hole_dia = 4 + 0.5;
hole_slot = 5;
-slop = 2; // total, not each side
+movement_extra_angle = 5;
+
+slop = 4; // total, not each side
torch_min_xcoord_fig_cm = -2.7; // coordinates of bottom left of curve
torch_min_ycoord_fig_cm = -5.9; // & big part in fig file. mid top is origin
torch_smm_xcoord_fig_cm = -1.9; // x coord of lhs of narrow part
-//$fa=5;
+miniature = 1; // can adjust this to get commitid size right and rescale *Print
+
+$fa=5;
// calculated
+include <commitid.scad>
+
torch_dxf_scale =
[ (torch_big_dia - torch_lit_dia) /
(-(torch_min_xcoord_fig_cm - torch_smm_xcoord_fig_cm) * 10 * 2),
translate([0, -torch_out, 0]) {
translate([0, 0, -torch_recess])
Torch();
- rotate([90,0,0])
- linear_extrude(height= block_out)
- projection() rotate([-90,0,0]) Torch();
+ for (as=[-1,+1]) {
+ rotate([0,0, as*movement_extra_angle])
+ rotate([90,0,0])
+ linear_extrude(height= block_out)
+ projection() rotate([-90,0,0]) Torch();
+ }
}
}
-module Bracket(){
+module Bracket(){ ////toplevel
+ cid_w = stem_width * .75;
+ hole_near = hole_slot + hole_dia;
+
difference(){
mirror([0,1,0]) {
translate([-stem_width/2, 0, -stem_len])
}
ScrewHole(holes[0], 90);
ScrewHole(holes[1], 0);
+ translate([-cid_w/2, 0, above - holes[0] - hole_near])
+ rotate([-90,0,0])
+ scale([miniature, miniature, 1])
+ Commitid_BestCount([cid_w, holes[1]-holes[0] - hole_near*2]
+ / miniature);
}
difference(){
mirror([0,1,0])
}
}
-module Demo(){
+module BracketPrint(){ ////toplevel
+ scale(1/miniature)
+ rotate([-90,0,0])
+ Bracket();
+}
+
+module TestTorchPrint(){ ////toplevel
+ scale(1/miniature)
+ intersection(){
+ translate([0,0, torch_lit_dia / 2 / sqrt(2)])
+ rotate([-90,0,0])
+ Torch();
+ translate([-100, -torch_tot_len*2, 0])
+ cube([200, torch_tot_len*4, 200]);
+ }
+}
+
+module Demo(){ ////toplevel
color("red")
translate([0, -torch_out, 0])
TorchOrig();
Bracket();
}
-Demo();
-
+//Demo();
+//BracketPrint();
+//TestTorchPrint();