slop=0.5;
bigslop=slop*2;
-hubeffrad = 30; // + 55;
+exteffrad = 85;
+hubeffrad = 30;
hubbigrad = 20;
hublwidth = 3;
hubstemwidth = 2;
armendwallthick=2.5;
armendbasethick=1.2;
+axlehorizoffset = 12.5;
+axlevertheight = 80;
+towercliph = 16;
+towerclipcount = 3;
+towerpillarw = 5;
+
+washerthick = 1.2;
+washerrad = hubaxlerad + 7.5;
+
ratchetpawl=ratchetstep-ratchettooth-bigslop*2;
include <doveclip.scad>
include <cliphook.scad>
include <filamentteeth.scad>
+include <splitpin.scad>
channelwidth = prongthick + slop;
channeldepth = prongwidth + ratchettoothheight;
totalheight = channeldepth + armendbasethick;
stalkwidth = prongwidth + prongstalkxwidth;
-module ArmEnd(length=120){
+module ArmEnd(length=120){ ////toplevel
translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
rotate([0,0,-90])
DoveClipPairBase(h=doveclipheight);
}
}
-module FilamentCup() {
+module FilamentCup() { ////toplevel
FilamentCupHandle();
dx = cupbigrad + prongwidth;
}
}
-module CupSecuringClip(){
+module CupSecuringClip(){ ////toplevel
wingswidth = wingspoke*2 + overclipthick*2 + overcliproundr*2 + totalwidth;
difference(){
union(){
}
}
-module ArmDoveClipPin(){
+module ArmDoveClipPin(){ ////toplevel
DoveClipPin(h=doveclipheight);
}
-module Hub(){
+module Hub(){ ////toplevel
difference(){
cylinder($fn=60, h=hublthick, r=hubbigrad);
translate([0,0,-1])
translate([0,0,-1]) cylinder($fn=60, h=hubaxlelen+2, r=axlerad);
}
hole = hubeffrad - hubbigrad - DoveClip_depth() - hublwidth*2;
- holewidth = DoveClip_width() - hubstemwidth*2;
+ holewidth = DoveClipPairSane_width() - hubstemwidth*2;
for (ang=[0,120,240])
rotate([0,0,ang]) {
difference() {
}
}
+module ArmExtender(){ ////toplevel
+ DoveClipExtender(length=exteffrad-hubeffrad,
+ ha=doveclipheight,
+ hb=doveclipheight);
+}
+
+module AxleSplitPin(){ ////toplevel
+ SplitPin();
+}
+
+module Axle(){ ////toplevel
+ pillarswidth = DoveClipPairSane_width(towerclipcount);
+
+ translate([-axlehorizoffset, -axlevertheight, 0]) {
+ rotate([0,0,-90])
+ DoveClipPairSane(h=towercliph, count=towerclipcount, baseextend=3);
+ translate([0, DoveClip_depth(), 0])
+ rotate([0,0,90])
+ ExtenderPillars(axlevertheight - DoveClip_depth(),
+ pillarswidth, towercliph,
+ pillarw=towerpillarw);
+ }
+
+ axleclearlen = hubaxlelen + slop*2 + washerthick;
+ axlerad = hubaxlerad+slop;
+ bump = axlerad * 0.2;
+ shift = axlerad-bump;
+ joinbelowallow = 3;
+
+ intersection(){
+ difference() {
+ translate([0, 0, shift])
+ union(){
+ translate([-1, 0, 0])
+ rotate([0,90,0])
+ cylinder(r = axlerad, h = 1 + axleclearlen + 6);
+ mirror([1,0,0]) rotate([0,90,0])
+ cylinder(r = washerrad, h = 3);
+ intersection(){
+ mirror([1,0,0]) rotate([0,90,0])
+ cylinder(r = towercliph - shift,
+ h = pillarswidth/2 + axlehorizoffset);
+ translate([-50, -joinbelowallow, -50])
+ cube([100, joinbelowallow+50, 100]);
+ }
+ }
+ translate([axleclearlen, 0, 0])
+ mirror([0,0,1])
+ rotate([0,0,90])
+ SplitPinCavity();
+ }
+ translate([-50,-50,0]) cube([100,100,100]);
+ }
+}
+
+module AxleWasher(){ ////toplevel
+ difference(){
+ cylinder(h=washerthick, r=washerrad);
+ translate([0,0,-1]) cylinder(h=washerthick+2, r=hubaxlerad+slop);
+ }
+}
+
//ArmEnd();
//FilamentCup();
//CupSecuringClip();
//Hub();
+//ArmExtender();
+//Axle();
+AxleWasher();