+// ===== TAZ-5 feed tube adjustment kit =====
+//
+// With a TAZ-5 I recommend using this kit to improve the feed
+// reliability:
+//
+// Set
+// fdia=2.85
+// And print following parts
+// FilamentGuideSpacer (ideally, at `high detail')
+// FilamentGuideArmPrint (optional; `high detail' or `standard')
+//
+// And possibly also
+// t-nut_jig_0.2.stl
+// from Aleph Objects - look here:
+// http://download.lulzbot.com/TAZ/accessories/tool_heads/version_2/Dual_Extruder_v2/production_parts/stl/
+//
+// The spacer clips onto the filament guide tube holder arm, on the
+// inside, with the pointy flanged end towards the filament guide
+// tube. It stops the filament guide tube angle (and so the
+// filament's natural pickup location) changing as the print head moves.
+//
+// The FilamentGuideArm[Print] is a replacement for the arm supplied
+// with your TAZ-5. It's longer, so that the filament pickup point is
+// closer to the middle of the coil. Use the t-nut_jig to stop the
+// T-nuts in the aluminium channel from annoyingly sliding down to the
+// bottom while you swap out the arm.
+//
+// (Faberdashery coils, and therefore both the above spools, have a
+// larger diameter than the flat-walled spools often supplied by other
+// vendors. And the spools above have individual arms rather than a
+// continuous disc. If the filament `unhooks' from the arm, it can
+// pull taught around the hub and stop feeding properly.)
+//
+// ===== Spool storage arm, for mounting on walls =====
+//
+// A storage arm suitable for screwing to walls, bookshelves,
+// etc. (requires non-countersunk M4 screws); will hold two heavy duty
+// spools each with a 100m coil.