setting('solid_bottom', True, bool, 'expert', _('Infill')).setLabel(_("Solid infill bottom"), _("Create a solid bottom surface, if set to false the bottom is filled with the fill percentage. Useful for buildings."))
setting('fill_overlap', 15, int, 'expert', _('Infill')).setRange(0,100).setLabel(_("Infill overlap (%)"), _("Amount of overlap between the infill and the walls. There is a slight overlap with the walls and the infill so the walls connect firmly to the infill."))
setting('support_type', 'Lines', ['Grid', 'Lines'], 'expert', _('Support')).setLabel(_("Structure type"), _("The type of support structure.\nGrid is very strong and can come off in 1 piece, however, sometimes it is too strong.\nLines are single walled lines that break off one at a time. Which is more work to remove, but as it is less strong it does work better on tricky prints."))
-setting('support_angle', 60, float, 'expert', _('Support')).setRange(0,90).setLabel(_("Overhang angle for support (deg)"), _("The minimal angle that overhangs need to have to get support. With 90 degree being horizontal and 0 degree being vertical."))
+setting('support_angle', 60, float, 'expert', _('Support')).setRange(0,90).setLabel(_("Overhang angle for support (deg)"), _("The minimal angle that overhangs need to have to get support. Setting this to 0 degrees means every overhang will be supported. 90 degrees effectively disables support."))
setting('support_fill_rate', 15, int, 'expert', _('Support')).setRange(0,100).setLabel(_("Fill amount (%)"), _("Amount of infill structure in the support material, less material gives weaker support which is easier to remove. 15% seems to be a good average."))
setting('support_xy_distance', 0.7, float, 'expert', _('Support')).setRange(0,10).setLabel(_("Distance X/Y (mm)"), _("Distance of the support material from the print, in the X/Y directions.\n0.7mm gives a nice distance from the print so the support does not stick to the print."))
setting('support_z_distance', 0.15, float, 'expert', _('Support')).setRange(0,10).setLabel(_("Distance Z (mm)"), _("Distance from the top/bottom of the support to the print. A small gap here makes it easier to remove the support but makes the print a bit uglier.\n0.15mm gives a good seperation of the support material."))
""", str, 'alteration', 'alteration')
setting('startMode', 'Simple', ['Simple', 'Normal'], 'preference', 'hidden')
-setting('simpleModeProfile', '2_normal', str, 'hidden', 'hidden')
-setting('simpleModeMaterial', '1_pla', str, 'hidden', 'hidden')
+setting('simpleModeProfile', 'Standard', str, 'hidden', 'hidden')
+setting('simpleModeMaterial', 'PLA', str, 'hidden', 'hidden')
+setting('simpleModeMaterialType', 'Beginner', str, 'hidden', 'hidden')
setting('oneAtATime', 'False', bool, 'preference', 'hidden')
setting('lastFile', os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'resources', 'example', 'Rocktopus.stl')), str, 'preference', 'hidden')
setting('save_profile', 'False', bool, 'preference', 'hidden').setLabel(_("Save profile on slice"), _("When slicing save the profile as [stl_file]_profile.ini next to the model."))
setting('model_colour2', '#CB3030', str, 'preference', 'hidden').setLabel(_('Model colour (2)'), _('Display color for second extruder'))
setting('model_colour3', '#DDD93C', str, 'preference', 'hidden').setLabel(_('Model colour (3)'), _('Display color for third extruder'))
setting('model_colour4', '#4550D3', str, 'preference', 'hidden').setLabel(_('Model colour (4)'), _('Display color for forth extruder'))
-setting('printing_window', 'Pronterface UI', ['Basic'], 'preference', 'hidden').setLabel(_('Printing window type'), _('Select the interface used for USB printing.'))
setting('window_maximized', 'True', bool, 'preference', 'hidden')
setting('window_pos_x', '-1', float, 'preference', 'hidden')
setting('serial_baud', 'AUTO', str, 'machine', 'hidden').setLabel(_("Baudrate"), _("Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600"))
setting('serial_baud_auto', '', int, 'machine', 'hidden')
+setting('toolhead', 'Default', str, 'machine', 'hidden').setLabel(_("Installed Tool Head"), _("Which tool head is currently installed. This setting is only used by LulzBot machines."))
+setting('toolhead_shortname', '', str, 'machine', 'hidden')
setting('extruder_head_size_min_x', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards X min (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head."))
setting('extruder_head_size_min_y', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards Y min (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head."))
setting('extruder_head_size_max_x', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards X max (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head."))
return 1
return n
+def getMachineName(index = None):
+ name = getMachineSetting('machine_name', index)
+ type = getMachineSetting('machine_type', index)
+ if type.startswith('lulzbot_'):
+ toolhead = getMachineSetting('toolhead_shortname', index)
+ if toolhead != '':
+ return "%s (%s)" % (name, toolhead)
+ return name
+
def setActiveMachine(index):
global _selectedMachineIndex
_selectedMachineIndex = index
def getMachineCenterCoords():
if getMachineSetting('machine_center_is_zero') == 'True':
return [0, 0]
- elif getMachineSetting('machine_type') == 'lulzbot_mini':
- return [(getMachineSettingFloat('machine_width') / 2) + 2.5, (getMachineSettingFloat('machine_width') / 2) + 0.5]
+ elif getMachineSetting('machine_type') == 'lulzbot_mini' or \
+ getMachineSetting('machine_type') == 'lulzbot_TAZ_6':
+ return [(getMachineSettingFloat('machine_width') / 2) + 2.5,
+ (getMachineSettingFloat('machine_width') / 2) + 0.5]
return [getMachineSettingFloat('machine_width') / 2, getMachineSettingFloat('machine_depth') / 2]
#Returns a list of convex polygons, first polygon is the allowed area of the machine,
#postfix = ';CURA_PROFILE_STRING:%s\n' % (getProfileString())
return unicode(prefix + re.sub("(.)\{([^\}]*)\}", replaceTagMatch, alterationContents).rstrip() + '\n' + postfix).strip().encode('utf-8') + '\n'
+def hasEmptyHeadSizeSettings(n):
+ return getMachineSetting('extruder_head_size_min_x', n) == '0.0' and \
+ getMachineSetting('extruder_head_size_max_x', n) == '0.0' and \
+ getMachineSetting('extruder_head_size_min_y', n) == '0.0' and \
+ getMachineSetting('extruder_head_size_max_y', n) == '0.0' and \
+ getMachineSetting('extruder_head_size_height', n) == '0.0'
+
def performVersionUpgrade():
- putPreference("printing_window", "Advanced")
for n in xrange(0, getMachineCount()):
# This is a hack around an issue where the machine type in the wizard
# changed and causes some people to have it set to lulzbot_TAZ and some
if getMachineSetting('machine_type', n) == 'lulzbot_TAZ':
putMachineSetting('machine_type', 'lulzbot_TAZ_4', n)
+ machine_type = getMachineSetting('machine_type', n)
+ isLulzBot = machine_type.startswith('lulzbot_')
+ if isLulzBot and getMachineSetting('toolhead', n) == 'Default':
+ if machine_type == 'lulzbot_mini':
+ putMachineSetting('toolhead', 'Single Extruder V2', n)
+ putMachineSetting('toolhead_shortname', '', n)
+ elif machine_type == 'lulzbot_TAZ_4':
+ putMachineSetting('toolhead', 'Single Extruder V1', n)
+ putMachineSetting('toolhead_shortname', '', n)
+ putMachineSetting('machine_type', 'lulzbot_TAZ_4_SingleV1', n)
+ elif machine_type == 'lulzbot_TAZ_5':
+ putMachineSetting('toolhead', 'Single Extruder V2 (0.35mm nozzle)', n)
+ putMachineSetting('toolhead_shortname', '0.35 nozzle', n)
+ putMachineSetting('machine_type', 'lulzbot_TAZ_5_035nozzle', n)
+ machine_name = getMachineSetting('machine_name', n)
+ if machine_name.endswith(" (0.35 nozzle)"):
+ putMachineSetting('machine_name', machine_name.replace(" (0.35 nozzle)", ""), n)
+ elif machine_type == 'lulzbot_TAZ_5_05nozzle':
+ putMachineSetting('toolhead', 'Single Extruder V2 (0.5mm nozzle)', n)
+ putMachineSetting('toolhead_shortname', '0.5 nozzle', n)
+ putMachineSetting('machine_type', 'lulzbot_TAZ_5_05nozzle', n)
+ machine_name = getMachineSetting('machine_name', n)
+ if machine_name.endswith(" (0.5 nozzle)"):
+ putMachineSetting('machine_name', machine_name.replace(" (0.5 nozzle)", ""), n)
+
# Change TAZ print bed so prints are centered when scaled to the max
- if getMachineSetting('machine_type', n).startswith('lulzbot_TAZ_') and \
+ if machine_type.startswith('lulzbot_TAZ_') and \
getMachineSetting('machine_width', n) == '298':
- profile.putMachineSetting('machine_width', '290')
+ putMachineSetting('machine_width', '290', n)
+
+ #Set valid extruder head size numbers for Mini
+ if machine_type == 'lulzbot_mini' and hasEmptyHeadSizeSettings(n):
+ putMachineSetting('extruder_head_size_min_x', '40', n)
+ putMachineSetting('extruder_head_size_max_x', '75', n)
+ putMachineSetting('extruder_head_size_min_y', '25', n)
+ putMachineSetting('extruder_head_size_max_y', '55', n)
+ putMachineSetting('extruder_head_size_height', '17', n)
\ No newline at end of file
~ianmdlvl / cura.git / blobdiff