pattress-boxes-3-cover: Peg: tests reveal that SZ0 is best

[reprap-play.git] / filamentspool.scad

diff --git a/filamentspool.scad b/filamentspool.scad
index 5b68cb21e3bfa5abd058cbf3bc0fe98a33307e96..376c8c6c2f01b04511f81a317d565248d84f5c98 100644 (file)
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -465,10 +465,19 @@ storarm_base_mind = 2;
 
 storarm_cope_hubaxle_mk1 = true;
 
+storarm_screw_hole = 4;
+storarm_screw_hole_slop = 0.5;
+storarm_besides_hole = 4;
+
+storarm_under_hole = 5;
+storarm_screw_hole_head = 8.8;
+storarm_screw_hole_head_slop = 1.5;
+
 // calculated
 
 storarm_axlerad = hubaxlerad - storarm_axleslop;
-storarm_mainlen = hubaxlelen + (storarm_cope_hubaxle_mk1 ? 10 : 0);
+storarm_mainlen = hubaxlelen*2 + storarm_axleslop
+  + (storarm_cope_hubaxle_mk1 ? 10 : 0);
 storarm_totlen = storarm_mainlen + storarm_hooklen;
 
 storarm_mid_off_y = storarm_axlerad;
@@ -506,7 +515,25 @@ module StorageArmBaseTemplate(){
   square([storarm_base_w, storarm_base_h]);
 }
 
-module StorageArm(){ ////toplevel
+module StorageArmAtMountingHoles(){
+  bes = storarm_besides_hole + storarm_screw_hole;
+
+  x0 = bes;
+  x1 = storarm_base_w-bes;
+  y1 = storarm_base_h - bes;
+  y0 = bes;
+
+  for (pos=[ [x0, y1],
+            [x1, y1],
+            [x1, y0] ]) {
+    rotate([0,90,0])
+      translate([pos[0] - storarm_base_w,
+                pos[1] - storarm_base_off_y, -storarm_base_d])
+      children();
+  }
+}
+
+module StorageArmRight(){ ////toplevel
   shear = storarm_hookheight / (storarm_mainlen/2);
 
   StorageArmDiagPart(-1, storarm_mainlen/2+1, shear, 0);
@@ -526,10 +553,35 @@ module StorageArm(){ ////toplevel
          StorageArmBaseTemplate();
        StorageArmDiagPart(-1, 0, shear, 0);
       }
+      StorageArmAtMountingHoles(){
+       cylinder(r= storarm_screw_hole_head/2,
+                h=10);
+      }
+    }
+    StorageArmAtMountingHoles(){
+      translate([0,0,-1])
+       cylinder(r= (storarm_screw_hole + storarm_screw_hole_slop)/2 ,
+                h=20);
+      translate([0,0,storarm_under_hole])
+       cylinder(r= (storarm_screw_hole_head + storarm_screw_hole_head_slop)/2,
+                h=20);
     }
   }
 }
 
+module StorageArmLeft(){ ////toplevel
+  mirror([1,0,0]) StorageArmRight();
+}
+
+module StorArmHoleTest(){ ////toplevel
+  sz = storarm_screw_hole_head + storarm_besides_hole*2;
+  intersection(){
+    StorageArmRight();
+    translate([-50, -storarm_base_off_y, -1])
+      cube([100, sz, sz+1]);
+  }
+}
+
 
 module Demo(){
   translate([-hubeffrad-30,50,0]) Hub();
@@ -547,5 +599,6 @@ module Demo(){
 //AxleWasher();
 //AxlePin();
 //AxleFrictionWasher();
-StorageArm();
+//StorageArmLeft();
+//StorArmHoleTest();
 //Demo();