jack_pos = [ 13.92, 7.96 ];
jack_dia = 9.1 + .5; // some jack I had lying around
+noisecancelmic_pos = [ 19.54, 7.37 ]; // from rhs
+noisecancelmic_dia = 1.75;
+
+rearspeaker_pos_bl = [ 14.92, 18.72 ];
+rearspeaker_size = [ 3.76, 7.36 ];
+
case_th_bottom = 2.5;
case_th_lid = 2.5;
case_th_side = 2;
strut_min_at_end = 1.5;
+rearspeaker_gap = [ 1.0, 1.0 ]; // each side
+
// ---------- calculated ----------
phone_width = (phone + bumper*2)[0];
square([abs(ab[0]), abs(ab[1])]);
}
module circleat(c,r) { translate(c) circle(r); }
+module linextr(z0,z1) {
+ translate([0,0,z0])
+ linear_extrude(height=z1-z0)
+ children();
+}
module KeeperProfile(slant=0){
use_e = kppe + [0,-1] * slant * keeper_inner_width / keeper_slant_slope;
}
}
-module CaseBase_botflip() {
- for (bot=[0,1]) {
+module CaseBase_botflip(yn=[0,1]) {
+ for ($botflip=yn) {
translate([0, -phone_height/2, 0])
- mirror([0, bot, 0])
+ mirror([0, $botflip, 0])
translate([0, phone_height/2, 0])
children();
}
[phone_width, -phone_height] + [-1,+1] * phone_cnr_rad);
}
+module CaseAperture(pos, dia, $fn) {
+ theta = 180/$fn;
+ translate([ pos[0] + bumper[0],
+ -epp2i[0],
+ -pos[1] ])
+ rotate([-90, theta, 0])
+ cylinder(r = dia/2 / cos(theta),
+ h = 60);
+}
+
module SideButton(y, y_ref_sign, l){
// y_ref_sign:
// +1 measured from top of actual phone to top of button
}
}
+module OrdinaryRearAperture(rhs,bot, pos){
+ CaseBase_rhsflip(rhs) CaseBase_botflip(bot)
+ linextr(-20, 20)
+ mirror([0,1])
+ translate(pos + bumper)
+ children();
+}
+
+module OrdinaryRearApertures(){
+ // rear speaker
+ OrdinaryRearAperture(1,1, rearspeaker_pos_bl)
+ rectfromto(-rearspeaker_gap,
+ rearspeaker_size + rearspeaker_gap);
+}
+
+module RearCameraAperture(){
+ CaseBase_rhsflip([1])
+ mirror([0, 0, 1])
+ linear_extrude(height = 20)
+ mirror([0, 1, 0])
+ translate(bumper)
+ rectfromto(camera_pos_tl, camera_pos_br);
+}
+
module CaseBase(){
AroundEdges(epp3[1], case_th_bottom, 1)
EdgeProfile();
}
// front camera
- CaseBase_rhsflip([1])
- mirror([0, 0, 1])
- linear_extrude(height = 20)
- mirror([0, 1, 0])
- translate(bumper)
- rectfromto(camera_pos_tl, camera_pos_br);
+ RearCameraAperture();
// struts (invisible, because they're buried in the case)
Struts(epp2i[0], epp2i[1] - case_th_bottom, case_th_bottom);
}
}
- // jack
- translate([ jack_pos[0] + bumper[0],
- -epp2i[0],
- -jack_pos[1] ])
- rotate([-90, 22.5, 0])
- cylinder(r = jack_dia/2 / cos(22.5),
- h = 60,
- $fn=8);
+ // apertures along top edge
+ CaseAperture(jack_pos, jack_dia, 8);
+ CaseBase_rhsflip([1])
+ CaseAperture(noisecancelmic_pos, noisecancelmic_dia, 20);
+
+ OrdinaryRearApertures();
}
}
}
module TestLidWidthPrint(){ ////toplevel
- rotate([0,180.0]) TestLidWidth();
+ rotate([0,180.0]) intersection(){
+ Lid();
+ TestSelectWidth();
+ }
+}
+
+module TestSelectRearAperture(){
+ minkowski(){
+ union() children();
+ translate([20, 0,0])
+ cube([42, 2, 1], center=true);
+ }
}
module TestSelectCamera(){
- CaseBase_rhsflip(1)
- translate([0,0,-25])
- linear_extrude(height = 50)
- mirror([0, 1, 0])
- rectfromto([-20, -20],
- camera_pos_br + bumper + [ 5, 5 ]);
+ minkowski(){
+ TestSelectRearAperture()
+ RearCameraAperture();
+ cube([0.1, 50, 0.1]);
+ }
+}
+
+module TestSelectOrdinaryRearApertures(){
+ TestSelectRearAperture()
+ OrdinaryRearApertures();
}
module TestCamera(){ ////toplevel
union(){
TestSelectFrame();
TestSelectCamera();
+ TestSelectOrdinaryRearApertures();
}
}
}