setting('wall_thickness', 0.8, float, 'basic', _('Quality')).setRange(0.0).setLabel(_("Shell thickness (mm)"), _("Thickness of the outside shell in the horizontal direction.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines."))
setting('retraction_enable', False, bool, 'basic', _('Quality')).setLabel(_("Enable retraction"), _("Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab."))
setting('solid_layer_thickness', 0.6, float, 'basic', _('Fill')).setRange(0).setLabel(_("Bottom/Top thickness (mm)"), _("This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiple of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part."))
-setting('fill_density', 20, float, 'basic', _('Fill')).setRange(0, 100).setLabel(_("Fill Density (%)"), _("This controls how densely filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough.\nThis won't effect the outside of the print and only adjusts how strong the part becomes."))
+setting('fill_density', 20, float, 'basic', _('Fill')).setRange(0, 100).setLabel(_("Fill Density (%)"), _("This controls how densely filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough.\nThis won't affect the outside of the print and only adjusts how strong the part becomes."))
setting('nozzle_size', 0.4, float, 'advanced', _('Machine')).setRange(0.1,10).setLabel(_("Nozzle size (mm)"), _("The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings."))
setting('print_speed', 50, float, 'basic', _('Speed and Temperature')).setRange(1).setLabel(_("Print speed (mm/s)"), _("Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this."))
setting('print_temperature', 220, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("Printing temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA a value of 210C is usually used.\nFor ABS a value of 230C or higher is required."))
setting('cool_end.gcode', '', str, 'alteration', 'alteration')
setting('replace.csv', '', str, 'alteration', 'alteration')
#######################################################################################
-setting('nextobject.gcode', """;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
-G92 E0
-
-G91 ;relative positioning
-G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-G1 Z+0.5 E-5 F{travel_speed} ;move Z up a bit and retract filament even more
-G90 ;absolute positioning
-
-G1 Z{clear_z} F{max_z_speed}
-G92 E0
-G1 X{object_center_x} Y{object_center_y} F{travel_speed}
-G1 F200 E6
-G92 E0
-""", str, 'alteration', 'alteration')
-#######################################################################################
setting('switchExtruder.gcode', """;Switch between the current extruder and the next extruder, when printing with multiple extruders.
G92 E0
G1 E-36 F5000
setting('machine_width', '205', float, 'machine', 'hidden').setLabel(_("Maximum width (mm)"), _("Size of the machine in mm"))
setting('machine_depth', '205', float, 'machine', 'hidden').setLabel(_("Maximum depth (mm)"), _("Size of the machine in mm"))
setting('machine_height', '200', float, 'machine', 'hidden').setLabel(_("Maximum height (mm)"), _("Size of the machine in mm"))
-setting('machine_center_is_zero', 'False', bool, 'machine', 'hidden')
+setting('machine_center_is_zero', 'False', bool, 'machine', 'hidden').setLabel(_("Machine center 0,0"), _("Machines firmware defines the center of the bed as 0,0 instead of the front left corner."))
setting('ultimaker_extruder_upgrade', 'False', bool, 'machine', 'hidden')
setting('has_heated_bed', 'False', bool, 'machine', 'hidden').setLabel(_("Heated bed"), _("If you have an heated bed, this enabled heated bed settings (requires restart)"))
-setting('gcode_flavor', 'RepRap (Marlin/Sprinter)', ['RepRap (Marlin/Sprinter)', 'UltiGCode'], 'machine', 'hidden').setLabel(_("GCode Flavor"), _("Flavor of generated GCode.\nRepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\nUltiGCode is a variation of the RepRap GCode which puts more settings in the machine instead of the slicer."))
+setting('gcode_flavor', 'RepRap (Marlin/Sprinter)', ['RepRap (Marlin/Sprinter)', 'UltiGCode', 'MakerBot'], 'machine', 'hidden').setLabel(_("GCode Flavor"), _("Flavor of generated GCode.\nRepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\nUltiGCode is a variation of the RepRap GCode which puts more settings in the machine instead of the slicer.\nMakerBot GCode has a few changes in the way GCode is generated, but still requires MakerWare to generate to X3G."))
setting('extruder_amount', '1', ['1','2','3','4'], 'machine', 'hidden').setLabel(_("Extruder count"), _("Amount of extruders in your machine."))
setting('extruder_offset_x1', '-21.6', float, 'machine', 'hidden').setLabel(_("Offset X"), _("The offset of your secondary extruder compared to the primary."))
setting('extruder_offset_y1', '0.0', float, 'machine', 'hidden').setLabel(_("Offset Y"), _("The offset of your secondary extruder compared to the primary."))
setting('extruder_head_size_max_y', '0.0', float, 'machine', 'hidden').setLabel(_("Head size towards Y max (mm)"), _("The head size when printing multiple objects, measured from the tip of the nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan is on the left side."))
setting('extruder_head_size_height', '0.0', float, 'machine', 'hidden').setLabel(_("Printer gantry height (mm)"), _("The height of the gantry holding up the printer head. If an object is higher then this then you cannot print multiple objects one for one. 60mm for an Ultimaker."))
-validators.warningAbove(settingsDictionary['filament_flow'], 150, _("More flow then 150% is rare and usually not recommended."))
-validators.warningBelow(settingsDictionary['filament_flow'], 50, _("Less flow then 50% is rare and usually not recommended."))
+validators.warningAbove(settingsDictionary['filament_flow'], 150, _("More flow than 150% is rare and usually not recommended."))
+validators.warningBelow(settingsDictionary['filament_flow'], 50, _("Less flow than 50% is rare and usually not recommended."))
validators.warningAbove(settingsDictionary['layer_height'], lambda : (float(getProfileSetting('nozzle_size')) * 80.0 / 100.0), _("Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended."))
validators.wallThicknessValidator(settingsDictionary['wall_thickness'])
validators.warningAbove(settingsDictionary['print_speed'], 150.0, _("It is highly unlikely that your machine can achieve a printing speed above 150mm/s"))
setActiveMachine(int(getPreferenceFloat('active_machine')))
+def loadMachineSettings(filename):
+ global settingsList
+ #Read a configuration file as global config
+ profileParser = ConfigParser.ConfigParser()
+ try:
+ profileParser.read(filename)
+ except ConfigParser.ParsingError:
+ return
+
+ for set in settingsList:
+ if set.isMachineSetting():
+ if profileParser.has_option('machine', set.getName()):
+ set.setValue(unicode(profileParser.get('machine', set.getName()), 'utf-8', 'replace'))
+ checkAndUpdateMachineName()
+
def savePreferences(filename):
global settingsList
#Save the current profile to an ini file
return pre + '#F_WGHT#'
if tag == 'filament_cost':
return pre + '#F_COST#'
- if pre == 'F' and tag in ['print_speed', 'retraction_speed', 'travel_speed', 'max_z_speed', 'bottom_layer_speed', 'cool_min_feedrate']:
+ if pre == 'F' and tag == 'max_z_speed':
+ f = getProfileSettingFloat('travel_speed') * 60
+ if pre == 'F' and tag in ['print_speed', 'retraction_speed', 'travel_speed', 'bottom_layer_speed', 'cool_min_feedrate']:
f = getProfileSettingFloat(tag) * 60
elif isProfileSetting(tag):
f = getProfileSettingFloat(tag)
~ianmdlvl / cura.git / blobdiff