-
-udev - a userspace implementation of devfs
-
-For more information on the design, and structure of this project, see the
-files in the docs/ directory.
-
-To use:
-
-- You must be running a 2.6 version of the Linux kernel.
-
-- Make sure sysfs is mounted. udev will figure out where sysfs is mounted, but
- the traditional place for it is at /sys. You can mount it by hand by running:
- mount -t sysfs none /sys
-
-- Make sure you have the latest version of the linux-hotplug scripts. They are
- available at linux-hotplug.sf.net or from your local kernel.org mirror at:
- kernel.org/pub/linux/utils/kernel/hotplug/
- They are required in order for udev to work properly.
-
- If for some reason you do not install the hotplug scripts, you must tell the
- kernel to point the hotplug binary at wherever you install udev at. This can
- be done by:
- echo "/sbin/udev" > /proc/sys/kernel/hotplug
-
-- Build the project:
- make
-
-- Install the project:
- make install
-
- This will put the udev binary in /sbin, create the /udev and /etc/udev
- directories, and place the udev configuration files in /etc/udev. You
- will probably want to edit the namedev.* files to create custom naming
- rules. More info on how the config files are set up are contained in
- comments in the files, and is located in the documentation.
-
-- Add and remove devices from the system and marvel as nodes are created
- and removed in /udev/ based on the device types.
-
-- If you later get sick of it, uninstall it:
- make uninstall
-
-
-Things are still quite rough, and it's a bit beyond proof of concept
-code. Help is very much appreciated, see the TODO file for a list of
-things left to be done.
-
-If you want to build using klibc, use the Makefile.klibc file:
- - read the klibc/klibc/klibc/README file for how to set up the linux
- symlink properly.
- - make clean
- - make -f Makefile.klibc
-and marvel at the tiny binary you just created :)
-
-Any comment/questions/concerns please let me know.
-
-greg k-h
-greg@kroah.com
-
-
+udev - userspace device management
+
+Integrating udev in the system has complex dependencies and differs from distro
+to distro. All major distros depend on udev these days and the system may not
+work without a properly installed version. The upstream udev project does not
+recommend to replace a distro's udev installation with the upstream version.
+
+Tools and rules shipped by udev are not public API and may change at any time.
+Never call any private tool in /lib/udev from any external application, it might
+just go away in the next release. Access to udev information is only offered
+by udevadm and libudev. Tools and rules in /lib/udev, and the entire content of
+the /dev/.udev directory is private to udev and does change whenever needed.
+
+Requirements:
+ - Version 2.6.27 of the Linux kernel with sysfs, procfs, signalfd, inotify,
+ unix domain sockets, networking and hotplug enabled:
+ CONFIG_HOTPLUG=y
+ CONFIG_UEVENT_HELPER_PATH=""
+ CONFIG_NET=y
+ CONFIG_UNIX=y
+ CONFIG_SYSFS=y
+ CONFIG_SYSFS_DEPRECATED*=n
+ CONFIG_PROC_FS=y
+ CONFIG_TMPFS=y
+ CONFIG_INOTIFY_USER=y
+ CONFIG_SIGNALFD=y
+ CONFIG_TMPFS_POSIX_ACL=y (user ACLs for device nodes)
+ CONFIG_BLK_DEV_BSG=y (SCSI devices)
+
+ - For reliable operations, the kernel must not use the CONFIG_SYSFS_DEPRECATED*
+ option.
+
+ - Unix domain sockets (CONFIG_UNIX) as a loadable kernel module may work,
+ but it is not supported.
+
+ - The proc filesystem must be mounted on /proc, the sysfs filesystem must
+ be mounted at /sys. No other locations are supported by udev.
+
+ - The system must have the following group names resolvable at udev startup:
+ disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, kmem.
+ Especially in LDAP setups, it is required, that getgrnam() is able to resolve
+ these group names with only the rootfs mounted, and while no network is
+ available.
+
+ - To build all udev extras, libacl, libglib2, libusb, usbutils, pciutils,
+ gperf are needed. These dependencies can be disabled with the
+ --disable-extras option.
+
+Operation:
+ Udev creates and removes device nodes in /dev, based on events the kernel
+ sends out on device discovery or removal.
+
+ - Early in the boot process, the /dev directory should get a 'tmpfs'
+ filesystem mounted, which is maintained by udev. Created nodes or changed
+ permissions will not survive a reboot, which is intentional.
+
+ - The content of /lib/udev/devices directory which contains the nodes,
+ symlinks and directories, which are always expected to be in /dev, should
+ be copied over to the tmpfs mounted /dev, to provide the required nodes
+ to initialize udev and continue booting.
+
+ - The deprecated hotplug helper /sbin/hotplug should be disabled in the
+ kernel configuration, it is not needed today, and may render the system
+ unusable because the kernel may create too many processes in parallel
+ so that the system runs out-of-memory.
+
+ - All kernel events are matched against a set of specified rules in
+ /lib/udev/rules.d which make it possible to hook into the event
+ processing to load required kernel modules and setup devices. For all
+ devices the kernel exports a major/minor number, udev will create a
+ device node with the default kernel name, or the one specified by a
+ matching udev rule.
+
+Please direct any comment/question to the linux-hotplug mailing list at:
+ linux-hotplug@vger.kernel.org