setting('solid_top', True, bool, 'expert', 'Infill').setLabel('Solid infill top', 'Create a solid top surface, if set to false the top is filled with the fill percentage. Useful for cups/vases.')
setting('solid_bottom', True, bool, 'expert', 'Infill').setLabel('Solid infill bottom', 'Create a solid bottom surface, if set to false the bottom is filled with the fill percentage. Useful for buildings.')
setting('fill_overlap', 15, int, 'expert', 'Infill').setRange(0,100).setLabel('Infill overlap (%)', 'Amount of overlap between the infill and the walls. There is a slight overlap with the walls and the infill so the walls connect firmly to the infill.')
-#setting('support_rate', 50, int, 'expert', 'Support').setRange(0,100).setLabel('Material amount (%)', 'Amount of material used for support, less material gives a weaker support structure which is easier to remove.')
+setting('support_rate', 75, int, 'expert', 'Support').setRange(0,100).setLabel('Material amount (%)', 'Amount of material used for support, less material gives a weaker support structure which is easier to remove.')
#setting('support_distance', 0.5, float, 'expert', 'Support').setRange(0).setLabel('Distance from object (mm)', 'Distance between the support structure and the object. Empty gap in which no support structure is printed.')
#setting('joris', False, bool, 'expert', 'Joris').setLabel('Spiralize the outer contour', '[Joris] is a code name for smoothing out the Z move of the outer edge. This will create a steady Z increase over the whole print. It is intended to be used with a single walled wall thickness to make cups/vases.')
#setting('bridge_speed', 100, int, 'expert', 'Bridge').setRange(0,100).setLabel('Bridge speed (%)', 'Speed at which layers with bridges are printed, compared to normal printing speed.')
~ianmdlvl / cura.git / blobdiff