// -*- C -*-
// todo
-// attachment point move up so clears when inserted
-// onejig must be deep enough for strap plus motion plus holder
-// even deeper for side rails
-// what about existing slot locator ? maybe not
+// various registration marks
+// protrustions at ends at strap width and middle
+// grooves on top face at 1/4,1/2,3/4 length and 1/2 width
+strap_thick = 3;
+strap_width = 26.75 + 0.7;
+
+jig_interval = 25;
+
+edgewall_width = 3;
crewpunch_slop = 0.3;
+main_slop = 0.25;
holder_min_wall = 2;
+holder_attach_near_wall = 5;
holder_attach_xsz = 5;
holder_ctie_width = 4.0 + 0.5;
-holder_ctie_thick = 2.0 + 0.5;
+holder_ctie_thick = 3.0 + 0.5;
holder_attach_walls = 3;
holder_attach_roof = 2.5;
-jig_interval = 25;
-strap_width = 25;
-edgewall_width = 3;
+holder_corner_round = 2.0;
-main_slop = 0.5;
+punch_travel = 8;
// from careful measurement
[ 10, [1.6, 6.5], [2.1, 12.8] ],
[ 12, [1.8, 6.6], [2.3, 12.7] ],
[ 14, [2.1, 6.8], [2.6, 13.0] ],
- [ 16, [2.4, 6.9], [2.7, 13.2] ]];
+ [ 16, [2.4, 6.9], [2.7, 13.2] ],
+ [ 18, [2.5, 7.0], [2.9, 13.3] ],
+ [ 22, [3.1, 7.1], [3.2, 13.4] ],
+ [ 26, [3.3, 7.2], [3.5, 13.6] ],
+ ];
crewpunch_shaft_max_y = 7.5;
crewpunch_systematic_size_error = +0.36;
-crewpunch_min_y = 4.7 - crewpunch_systematic_size_error;
-
crewpunch_smallest_shape = crewpunch_shape[0];
crewpunch_biggest_shape = crewpunch_shape[len(crewpunch_shape)-1];
+crewpunch_skew_angle = 3.5; //degrees
+crewpunch_skew_yoff = +1.1; //mm
+
// computed
+punch_dx = 0.5 * (-crewpunch_biggest_shape[2][0]
+ +crewpunch_biggest_shape[2][1]);
+punch_dy = 0.5 * (+crewpunch_biggest_shape[1][1]
+ -crewpunch_biggest_shape[1][0]) + crewpunch_skew_yoff;
+
attach_ysz = holder_attach_walls*2 + holder_ctie_width;
-holder_front_wall = crewpunch_shaft_max_y - crewpunch_biggest_shape[1][1]
- + attach_ysz;
holder_block_zsz = crewpunch_biggest_shape[0] - crewpunch_smallest_shape[0];
holder_xsz = crewpunch_biggest_shape[2][0] + crewpunch_biggest_shape[2][1] +
holder_min_wall*2;
-crewpunch_biggest_y =
- crewpunch_biggest_shape[1][0] + crewpunch_biggest_shape[1][1];
-holder_ysz = crewpunch_biggest_y + holder_min_wall + holder_front_wall;
-attach_offset = holder_attach_xsz + holder_min_wall;
+holder_skewangle_yextra = holder_xsz/2 * sin(abs(crewpunch_skew_angle));
+
+holder_max_y = punch_dy + crewpunch_biggest_shape[1][0] + holder_min_wall
+ + crewpunch_systematic_size_error + holder_skewangle_yextra;
+
+holder_attach_max_y = punch_dy
+ - max(crewpunch_biggest_shape[1][1], crewpunch_shaft_max_y)
+ - crewpunch_systematic_size_error - holder_skewangle_yextra;
+
+holder_block_min_y = punch_dy
+ - crewpunch_biggest_shape[1][1] - holder_attach_near_wall +
+ - crewpunch_systematic_size_error - holder_skewangle_yextra;
+
+holder_all_min_y = holder_attach_max_y - attach_ysz;
+
+jig_max_y = max(holder_max_y + main_slop, strap_width/2) + edgewall_width;
+jig_min_y = min(holder_all_min_y - main_slop, -strap_width/2) - edgewall_width;
+
+jig_main_zsz = holder_block_zsz + punch_travel;
+
+// common stuff
+
+include <belt-cut-jig-common.scad>
// objects
mirror([xind?1:0,0,0]) mirror([0,yind?0:1,0]){
translate([-0.1,-0.1,-0.1])
cube([0.1 + layer[2][xind] + ourslop,
- 0.1 + layer[1][yind] + ourslop,
+ 0.1 + layer[1][1-yind] + ourslop,
0.2]);
}
}
}
}
+module MaybeRoundedCube(sizes, roundedness){
+ if (roundedness > 0) {
+ translate([roundedness, roundedness, 0]){
+ minkowski(){
+ cube([sizes[0] - roundedness*2,
+ sizes[1] - roundedness*2,
+ sizes[2]]);
+ cylinder(h=0.05, r=roundedness, $fn=20);
+ }
+ }
+ } else {
+ cube(sizes);
+ }
+}
+
module PunchHolder(cutouts=true){
- translate([-holder_xsz/2,
- -holder_ysz + holder_min_wall + crewpunch_biggest_y/2,
- 0]){
+ roundedness = cutouts ? holder_corner_round : 0;
difference(){
- translate([0,attach_offset,0])
- cube([holder_xsz, holder_ysz - attach_offset, holder_block_zsz]);
+ translate([-holder_xsz/2, holder_block_min_y, 0])
+ MaybeRoundedCube([holder_xsz,
+ holder_max_y - holder_block_min_y,
+ holder_block_zsz],
+ roundedness);
if (cutouts)
- translate([crewpunch_biggest_shape[2][1] + holder_min_wall,
- crewpunch_biggest_shape[1][0] + holder_front_wall,
+ rotate([0,0,-crewpunch_skew_angle])
+ translate([punch_dx,
+ punch_dy,
-crewpunch_smallest_shape[0]])
CrewPunch();
}
difference(){
- translate([holder_xsz/2 - holder_attach_xsz/2, 0, 0])
- cube([holder_attach_xsz,
- attach_ysz,
- holder_block_zsz + holder_ctie_thick + holder_attach_roof + 1]);
+ translate([-holder_attach_xsz/2, holder_all_min_y, 0])
+ MaybeRoundedCube([holder_attach_xsz,
+ attach_ysz,
+ holder_block_zsz + punch_travel
+ + holder_ctie_thick + holder_attach_roof + 1],
+ roundedness);
if (cutouts)
- translate([-30, holder_attach_walls, holder_block_zsz + 0.1])
+ translate([-30,
+ holder_all_min_y + holder_attach_walls,
+ holder_block_zsz + punch_travel])
cube([60, holder_ctie_width, holder_ctie_thick]);
}
+}
+
+module OneJigCutout(){
+ minkowski(){
+ cube([main_slop*2, main_slop*2, 50], center=true);
+ PunchHolder(false);
}
}
-module OneJig(){
- difference(){
- translate([-(jig_interval/2 + 1),
- -(strap_width/2 + edgewall_width) - attach_offset,
+module JigT(){ ////toplevel
+ JigPrint();
+}
+
+module PunchHolderT(){ ////toplevel
+ PunchHolder(true);
+}
+
+module Demo(){ ////toplevel
+ %PunchHolder();
+ Jig();
+}
+
+module Kit(){ ////toplevel
+ JigT();
+ rotate([0,0,-45]){
+ translate([(jig_iters-1)*jig_interval/2,
+ jig_min_y - holder_max_y - 5,
0])
- cube([jig_interval + 2,
- strap_width + edgewall_width*2 + attach_offset,
- holder_ysz]);
- minkowski(){
- cube([main_slop*2, main_slop*2, 50], center=true);
- PunchHolder(false);
- }
+ PunchHolder();
}
}
-
+
//CrewPunch();
-PunchHolder();
+//PunchHolder();
//PunchHolder(false);
//OneJig();
+//Jig();
+Demo();
+//JigT();
+//RegistrationProtrusion();
+//PunchHolderT();
+//Kit();