command>dot</command> command (see
+ below), selects which dependencies are
+ shown in the dependency graph. If
+ <option>--order</option> is passed
+ only dependencies of type
+ <varname>After=</varname> or
+ <varname>Before=</varname> are
+ shown. If <option>--require</option>
+ is passed only dependencies of type
+ <varname>Requires=</varname>,
+ <varname>RequiresOverridable=</varname>,
+ <varname>Requisite=</varname>,
+ <varname>RequisiteOverridable=</varname>,
+ <varname>Wants=</varname> and
+ <varname>Conflicts=</varname> are
+ shown. If neither is passed, shows
+ dependencies of all these
+ types.</para></listitem>
</varlistentry>
<varlistentry>
message before
halt, power-off, reboot.</para></listitem>
</varlistentry>
+
+ <varlistentry>
+ <term><option>--global</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command> and
+ <command>disable</command>, operate on the
+ global user configuration
+ directory, thus enabling or disabling
+ a unit file globally for all future
+ logins of all users.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-reload</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command> and
+ <command>disable</command>, do not
+ implicitly reload daemon configuration
+ after executing the
+ changes.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-ask-password</option></term>
+
+ <listitem><para>When used with
+ <command>start</command> and related
+ commands, disables asking for
+ passwords. Background services may
+ require input of a password or
+ passphrase string, for example to
+ unlock system hard disks or
+ cryptographic certificates. Unless
+ this option is specified and the
+ command is invoked from a terminal
+ <command>systemctl</command> will
+ query the user on the terminal for the
+ necessary secrets. Use this option to
+ switch this behavior off. In this
+ case the password must be supplied by
+ some other means (for example
+ graphical password agents) or the
+ service might fail.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--kill-who=</option></term>
+
+ <listitem><para>When used with
+ <command>kill</command>, choose which
+ processes to kill. Must be one of
+ <option>main</option>,
+ <option>control</option> or
+ <option>all</option> to select whether
+ to kill only the main process of the
+ unit, the control process or all
+ processes of the unit. If omitted
+ defaults to
+ <option>all</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--signal=</option></term>
+ <term><option>-s</option></term>
+
+ <listitem><para>When used with
+ <command>kill</command>, choose which
+ signal to send to selected
+ processes. Must be one of the well
+ known signal specifiers such as
+ SIGTERM, SIGINT or SIGSTOP. If
+ omitted defaults to
+ <option>SIGTERM</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--force</option></term>
+ <term><option>-f</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command>, override any
+ existing conflicting
+ symlinks.</para></listitem>
+
+ <listitem><para>When used with
+ <command>halt</command>,
+ <command>poweroff</command>,
+ <command>reboot</command> or
+ <command>kexec</command> execute
+ selected operation without shutting
+ down all units. However, all processes
+ will be killed forcibly and all file
+ systems are unmounted or remounted
+ read-only. This is hence a drastic but
+ relatively safe option to request an
+ immediate reboot.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--root=</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command>/<command>disable</command>/<command>is-enabled</command> (and
+ related commands), use alternative
+ root path when looking for unit
+ files.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--runtime</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command>/<command>disable</command>/<command>is-enabled</command> (and related commands), make
+ changes only temporarily, so that they
+ are dropped on the next reboot. This
+ will have the effect that changes are
+ not made in subdirectories of
+ <filename>/etc</filename> but in
+ <filename>/run</filename>, with
+ identical immediate effects, however,
+ since the latter is lost on reboot,
+ the changes are lost
+ too.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-H</option></term>
+ <term><option>--host</option></term>
+
+ <listitem><para>Execute operation
+ remotely. Specify a hostname, or
+ username and hostname separated by @,
+ to connect to. This will use SSH to
+ talk to the remote systemd
+ instance.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-P</option></term>
+ <term><option>--privileged</option></term>
+
+ <listitem><para>Acquire privileges via
+ PolicyKit before executing the
+ operation.</para></listitem>
+ </varlistentry>
</variablelist>
<para>The following commands are understood:</para>
<varlistentry>
<term><command>start [NAME...]</command></term>
- <listitem><para>Start one or more
- units specified on the command
+ <listitem><para>Start (activate) one
+ or more units specified on the command
line.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>stop [NAME...]</command></term>
- <listitem><para>Stop one or more units
- specified on the command
- line.</para></listitem>
- </varlistentry>
- <varlistentry>
- <term><command>restart [NAME...]</command></term>
-
- <listitem><para>Restart one or more
- units specified on the command
+ <listitem><para>Stop (deactivate) one
+ or more units specified on the command
line.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>reload [NAME...]</command></term>
- <listitem><para>Asks all services
- whose units are listed on the command
- line to reload their
+ <listitem><para>Asks all units listed
+ on the command line to reload their
configuration. Note that this will
- reload the daemon configuration
- itself, not the unit configuration
- file of systemd. If you want systemd
- to reload the configuration file of a
- unit use the
+ reload the service-specific
+ configuration, not the unit
+ configuration file of systemd. If you
+ want systemd to reload the
+ configuration file of a unit use the
<command>daemon-reload</command>
command. In other words: for the
example case of Apache, this will
<filename>httpd.conf</filename> in the
web server, not the
<filename>apache.service</filename>
- systemd unit file. </para> <para>This
- command should not be confused with
- the <command>daemon-reload</command>
- or <command>load</command>
+ systemd unit file. </para>
+
+ <para>This command should not be
+ confused with the
+ <command>daemon-reload</command> or
+ <command>load</command>
commands.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>restart [NAME...]</command></term>
+
+ <listitem><para>Restart one or more
+ units specified on the command
+ line. If the units are not running yet
+ they will be
+ started.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>try-restart [NAME...]</command></term>
+
+ <listitem><para>Restart one or more
+ units specified on the command
+ line if the units are running. Do
+ nothing if units are not running.
+ Note that for compatibility
+ with Red Hat init scripts
+ <command>condrestart</command> is
+ equivalent to this command.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>reload-or-restart [NAME...]</command></term>
+
+ <listitem><para>Reload one or more
+ units if they support it. If not,
+ restart them instead. If the units
+ are not running yet they will be
+ started.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>reload-or-try-restart [NAME...]</command></term>
+
+ <listitem><para>Reload one or more
+ units if they support it. If not,
+ restart them instead. Do nothing if
+ the units are not running. Note that
+ for compatibility with SysV init
+ scripts
+ <command>force-reload</command> is
+ equivalent to this
+ command.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><command>isolate [NAME]</command></term>
<listitem><para>Start the unit
specified on the command line and its
- dependencies and stop all
- others.</para></listitem>
+ dependencies and stop all others.</para>
+
+ <para>This is similar to changing the
+ runlevel in a traditional init system. The
+ <command>isolate</command> command will
+ immediately stop processes that are not
+ enabled in the new unit, possibly including
+ the graphical environment or terminal you
+ are currently using.</para>
+
+ <para>Note that this works only on units
+ where <option>AllowIsolate=</option> is
+ enabled. See
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ for details.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>check [NAME...]</command></term>
+ <term><command>kill [NAME...]</command></term>
+
+ <listitem><para>Send a signal to one
+ or more processes of the unit. Use
+ <option>--kill-who=</option> to select
+ which process to kill. Use
+ <option>--kill-mode=</option> to
+ select the kill mode and
+ <option>--signal=</option> to select
+ the signal to send.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>is-active [NAME...]</command></term>
<listitem><para>Check whether any of
- the specified units is active
- (i.e. running). Returns 0 if at least
- one is active, non-zero
+ the specified units are active
+ (i.e. running). Returns an exit code
+ 0 if at least one is active, non-zero
otherwise. Unless
<option>--quiet</option> is specified
this will also print the current unit
state to STDOUT.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>status [NAME...]</command></term>
-
- <listitem><para>Show short status
- information about one or more
- units. This shows terse runtime
- information about
- units.</para></listitem>
+ <term><command>status [NAME...|PID...]</command></term>
+
+ <listitem><para>Show terse runtime
+ status information about one or more
+ units. This function is intended to
+ generate human-readable output. If you
+ are looking for computer-parsable
+ output, use <command>show</command>
+ instead. If a PID is passed
+ information about the unit the process
+ of the PID belongs to is
+ shown.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>show [NAME...|JOB...]</command></term>
- <listitem><para>Show properties of
- one or more units, jobs or the manager
+ <listitem><para>Show properties of one
+ or more units, jobs or the manager
itself. If no argument is specified
properties of the manager will be
shown. If a unit name is specified
- properties of the unit is shown,
- and if a job id is specified
- properties of the job is
- shown.</para></listitem>
+ properties of the unit is shown, and
+ if a job id is specified properties of
+ the job is shown. By default, empty
+ properties are suppressed. Use
+ <option>--all</option> to show those
+ too. To select specific properties to
+ show use
+ <option>--property=</option>. This
+ command is intended to be used
+ whenever computer-parsable output is
+ required. Use
+ <command>status</command> if you are
+ looking for formatted human-readable
+ output.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>reset-failed [NAME...]</command></term>
+
+ <listitem><para>Reset the
+ '<literal>failed</literal>' state of the
+ specified units, or if no unit name is
+ passed of all units. When a unit fails
+ in some way (i.e. process exiting with
+ non-zero error code, terminating
+ abnormally or timing out) it will
+ automatically enter the
+ '<literal>failed</literal>' state and
+ its exit code and status is recorded
+ for introspection by the administrator
+ until the service is restarted or
+ reset with this
+ command.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>list-unit-files</command></term>
+
+ <listitem><para>List installed unit files.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>enable [NAME...]</command></term>
+
+ <listitem><para>Enable one or more
+ unit files, as specified on the
+ command line. This will create a
+ number of symlinks as encoded in the
+ <literal>[Install]</literal> sections
+ of the unit files. After the symlinks
+ have been created the systemd
+ configuration is reloaded (in a way
+ that is equivalent to
+ <command>daemon-reload</command>) to
+ ensure the changes are taken into
+ account immediately. Note that this
+ does not have the effect that any of
+ the units enabled are also started at
+ the same time. If this is desired a
+ separate <command>start</command>
+ command must be invoked for the
+ unit.</para>
+
+ <para>This command will
+ print the actions executed. This
+ output may be suppressed by passing
+ <option>--quiet</option>.</para>
+
+ <para>Note that this operation creates
+ only the suggested symlinks for the
+ units. While this command is the
+ recommended way to manipulate the unit
+ configuration directory, the
+ administrator is free to make
+ additional changes manually, by
+ placing or removing symlinks in the
+ directory. This is particularly useful
+ to create configurations that deviate
+ from the suggested default
+ installation. In this case the
+ administrator must make sure to invoke
+ <command>daemon-reload</command>
+ manually as necessary, to ensure his
+ changes are taken into account.</para>
+
+ <para>Enabling units should not be
+ confused with starting (activating)
+ units, as done by the
+ <command>start</command>
+ command. Enabling and starting units
+ is orthogonal: units may be enabled
+ without being started and started
+ without being enabled. Enabling simply
+ hooks the unit into various suggested
+ places (for example, so that the unit
+ is automatically started on boot or
+ when a particular kind of hardware is
+ plugged in). Starting actually spawns
+ the daemon process (in case of service
+ units), or binds the socket (in case
+ of socket units), and so
+ on.</para>
+
+ <para>Depending on whether
+ <option>--system</option>,
+ <option>--user</option> or
+ <option>--global</option> is specified
+ this enables the unit for the system,
+ for the calling user only
+ or for all future logins of all
+ users. Note that in the latter case no
+ systemd daemon configuration is
+ reloaded.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>disable [NAME...]</command></term>
+
+ <listitem><para>Disables one or more
+ units. This removes all symlinks to
+ the specified unit files from the unit
+ configuration directory, and hence
+ undoes the changes made by
+ <command>enable</command>. Note
+ however that this removes
+ all symlinks to the unit files
+ (i.e. including manual additions), not
+ just those actually created by
+ <command>enable</command>. This call
+ implicitly reloads the systemd daemon
+ configuration after completing the
+ disabling of the units. Note that this
+ command does not implicitly stop the
+ units that is being disabled. If this
+ is desired an additional
+ <command>stop</command>command should
+ be executed afterwards.</para>
+
+ <para>This command will print the
+ actions executed. This output may be
+ suppressed by passing
+ <option>--quiet</option>.</para>
+ </listitem>
+
+ <para>This command honors
+ <option>--system</option>,
+ <option>--user</option>,
+ <option>--global</option> in a similar
+ way as
+ <command>enable</command>.</para>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>is-enabled [NAME...]</command></term>
+
+ <listitem><para>Checks whether any of
+ the specified unit files is enabled
+ (as with
+ <command>enable</command>). Returns an
+ exit code of 0 if at least one is
+ enabled, non-zero otherwise. Prints
+ the current enable status. To suppress
+ this output use
+ <option>--quiet</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>reenable [NAME...]</command></term>
+
+ <listitem><para>Reenable one or more
+ unit files, as specified on the
+ command line. This is a combination of
+ <command>disable</command> and
+ <command>enable</command> and is
+ useful to reset the symlinks a unit is
+ enabled with to the defaults
+ configured in the
+ <literal>[Install]</literal> section
+ of the unit file.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>preset [NAME...]</command></term>
+
+ <listitem><para>Reset one or more unit
+ files, as specified on the command
+ line, to the defaults configured in a
+ preset file. This has the same effect
+ as <command>disable</command> or
+ <command>enable</command>, depending
+ how the unit is listed in the preset
+ files.</para>
+ </listitem>
</varlistentry>
+
+ <varlistentry>
+ <term><command>mask [NAME...]</command></term>
+
+ <listitem><para>Mask one or more unit
+ files, as specified on the command
+ line. This will link these units to
+ <filename>/dev/null</filename>, making
+ it impossible to start them. This is a stronger version
+ of <command>disable</command>, since
+ it prohibits all kinds of activation
+ of the unit, including manual
+ activation. Use this option with
+ care.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>unmask [NAME...]</command></term>
+
+ <listitem><para>Unmask one or more
+ unit files, as specified on the
+ command line. This will undo the
+ effect of
+ <command>mask</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>link [NAME...]</command></term>
+
+ <listitem><para>Link a unit file that
+ is not in the unit file search paths
+ into the unit file search path. This
+ requires an absolute path to a unit
+ file. The effect of this can be undone
+ with <command>disable</command>. The
+ effect of this command is that a unit
+ file is available for
+ <command>start</command> and other
+ commands although it isn't installed
+ directly in the unit search
+ path.</para>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>load [NAME...]</command></term>
<listitem><para>Cancel one or more
jobs specified on the command line by
their numeric job
- IDs.</para></listitem>
- </varlistentry>
- <varlistentry>
- <term><command>clear-jobs</command></term>
-
- <listitem><para>Cancel all jobs that are in progress.</para></listitem>
- </varlistentry>
- <varlistentry>
- <term><command>monitor</command></term>
-
- <listitem><para>Monitor unit/job
- changes. This is mostly useful for
- debugging purposes and prints a line
- each time systemd loads or unloads a
- unit configuration file, or a unit
- property changes.</para></listitem>
+ IDs. If no job id is specified, cancel all pending jobs.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>dump</command></term>
be parsed by
applications.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>dot</command></term>
+
+ <listitem><para>Generate textual
+ dependency graph description in dot
+ format for further processing with the
+ GraphViz
+ <citerefentry><refentrytitle>dot</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ tool. Use a command line like
+ <command>systemctl dot | dot -Tsvg >
+ systemd.svg</command> to generate a
+ graphical dependency tree. Unless
+ <option>--order</option> or
+ <option>--require</option> is passed
+ the generated graph will show both
+ ordering and requirement
+ dependencies.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><command>snapshot [NAME]</command></term>
<para>A snapshot refers to a saved
state of the systemd manager. It is
- implemented itself as unit that is
+ implemented itself as a unit that is
generated dynamically with this
command and has dependencies on all
units active at the time. At a later
unit files and recreate the entire
dependency tree. While the daemon is
reloaded, all sockets systemd listens
- on on behalf of user configuration, will
+ on on behalf of user configuration will
stay accessible.</para> <para>This
command should not be confused with
the <command>load</command> or
configuration will stay
accessible.</para></listitem>
</varlistentry>
- <varlistentry>
- <term><command>daemon-exit</command></term>
-
- <listitem><para>Ask the systemd
- manager to quit. This is only
- supported for session managers
- (i.e. in conjunction with the
- <option>--session</option> option) and
- will fail otherwise.</para></listitem>
- </varlistentry>
<varlistentry>
<term><command>show-environment</command></term>
is only removed if it has the
specified value.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>default</command></term>
+ <listitem><para>Enter default
+ mode. This is mostly equivalent to
+ <command>start
+ default.target</command>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>rescue</command></term>
+
+ <listitem><para>Enter rescue
+ mode. This is mostly equivalent to
+ <command>isolate
+ rescue.target</command> but also
+ prints a wall message to all
+ users.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>emergency</command></term>
+
+ <listitem><para>Enter emergency
+ mode. This is mostly equivalent to
+ <command>isolate
+ emergency.target</command> but also
+ prints a wall message to all
+ users.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><command>halt</command></term>
system. This is mostly equivalent to
<command>start halt.target</command>
but also prints a wall message to all
- users.</para></listitem>
+ users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are killed
+ and all file systems are unmounted or
+ mounted read-only, immediately
+ followed by the
+ system halt.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>poweroff</command></term>
equivalent to <command>start
poweroff.target</command> but also
prints a wall message to all
- users.</para></listitem>
+ users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are killed
+ and all file systems are unmounted or
+ mounted read-only, immediately
+ followed by the
+ powering off.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>reboot</command></term>
equivalent to <command>start
reboot.target</command> but also
prints a wall message to all
- users.</para></listitem>
- </varlistentry>
- <varlistentry>
- <term><command>default</command></term>
-
- <listitem><para>Enter default
- mode. This is mostly equivalent to
- <command>start
- default.target</command>.</para></listitem>
+ users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are killed
+ and all file systems are unmounted or
+ mounted read-only, immediately
+ followed by the
+ reboot.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>rescue</command></term>
+ <term><command>kexec</command></term>
- <listitem><para>Enter rescue
- mode. This is mostly equivalent to
- <command>isolate
- rescue.target</command> but also
- prints a wall message to all
- users.</para></listitem>
+ <listitem><para>Shut down and reboot
+ the system via kexec. This is mostly
+ equivalent to <command>start
+ kexec.target</command> but also prints
+ a wall message to all users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are killed
+ and all file systems are unmounted or
+ mounted read-only, immediately
+ followed by the
+ reboot.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>emergency</command></term>
+ <term><command>exit</command></term>
- <listitem><para>Enter emergency
- mode. This is mostly equivalent to
- <command>isolate
- emergency.service</command> but also
- prints a wall message to all
- users.</para></listitem>
+ <listitem><para>Ask the systemd
+ manager to quit. This is only
+ supported for user service managers
+ (i.e. in conjunction with the
+ <option>--user</option> option) and
+ will fail otherwise.</para></listitem>
</varlistentry>
</variablelist>
code otherwise.</para>
</refsect1>
+ <refsect1>
+ <title>Environment</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><varname>$SYSTEMD_PAGER</varname></term>
+ <listitem><para>Pager to use when
+ <option>--no-pager</option> is not given;
+ overrides <varname>$PAGER</varname>. Setting
+ this to an empty string or the value
+ <literal>cat</literal> is equivalent to passing
+ <option>--no-pager</option>.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemadm</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>