# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR David Braam # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2014-12-08 10:01+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613 msgid "A new version of Cura is available, would you like to download?" msgstr "" #: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613 msgid "New version available" msgstr "" #: Cura/gui/configWizard.py:231 msgid "Add new machine wizard" msgstr "" #: Cura/gui/configWizard.py:233 msgid "First time run wizard" msgstr "" #: Cura/gui/configWizard.py:234 msgid "Welcome, and thanks for trying Cura!" msgstr "" #: Cura/gui/configWizard.py:236 msgid "This wizard will help you in setting up Cura for your machine." msgstr "" #: Cura/gui/configWizard.py:239 msgid "Select your language:" msgstr "" #: Cura/gui/configWizard.py:266 msgid "Older models" msgstr "" #: Cura/gui/configWizard.py:283 msgid "Printrbot Selection" msgstr "" #: Cura/gui/configWizard.py:285 msgid "Select which Printrbot machine you have:" msgstr "" #: Cura/gui/configWizard.py:323 msgid "Other machine information" msgstr "" #: Cura/gui/configWizard.py:324 msgid "The following pre-defined machine profiles are available" msgstr "" #: Cura/gui/configWizard.py:325 msgid "" "Note that these profiles are not guaranteed to give good results,\n" "or work at all. Extra tweaks might be required.\n" "If you find issues with the predefined profiles,\n" "or want an extra profile.\n" "Please report it at the github issue tracker." msgstr "" #: Cura/gui/configWizard.py:336 msgid "Custom..." msgstr "" #: Cura/gui/configWizard.py:354 msgid "Cura Ready!" msgstr "" #: Cura/gui/configWizard.py:355 msgid "Cura is now ready to be used!" msgstr "" #: Cura/gui/configWizard.py:359 msgid "Custom RepRap information" msgstr "" #: Cura/gui/configWizard.py:360 msgid "" "RepRap machines can be vastly different, so here you can set your own " "settings." msgstr "" #: Cura/gui/configWizard.py:361 msgid "" "Be sure to review the default profile before running it on your machine." msgstr "" #: Cura/gui/configWizard.py:362 msgid "" "If you like a default profile for your machine added,\n" "then make an issue on github." msgstr "" #: Cura/gui/configWizard.py:364 msgid "You will have to manually install Marlin or Sprinter firmware." msgstr "" #: Cura/gui/configWizard.py:366 msgid "Machine name" msgstr "" #: Cura/gui/configWizard.py:367 msgid "Machine width (mm)" msgstr "" #: Cura/gui/configWizard.py:368 msgid "Machine depth (mm)" msgstr "" #: Cura/gui/configWizard.py:369 msgid "Machine height (mm)" msgstr "" #: Cura/gui/configWizard.py:370 Cura/util/profile.py:183 msgid "Nozzle size (mm)" msgstr "" #: Cura/gui/configWizard.py:371 Cura/util/profile.py:514 msgid "Heated bed" msgstr "" #: Cura/gui/configWizard.py:372 msgid "Bed center is 0,0,0 (RoStock)" msgstr "" #: Cura/gui/configWizard.py:392 msgid "Select your machine" msgstr "" #: Cura/gui/configWizard.py:393 msgid "What kind of machine do you have:" msgstr "" #: Cura/gui/configWizard.py:408 msgid "Other (Ex: RepRap, MakerBot, Witbox)" msgstr "" #: Cura/gui/configWizard.py:411 msgid "" "The collection of anonymous usage information helps with the continued " "improvement of Cura." msgstr "" #: Cura/gui/configWizard.py:412 msgid "" "This does NOT submit your models online nor gathers any privacy related " "information." msgstr "" #: Cura/gui/configWizard.py:413 msgid "Submit anonymous usage information:" msgstr "" #: Cura/gui/configWizard.py:414 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats" msgstr "" #: Cura/gui/configWizard.py:531 msgid "Select upgraded parts you have" msgstr "" #: Cura/gui/configWizard.py:532 msgid "" "To assist you in having better default settings for your Ultimaker\n" "Cura would like to know which upgrades you have in your machine." msgstr "" #: Cura/gui/configWizard.py:534 msgid "Extruder drive upgrade" msgstr "" #: Cura/gui/configWizard.py:535 msgid "Heated printer bed (kit)" msgstr "" #: Cura/gui/configWizard.py:536 msgid "Heated printer bed (self built)" msgstr "" #: Cura/gui/configWizard.py:537 msgid "Dual extrusion (experimental)" msgstr "" #: Cura/gui/configWizard.py:539 msgid "" "If you have an Ultimaker bought after october 2012 you will have the\n" "Extruder drive upgrade. If you do not have this upgrade,\n" "it is highly recommended to improve reliability." msgstr "" #: Cura/gui/configWizard.py:540 msgid "" "This upgrade can be bought from the Ultimaker webshop\n" "or found on thingiverse as thing:26094" msgstr "" #: Cura/gui/configWizard.py:562 msgid "Upgrade Ultimaker Firmware" msgstr "" #: Cura/gui/configWizard.py:563 msgid "" "Firmware is the piece of software running directly on your 3D printer.\n" "This firmware controls the step motors, regulates the temperature\n" "and ultimately makes your printer work." msgstr "" #: Cura/gui/configWizard.py:565 msgid "" "The firmware shipping with new Ultimakers works, but upgrades\n" "have been made to make better prints, and make calibration easier." msgstr "" #: Cura/gui/configWizard.py:567 msgid "" "Cura requires these new features and thus\n" "your firmware will most likely need to be upgraded.\n" "You will get the chance to do so now." msgstr "" #: Cura/gui/configWizard.py:573 msgid "Do not upgrade to this firmware if:" msgstr "" #: Cura/gui/configWizard.py:574 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)" msgstr "" #: Cura/gui/configWizard.py:575 msgid "* Build your own heated bed" msgstr "" #: Cura/gui/configWizard.py:576 msgid "* Have other changes in the firmware" msgstr "" #: Cura/gui/configWizard.py:596 msgid "Ultimaker Checkup" msgstr "" #: Cura/gui/configWizard.py:610 msgid "" "It is a good idea to do a few sanity checks now on your Ultimaker.\n" "You can skip these if you know your machine is functional." msgstr "" #: Cura/gui/configWizard.py:611 msgid "Run checks" msgstr "" #: Cura/gui/configWizard.py:611 msgid "Skip checks" msgstr "" #: Cura/gui/configWizard.py:615 msgid "Communication:" msgstr "" #: Cura/gui/configWizard.py:616 msgid "Temperature:" msgstr "" #: Cura/gui/configWizard.py:617 msgid "Endstops:" msgstr "" #: Cura/gui/configWizard.py:622 msgid "Show error log" msgstr "" #: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093 #: Cura/gui/configWizard.py:1312 msgid "Connecting to machine." msgstr "" #: Cura/gui/configWizard.py:677 msgid "Cooldown before temperature check." msgstr "" #: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690 msgid "Checking the heater and temperature sensor." msgstr "" #: Cura/gui/configWizard.py:701 msgid "Please make sure none of the endstops are pressed." msgstr "" #: Cura/gui/configWizard.py:714 msgid "Temperature measurement FAILED!" msgstr "" #: Cura/gui/configWizard.py:719 #, python-format msgid "Head temperature: %d" msgstr "" #: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735 #, python-format msgid "Communication State: %s" msgstr "" #: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270 #: Cura/gui/configWizard.py:1488 msgid "Failed to establish connection with the printer." msgstr "" #: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784 msgid "Please press the left X endstop." msgstr "" #: Cura/gui/configWizard.py:779 msgid "Please press the right X endstop." msgstr "" #: Cura/gui/configWizard.py:789 msgid "Please press the front Y endstop." msgstr "" #: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804 msgid "Please press the top Z endstop." msgstr "" #: Cura/gui/configWizard.py:799 msgid "Please press the back Y endstop." msgstr "" #: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824 msgid "Checkup finished" msgstr "" #: Cura/gui/configWizard.py:818 msgid "Please press the bottom Z endstop." msgstr "" #: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862 msgid "Ultimaker Calibration" msgstr "" #: Cura/gui/configWizard.py:867 msgid "Calibrating the Steps Per E requires some manual actions." msgstr "" #: Cura/gui/configWizard.py:868 msgid "First remove any filament from your machine." msgstr "" #: Cura/gui/configWizard.py:869 msgid "" "Next put in your filament so the tip is aligned with the\n" "top of the extruder drive." msgstr "" #: Cura/gui/configWizard.py:870 msgid "We'll push the filament 100mm" msgstr "" #: Cura/gui/configWizard.py:871 msgid "Extrude 100mm filament" msgstr "" #: Cura/gui/configWizard.py:872 msgid "" "Now measure the amount of extruded filament:\n" "(this can be more or less then 100mm)" msgstr "" #: Cura/gui/configWizard.py:873 msgid "Save" msgstr "" #: Cura/gui/configWizard.py:874 msgid "This results in the following steps per E:" msgstr "" #: Cura/gui/configWizard.py:876 msgid "You can repeat these steps to get better calibration." msgstr "" #: Cura/gui/configWizard.py:879 msgid "" "If you still have filament in your printer which needs\n" "heat to remove, press the heat up button below:" msgstr "" #: Cura/gui/configWizard.py:880 msgid "Heatup for filament removal" msgstr "" #: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939 msgid "" "Error: Failed to open serial port to machine\n" "If this keeps happening, try disconnecting and reconnecting the USB cable" msgstr "" #: Cura/gui/configWizard.py:979 msgid "Ultimaker2" msgstr "" #: Cura/gui/configWizard.py:980 msgid "Congratulations on your the purchase of your brand new Ultimaker2." msgstr "" #: Cura/gui/configWizard.py:981 msgid "Cura is now ready to be used with your Ultimaker2." msgstr "" #: Cura/gui/configWizard.py:986 msgid "Lulzbot TAZ/Mini" msgstr "" #: Cura/gui/configWizard.py:987 msgid "Cura is now ready to be used with your Lulzbot." msgstr "" #: Cura/gui/configWizard.py:992 msgid "Configuration Wizard" msgstr "" #: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501 msgid "Bed leveling wizard" msgstr "" #: Cura/gui/configWizard.py:1055 msgid "This wizard will help you in leveling your printer bed" msgstr "" #: Cura/gui/configWizard.py:1057 msgid "It will do the following steps" msgstr "" #: Cura/gui/configWizard.py:1058 msgid "* Move the printer head to each corner" msgstr "" #: Cura/gui/configWizard.py:1059 msgid " and let you adjust the height of the bed to the nozzle" msgstr "" #: Cura/gui/configWizard.py:1060 msgid "* Print a line around the bed to check if it is level" msgstr "" #: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288 msgid "Connect to printer" msgstr "" #: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294 msgid "Resume" msgstr "" #: Cura/gui/configWizard.py:1068 msgid "Up 0.2mm" msgstr "" #: Cura/gui/configWizard.py:1068 msgid "Down 0.2mm" msgstr "" #: Cura/gui/configWizard.py:1069 msgid "Up 10mm" msgstr "" #: Cura/gui/configWizard.py:1069 msgid "Down 10mm" msgstr "" #: Cura/gui/configWizard.py:1129 msgid "Homing printer..." msgstr "" #: Cura/gui/configWizard.py:1139 msgid "Moving head to back center..." msgstr "" #: Cura/gui/configWizard.py:1146 msgid "Moving head to back left corner..." msgstr "" #: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168 msgid "Moving head to front right corner..." msgstr "" #: Cura/gui/configWizard.py:1161 msgid "Moving head to back right corner..." msgstr "" #: Cura/gui/configWizard.py:1175 msgid "Heating up printer..." msgstr "" #: Cura/gui/configWizard.py:1182 msgid "Printing a square on the printer bed at 0.3mm height." msgstr "" #: Cura/gui/configWizard.py:1222 msgid "" "Adjust the front left screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1227 msgid "" "Adjust the back screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1229 msgid "" "Adjust the back left screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1233 msgid "" "Adjust the back right screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1237 msgid "" "Adjust the front right screw of your printer bed\n" "So the nozzle just hits the bed." msgstr "" #: Cura/gui/configWizard.py:1241 #, python-format msgid "Heating up printer: %d/%d" msgstr "" #: Cura/gui/configWizard.py:1243 msgid "" "The printer is hot now. Please insert some PLA filament into the printer." msgstr "" #: Cura/gui/configWizard.py:1252 msgid "Use the up/down buttons to move the bed and adjust your Z endstop." msgstr "" #: Cura/gui/configWizard.py:1264 msgid "" "Calibration finished.\n" "The squares on the bed should slightly touch each other." msgstr "" #: Cura/gui/configWizard.py:1285 msgid "" "This wizard will help you in calibrating the printer head offsets of your " "dual extrusion machine" msgstr "" #: Cura/gui/configWizard.py:1318 msgid "Printing initial calibration cross" msgstr "" #: Cura/gui/configWizard.py:1366 msgid "" "Please measure the distance between the horizontal lines in millimeters." msgstr "" #: Cura/gui/configWizard.py:1376 msgid "Printing the fine calibration lines." msgstr "" #: Cura/gui/configWizard.py:1431 msgid "" "Which horizontal line number lays perfect on top of each other? Front most " "line is zero." msgstr "" #: Cura/gui/configWizard.py:1442 #, python-format msgid "Calibration finished. Offsets are: %s %s" msgstr "" #: Cura/gui/configWizard.py:1455 msgid "Please load both extruders with PLA." msgstr "" #: Cura/gui/configWizard.py:1464 msgid "Homing printer and heating up both extruders." msgstr "" #: Cura/gui/configWizard.py:1474 msgid "Please measure the distance between the vertical lines in millimeters." msgstr "" #: Cura/gui/configWizard.py:1481 msgid "" "Which vertical line number lays perfect on top of each other? Leftmost line " "is zero." msgstr "" #: Cura/gui/configWizard.py:1530 msgid "Head offset wizard" msgstr "" #: Cura/gui/expertConfig.py:27 msgid "Expert config" msgstr "" #: Cura/gui/firmwareInstall.py:64 msgid "" "I am sorry, but Cura does not ship with a default firmware for your machine " "configuration." msgstr "" #: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69 #: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543 msgid "Firmware update" msgstr "" #: Cura/gui/firmwareInstall.py:69 msgid "" "Cura only supports firmware updates for ATMega2560 based hardware.\n" "So updating your RepRap with Cura might or might not work." msgstr "" #: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181 msgid "OK" msgstr "" #: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265 msgid "Reading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267 msgid "Connecting to machine..." msgstr "" #: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271 msgid "" "Please connect the printer to\n" "your computer with the USB cable." msgstr "" #: Cura/gui/firmwareInstall.py:123 msgid "" "Failed to find machine for firmware upgrade\n" "Is your machine connected to the PC?" msgstr "" #: Cura/gui/firmwareInstall.py:130 msgid "" "Failed to install firmware:\n" "This firmware is not compatible with this machine.\n" "Trying to install UMO firmware on an UM2 or UMO+?" msgstr "" #: Cura/gui/firmwareInstall.py:136 msgid "" "Failed to install firmware:\n" "This firmware is not compatible with this machine.\n" "Trying to install UM2 or UMO+ firmware on an UMO?" msgstr "" #: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293 msgid "Uploading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296 #, python-format msgid "" "Done!\n" "Installed firmware: %s" msgstr "" #: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298 msgid "Failed to write firmware.\n" msgstr "" #: Cura/gui/firmwareInstall.py:290 msgid "Failed to connect to programmer.\n" msgstr "" #: Cura/gui/mainWindow.py:72 msgid "Load model file...\tCTRL+L" msgstr "" #: Cura/gui/mainWindow.py:74 msgid "Save model...\tCTRL+S" msgstr "" #: Cura/gui/mainWindow.py:76 msgid "Reload platform\tF5" msgstr "" #: Cura/gui/mainWindow.py:78 msgid "Clear platform" msgstr "" #: Cura/gui/mainWindow.py:82 msgid "Print...\tCTRL+P" msgstr "" #: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279 msgid "Save GCode..." msgstr "" #: Cura/gui/mainWindow.py:86 msgid "Show slice engine log..." msgstr "" #: Cura/gui/mainWindow.py:90 msgid "Open Profile..." msgstr "" #: Cura/gui/mainWindow.py:93 msgid "Save Profile..." msgstr "" #: Cura/gui/mainWindow.py:96 msgid "Load Profile from GCode..." msgstr "" #: Cura/gui/mainWindow.py:100 msgid "Reset Profile to default" msgstr "" #: Cura/gui/mainWindow.py:105 msgid "Preferences...\tCTRL+," msgstr "" #: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469 msgid "Machine settings..." msgstr "" #: Cura/gui/mainWindow.py:113 msgid "Recent Model Files" msgstr "" #: Cura/gui/mainWindow.py:120 msgid "Recent Profile Files" msgstr "" #: Cura/gui/mainWindow.py:126 msgid "Quit" msgstr "" #: Cura/gui/mainWindow.py:128 msgid "File" msgstr "" #: Cura/gui/mainWindow.py:136 msgid "Minecraft map import..." msgstr "" #: Cura/gui/mainWindow.py:140 msgid "PID Debugger..." msgstr "" #: Cura/gui/mainWindow.py:142 msgid "Auto Firmware Update..." msgstr "" #: Cura/gui/mainWindow.py:145 msgid "Copy profile to clipboard" msgstr "" #: Cura/gui/mainWindow.py:149 msgid "Print all at once" msgstr "" #: Cura/gui/mainWindow.py:151 msgid "Print one at a time" msgstr "" #: Cura/gui/mainWindow.py:158 msgid "Tools" msgstr "" #: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183 msgid "Machine" msgstr "" #: Cura/gui/mainWindow.py:167 msgid "Switch to quickprint..." msgstr "" #: Cura/gui/mainWindow.py:171 msgid "Switch to full settings..." msgstr "" #: Cura/gui/mainWindow.py:176 msgid "Open expert settings...\tCTRL+E" msgstr "" #: Cura/gui/mainWindow.py:180 msgid "Run bed leveling wizard..." msgstr "" #: Cura/gui/mainWindow.py:182 msgid "Run head offset wizard..." msgstr "" #: Cura/gui/mainWindow.py:185 msgid "Expert" msgstr "" #: Cura/gui/mainWindow.py:188 msgid "Online documentation..." msgstr "" #: Cura/gui/mainWindow.py:190 msgid "Report a problem..." msgstr "" #: Cura/gui/mainWindow.py:192 msgid "Check for update..." msgstr "" #: Cura/gui/mainWindow.py:194 msgid "Open YouMagine website..." msgstr "" #: Cura/gui/mainWindow.py:196 msgid "About Cura..." msgstr "" #: Cura/gui/mainWindow.py:198 msgid "Help" msgstr "" #: Cura/gui/mainWindow.py:379 msgid "" "For \"One at a time\" printing, you need to have entered the correct head " "size and gantry height in the machine settings" msgstr "" #: Cura/gui/mainWindow.py:379 msgid "One at a time warning" msgstr "" #: Cura/gui/mainWindow.py:467 msgid "Add new machine..." msgstr "" #: Cura/gui/mainWindow.py:475 msgid "Install default firmware..." msgstr "" #: Cura/gui/mainWindow.py:478 msgid "Install custom firmware..." msgstr "" #: Cura/gui/mainWindow.py:482 msgid "Select profile file to load" msgstr "" #: Cura/gui/mainWindow.py:494 msgid "Select gcode file to load profile from" msgstr "" #: Cura/gui/mainWindow.py:509 msgid "" "No profile found in GCode file.\n" "This feature only works with GCode files made by Cura 12.07 or newer." msgstr "" #: Cura/gui/mainWindow.py:509 msgid "Profile load error" msgstr "" #: Cura/gui/mainWindow.py:513 msgid "Select profile file to save" msgstr "" #: Cura/gui/mainWindow.py:523 msgid "" "This will reset all profile settings to defaults.\n" "Unless you have saved your current profile, all settings will be lost!\n" "Do you really want to reset?" msgstr "" #: Cura/gui/mainWindow.py:523 msgid "Profile reset" msgstr "" #: Cura/gui/mainWindow.py:543 msgid "" "Warning: Installing a custom firmware does not guarantee that you machine " "will function correctly, and could damage your machine." msgstr "" #: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587 msgid "Open firmware to upload" msgstr "" #: Cura/gui/mainWindow.py:616 msgid "You are running the latest version of Cura!" msgstr "" #: Cura/gui/mainWindow.py:616 msgid "Awesome!" msgstr "" #: Cura/gui/mainWindow.py:661 msgid "Basic" msgstr "" #: Cura/gui/mainWindow.py:665 msgid "Advanced" msgstr "" #: Cura/gui/mainWindow.py:671 msgid "Plugins" msgstr "" #: Cura/gui/pluginPanel.py:31 msgid "Plugins:" msgstr "" #: Cura/gui/pluginPanel.py:35 msgid "Open plugin location" msgstr "" #: Cura/gui/pluginPanel.py:36 msgid "Enabled plugins" msgstr "" #: Cura/gui/pluginPanel.py:159 msgid "You need to select a plugin before you can add anything." msgstr "" #: Cura/gui/pluginPanel.py:159 msgid "Error: no plugin selected" msgstr "" #: Cura/gui/preferencesDialog.py:14 msgid "Preferences" msgstr "" #: Cura/gui/preferencesDialog.py:28 msgid "Print window" msgstr "" #: Cura/gui/preferencesDialog.py:31 msgid "Colours" msgstr "" #: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489 msgid "Language" msgstr "" #: Cura/gui/preferencesDialog.py:40 msgid "Filament settings" msgstr "" #: Cura/gui/preferencesDialog.py:50 msgid "Cura settings" msgstr "" #: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84 msgid "Machine settings" msgstr "" #: Cura/gui/preferencesDialog.py:95 msgid "Printer head size" msgstr "" #: Cura/gui/preferencesDialog.py:103 #, python-format msgid "Extruder %d" msgstr "" #: Cura/gui/preferencesDialog.py:107 msgid "Communication settings" msgstr "" #: Cura/gui/preferencesDialog.py:119 msgid "Ok" msgstr "" #: Cura/gui/preferencesDialog.py:123 msgid "Add new machine" msgstr "" #: Cura/gui/preferencesDialog.py:127 msgid "Remove machine" msgstr "" #: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167 msgid "Change machine name" msgstr "" #: Cura/gui/preferencesDialog.py:153 msgid "Cannot remove the last machine configuration in Cura" msgstr "" #: Cura/gui/preferencesDialog.py:153 msgid "Machine remove error" msgstr "" #: Cura/gui/preferencesDialog.py:167 msgid "Enter the new name:" msgstr "" #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312 #, python-format msgid "Printing on %s" msgstr "" #: Cura/gui/printWindow.py:324 msgid "" "Your computer is running on battery power.\n" "Connect your computer to AC power or your print might not finish." msgstr "" #: Cura/gui/printWindow.py:334 msgid "" "InfoLine from printer connection\n" "InfoLine from dialog\n" "Extra line\n" "More lines for layout\n" "More lines for layout\n" "More lines for layout" msgstr "" #: Cura/gui/printWindow.py:336 msgid "Connect" msgstr "" #: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65 msgid "Print" msgstr "" #: Cura/gui/printWindow.py:339 msgid "Pause" msgstr "" #: Cura/gui/printWindow.py:340 msgid "Cancel print" msgstr "" #: Cura/gui/printWindow.py:341 msgid "Error log" msgstr "" #: Cura/gui/sceneView.py:64 msgid "Load" msgstr "" #: Cura/gui/sceneView.py:69 msgid "Rotate" msgstr "" #: Cura/gui/sceneView.py:70 msgid "Scale" msgstr "" #: Cura/gui/sceneView.py:71 msgid "Mirror" msgstr "" #: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76 msgid "Reset" msgstr "" #: Cura/gui/sceneView.py:74 msgid "Lay flat" msgstr "" #: Cura/gui/sceneView.py:77 msgid "To max" msgstr "" #: Cura/gui/sceneView.py:79 msgid "Mirror X" msgstr "" #: Cura/gui/sceneView.py:80 msgid "Mirror Y" msgstr "" #: Cura/gui/sceneView.py:81 msgid "Mirror Z" msgstr "" #: Cura/gui/sceneView.py:89 msgid "Scale X" msgstr "" #: Cura/gui/sceneView.py:91 msgid "Scale Y" msgstr "" #: Cura/gui/sceneView.py:93 msgid "Scale Z" msgstr "" #: Cura/gui/sceneView.py:95 msgid "Size X (mm)" msgstr "" #: Cura/gui/sceneView.py:97 msgid "Size Y (mm)" msgstr "" #: Cura/gui/sceneView.py:99 msgid "Size Z (mm)" msgstr "" #: Cura/gui/sceneView.py:101 msgid "Uniform scale" msgstr "" #: Cura/gui/sceneView.py:104 msgid "View mode" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Normal" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Overhang" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Transparent" msgstr "" #: Cura/gui/sceneView.py:104 msgid "X-Ray" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Layers" msgstr "" #: Cura/gui/sceneView.py:106 msgid "Share on YouMagine" msgstr "" #: Cura/gui/sceneView.py:204 msgid "Open 3D model" msgstr "" #: Cura/gui/sceneView.py:229 msgid "Save 3D model" msgstr "" #: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915 #, python-format msgid "Print with %s" msgstr "" #: Cura/gui/sceneView.py:280 msgid "Slice engine log..." msgstr "" #: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918 msgid "Save toolpath" msgstr "" #: Cura/gui/sceneView.py:352 msgid "The slicing engine reported the following" msgstr "" #: Cura/gui/sceneView.py:352 msgid "Engine log..." msgstr "" #: Cura/gui/sceneView.py:491 msgid "How many copies do you want?" msgstr "" #: Cura/gui/sceneView.py:491 msgid "Number of copies" msgstr "" #: Cura/gui/sceneView.py:491 msgid "Multiply" msgstr "" #: Cura/gui/sceneView.py:781 msgid "Center on platform" msgstr "" #: Cura/gui/sceneView.py:782 msgid "Delete object" msgstr "" #: Cura/gui/sceneView.py:783 msgid "Multiply object" msgstr "" #: Cura/gui/sceneView.py:784 msgid "Split object into parts" msgstr "" #: Cura/gui/sceneView.py:786 msgid "Dual extrusion merge" msgstr "" #: Cura/gui/sceneView.py:788 msgid "Delete all objects" msgstr "" #: Cura/gui/sceneView.py:789 msgid "Reload all objects" msgstr "" #: Cura/gui/sceneView.py:912 msgid "Toolpath to SD" msgstr "" #: Cura/gui/sceneView.py:1206 msgid "Overhang view not working due to lack of OpenGL shaders support." msgstr "" #: Cura/gui/simpleMode.py:19 msgid "High quality print" msgstr "" #: Cura/gui/simpleMode.py:20 msgid "Normal quality print" msgstr "" #: Cura/gui/simpleMode.py:21 msgid "Fast low quality print" msgstr "" #: Cura/gui/simpleMode.py:22 msgid "Thin walled cup or vase" msgstr "" #: Cura/gui/simpleMode.py:32 msgid "Print support structure" msgstr "" #: Cura/gui/simpleMode.py:37 msgid "Select a quickprint profile:" msgstr "" #: Cura/gui/simpleMode.py:47 msgid "Material:" msgstr "" #: Cura/gui/simpleMode.py:51 msgid "Diameter:" msgstr "" #: Cura/gui/simpleMode.py:57 msgid "Other:" msgstr "" #: Cura/gui/simpleMode.py:85 msgid "Exterior Only" msgstr "" #: Cura/gui/tools/imageToMesh.py:28 msgid "Height (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:32 msgid "Base (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:36 msgid "Width (mm)" msgstr "" #: Cura/gui/tools/imageToMesh.py:40 msgid "Depth (mm)" msgstr "" #: Cura/gui/tools/projector.py:42 msgid "Edit" msgstr "" #: Cura/gui/tools/projector.py:43 msgid "Rectangle" msgstr "" #: Cura/gui/tools/projector.py:44 msgid "Circle" msgstr "" #: Cura/gui/tools/projector.py:45 msgid "Draw curves" msgstr "" #: Cura/gui/tools/youmagineGui.py:78 msgid "Checking token" msgstr "" #: Cura/gui/tools/youmagineGui.py:82 msgid "Failed to contact YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153 msgid "YouMagine error." msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "Cura is now authorized to share on YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "YouMagine." msgstr "" #: Cura/gui/tools/youmagineGui.py:112 msgid "Creating new design on YouMagine..." msgstr "" #: Cura/gui/tools/youmagineGui.py:116 msgid "Failed to create a design, nothing uploaded!" msgstr "" #: Cura/gui/tools/youmagineGui.py:120 #, python-format msgid "Building model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:131 #, python-format msgid "Uploading model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 #, python-format msgid "Failed to upload %s!" msgstr "" #: Cura/gui/tools/youmagineGui.py:137 #, python-format msgid "Uploading file %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:145 #, python-format msgid "Uploading image %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:153 msgid "Failed to upload snapshot!" msgstr "" #: Cura/gui/tools/youmagineGui.py:158 msgid "Publishing design..." msgstr "" #: Cura/gui/tools/youmagineGui.py:230 msgid "Request authorization from YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:231 msgid "Paste token here" msgstr "" #: Cura/gui/tools/youmagineGui.py:237 msgid "" "To share your designs on YouMagine\n" "you need an account on YouMagine.com\n" "and authorize Cura to access your account." msgstr "" #: Cura/gui/tools/youmagineGui.py:239 msgid "" "This will open a browser window where you can\n" "authorize Cura to access your YouMagine account.\n" "You can revoke access at any time\n" "from YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:274 msgid "Design name" msgstr "" #: Cura/gui/tools/youmagineGui.py:278 msgid "Publish after upload" msgstr "" #: Cura/gui/tools/youmagineGui.py:279 msgid "Share!" msgstr "" #: Cura/gui/tools/youmagineGui.py:287 msgid "Add..." msgstr "" #: Cura/gui/tools/youmagineGui.py:289 msgid "Webcam..." msgstr "" #: Cura/gui/tools/youmagineGui.py:299 msgid "" "Directly publish the design after uploading.\n" "Without this check the design will not be public\n" "until you publish it yourself on YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:305 msgid "Design name:" msgstr "" #: Cura/gui/tools/youmagineGui.py:307 msgid "Description:" msgstr "" #: Cura/gui/tools/youmagineGui.py:309 msgid "Category:" msgstr "" #: Cura/gui/tools/youmagineGui.py:311 msgid "License:" msgstr "" #: Cura/gui/tools/youmagineGui.py:314 msgid "Images:" msgstr "" #: Cura/gui/tools/youmagineGui.py:317 msgid "Related design files:" msgstr "" #: Cura/gui/tools/youmagineGui.py:340 msgid "The name cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344 msgid "New design error." msgstr "" #: Cura/gui/tools/youmagineGui.py:344 msgid "The description cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:370 msgid "No webcam found on your system" msgstr "" #: Cura/gui/tools/youmagineGui.py:370 msgid "Webcam error" msgstr "" #: Cura/gui/util/engineResultView.py:168 #, python-format msgid "Loading toolpath for visualization (%d%%)" msgstr "" #: Cura/gui/util/openglGui.py:242 msgid "An error has occurred during the 3D view drawing." msgstr "" #: Cura/gui/util/openglGui.py:250 msgid "3D window error" msgstr "" #: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180 #: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210 #: Cura/util/profile.py:212 msgid "Quality" msgstr "" #: Cura/util/profile.py:178 msgid "Layer height (mm)" msgstr "" #: Cura/util/profile.py:178 msgid "" "Layer height in millimeters.\n" "This is the most important setting to determine the quality of your print. " "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to " "0.25mm with an Ultimaker for very fast prints at low quality." msgstr "" #: Cura/util/profile.py:179 msgid "Shell thickness (mm)" msgstr "" #: Cura/util/profile.py:179 msgid "" "Thickness of the outside shell in the horizontal direction.\n" "This is used in combination with the nozzle size to define the number\n" "of perimeter lines and the thickness of those perimeter lines." msgstr "" #: Cura/util/profile.py:180 msgid "Enable retraction" msgstr "" #: Cura/util/profile.py:180 msgid "" "Retract the filament when the nozzle is moving over a none-printed area. " "Details about the retraction can be configured in the advanced tab." msgstr "" #: Cura/util/profile.py:181 Cura/util/profile.py:182 msgid "Fill" msgstr "" #: Cura/util/profile.py:181 msgid "Bottom/Top thickness (mm)" msgstr "" #: Cura/util/profile.py:181 msgid "" "This controls the thickness of the bottom and top layers, the amount of " "solid layers put down is calculated by the layer thickness and this value.\n" "Having this value a multiple of the layer thickness makes sense. And keep it " "near your wall thickness to make an evenly strong part." msgstr "" #: Cura/util/profile.py:182 msgid "Fill Density (%)" msgstr "" #: Cura/util/profile.py:182 msgid "" "This controls how densely filled the insides of your print will be. For a " "solid part use 100%, for an empty part use 0%. A value around 20% is usually " "enough.\n" "This won't affect the outside of the print and only adjusts how strong the " "part becomes." msgstr "" #: Cura/util/profile.py:183 msgid "" "The nozzle size is very important, this is used to calculate the line width " "of the infill, and used to calculate the amount of outside wall lines and " "thickness for the wall thickness you entered in the print settings." msgstr "" #: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186 #: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189 msgid "Speed and Temperature" msgstr "" #: Cura/util/profile.py:184 msgid "Print speed (mm/s)" msgstr "" #: Cura/util/profile.py:184 msgid "" "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/" "s, but for good quality prints you want to print slower. Printing speed " "depends on a lot of factors. So you will be experimenting with optimal " "settings for this." msgstr "" #: Cura/util/profile.py:185 msgid "Printing temperature (C)" msgstr "" #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187 #: Cura/util/profile.py:188 msgid "" "Temperature used for printing. Set at 0 to pre-heat yourself.\n" "For PLA a value of 210C is usually used.\n" "For ABS a value of 230C or higher is required." msgstr "" #: Cura/util/profile.py:186 msgid "2nd nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:187 msgid "3th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:188 msgid "4th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:189 msgid "Bed temperature (C)" msgstr "" #: Cura/util/profile.py:189 msgid "" "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself." msgstr "" #: Cura/util/profile.py:190 Cura/util/profile.py:191 msgid "None" msgstr "" #: Cura/util/profile.py:190 msgid "Touching buildplate" msgstr "" #: Cura/util/profile.py:190 msgid "Everywhere" msgstr "" #: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192 #: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234 #: Cura/util/profile.py:235 Cura/util/profile.py:236 msgid "Support" msgstr "" #: Cura/util/profile.py:190 msgid "Support type" msgstr "" #: Cura/util/profile.py:190 msgid "" "Type of support structure build.\n" "\"Touching buildplate\" is the most commonly used support setting.\n" "\n" "None does not do any support.\n" "Touching buildplate only creates support where the support structure will " "touch the build platform.\n" "Everywhere creates support even on top of parts of the model." msgstr "" #: Cura/util/profile.py:191 Cura/util/profile.py:240 msgid "Brim" msgstr "" #: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242 #: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245 #: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248 #: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251 msgid "Raft" msgstr "" #: Cura/util/profile.py:191 msgid "Platform adhesion type" msgstr "" #: Cura/util/profile.py:191 msgid "" "Different options that help in preventing corners from lifting due to " "warping.\n" "Brim adds a single layer thick flat area around your object which is easy to " "cut off afterwards, and it is the recommended option.\n" "Raft adds a thick raster below the object and a thin interface between this " "and your object.\n" "(Note that enabling the brim or raft disables the skirt)" msgstr "" #: Cura/util/profile.py:192 msgid "Both" msgstr "" #: Cura/util/profile.py:192 msgid "First extruder" msgstr "" #: Cura/util/profile.py:192 msgid "Second extruder" msgstr "" #: Cura/util/profile.py:192 msgid "Support dual extrusion" msgstr "" #: Cura/util/profile.py:192 msgid "" "Which extruder to use for support material, for break-away support you can " "use both extruders.\n" "But if one of the materials is more expensive then the other you could " "select an extruder to use for support material. This causes more extruder " "switches.\n" "You can also use the 2nd extruder for soluble support materials." msgstr "" #: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195 msgid "Dual extrusion" msgstr "" #: Cura/util/profile.py:193 msgid "Wipe&prime tower" msgstr "" #: Cura/util/profile.py:193 msgid "" "The wipe-tower is a tower printed on every layer when switching between " "nozzles.\n" "The old nozzle is wiped off on the tower before the new nozzle is used to " "print the 2nd color." msgstr "" #: Cura/util/profile.py:194 msgid "Wipe&prime tower volume per layer (mm3)" msgstr "" #: Cura/util/profile.py:194 msgid "" "The amount of material put in the wipe/prime tower.\n" "This is done in volume because in general you want to extrude a\n" "certain amount of volume to get the extruder going, independent on the layer " "height.\n" "This means that with thinner layers, your tower gets bigger." msgstr "" #: Cura/util/profile.py:195 msgid "Ooze shield" msgstr "" #: Cura/util/profile.py:195 msgid "" "The ooze shield is a 1 line thick shell around the object which stands a few " "mm from the object.\n" "This shield catches any oozing from the unused nozzle in dual-extrusion." msgstr "" #: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198 #: Cura/util/profile.py:199 Cura/util/profile.py:200 msgid "Filament" msgstr "" #: Cura/util/profile.py:196 msgid "Diameter (mm)" msgstr "" #: Cura/util/profile.py:196 msgid "" "Diameter of your filament, as accurately as possible.\n" "If you cannot measure this value you will have to calibrate it, a higher " "number means less extrusion, a smaller number generates more extrusion." msgstr "" #: Cura/util/profile.py:197 msgid "Diameter2 (mm)" msgstr "" #: Cura/util/profile.py:197 msgid "" "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:198 msgid "Diameter3 (mm)" msgstr "" #: Cura/util/profile.py:198 msgid "" "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:199 msgid "Diameter4 (mm)" msgstr "" #: Cura/util/profile.py:199 msgid "" "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:200 msgid "Flow (%)" msgstr "" #: Cura/util/profile.py:200 msgid "" "Flow compensation, the amount of material extruded is multiplied by this " "value" msgstr "" #: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203 #: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206 #: Cura/util/profile.py:207 msgid "Retraction" msgstr "" #: Cura/util/profile.py:201 msgid "Speed (mm/s)" msgstr "" #: Cura/util/profile.py:201 msgid "" "Speed at which the filament is retracted, a higher retraction speed works " "better. But a very high retraction speed can lead to filament grinding." msgstr "" #: Cura/util/profile.py:202 msgid "Distance (mm)" msgstr "" #: Cura/util/profile.py:202 msgid "" "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm " "seems to generate good results." msgstr "" #: Cura/util/profile.py:203 msgid "Dual extrusion switch amount (mm)" msgstr "" #: Cura/util/profile.py:203 msgid "" "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for " "no retraction at all. A value of 16.0mm seems to generate good results." msgstr "" #: Cura/util/profile.py:204 msgid "Minimum travel (mm)" msgstr "" #: Cura/util/profile.py:204 msgid "" "Minimum amount of travel needed for a retraction to happen at all. To make " "sure you do not get a lot of retractions in a small area." msgstr "" #: Cura/util/profile.py:205 msgid "Enable combing" msgstr "" #: Cura/util/profile.py:205 msgid "" "Combing is the act of avoiding holes in the print for the head to travel " "over. If combing is disabled the printer head moves straight from the start " "point to the end point and it will always retract." msgstr "" #: Cura/util/profile.py:206 msgid "Minimal extrusion before retracting (mm)" msgstr "" #: Cura/util/profile.py:206 msgid "" "The minimal amount of extrusion that needs to be done before retracting " "again if a retraction needs to happen before this minimal is reached the " "retraction is ignored.\n" "This avoids retracting a lot on the same piece of filament which flattens " "the filament and causes grinding issues." msgstr "" #: Cura/util/profile.py:207 msgid "Z hop when retracting (mm)" msgstr "" #: Cura/util/profile.py:207 msgid "" "When a retraction is done, the head is lifted by this amount to travel over " "the print. A value of 0.075 works well. This feature has a lot of positive " "effect on delta towers." msgstr "" #: Cura/util/profile.py:208 msgid "Initial layer thickness (mm)" msgstr "" #: Cura/util/profile.py:208 msgid "" "Layer thickness of the bottom layer. A thicker bottom layer makes sticking " "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as " "the other layers." msgstr "" #: Cura/util/profile.py:209 msgid "Initial layer line width (%)" msgstr "" #: Cura/util/profile.py:209 msgid "" "Extra width factor for the extrusion on the first layer, on some printers " "it's good to have wider extrusion on the first layer to get better bed " "adhesion." msgstr "" #: Cura/util/profile.py:210 msgid "Cut off object bottom (mm)" msgstr "" #: Cura/util/profile.py:210 msgid "" "Sinks the object into the platform, this can be used for objects that do not " "have a flat bottom and thus create a too small first layer." msgstr "" #: Cura/util/profile.py:212 msgid "Dual extrusion overlap (mm)" msgstr "" #: Cura/util/profile.py:212 msgid "" "Add a certain amount of overlapping extrusion on dual-extrusion prints. This " "bonds the different colors together." msgstr "" #: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215 #: Cura/util/profile.py:216 Cura/util/profile.py:217 msgid "Speed" msgstr "" #: Cura/util/profile.py:213 msgid "Travel speed (mm/s)" msgstr "" #: Cura/util/profile.py:213 msgid "" "Speed at which travel moves are done, a well built Ultimaker can reach " "speeds of 250mm/s. But some machines might miss steps then." msgstr "" #: Cura/util/profile.py:214 msgid "Bottom layer speed (mm/s)" msgstr "" #: Cura/util/profile.py:214 msgid "" "Print speed for the bottom layer, you want to print the first layer slower " "so it sticks better to the printer bed." msgstr "" #: Cura/util/profile.py:215 msgid "Infill speed (mm/s)" msgstr "" #: Cura/util/profile.py:215 msgid "" "Speed at which infill parts are printed. If set to 0 then the print speed is " "used for the infill. Printing the infill faster can greatly reduce printing " "time, but this can negatively affect print quality." msgstr "" #: Cura/util/profile.py:216 msgid "Outer shell speed (mm/s)" msgstr "" #: Cura/util/profile.py:216 msgid "" "Speed at which outer shell is printed. If set to 0 then the print speed is " "used. Printing the outer shell at a lower speed improves the final skin " "quality. However, having a large difference between the inner shell speed " "and the outer shell speed will effect quality in a negative way." msgstr "" #: Cura/util/profile.py:217 msgid "Inner shell speed (mm/s)" msgstr "" #: Cura/util/profile.py:217 msgid "" "Speed at which inner shells are printed. If set to 0 then the print speed is " "used. Printing the inner shell faster then the outer shell will reduce " "printing time. It is good to set this somewhere in between the outer shell " "speed and the infill/printing speed." msgstr "" #: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224 #: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227 #: Cura/util/profile.py:228 msgid "Cool" msgstr "" #: Cura/util/profile.py:218 msgid "Minimal layer time (sec)" msgstr "" #: Cura/util/profile.py:218 msgid "" "Minimum time spent in a layer, gives the layer time to cool down before the " "next layer is put on top. If the layer will be placed down too fast the " "printer will slow down to make sure it has spent at least this amount of " "seconds printing this layer." msgstr "" #: Cura/util/profile.py:219 msgid "Enable cooling fan" msgstr "" #: Cura/util/profile.py:219 msgid "" "Enable the cooling fan during the print. The extra cooling from the cooling " "fan is essential during faster prints." msgstr "" #: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223 msgid "Skirt" msgstr "" #: Cura/util/profile.py:221 msgid "Line count" msgstr "" #: Cura/util/profile.py:221 msgid "" "The skirt is a line drawn around the object at the first layer. This helps " "to prime your extruder, and to see if the object fits on your platform.\n" "Setting this to 0 will disable the skirt. Multiple skirt lines can help " "priming your extruder better for small objects." msgstr "" #: Cura/util/profile.py:222 msgid "Start distance (mm)" msgstr "" #: Cura/util/profile.py:222 msgid "" "The distance between the skirt and the first layer.\n" "This is the minimal distance, multiple skirt lines will be put outwards from " "this distance." msgstr "" #: Cura/util/profile.py:223 msgid "Minimal length (mm)" msgstr "" #: Cura/util/profile.py:223 msgid "" "The minimal length of the skirt, if this minimal length is not reached it " "will add more skirt lines to reach this minimal lenght.\n" "Note: If the line count is set to 0 this is ignored." msgstr "" #: Cura/util/profile.py:224 msgid "Fan full on at height (mm)" msgstr "" #: Cura/util/profile.py:224 msgid "" "The height at which the fan is turned on completely. For the layers below " "this the fan speed is scaled linearly with the fan off at layer 0." msgstr "" #: Cura/util/profile.py:225 msgid "Fan speed min (%)" msgstr "" #: Cura/util/profile.py:225 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Minimal fan speed is used if the layer is not slowed down due to cooling." msgstr "" #: Cura/util/profile.py:226 msgid "Fan speed max (%)" msgstr "" #: Cura/util/profile.py:226 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Maximal fan speed is used if the layer is slowed down due to cooling by more " "than 200%." msgstr "" #: Cura/util/profile.py:227 msgid "Minimum speed (mm/s)" msgstr "" #: Cura/util/profile.py:227 msgid "" "The minimal layer time can cause the print to slow down so much it starts to " "ooze. The minimal feedrate protects against this. Even if a print gets " "slowed down it will never be slower than this minimal speed." msgstr "" #: Cura/util/profile.py:228 msgid "Cool head lift" msgstr "" #: Cura/util/profile.py:228 msgid "" "Lift the head if the minimal speed is hit because of cool slowdown, and wait " "the extra time so the minimal layer time is always hit." msgstr "" #: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231 msgid "Infill" msgstr "" #: Cura/util/profile.py:229 msgid "Solid infill top" msgstr "" #: Cura/util/profile.py:229 msgid "" "Create a solid top surface, if set to false the top is filled with the fill " "percentage. Useful for cups/vases." msgstr "" #: Cura/util/profile.py:230 msgid "Solid infill bottom" msgstr "" #: Cura/util/profile.py:230 msgid "" "Create a solid bottom surface, if set to false the bottom is filled with the " "fill percentage. Useful for buildings." msgstr "" #: Cura/util/profile.py:231 msgid "Infill overlap (%)" msgstr "" #: Cura/util/profile.py:231 msgid "" "Amount of overlap between the infill and the walls. There is a slight " "overlap with the walls and the infill so the walls connect firmly to the " "infill." msgstr "" #: Cura/util/profile.py:232 msgid "Structure type" msgstr "" #: Cura/util/profile.py:232 msgid "" "The type of support structure.\n" "Grid is very strong and can come off in 1 piece, however, sometimes it is " "too strong.\n" "Lines are single walled lines that break off one at a time. Which is more " "work to remove, but as it is less strong it does work better on tricky " "prints." msgstr "" #: Cura/util/profile.py:233 msgid "Overhang angle for support (deg)" msgstr "" #: Cura/util/profile.py:233 msgid "" "The minimal angle that overhangs need to have to get support. With 90 degree " "being horizontal and 0 degree being vertical." msgstr "" #: Cura/util/profile.py:234 msgid "Fill amount (%)" msgstr "" #: Cura/util/profile.py:234 #, python-format msgid "" "Amount of infill structure in the support material, less material gives " "weaker support which is easier to remove. 15% seems to be a good average." msgstr "" #: Cura/util/profile.py:235 msgid "Distance X/Y (mm)" msgstr "" #: Cura/util/profile.py:235 msgid "" "Distance of the support material from the print, in the X/Y directions.\n" "0.7mm gives a nice distance from the print so the support does not stick to " "the print." msgstr "" #: Cura/util/profile.py:236 msgid "Distance Z (mm)" msgstr "" #: Cura/util/profile.py:236 msgid "" "Distance from the top/bottom of the support to the print. A small gap here " "makes it easier to remove the support but makes the print a bit uglier.\n" "0.15mm gives a good seperation of the support material." msgstr "" #: Cura/util/profile.py:237 Cura/util/profile.py:238 msgid "Black Magic" msgstr "" #: Cura/util/profile.py:237 msgid "Spiralize the outer contour" msgstr "" #: Cura/util/profile.py:237 msgid "" "Spiralize is smoothing out the Z move of the outer edge. This will create a " "steady Z increase over the whole print. This feature turns a solid object " "into a single walled print with a solid bottom.\n" "This feature used to be called Joris in older versions." msgstr "" #: Cura/util/profile.py:238 msgid "Only follow mesh surface" msgstr "" #: Cura/util/profile.py:238 msgid "" "Only follow the mesh surfaces of the 3D model, do not do anything else. No " "infill, no top/bottom, nothing." msgstr "" #: Cura/util/profile.py:240 msgid "Brim line amount" msgstr "" #: Cura/util/profile.py:240 msgid "" "The amount of lines used for a brim, more lines means a larger brim which " "sticks better, but this also makes your effective print area smaller." msgstr "" #: Cura/util/profile.py:241 msgid "Extra margin (mm)" msgstr "" #: Cura/util/profile.py:241 msgid "" "If the raft is enabled, this is the extra raft area around the object which " "is also rafted. Increasing this margin will create a stronger raft while " "using more material and leaving less area for your print." msgstr "" #: Cura/util/profile.py:242 msgid "Line spacing (mm)" msgstr "" #: Cura/util/profile.py:242 msgid "" "When you are using the raft this is the distance between the centerlines of " "the raft line." msgstr "" #: Cura/util/profile.py:243 msgid "Base thickness (mm)" msgstr "" #: Cura/util/profile.py:243 msgid "" "When you are using the raft this is the thickness of the base layer which is " "put down." msgstr "" #: Cura/util/profile.py:244 msgid "Base line width (mm)" msgstr "" #: Cura/util/profile.py:244 msgid "" "When you are using the raft this is the width of the base layer lines which " "are put down." msgstr "" #: Cura/util/profile.py:245 msgid "Interface thickness (mm)" msgstr "" #: Cura/util/profile.py:245 msgid "" "When you are using the raft this is the thickness of the interface layer " "which is put down." msgstr "" #: Cura/util/profile.py:246 msgid "Interface line width (mm)" msgstr "" #: Cura/util/profile.py:246 msgid "" "When you are using the raft this is the width of the interface layer lines " "which are put down." msgstr "" #: Cura/util/profile.py:247 msgid "Airgap" msgstr "" #: Cura/util/profile.py:247 msgid "Gap between the last layer of the raft the whole print." msgstr "" #: Cura/util/profile.py:248 msgid "First Layer Airgap" msgstr "" #: Cura/util/profile.py:248 msgid "" "Gap between the last layer of the raft and the first printing layer. A small " "gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This " "value is added on top of the 'Airgap' setting." msgstr "" #: Cura/util/profile.py:249 msgid "Surface layers" msgstr "" #: Cura/util/profile.py:249 msgid "" "Amount of surface layers put on top of the raft, these are fully filled " "layers on which the model is printed." msgstr "" #: Cura/util/profile.py:250 msgid "Surface layer thickness (mm)" msgstr "" #: Cura/util/profile.py:250 msgid "Thickness of each surface layer." msgstr "" #: Cura/util/profile.py:251 msgid "Surface layer line width (mm)" msgstr "" #: Cura/util/profile.py:251 msgid "Width of the lines for each surface layer." msgstr "" #: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254 #: Cura/util/profile.py:255 msgid "Fix horrible" msgstr "" #: Cura/util/profile.py:252 msgid "Combine everything (Type-A)" msgstr "" #: Cura/util/profile.py:252 Cura/util/profile.py:253 msgid "" "This expert option adds all parts of the model together. The result is " "usually that internal cavities disappear. Depending on the model this can be " "intended or not. Enabling this option is at your own risk. Type-A is " "dependent on the model normals and tries to keep some internal holes intact. " "Type-B ignores all internal holes and only keeps the outside shape per layer." msgstr "" #: Cura/util/profile.py:253 msgid "Combine everything (Type-B)" msgstr "" #: Cura/util/profile.py:254 msgid "Keep open faces" msgstr "" #: Cura/util/profile.py:254 msgid "" "This expert option keeps all the open bits of the model intact. Normally " "Cura tries to stitch up small holes and remove everything with big holes, " "but this option keeps bits that are not properly part of anything and just " "goes with whatever is left. This option is usually not what you want, but it " "might enable you to slice models otherwise failing to produce proper paths.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:255 msgid "Extensive stitching" msgstr "" #: Cura/util/profile.py:255 msgid "" "Extensive stitching tries to fix up open holes in the model by closing the " "hole with touching polygons. This algorthm is quite expensive and could " "introduce a lot of processing time.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:481 msgid "Save profile on slice" msgstr "" #: Cura/util/profile.py:481 msgid "" "When slicing save the profile as [stl_file]_profile.ini next to the model." msgstr "" #: Cura/util/profile.py:482 msgid "Cost (price/kg)" msgstr "" #: Cura/util/profile.py:482 msgid "Cost of your filament per kg, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:483 msgid "Cost (price/m)" msgstr "" #: Cura/util/profile.py:483 msgid "" "Cost of your filament per meter, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:484 msgid "Auto detect SD card drive" msgstr "" #: Cura/util/profile.py:484 msgid "" "Auto detect the SD card. You can disable this because on some systems " "external hard-drives or USB sticks are detected as SD card." msgstr "" #: Cura/util/profile.py:485 msgid "Check for updates" msgstr "" #: Cura/util/profile.py:485 msgid "Check for newer versions of Cura on startup" msgstr "" #: Cura/util/profile.py:486 msgid "Send usage statistics" msgstr "" #: Cura/util/profile.py:486 msgid "Submit anonymous usage information to improve future versions of Cura" msgstr "" #: Cura/util/profile.py:488 msgid "Density (kg/m3)" msgstr "" #: Cura/util/profile.py:488 msgid "" "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. " "This value is used to estimate the weight if the filament used for the print." msgstr "" #: Cura/util/profile.py:489 msgid "" "Change the language in which Cura runs. Switching language requires a " "restart of Cura" msgstr "" #: Cura/util/profile.py:492 msgid "Model colour" msgstr "" #: Cura/util/profile.py:492 msgid "Display color for first extruder" msgstr "" #: Cura/util/profile.py:493 msgid "Model colour (2)" msgstr "" #: Cura/util/profile.py:493 msgid "Display color for second extruder" msgstr "" #: Cura/util/profile.py:494 msgid "Model colour (3)" msgstr "" #: Cura/util/profile.py:494 msgid "Display color for third extruder" msgstr "" #: Cura/util/profile.py:495 msgid "Model colour (4)" msgstr "" #: Cura/util/profile.py:495 msgid "Display color for forth extruder" msgstr "" #: Cura/util/profile.py:496 msgid "Printing window type" msgstr "" #: Cura/util/profile.py:496 msgid "Select the interface used for USB printing." msgstr "" #: Cura/util/profile.py:508 msgid "Maximum width (mm)" msgstr "" #: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510 msgid "Size of the machine in mm" msgstr "" #: Cura/util/profile.py:509 msgid "Maximum depth (mm)" msgstr "" #: Cura/util/profile.py:510 msgid "Maximum height (mm)" msgstr "" #: Cura/util/profile.py:511 msgid "Machine center 0,0" msgstr "" #: Cura/util/profile.py:511 msgid "" "Machines firmware defines the center of the bed as 0,0 instead of the front " "left corner." msgstr "" #: Cura/util/profile.py:512 msgid "Build area shape" msgstr "" #: Cura/util/profile.py:512 msgid "The shape of machine build area." msgstr "" #: Cura/util/profile.py:514 msgid "" "If you have an heated bed, this enabled heated bed settings (requires " "restart)" msgstr "" #: Cura/util/profile.py:515 msgid "GCode Flavor" msgstr "" #: Cura/util/profile.py:515 msgid "" "Flavor of generated GCode.\n" "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n" "UltiGCode is a variation of the RepRap GCode which puts more settings in the " "machine instead of the slicer.\n" "MakerBot GCode has a few changes in the way GCode is generated, but still " "requires MakerWare to generate to X3G.\n" "BFB style generates RPM based code.\n" "Mach3 uses A,B,C instead of E for extruders." msgstr "" #: Cura/util/profile.py:516 msgid "Extruder count" msgstr "" #: Cura/util/profile.py:516 msgid "Amount of extruders in your machine." msgstr "" #: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521 msgid "Offset X" msgstr "" #: Cura/util/profile.py:517 Cura/util/profile.py:518 msgid "The offset of your secondary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522 msgid "Offset Y" msgstr "" #: Cura/util/profile.py:519 Cura/util/profile.py:520 msgid "The offset of your tertiary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:521 Cura/util/profile.py:522 msgid "The offset of your forth extruder compared to the primary." msgstr "" #: Cura/util/profile.py:523 msgid "E-Steps per 1mm filament" msgstr "" #: Cura/util/profile.py:523 msgid "" "Amount of steps per mm filament extrusion. If set to 0 then this value is " "ignored and the value in your firmware is used." msgstr "" #: Cura/util/profile.py:524 msgid "Serial port" msgstr "" #: Cura/util/profile.py:524 msgid "Serial port to use for communication with the printer" msgstr "" #: Cura/util/profile.py:526 msgid "Baudrate" msgstr "" #: Cura/util/profile.py:526 msgid "" "Speed of the serial port communication\n" "Needs to match your firmware settings\n" "Common values are 250000, 115200, 57600" msgstr "" #: Cura/util/profile.py:529 msgid "Head size towards X min (mm)" msgstr "" #: Cura/util/profile.py:529 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:530 msgid "Head size towards Y min (mm)" msgstr "" #: Cura/util/profile.py:530 Cura/util/profile.py:531 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:531 msgid "Head size towards X max (mm)" msgstr "" #: Cura/util/profile.py:532 msgid "Head size towards Y max (mm)" msgstr "" #: Cura/util/profile.py:532 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:533 msgid "Printer gantry height (mm)" msgstr "" #: Cura/util/profile.py:533 msgid "" "The height of the gantry holding up the printer head. If an object is higher " "then this then you cannot print multiple objects one for one. 60mm for an " "Ultimaker." msgstr "" #: Cura/util/profile.py:535 #, python-format msgid "More flow than 150% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:536 #, python-format msgid "Less flow than 50% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:537 #, python-format msgid "" "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and " "are not recommended." msgstr "" #: Cura/util/profile.py:539 msgid "" "It is highly unlikely that your machine can achieve a printing speed above " "150mm/s" msgstr "" #: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543 #: Cura/util/profile.py:544 msgid "Temperatures above 260C could damage your machine, be careful!" msgstr "" #: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547 #: Cura/util/profile.py:548 msgid "" "Are you sure your filament is that thick? Normal filament is around 3mm or " "1.75mm." msgstr "" #: Cura/util/profile.py:549 msgid "" "It is highly unlikely that your machine can achieve a travel speed above " "300mm/s" msgstr "" #: Cura/util/profile.py:550 #, python-format msgid "" "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad " "results and is not recommended." msgstr "" #: Cura/util/sliceEngine.py:93 #, python-format msgid "%d minutes" msgstr "" #: Cura/util/sliceEngine.py:95 #, python-format msgid "%d hour %d minutes" msgstr "" #: Cura/util/sliceEngine.py:96 #, python-format msgid "%d hours %d minutes" msgstr "" #: Cura/util/sliceEngine.py:101 #, python-format msgid "%0.2f meter %0.0f gram" msgstr ""