include <cliphook.scad>
+include <filamentteeth.scad>
-rad=18;
+rad=19;
h=3.5;
-w=1.5;
+w=2.5;
looprad=2.5;
loopw=w;
d=0.01;
-module FilamentClipTeeth(teethw=1.5,
- stembendd=0.5, stembendl=7, teethxl=1.5) {
- gapw = fdia-stembendd*2;
- teethbigw = gapw + teethw*2;
- basew = fdia+teethw*2-stembendd*2;
- based = basew/3;
-
- translate([-based, -basew/2, 0]) cube([based, basew, h]);
- difference() {
- union() {
- translate([-d, -teethbigw/2, 0])
- cube([d+stembendl + teethw, teethbigw, h]);
-// translate([
-// stembigw = fdia + stembend
-// translate([-d, -stemw,
- linear_extrude(height=h) {
- translate([stembendl-fdia/2, 0]) circle(fdia/2+teethw, $fn=30);
- }
- }
- translate([0,0,-1]) {
- translate([0,-gapw/2])
- cube([stembendl+teethxl+1, gapw, h+2]);
- linear_extrude(height=h+2) {
- translate([stembendl-fdia/2, 0]) circle(fdia/2, $fn=30);
- }
- }
- }
-
- for (mirr=[0:1]) {
- mirror([0,mirr,0]) {
- translate([stembendl + teethw, gapw/2, 0])
- rotate([0,0,30])
- cube([teethxl, teethw, h]);
- }
- }
-}
-
module our_ClipHook(ye){
- ClipHook(h=h, w=w, g=0.6, k=1.5, g=0.6, ye=ye);
+ ClipHook(h=h, w=w, g=0.6, k=1.5, g=0.6, ye=ye, cupcaph=0.5, cupcapg=0.8);
}
module FilamentClip() {
- rotate([0,0,-60]) {
+ rotate([0,0,-70]) {
translate([0,rad-1.5,0]) {
rotate([0,0,8])
our_ClipHook(ye=-1.3);
}
}
- rotate([0,0,-30]) {
+ rotate([0,0,-35]) {
translate([0,rad,0]) {
rotate([0,0,180])
our_ClipHook(ye=0.8);
linear_extrude(height=h) {
assign($fn=80) {
- FlatArc(0,0, rad-w/2,rad+w/2, 80,365);
+ FlatArc(0,0, rad-w/2,rad+w/2, 80,350);
}
assign($fn=30) {
FlatArc(0,rad+looprad+w, looprad,looprad+loopw);
for (mir=[0,1]) {
mirror([mir,0,0])
- rotate([0,0,-20])
- translate([rad+w+fdia/2, 0, 0])
- rotate([0,0,100])
- FilamentClipTeeth();
+ rotate([0,0,-40])
+ translate([rad+w*0.3+teethw*0.3+fdia/2, 0, 0])
+ rotate([0,0,95])
+ FilamentTeeth(fdia=fdia, h=h);
}
}
FilamentClip();
-