from __future__ import absolute_import
__copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
+import os
import webbrowser
import threading
import time
from Cura.util import machineCom
from Cura.util import profile
from Cura.util import gcodeGenerator
-from Cura.util.resources import getPathForImage
+from Cura.util import resources
class InfoBox(wx.Panel):
self.sizer = wx.GridBagSizer(5, 5)
self.SetSizer(self.sizer)
- self.attentionBitmap = wx.Bitmap(getPathForImage('attention.png'))
- self.errorBitmap = wx.Bitmap(getPathForImage('error.png'))
- self.readyBitmap = wx.Bitmap(getPathForImage('ready.png'))
+ self.attentionBitmap = wx.Bitmap(resources.getPathForImage('attention.png'))
+ self.errorBitmap = wx.Bitmap(resources.getPathForImage('error.png'))
+ self.readyBitmap = wx.Bitmap(resources.getPathForImage('ready.png'))
self.busyBitmap = [
- wx.Bitmap(getPathForImage('busy-0.png')),
- wx.Bitmap(getPathForImage('busy-1.png')),
- wx.Bitmap(getPathForImage('busy-2.png')),
- wx.Bitmap(getPathForImage('busy-3.png'))
+ wx.Bitmap(resources.getPathForImage('busy-0.png')),
+ wx.Bitmap(resources.getPathForImage('busy-1.png')),
+ wx.Bitmap(resources.getPathForImage('busy-2.png')),
+ wx.Bitmap(resources.getPathForImage('busy-3.png'))
]
self.bitmap = wx.StaticBitmap(self, -1, wx.EmptyBitmapRGBA(24, 24, red=255, green=255, blue=255, alpha=1))
super(FirstInfoPage, self).__init__(parent, _("First time run wizard"))
self.AddText(_("Welcome, and thanks for trying Cura!"))
self.AddSeperator()
- self.AddText(_("This wizard will help you with the following steps:"))
- self.AddText(_("* Configure Cura for your machine"))
- self.AddText(_("* Optionally upgrade your firmware"))
- self.AddText(_("* Optionally check if your machine is working safely"))
- self.AddText(_("* Optionally level your printer bed"))
+ self.AddText(_("This wizard will help you in setting up Cura for your machine."))
+ # self.AddText(_("This wizard will help you with the following steps:"))
+ # self.AddText(_("* Configure Cura for your machine"))
+ # self.AddText(_("* Optionally upgrade your firmware"))
+ # self.AddText(_("* Optionally check if your machine is working safely"))
+ # self.AddText(_("* Optionally level your printer bed"))
#self.AddText('* Calibrate your machine')
#self.AddText('* Do your first print')
-class RepRapInfoPage(InfoPage):
+class OtherMachineSelectPage(InfoPage):
def __init__(self, parent):
- super(RepRapInfoPage, self).__init__(parent, "RepRap information")
- self.AddText(
- _("RepRap machines are vastly different, and there is no\ndefault configuration in Cura for any of them."))
+ super(OtherMachineSelectPage, self).__init__(parent, "Other machine information")
+ self.AddText(_("The following pre-defined machine profiles are available"))
+ self.AddText(_("Note that these profiles are not guaranteed to give good results,\nor work at all. Extra tweaks might be required.\nIf you find issues with the predefined profiles,\nor want an extra profile.\nPlease report it at the github issue tracker."))
+ self.options = []
+ machines = resources.getDefaultMachineProfiles()
+ machines.sort()
+ for filename in machines:
+ name = os.path.splitext(os.path.basename(filename))[0]
+ item = self.AddRadioButton(name)
+ item.filename = filename
+ item.Bind(wx.EVT_RADIOBUTTON, self.OnProfileSelect)
+ self.options.append(item)
+ self.AddSeperator()
+ item = self.AddRadioButton('Custom...')
+ item.SetValue(True)
+ item.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
+
+ def OnProfileSelect(self, e):
+ wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineInfoPage)
+
+ def OnOtherSelect(self, e):
+ wx.wizard.WizardPageSimple.Chain(self, self.GetParent().customRepRapInfoPage)
+
+ def StoreData(self):
+ for option in self.options:
+ if option.GetValue():
+ profile.loadProfile(option.filename)
+ profile.loadMachineSettings(option.filename)
+
+class OtherMachineInfoPage(InfoPage):
+ def __init__(self, parent):
+ super(OtherMachineInfoPage, self).__init__(parent, "Cura Ready!")
+ self.AddText(_("Cura is now ready to be used!"))
+
+class CustomRepRapInfoPage(InfoPage):
+ def __init__(self, parent):
+ super(CustomRepRapInfoPage, self).__init__(parent, "Custom RepRap information")
+ self.AddText(_("RepRap machines can be vastly different, so here you can set your own settings."))
+ self.AddText(_("Be sure to review the default profile before running it on your machine."))
self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
self.AddSeperator()
self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
self.machineName = self.AddLabelTextCtrl(_("Machine name"), "RepRap")
self.machineWidth = self.AddLabelTextCtrl(_("Machine width (mm)"), "80")
self.machineDepth = self.AddLabelTextCtrl(_("Machine depth (mm)"), "80")
- self.machineHeight = self.AddLabelTextCtrl(_("Machine height (mm)"), "60")
+ self.machineHeight = self.AddLabelTextCtrl(_("Machine height (mm)"), "55")
self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
self.heatedBed = self.AddCheckbox(_("Heated bed"))
self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
self.Ultimaker2Radio = self.AddRadioButton("Ultimaker2", style=wx.RB_GROUP)
self.Ultimaker2Radio.SetValue(True)
self.Ultimaker2Radio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
- self.UltimakerRadio = self.AddRadioButton("Ultimaker")
+ self.UltimakerRadio = self.AddRadioButton("Ultimaker Original")
self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
- self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap)"))
+ self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap, MakerBot)"))
self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
self.AddSeperator()
self.AddText(_("The collection of anonymous usage information helps with the continued improvement of Cura."))
wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerSelectParts)
def OnOtherSelect(self, e):
- wx.wizard.WizardPageSimple.Chain(self, self.GetParent().repRapInfoPage)
+ wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
def AllowNext(self):
wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimaker2ReadyPage)
return True
def StoreData(self):
+ profile.putProfileSetting('retraction_enable', 'True')
if self.Ultimaker2Radio.GetValue():
profile.putMachineSetting('machine_width', '230')
profile.putMachineSetting('machine_depth', '225')
profile.putMachineSetting('machine_height', '205')
+ profile.putMachineSetting('machine_name', 'ultimaker2')
profile.putMachineSetting('machine_type', 'ultimaker2')
profile.putMachineSetting('machine_center_is_zero', 'False')
+ profile.putMachineSetting('has_heated_bed', 'True')
profile.putMachineSetting('gcode_flavor', 'UltiGCode')
+ profile.putMachineSetting('extruder_head_size_min_x', '40.0')
+ profile.putMachineSetting('extruder_head_size_min_y', '10.0')
+ profile.putMachineSetting('extruder_head_size_max_x', '60.0')
+ profile.putMachineSetting('extruder_head_size_max_y', '30.0')
+ profile.putMachineSetting('extruder_head_size_height', '55.0')
profile.putProfileSetting('nozzle_size', '0.4')
- profile.putMachineSetting('extruder_head_size_min_x', '75.0')
- profile.putMachineSetting('extruder_head_size_min_y', '18.0')
- profile.putMachineSetting('extruder_head_size_max_x', '18.0')
- profile.putMachineSetting('extruder_head_size_max_y', '35.0')
- profile.putMachineSetting('extruder_head_size_height', '60.0')
+ profile.putProfileSetting('fan_full_height', '5.0')
+ profile.putMachineSetting('extruder_offset_x1', '18.0')
+ profile.putMachineSetting('extruder_offset_y1', '0.0')
elif self.UltimakerRadio.GetValue():
profile.putMachineSetting('machine_width', '205')
profile.putMachineSetting('machine_depth', '205')
profile.putMachineSetting('machine_height', '200')
+ profile.putMachineSetting('machine_name', 'ultimaker original')
profile.putMachineSetting('machine_type', 'ultimaker')
profile.putMachineSetting('machine_center_is_zero', 'False')
profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
profile.putMachineSetting('extruder_head_size_min_y', '18.0')
profile.putMachineSetting('extruder_head_size_max_x', '18.0')
profile.putMachineSetting('extruder_head_size_max_y', '35.0')
- profile.putMachineSetting('extruder_head_size_height', '60.0')
+ profile.putMachineSetting('extruder_head_size_height', '55.0')
else:
profile.putMachineSetting('machine_width', '80')
profile.putMachineSetting('machine_depth', '80')
profile.putMachineSetting('machine_height', '60')
+ profile.putMachineSetting('machine_name', 'reprap')
profile.putMachineSetting('machine_type', 'reprap')
profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
profile.putPreference('startMode', 'Normal')
skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
self.AddHiddenSeperator()
self.AddText(_("Do not upgrade to this firmware if:"))
- self.AddText(_("* You have an older machine based on ATMega1280"))
+ self.AddText(_("* You have an older machine based on ATMega1280 (Rev 1 machine)"))
self.AddText(_("* Have other changes in the firmware"))
# button = self.AddButton('Goto this page for a custom firmware')
# button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
def __init__(self, parent):
super(UltimakerCheckupPage, self).__init__(parent, "Ultimaker Checkup")
- self.checkBitmap = wx.Bitmap(getPathForImage('checkmark.png'))
- self.crossBitmap = wx.Bitmap(getPathForImage('cross.png'))
- self.unknownBitmap = wx.Bitmap(getPathForImage('question.png'))
- self.endStopNoneBitmap = wx.Bitmap(getPathForImage('endstop_none.png'))
- self.endStopXMinBitmap = wx.Bitmap(getPathForImage('endstop_xmin.png'))
- self.endStopXMaxBitmap = wx.Bitmap(getPathForImage('endstop_xmax.png'))
- self.endStopYMinBitmap = wx.Bitmap(getPathForImage('endstop_ymin.png'))
- self.endStopYMaxBitmap = wx.Bitmap(getPathForImage('endstop_ymax.png'))
- self.endStopZMinBitmap = wx.Bitmap(getPathForImage('endstop_zmin.png'))
- self.endStopZMaxBitmap = wx.Bitmap(getPathForImage('endstop_zmax.png'))
+ self.checkBitmap = wx.Bitmap(resources.getPathForImage('checkmark.png'))
+ self.crossBitmap = wx.Bitmap(resources.getPathForImage('cross.png'))
+ self.unknownBitmap = wx.Bitmap(resources.getPathForImage('question.png'))
+ self.endStopNoneBitmap = wx.Bitmap(resources.getPathForImage('endstop_none.png'))
+ self.endStopXMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmin.png'))
+ self.endStopXMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmax.png'))
+ self.endStopYMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymin.png'))
+ self.endStopYMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymax.png'))
+ self.endStopZMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmin.png'))
+ self.endStopZMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmax.png'))
self.AddText(
_("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
self.lengthInput.SetValue("100")
def OnExtrudeClick(self, e):
- threading.Thread(target=self.OnExtrudeRun).start()
+ t = threading.Thread(target=self.OnExtrudeRun)
+ t.daemon = True
+ t.start()
def OnExtrudeRun(self):
self.heatButton.Enable(False)
self.heatButton.Enable()
def OnHeatClick(self, e):
- threading.Thread(target=self.OnHeatRun).start()
+ t = threading.Thread(target=self.OnHeatRun)
+ t.daemon = True
+ t.start()
def OnHeatRun(self):
self.heatButton.Enable(False)
self.ultimakerCalibrateStepsPerEPage = UltimakerCalibrateStepsPerEPage(self)
self.bedLevelPage = bedLevelWizardMain(self)
self.headOffsetCalibration = headOffsetCalibrationPage(self)
- self.repRapInfoPage = RepRapInfoPage(self)
+ self.otherMachineSelectPage = OtherMachineSelectPage(self)
+ self.customRepRapInfoPage = CustomRepRapInfoPage(self)
+ self.otherMachineInfoPage = OtherMachineInfoPage(self)
self.ultimaker2ReadyPage = Ultimaker2ReadyPage(self)
wx.wizard.WizardPageSimple.Chain(self.ultimakerFirmwareUpgradePage, self.ultimakerCheckupPage)
wx.wizard.WizardPageSimple.Chain(self.ultimakerCheckupPage, self.bedLevelPage)
#wx.wizard.WizardPageSimple.Chain(self.ultimakerCalibrationPage, self.ultimakerCalibrateStepsPerEPage)
+ wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
self.FitToPage(self.firstInfoPage)
self.GetPageAreaSizer().Add(self.firstInfoPage)