setting('solid_layer_thickness', 0.6, float, 'basic', _('Fill')).setRange(0).setLabel(_("Bottom/Top thickness (mm)"), _("This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiple of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part."))
setting('fill_density', 20, float, 'basic', _('Fill')).setRange(0, 100).setLabel(_("Fill Density (%)"), _("This controls how densely filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough.\nThis won't effect the outside of the print and only adjusts how strong the part becomes."))
setting('nozzle_size', 0.4, float, 'advanced', _('Machine')).setRange(0.1,10).setLabel(_("Nozzle size (mm)"), _("The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings."))
-setting('print_speed', 50, float, 'basic', _('Speed & Temperature')).setRange(1).setLabel(_("Print speed (mm/s)"), _("Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this."))
-setting('print_temperature', 220, int, 'basic', _('Speed & Temperature')).setRange(0,340).setLabel(_("Printing temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
-setting('print_temperature2', 0, int, 'basic', _('Speed & Temperature')).setRange(0,340).setLabel(_("2nd nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
-setting('print_temperature3', 0, int, 'basic', _('Speed & Temperature')).setRange(0,340).setLabel(_("3th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
-setting('print_temperature4', 0, int, 'basic', _('Speed & Temperature')).setRange(0,340).setLabel(_("4th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
-setting('print_bed_temperature', 70, int, 'basic', _('Speed & Temperature')).setRange(0,340).setLabel(_("Bed temperature (C)"), _("Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."))
-setting('support', 'None', ['None', 'Touching buildplate', 'Everywhere'], 'basic', _('Support')).setLabel(_("Support type"), _("Type of support structure build.\n\"Touching buildplate\" is the most commonly used support setting.\n\nNone does not do any support.\nTouching buildplate only creates support where the support structure will touch the build platform.\nEverywhere creates support even on top of parts of the model."))
-setting('platform_adhesion', 'None', ['None', 'Brim', 'Raft'], 'basic', _('Support')).setLabel(_("Platform adhesion type"), _("Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and the recommended option.\nRaft adds a thick raster at below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)"))
-setting('support_dual_extrusion', 'Both', ['Both', 'First extruder', 'Second extruder'], 'basic', _('Support')).setLabel(_("Support dual extrusion"), _("Which extruder to use for support material, for break-away support you can use both extruders.\nBut if one of the materials is more expensive then the other you could select an extruder to use for support material. This causes more extruder switches.\nYou can also use the 2nd extruder for soluble support materials."))
+setting('print_speed', 50, float, 'basic', _('Speed and Temperature')).setRange(1).setLabel(_("Print speed (mm/s)"), _("Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this."))
+setting('print_temperature', 220, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("Printing temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
+setting('print_temperature2', 0, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("2nd nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
+setting('print_temperature3', 0, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("3th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
+setting('print_temperature4', 0, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("4th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
+setting('print_bed_temperature', 70, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("Bed temperature (C)"), _("Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."))
+setting('support', 'None', [_('None'), _('Touching buildplate'), _('Everywhere')], 'basic', _('Support')).setLabel(_("Support type"), _("Type of support structure build.\n\"Touching buildplate\" is the most commonly used support setting.\n\nNone does not do any support.\nTouching buildplate only creates support where the support structure will touch the build platform.\nEverywhere creates support even on top of parts of the model."))
+setting('platform_adhesion', 'None', [_('None'), _('Brim'), _('Raft')], 'basic', _('Support')).setLabel(_("Platform adhesion type"), _("Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and the recommended option.\nRaft adds a thick raster at below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)"))
+setting('support_dual_extrusion', 'Both', [_('Both'), _('First extruder'), _('Second extruder')], 'basic', _('Support')).setLabel(_("Support dual extrusion"), _("Which extruder to use for support material, for break-away support you can use both extruders.\nBut if one of the materials is more expensive then the other you could select an extruder to use for support material. This causes more extruder switches.\nYou can also use the 2nd extruder for soluble support materials."))
setting('filament_diameter', 2.85, float, 'basic', _('Filament')).setRange(1).setLabel(_("Diameter (mm)"), _("Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to calibrate it, a higher number means less extrusion, a smaller number generates more extrusion."))
setting('filament_diameter2', 0, float, 'basic', _('Filament')).setRange(0).setLabel(_("Diameter2 (mm)"), _("Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter as for nozzle 1."))
setting('filament_diameter3', 0, float, 'basic', _('Filament')).setRange(0).setLabel(_("Diameter3 (mm)"), _("Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter as for nozzle 1."))
setting('submit_slice_information', 'False', bool, 'preference', 'hidden').setLabel(_("Send usage statistics"), _("Submit anonymous usage information to improve next versions of Cura"))
setting('youmagine_token', '', str, 'preference', 'hidden')
setting('filament_physical_density', '1240', float, 'preference', 'hidden').setRange(500.0, 3000.0).setLabel(_("Density (kg/m3)"), _("Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print."))
+setting('language', 'English', str, 'preference', 'hidden').setLabel(_('Language'), _('Change the language in which Cura runs. Switching language requires a restart of Cura'))
setting('active_machine', '0', int, 'preference', 'hidden')
setting('model_colour', '#FFC924', str, 'preference', 'hidden').setLabel(_('Model colour'))
setting('extruder_head_size_max_y', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards Y max (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan is on the left side."))
setting('extruder_head_size_height', '0.0', float, 'machine', 'hidden').setLabel(_("Printer gantry height (mm)"), _("The height of the gantry holding up the printer head. If an object is higher then this then you cannot print multiple objects one for one. 60mm for an Ultimaker."))
-validators.warningAbove(settingsDictionary['filament_flow'], 150, "More flow then 150% is rare and usually not recommended.")
-validators.warningBelow(settingsDictionary['filament_flow'], 50, "More flow then 50% is rare and usually not recommended.")
-validators.warningAbove(settingsDictionary['layer_height'], lambda : (float(getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
+validators.warningAbove(settingsDictionary['filament_flow'], 150, _("More flow then 150% is rare and usually not recommended."))
+validators.warningBelow(settingsDictionary['filament_flow'], 50, _("More flow then 50% is rare and usually not recommended."))
+validators.warningAbove(settingsDictionary['layer_height'], lambda : (float(getProfileSetting('nozzle_size')) * 80.0 / 100.0), _("Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended."))
validators.wallThicknessValidator(settingsDictionary['wall_thickness'])
-validators.warningAbove(settingsDictionary['print_speed'], 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
+validators.warningAbove(settingsDictionary['print_speed'], 150.0, _("It is highly unlikely that your machine can achieve a printing speed above 150mm/s"))
validators.printSpeedValidator(settingsDictionary['print_speed'])
-validators.warningAbove(settingsDictionary['print_temperature'], 260.0, "Temperatures above 260C could damage your machine, be careful!")
-validators.warningAbove(settingsDictionary['print_temperature2'], 260.0, "Temperatures above 260C could damage your machine, be careful!")
-validators.warningAbove(settingsDictionary['print_temperature3'], 260.0, "Temperatures above 260C could damage your machine, be careful!")
-validators.warningAbove(settingsDictionary['print_temperature4'], 260.0, "Temperatures above 260C could damage your machine, be careful!")
-validators.warningAbove(settingsDictionary['filament_diameter'], 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
-validators.warningAbove(settingsDictionary['filament_diameter2'], 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
-validators.warningAbove(settingsDictionary['filament_diameter3'], 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
-validators.warningAbove(settingsDictionary['filament_diameter4'], 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
-validators.warningAbove(settingsDictionary['travel_speed'], 300.0, "It is highly unlikely that your machine can achieve a travel speed above 300mm/s")
-validators.warningAbove(settingsDictionary['bottom_thickness'], lambda : (float(getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
+validators.warningAbove(settingsDictionary['print_temperature'], 260.0, _("Temperatures above 260C could damage your machine, be careful!"))
+validators.warningAbove(settingsDictionary['print_temperature2'], 260.0, _("Temperatures above 260C could damage your machine, be careful!"))
+validators.warningAbove(settingsDictionary['print_temperature3'], 260.0, _("Temperatures above 260C could damage your machine, be careful!"))
+validators.warningAbove(settingsDictionary['print_temperature4'], 260.0, _("Temperatures above 260C could damage your machine, be careful!"))
+validators.warningAbove(settingsDictionary['filament_diameter'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
+validators.warningAbove(settingsDictionary['filament_diameter2'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
+validators.warningAbove(settingsDictionary['filament_diameter3'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
+validators.warningAbove(settingsDictionary['filament_diameter4'], 3.5, _("Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm."))
+validators.warningAbove(settingsDictionary['travel_speed'], 300.0, _("It is highly unlikely that your machine can achieve a travel speed above 300mm/s"))
+validators.warningAbove(settingsDictionary['bottom_thickness'], lambda : (float(getProfileSetting('nozzle_size')) * 3.0 / 4.0), _("A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended."))
#Conditions for multiple extruders
settingsDictionary['print_temperature2'].addCondition(lambda : int(getMachineSetting('extruder_amount')) > 1)
~ianmdlvl / cura.git / blobdiff