bike-lipo-box: provide BoxPrint

[reprap-play.git] / bike-lipo-box.scad

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index c7fc125f06e9780ce65507ebf92f04abc5850cf9..b8a6e424c8b6964703c43ba041beb7c56755236a 100644 (file)
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -3,6 +3,7 @@
 include <commitid.scad>
 include <utils.scad>
 include <sealing-box.scad>
+include <bike-lipo-box-gland.scad>
 
 pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
 pxp6012_rad_outer = 32.0 / 2 - 0.5;
@@ -18,10 +19,12 @@ s1930_behind = 3;
 
 totx_inner = 180;
 toty_outer = 95;
-totz_outer = 31;
+totz_inner = 28.0;
 
 wallthick = 2.5;
 
+cabledia = 8.7;
+
 strap_w = 5;
 strap_th = 4;
 strap_pillar = 3;
@@ -32,7 +35,7 @@ strap_over = 2;
 
 totx_outer = totx_inner + wallthick*2;
 toty_inner = toty_outer - wallthick*2;
-totz_inner = totz_outer - wallthick*2;
+totz_outer = totz_inner + wallthick*2;
 
 sb_box_sz = [totx_outer, totz_outer, toty_inner];
 
@@ -137,6 +140,15 @@ module ProfileDemos(){ ////toplevel
   color("red") translate([-5,0]) square([1,ts_totz_inner]);
 }
 
+module AtGlands(){
+  for (dgy=[-15,-45]) {
+    translate([totx_inner + wallthick - $sealingbox_cnrrad * .3,
+              toty_inner + dgy,
+              totz_inner/2])
+      children();
+  }
+}
+
 module Box(){ ////toplevel
   $sealingbox_sz = sb_box_sz;
 
@@ -156,18 +168,14 @@ module Box(){ ////toplevel
        rotate([90,0,90])
        S1930_Positive();
 
-      // straps for lipo
-      for (sx= [ 45, 80, 110 ]) {
-       for (sy= [ 10, 40 ]) {
-         translate([sx - strap_x_tot, sy, 0])
-         difference(){
-           translate([0,0, -0.1])
-             cube([strap_x_tot, strap_pillard, strap_th + strap_over]);
-           translate([strap_pillar, -1, 0])
-             cube([strap_w, strap_pillard+2, strap_th]);
-         }
-       }
+      // keepers for lipo
+      for (kx= [ 40, 80, 120 ]) {
+       translate([kx, 40, -1])
+         cube([10, 5, 8 +1]);
       }
+
+      AtGlands()
+       GlandPositive(cabledia);
     }
 
     // charging connector
@@ -179,9 +187,17 @@ module Box(){ ////toplevel
     translate([switch_x, toty_inner, totz_inner/2])
       rotate([90,0,90])
       S1930_Negative();
+
+    AtGlands()
+      GlandNegative(cabledia);
   }
 }
 
+module BoxPrint(){ ////toplevel
+  rotate([-90,0,0])
+    Box();
+}
+
 //TestWall();
 //ProfileDemos();
 //TestSealBox();