self.rowNr += 1
def AddHiddenSeperator(self):
- self.AddText('')
+ self.AddText("")
def AddInfoBox(self):
infoBox = InfoBox(self)
class FirstInfoPage(InfoPage):
def __init__(self, parent):
- super(FirstInfoPage, self).__init__(parent, "First time run wizard")
- self.AddText('Welcome, and thanks for trying Cura!')
+ super(FirstInfoPage, self).__init__(parent, _("First time run wizard"))
+ self.AddText(_("Welcome, and thanks for trying Cura!"))
self.AddSeperator()
- self.AddText('This wizard will help you with the following steps:')
- self.AddText('* Configure Cura for your machine')
- self.AddText('* Upgrade your firmware')
- self.AddText('* Check if your machine is working safely')
- self.AddText('* Level your printer bed')
+ self.AddText(_("This wizard will help you with the following steps:"))
+ self.AddText(_("* Configure Cura for your machine"))
+ self.AddText(_("* Upgrade your firmware"))
+ self.AddText(_("* Check if your machine is working safely"))
+ self.AddText(_("* Level your printer bed"))
#self.AddText('* Calibrate your machine')
#self.AddText('* Do your first print')
def __init__(self, parent):
super(RepRapInfoPage, self).__init__(parent, "RepRap information")
self.AddText(
- 'RepRap machines are vastly different, and there is no\ndefault configuration in Cura for any of them.')
- self.AddText('If you like a default profile for your machine added,\nthen make an issue on github.')
+ _("RepRap machines are vastly different, and there is no\ndefault configuration in Cura for any of them."))
+ self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
self.AddSeperator()
- self.AddText('You will have to manually install Marlin or Sprinter firmware.')
+ self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
self.AddSeperator()
- self.machineWidth = self.AddLabelTextCtrl('Machine width (mm)', '80')
- self.machineDepth = self.AddLabelTextCtrl('Machine depth (mm)', '80')
- self.machineHeight = self.AddLabelTextCtrl('Machine height (mm)', '60')
- self.nozzleSize = self.AddLabelTextCtrl('Nozzle size (mm)', '0.5')
- self.heatedBed = self.AddCheckbox('Heated bed')
- self.HomeAtCenter = self.AddCheckbox('Bed center is 0,0,0 (RoStock)')
+ self.machineWidth = self.AddLabelTextCtrl(_("Machine width (mm)"), "80")
+ self.machineDepth = self.AddLabelTextCtrl(_("Machine depth (mm)"), "80")
+ self.machineHeight = self.AddLabelTextCtrl(_("Machine height (mm)"), "60")
+ self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
+ self.heatedBed = self.AddCheckbox(_("Heated bed"))
+ self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
def StoreData(self):
profile.putPreference('machine_width', self.machineWidth.GetValue())
class MachineSelectPage(InfoPage):
def __init__(self, parent):
- super(MachineSelectPage, self).__init__(parent, "Select your machine")
- self.AddText('What kind of machine do you have:')
+ super(MachineSelectPage, self).__init__(parent, _("Select your machine"))
+ self.AddText(_("What kind of machine do you have:"))
self.UltimakerRadio = self.AddRadioButton("Ultimaker", style=wx.RB_GROUP)
self.UltimakerRadio.SetValue(True)
self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
- self.OtherRadio = self.AddRadioButton("Other (Ex: RepRap)")
+ self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap)"))
self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
self.AddSeperator()
- self.AddText('The collection of anonymous usage information helps with the continued improvement of Cura.')
- self.AddText('This does NOT submit your models online nor gathers any privacy related information.')
- self.SubmitUserStats = self.AddCheckbox('Submit anonymous usage information:')
- self.AddText('For full details see: http://wiki.ultimaker.com/Cura:stats')
+ self.AddText(_("The collection of anonymous usage information helps with the continued improvement of Cura."))
+ self.AddText(_("This does NOT submit your models online nor gathers any privacy related information."))
+ self.SubmitUserStats = self.AddCheckbox(_("Submit anonymous usage information:"))
+ self.AddText(_("For full details see: http://wiki.ultimaker.com/Cura:stats"))
self.SubmitUserStats.SetValue(True)
def OnUltimakerSelect(self, e):
class SelectParts(InfoPage):
def __init__(self, parent):
- super(SelectParts, self).__init__(parent, "Select upgraded parts you have")
- self.AddText('To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine.')
+ super(SelectParts, self).__init__(parent, _("Select upgraded parts you have"))
+ self.AddText(_("To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine."))
self.AddSeperator()
- self.springExtruder = self.AddCheckbox('Extruder drive upgrade')
- self.heatedBed = self.AddCheckbox('Heated printer bed (self built)')
- self.dualExtrusion = self.AddCheckbox('Dual extrusion (experimental)')
+ self.springExtruder = self.AddCheckbox(_("Extruder drive upgrade"))
+ self.heatedBed = self.AddCheckbox(_("Heated printer bed (self built)"))
+ self.dualExtrusion = self.AddCheckbox(_("Dual extrusion (experimental)"))
self.AddSeperator()
- self.AddText('If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability.')
- self.AddText('This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094')
+ self.AddText(_("If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability."))
+ self.AddText(_("This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094"))
self.springExtruder.SetValue(True)
def StoreData(self):
class FirmwareUpgradePage(InfoPage):
def __init__(self, parent):
super(FirmwareUpgradePage, self).__init__(parent, "Upgrade Ultimaker Firmware")
- self.AddText('Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the step motors, regulates the temperature\nand ultimately makes your printer work.')
+ self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the step motors, regulates the temperature\nand ultimately makes your printer work."))
self.AddHiddenSeperator()
- self.AddText('The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier.')
+ self.AddText(_("The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier."))
self.AddHiddenSeperator()
- self.AddText('Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now.')
+ self.AddText(_("Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now."))
upgradeButton, skipUpgradeButton = self.AddDualButton('Upgrade to Marlin firmware', 'Skip upgrade')
upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
self.AddHiddenSeperator()
- self.AddText('Do not upgrade to this firmware if:')
- self.AddText('* You have an older machine based on ATMega1280')
- self.AddText('* Have other changes in the firmware')
+ self.AddText(_("Do not upgrade to this firmware if:"))
+ self.AddText(_("* You have an older machine based on ATMega1280"))
+ self.AddText(_("* Have other changes in the firmware"))
# button = self.AddButton('Goto this page for a custom firmware')
# button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
self.endStopZMaxBitmap = wx.Bitmap(getPathForImage('endstop_zmax.png'))
self.AddText(
- 'It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional.')
- b1, b2 = self.AddDualButton('Run checks', 'Skip checks')
+ _("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
+ b1, b2 = self.AddDualButton(_("Run checks"), _("Skip checks"))
b1.Bind(wx.EVT_BUTTON, self.OnCheckClick)
b2.Bind(wx.EVT_BUTTON, self.OnSkipClick)
self.AddSeperator()
- self.commState = self.AddCheckmark('Communication:', self.unknownBitmap)
- self.tempState = self.AddCheckmark('Temperature:', self.unknownBitmap)
- self.stopState = self.AddCheckmark('Endstops:', self.unknownBitmap)
+ self.commState = self.AddCheckmark(_("Communication:"), self.unknownBitmap)
+ self.tempState = self.AddCheckmark(_("Temperature:"), self.unknownBitmap)
+ self.stopState = self.AddCheckmark(_("Endstops:"), self.unknownBitmap)
self.AddSeperator()
self.infoBox = self.AddInfoBox()
- self.machineState = self.AddText('')
- self.temperatureLabel = self.AddText('')
- self.errorLogButton = self.AddButton('Show error log')
+ self.machineState = self.AddText("")
+ self.temperatureLabel = self.AddText("")
+ self.errorLogButton = self.AddButton(_("Show error log"))
self.errorLogButton.Show(False)
self.AddSeperator()
self.endstopBitmap = self.AddBitmap(self.endStopNoneBitmap)
self.comm = None
wx.CallAfter(self.OnCheckClick)
return
- self.infoBox.SetBusy('Connecting to machine.')
+ self.infoBox.SetBusy(_("Connecting to machine."))
self.commState.SetBitmap(self.unknownBitmap)
self.tempState.SetBitmap(self.unknownBitmap)
self.stopState.SetBitmap(self.unknownBitmap)
self.tempCheckTimeout = 20
if temp[self.checkExtruderNr] > 70:
self.checkupState = 1
- wx.CallAfter(self.infoBox.SetInfo, 'Cooldown before temperature check.')
- self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
+ wx.CallAfter(self.infoBox.SetInfo, _("Cooldown before temperature check."))
+ self.comm.sendCommand("M104 S0 T%d" % (self.checkExtruderNr))
self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
else:
self.startTemp = temp[self.checkExtruderNr]
self.checkupState = 2
- wx.CallAfter(self.infoBox.SetInfo, 'Checking the heater and temperature sensor.')
+ wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
elif self.checkupState == 1:
if temp < 60:
self.startTemp = temp[self.checkExtruderNr]
self.checkupState = 2
- wx.CallAfter(self.infoBox.SetInfo, 'Checking the heater and temperature sensor.')
+ wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
elif self.checkupState == 2:
if self.checkExtruderNr < int(profile.getPreference('extruder_amount')):
self.checkExtruderNr = 0
self.checkupState = 3
- wx.CallAfter(self.infoBox.SetAttention, 'Please make sure none of the endstops are pressed.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please make sure none of the endstops are pressed."))
wx.CallAfter(self.endstopBitmap.Show, True)
wx.CallAfter(self.Layout)
self.comm.sendCommand('M119')
if self.tempCheckTimeout < 1:
self.checkupState = -1
wx.CallAfter(self.tempState.SetBitmap, self.crossBitmap)
- wx.CallAfter(self.infoBox.SetError, 'Temperature measurement FAILED!', 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
+ wx.CallAfter(self.infoBox.SetError, _("Temperature measurement FAILED!"), 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
elif self.checkupState >= 3 and self.checkupState < 10:
self.comm.sendCommand('M119')
- wx.CallAfter(self.temperatureLabel.SetLabel, 'Head temperature: %d' % (temp[self.checkExtruderNr]))
+ wx.CallAfter(self.temperatureLabel.SetLabel, _("Head temperature: %d") % (temp[self.checkExtruderNr]))
def mcStateChange(self, state):
if self.comm is None:
return
if self.comm.isOperational():
wx.CallAfter(self.commState.SetBitmap, self.checkBitmap)
- wx.CallAfter(self.machineState.SetLabel, 'Communication State: %s' % (self.comm.getStateString()))
+ wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
elif self.comm.isError():
wx.CallAfter(self.commState.SetBitmap, self.crossBitmap)
- wx.CallAfter(self.infoBox.SetError, 'Failed to establish connection with the printer.', 'http://wiki.ultimaker.com/Cura:_Connection_problems')
+ wx.CallAfter(self.infoBox.SetError, _("Failed to establish connection with the printer."), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
wx.CallAfter(self.endstopBitmap.Show, False)
wx.CallAfter(self.machineState.SetLabel, '%s' % (self.comm.getErrorString()))
wx.CallAfter(self.errorLogButton.Show, True)
wx.CallAfter(self.Layout)
else:
- wx.CallAfter(self.machineState.SetLabel, 'Communication State: %s' % (self.comm.getStateString()))
+ wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
def mcMessage(self, message):
if self.checkupState >= 3 and self.checkupState < 10 and ('_min' in message or '_max' in message):
if self.checkupState == 3:
if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
self.checkupState = 4
- wx.CallAfter(self.infoBox.SetAttention, 'Please press the right X endstop.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please press the right X endstop."))
wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMaxBitmap)
elif self.checkupState == 4:
if not self.xMinStop and self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
self.checkupState = 5
- wx.CallAfter(self.infoBox.SetAttention, 'Please press the left X endstop.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
elif self.checkupState == 5:
if self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
self.checkupState = 6
- wx.CallAfter(self.infoBox.SetAttention, 'Please press the front Y endstop.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please press the front Y endstop."))
wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMinBitmap)
elif self.checkupState == 6:
if not self.xMinStop and not self.xMaxStop and self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
self.checkupState = 7
- wx.CallAfter(self.infoBox.SetAttention, 'Please press the back Y endstop.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please press the back Y endstop."))
wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMaxBitmap)
elif self.checkupState == 7:
if not self.xMinStop and not self.xMaxStop and not self.yMinStop and self.yMaxStop and not self.zMinStop and not self.zMaxStop:
self.checkupState = 8
- wx.CallAfter(self.infoBox.SetAttention, 'Please press the top Z endstop.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
elif self.checkupState == 8:
if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and self.zMinStop and not self.zMaxStop:
self.checkupState = 9
- wx.CallAfter(self.infoBox.SetAttention, 'Please press the bottom Z endstop.')
+ wx.CallAfter(self.infoBox.SetAttention, _("Please press the bottom Z endstop."))
wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMaxBitmap)
elif self.checkupState == 9:
if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and self.zMaxStop:
self.checkupState = 10
self.comm.close()
- wx.CallAfter(self.infoBox.SetInfo, 'Checkup finished')
+ wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
wx.CallAfter(self.infoBox.SetReadyIndicator)
wx.CallAfter(self.endstopBitmap.Show, False)
wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
#if profile.getPreference('steps_per_e') == '0':
# profile.putPreference('steps_per_e', '865.888')
- self.AddText("Calibrating the Steps Per E requires some manual actions.")
- self.AddText("First remove any filament from your machine.")
- self.AddText("Next put in your filament so the tip is aligned with the\ntop of the extruder drive.")
- self.AddText("We'll push the filament 100mm")
- self.extrudeButton = self.AddButton("Extrude 100mm filament")
- self.AddText("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)")
- self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton('100', 'Save')
- self.AddText("This results in the following steps per E:")
+ self.AddText(_("Calibrating the Steps Per E requires some manual actions."))
+ self.AddText(_("First remove any filament from your machine."))
+ self.AddText(_("Next put in your filament so the tip is aligned with the\ntop of the extruder drive."))
+ self.AddText(_("We'll push the filament 100mm"))
+ self.extrudeButton = self.AddButton(_("Extrude 100mm filament"))
+ self.AddText(_("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)"))
+ self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton("100", _("Save"))
+ self.AddText(_("This results in the following steps per E:"))
self.stepsPerEInput = self.AddTextCtrl(profile.getPreference('steps_per_e'))
- self.AddText("You can repeat these steps to get better calibration.")
+ self.AddText(_("You can repeat these steps to get better calibration."))
self.AddSeperator()
self.AddText(
- "If you still have filament in your printer which needs\nheat to remove, press the heat up button below:")
- self.heatButton = self.AddButton("Heatup for filament removal")
+ _("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:"))
+ self.heatButton = self.AddButton(_("Heatup for filament removal"))
self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
self.comm = machineCom.MachineCom()
if not self.comm.isOpen():
wx.MessageBox(
- "Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable",
+ _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
'Printer error', wx.OK | wx.ICON_INFORMATION)
self.heatButton.Enable(True)
self.extrudeButton.Enable(True)
self.comm = machineCom.MachineCom()
if not self.comm.isOpen():
wx.MessageBox(
- "Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable",
+ _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
'Printer error', wx.OK | wx.ICON_INFORMATION)
self.heatButton.Enable(True)
self.extrudeButton.Enable(True)
~ianmdlvl / cura.git / blobdiff