filamenttrestle extend pin

[reprap-play.git] / filamenttrestle.scad

diff --git a/filamenttrestle.scad b/filamenttrestle.scad
index df3b53a11381668598832e0774d50c962a7a8cfa..224f0edb21adaddfded425689c2f24e7a75c90c2 100644 (file)
--- a/filamenttrestle.scad
+++ b/filamenttrestle.scad
@@ -8,13 +8,22 @@ include <doveclip.scad>
 include <axlepin.scad>
 
 spoolradclear = 10;
+spoolradslop = 2;
 
-spoolinnerslop = 2;
+spoolinnerslop = 4.5;
+axleslop = 0.5;
 
-barrad = 7;
+axlerad = 7;
 barwasherrad = 17;
 
-hubbasethick = 4;
+hubbasethick = 6;
+hubmainthick = 20;
+hubbaseweb = 2;
+hubbasestalkwidth = 6;
+hubwalls = 2.5;
+hubpillarw = 4;
+hubbaserad = spoolinnerrad + 15;
+hubmainrad = spoolinnerrad - spoolradslop;
 
 legw = 12;
 plugl = 20;
@@ -37,13 +46,13 @@ pindh = 0.50;
 pindwidth = 0.75;
 
 pintaperlen = plugwmax * 0.85;
-pinstraightlen = 10;
+pinstraightlen = 17.5;
 
 spoolouterpad = AxlePin_holerad()*2 * 1.5;
 spoolbarlen = spoolwidth +
   2*(Washer_thick() + hubbasethick + AxlePin_holerad()
      + spoolinnerslop + spoolouterpad);
-  barz = barrad * 0.5;
+  barz = axlerad * 0.5;
 axlepin_x = spoolwidth/2 + hubbasethick +
   Washer_thick() + spoolinnerslop + AxlePin_holerad()*0.5;
 
@@ -91,17 +100,17 @@ module Bar(){ ////toplevel
     }
     translate([0,0,barz]) {
       translate([-100,0,0])
-       rotate([0,90,0]) cylinder(r=barrad, h=200, $fn=30);
+       rotate([0,90,0]) cylinder(r=axlerad, h=200, $fn=30);
     }
   }
 }
 
 module FtAxlePin(){ ////toplevel
-  AxlePin(barrad, (barrad + barwasherrad*2)/3 * 2);
+  AxlePin(axlerad, (axlerad + barwasherrad*2)/3 * 2);
 }
 
 module AxleWasher(){ ////toplevel
-  Washer(barrad, barwasherrad);
+  Washer(axlerad, barwasherrad);
 }
 
 module Trestle(){ ////toplevel
@@ -185,6 +194,39 @@ module Pin(){ ////toplevel
   }
 }
 
+module HubEnd(){ ////toplevel
+  thick = hubmainthick+hubbasethick;
+  difference(){
+    union(){
+      for (ang=[0 : 60 : 359]) {
+       rotate([0,0,ang]) {
+         translate([hubmainrad - hubwalls/2, -hubbasestalkwidth/2, 0])
+           cube([hubbaserad - (hubmainrad - hubwalls/2),
+                 hubbasestalkwidth, hubbasethick]);
+         ExtenderPillar(length = hubmainrad-hubwalls/2,
+                        height = hubbasethick + hubmainthick,
+                        pillarw = hubpillarw);
+       }
+      }
+      cylinder(r=axlerad+hubwalls, h=thick);
+      cylinder(r=hubmainrad-0.1, h=hubbaseweb);
+      difference(){
+       cylinder(r=hubmainrad, h=thick, $fn=100);
+       translate([0,0,-1])
+         cylinder(r=hubmainrad-hubwalls, h=thick+2);
+      }
+      difference(){
+       cylinder(r=hubbaserad, h=hubbasethick, $fn=50);
+       translate([0,0,-1])
+         cylinder(r=hubbaserad-hubwalls, h=hubbasethick+2);
+      }
+    }
+    translate([0,0,-1])
+      cylinder(r=axlerad+axleslop, h=thick+2, $fn=50);
+  }
+}
+
+
 module TestKit(){ ////toplevel
   translate([30,0,0]) Pin();
   translate([30,30,0]) Pin();
@@ -207,13 +249,19 @@ module DemoSpool(){
 }
 
 module Demo(){
-  Bar();
+  color("blue") Bar();
   for (mir=[0,1]) {
     mirror([mir,0,0]) {
-      translate([spoolbarlen/2,0,0]) rotate([90,0,90]) Trestle();
-      translate([spoolwidth/2 + hubbasethick + spoolinnerslop/4, 0, barz])
+      color("red") translate([spoolbarlen/2,0,0])
+       rotate([90,0,90]) Trestle();
+      color("orange")
+       translate([spoolwidth/2 + hubbasethick + spoolinnerslop*2/3, 0, barz])
        rotate([0,90,0]) AxleWasher();
-      translate([axlepin_x, 0, barz]) rotate([90,0,90]) FtAxlePin();
+      color("orange") translate([axlepin_x, 0, barz])
+       rotate([90,0,90]) FtAxlePin();
+      color("cyan")
+       translate([spoolwidth/2 + hubbasethick + spoolinnerslop*1/3, 0, barz])
+       rotate([0,-90,0]) HubEnd();
     }
   }
   %translate([0,0,barz]) DemoSpool();
@@ -227,4 +275,5 @@ module Demo(){
 //TestKit();
 //Plug(d=1);
 //ExtenderPillars(80,12,8, baseweb=true);
+//HubEnd();
 Demo();