+CHANGES WITH 218:
+
+ * If compiled with --enable-xkbcommon, systemd-localed will
+ verify x11 keymap settings by compiling the given keymap. It
+ will spew out warnings if the compilation fails. This
+ requires libxkbcommon to be installed.
+
+CHANGES WITH 217:
+
+ * journalctl gained the new options -t/--identifier= to match
+ on the syslog identifier (aka "tag"), as well as --utc to
+ show log timestamps in the UTC timezone. journalctl now also
+ accepts -n/--lines=all to disable line capping in a pager.
+
+ * journalctl gained a new switch, --flush, that synchronously
+ flushes logs from /run/log/journal to /var/log/journal if
+ persistent storage is enabled. systemd-journal-flush.service
+ now waits until the operation is complete.
+
+ * Services can notify the manager before they start a reload
+ (by sending RELOADING=1) or shutdown (by sending
+ STOPPING=1). This allows the manager to track and show the
+ internal state of daemons and closes a race condition when
+ the process is still running but has closed its D-Bus
+ connection.
+
+ * Services with Type=oneshot do not have to have any ExecStart
+ commands anymore.
+
+ * User units are now loaded also from
+ $XDG_RUNTIME_DIR/systemd/user/. This is similar to the
+ /run/systemd/user directory that was already previously
+ supported, but is under the control of the user.
+
+ * Job timeouts (i.e. time-outs on the time a job that is
+ queued stays in the run queue) can now optionally result in
+ immediate reboot or power-off actions (JobTimeoutAction= and
+ JobTimeoutRebootArgument=). This is useful on ".target"
+ units, to limit the maximum time a target remains
+ undispatched in the run queue, and to trigger an emergency
+ operation in such a case. This is now used by default to
+ turn off the system if boot-up (as defined by everything in
+ basic.target) hangs and does not complete for at least
+ 15min. Also, if power-off or reboot hang for at least 30min
+ an immediate power-off/reboot operation is triggered. This
+ functionality is particularly useful to increase reliability
+ on embedded devices, but also on laptops which might
+ accidentally get powered on when carried in a backpack and
+ whose boot stays stuck in a hard disk encryption passphrase
+ question.
+
+ * systemd-logind can be configured to also handle lid switch
+ events even when the machine is docked or multiple displays
+ are attached (HandleLidSwitchDocked= option).
+
+ * A helper binary and a service have been added which can be
+ used to resume from hibernation in the initramfs. A
+ generator will parse the resume= option on the kernel
+ command line to trigger resume.
+
+ * A user console daemon systemd-consoled has been
+ added. Currently, it is a preview, and will so far open a
+ single terminal on each session of the user marked as
+ Desktop=systemd-console.
+
+ * Route metrics can be specified for DHCP routes added by
+ systemd-networkd.
+
+ * The SELinux context of socket-activated services can be set
+ from the information provided by the networking stack
+ (SELinuxContextFromNet= option).
+
+ * Userspace firmware loading support has been removed and
+ the minimum supported kernel version is thus bumped to 3.7.
+
+ * Timeout for udev workers has been increased from 1 to 3
+ minutes, but a warning will be printed after 1 minute to
+ help diagnose kernel modules that take a long time to load.
+
+ * Udev rules can now remove tags on devices with TAG-="foobar".
+
+ * systemd's readahead implementation has been removed. In many
+ circumstances it didn't give expected benefits even for
+ rotational disk drives and was becoming less relevant in the
+ age of SSDs. As none of the developers has been using
+ rotating media anymore, and nobody stepped up to actively
+ maintain this component of systemd it has now been removed.
+
+ * Swap units can use Options= to specify discard options.
+ Discard options specified for swaps in /etc/fstab are now
+ respected.
+
+ * Docker containers are now detected as a separate type of
+ virtualization.
+
+ * The Password Agent protocol gained support for queries where
+ the user input is shown, useful e.g. for user names.
+ systemd-ask-password gained a new --echo option to turn that
+ on.
+
+ * The default sysctl.d/ snippets will now set:
+
+ net.core.default_qdisc = fq_codel
+
+ This selects Fair Queuing Controlled Delay as the default
+ queuing discipline for network interfaces. fq_codel helps
+ fight the network bufferbloat problem. It is believed to be
+ a good default with no tuning required for most workloads.
+ Downstream distributions may override this choice. On 10Gbit
+ servers that do not do forwarding, "fq" may perform better.
+ Systems without a good clocksource should use "pfifo_fast".
+
+ * If kdbus is enabled during build a new option BusPolicy= is
+ available for service units, that allows locking all service
+ processes into a stricter bus policy, in order to limit
+ access to various bus services, or even hide most of them
+ from the service's view entirely.
+
+ * networkctl will now show the .network and .link file
+ networkd has applied to a specific interface.
+
+ * sd-login gained a new API call sd_session_get_desktop() to
+ query which desktop environment has been selected for a
+ session.
+
+ * UNIX utmp support is now compile-time optional to support
+ legacy-free systems.
+
+ * systemctl gained two new commands "add-wants" and
+ "add-requires" for pulling in units from specific targets
+ easily.
+
+ * If the word "rescue" is specified on the kernel command line
+ the system will now boot into rescue mode (aka
+ rescue.target), which was previously available only by
+ specifying "1" or "systemd.unit=rescue.target" on the kernel
+ command line. This new kernel command line option nicely
+ mirrors the already existing "emergency" kernel command line
+ option.
+
+ * New kernel command line options mount.usr=, mount.usrflags=,
+ mount.usrfstype= have been added that match root=, rootflags=,
+ rootfstype= but allow mounting a specific file system to
+ /usr.
+
+ * The $NOTIFY_SOCKET is now also passed to control processes of
+ services, not only the main process.
+
+ * This version reenables support for fsck's -l switch. This
+ means at least version v2.25 of util-linux is required for
+ operation, otherwise dead-locks on device nodes may
+ occur. Again: you need to update util-linux to at least
+ v2.25 when updating systemd to v217.
+
+ * The "multi-seat-x" tool has been removed from systemd, as
+ its functionality has been integrated into X servers 1.16,
+ and the tool is hence redundant. It is recommended to update
+ display managers invoking this tool to simply invoke X
+ directly from now on, again.
+
+ * Support for the new ALLOW_INTERACTIVE_AUTHORIZATION D-Bus
+ message flag has been added for all of systemd's PolicyKit
+ authenticated method calls has been added. In particular
+ this now allows optional interactive authorization via
+ PolicyKit for many of PID1's privileged operations such as
+ unit file enabling and disabling.
+
+ * "udevadm hwdb --update" learnt a new switch "--usr" for
+ placing the rebuilt hardware database in /usr instead of
+ /etc. When used only hardware database entries stored in
+ /usr will be used, and any user database entries in /etc are
+ ignored. This functionality is useful for vendors to ship a
+ pre-built database on systems where local configuration is
+ unnecessary or unlikely.
+
+ * Calendar time specifications in .timer units now also
+ understand the strings "semi-annually", "quarterly" and
+ "minutely" as shortcuts (in addition to the preexisting
+ "anually", "hourly", ...).
+
+ * systemd-tmpfiles will now correctly create files in /dev
+ at boot which are marked for creation only at boot. It is
+ recommended to always create static device nodes with 'c!'
+ and 'b!', so that they are created only at boot and not
+ overwritten at runtime.
+
+ * When the watchdog logic is used for a service (WatchdogSec=)
+ and the watchdog timeout is hit the service will now be
+ terminated with SIGABRT (instead of just SIGTERM), in order
+ to make sure a proper coredump and backtrace is
+ generated. This ensures that hanging services will result in
+ similar coredump/backtrace behaviour as services that hit a
+ segmentation fault.
+
+ Contributions from: Andreas Henriksson, Andrei Borzenkov,
+ Angus Gibson, Ansgar Burchardt, Ben Wolsieffer, Brandon L.
+ Black, Christian Hesse, Cristian Rodríguez, Daniel Buch,
+ Daniele Medri, Daniel Mack, Dan Williams, Dave Reisner, David
+ Herrmann, David Sommerseth, David Strauss, Emil Renner
+ Berthing, Eric Cook, Evangelos Foutras, Filipe Brandenburger,
+ Gustavo Sverzut Barbieri, Hans de Goede, Harald Hoyer, Hristo
+ Venev, Hugo Grostabussiat, Ivan Shapovalov, Jan Janssen, Jan
+ Synacek, Jonathan Liu, Juho Son, Karel Zak, Kay Sievers, Klaus
+ Purer, Koen Kooi, Lennart Poettering, Lukas Nykryn, Lukasz
+ Skalski, Łukasz Stelmach, Mantas Mikulėnas, Marcel Holtmann,
+ Marius Tessmann, Marko Myllynen, Martin Pitt, Michael Biebl,
+ Michael Marineau, Michael Olbrich, Michael Scherer, Michal
+ Schmidt, Michal Sekletar, Miroslav Lichvar, Patrik Flykt,
+ Philippe De Swert, Piotr Drąg, Rahul Sundaram, Richard
+ Weinberger, Robert Milasan, Ronny Chevalier, Ruben Kerkhof,
+ Santiago Vila, Sergey Ptashnick, Simon McVittie, Sjoerd
+ Simons, Stefan Brüns, Steven Allen, Steven Noonan, Susant
+ Sahani, Sylvain Plantefève, Thomas Hindoe Paaboel Andersen,
+ Timofey Titovets, Tobias Hunger, Tom Gundersen, Torstein
+ Husebø, Umut Tezduyar Lindskog, WaLyong Cho, Zbigniew
+ Jędrzejewski-Szmek.
+
+ -- Berlin, 2014-10-28
+
+CHANGES WITH 216:
+
+ * timedated no longer reads NTP implementation unit names from
+ /usr/lib/systemd/ntp-units.d/*.list. Alternative NTP
+ implementations should add a
+
+ Conflicts=systemd-timesyncd.service
+
+ to their unit files to take over and replace systemd's NTP
+ default functionality.
+
+ * systemd-sysusers gained a new line type "r" for configuring
+ which UID/GID ranges to allocate system users/groups
+ from. Lines of type "u" may now add an additional column
+ that specifies the home directory for the system user to be
+ created. Also, systemd-sysusers may now optionally read user
+ information from STDIN instead of a file. This is useful for
+ invoking it from RPM preinst scriptlets that need to create
+ users before the first RPM file is installed since these
+ files might need to be owned by them. A new
+ %sysusers_create_inline RPM macro has been introduced to do
+ just that. systemd-sysusers now updates the shadow files as
+ well as the user/group databases, which should enhance
+ compatibility with certain tools like grpck.
+
+ * A number of bus APIs of PID 1 now optionally consult
+ PolicyKit to permit access for otherwise unprivileged
+ clients under certain conditions. Note that this currently
+ doesn't support interactive authentication yet, but this is
+ expected to be added eventually, too.
+
+ * /etc/machine-info now has new fields for configuring the
+ deployment environment of the machine, as well as the
+ location of the machine. hostnamectl has been updated with
+ new command to update these fields.
+
+ * systemd-timesyncd has been updated to automatically acquire
+ NTP server information from systemd-networkd, which might
+ have been discovered via DHCP.
+
+ * systemd-resolved now includes a caching DNS stub resolver
+ and a complete LLMNR name resolution implementation. A new
+ NSS module "nss-resolve" has been added which can be used
+ instead of glibc's own "nss-dns" to resolve hostnames via
+ systemd-resolved. Hostnames, addresses and arbitrary RRs may
+ be resolved via systemd-resolved D-Bus APIs. In contrast to
+ the glibc internal resolver systemd-resolved is aware of
+ multi-homed system, and keeps DNS server and caches separate
+ and per-interface. Queries are sent simultaneously on all
+ interfaces that have DNS servers configured, in order to
+ properly handle VPNs and local LANs which might resolve
+ separate sets of domain names. systemd-resolved may acquire
+ DNS server information from systemd-networkd automatically,
+ which in turn might have discovered them via DHCP. A tool
+ "systemd-resolve-host" has been added that may be used to
+ query the DNS logic in resolved. systemd-resolved implements
+ IDNA and automatically uses IDNA or UTF-8 encoding depending
+ on whether classic DNS or LLMNR is used as transport. In the
+ next releases we intend to add a DNSSEC and mDNS/DNS-SD
+ implementation to systemd-resolved.
+
+ * A new NSS module nss-mymachines has been added, that
+ automatically resolves the names of all local registered
+ containers to their respective IP addresses.
+
+ * A new client tool "networkctl" for systemd-networkd has been
+ added. It currently is entirely passive and will query
+ networking configuration from udev, rtnetlink and networkd,
+ and present it to the user in a very friendly
+ way. Eventually, we hope to extend it to become a full
+ control utility for networkd.
+
+ * .socket units gained a new DeferAcceptSec= setting that
+ controls the kernels' TCP_DEFER_ACCEPT sockopt for
+ TCP. Similar, support for controlling TCP keep-alive
+ settings has been added (KeepAliveTimeSec=,
+ KeepAliveIntervalSec=, KeepAliveProbes=). Also, support for
+ turning off Nagle's algorithm on TCP has been added
+ (NoDelay=).
+
+ * logind learned a new session type "web", for use in projects
+ like Cockpit which register web clients as PAM sessions.
+
+ * timer units with at least one OnCalendar= setting will now
+ be started only after timer-sync.target has been
+ reached. This way they will not elapse before the system
+ clock has been corrected by a local NTP client or
+ similar. This is particular useful on RTC-less embedded
+ machines, that come up with an invalid system clock.
+
+ * systemd-nspawn's --network-veth= switch should now result in
+ stable MAC addresses for both the outer and the inner side
+ of the link.
+
+ * systemd-nspawn gained a new --volatile= switch for running
+ container instances with /etc or /var unpopulated.
+
+ * The kdbus client code has been updated to use the new Linux
+ 3.17 memfd subsystem instead of the old kdbus-specific one.
+
+ * systemd-networkd's DHCP client and server now support
+ FORCERENEW. There are also new configuration options to
+ configure the vendor client identifier and broadcast mode
+ for DHCP.
+
+ * systemd will no longer inform the kernel about the current
+ timezone, as this is necessarily incorrect and racy as the
+ kernel has no understanding of DST and similar
+ concepts. This hence means FAT timestamps will be always
+ considered UTC, similar to what Android is already
+ doing. Also, when the RTC is configured to the local time
+ (rather than UTC) systemd will never synchronize back to it,
+ as this might confuse Windows at a later boot.
+
+ * systemd-analyze gained a new command "verify" for offline
+ validation of unit files.
+
+ * systemd-networkd gained support for a couple of additional
+ settings for bonding networking setups. Also, the metric for
+ statically configured routes may now be configured. For
+ network interfaces where this is appropriate the peer IP
+ address may now be configured.
+
+ * systemd-networkd's DHCP client will no longer request
+ broadcasting by default, as this tripped up some networks.
+ For hardware where broadcast is required the feature should
+ be switched back on using RequestBroadcast=yes.
+
+ * systemd-networkd will now set up IPv4LL addresses (when
+ enabled) even if DHCP is configured successfully.
+
+ * udev will now default to respect network device names given
+ by the kernel when the kernel indicates that these are
+ predictable. This behavior can be tweaked by changing
+ NamePolicy= in the relevant .link file.
+
+ * A new library systemd-terminal has been added that
+ implements full TTY stream parsing and rendering. This
+ library is supposed to be used later on for implementing a
+ full userspace VT subsystem, replacing the current kernel
+ implementation.
+
+ * A new tool systemd-journal-upload has been added to push
+ journal data to a remote system running
+ systemd-journal-remote.
+
+ * journald will no longer forward all local data to another
+ running syslog daemon. This change has been made because
+ rsyslog (which appears to be the most commonly used syslog
+ implementation these days) no longer makes use of this, and
+ instead pulls the data out of the journal on its own. Since
+ forwarding the messages to a non-existent syslog server is
+ more expensive than we assumed we have now turned this
+ off. If you run a syslog server that is not a recent rsyslog
+ version, you have to turn this option on again
+ (ForwardToSyslog= in journald.conf).
+
+ * journald now optionally supports the LZ4 compressor for
+ larger journal fields. This compressor should perform much
+ better than XZ which was the previous default.
+
+ * machinectl now shows the IP addresses of local containers,
+ if it knows them, plus the interface name of the container.
+
+ * A new tool "systemd-escape" has been added that makes it
+ easy to escape strings to build unit names and similar.
+
+ * sd_notify() messages may now include a new ERRNO= field
+ which is parsed and collected by systemd and shown among the
+ "systemctl status" output for a service.
+
+ * A new component "systemd-firstboot" has been added that
+ queries the most basic systemd information (timezone,
+ hostname, root password) interactively on first
+ boot. Alternatively it may also be used to provision these
+ things offline on OS images installed into directories.
+
+ * The default sysctl.d/ snippets will now set
+
+ net.ipv4.conf.default.promote_secondaries=1
+
+ This has the benefit of no flushing secondary IP addresses
+ when primary addresses are removed.
+
+ Contributions from: Ansgar Burchardt, Bastien Nocera, Colin
+ Walters, Dan Dedrick, Daniel Buch, Daniel Korostil, Daniel
+ Mack, Dan Williams, Dave Reisner, David Herrmann, Denis
+ Kenzior, Eelco Dolstra, Eric Cook, Hannes Reinecke, Harald
+ Hoyer, Hong Shick Pak, Hui Wang, Jean-André Santoni, Jóhann
+ B. Guðmundsson, Jon Severinsson, Karel Zak, Kay Sievers, Kevin
+ Wells, Lennart Poettering, Lukas Nykryn, Mantas Mikulėnas,
+ Marc-Antoine Perennou, Martin Pitt, Michael Biebl, Michael
+ Marineau, Michael Olbrich, Michal Schmidt, Michal Sekletar,
+ Miguel Angel Ajo, Mike Gilbert, Olivier Brunel, Robert
+ Schiele, Ronny Chevalier, Simon McVittie, Sjoerd Simons, Stef
+ Walter, Steven Noonan, Susant Sahani, Tanu Kaskinen, Thomas
+ Blume, Thomas Hindoe Paaboel Andersen, Timofey Titovets,
+ Tobias Geerinckx-Rice, Tomasz Torcz, Tom Gundersen, Umut
+ Tezduyar Lindskog, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-08-19
+
+CHANGES WITH 215:
+
+ * A new tool systemd-sysusers has been added. This tool
+ creates system users and groups in /etc/passwd and
+ /etc/group, based on static declarative system user/group
+ definitions in /usr/lib/sysusers.d/. This is useful to
+ enable factory resets and volatile systems that boot up with
+ an empty /etc directory, and thus need system users and
+ groups created during early boot. systemd now also ships
+ with two default sysusers.d/ files for the most basic
+ users and groups systemd and the core operating system
+ require.
+
+ * A new tmpfiles snippet has been added that rebuilds the
+ essential files in /etc on boot, should they be missing.
+
+ * A directive for ensuring automatic clean-up of
+ /var/cache/man/ has been removed from the default
+ configuration. This line should now be shipped by the man
+ implementation. The necessary change has been made to the
+ man-db implementation. Note that you need to update your man
+ implementation to one that ships this line, otherwise no
+ automatic clean-up of /var/cache/man will take place.
+
+ * A new condition ConditionNeedsUpdate= has been added that
+ may conditionalize services to only run when /etc or /var
+ are "older" than the vendor operating system resources in
+ /usr. This is useful for reconstructing or updating /etc
+ after an offline update of /usr or a factory reset, on the
+ next reboot. Services that want to run once after such an
+ update or reset should use this condition and order
+ themselves before the new systemd-update-done.service, which
+ will mark the two directories as fully updated. A number of
+ service files have been added making use of this, to rebuild
+ the udev hardware database, the journald message catalog and
+ dynamic loader cache (ldconfig). The systemd-sysusers tool
+ described above also makes use of this now. With this in
+ place it is now possible to start up a minimal operating
+ system with /etc empty cleanly. For more information on the
+ concepts involved see this recent blog story:
+
+ http://0pointer.de/blog/projects/stateless.html
+
+ * A new system group "input" has been introduced, and all
+ input device nodes get this group assigned. This is useful
+ for system-level software to get access to input devices. It
+ complements what is already done for "audio" and "video".
+
+ * systemd-networkd learnt minimal DHCPv4 server support in
+ addition to the existing DHCPv4 client support. It also
+ learnt DHCPv6 client and IPv6 Router Solicitation client
+ support. The DHCPv4 client gained support for static routes
+ passed in from the server. Note that the [DHCPv4] section
+ known in older systemd-networkd versions has been renamed to
+ [DHCP] and is now also used by the DHCPv6 client. Existing
+ .network files using settings of this section should be
+ updated, though compatibility is maintained. Optionally, the
+ client hostname may now be sent to the DHCP server.
+
+ * networkd gained support for vxlan virtual networks as well
+ as tun/tap and dummy devices.
+
+ * networkd gained support for automatic allocation of address
+ ranges for interfaces from a system-wide pool of
+ addresses. This is useful for dynamically managing a large
+ number of interfaces with a single network configuration
+ file. In particular this is useful to easily assign
+ appropriate IP addresses to the veth links of a large number
+ of nspawn instances.
+
+ * RPM macros for processing sysusers, sysctl and binfmt
+ drop-in snippets at package installation time have been
+ added.
+
+ * The /etc/os-release file should now be placed in
+ /usr/lib/os-release. The old location is automatically
+ created as symlink. /usr/lib is the more appropriate
+ location of this file, since it shall actually describe the
+ vendor operating system shipped in /usr, and not the
+ configuration stored in /etc.
+
+ * .mount units gained a new boolean SloppyOptions= setting
+ that maps to mount(8)'s -s option which enables permissive
+ parsing of unknown mount options.
+
+ * tmpfiles learnt a new "L+" directive which creates a symlink
+ but (unlike "L") deletes a pre-existing file first, should
+ it already exist and not already be the correct
+ symlink. Similar, "b+", "c+" and "p+" directives have been
+ added as well, which create block and character devices, as
+ well as fifos in the filesystem, possibly removing any
+ pre-existing files of different types.
+
+ * For tmpfiles' "L", "L+", "C" and "C+" directives the final
+ 'argument' field (which so far specified the source to
+ symlink/copy the files from) is now optional. If omitted the
+ same file os copied from /usr/share/factory/ suffixed by the
+ full destination path. This is useful for populating /etc
+ with essential files, by copying them from vendor defaults
+ shipped in /usr/share/factory/etc.
+
+ * A new command "systemctl preset-all" has been added that
+ applies the service preset settings to all installed unit
+ files. A new switch --preset-mode= has been added that
+ controls whether only enable or only disable operations
+ shall be executed.
+
+ * A new command "systemctl is-system-running" has been added
+ that allows checking the overall state of the system, for
+ example whether it is fully up and running.
+
+ * When the system boots up with an empty /etc, the equivalent
+ to "systemctl preset-all" is executed during early boot, to
+ make sure all default services are enabled after a factory
+ reset.
+
+ * systemd now contains a minimal preset file that enables the
+ most basic services systemd ships by default.
+
+ * Unit files' [Install] section gained a new DefaultInstance=
+ field for defining the default instance to create if a
+ template unit is enabled with no instance specified.
+
+ * A new passive target cryptsetup-pre.target has been added
+ that may be used by services that need to make they run and
+ finish before the first LUKS cryptographic device is set up.
+
+ * The /dev/loop-control and /dev/btrfs-control device nodes
+ are now owned by the "disk" group by default, opening up
+ access to this group.
+
+ * systemd-coredump will now automatically generate a
+ stack trace of all core dumps taking place on the system,
+ based on elfutils' libdw library. This stack trace is logged
+ to the journal.
+
+ * systemd-coredump may now optionally store coredumps directly
+ on disk (in /var/lib/systemd/coredump, possibly compressed),
+ instead of storing them unconditionally in the journal. This
+ mode is the new default. A new configuration file
+ /etc/systemd/coredump.conf has been added to configure this
+ and other parameters of systemd-coredump.
+
+ * coredumpctl gained a new "info" verb to show details about a
+ specific coredump. A new switch "-1" has also been added
+ that makes sure to only show information about the most
+ recent entry instead of all entries. Also, as the tool is
+ generally useful now the "systemd-" prefix of the binary
+ name has been removed. Distributions that want to maintain
+ compatibility with the old name should add a symlink from
+ the old name to the new name.
+
+ * journald's SplitMode= now defaults to "uid". This makes sure
+ that unprivileged users can access their own coredumps with
+ coredumpctl without restrictions.
+
+ * New kernel command line options "systemd.wants=" (for
+ pulling an additional unit during boot), "systemd.mask="
+ (for masking a specific unit for the boot), and
+ "systemd.debug-shell" (for enabling the debug shell on tty9)
+ have been added. This is implemented in the new generator
+ "systemd-debug-generator".
+
+ * systemd-nspawn will now by default filter a couple of
+ syscalls for containers, among them those required for
+ kernel module loading, direct x86 IO port access, swap
+ management, and kexec. Most importantly though
+ open_by_handle_at() is now prohibited for containers,
+ closing a hole similar to a recently discussed vulnerability
+ in docker regarding access to files on file hierarchies the
+ container should normally not have access to. Note that for
+ nspawn we generally make no security claims anyway (and
+ this is explicitly documented in the man page), so this is
+ just a fix for one of the most obvious problems.
+
+ * A new man page file-hierarchy(7) has been added that
+ contains a minimized, modernized version of the file system
+ layout systemd expects, similar in style to the FHS
+ specification or hier(5). A new tool systemd-path(1) has
+ been added to query many of these paths for the local
+ machine and user.
+
+ * Automatic time-based clean-up of $XDG_RUNTIME_DIR is no
+ longer done. Since the directory now has a per-user size
+ limit, and is cleaned on logout this appears unnecessary,
+ in particular since this now brings the lifecycle of this
+ directory closer in line with how IPC objects are handled.
+
+ * systemd.pc now exports a number of additional directories,
+ including $libdir (which is useful to identify the library
+ path for the primary architecture of the system), and a
+ couple of drop-in directories.
+
+ * udev's predictable network interface names now use the dev_port
+ sysfs attribute, introduced in linux 3.15 instead of dev_id to
+ distinguish between ports of the same PCI function. dev_id should
+ only be used for ports using the same HW address, hence the need
+ for dev_port.
+
+ * machined has been updated to export the OS version of a
+ container (read from /etc/os-release and
+ /usr/lib/os-release) on the bus. This is now shown in
+ "machinectl status" for a machine.
+
+ * A new service setting RestartForceExitStatus= has been
+ added. If configured to a set of exit signals or process
+ return values, the service will be restarted when the main
+ daemon process exits with any of them, regardless of the
+ Restart= setting.
+
+ * systemctl's -H switch for connecting to remote systemd
+ machines has been extended so that it may be used to
+ directly connect to a specific container on the
+ host. "systemctl -H root@foobar:waldi" will now connect as
+ user "root" to host "foobar", and then proceed directly to
+ the container named "waldi". Note that currently you have to
+ authenticate as user "root" for this to work, as entering
+ containers is a privileged operation.
+
+ Contributions from: Andreas Henriksson, Benjamin Steinwender,
+ Carl Schaefer, Christian Hesse, Colin Ian King, Cristian
+ Rodríguez, Daniel Mack, Dave Reisner, David Herrmann, Eugene
+ Yakubovich, Filipe Brandenburger, Frederic Crozat, Hristo
+ Venev, Jan Engelhardt, Jonathan Boulle, Kay Sievers, Lennart
+ Poettering, Luke Shumaker, Mantas Mikulėnas, Marc-Antoine
+ Perennou, Marcel Holtmann, Michael Marineau, Michael Olbrich,
+ Michał Bartoszkiewicz, Michal Sekletar, Patrik Flykt, Ronan Le
+ Martret, Ronny Chevalier, Ruediger Oertel, Steven Noonan,
+ Susant Sahani, Thadeu Lima de Souza Cascardo, Thomas Hindoe
+ Paaboel Andersen, Tom Gundersen, Tom Hirst, Umut Tezduyar
+ Lindskog, Uoti Urpala, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-07-03
+
+CHANGES WITH 214:
+
+ * As an experimental feature, udev now tries to lock the
+ disk device node (flock(LOCK_SH|LOCK_NB)) while it
+ executes events for the disk or any of its partitions.
+ Applications like partitioning programs can lock the
+ disk device node (flock(LOCK_EX)) and claim temporary
+ device ownership that way; udev will entirely skip all event
+ handling for this disk and its partitions. If the disk
+ was opened for writing, the close will trigger a partition
+ table rescan in udev's "watch" facility, and if needed
+ synthesize "change" events for the disk and all its partitions.
+ This is now unconditionally enabled, and if it turns out to
+ cause major problems, we might turn it on only for specific
+ devices, or might need to disable it entirely. Device Mapper
+ devices are excluded from this logic.
+
+ * We temporarily dropped the "-l" switch for fsck invocations,
+ since they collide with the flock() logic above. util-linux
+ upstream has been changed already to avoid this conflict,
+ and we will readd "-l" as soon as util-linux with this
+ change has been released.
+
+ * The dependency on libattr has been removed. Since a long
+ time, the extended attribute calls have moved to glibc, and
+ libattr is thus unnecessary.
+
+ * Virtualization detection works without priviliges now. This
+ means the systemd-detect-virt binary no longer requires
+ CAP_SYS_PTRACE file capabilities, and our daemons can run
+ with fewer privileges.
+
+ * systemd-networkd now runs under its own "systemd-network"
+ user. It retains the CAP_NET_ADMIN, CAP_NET_BIND_SERVICE,
+ CAP_NET_BROADCAST, CAP_NET_RAW capabilities though, but
+ loses the ability to write to files owned by root this way.
+
+ * Similar, systemd-resolved now runs under its own
+ "systemd-resolve" user with no capabilities remaining.
+
+ * Similar, systemd-bus-proxyd now runs under its own
+ "systemd-bus-proxy" user with only CAP_IPC_OWNER remaining.
+
+ * systemd-networkd gained support for setting up "veth"
+ virtual ethernet devices for container connectivity, as well
+ as GRE and VTI tunnels.
+
+ * systemd-networkd will no longer automatically attempt to
+ manually load kernel modules necessary for certain tunnel
+ transports. Instead, it is assumed the kernel loads them
+ automatically when required. This only works correctly on
+ very new kernels. On older kernels, please consider adding
+ the kernel modules to /etc/modules-load.d/ as a work-around.
+
+ * The resolv.conf file systemd-resolved generates has been
+ moved to /run/systemd/resolve/. If you have a symlink from
+ /etc/resolv.conf, it might be necessary to correct it.
+
+ * Two new service settings, ProtectHome= and ProtectSystem=,
+ have been added. When enabled, they will make the user data
+ (such as /home) inaccessible or read-only and the system
+ (such as /usr) read-only, for specific services. This allows
+ very light-weight per-service sandboxing to avoid
+ modifications of user data or system files from
+ services. These two new switches have been enabled for all
+ of systemd's long-running services, where appropriate.
+
+ * Socket units gained new SocketUser= and SocketGroup=
+ settings to set the owner user and group of AF_UNIX sockets
+ and FIFOs in the file system.
+
+ * Socket units gained a new RemoveOnStop= setting. If enabled,
+ all FIFOS and sockets in the file system will be removed
+ when the specific socket unit is stopped.
+
+ * Socket units gained a new Symlinks= setting. It takes a list
+ of symlinks to create to file system sockets or FIFOs
+ created by the specific Unix sockets. This is useful to
+ manage symlinks to socket nodes with the same life-cycle as
+ the socket itself.
+
+ * The /dev/log socket and /dev/initctl FIFO have been moved to
+ /run, and have been replaced by symlinks. This allows
+ connecting to these facilities even if PrivateDevices=yes is
+ used for a service (which makes /dev/log itself unavailable,
+ but /run is left). This also has the benefit of ensuring
+ that /dev only contains device nodes, directories and
+ symlinks, and nothing else.
+
+ * sd-daemon gained two new calls sd_pid_notify() and
+ sd_pid_notifyf(). They are similar to sd_notify() and
+ sd_notifyf(), but allow overriding of the source PID of
+ notification messages if permissions permit this. This is
+ useful to send notify messages on behalf of a different
+ process (for example, the parent process). The
+ systemd-notify tool has been updated to make use of this
+ when sending messages (so that notification messages now
+ originate from the shell script invoking systemd-notify and
+ not the systemd-notify process itself. This should minimize
+ a race where systemd fails to associate notification
+ messages to services when the originating process already
+ vanished.
+
+ * A new "on-abnormal" setting for Restart= has been added. If
+ set, it will result in automatic restarts on all "abnormal"
+ reasons for a process to exit, which includes unclean
+ signals, core dumps, timeouts and watchdog timeouts, but
+ does not include clean and unclean exit codes or clean
+ signals. Restart=on-abnormal is an alternative for
+ Restart=on-failure for services that shall be able to
+ terminate and avoid restarts on certain errors, by
+ indicating so with an unclean exit code. Restart=on-failure
+ or Restart=on-abnormal is now the recommended setting for
+ all long-running services.
+
+ * If the InaccessibleDirectories= service setting points to a
+ mount point (or if there are any submounts contained within
+ it), it is now attempted to completely unmount it, to make
+ the file systems truly unavailable for the respective
+ service.
+
+ * The ReadOnlyDirectories= service setting and
+ systemd-nspawn's --read-only parameter are now recursively
+ applied to all submounts, too.
+
+ * Mount units may now be created transiently via the bus APIs.
+
+ * The support for SysV and LSB init scripts has been removed
+ from the systemd daemon itself. Instead, it is now
+ implemented as a generator that creates native systemd units
+ from these scripts when needed. This enables us to remove a
+ substantial amount of legacy code from PID 1, following the
+ fact that many distributions only ship a very small number
+ of LSB/SysV init scripts nowadays.
+
+ * Priviliged Xen (dom0) domains are not considered
+ virtualization anymore by the virtualization detection
+ logic. After all, they generally have unrestricted access to
+ the hardware and usually are used to manage the unprivileged
+ (domU) domains.
+
+ * systemd-tmpfiles gained a new "C" line type, for copying
+ files or entire directories.
+
+ * systemd-tmpfiles "m" lines are now fully equivalent to "z"
+ lines. So far, they have been non-globbing versions of the
+ latter, and have thus been redundant. In future, it is
+ recommended to only use "z". "m" has hence been removed
+ from the documentation, even though it stays supported.
+
+ * A tmpfiles snippet to recreate the most basic structure in
+ /var has been added. This is enough to create the /var/run →
+ /run symlink and create a couple of structural
+ directories. This allows systems to boot up with an empty or
+ volatile /var. Of course, while with this change, the core OS
+ now is capable with dealing with a volatile /var, not all
+ user services are ready for it. However, we hope that sooner
+ or later, many service daemons will be changed upstream so
+ that they are able to automatically create their necessary
+ directories in /var at boot, should they be missing. This is
+ the first step to allow state-less systems that only require
+ the vendor image for /usr to boot.
+
+ * systemd-nspawn has gained a new --tmpfs= switch to mount an
+ empty tmpfs instance to a specific directory. This is
+ particularly useful for making use of the automatic
+ reconstruction of /var (see above), by passing --tmpfs=/var.
+
+ * Access modes specified in tmpfiles snippets may now be
+ prefixed with "~", which indicates that they shall be masked
+ by whether the existing file or directory is currently
+ writable, readable or executable at all. Also, if specified,
+ the sgid/suid/sticky bits will be masked for all
+ non-directories.
+
+ * A new passive target unit "network-pre.target" has been
+ added which is useful for services that shall run before any
+ network is configured, for example firewall scripts.
+
+ * The "floppy" group that previously owned the /dev/fd*
+ devices is no longer used. The "disk" group is now used
+ instead. Distributions should probably deprecate usage of
+ this group.
+
+ Contributions from: Camilo Aguilar, Christian Hesse, Colin Ian
+ King, Cristian Rodríguez, Daniel Buch, Dave Reisner, David
+ Strauss, Denis Tikhomirov, John, Jonathan Liu, Kay Sievers,
+ Lennart Poettering, Mantas Mikulėnas, Mark Eichin, Ronny
+ Chevalier, Susant Sahani, Thomas Blume, Thomas Hindoe Paaboel
+ Andersen, Tom Gundersen, Umut Tezduyar Lindskog, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Berlin, 2014-06-11
+
+CHANGES WITH 213:
+
+ * A new "systemd-timesyncd" daemon has been added for
+ synchronizing the system clock across the network. It
+ implements an SNTP client. In contrast to NTP
+ implementations such as chrony or the NTP reference server,
+ this only implements a client side, and does not bother with
+ the full NTP complexity, focusing only on querying time from
+ one remote server and synchronizing the local clock to
+ it. Unless you intend to serve NTP to networked clients or
+ want to connect to local hardware clocks, this simple NTP
+ client should be more than appropriate for most
+ installations. The daemon runs with minimal privileges, and
+ has been hooked up with networkd to only operate when
+ network connectivity is available. The daemon saves the
+ current clock to disk every time a new NTP sync has been
+ acquired, and uses this to possibly correct the system clock
+ early at bootup, in order to accommodate for systems that
+ lack an RTC such as the Raspberry Pi and embedded devices,
+ and to make sure that time monotonically progresses on these
+ systems, even if it is not always correct. To make use of
+ this daemon, a new system user and group "systemd-timesync"
+ needs to be created on installation of systemd.
+
+ * The queue "seqnum" interface of libudev has been disabled, as
+ it was generally incompatible with device namespacing as
+ sequence numbers of devices go "missing" if the devices are
+ part of a different namespace.
+
+ * "systemctl list-timers" and "systemctl list-sockets" gained
+ a --recursive switch for showing units of these types also
+ for all local containers, similar in style to the already
+ supported --recursive switch for "systemctl list-units".
+
+ * A new RebootArgument= setting has been added for service
+ units, which may be used to specify a kernel reboot argument
+ to use when triggering reboots with StartLimitAction=.
+
+ * A new FailureAction= setting has been added for service
+ units which may be used to specify an operation to trigger
+ when a service fails. This works similarly to
+ StartLimitAction=, but unlike it, controls what is done
+ immediately rather than only after several attempts to
+ restart the service in question.
+
+ * hostnamed got updated to also expose the kernel name,
+ release, and version on the bus. This is useful for
+ executing commands like hostnamectl with the -H switch.
+ systemd-analyze makes use of this to properly display
+ details when running non-locally.
+
+ * The bootchart tool can now show cgroup information in the
+ graphs it generates.
+
+ * The CFS CPU quota cgroup attribute is now exposed for
+ services. The new CPUQuota= switch has been added for this
+ which takes a percentage value. Setting this will have the
+ result that a service may never get more CPU time than the
+ specified percentage, even if the machine is otherwise idle.
+
+ * systemd-networkd learned IPIP and SIT tunnel support.
+
+ * LSB init scripts exposing a dependency on $network will now
+ get a dependency on network-online.target rather than simply
+ network.target. This should bring LSB handling closer to
+ what it was on SysV systems.
+
+ * A new fsck.repair= kernel option has been added to control
+ how fsck shall deal with unclean file systems at boot.
+
+ * The (.ini) configuration file parser will now silently
+ ignore sections whose name begins with "X-". This may be
+ used to maintain application-specific extension sections in unit
+ files.
+
+ * machined gained a new API to query the IP addresses of
+ registered containers. "machinectl status" has been updated
+ to show these addresses in its output.
+
+ * A new call sd_uid_get_display() has been added to the
+ sd-login APIs for querying the "primary" session of a
+ user. The "primary" session of the user is elected from the
+ user's sessions and generally a graphical session is
+ preferred over a text one.
+
+ * A minimal systemd-resolved daemon has been added. It
+ currently simply acts as a companion to systemd-networkd and
+ manages resolv.conf based on per-interface DNS
+ configuration, possibly supplied via DHCP. In the long run
+ we hope to extend this into a local DNSSEC enabled DNS and
+ mDNS cache.
+
+ * The systemd-networkd-wait-online tool is now enabled by
+ default. It will delay network-online.target until a network
+ connection has been configured. The tool primarily integrates
+ with networkd, but will also make a best effort to make sense
+ of network configuration performed in some other way.
+
+ * Two new service options StartupCPUShares= and
+ StartupBlockIOWeight= have been added that work similarly to
+ CPUShares= and BlockIOWeight= however only apply during
+ system startup. This is useful to prioritize certain services
+ differently during bootup than during normal runtime.
+
+ * hostnamed has been changed to prefer the statically
+ configured hostname in /etc/hostname (unless set to
+ 'localhost' or empty) over any dynamic one supplied by
+ dhcp. With this change, the rules for picking the hostname
+ match more closely the rules of other configuration settings
+ where the local administrator's configuration in /etc always
+ overrides any other settings.
+
+ Contributions fron: Ali H. Caliskan, Alison Chaiken, Bas van
+ den Berg, Brandon Philips, Cristian Rodríguez, Daniel Buch,
+ Dan Kilman, Dave Reisner, David Härdeman, David Herrmann,
+ David Strauss, Dimitris Spingos, Djalal Harouni, Eelco
+ Dolstra, Evan Nemerson, Florian Albrechtskirchinger, Greg
+ Kroah-Hartman, Harald Hoyer, Holger Hans Peter Freyther, Jan
+ Engelhardt, Jani Nikula, Jason St. John, Jeffrey Clark,
+ Jonathan Boulle, Kay Sievers, Lennart Poettering, Lukas
+ Nykryn, Lukasz Skalski, Łukasz Stelmach, Mantas Mikulėnas,
+ Marcel Holtmann, Martin Pitt, Matthew Monaco, Michael
+ Marineau, Michael Olbrich, Michal Sekletar, Mike Gilbert, Nis
+ Martensen, Patrik Flykt, Philip Lorenz, poma, Ray Strode,
+ Reyad Attiyat, Robert Milasan, Scott Thrasher, Stef Walter,
+ Steven Siloti, Susant Sahani, Tanu Kaskinen, Thomas Bächler,
+ Thomas Hindoe Paaboel Andersen, Tom Gundersen, Umut Tezduyar
+ Lindskog, WaLyong Cho, Will Woods, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Beijing, 2014-05-28
+
+CHANGES WITH 212:
+
+ * When restoring the screen brightness at boot, stay away from
+ the darkest setting or from the lowest 5% of the available
+ range, depending on which is the larger value of both. This
+ should effectively protect the user from rebooting into a
+ black screen, should the brightness have been set to minimum
+ by accident.
+
+ * sd-login gained a new sd_machine_get_class() call to
+ determine the class ("vm" or "container") of a machine
+ registered with machined.
+
+ * sd-login gained new calls
+ sd_peer_get_{session,owner_uid,unit,user_unit,slice,machine_name}(),
+ to query the identity of the peer of a local AF_UNIX
+ connection. They operate similarly to their sd_pid_get_xyz()
+ counterparts.
+
+ * PID 1 will now maintain a system-wide system state engine
+ with the states "starting", "running", "degraded",
+ "maintenance", "stopping". These states are bound to system
+ startup, normal runtime, runtime with at least one failed
+ service, rescue/emergency mode and system shutdown. This
+ state is shown in the "systemctl status" output when no unit
+ name is passed. It is useful to determine system state, in
+ particularly when doing so for many systems or containers at
+ once.
+
+ * A new command "list-machines" has been added to "systemctl"
+ that lists all local OS containers and shows their system
+ state (see above), if systemd runs inside of them.
+
+ * systemctl gained a new "-r" switch to recursively enumerate
+ units on all local containers, when used with the
+ "list-unit" command (which is the default one that is
+ executed when no parameters are specified).
+
+ * The GPT automatic partition discovery logic will now honour
+ two GPT partition flags: one may be set on a partition to
+ cause it to be mounted read-only, and the other may be set
+ on a partition to ignore it during automatic discovery.
+
+ * Two new GPT type UUIDs have been added for automatic root
+ partition discovery, for 32-bit and 64-bit ARM. This is not
+ particularly useful for discovering the root directory on
+ these architectures during bare-metal boots (since UEFI is
+ not common there), but still very useful to allow booting of
+ ARM disk images in nspawn with the -i option.
+
+ * MAC addresses of interfaces created with nspawn's
+ --network-interface= switch will now be generated from the
+ machine name, and thus be stable between multiple invocations
+ of the container.
+
+ * logind will now automatically remove all IPC objects owned
+ by a user if she or he fully logs out. This makes sure that
+ users who are logged out cannot continue to consume IPC
+ resources. This covers SysV memory, semaphores and message
+ queues as well as POSIX shared memory and message
+ queues. Traditionally, SysV and POSIX IPC had no life-cycle
+ limits. With this functionality, that is corrected. This may
+ be turned off by using the RemoveIPC= switch of logind.conf.
+
+ * The systemd-machine-id-setup and tmpfiles tools gained a
+ --root= switch to operate on a specific root directory,
+ instead of /.
+
+ * journald can now forward logged messages to the TTYs of all
+ logged in users ("wall"). This is the default for all
+ emergency messages now.
+
+ * A new tool systemd-journal-remote has been added to stream
+ journal log messages across the network.
+
+ * /sys/fs/cgroup/ is now mounted read-only after all cgroup
+ controller trees are mounted into it. Note that the
+ directories mounted beneath it are not read-only. This is a
+ security measure and is particularly useful because glibc
+ actually includes a search logic to pick any tmpfs it can
+ find to implement shm_open() if /dev/shm is not available
+ (which it might very well be in namespaced setups).
+
+ * machinectl gained a new "poweroff" command to cleanly power
+ down a local OS container.
+
+ * The PrivateDevices= unit file setting will now also drop the
+ CAP_MKNOD capability from the capability bound set, and
+ imply DevicePolicy=closed.
+
+ * PrivateDevices=, PrivateNetwork= and PrivateTmp= is now used
+ comprehensively on all long-running systemd services where
+ this is appropriate.
+
+ * systemd-udevd will now run in a disassociated mount
+ namespace. To mount directories from udev rules, make sure to
+ pull in mount units via SYSTEMD_WANTS properties.
+
+ * The kdbus support gained support for uploading policy into
+ the kernel. sd-bus gained support for creating "monitoring"
+ connections that can eavesdrop into all bus communication
+ for debugging purposes.
+
+ * Timestamps may now be specified in seconds since the UNIX
+ epoch Jan 1st, 1970 by specifying "@" followed by the value
+ in seconds.
+
+ * Native tcpwrap support in systemd has been removed. tcpwrap
+ is old code, not really maintained anymore and has serious
+ shortcomings, and better options such as firewalls
+ exist. For setups that require tcpwrap usage, please
+ consider invoking your socket-activated service via tcpd,
+ like on traditional inetd.
+
+ * A new system.conf configuration option
+ DefaultTimerAccuracySec= has been added that controls the
+ default AccuracySec= setting of .timer units.
+
+ * Timer units gained a new WakeSystem= switch. If enabled,
+ timers configured this way will cause the system to resume
+ from system suspend (if the system supports that, which most
+ do these days).
+
+ * Timer units gained a new Persistent= switch. If enabled,
+ timers configured this way will save to disk when they have
+ been last triggered. This information is then used on next
+ reboot to possible execute overdue timer events, that
+ could not take place because the system was powered off.
+ This enables simple anacron-like behaviour for timer units.
+
+ * systemctl's "list-timers" will now also list the time a
+ timer unit was last triggered in addition to the next time
+ it will be triggered.
+
+ * systemd-networkd will now assign predictable IPv4LL
+ addresses to its local interfaces.
+
+ Contributions from: Brandon Philips, Daniel Buch, Daniel Mack,
+ Dave Reisner, David Herrmann, Gerd Hoffmann, Greg
+ Kroah-Hartman, Hendrik Brueckner, Jason St. John, Josh
+ Triplett, Kay Sievers, Lennart Poettering, Marc-Antoine
+ Perennou, Michael Marineau, Michael Olbrich, Miklos Vajna,
+ Patrik Flykt, poma, Sebastian Thorarensen, Thomas Bächler,
+ Thomas Hindoe Paaboel Andersen, Tomasz Torcz, Tom Gundersen,
+ Umut Tezduyar Lindskog, Wieland Hoffmann, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Berlin, 2014-03-25
+
+CHANGES WITH 211:
+
+ * A new unit file setting RestrictAddressFamilies= has been
+ added to restrict which socket address families unit
+ processes gain access to. This takes address family names
+ like "AF_INET" or "AF_UNIX", and is useful to minimize the
+ attack surface of services via exotic protocol stacks. This
+ is built on seccomp system call filters.
+
+ * Two new unit file settings RuntimeDirectory= and
+ RuntimeDirectoryMode= have been added that may be used to
+ manage a per-daemon runtime directories below /run. This is
+ an alternative for setting up directory permissions with
+ tmpfiles snippets, and has the advantage that the runtime
+ directory's lifetime is bound to the daemon runtime and that
+ the daemon starts up with an empty directory each time. This
+ is particularly useful when writing services that drop
+ privileges using the User= or Group= setting.
+
+ * The DeviceAllow= unit setting now supports globbing for
+ matching against device group names.
+
+ * The systemd configuration file system.conf gained new
+ settings DefaultCPUAccounting=, DefaultBlockIOAccounting=,
+ DefaultMemoryAccounting= to globally turn on/off accounting
+ for specific resources (cgroups) for all units. These
+ settings may still be overridden individually in each unit
+ though.
+
+ * systemd-gpt-auto-generator is now able to discover /srv and
+ root partitions in addition to /home and swap partitions. It
+ also supports LUKS-encrypted partitions now. With this in
+ place, automatic discovery of partitions to mount following
+ the Discoverable Partitions Specification
+ (http://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec)
+ is now a lot more complete. This allows booting without
+ /etc/fstab and without root= on the kernel command line on
+ systems prepared appropriately.
+
+ * systemd-nspawn gained a new --image= switch which allows
+ booting up disk images and Linux installations on any block
+ device that follow the Discoverable Partitions Specification
+ (see above). This means that installations made with
+ appropriately updated installers may now be started and
+ deployed using container managers, completely
+ unmodified. (We hope that libvirt-lxc will add support for
+ this feature soon, too.)
+
+ * systemd-nspawn gained a new --network-macvlan= setting to
+ set up a private macvlan interface for the
+ container. Similarly, systemd-networkd gained a new
+ Kind=macvlan setting in .netdev files.
+
+ * systemd-networkd now supports configuring local addresses
+ using IPv4LL.
+
+ * A new tool systemd-network-wait-online has been added to
+ synchronously wait for network connectivity using
+ systemd-networkd.
+
+ * The sd-bus.h bus API gained a new sd_bus_track object for
+ tracking the life-cycle of bus peers. Note that sd-bus.h is
+ still not a public API though (unless you specify
+ --enable-kdbus on the configure command line, which however
+ voids your warranty and you get no API stability guarantee).
+
+ * The $XDG_RUNTIME_DIR runtime directories for each user are
+ now individual tmpfs instances, which has the benefit of
+ introducing separate pools for each user, with individual
+ size limits, and thus making sure that unprivileged clients
+ can no longer negatively impact the system or other users by
+ filling up their $XDG_RUNTIME_DIR. A new logind.conf setting
+ RuntimeDirectorySize= has been introduced that allows
+ controlling the default size limit for all users. It
+ defaults to 10% of the available physical memory. This is no
+ replacement for quotas on tmpfs though (which the kernel
+ still does not support), as /dev/shm and /tmp are still
+ shared resources used by both the system and unprivileged
+ users.
+
+ * logind will now automatically turn off automatic suspending
+ on laptop lid close when more than one display is
+ connected. This was previously expected to be implemented
+ individually in desktop environments (such as GNOME),
+ however has been added to logind now, in order to fix a
+ boot-time race where a desktop environment might not have
+ been started yet and thus not been able to take an inhibitor
+ lock at the time where logind already suspends the system
+ due to a closed lid.
+
+ * logind will now wait at least 30s after each system
+ suspend/resume cycle, and 3min after system boot before
+ suspending the system due to a closed laptop lid. This
+ should give USB docking stations and similar enough time to
+ be probed and configured after system resume and boot in
+ order to then act as suspend blocker.
+
+ * systemd-run gained a new --property= setting which allows
+ initialization of resource control properties (and others)
+ for the created scope or service unit. Example: "systemd-run
+ --property=BlockIOWeight=10 updatedb" may be used to run
+ updatedb at a low block IO scheduling weight.
+
+ * systemd-run's --uid=, --gid=, --setenv=, --setenv= switches
+ now also work in --scope mode.
+
+ * When systemd is compiled with kdbus support, basic support
+ for enforced policies is now in place. (Note that enabling
+ kdbus still voids your warranty and no API compatibility
+ promises are made.)
+
+ Contributions from: Andrey Borzenkov, Ansgar Burchardt, Armin
+ K., Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
+ Harald Hoyer, Henrik Grindal Bakken, Jasper St. Pierre, Kay
+ Sievers, Kieran Clancy, Lennart Poettering, Lukas Nykryn,
+ Mantas Mikulėnas, Marcel Holtmann, Mark Oteiza, Martin Pitt,
+ Mike Gilbert, Peter Rajnoha, poma, Samuli Suominen, Stef
+ Walter, Susant Sahani, Tero Roponen, Thomas Andersen, Thomas
+ Bächler, Thomas Hindoe Paaboel Andersen, Tomasz Torcz, Tom
+ Gundersen, Umut Tezduyar Lindskog, Uoti Urpala, Zachary Cook,
+ Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-03-12
+
+CHANGES WITH 210:
+
+ * systemd will now relabel /dev after loading the SMACK policy
+ according to SMACK rules.
+
+ * A new unit file option AppArmorProfile= has been added to
+ set the AppArmor profile for the processes of a unit.
+
+ * A new condition check ConditionArchitecture= has been added
+ to conditionalize units based on the system architecture, as
+ reported by uname()'s "machine" field.
+
+ * systemd-networkd now supports matching on the system
+ virtualization, architecture, kernel command line, host name
+ and machine ID.
+
+ * logind is now a lot more aggressive when suspending the
+ machine due to a closed laptop lid. Instead of acting only
+ on the lid close action, it will continuously watch the lid
+ status and act on it. This is useful for laptops where the
+ power button is on the outside of the chassis so that it can
+ be reached without opening the lid (such as the Lenovo
+ Yoga). On those machines, logind will now immediately
+ re-suspend the machine if the power button has been
+ accidentally pressed while the laptop was suspended and in a
+ backpack or similar.
+
+ * logind will now watch SW_DOCK switches and inhibit reaction
+ to the lid switch if it is pressed. This means that logind
+ will not suspend the machine anymore if the lid is closed
+ and the system is docked, if the laptop supports SW_DOCK
+ notifications via the input layer. Note that ACPI docking
+ stations do not generate this currently. Also note that this
+ logic is usually not fully sufficient and Desktop
+ Environments should take a lid switch inhibitor lock when an
+ external display is connected, as systemd will not watch
+ this on its own.
+
+ * nspawn will now make use of the devices cgroup controller by
+ default, and only permit creation of and access to the usual
+ API device nodes like /dev/null or /dev/random, as well as
+ access to (but not creation of) the pty devices.
+
+ * We will now ship a default .network file for
+ systemd-networkd that automatically configures DHCP for
+ network interfaces created by nspawn's --network-veth or
+ --network-bridge= switches.
+
+ * systemd will now understand the usual M, K, G, T suffixes
+ according to SI conventions (i.e. to the base 1000) when
+ referring to throughput and hardware metrics. It will stay
+ with IEC conventions (i.e. to the base 1024) for software
+ metrics, according to what is customary according to
+ Wikipedia. We explicitly document which base applies for
+ each configuration option.
+
+ * The DeviceAllow= setting in unit files now supports a syntax
+ to whitelist an entire group of devices node majors at once,
+ based on the /proc/devices listing. For example, with the
+ string "char-pts", it is now possible to whitelist all
+ current and future pseudo-TTYs at once.
+
+ * sd-event learned a new "post" event source. Event sources of
+ this type are triggered by the dispatching of any event
+ source of a type that is not "post". This is useful for
+ implementing clean-up and check event sources that are
+ triggered by other work being done in the program.
+
+ * systemd-networkd is no longer statically enabled, but uses
+ the usual [Install] sections so that it can be
+ enabled/disabled using systemctl. It still is enabled by
+ default however.
+
+ * When creating a veth interface pair with systemd-nspawn, the
+ host side will now be prefixed with "vb-" if
+ --network-bridge= is used, and with "ve-" if --network-veth
+ is used. This way, it is easy to distinguish these cases on
+ the host, for example to apply different configuration to
+ them with systemd-networkd.
+
+ * The compatibility libraries for libsystemd-journal.so,
+ libsystem-id128.so, libsystemd-login.so and
+ libsystemd-daemon.so do not make use of IFUNC
+ anymore. Instead, we now build libsystemd.so multiple times
+ under these alternative names. This means that the footprint
+ is drastically increased, but given that these are
+ transitional compatibility libraries, this should not matter
+ much. This change has been made necessary to support the ARM
+ platform for these compatibility libraries, as the ARM
+ toolchain is not really at the same level as the toolchain
+ for other architectures like x86 and does not support
+ IFUNC. Please make sure to use --enable-compat-libs only
+ during a transitional period!
+
+ Contributions from: Andreas Fuchs, Armin K., Colin Walters,
+ Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
+ Holger Schurig, Jason A. Donenfeld, Jason St. John, Jasper
+ St. Pierre, Kay Sievers, Lennart Poettering, Łukasz Stelmach,
+ Marcel Holtmann, Michael Scherer, Michal Sekletar, Mike
+ Gilbert, Samuli Suominen, Thomas Bächler, Thomas Hindoe
+ Paaboel Andersen, Tom Gundersen, Umut Tezduyar Lindskog,
+ Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-02-24
+
+CHANGES WITH 209:
+
+ * A new component "systemd-networkd" has been added that can
+ be used to configure local network interfaces statically or
+ via DHCP. It is capable of bringing up bridges, VLANs, and
+ bonding. Currently, no hook-ups for interactive network
+ configuration are provided. Use this for your initrd,
+ container, embedded, or server setup if you need a simple,
+ yet powerful, network configuration solution. This
+ configuration subsystem is quite nifty, as it allows wildcard
+ hotplug matching in interfaces. For example, with a single
+ configuration snippet, you can configure that all Ethernet
+ interfaces showing up are automatically added to a bridge,
+ or similar. It supports link-sensing and more.
+
+ * A new tool "systemd-socket-proxyd" has been added which can
+ act as a bidirectional proxy for TCP sockets. This is
+ useful for adding socket activation support to services that
+ do not actually support socket activation, including virtual
+ machines and the like.
+
+ * Add a new tool to save/restore rfkill state on
+ shutdown/boot.
+
+ * Save/restore state of keyboard backlights in addition to
+ display backlights on shutdown/boot.
+
+ * udev learned a new SECLABEL{} construct to label device
+ nodes with a specific security label when they appear. For
+ now, only SECLABEL{selinux} is supported, but the syntax is
+ prepared for additional security frameworks.
+
+ * udev gained a new scheme to configure link-level attributes
+ from files in /etc/systemd/network/*.link. These files can
+ match against MAC address, device path, driver name and type,
+ and will apply attributes like the naming policy, link speed,
+ MTU, duplex settings, Wake-on-LAN settings, MAC address, MAC
+ address assignment policy (randomized, ...).
+
+ * The configuration of network interface naming rules for
+ "permanent interface names" has changed: a new NamePolicy=
+ setting in the [Link] section of .link files determines the
+ priority of possible naming schemes (onboard, slot, mac,
+ path). The default value of this setting is determined by
+ /usr/lib/net/links/99-default.link. Old
+ 80-net-name-slot.rules udev configuration file has been
+ removed, so local configuration overriding this file should
+ be adapated to override 99-default.link instead.
+
+ * When the User= switch is used in a unit file, also
+ initialize $SHELL= based on the user database entry.
+
+ * systemd no longer depends on libdbus. All communication is
+ now done with sd-bus, systemd's low-level bus library
+ implementation.
+
+ * kdbus support has been added to PID 1 itself. When kdbus is
+ enabled, this causes PID 1 to set up the system bus and
+ enable support for a new ".busname" unit type that
+ encapsulates bus name activation on kdbus. It works a little
+ bit like ".socket" units, except for bus names. A new
+ generator has been added that converts classic dbus1 service
+ activation files automatically into native systemd .busname
+ and .service units.
+
+ * sd-bus: add a light-weight vtable implementation that allows
+ defining objects on the bus with a simple static const
+ vtable array of its methods, signals and properties.
+
+ * systemd will not generate or install static dbus
+ introspection data anymore to /usr/share/dbus-1/interfaces,
+ as the precise format of these files is unclear, and
+ nothing makes use of it.
+
+ * A proxy daemon is now provided to proxy clients connecting
+ via classic D-Bus AF_UNIX sockets to kdbus, to provide full
+ compatibility with classic D-Bus.
+
+ * A bus driver implementation has been added that supports the
+ classic D-Bus bus driver calls on kdbus, also for
+ compatibility purposes.
+
+ * A new API "sd-event.h" has been added that implements a
+ minimal event loop API built around epoll. It provides a
+ couple of features that direct epoll usage is lacking:
+ prioritization of events, scales to large numbers of timer
+ events, per-event timer slack (accuracy), system-wide
+ coalescing of timer events, exit handlers, watchdog
+ supervision support using systemd's sd_notify() API, child
+ process handling.
+
+ * A new API "sd-rntl.h" has been added that provides an API
+ around the route netlink interface of the kernel, similar in
+ style to "sd-bus.h".
+
+ * A new API "sd-dhcp-client.h" has been added that provides a
+ small DHCPv4 client-side implementation. This is used by
+ "systemd-networkd".
+
+ * There is a new kernel command line option
+ "systemd.restore_state=0|1". When set to "0", none of the
+ systemd tools will restore saved runtime state to hardware
+ devices. More specifically, the rfkill and backlight states
+ are not restored.
+
+ * The FsckPassNo= compatibility option in mount/service units
+ has been removed. The fstab generator will now add the
+ necessary dependencies automatically, and does not require
+ PID1's support for that anymore.
+
+ * journalctl gained a new switch, --list-boots, that lists
+ recent boots with their times and boot IDs.
+
+ * The various tools like systemctl, loginctl, timedatectl,
+ busctl, systemd-run, ... have gained a new switch "-M" to
+ connect to a specific, local OS container (as direct
+ connection, without requiring SSH). This works on any
+ container that is registered with machined, such as those
+ created by libvirt-lxc or nspawn.
+
+ * systemd-run and systemd-analyze also gained support for "-H"
+ to connect to remote hosts via SSH. This is particularly
+ useful for systemd-run because it enables queuing of jobs
+ onto remote systems.
+
+ * machinectl gained a new command "login" to open a getty
+ login in any local container. This works with any container
+ that is registered with machined (such as those created by
+ libvirt-lxc or nspawn), and which runs systemd inside.
+
+ * machinectl gained a new "reboot" command that may be used to
+ trigger a reboot on a specific container that is registered
+ with machined. This works on any container that runs an init
+ system of some kind.
+
+ * systemctl gained a new "list-timers" command to print a nice
+ listing of installed timer units with the times they elapse
+ next.
+
+ * Alternative reboot() parameters may now be specified on the
+ "systemctl reboot" command line and are passed to the
+ reboot() system call.
+
+ * systemctl gained a new --job-mode= switch to configure the
+ mode to queue a job with. This is a more generic version of
+ --fail, --irreversible, and --ignore-dependencies, which are
+ still available but not advertised anymore.
+
+ * /etc/systemd/system.conf gained new settings to configure
+ various default timeouts of units, as well as the default
+ start limit interval and burst. These may still be overridden
+ within each Unit.
+
+ * PID1 will now export on the bus profile data of the security
+ policy upload process (such as the SELinux policy upload to
+ the kernel).
+
+ * journald: when forwarding logs to the console, include
+ timestamps (following the setting in
+ /sys/module/printk/parameters/time).
+
+ * OnCalendar= in timer units now understands the special
+ strings "yearly" and "annually". (Both are equivalent)
+
+ * The accuracy of timer units is now configurable with the new
+ AccuracySec= setting. It defaults to 1min.
+
+ * A new dependency type JoinsNamespaceOf= has been added that
+ allows running two services within the same /tmp and network
+ namespace, if PrivateNetwork= or PrivateTmp= are used.
+
+ * A new command "cat" has been added to systemctl. It outputs
+ the original unit file of a unit, and concatenates the
+ contents of additional "drop-in" unit file snippets, so that
+ the full configuration is shown.
+
+ * systemctl now supports globbing on the various "list-xyz"
+ commands, like "list-units" or "list-sockets", as well as on
+ those commands which take multiple unit names.
+
+ * journalctl's --unit= switch gained support for globbing.
+
+ * All systemd daemons now make use of the watchdog logic so
+ that systemd automatically notices when they hang.
+
+ * If the $container_ttys environment variable is set,
+ getty-generator will automatically spawn a getty for each
+ listed tty. This is useful for container managers to request
+ login gettys to be spawned on as many ttys as needed.
+
+ * %h, %s, %U specifier support is not available anymore when
+ used in unit files for PID 1. This is because NSS calls are
+ not safe from PID 1. They stay available for --user
+ instances of systemd, and as special case for the root user.
+
+ * loginctl gained a new "--no-legend" switch to turn off output
+ of the legend text.
+
+ * The "sd-login.h" API gained three new calls:
+ sd_session_is_remote(), sd_session_get_remote_user(),
+ sd_session_get_remote_host() to query information about
+ remote sessions.
+
+ * The udev hardware database now also carries vendor/product
+ information of SDIO devices.
+
+ * The "sd-daemon.h" API gained a new sd_watchdog_enabled() to
+ determine whether watchdog notifications are requested by
+ the system manager.
+
+ * Socket-activated per-connection services now include a
+ short description of the connection parameters in the
+ description.
+
+ * tmpfiles gained a new "--boot" option. When this is not used,
+ only lines where the command character is not suffixed with
+ "!" are executed. When this option is specified, those
+ options are executed too. This partitions tmpfiles
+ directives into those that can be safely executed at any
+ time, and those which should be run only at boot (for
+ example, a line that creates /run/nologin).
+
+ * A new API "sd-resolve.h" has been added which provides a simple
+ asynchronous wrapper around glibc NSS host name resolution
+ calls, such as getaddrinfo(). In contrast to glibc's
+ getaddrinfo_a(), it does not use signals. In contrast to most
+ other asynchronous name resolution libraries, this one does
+ not reimplement DNS, but reuses NSS, so that alternate
+ host name resolution systems continue to work, such as mDNS,
+ LDAP, etc. This API is based on libasyncns, but it has been
+ cleaned up for inclusion in systemd.
+
+ * The APIs "sd-journal.h", "sd-login.h", "sd-id128.h",
+ "sd-daemon.h" are no longer found in individual libraries
+ libsystemd-journal.so, libsystemd-login.so,
+ libsystemd-id128.so, libsystemd-daemon.so. Instead, we have
+ merged them into a single library, libsystemd.so, which
+ provides all symbols. The reason for this is cyclic
+ dependencies, as these libraries tend to use each other's
+ symbols. So far, we have managed to workaround that by linking
+ a copy of a good part of our code into each of these
+ libraries again and again, which, however, makes certain
+ things hard to do, like sharing static variables. Also, it
+ substantially increases footprint. With this change, there
+ is only one library for the basic APIs systemd
+ provides. Also, "sd-bus.h", "sd-memfd.h", "sd-event.h",
+ "sd-rtnl.h", "sd-resolve.h", "sd-utf8.h" are found in this
+ library as well, however are subject to the --enable-kdbus
+ switch (see below). Note that "sd-dhcp-client.h" is not part
+ of this library (this is because it only consumes, never
+ provides, services of/to other APIs). To make the transition
+ easy from the separate libraries to the unified one, we
+ provide the --enable-compat-libs compile-time switch which
+ will generate stub libraries that are compatible with the
+ old ones but redirect all calls to the new one.
+
+ * All of the kdbus logic and the new APIs "sd-bus.h",
+ "sd-memfd.h", "sd-event.h", "sd-rtnl.h", "sd-resolve.h",
+ and "sd-utf8.h" are compile-time optional via the
+ "--enable-kdbus" switch, and they are not compiled in by
+ default. To make use of kdbus, you have to explicitly enable
+ the switch. Note however, that neither the kernel nor the
+ userspace API for all of this is considered stable yet. We
+ want to maintain the freedom to still change the APIs for
+ now. By specifying this build-time switch, you acknowledge
+ that you are aware of the instability of the current
+ APIs.
+
+ * Also, note that while kdbus is pretty much complete,
+ it lacks one thing: proper policy support. This means you
+ can build a fully working system with all features; however,
+ it will be highly insecure. Policy support will be added in
+ one of the next releases, at the same time that we will
+ declare the APIs stable.
+
+ * When the kernel command line argument "kdbus" is specified,
+ systemd will automatically load the kdbus.ko kernel module. At
+ this stage of development, it is only useful for testing kdbus
+ and should not be used in production. Note: if "--enable-kdbus"
+ is specified, and the kdbus.ko kernel module is available, and
+ "kdbus" is added to the kernel command line, the entire system
+ runs with kdbus instead of dbus-daemon, with the above mentioned
+ problem of missing the system policy enforcement. Also a future
+ version of kdbus.ko or a newer systemd will not be compatible with
+ each other, and will unlikely be able to boot the machine if only
+ one of them is updated.
+
+ * systemctl gained a new "import-environment" command which
+ uploads the caller's environment (or parts thereof) into the
+ service manager so that it is inherited by services started
+ by the manager. This is useful to upload variables like
+ $DISPLAY into the user service manager.
+
+ * A new PrivateDevices= switch has been added to service units
+ which allows running a service with a namespaced /dev
+ directory that does not contain any device nodes for
+ physical devices. More specifically, it only includes devices
+ such as /dev/null, /dev/urandom, and /dev/zero which are API
+ entry points.
+
+ * logind has been extended to support behaviour like VT
+ switching on seats that do not support a VT. This makes
+ multi-session available on seats that are not the first seat
+ (seat0), and on systems where kernel support for VTs has
+ been disabled at compile-time.
+
+ * If a process holds a delay lock for system sleep or shutdown
+ and fails to release it in time, we will now log its
+ identity. This makes it easier to identify processes that
+ cause slow suspends or power-offs.
+
+ * When parsing /etc/crypttab, support for a new key-slot=
+ option as supported by Debian is added. It allows indicating
+ which LUKS slot to use on disk, speeding up key loading.
+
+ * The sd_journald_sendv() API call has been checked and
+ officially declared to be async-signal-safe so that it may
+ be invoked from signal handlers for logging purposes.
+
+ * Boot-time status output is now enabled automatically after a
+ short timeout if boot does not progress, in order to give
+ the user an indication what she or he is waiting for.
+
+ * The boot-time output has been improved to show how much time
+ remains until jobs expire.
+
+ * The KillMode= switch in service units gained a new possible
+ value "mixed". If set, and the unit is shut down, then the
+ initial SIGTERM signal is sent only to the main daemon
+ process, while the following SIGKILL signal is sent to
+ all remaining processes of the service.
+
+ * When a scope unit is registered, a new property "Controller"
+ may be set. If set to a valid bus name, systemd will send a
+ RequestStop() signal to this name when it would like to shut
+ down the scope. This may be used to hook manager logic into
+ the shutdown logic of scope units. Also, scope units may now
+ be put in a special "abandoned" state, in which case the
+ manager process which created them takes no further
+ responsibilities for it.
+
+ * When reading unit files, systemd will now verify
+ the access mode of these files, and warn about certain
+ suspicious combinations. This has been added to make it
+ easier to track down packaging bugs where unit files are
+ marked executable or world-writable.
+
+ * systemd-nspawn gained a new "--setenv=" switch to set
+ container-wide environment variables. The similar option in
+ systemd-activate was renamed from "--environment=" to
+ "--setenv=" for consistency.
+
+ * systemd-nspawn has been updated to create a new kdbus domain
+ for each container that is invoked, thus allowing each
+ container to have its own set of system and user buses,
+ independent of the host.
+
+ * systemd-nspawn gained a new --drop-capability= switch to run
+ the container with less capabilities than the default. Both
+ --drop-capability= and --capability= now take the special
+ string "all" for dropping or keeping all capabilities.
+
+ * systemd-nspawn gained new switches for executing containers
+ with specific SELinux labels set.
+
+ * systemd-nspawn gained a new --quiet switch to not generate
+ any additional output but the container's own console
+ output.
+
+ * systemd-nspawn gained a new --share-system switch to run a
+ container without PID namespacing enabled.
+
+ * systemd-nspawn gained a new --register= switch to control
+ whether the container is registered with systemd-machined or
+ not. This is useful for containers that do not run full
+ OS images, but only specific apps.
+
+ * systemd-nspawn gained a new --keep-unit which may be used
+ when invoked as the only program from a service unit, and
+ results in registration of the unit service itself in
+ systemd-machined, instead of a newly opened scope unit.
+
+ * systemd-nspawn gained a new --network-interface= switch for
+ moving arbitrary interfaces to the container. The new
+ --network-veth switch creates a virtual Ethernet connection
+ between host and container. The new --network-bridge=
+ switch then allows assigning the host side of this virtual
+ Ethernet connection to a bridge device.
+
+ * systemd-nspawn gained a new --personality= switch for
+ setting the kernel personality for the container. This is
+ useful when running a 32-bit container on a 64-bit host. A
+ similar option Personality= is now also available for service
+ units to use.
+
+ * logind will now also track a "Desktop" identifier for each
+ session which encodes the desktop environment of it. This is
+ useful for desktop environments that want to identify
+ multiple running sessions of itself easily.
+
+ * A new SELinuxContext= setting for service units has been
+ added that allows setting a specific SELinux execution
+ context for a service.
+
+ * Most systemd client tools will now honour $SYSTEMD_LESS for
+ settings of the "less" pager. By default, these tools will
+ override $LESS to allow certain operations to work, such as
+ jump-to-the-end. With $SYSTEMD_LESS, it is possible to
+ influence this logic.
+
+ * systemd's "seccomp" hook-up has been changed to make use of
+ the libseccomp library instead of using its own
+ implementation. This has benefits for portability among
+ other things.
+
+ * For usage together with SystemCallFilter=, a new
+ SystemCallErrorNumber= setting has been introduced that
+ allows configuration of a system error number to be returned
+ on filtered system calls, instead of immediately killing the
+ process. Also, SystemCallArchitectures= has been added to
+ limit access to system calls of a particular architecture
+ (in order to turn off support for unused secondary
+ architectures). There is also a global
+ SystemCallArchitectures= setting in system.conf now to turn
+ off support for non-native system calls system-wide.
+
+ * systemd requires a kernel with a working name_to_handle_at(),
+ please see the kernel config requirements in the README file.
+
+ Contributions from: Adam Williamson, Alex Jia, Anatol Pomozov,
+ Ansgar Burchardt, AppleBloom, Auke Kok, Bastien Nocera,
+ Chengwei Yang, Christian Seiler, Colin Guthrie, Colin Walters,
+ Cristian Rodríguez, Daniel Buch, Daniele Medri, Daniel J
+ Walsh, Daniel Mack, Dan McGee, Dave Reisner, David Coppa,
+ David Herrmann, David Strauss, Djalal Harouni, Dmitry Pisklov,
+ Elia Pinto, Florian Weimer, George McCollister, Goffredo
+ Baroncelli, Greg Kroah-Hartman, Hendrik Brueckner, Igor
+ Zhbanov, Jan Engelhardt, Jan Janssen, Jason A. Donenfeld,
+ Jason St. John, Jasper St. Pierre, Jóhann B. Guðmundsson, Jose
+ Ignacio Naranjo, Karel Zak, Kay Sievers, Kristian Høgsberg,
+ Lennart Poettering, Lubomir Rintel, Lukas Nykryn, Lukasz
+ Skalski, Łukasz Stelmach, Luke Shumaker, Mantas Mikulėnas,
+ Marc-Antoine Perennou, Marcel Holtmann, Marcos Felipe Rasia de
+ Mello, Marko Myllynen, Martin Pitt, Matthew Monaco, Michael
+ Marineau, Michael Scherer, Michał Górny, Michal Sekletar,
+ Michele Curti, Oleksii Shevchuk, Olivier Brunel, Patrik Flykt,
+ Pavel Holica, Raudi, Richard Marko, Ronny Chevalier, Sébastien
+ Luttringer, Sergey Ptashnick, Shawn Landden, Simon Peeters,
+ Stefan Beller, Susant Sahani, Sylvain Plantefeve, Sylvia Else,
+ Tero Roponen, Thomas Bächler, Thomas Hindoe Paaboel Andersen,
+ Tom Gundersen, Umut Tezduyar Lindskog, Unai Uribarri, Václav
+ Pavlín, Vincent Batts, WaLyong Cho, William Giokas, Yang
+ Zhiyong, Yin Kangkai, Yuxuan Shui, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-02-20
+