# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR David Braam # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2014-03-17 10:38+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: Cura/gui/app.py:141 Cura/gui/mainWindow.py:563 msgid "A new version of Cura is available, would you like to download?" msgstr "" #: Cura/gui/app.py:141 Cura/gui/mainWindow.py:563 msgid "New version available" msgstr "" #: Cura/gui/configWizard.py:223 msgid "Add new machine wizard" msgstr "" #: Cura/gui/configWizard.py:225 msgid "First time run wizard" msgstr "" #: Cura/gui/configWizard.py:226 msgid "Welcome, and thanks for trying Cura!" msgstr "" #: Cura/gui/configWizard.py:228 msgid "This wizard will help you in setting up Cura for your machine." msgstr "" #: Cura/gui/configWizard.py:245 msgid "The following pre-defined machine profiles are available" msgstr "" #: Cura/gui/configWizard.py:246 msgid "" "Note that these profiles are not guaranteed to give good results,\n" "or work at all. Extra tweaks might be required.\n" "If you find issues with the predefined profiles,\n" "or want an extra profile.\n" "Please report it at the github issue tracker." msgstr "" #: Cura/gui/configWizard.py:276 msgid "Cura is now ready to be used!" msgstr "" #: Cura/gui/configWizard.py:281 msgid "" "RepRap machines can be vastly different, so here you can set your own " "settings." msgstr "" #: Cura/gui/configWizard.py:282 msgid "" "Be sure to review the default profile before running it on your machine." msgstr "" #: Cura/gui/configWizard.py:283 msgid "" "If you like a default profile for your machine added,\n" "then make an issue on github." msgstr "" #: Cura/gui/configWizard.py:285 msgid "You will have to manually install Marlin or Sprinter firmware." msgstr "" #: Cura/gui/configWizard.py:287 msgid "Machine name" msgstr "" #: Cura/gui/configWizard.py:288 msgid "Machine width (mm)" msgstr "" #: Cura/gui/configWizard.py:289 msgid "Machine depth (mm)" msgstr "" #: Cura/gui/configWizard.py:290 msgid "Machine height (mm)" msgstr "" #: Cura/gui/configWizard.py:291 Cura/util/profile.py:175 msgid "Nozzle size (mm)" msgstr "" #: Cura/gui/configWizard.py:292 Cura/util/profile.py:383 msgid "Heated bed" msgstr "" #: Cura/gui/configWizard.py:293 msgid "Bed center is 0,0,0 (RoStock)" msgstr "" #: Cura/gui/configWizard.py:313 msgid "Select your machine" msgstr "" #: Cura/gui/configWizard.py:314 msgid "What kind of machine do you have:" msgstr "" #: Cura/gui/configWizard.py:321 msgid "Other (Ex: RepRap, MakerBot)" msgstr "" #: Cura/gui/configWizard.py:324 msgid "" "The collection of anonymous usage information helps with the continued " "improvement of Cura." msgstr "" #: Cura/gui/configWizard.py:325 msgid "" "This does NOT submit your models online nor gathers any privacy related " "information." msgstr "" #: Cura/gui/configWizard.py:326 msgid "Submit anonymous usage information:" msgstr "" #: Cura/gui/configWizard.py:327 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats" msgstr "" #: Cura/gui/configWizard.py:396 msgid "Select upgraded parts you have" msgstr "" #: Cura/gui/configWizard.py:397 msgid "" "To assist you in having better default settings for your Ultimaker\n" "Cura would like to know which upgrades you have in your machine." msgstr "" #: Cura/gui/configWizard.py:399 msgid "Extruder drive upgrade" msgstr "" #: Cura/gui/configWizard.py:400 msgid "Heated printer bed (self built)" msgstr "" #: Cura/gui/configWizard.py:401 msgid "Dual extrusion (experimental)" msgstr "" #: Cura/gui/configWizard.py:403 msgid "" "If you have an Ultimaker bought after october 2012 you will have the\n" "Extruder drive upgrade. If you do not have this upgrade,\n" "it is highly recommended to improve reliability." msgstr "" #: Cura/gui/configWizard.py:404 msgid "" "This upgrade can be bought from the Ultimaker webshop\n" "or found on thingiverse as thing:26094" msgstr "" #: Cura/gui/configWizard.py:423 msgid "Upgrade Ultimaker Firmware" msgstr "" #: Cura/gui/configWizard.py:424 msgid "" "Firmware is the piece of software running directly on your 3D printer.\n" "This firmware controls the step motors, regulates the temperature\n" "and ultimately makes your printer work." msgstr "" #: Cura/gui/configWizard.py:426 msgid "" "The firmware shipping with new Ultimakers works, but upgrades\n" "have been made to make better prints, and make calibration easier." msgstr "" #: Cura/gui/configWizard.py:428 msgid "" "Cura requires these new features and thus\n" "your firmware will most likely need to be upgraded.\n" "You will get the chance to do so now." msgstr "" #: Cura/gui/configWizard.py:433 msgid "Do not upgrade to this firmware if:" msgstr "" #: Cura/gui/configWizard.py:434 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)" msgstr "" #: Cura/gui/configWizard.py:435 msgid "* Have other changes in the firmware" msgstr "" #: Cura/gui/configWizard.py:469 msgid "" "It is a good idea to do a few sanity checks now on your Ultimaker.\n" "You can skip these if you know your machine is functional." msgstr "" #: Cura/gui/configWizard.py:470 msgid "Run checks" msgstr "" #: Cura/gui/configWizard.py:470 msgid "Skip checks" msgstr "" #: Cura/gui/configWizard.py:474 msgid "Communication:" msgstr "" #: Cura/gui/configWizard.py:475 msgid "Temperature:" msgstr "" #: Cura/gui/configWizard.py:476 msgid "Endstops:" msgstr "" #: Cura/gui/configWizard.py:481 msgid "Show error log" msgstr "" #: Cura/gui/configWizard.py:515 msgid "Connecting to machine." msgstr "" #: Cura/gui/configWizard.py:536 msgid "Cooldown before temperature check." msgstr "" #: Cura/gui/configWizard.py:542 Cura/gui/configWizard.py:549 msgid "Checking the heater and temperature sensor." msgstr "" #: Cura/gui/configWizard.py:560 msgid "Please make sure none of the endstops are pressed." msgstr "" #: Cura/gui/configWizard.py:573 msgid "Temperature measurement FAILED!" msgstr "" #: Cura/gui/configWizard.py:578 #, python-format msgid "Head temperature: %d" msgstr "" #: Cura/gui/configWizard.py:585 Cura/gui/configWizard.py:594 #, python-format msgid "Communication State: %s" msgstr "" #: Cura/gui/configWizard.py:588 msgid "Failed to establish connection with the printer." msgstr "" #: Cura/gui/configWizard.py:633 msgid "Please press the right X endstop." msgstr "" #: Cura/gui/configWizard.py:638 msgid "Please press the left X endstop." msgstr "" #: Cura/gui/configWizard.py:643 msgid "Please press the front Y endstop." msgstr "" #: Cura/gui/configWizard.py:648 msgid "Please press the back Y endstop." msgstr "" #: Cura/gui/configWizard.py:653 msgid "Please press the top Z endstop." msgstr "" #: Cura/gui/configWizard.py:658 msgid "Please press the bottom Z endstop." msgstr "" #: Cura/gui/configWizard.py:664 msgid "Checkup finished" msgstr "" #: Cura/gui/configWizard.py:707 msgid "Calibrating the Steps Per E requires some manual actions." msgstr "" #: Cura/gui/configWizard.py:708 msgid "First remove any filament from your machine." msgstr "" #: Cura/gui/configWizard.py:709 msgid "" "Next put in your filament so the tip is aligned with the\n" "top of the extruder drive." msgstr "" #: Cura/gui/configWizard.py:710 msgid "We'll push the filament 100mm" msgstr "" #: Cura/gui/configWizard.py:711 msgid "Extrude 100mm filament" msgstr "" #: Cura/gui/configWizard.py:712 msgid "" "Now measure the amount of extruded filament:\n" "(this can be more or less then 100mm)" msgstr "" #: Cura/gui/configWizard.py:713 msgid "Save" msgstr "" #: Cura/gui/configWizard.py:714 msgid "This results in the following steps per E:" msgstr "" #: Cura/gui/configWizard.py:716 msgid "You can repeat these steps to get better calibration." msgstr "" #: Cura/gui/configWizard.py:719 msgid "" "If you still have filament in your printer which needs\n" "heat to remove, press the heat up button below:" msgstr "" #: Cura/gui/configWizard.py:720 msgid "Heatup for filament removal" msgstr "" #: Cura/gui/configWizard.py:745 Cura/gui/configWizard.py:779 msgid "" "Error: Failed to open serial port to machine\n" "If this keeps happening, try disconnecting and reconnecting the USB cable" msgstr "" #: Cura/gui/firmwareInstall.py:44 msgid "" "I am sorry, but Cura does not ship with a default firmware for your machine " "configuration." msgstr "" #: Cura/gui/firmwareInstall.py:44 Cura/gui/firmwareInstall.py:48 #: Cura/gui/firmwareInstall.py:103 Cura/gui/mainWindow.py:506 msgid "Firmware update" msgstr "" #: Cura/gui/firmwareInstall.py:48 msgid "" "Cura only supports firmware updates for ATMega2560 based hardware.\n" "So updating your RepRap with Cura might or might not work." msgstr "" #: Cura/gui/firmwareInstall.py:56 msgid "OK" msgstr "" #: Cura/gui/firmwareInstall.py:77 msgid "Reading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:79 msgid "Connecting to machine..." msgstr "" #: Cura/gui/firmwareInstall.py:83 msgid "" "Please connect the printer to\n" "your computer with the USB cable." msgstr "" #: Cura/gui/firmwareInstall.py:102 msgid "" "Failed to find machine for firmware upgrade\n" "Is your machine connected to the PC?" msgstr "" #: Cura/gui/firmwareInstall.py:107 msgid "Uploading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:110 #, python-format msgid "" "Done!\n" "Installed firmware: %s" msgstr "" #: Cura/gui/firmwareInstall.py:112 msgid "Failed to write firmware.\n" msgstr "" #: Cura/gui/mainWindow.py:66 msgid "Load model file...\tCTRL+L" msgstr "" #: Cura/gui/mainWindow.py:68 msgid "Save model...\tCTRL+S" msgstr "" #: Cura/gui/mainWindow.py:70 msgid "Reload platform\tF5" msgstr "" #: Cura/gui/mainWindow.py:72 msgid "Clear platform" msgstr "" #: Cura/gui/mainWindow.py:76 msgid "Print...\tCTRL+P" msgstr "" #: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279 msgid "Save GCode..." msgstr "" #: Cura/gui/mainWindow.py:80 msgid "Show slice engine log..." msgstr "" #: Cura/gui/mainWindow.py:84 msgid "Open Profile..." msgstr "" #: Cura/gui/mainWindow.py:87 msgid "Save Profile..." msgstr "" #: Cura/gui/mainWindow.py:90 msgid "Load Profile from GCode..." msgstr "" #: Cura/gui/mainWindow.py:94 msgid "Reset Profile to default" msgstr "" #: Cura/gui/mainWindow.py:99 msgid "Preferences...\tCTRL+," msgstr "" #: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434 msgid "Machine settings..." msgstr "" #: Cura/gui/mainWindow.py:107 msgid "Recent Model Files" msgstr "" #: Cura/gui/mainWindow.py:114 msgid "Recent Profile Files" msgstr "" #: Cura/gui/mainWindow.py:120 msgid "Quit" msgstr "" #: Cura/gui/mainWindow.py:122 msgid "File" msgstr "" #: Cura/gui/mainWindow.py:130 msgid "Minecraft map import..." msgstr "" #: Cura/gui/mainWindow.py:134 msgid "PID Debugger..." msgstr "" #: Cura/gui/mainWindow.py:137 msgid "Copy profile to clipboard" msgstr "" #: Cura/gui/mainWindow.py:141 msgid "Print all at once" msgstr "" #: Cura/gui/mainWindow.py:143 msgid "Print one at a time" msgstr "" #: Cura/gui/mainWindow.py:150 msgid "Tools" msgstr "" #: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175 msgid "Machine" msgstr "" #: Cura/gui/mainWindow.py:159 msgid "Switch to quickprint..." msgstr "" #: Cura/gui/mainWindow.py:163 msgid "Switch to full settings..." msgstr "" #: Cura/gui/mainWindow.py:168 msgid "Open expert settings...\tCTRL+E" msgstr "" #: Cura/gui/mainWindow.py:172 msgid "Run first run wizard..." msgstr "" #: Cura/gui/mainWindow.py:174 msgid "Run bed leveling wizard..." msgstr "" #: Cura/gui/mainWindow.py:176 msgid "Run head offset wizard..." msgstr "" #: Cura/gui/mainWindow.py:179 msgid "Expert" msgstr "" #: Cura/gui/mainWindow.py:182 msgid "Online documentation..." msgstr "" #: Cura/gui/mainWindow.py:184 msgid "Report a problem..." msgstr "" #: Cura/gui/mainWindow.py:186 msgid "Check for update..." msgstr "" #: Cura/gui/mainWindow.py:188 msgid "Open YouMagine website..." msgstr "" #: Cura/gui/mainWindow.py:190 msgid "About Cura..." msgstr "" #: Cura/gui/mainWindow.py:192 msgid "Help" msgstr "" #: Cura/gui/mainWindow.py:343 msgid "" "For \"One at a time\" printing, you need to have entered the correct head " "size and gantry height in the machine settings" msgstr "" #: Cura/gui/mainWindow.py:343 msgid "One at a time warning" msgstr "" #: Cura/gui/mainWindow.py:440 msgid "Install default firmware..." msgstr "" #: Cura/gui/mainWindow.py:443 msgid "Install custom firmware..." msgstr "" #: Cura/gui/mainWindow.py:447 msgid "Select profile file to load" msgstr "" #: Cura/gui/mainWindow.py:459 msgid "Select gcode file to load profile from" msgstr "" #: Cura/gui/mainWindow.py:472 msgid "" "No profile found in GCode file.\n" "This feature only works with GCode files made by Cura 12.07 or newer." msgstr "" #: Cura/gui/mainWindow.py:472 msgid "Profile load error" msgstr "" #: Cura/gui/mainWindow.py:476 msgid "Select profile file to save" msgstr "" #: Cura/gui/mainWindow.py:486 msgid "" "This will reset all profile settings to defaults.\n" "Unless you have saved your current profile, all settings will be lost!\n" "Do you really want to reset?" msgstr "" #: Cura/gui/mainWindow.py:486 msgid "Profile reset" msgstr "" #: Cura/gui/mainWindow.py:506 msgid "" "Warning: Installing a custom firmware does not guarantee that you machine " "will function correctly, and could damage your machine." msgstr "" #: Cura/gui/mainWindow.py:507 msgid "Open firmware to upload" msgstr "" #: Cura/gui/mainWindow.py:566 msgid "You are running the latest version of Cura!" msgstr "" #: Cura/gui/mainWindow.py:566 msgid "Awesome!" msgstr "" #: Cura/gui/mainWindow.py:621 msgid "Plugins" msgstr "" #: Cura/gui/pluginPanel.py:27 msgid "Plugins:" msgstr "" #: Cura/gui/pluginPanel.py:31 msgid "Open plugin location" msgstr "" #: Cura/gui/pluginPanel.py:32 msgid "Enabled plugins" msgstr "" #: Cura/gui/pluginPanel.py:134 msgid "You need to select a plugin before you can add anything." msgstr "" #: Cura/gui/pluginPanel.py:134 msgid "Error: no plugin selected" msgstr "" #: Cura/gui/preferencesDialog.py:28 msgid "Print window" msgstr "" #: Cura/gui/preferencesDialog.py:31 msgid "Colours" msgstr "" #: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:358 msgid "Language" msgstr "" #: Cura/gui/preferencesDialog.py:40 msgid "Filament settings" msgstr "" #: Cura/gui/preferencesDialog.py:50 msgid "Cura settings" msgstr "" #: Cura/gui/preferencesDialog.py:84 msgid "Machine settings" msgstr "" #: Cura/gui/preferencesDialog.py:95 msgid "Printer head size" msgstr "" #: Cura/gui/preferencesDialog.py:103 #, python-format msgid "Extruder %d" msgstr "" #: Cura/gui/preferencesDialog.py:107 msgid "Communication settings" msgstr "" #: Cura/gui/preferencesDialog.py:150 msgid "Cannot remove the last machine configuration in Cura" msgstr "" #: Cura/gui/preferencesDialog.py:150 msgid "Machine remove error" msgstr "" #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:298 #, python-format msgid "Printing on %s" msgstr "" #: Cura/gui/printWindow.py:310 msgid "" "Your computer is running on battery power.\n" "Connect your computer to AC power or your print might not finish." msgstr "" #: Cura/gui/printWindow.py:320 msgid "" "InfoLine from printer connection\n" "InfoLine from dialog\n" "Extra line" msgstr "" #: Cura/gui/printWindow.py:322 msgid "Connect" msgstr "" #: Cura/gui/printWindow.py:324 Cura/gui/sceneView.py:65 msgid "Print" msgstr "" #: Cura/gui/printWindow.py:325 msgid "Pause" msgstr "" #: Cura/gui/printWindow.py:326 msgid "Cancel print" msgstr "" #: Cura/gui/printWindow.py:327 msgid "Error log" msgstr "" #: Cura/gui/sceneView.py:64 msgid "Load" msgstr "" #: Cura/gui/sceneView.py:69 msgid "Rotate" msgstr "" #: Cura/gui/sceneView.py:70 msgid "Scale" msgstr "" #: Cura/gui/sceneView.py:71 msgid "Mirror" msgstr "" #: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76 msgid "Reset" msgstr "" #: Cura/gui/sceneView.py:74 msgid "Lay flat" msgstr "" #: Cura/gui/sceneView.py:77 msgid "To max" msgstr "" #: Cura/gui/sceneView.py:79 msgid "Mirror X" msgstr "" #: Cura/gui/sceneView.py:80 msgid "Mirror Y" msgstr "" #: Cura/gui/sceneView.py:81 msgid "Mirror Z" msgstr "" #: Cura/gui/sceneView.py:89 msgid "Scale X" msgstr "" #: Cura/gui/sceneView.py:91 msgid "Scale Y" msgstr "" #: Cura/gui/sceneView.py:93 msgid "Scale Z" msgstr "" #: Cura/gui/sceneView.py:95 msgid "Size X (mm)" msgstr "" #: Cura/gui/sceneView.py:97 msgid "Size Y (mm)" msgstr "" #: Cura/gui/sceneView.py:99 msgid "Size Z (mm)" msgstr "" #: Cura/gui/sceneView.py:101 msgid "Uniform scale" msgstr "" #: Cura/gui/sceneView.py:104 msgid "View mode" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Normal" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Overhang" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Transparent" msgstr "" #: Cura/gui/sceneView.py:104 msgid "X-Ray" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Layers" msgstr "" #: Cura/gui/sceneView.py:106 msgid "Share on YouMagine" msgstr "" #: Cura/gui/sceneView.py:204 msgid "Open 3D model" msgstr "" #: Cura/gui/sceneView.py:229 msgid "Save 3D model" msgstr "" #: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914 #, python-format msgid "Print with %s" msgstr "" #: Cura/gui/sceneView.py:280 msgid "Slice engine log..." msgstr "" #: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917 msgid "Save toolpath" msgstr "" #: Cura/gui/sceneView.py:351 msgid "The slicing engine reported the following" msgstr "" #: Cura/gui/sceneView.py:351 msgid "Engine log..." msgstr "" #: Cura/gui/sceneView.py:490 msgid "How many copies do you want?" msgstr "" #: Cura/gui/sceneView.py:490 msgid "Number of copies" msgstr "" #: Cura/gui/sceneView.py:490 msgid "Multiply" msgstr "" #: Cura/gui/sceneView.py:780 msgid "Center on platform" msgstr "" #: Cura/gui/sceneView.py:781 msgid "Delete object" msgstr "" #: Cura/gui/sceneView.py:782 msgid "Multiply object" msgstr "" #: Cura/gui/sceneView.py:783 msgid "Split object into parts" msgstr "" #: Cura/gui/sceneView.py:785 msgid "Dual extrusion merge" msgstr "" #: Cura/gui/sceneView.py:787 msgid "Delete all objects" msgstr "" #: Cura/gui/sceneView.py:788 msgid "Reload all objects" msgstr "" #: Cura/gui/sceneView.py:911 msgid "Toolpath to SD" msgstr "" #: Cura/gui/sceneView.py:1205 msgid "Overhang view not working due to lack of OpenGL shaders support." msgstr "" #: Cura/gui/simpleMode.py:19 msgid "High quality print" msgstr "" #: Cura/gui/simpleMode.py:20 msgid "Normal quality print" msgstr "" #: Cura/gui/simpleMode.py:21 msgid "Fast low quality print" msgstr "" #: Cura/gui/simpleMode.py:22 msgid "Thin walled cup or vase" msgstr "" #: Cura/gui/simpleMode.py:32 msgid "Print support structure" msgstr "" #: Cura/gui/simpleMode.py:37 msgid "Select a quickprint profile:" msgstr "" #: Cura/gui/simpleMode.py:47 msgid "Material:" msgstr "" #: Cura/gui/simpleMode.py:51 msgid "Diameter:" msgstr "" #: Cura/gui/simpleMode.py:57 msgid "Other:" msgstr "" #: Cura/gui/simpleMode.py:85 msgid "Exterior Only" msgstr "" #: Cura/gui/tools/imageToMesh.py:28 msgid "Height (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:32 msgid "Base (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:36 msgid "Width (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:40 msgid "Depth (mm)" msgstr "" #: Cura/gui/tools/projector.py:42 msgid "Edit" msgstr "" #: Cura/gui/tools/projector.py:43 msgid "Rectangle" msgstr "" #: Cura/gui/tools/projector.py:44 msgid "Circle" msgstr "" #: Cura/gui/tools/projector.py:45 msgid "Draw curves" msgstr "" #: Cura/gui/tools/youmagineGui.py:78 msgid "Checking token" msgstr "" #: Cura/gui/tools/youmagineGui.py:82 msgid "Failed to contact YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153 msgid "YouMagine error." msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "Cura is now authorized to share on YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "YouMagine." msgstr "" #: Cura/gui/tools/youmagineGui.py:112 msgid "Creating new design on YouMagine..." msgstr "" #: Cura/gui/tools/youmagineGui.py:116 msgid "Failed to create a design, nothing uploaded!" msgstr "" #: Cura/gui/tools/youmagineGui.py:120 #, python-format msgid "Building model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:131 #, python-format msgid "Uploading model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 #, python-format msgid "Failed to upload %s!" msgstr "" #: Cura/gui/tools/youmagineGui.py:137 #, python-format msgid "Uploading file %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:145 #, python-format msgid "Uploading image %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:153 msgid "Failed to upload snapshot!" msgstr "" #: Cura/gui/tools/youmagineGui.py:158 msgid "Publishing design..." msgstr "" #: Cura/gui/tools/youmagineGui.py:230 msgid "Request authorization from YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:231 msgid "Paste token here" msgstr "" #: Cura/gui/tools/youmagineGui.py:237 msgid "" "To share your designs on YouMagine\n" "you need an account on YouMagine.com\n" "and authorize Cura to access your account." msgstr "" #: Cura/gui/tools/youmagineGui.py:239 msgid "" "This will open a browser window where you can\n" "authorize Cura to access your YouMagine account.\n" "You can revoke access at any time\n" "from YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:274 msgid "Design name" msgstr "" #: Cura/gui/tools/youmagineGui.py:278 msgid "Publish after upload" msgstr "" #: Cura/gui/tools/youmagineGui.py:279 msgid "Share!" msgstr "" #: Cura/gui/tools/youmagineGui.py:287 msgid "Add..." msgstr "" #: Cura/gui/tools/youmagineGui.py:289 msgid "Webcam..." msgstr "" #: Cura/gui/tools/youmagineGui.py:299 msgid "" "Directly publish the design after uploading.\n" "Without this check the design will not be public\n" "until you publish it yourself on YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:305 msgid "Design name:" msgstr "" #: Cura/gui/tools/youmagineGui.py:307 msgid "Description:" msgstr "" #: Cura/gui/tools/youmagineGui.py:309 msgid "Category:" msgstr "" #: Cura/gui/tools/youmagineGui.py:311 msgid "License:" msgstr "" #: Cura/gui/tools/youmagineGui.py:314 msgid "Images:" msgstr "" #: Cura/gui/tools/youmagineGui.py:317 msgid "Related design files:" msgstr "" #: Cura/gui/tools/youmagineGui.py:340 msgid "The name cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344 msgid "New design error." msgstr "" #: Cura/gui/tools/youmagineGui.py:344 msgid "The description cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:370 msgid "No webcam found on your system" msgstr "" #: Cura/gui/tools/youmagineGui.py:370 msgid "Webcam error" msgstr "" #: Cura/gui/util/engineResultView.py:165 #, python-format msgid "Loading toolpath for visualization (%d%%)" msgstr "" #: Cura/gui/util/openglGui.py:242 msgid "An error has occurred during the 3D view drawing." msgstr "" #: Cura/gui/util/openglGui.py:250 msgid "3D window error" msgstr "" #: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172 #: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:203 msgid "Quality" msgstr "" #: Cura/util/profile.py:170 msgid "Layer height (mm)" msgstr "" #: Cura/util/profile.py:170 msgid "" "Layer height in millimeters.\n" "This is the most important setting to determine the quality of your print. " "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to " "0.25mm with an Ultimaker for very fast prints at low quality." msgstr "" #: Cura/util/profile.py:171 msgid "Shell thickness (mm)" msgstr "" #: Cura/util/profile.py:171 msgid "" "Thickness of the outside shell in the horizontal direction.\n" "This is used in combination with the nozzle size to define the number\n" "of perimeter lines and the thickness of those perimeter lines." msgstr "" #: Cura/util/profile.py:172 msgid "Enable retraction" msgstr "" #: Cura/util/profile.py:172 msgid "" "Retract the filament when the nozzle is moving over a none-printed area. " "Details about the retraction can be configured in the advanced tab." msgstr "" #: Cura/util/profile.py:173 Cura/util/profile.py:174 msgid "Fill" msgstr "" #: Cura/util/profile.py:173 msgid "Bottom/Top thickness (mm)" msgstr "" #: Cura/util/profile.py:173 msgid "" "This controls the thickness of the bottom and top layers, the amount of " "solid layers put down is calculated by the layer thickness and this value.\n" "Having this value a multiple of the layer thickness makes sense. And keep it " "near your wall thickness to make an evenly strong part." msgstr "" #: Cura/util/profile.py:174 msgid "Fill Density (%)" msgstr "" #: Cura/util/profile.py:174 msgid "" "This controls how densely filled the insides of your print will be. For a " "solid part use 100%, for an empty part use 0%. A value around 20% is usually " "enough.\n" "This won't affect the outside of the print and only adjusts how strong the " "part becomes." msgstr "" #: Cura/util/profile.py:175 msgid "" "The nozzle size is very important, this is used to calculate the line width " "of the infill, and used to calculate the amount of outside wall lines and " "thickness for the wall thickness you entered in the print settings." msgstr "" #: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178 #: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181 msgid "Speed and Temperature" msgstr "" #: Cura/util/profile.py:176 msgid "Print speed (mm/s)" msgstr "" #: Cura/util/profile.py:176 msgid "" "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/" "s, but for good quality prints you want to print slower. Printing speed " "depends on a lot of factors. So you will be experimenting with optimal " "settings for this." msgstr "" #: Cura/util/profile.py:177 msgid "Printing temperature (C)" msgstr "" #: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179 #: Cura/util/profile.py:180 msgid "" "Temperature used for printing. Set at 0 to pre-heat yourself.\n" "For PLA a value of 210C is usually used.\n" "For ABS a value of 230C or higher is required." msgstr "" #: Cura/util/profile.py:178 msgid "2nd nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:179 msgid "3th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:180 msgid "4th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:181 msgid "Bed temperature (C)" msgstr "" #: Cura/util/profile.py:181 msgid "" "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself." msgstr "" #: Cura/util/profile.py:182 Cura/util/profile.py:183 msgid "None" msgstr "" #: Cura/util/profile.py:182 msgid "Touching buildplate" msgstr "" #: Cura/util/profile.py:182 msgid "Everywhere" msgstr "" #: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184 #: Cura/util/profile.py:223 Cura/util/profile.py:224 Cura/util/profile.py:225 #: Cura/util/profile.py:226 Cura/util/profile.py:227 msgid "Support" msgstr "" #: Cura/util/profile.py:182 msgid "Support type" msgstr "" #: Cura/util/profile.py:182 msgid "" "Type of support structure build.\n" "\"Touching buildplate\" is the most commonly used support setting.\n" "\n" "None does not do any support.\n" "Touching buildplate only creates support where the support structure will " "touch the build platform.\n" "Everywhere creates support even on top of parts of the model." msgstr "" #: Cura/util/profile.py:183 Cura/util/profile.py:230 msgid "Brim" msgstr "" #: Cura/util/profile.py:183 Cura/util/profile.py:231 Cura/util/profile.py:232 #: Cura/util/profile.py:233 Cura/util/profile.py:234 Cura/util/profile.py:235 #: Cura/util/profile.py:236 msgid "Raft" msgstr "" #: Cura/util/profile.py:183 msgid "Platform adhesion type" msgstr "" #: Cura/util/profile.py:183 msgid "" "Different options that help in preventing corners from lifting due to " "warping.\n" "Brim adds a single layer thick flat area around your object which is easy to " "cut off afterwards, and it is the recommended option.\n" "Raft adds a thick raster below the object and a thin interface between this " "and your object.\n" "(Note that enabling the brim or raft disables the skirt)" msgstr "" #: Cura/util/profile.py:184 msgid "Both" msgstr "" #: Cura/util/profile.py:184 msgid "First extruder" msgstr "" #: Cura/util/profile.py:184 msgid "Second extruder" msgstr "" #: Cura/util/profile.py:184 msgid "Support dual extrusion" msgstr "" #: Cura/util/profile.py:184 msgid "" "Which extruder to use for support material, for break-away support you can " "use both extruders.\n" "But if one of the materials is more expensive then the other you could " "select an extruder to use for support material. This causes more extruder " "switches.\n" "You can also use the 2nd extruder for soluble support materials." msgstr "" #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187 msgid "Dual extrusion" msgstr "" #: Cura/util/profile.py:185 msgid "Wipe&prime tower" msgstr "" #: Cura/util/profile.py:185 msgid "" "The wipe-tower is a tower printed on every layer when switching between " "nozzles.\n" "The old nozzle is wiped off on the tower before the new nozzle is used to " "print the 2nd color." msgstr "" #: Cura/util/profile.py:186 msgid "Wipe&prime tower volume per layer (mm3)" msgstr "" #: Cura/util/profile.py:186 msgid "" "The amount of material put in the wipe/prime tower.\n" "This is done in volume because in general you want to extrude a\n" "certain amount of volume to get the extruder going, independent on the layer " "height.\n" "This means that with thinner layers, your tower gets bigger." msgstr "" #: Cura/util/profile.py:187 msgid "Ooze shield" msgstr "" #: Cura/util/profile.py:187 msgid "" "The ooze shield is a 1 line thick shell around the object which stands a few " "mm from the object.\n" "This shield catches any oozing from the unused nozzle in dual-extrusion." msgstr "" #: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190 #: Cura/util/profile.py:191 Cura/util/profile.py:192 msgid "Filament" msgstr "" #: Cura/util/profile.py:188 msgid "Diameter (mm)" msgstr "" #: Cura/util/profile.py:188 msgid "" "Diameter of your filament, as accurately as possible.\n" "If you cannot measure this value you will have to calibrate it, a higher " "number means less extrusion, a smaller number generates more extrusion." msgstr "" #: Cura/util/profile.py:189 msgid "Diameter2 (mm)" msgstr "" #: Cura/util/profile.py:189 msgid "" "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:190 msgid "Diameter3 (mm)" msgstr "" #: Cura/util/profile.py:190 msgid "" "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:191 msgid "Diameter4 (mm)" msgstr "" #: Cura/util/profile.py:191 msgid "" "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:192 msgid "Flow (%)" msgstr "" #: Cura/util/profile.py:192 msgid "" "Flow compensation, the amount of material extruded is multiplied by this " "value" msgstr "" #: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195 #: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198 #: Cura/util/profile.py:199 msgid "Retraction" msgstr "" #: Cura/util/profile.py:193 msgid "Speed (mm/s)" msgstr "" #: Cura/util/profile.py:193 msgid "" "Speed at which the filament is retracted, a higher retraction speed works " "better. But a very high retraction speed can lead to filament grinding." msgstr "" #: Cura/util/profile.py:194 msgid "Distance (mm)" msgstr "" #: Cura/util/profile.py:194 msgid "" "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm " "seems to generate good results." msgstr "" #: Cura/util/profile.py:195 msgid "Dual extrusion switch amount (mm)" msgstr "" #: Cura/util/profile.py:195 msgid "" "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for " "no retraction at all. A value of 16.0mm seems to generate good results." msgstr "" #: Cura/util/profile.py:196 msgid "Minimum travel (mm)" msgstr "" #: Cura/util/profile.py:196 msgid "" "Minimum amount of travel needed for a retraction to happen at all. To make " "sure you do not get a lot of retractions in a small area." msgstr "" #: Cura/util/profile.py:197 msgid "Enable combing" msgstr "" #: Cura/util/profile.py:197 msgid "" "Combing is the act of avoiding holes in the print for the head to travel " "over. If combing is disabled the printer head moves straight from the start " "point to the end point and it will always retract." msgstr "" #: Cura/util/profile.py:198 msgid "Minimal extrusion before retracting (mm)" msgstr "" #: Cura/util/profile.py:198 msgid "" "The minimal amount of extrusion that needs to be done before retracting " "again if a retraction needs to happen before this minimal is reached the " "retraction is ignored.\n" "This avoids retracting a lot on the same piece of filament which flattens " "the filament and causes grinding issues." msgstr "" #: Cura/util/profile.py:199 msgid "Z hop when retracting (mm)" msgstr "" #: Cura/util/profile.py:199 msgid "" "When a retraction is done, the head is lifted by this amount to travel over " "the print. A value of 0.075 works well. This feature has a lot of positive " "effect on delta towers." msgstr "" #: Cura/util/profile.py:200 msgid "Initial layer thickness (mm)" msgstr "" #: Cura/util/profile.py:200 msgid "" "Layer thickness of the bottom layer. A thicker bottom layer makes sticking " "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as " "the other layers." msgstr "" #: Cura/util/profile.py:201 msgid "Cut off object bottom (mm)" msgstr "" #: Cura/util/profile.py:201 msgid "" "Sinks the object into the platform, this can be used for objects that do not " "have a flat bottom and thus create a too small first layer." msgstr "" #: Cura/util/profile.py:203 msgid "Dual extrusion overlap (mm)" msgstr "" #: Cura/util/profile.py:203 msgid "" "Add a certain amount of overlapping extrusion on dual-extrusion prints. This " "bonds the different colors together." msgstr "" #: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206 #: Cura/util/profile.py:207 Cura/util/profile.py:208 msgid "Speed" msgstr "" #: Cura/util/profile.py:204 msgid "Travel speed (mm/s)" msgstr "" #: Cura/util/profile.py:204 msgid "" "Speed at which travel moves are done, a well built Ultimaker can reach " "speeds of 250mm/s. But some machines might miss steps then." msgstr "" #: Cura/util/profile.py:205 msgid "Bottom layer speed (mm/s)" msgstr "" #: Cura/util/profile.py:205 msgid "" "Print speed for the bottom layer, you want to print the first layer slower " "so it sticks better to the printer bed." msgstr "" #: Cura/util/profile.py:206 msgid "Infill speed (mm/s)" msgstr "" #: Cura/util/profile.py:206 msgid "" "Speed at which infill parts are printed. If set to 0 then the print speed is " "used for the infill. Printing the infill faster can greatly reduce printing " "time, but this can negatively affect print quality." msgstr "" #: Cura/util/profile.py:207 msgid "Outer shell speed (mm/s)" msgstr "" #: Cura/util/profile.py:207 msgid "" "Speed at which outer shell is printed. If set to 0 then the print speed is " "used. Printing the outer shell at a lower speed improves the final skin " "quality. However, having a large difference between the inner shell speed " "and the outer shell speed will effect quality in a negative way." msgstr "" #: Cura/util/profile.py:208 msgid "Inner shell speed (mm/s)" msgstr "" #: Cura/util/profile.py:208 msgid "" "Speed at which inner shells are printed. If set to 0 then the print speed is " "used. Printing the inner shell faster then the outer shell will reduce " "printing time. It is good to set this somewhere in between the outer shell " "speed and the infill/printing speed." msgstr "" #: Cura/util/profile.py:209 Cura/util/profile.py:210 Cura/util/profile.py:215 #: Cura/util/profile.py:216 Cura/util/profile.py:217 Cura/util/profile.py:218 #: Cura/util/profile.py:219 msgid "Cool" msgstr "" #: Cura/util/profile.py:209 msgid "Minimal layer time (sec)" msgstr "" #: Cura/util/profile.py:209 msgid "" "Minimum time spent in a layer, gives the layer time to cool down before the " "next layer is put on top. If the layer will be placed down too fast the " "printer will slow down to make sure it has spent at least this amount of " "seconds printing this layer." msgstr "" #: Cura/util/profile.py:210 msgid "Enable cooling fan" msgstr "" #: Cura/util/profile.py:210 msgid "" "Enable the cooling fan during the print. The extra cooling from the cooling " "fan is essential during faster prints." msgstr "" #: Cura/util/profile.py:212 msgid "Line count" msgstr "" #: Cura/util/profile.py:212 msgid "" "The skirt is a line drawn around the object at the first layer. This helps " "to prime your extruder, and to see if the object fits on your platform.\n" "Setting this to 0 will disable the skirt. Multiple skirt lines can help " "priming your extruder better for small objects." msgstr "" #: Cura/util/profile.py:213 msgid "Start distance (mm)" msgstr "" #: Cura/util/profile.py:213 msgid "" "The distance between the skirt and the first layer.\n" "This is the minimal distance, multiple skirt lines will be put outwards from " "this distance." msgstr "" #: Cura/util/profile.py:214 msgid "Minimal length (mm)" msgstr "" #: Cura/util/profile.py:214 msgid "" "The minimal length of the skirt, if this minimal length is not reached it " "will add more skirt lines to reach this minimal lenght.\n" "Note: If the line count is set to 0 this is ignored." msgstr "" #: Cura/util/profile.py:215 msgid "Fan full on at height (mm)" msgstr "" #: Cura/util/profile.py:215 msgid "" "The height at which the fan is turned on completely. For the layers below " "this the fan speed is scaled linearly with the fan off at layer 0." msgstr "" #: Cura/util/profile.py:216 msgid "Fan speed min (%)" msgstr "" #: Cura/util/profile.py:216 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Minimal fan speed is used if the layer is not slowed down due to cooling." msgstr "" #: Cura/util/profile.py:217 msgid "Fan speed max (%)" msgstr "" #: Cura/util/profile.py:217 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Maximal fan speed is used if the layer is slowed down due to cooling by more " "than 200%." msgstr "" #: Cura/util/profile.py:218 msgid "Minimum speed (mm/s)" msgstr "" #: Cura/util/profile.py:218 msgid "" "The minimal layer time can cause the print to slow down so much it starts to " "ooze. The minimal feedrate protects against this. Even if a print gets " "slowed down it will never be slower than this minimal speed." msgstr "" #: Cura/util/profile.py:219 msgid "Cool head lift" msgstr "" #: Cura/util/profile.py:219 msgid "" "Lift the head if the minimal speed is hit because of cool slowdown, and wait " "the extra time so the minimal layer time is always hit." msgstr "" #: Cura/util/profile.py:220 Cura/util/profile.py:221 Cura/util/profile.py:222 msgid "Infill" msgstr "" #: Cura/util/profile.py:220 msgid "Solid infill top" msgstr "" #: Cura/util/profile.py:220 msgid "" "Create a solid top surface, if set to false the top is filled with the fill " "percentage. Useful for cups/vases." msgstr "" #: Cura/util/profile.py:221 msgid "Solid infill bottom" msgstr "" #: Cura/util/profile.py:221 msgid "" "Create a solid bottom surface, if set to false the bottom is filled with the " "fill percentage. Useful for buildings." msgstr "" #: Cura/util/profile.py:222 msgid "Infill overlap (%)" msgstr "" #: Cura/util/profile.py:222 msgid "" "Amount of overlap between the infill and the walls. There is a slight " "overlap with the walls and the infill so the walls connect firmly to the " "infill." msgstr "" #: Cura/util/profile.py:223 msgid "Structure type" msgstr "" #: Cura/util/profile.py:223 msgid "" "The type of support structure.\n" "Grid is very strong and can come off in 1 piece, however, sometimes it is " "too strong.\n" "Lines are single walled lines that break off one at a time. Which is more " "work to remove, but as it is less strong it does work better on tricky " "prints." msgstr "" #: Cura/util/profile.py:224 msgid "Overhang angle for support (deg)" msgstr "" #: Cura/util/profile.py:224 msgid "" "The minimal angle that overhangs need to have to get support. With 0 degree " "being horizontal and 90 degree being vertical." msgstr "" #: Cura/util/profile.py:225 msgid "Fill amount (%)" msgstr "" #: Cura/util/profile.py:225 #, python-format msgid "" "Amount of infill structure in the support material, less material gives " "weaker support which is easier to remove. 15% seems to be a good average." msgstr "" #: Cura/util/profile.py:226 msgid "Distance X/Y (mm)" msgstr "" #: Cura/util/profile.py:226 msgid "" "Distance of the support material from the print, in the X/Y directions.\n" "0.7mm gives a nice distance from the print so the support does not stick to " "the print." msgstr "" #: Cura/util/profile.py:227 msgid "Distance Z (mm)" msgstr "" #: Cura/util/profile.py:227 msgid "" "Distance from the top/bottom of the support to the print. A small gap here " "makes it easier to remove the support but makes the print a bit uglier.\n" "0.15mm gives a good seperation of the support material." msgstr "" #: Cura/util/profile.py:228 msgid "Spiralize the outer contour" msgstr "" #: Cura/util/profile.py:228 msgid "" "Spiralize is smoothing out the Z move of the outer edge. This will create a " "steady Z increase over the whole print. This feature turns a solid object " "into a single walled print with a solid bottom." msgstr "" #: Cura/util/profile.py:230 msgid "Brim line amount" msgstr "" #: Cura/util/profile.py:230 msgid "" "The amount of lines used for a brim, more lines means a larger brim which " "sticks better, but this also makes your effective print area smaller." msgstr "" #: Cura/util/profile.py:231 msgid "Extra margin (mm)" msgstr "" #: Cura/util/profile.py:231 msgid "" "If the raft is enabled, this is the extra raft area around the object which " "is also rafted. Increasing this margin will create a stronger raft while " "using more material and leaving less area for your print." msgstr "" #: Cura/util/profile.py:232 msgid "Line spacing (mm)" msgstr "" #: Cura/util/profile.py:232 msgid "" "When you are using the raft this is the distance between the centerlines of " "the raft line." msgstr "" #: Cura/util/profile.py:233 msgid "Base thickness (mm)" msgstr "" #: Cura/util/profile.py:233 msgid "" "When you are using the raft this is the thickness of the base layer which is " "put down." msgstr "" #: Cura/util/profile.py:234 msgid "Base line width (mm)" msgstr "" #: Cura/util/profile.py:234 msgid "" "When you are using the raft this is the width of the base layer lines which " "are put down." msgstr "" #: Cura/util/profile.py:235 msgid "Interface thickness (mm)" msgstr "" #: Cura/util/profile.py:235 msgid "" "When you are using the raft this is the thickness of the interface layer " "which is put down." msgstr "" #: Cura/util/profile.py:236 msgid "Interface line width (mm)" msgstr "" #: Cura/util/profile.py:236 msgid "" "When you are using the raft this is the width of the interface layer lines " "which are put down." msgstr "" #: Cura/util/profile.py:237 Cura/util/profile.py:238 Cura/util/profile.py:239 #: Cura/util/profile.py:240 msgid "Fix horrible" msgstr "" #: Cura/util/profile.py:237 msgid "Combine everything (Type-A)" msgstr "" #: Cura/util/profile.py:237 Cura/util/profile.py:238 msgid "" "This expert option adds all parts of the model together. The result is " "usually that internal cavities disappear. Depending on the model this can be " "intended or not. Enabling this option is at your own risk. Type-A is " "dependent on the model normals and tries to keep some internal holes intact. " "Type-B ignores all internal holes and only keeps the outside shape per layer." msgstr "" #: Cura/util/profile.py:238 msgid "Combine everything (Type-B)" msgstr "" #: Cura/util/profile.py:239 msgid "Keep open faces" msgstr "" #: Cura/util/profile.py:239 msgid "" "This expert option keeps all the open bits of the model intact. Normally " "Cura tries to stitch up small holes and remove everything with big holes, " "but this option keeps bits that are not properly part of anything and just " "goes with whatever is left. This option is usually not what you want, but it " "might enable you to slice models otherwise failing to produce proper paths.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:240 msgid "Extensive stitching" msgstr "" #: Cura/util/profile.py:240 msgid "" "Extensive stitching tries to fix up open holes in the model by closing the " "hole with touching polygons. This algorthm is quite expensive and could " "introduce a lot of processing time.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:350 msgid "Save profile on slice" msgstr "" #: Cura/util/profile.py:350 msgid "" "When slicing save the profile as [stl_file]_profile.ini next to the model." msgstr "" #: Cura/util/profile.py:351 msgid "Cost (price/kg)" msgstr "" #: Cura/util/profile.py:351 msgid "Cost of your filament per kg, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:352 msgid "Cost (price/m)" msgstr "" #: Cura/util/profile.py:352 msgid "" "Cost of your filament per meter, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:353 msgid "Auto detect SD card drive" msgstr "" #: Cura/util/profile.py:353 msgid "" "Auto detect the SD card. You can disable this because on some systems " "external hard-drives or USB sticks are detected as SD card." msgstr "" #: Cura/util/profile.py:354 msgid "Check for updates" msgstr "" #: Cura/util/profile.py:354 msgid "Check for newer versions of Cura on startup" msgstr "" #: Cura/util/profile.py:355 msgid "Send usage statistics" msgstr "" #: Cura/util/profile.py:355 msgid "Submit anonymous usage information to improve future versions of Cura" msgstr "" #: Cura/util/profile.py:357 msgid "Density (kg/m3)" msgstr "" #: Cura/util/profile.py:357 msgid "" "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. " "This value is used to estimate the weight if the filament used for the print." msgstr "" #: Cura/util/profile.py:358 msgid "" "Change the language in which Cura runs. Switching language requires a " "restart of Cura" msgstr "" #: Cura/util/profile.py:361 msgid "Model colour" msgstr "" #: Cura/util/profile.py:361 msgid "Display color for first extruder" msgstr "" #: Cura/util/profile.py:362 msgid "Model colour (2)" msgstr "" #: Cura/util/profile.py:362 msgid "Display color for second extruder" msgstr "" #: Cura/util/profile.py:363 msgid "Model colour (3)" msgstr "" #: Cura/util/profile.py:363 msgid "Display color for third extruder" msgstr "" #: Cura/util/profile.py:364 msgid "Model colour (4)" msgstr "" #: Cura/util/profile.py:364 msgid "Display color for forth extruder" msgstr "" #: Cura/util/profile.py:365 msgid "Printing window type" msgstr "" #: Cura/util/profile.py:365 msgid "Select the interface used for USB printing." msgstr "" #: Cura/util/profile.py:377 msgid "Maximum width (mm)" msgstr "" #: Cura/util/profile.py:377 Cura/util/profile.py:378 Cura/util/profile.py:379 msgid "Size of the machine in mm" msgstr "" #: Cura/util/profile.py:378 msgid "Maximum depth (mm)" msgstr "" #: Cura/util/profile.py:379 msgid "Maximum height (mm)" msgstr "" #: Cura/util/profile.py:380 msgid "Machine center 0,0" msgstr "" #: Cura/util/profile.py:380 msgid "" "Machines firmware defines the center of the bed as 0,0 instead of the front " "left corner." msgstr "" #: Cura/util/profile.py:381 msgid "Build area shape" msgstr "" #: Cura/util/profile.py:381 msgid "The shape of machine build area." msgstr "" #: Cura/util/profile.py:383 msgid "" "If you have an heated bed, this enabled heated bed settings (requires " "restart)" msgstr "" #: Cura/util/profile.py:384 msgid "GCode Flavor" msgstr "" #: Cura/util/profile.py:384 msgid "" "Flavor of generated GCode.\n" "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n" "UltiGCode is a variation of the RepRap GCode which puts more settings in the " "machine instead of the slicer.\n" "MakerBot GCode has a few changes in the way GCode is generated, but still " "requires MakerWare to generate to X3G." msgstr "" #: Cura/util/profile.py:385 msgid "Extruder count" msgstr "" #: Cura/util/profile.py:385 msgid "Amount of extruders in your machine." msgstr "" #: Cura/util/profile.py:386 Cura/util/profile.py:388 Cura/util/profile.py:390 msgid "Offset X" msgstr "" #: Cura/util/profile.py:386 Cura/util/profile.py:387 msgid "The offset of your secondary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:387 Cura/util/profile.py:389 Cura/util/profile.py:391 msgid "Offset Y" msgstr "" #: Cura/util/profile.py:388 Cura/util/profile.py:389 msgid "The offset of your tertiary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:390 Cura/util/profile.py:391 msgid "The offset of your forth extruder compared to the primary." msgstr "" #: Cura/util/profile.py:392 msgid "E-Steps per 1mm filament" msgstr "" #: Cura/util/profile.py:392 msgid "" "Amount of steps per mm filament extrusion. If set to 0 then this value is " "ignored and the value in your firmware is used." msgstr "" #: Cura/util/profile.py:393 msgid "Serial port" msgstr "" #: Cura/util/profile.py:393 msgid "Serial port to use for communication with the printer" msgstr "" #: Cura/util/profile.py:395 msgid "Baudrate" msgstr "" #: Cura/util/profile.py:395 msgid "" "Speed of the serial port communication\n" "Needs to match your firmware settings\n" "Common values are 250000, 115200, 57600" msgstr "" #: Cura/util/profile.py:398 msgid "Head size towards X min (mm)" msgstr "" #: Cura/util/profile.py:398 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:399 msgid "Head size towards Y min (mm)" msgstr "" #: Cura/util/profile.py:399 Cura/util/profile.py:400 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:400 msgid "Head size towards X max (mm)" msgstr "" #: Cura/util/profile.py:401 msgid "Head size towards Y max (mm)" msgstr "" #: Cura/util/profile.py:401 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:402 msgid "Printer gantry height (mm)" msgstr "" #: Cura/util/profile.py:402 msgid "" "The height of the gantry holding up the printer head. If an object is higher " "then this then you cannot print multiple objects one for one. 60mm for an " "Ultimaker." msgstr "" #: Cura/util/profile.py:404 #, python-format msgid "More flow than 150% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:405 #, python-format msgid "Less flow than 50% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:406 #, python-format msgid "" "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and " "are not recommended." msgstr "" #: Cura/util/profile.py:408 msgid "" "It is highly unlikely that your machine can achieve a printing speed above " "150mm/s" msgstr "" #: Cura/util/profile.py:410 Cura/util/profile.py:411 Cura/util/profile.py:412 #: Cura/util/profile.py:413 msgid "Temperatures above 260C could damage your machine, be careful!" msgstr "" #: Cura/util/profile.py:414 Cura/util/profile.py:415 Cura/util/profile.py:416 #: Cura/util/profile.py:417 msgid "" "Are you sure your filament is that thick? Normal filament is around 3mm or " "1.75mm." msgstr "" #: Cura/util/profile.py:418 msgid "" "It is highly unlikely that your machine can achieve a travel speed above " "300mm/s" msgstr "" #: Cura/util/profile.py:419 #, python-format msgid "" "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad " "results and is not recommended." msgstr ""