round_edge_rad = 2.0;
+round_cnr_rad = 10;
+
interlock_dia = 10;
interlock_fine = 0.66;
// calculated
+TEST = false;
+
ply_edge_hole_dist = ply_edge_min + ply_hole_dia/2;
echo(str("HOLES IN PLY ctr dist from PLY edge = ", ply_edge_hole_dist));
cylinder(r= screw_dia/2, h= ply_th, $fn=20);
}
}
+ if (TEST) {
+ tsz = tile_hard_edge_hole_dist - test_edge + 1;
+ translate([0,0, tile_th/2]) {
+ cube([post_dia, tsz*2, tile_th], center=true);
+ cube([tsz*2, post_dia, tile_th], center=true);
+ }
+ }
}
}
mirror([0,0,1])
translate(concat(botleft, [0]))
cube(concat(size, [tile_th]));
- translate( concat(botleft_post, [-tile_th])
- + 0.5 * [ post_dia, post_dia, 0 ] )
- Commitid_BestCount_M( topright_post-botleft_post
- + [-post_dia,-post_dia]
- + [0, thehd[1]]);
+ if (!TEST) {
+ translate( concat(botleft_post, [ -tile_th ])
+ + 0.5 * [ post_dia, post_dia, 0 ] )
+ Commitid_BestCount_M( topright_post-botleft_post
+ + [-post_dia,-post_dia]
+ + [0, thehd[1]]);
+ }
+ if (TEST) {
+ translate( concat(botleft + [thehd[0], 0], [0]) )
+ Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
+ mirror([0,0,1]) {
+ translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
+ cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+ translate(concat(botleft_post, [-1]))
+ cube(concat(topright_post-botleft_post, [tile_th+2]));
+ }
+ }
}
}
}
}
-module RoundLeftCorner(this_cnr, right_cnr) {
+module RoundCornerCut(ci) {
+ this_cnr = ci[0];
+ right_cnr = ci[1];
+ offr= round_cnr_rad - round_edge_rad;
INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
difference(){
- sphere(r= round_edge_rad, $fn=60);
- translate([0,0, -20])
- cube([20,20,20]);
+ cube(offr*2 - 0.1, center=true);
+ translate([offr, offr, 0])
+ cylinder(center=true, h=20, r= offr);
+ }
+ }
+}
+
+module RoundCornerAdd(ci) {
+ this_cnr = ci[0];
+ right_cnr = ci[1];
+ bigr = round_cnr_rad - round_edge_rad;
+ INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
+ intersection(){
+ cube(bigr*2 + 0.1, center=true);
+ translate([bigr, bigr, 0])
+ rotate_extrude(convexity=10, $fn=50)
+ translate([bigr, 0])
+ difference(){
+ circle(r= round_edge_rad, $fn=50);
+ mirror([1,1])
+ square([20,20]);
+ }
}
}
}
}
if (dosquare) {
- iadj = interlock_sq_adj;
- slotshorter = negative ? 0 : interlock_fine_lenslop;
+ iadj = 0;
+ slotshorter = negative ? -0.1 : interlock_fine_lenslop;
mirror([0, negative])
translate([slotshorter, iadj])
square([length - slotshorter*2, interlock_fine + iadj*2]);
z1 = -tile_th/2 - protr / interlock_fine_slope;
z3 = -tile_th/2 + protr / interlock_fine_slope;
- yprotr = negative ? -protr : protr;
+ negsign = negative ? -1 : +1;
+ yprotr = negsign * protr;
INREFFRAME(left_cnr, right_cnr) {
for (vsect = [ // zs0 zs1 ys0, ys1
ysd = ys1-ys0;
sl = ysd/zsd;
m = [ [ 1,0, 0, 0 ],
- [ 0,1, -sl, -ys0 ],
+ [ 0,1, -sl, -ys0 + negsign*interlock_sq_adj ],
[ 0,0, 1, zs0 ],
[ 0,0, 0, 1 ] ];
multmatrix(m)
linear_extrude(height=zsd, convexity=10)
- InterlockEdgePlan(negative, nlobes, length);
+ InterlockEdgePlan(negative, nlobes, length, !!ysd);
}
}
}
[ 0, 0]
];
corners = TestPiece_holes2corners(holes);
+ rcs = [corners[0], corners[1]];
difference(){
- TileBase(corners[0], corners[2]);
+ union(){
+ TileBase(corners[0], corners[2]);
+ Posts(holes);
+ RoundEdge(corners[0], corners[1]);
+ RoundEdge(corners[3], corners[0]);
+ }
InterlockEdge(corners[1], corners[2], 1, nlobes=1);
+ RoundCornerCut(rcs);
}
- Posts(holes);
- RoundEdge(corners[0], corners[1]);
- RoundEdge(corners[3], corners[0]);
- RoundLeftCorner(corners[0], corners[1]);
+ RoundCornerAdd(rcs);
}
module TestPiece2(){ ////toplevel
c0 = -sz;
c = Rectangle_corners(c0, sz);
posts = Rectangle_corners2posts(c);
+ rcs = [c[0], c[1]];
difference(){
- TileBase(c[0], c[2]);
+ union(){
+ TileBase(c[0], c[2]);
+ Posts(posts);
+ RoundEdge(c[0], c[1]);
+ RoundEdge(c[3], c[0]);
+ InterlockEdge(c[2], c[3], 0);
+ }
InterlockEdge(c[1], c[2], 1);
+ RoundCornerCut(rcs);
}
- Posts(posts);
- RoundEdge(c[0], c[1]);
- RoundEdge(c[3], c[0]);
- RoundLeftCorner(c[0], c[1]);
- InterlockEdge(c[2], c[3], 0);
+ RoundCornerAdd(rcs);
}
module Tile12(){ ////toplevel
c0 = [-sz[0], 0];
c = Rectangle_corners(c0, sz);
posts = Rectangle_corners2posts(c);
+ rcs = [c[2], c[3]];
difference(){
- TileBase(c[0], c[2]);
+ union(){
+ TileBase(c[0], c[2]);
+ RoundEdge(c[2], c[3]);
+ RoundEdge(c[3], c[0]);
+ Posts(posts);
+ }
InterlockEdge(c[0], c[1], 1);
+ RoundCornerCut(rcs);
}
- Posts(posts);
- RoundEdge(c[2], c[3]);
- RoundEdge(c[3], c[0]);
- RoundLeftCorner(c[2], c[3]);
+ RoundCornerAdd(rcs);
}
module Demo(){ ////toplevel