Merge pull request #601 from CapnBry/reloadscene

[cura.git] / Cura / gui / simpleMode.py

diff --git a/Cura/gui/simpleMode.py b/Cura/gui/simpleMode.py
index d985008c959132b4f776c8569651819a6bf4e50e..94d9dadfb880f551bfa4438d953e483e5e071d45 100644 (file)
--- a/Cura/gui/simpleMode.py
+++ b/Cura/gui/simpleMode.py
@@ -1,4 +1,3 @@
-from __future__ import absolute_import
 __copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
 
 import wx
@@ -77,47 +76,17 @@ class simpleModePanel(wx.Panel):
        def setupSlice(self):
                put = profile.setTempOverride
                get = profile.getProfileSetting
-
-               put('layer_height', '0.2')
-               put('wall_thickness', '0.8')
-               put('solid_layer_thickness', '0.6')
-               put('fill_density', '20')
-               put('skirt_line_count', '1')
-               put('skirt_gap', '6.0')
-               put('print_speed', '50')
-               put('print_temperature', '220')
-               put('support', 'None')
-               put('retraction_enable', 'True')
-               put('retraction_min_travel', '5.0')
-               put('retraction_speed', '40.0')
-               put('retraction_amount', '4.5')
-               put('retraction_extra', '0.0')
-               put('travel_speed', '150')
-               put('bottom_layer_speed', '25')
-               put('cool_min_layer_time', '5')
-               put('fan_enabled', 'True')
-               put('fan_speed', '100')
-               put('extra_base_wall_thickness', '0.0')
-               put('sequence', 'Loops > Perimeter > Infill')
-               put('force_first_layer_sequence', 'True')
-               put('infill_type', 'Line')
-               put('solid_top', 'True')
-               put('fill_overlap', '15')
-               put('support_rate', '80')
-               put('support_distance', '0.5')
-               put('joris', 'False')
-               put('cool_min_feedrate', '5')
-               put('bridge_speed', '100')
-               put('raft_margin', '5')
-               put('raft_base_material_amount', '100')
-               put('raft_interface_material_amount', '100')
-               put('bottom_thickness', '0.3')
+               for setting in profile.settingsList:
+                       if not setting.isProfile():
+                               continue
+                       profile.setTempOverride(setting.getName(), setting.getDefault())
 
                if self.printSupport.GetValue():
                        put('support', _("Exterior Only"))
 
                nozzle_size = float(get('nozzle_size'))
                if self.printTypeNormal.GetValue():
+                       put('layer_height', '0.2')
                        put('wall_thickness', nozzle_size * 2.0)
                        put('layer_height', '0.10')
                        put('fill_density', '20')
@@ -125,7 +94,7 @@ class simpleModePanel(wx.Panel):
                        put('wall_thickness', nozzle_size * 2.5)
                        put('layer_height', '0.20')
                        put('fill_density', '10')
-                       put('print_speed', '50')
+                       put('print_speed', '60')
                        put('cool_min_layer_time', '3')
                        put('bottom_layer_speed', '30')
                elif self.printTypeHigh.GetValue():
@@ -135,27 +104,14 @@ class simpleModePanel(wx.Panel):
                        put('bottom_layer_speed', '15')
                elif self.printTypeJoris.GetValue():
                        put('wall_thickness', nozzle_size * 1.5)
-                       put('layer_height', '0.3')
-                       put('solid_layer_thickness', '0.9')
-                       put('fill_density', '0')
-                       put('joris', 'True')
-                       put('extra_base_wall_thickness', '15.0')
-                       put('sequence', 'Infill > Loops > Perimeter')
-                       put('force_first_layer_sequence', 'False')
-                       put('solid_top', 'False')
-                       put('support', 'None')
-                       put('cool_min_layer_time', '3')
 
                put('filament_diameter', self.printMaterialDiameter.GetValue())
                if self.printMaterialPLA.GetValue():
-                       put('filament_density', '1.00')
-                       put('enable_raft', 'False')
-                       put('skirt_line_count', '1')
+                       pass
                if self.printMaterialABS.GetValue():
-                       put('filament_density', '0.85')
-                       put('enable_raft', 'True')
-                       put('skirt_line_count', '0')
-                       put('bottom_thickness', '0.0')
+                       put('print_bed_temperature', '100')
+                       put('platform_adhesion', 'Brim')
+                       put('filament_flow', '107')
                        put('print_temperature', '245')
                put('plugin_config', '')