+++ /dev/null
-Development
-* Added an expert parameter for the wipe tower size, and made brim go around the wipe tower
-* Added experimental support for printing with the Doodle3D WiFi box
-* Updated object boundaries for multi-object prints, allows for tighter fitting of objects on the build platform
-* Updated time-estimate to greatly improve accuracy of the estimate.
-* Fixed problem with retractions not happening when they should.
-* Added keyboard control for the 3D window to look around with cursor keys.
-
-Ultimaker2 - Firmware update - 13.12
-* Fixed the problem where aborting a print did not always home the head.
-* Fixed bug in acceleration planning causing slow moves on rare occasions.
-* Disable the normal menus during USB printing, and support for USB based menus.
-* Disable stepper drivers after print is finished or aborted, so you can manually move the head.
-* Expert feature: Support M907 for setting the motor current.
-
-Ultimaker Original - Firmware update - 13.12
-* Fixed bug in acceleration planning causing slow moves on rare occasions.
-* Updated to new ErikZalm Marlin base, fixing the long standing slower retraction bug.
-
-13.11.2
-* Adjusted the gantry height to 55mm for the Ultimaker, as 60mm was 3mm to high for the default setup with an V2 hotend.
-* Added disallowed zones for UM2
-* Added ooze-shield for dual-color printing
-* Added wipe tower for dual-extrusion
-* Added no-go zones for UM2 glass clips
-
-Ultimaker2 - Firmware update - 13.11-2
-* Fixed UM2 build volume offset so that you do not print off the glass plate.
-* Slightly tweaked the filament change procedure so there is less chance of a blob staying behind.
-* Slightly tweaked the SD-Card error problems.
-* Added LED settings to Tune menu
-* Start heating the nozzles when the bed is nearing its final temperature, so the nozzles do not sit hot.
-* Make sure all commands are finished before starting a print or changing material. This could cause issues when you where too fast.
-
-13.11
-* Added imageToMesh tool to load images as 3D height maps
-* Fixed Z support distance when using "everywhere" support.
-* Updated to new version of clipper to fix rare slicing bugs that resulted in odd paths.
-* Fixed "Reset profile" so it no longer resets the machine settings.
-* Updated support material so support is smoother and has less small sections which are hard to remove.
-* Fixed start-gcode when using dual-support material
-* Change how the fan is handled on lower layer to improve UM2 printing.
-* Fix that retraction is enabled when selecting UM2 or RepRap.
-* Scale down very large models, or scale up very tiny models automagicly.
-* Fixed skirt and brim to go around the support instead of under it.
-* Added spiralize mode
-
-Ultimaker2 - Firmware update - 13.10-5
-* Fixed SD-Card read error
-* Added feature to store your own material presets
-* Fixed the 280C ABS problem, causing a temperature sensor error
-
-13.10
-* Added YouMagine upload button
-* Added multiple machine support
-* Redone support material
~ianmdlvl / cura.git / blobdiff