chiark
/
gitweb
/
~ianmdlvl
/
reprap-play.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
fairphone-case: adjust camera again (from v6 with no bumpers)
[reprap-play.git]
/
fairphone-case.scad
diff --git
a/fairphone-case.scad
b/fairphone-case.scad
index 254abcf88cce30849c424cc024fce32a46b6dd80..5537a65b4d436655937dc0c902e34bd509e217da 100644
(file)
--- a/
fairphone-case.scad
+++ b/
fairphone-case.scad
@@
-2,8
+2,8
@@
phone = [ 145.0, 75.0 ];
phone = [ 145.0, 75.0 ];
-bumper
s = [ 1.5, 1.75
];
-// ^
both sides together
.
+bumper
= [ 0.250, 0.250
];
+// ^
One side. Overall size is increased by twice this
.
// If no bumpers, is the gap around the phone.
phone_cnr_rad = 6.0;
// If no bumpers, is the gap around the phone.
phone_cnr_rad = 6.0;
@@
-15,8
+15,8
@@
phone_total_thick = 12.0;
phone_backside_slope_inner = 1.5; // larger means shallower
phone_backside_slope_outer = 1.0; // larger means shallower
phone_backside_slope_inner = 1.5; // larger means shallower
phone_backside_slope_outer = 1.0; // larger means shallower
-camera_pos_tl = [
7.0, 13.
0 ]; // measured from tl corner
-camera_pos_br = [ 22.
85,37.85
]; // tl/br as seen from back
+camera_pos_tl = [
6.450, 12.75
0 ]; // measured from tl corner
+camera_pos_br = [ 22.
300, 37.600
]; // tl/br as seen from back
case_th_bottom = 2.5;
case_th_lid = 2.5;
case_th_bottom = 2.5;
case_th_lid = 2.5;
@@
-54,8
+54,11
@@
strut_min_at_end = 1.5;
// ---------- calculated ----------
// ---------- calculated ----------
-phone_height = (phone + bumpers)[0];
-phone_width = (phone + bumpers)[1];
+phone_height = (phone + bumper*2)[0];
+phone_width = (phone + bumper*2)[1];
+
+echo(camera_pos_tl + bumper,
+ camera_pos_br + bumper);
// ----- could be changed -----
lid_buttoncover_gap = lid_gap_x;
// ----- could be changed -----
lid_buttoncover_gap = lid_gap_x;
@@
-89,8
+92,6
@@
lp_r12 = case_th_lid - (lpp11[1] - lpp10[1]);
lpp12 = [ epp4[0] + lp_r12, lpp11[1] ];
lpp13 = [ lpp12[0], lpp12[1] + lp_r12 ];
lpp12 = [ epp4[0] + lp_r12, lpp11[1] ];
lpp13 = [ lpp12[0], lpp12[1] + lp_r12 ];
-echo(lpp13 - lpp10);
-
// button profile
bppM = epp4 + [0,5];
bppN = [ 0.5 * (epp0[0] + epp4[0]), bppM[1] ];
// button profile
bppM = epp4 + [0,5];
bppN = [ 0.5 * (epp0[0] + epp4[0]), bppM[1] ];
@@
-327,6
+328,7
@@
module Case(){ ////toplevel
mirror([0, 0, 1])
linear_extrude(height = 20)
mirror([0, 1, 0])
mirror([0, 0, 1])
linear_extrude(height = 20)
mirror([0, 1, 0])
+ translate(bumper)
rectfromto(camera_pos_tl, camera_pos_br);
// struts (invisible, because they're buried in the case)
rectfromto(camera_pos_tl, camera_pos_br);
// struts (invisible, because they're buried in the case)
@@
-401,7
+403,7
@@
module TestSelectCamera(){
linear_extrude(height = 50)
mirror([0, 1, 0])
rectfromto([-20, -20],
linear_extrude(height = 50)
mirror([0, 1, 0])
rectfromto([-20, -20],
- camera_pos_br + [ 5, 5 ]);
+ camera_pos_br +
bumper +
[ 5, 5 ]);
}
module TestCamera(){ ////toplevel
}
module TestCamera(){ ////toplevel