# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR David Braam # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2013-10-01 15:37+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=CHARSET\n" "Content-Transfer-Encoding: 8bit\n" #: Cura/gui/app.py:86 Cura/gui/mainWindow.py:524 msgid "A new version of Cura is available, would you like to download?" msgstr "" #: Cura/gui/app.py:86 Cura/gui/mainWindow.py:524 msgid "New version available" msgstr "" #: Cura/gui/configWizard.py:220 msgid "Add new machine wizard" msgstr "" #: Cura/gui/configWizard.py:222 msgid "First time run wizard" msgstr "" #: Cura/gui/configWizard.py:223 msgid "Welcome, and thanks for trying Cura!" msgstr "" #: Cura/gui/configWizard.py:225 msgid "This wizard will help you with the following steps:" msgstr "" #: Cura/gui/configWizard.py:226 msgid "* Configure Cura for your machine" msgstr "" #: Cura/gui/configWizard.py:227 msgid "* Optionally upgrade your firmware" msgstr "" #: Cura/gui/configWizard.py:228 msgid "* Optionally check if your machine is working safely" msgstr "" #: Cura/gui/configWizard.py:229 msgid "* Optionally level your printer bed" msgstr "" #: Cura/gui/configWizard.py:239 msgid "" "RepRap machines are vastly different, and there is no\n" "default configuration in Cura for any of them." msgstr "" #: Cura/gui/configWizard.py:240 msgid "" "If you like a default profile for your machine added,\n" "then make an issue on github." msgstr "" #: Cura/gui/configWizard.py:242 msgid "You will have to manually install Marlin or Sprinter firmware." msgstr "" #: Cura/gui/configWizard.py:244 msgid "Machine name" msgstr "" #: Cura/gui/configWizard.py:245 msgid "Machine width (mm)" msgstr "" #: Cura/gui/configWizard.py:246 msgid "Machine depth (mm)" msgstr "" #: Cura/gui/configWizard.py:247 msgid "Machine height (mm)" msgstr "" #: Cura/gui/configWizard.py:248 Cura/util/profile.py:158 msgid "Nozzle size (mm)" msgstr "" #: Cura/gui/configWizard.py:249 Cura/util/profile.py:367 msgid "Heated bed" msgstr "" #: Cura/gui/configWizard.py:250 msgid "Bed center is 0,0,0 (RoStock)" msgstr "" #: Cura/gui/configWizard.py:270 msgid "Select your machine" msgstr "" #: Cura/gui/configWizard.py:271 msgid "What kind of machine do you have:" msgstr "" #: Cura/gui/configWizard.py:278 msgid "Other (Ex: RepRap)" msgstr "" #: Cura/gui/configWizard.py:281 msgid "" "The collection of anonymous usage information helps with the continued " "improvement of Cura." msgstr "" #: Cura/gui/configWizard.py:282 msgid "" "This does NOT submit your models online nor gathers any privacy related " "information." msgstr "" #: Cura/gui/configWizard.py:283 msgid "Submit anonymous usage information:" msgstr "" #: Cura/gui/configWizard.py:284 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats" msgstr "" #: Cura/gui/configWizard.py:346 msgid "Select upgraded parts you have" msgstr "" #: Cura/gui/configWizard.py:347 msgid "" "To assist you in having better default settings for your Ultimaker\n" "Cura would like to know which upgrades you have in your machine." msgstr "" #: Cura/gui/configWizard.py:349 msgid "Extruder drive upgrade" msgstr "" #: Cura/gui/configWizard.py:350 msgid "Heated printer bed (self built)" msgstr "" #: Cura/gui/configWizard.py:351 msgid "Dual extrusion (experimental)" msgstr "" #: Cura/gui/configWizard.py:353 msgid "" "If you have an Ultimaker bought after october 2012 you will have the\n" "Extruder drive upgrade. If you do not have this upgrade,\n" "it is highly recommended to improve reliability." msgstr "" #: Cura/gui/configWizard.py:354 msgid "" "This upgrade can be bought from the Ultimaker webshop\n" "or found on thingiverse as thing:26094" msgstr "" #: Cura/gui/configWizard.py:373 msgid "Upgrade Ultimaker Firmware" msgstr "" #: Cura/gui/configWizard.py:374 msgid "" "Firmware is the piece of software running directly on your 3D printer.\n" "This firmware controls the step motors, regulates the temperature\n" "and ultimately makes your printer work." msgstr "" #: Cura/gui/configWizard.py:376 msgid "" "The firmware shipping with new Ultimakers works, but upgrades\n" "have been made to make better prints, and make calibration easier." msgstr "" #: Cura/gui/configWizard.py:378 msgid "" "Cura requires these new features and thus\n" "your firmware will most likely need to be upgraded.\n" "You will get the chance to do so now." msgstr "" #: Cura/gui/configWizard.py:383 msgid "Do not upgrade to this firmware if:" msgstr "" #: Cura/gui/configWizard.py:384 msgid "* You have an older machine based on ATMega1280" msgstr "" #: Cura/gui/configWizard.py:385 msgid "* Have other changes in the firmware" msgstr "" #: Cura/gui/configWizard.py:419 msgid "" "It is a good idea to do a few sanity checks now on your Ultimaker.\n" "You can skip these if you know your machine is functional." msgstr "" #: Cura/gui/configWizard.py:420 msgid "Run checks" msgstr "" #: Cura/gui/configWizard.py:420 msgid "Skip checks" msgstr "" #: Cura/gui/configWizard.py:424 msgid "Communication:" msgstr "" #: Cura/gui/configWizard.py:425 msgid "Temperature:" msgstr "" #: Cura/gui/configWizard.py:426 msgid "Endstops:" msgstr "" #: Cura/gui/configWizard.py:431 msgid "Show error log" msgstr "" #: Cura/gui/configWizard.py:465 msgid "Connecting to machine." msgstr "" #: Cura/gui/configWizard.py:486 msgid "Cooldown before temperature check." msgstr "" #: Cura/gui/configWizard.py:492 Cura/gui/configWizard.py:499 msgid "Checking the heater and temperature sensor." msgstr "" #: Cura/gui/configWizard.py:510 msgid "Please make sure none of the endstops are pressed." msgstr "" #: Cura/gui/configWizard.py:523 msgid "Temperature measurement FAILED!" msgstr "" #: Cura/gui/configWizard.py:528 #, python-format msgid "Head temperature: %d" msgstr "" #: Cura/gui/configWizard.py:535 Cura/gui/configWizard.py:544 #, python-format msgid "Communication State: %s" msgstr "" #: Cura/gui/configWizard.py:538 msgid "Failed to establish connection with the printer." msgstr "" #: Cura/gui/configWizard.py:583 msgid "Please press the right X endstop." msgstr "" #: Cura/gui/configWizard.py:588 msgid "Please press the left X endstop." msgstr "" #: Cura/gui/configWizard.py:593 msgid "Please press the front Y endstop." msgstr "" #: Cura/gui/configWizard.py:598 msgid "Please press the back Y endstop." msgstr "" #: Cura/gui/configWizard.py:603 msgid "Please press the top Z endstop." msgstr "" #: Cura/gui/configWizard.py:608 msgid "Please press the bottom Z endstop." msgstr "" #: Cura/gui/configWizard.py:614 msgid "Checkup finished" msgstr "" #: Cura/gui/configWizard.py:657 msgid "Calibrating the Steps Per E requires some manual actions." msgstr "" #: Cura/gui/configWizard.py:658 msgid "First remove any filament from your machine." msgstr "" #: Cura/gui/configWizard.py:659 msgid "" "Next put in your filament so the tip is aligned with the\n" "top of the extruder drive." msgstr "" #: Cura/gui/configWizard.py:660 msgid "We'll push the filament 100mm" msgstr "" #: Cura/gui/configWizard.py:661 msgid "Extrude 100mm filament" msgstr "" #: Cura/gui/configWizard.py:662 msgid "" "Now measure the amount of extruded filament:\n" "(this can be more or less then 100mm)" msgstr "" #: Cura/gui/configWizard.py:663 msgid "Save" msgstr "" #: Cura/gui/configWizard.py:664 msgid "This results in the following steps per E:" msgstr "" #: Cura/gui/configWizard.py:666 msgid "You can repeat these steps to get better calibration." msgstr "" #: Cura/gui/configWizard.py:669 msgid "" "If you still have filament in your printer which needs\n" "heat to remove, press the heat up button below:" msgstr "" #: Cura/gui/configWizard.py:670 msgid "Heatup for filament removal" msgstr "" #: Cura/gui/configWizard.py:693 Cura/gui/configWizard.py:725 msgid "" "Error: Failed to open serial port to machine\n" "If this keeps happening, try disconnecting and reconnecting the USB cable" msgstr "" #: Cura/gui/firmwareInstall.py:39 msgid "" "I am sorry, but Cura does not ship with a default firmware for your machine " "configuration." msgstr "" #: Cura/gui/firmwareInstall.py:39 Cura/gui/firmwareInstall.py:98 #: Cura/gui/mainWindow.py:459 msgid "Firmware update" msgstr "" #: Cura/gui/firmwareInstall.py:49 msgid "OK" msgstr "" #: Cura/gui/firmwareInstall.py:68 msgid "Reading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:70 msgid "Connecting to machine..." msgstr "" #: Cura/gui/firmwareInstall.py:87 msgid "Uploading firmware..." msgstr "" #: Cura/gui/firmwareInstall.py:90 #, python-format msgid "" "Done!\n" "Installed firmware: %s" msgstr "" #: Cura/gui/firmwareInstall.py:92 msgid "Failed to write firmware.\n" msgstr "" #: Cura/gui/firmwareInstall.py:97 msgid "" "Failed to find machine for firmware upgrade\n" "Is your machine connected to the PC?" msgstr "" #: Cura/gui/mainWindow.py:56 msgid "Load model file...\tCTRL+L" msgstr "" #: Cura/gui/mainWindow.py:58 msgid "Save model...\tCTRL+S" msgstr "" #: Cura/gui/mainWindow.py:60 msgid "Clear platform" msgstr "" #: Cura/gui/mainWindow.py:64 msgid "Print...\tCTRL+P" msgstr "" #: Cura/gui/mainWindow.py:66 Cura/gui/sceneView.py:244 msgid "Save GCode..." msgstr "" #: Cura/gui/mainWindow.py:68 msgid "Show slice engine log..." msgstr "" #: Cura/gui/mainWindow.py:72 msgid "Open Profile..." msgstr "" #: Cura/gui/mainWindow.py:75 msgid "Save Profile..." msgstr "" #: Cura/gui/mainWindow.py:78 msgid "Load Profile from GCode..." msgstr "" #: Cura/gui/mainWindow.py:82 msgid "Reset Profile to default" msgstr "" #: Cura/gui/mainWindow.py:87 msgid "Preferences...\tCTRL+," msgstr "" #: Cura/gui/mainWindow.py:89 msgid "Machine settings..." msgstr "" #: Cura/gui/mainWindow.py:95 msgid "Recent Model Files" msgstr "" #: Cura/gui/mainWindow.py:102 msgid "Recent Profile Files" msgstr "" #: Cura/gui/mainWindow.py:108 msgid "Quit" msgstr "" #: Cura/gui/mainWindow.py:110 msgid "File" msgstr "" #: Cura/gui/mainWindow.py:114 msgid "Switch to quickprint..." msgstr "" #: Cura/gui/mainWindow.py:118 msgid "Switch to full settings..." msgstr "" #: Cura/gui/mainWindow.py:128 msgid "Minecraft map import..." msgstr "" #: Cura/gui/mainWindow.py:132 msgid "PID Debugger..." msgstr "" #: Cura/gui/mainWindow.py:135 msgid "Copy profile to clipboard" msgstr "" #: Cura/gui/mainWindow.py:137 msgid "Tools" msgstr "" #: Cura/gui/mainWindow.py:143 Cura/util/profile.py:158 msgid "Machine" msgstr "" #: Cura/gui/mainWindow.py:146 msgid "Open expert settings..." msgstr "" #: Cura/gui/mainWindow.py:150 msgid "Run first run wizard..." msgstr "" #: Cura/gui/mainWindow.py:152 msgid "Run bed leveling wizard..." msgstr "" #: Cura/gui/mainWindow.py:155 msgid "Run head offset wizard..." msgstr "" #: Cura/gui/mainWindow.py:158 msgid "Expert" msgstr "" #: Cura/gui/mainWindow.py:161 msgid "Online documentation..." msgstr "" #: Cura/gui/mainWindow.py:163 msgid "Report a problem..." msgstr "" #: Cura/gui/mainWindow.py:165 msgid "Check for update..." msgstr "" #: Cura/gui/mainWindow.py:167 msgid "Open YouMagine website..." msgstr "" #: Cura/gui/mainWindow.py:169 msgid "About Cura..." msgstr "" #: Cura/gui/mainWindow.py:171 msgid "Help" msgstr "" #: Cura/gui/mainWindow.py:391 msgid "Add new machine..." msgstr "" #: Cura/gui/mainWindow.py:396 msgid "Install custom firmware" msgstr "" #: Cura/gui/mainWindow.py:398 msgid "Install default Marlin firmware" msgstr "" #: Cura/gui/mainWindow.py:402 msgid "Select profile file to load" msgstr "" #: Cura/gui/mainWindow.py:414 msgid "Select gcode file to load profile from" msgstr "" #: Cura/gui/mainWindow.py:427 msgid "" "No profile found in GCode file.\n" "This feature only works with GCode files made by Cura 12.07 or newer." msgstr "" #: Cura/gui/mainWindow.py:427 msgid "Profile load error" msgstr "" #: Cura/gui/mainWindow.py:431 msgid "Select profile file to save" msgstr "" #: Cura/gui/mainWindow.py:439 msgid "" "This will reset all profile settings to defaults.\n" "Unless you have saved your current profile, all settings will be lost!\n" "Do you really want to reset?" msgstr "" #: Cura/gui/mainWindow.py:439 msgid "Profile reset" msgstr "" #: Cura/gui/mainWindow.py:459 msgid "" "Warning: Installing a custom firmware does not guarantee that you machine " "will function correctly, and could damage your machine." msgstr "" #: Cura/gui/mainWindow.py:460 msgid "Open firmware to upload" msgstr "" #: Cura/gui/mainWindow.py:527 msgid "You are running the latest version of Cura!" msgstr "" #: Cura/gui/mainWindow.py:527 msgid "Awesome!" msgstr "" #: Cura/gui/mainWindow.py:583 msgid "Plugins" msgstr "" #: Cura/gui/pluginPanel.py:26 msgid "Plugins:" msgstr "" #: Cura/gui/pluginPanel.py:30 msgid "Open plugin location" msgstr "" #: Cura/gui/pluginPanel.py:31 msgid "Enabled plugins" msgstr "" #: Cura/gui/pluginPanel.py:133 msgid "You need to select a plugin before you can add anything." msgstr "" #: Cura/gui/pluginPanel.py:133 msgid "Error: no plugin selected" msgstr "" #: Cura/gui/preferencesDialog.py:24 msgid "Colours" msgstr "" #: Cura/gui/preferencesDialog.py:29 msgid "Filament settings" msgstr "" #: Cura/gui/preferencesDialog.py:39 msgid "Cura settings" msgstr "" #: Cura/gui/preferencesDialog.py:73 msgid "Machine settings" msgstr "" #: Cura/gui/preferencesDialog.py:82 msgid "Printer head size" msgstr "" #: Cura/gui/preferencesDialog.py:90 #, python-format msgid "Extruder %d" msgstr "" #: Cura/gui/preferencesDialog.py:94 msgid "Communication settings" msgstr "" #: Cura/gui/preferencesDialog.py:137 msgid "Cannot remove the last machine configuration in Cura" msgstr "" #: Cura/gui/preferencesDialog.py:137 msgid "Machine remove error" msgstr "" #: Cura/gui/printWindow.py:129 msgid "Printing" msgstr "" #: Cura/gui/printWindow.py:158 msgid "Statistics" msgstr "" #: Cura/gui/printWindow.py:163 msgid "" "Your computer is running on battery power.\n" "Connect your computer to AC power or your print might not finish." msgstr "" #: Cura/gui/printWindow.py:174 msgid "" "Filament: ####.##m #.##g\n" "Estimated print time: #####:##\n" "Machine state:\n" "Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" msgstr "" #: Cura/gui/printWindow.py:179 msgid "Connect" msgstr "" #: Cura/gui/printWindow.py:181 Cura/gui/sceneView.py:65 #: Cura/gui/sceneView.py:804 msgid "Print" msgstr "" #: Cura/gui/printWindow.py:182 Cura/gui/printWindow.py:419 msgid "Pause" msgstr "" #: Cura/gui/printWindow.py:183 msgid "Cancel print" msgstr "" #: Cura/gui/printWindow.py:184 msgid "Error log" msgstr "" #: Cura/gui/printWindow.py:205 msgid "BedTemp:" msgstr "" #: Cura/gui/printWindow.py:213 msgid "Temp:" msgstr "" #: Cura/gui/printWindow.py:261 msgid "Jog" msgstr "" #: Cura/gui/printWindow.py:276 msgid "Outer wall:" msgstr "" #: Cura/gui/printWindow.py:279 msgid "Inner wall:" msgstr "" #: Cura/gui/printWindow.py:282 msgid "Fill:" msgstr "" #: Cura/gui/printWindow.py:285 msgid "Support:" msgstr "" #: Cura/gui/printWindow.py:289 Cura/util/profile.py:183 #: Cura/util/profile.py:184 Cura/util/profile.py:185 msgid "Speed" msgstr "" #: Cura/gui/printWindow.py:307 msgid "Term" msgstr "" #: Cura/gui/printWindow.py:314 msgid "Enable timelapse movie recording" msgstr "" #: Cura/gui/printWindow.py:328 msgid "Show preview" msgstr "" #: Cura/gui/printWindow.py:334 msgid "Camera" msgstr "" #: Cura/gui/printWindow.py:417 msgid "Resume" msgstr "" #: Cura/gui/printWindow.py:434 msgid "Loading gcode...\n" msgstr "" #: Cura/gui/printWindow.py:436 #, python-format msgid "Filament: %(amount).2fm %(weight).2fg\n" msgstr "" #: Cura/gui/printWindow.py:439 #, python-format msgid "Filament cost: %s\n" msgstr "" #: Cura/gui/sceneView.py:64 msgid "Load" msgstr "" #: Cura/gui/sceneView.py:69 msgid "Rotate" msgstr "" #: Cura/gui/sceneView.py:70 msgid "Scale" msgstr "" #: Cura/gui/sceneView.py:71 msgid "Mirror" msgstr "" #: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76 msgid "Reset" msgstr "" #: Cura/gui/sceneView.py:74 msgid "Lay flat" msgstr "" #: Cura/gui/sceneView.py:77 msgid "To max" msgstr "" #: Cura/gui/sceneView.py:79 msgid "Mirror X" msgstr "" #: Cura/gui/sceneView.py:80 msgid "Mirror Y" msgstr "" #: Cura/gui/sceneView.py:81 msgid "Mirror Z" msgstr "" #: Cura/gui/sceneView.py:89 msgid "Scale X" msgstr "" #: Cura/gui/sceneView.py:91 msgid "Scale Y" msgstr "" #: Cura/gui/sceneView.py:93 msgid "Scale Z" msgstr "" #: Cura/gui/sceneView.py:95 msgid "Size X (mm)" msgstr "" #: Cura/gui/sceneView.py:97 msgid "Size Y (mm)" msgstr "" #: Cura/gui/sceneView.py:99 msgid "Size Z (mm)" msgstr "" #: Cura/gui/sceneView.py:101 msgid "Uniform scale" msgstr "" #: Cura/gui/sceneView.py:104 msgid "View mode" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Normal" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Overhang" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Transparent" msgstr "" #: Cura/gui/sceneView.py:104 msgid "X-Ray" msgstr "" #: Cura/gui/sceneView.py:104 msgid "Layers" msgstr "" #: Cura/gui/sceneView.py:107 msgid "Share on YouMagine" msgstr "" #: Cura/gui/sceneView.py:198 msgid "Open 3D model" msgstr "" #: Cura/gui/sceneView.py:213 msgid "Save 3D model" msgstr "" #: Cura/gui/sceneView.py:243 msgid "Print with USB" msgstr "" #: Cura/gui/sceneView.py:245 msgid "Slice engine log..." msgstr "" #: Cura/gui/sceneView.py:257 Cura/gui/sceneView.py:810 msgid "Save toolpath" msgstr "" #: Cura/gui/sceneView.py:296 msgid "The slicing engine reported the following" msgstr "" #: Cura/gui/sceneView.py:296 msgid "Engine log..." msgstr "" #: Cura/gui/sceneView.py:675 msgid "Delete object" msgstr "" #: Cura/gui/sceneView.py:676 msgid "Center on platform" msgstr "" #: Cura/gui/sceneView.py:677 msgid "Multiply object" msgstr "" #: Cura/gui/sceneView.py:678 msgid "Split object into parts" msgstr "" #: Cura/gui/sceneView.py:680 msgid "Dual extrusion merge" msgstr "" #: Cura/gui/sceneView.py:682 msgid "Delete all objects" msgstr "" #: Cura/gui/sceneView.py:807 msgid "Toolpath to SD" msgstr "" #: Cura/gui/sceneView.py:1117 msgid "Loading toolpath for visualization..." msgstr "" #: Cura/gui/sceneView.py:1168 msgid "Overhang view not working due to lack of OpenGL shaders support." msgstr "" #: Cura/gui/simpleMode.py:20 msgid "High quality print" msgstr "" #: Cura/gui/simpleMode.py:21 msgid "Normal quality print" msgstr "" #: Cura/gui/simpleMode.py:22 msgid "Fast low quality print" msgstr "" #: Cura/gui/simpleMode.py:23 msgid "Thin walled cup or vase" msgstr "" #: Cura/gui/simpleMode.py:33 msgid "Print support structure" msgstr "" #: Cura/gui/simpleMode.py:38 msgid "Select a print type:" msgstr "" #: Cura/gui/simpleMode.py:48 msgid "Material:" msgstr "" #: Cura/gui/simpleMode.py:52 msgid "Diameter:" msgstr "" #: Cura/gui/simpleMode.py:58 msgid "Other:" msgstr "" #: Cura/gui/simpleMode.py:119 msgid "Exterior Only" msgstr "" #: Cura/gui/tools/batchRun.py:14 msgid "Cura - Batch run" msgstr "" #: Cura/gui/tools/batchRun.py:29 msgid "Add" msgstr "" #: Cura/gui/tools/batchRun.py:30 msgid "Remove" msgstr "" #: Cura/gui/tools/batchRun.py:31 msgid "Prepare all" msgstr "" #: Cura/gui/tools/batchRun.py:47 msgid "Open file to batch prepare" msgstr "" #: Cura/gui/tools/batchRun.py:134 #, python-format msgid "Building: %d " msgstr "" #: Cura/gui/tools/batchRun.py:137 #, python-format msgid "Done: 0/%d " msgstr "" #: Cura/gui/tools/batchRun.py:140 msgid "Abort" msgstr "" #: Cura/gui/tools/batchRun.py:163 Cura/gui/tools/batchRun.py:233 msgid "Close" msgstr "" #: Cura/gui/tools/batchRun.py:187 #, python-format msgid "Build: %d models" msgstr "" #: Cura/gui/tools/batchRun.py:188 #, python-format msgid "" "\n" "Slicing took: %(hours)02d:%(minutes)02d" msgstr "" #: Cura/gui/tools/batchRun.py:198 #, python-format msgid "Building: [%(index)d/%(size)d]" msgstr "" #: Cura/gui/tools/batchRun.py:214 msgid "Aborted by user." msgstr "" #: Cura/gui/tools/batchRun.py:228 #, python-format msgid "Done %(index)d/%(size)d" msgstr "" #: Cura/gui/tools/batchRun.py:236 msgid "To SDCard" msgstr "" #: Cura/gui/tools/youmagineGui.py:79 msgid "Checking token" msgstr "" #: Cura/gui/tools/youmagineGui.py:83 msgid "Failed to contact YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:83 Cura/gui/tools/youmagineGui.py:116 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153 msgid "YouMagine error." msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "Cura is now authorized to share on YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:100 msgid "YouMagine." msgstr "" #: Cura/gui/tools/youmagineGui.py:112 msgid "Creating new design on YouMagine..." msgstr "" #: Cura/gui/tools/youmagineGui.py:116 msgid "Failed to create a design, nothing uploaded!" msgstr "" #: Cura/gui/tools/youmagineGui.py:120 #, python-format msgid "Building model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:131 #, python-format msgid "Uploading model %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140 #: Cura/gui/tools/youmagineGui.py:148 #, python-format msgid "Failed to upload %s!" msgstr "" #: Cura/gui/tools/youmagineGui.py:137 #, python-format msgid "Uploading file %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:145 #, python-format msgid "Uploading image %s..." msgstr "" #: Cura/gui/tools/youmagineGui.py:153 msgid "Failed to upload snapshot!" msgstr "" #: Cura/gui/tools/youmagineGui.py:158 msgid "Publishing design..." msgstr "" #: Cura/gui/tools/youmagineGui.py:230 msgid "Request authorization from YouMagine" msgstr "" #: Cura/gui/tools/youmagineGui.py:231 msgid "Paste token here" msgstr "" #: Cura/gui/tools/youmagineGui.py:237 msgid "" "To share your designs on YouMagine\n" "you need an account on YouMagine.com\n" "and authorize Cura to access your account." msgstr "" #: Cura/gui/tools/youmagineGui.py:239 msgid "" "This will open a browser window where you can\n" "authorize Cura to access your YouMagine account.\n" "You can revoke access at any time\n" "from YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:274 msgid "Design name" msgstr "" #: Cura/gui/tools/youmagineGui.py:278 msgid "Publish after upload" msgstr "" #: Cura/gui/tools/youmagineGui.py:279 msgid "Share!" msgstr "" #: Cura/gui/tools/youmagineGui.py:287 msgid "Add..." msgstr "" #: Cura/gui/tools/youmagineGui.py:289 msgid "Webcam..." msgstr "" #: Cura/gui/tools/youmagineGui.py:297 msgid "" "Directly publish the design after uploading.\n" "Without this check the design will not be public\n" "until you publish it yourself on YouMagine.com" msgstr "" #: Cura/gui/tools/youmagineGui.py:303 msgid "Design name:" msgstr "" #: Cura/gui/tools/youmagineGui.py:305 msgid "Description:" msgstr "" #: Cura/gui/tools/youmagineGui.py:307 msgid "Category:" msgstr "" #: Cura/gui/tools/youmagineGui.py:309 msgid "License:" msgstr "" #: Cura/gui/tools/youmagineGui.py:312 msgid "Images:" msgstr "" #: Cura/gui/tools/youmagineGui.py:315 msgid "Related design files:" msgstr "" #: Cura/gui/tools/youmagineGui.py:338 msgid "The name cannot be empty" msgstr "" #: Cura/gui/tools/youmagineGui.py:338 Cura/gui/tools/youmagineGui.py:342 msgid "New design error." msgstr "" #: Cura/gui/tools/youmagineGui.py:342 msgid "The description cannot be empty" msgstr "" #: Cura/gui/util/openglGui.py:239 msgid "An error has occurred during the 3D view drawing." msgstr "" #: Cura/gui/util/openglGui.py:246 msgid "3D window error" msgstr "" #: Cura/util/profile.py:153 Cura/util/profile.py:154 Cura/util/profile.py:155 #: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:182 msgid "Quality" msgstr "" #: Cura/util/profile.py:153 msgid "Layer height (mm)" msgstr "" #: Cura/util/profile.py:153 msgid "" "Layer height in millimeters.\n" "This is the most important setting to determine the quality of your print. " "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to " "0.25mm with an Ultimaker for very fast prints at low quality." msgstr "" #: Cura/util/profile.py:154 msgid "Shell thickness (mm)" msgstr "" #: Cura/util/profile.py:154 msgid "" "Thickness of the outside shell in the horizontal direction.\n" "This is used in combination with the nozzle size to define the number\n" "of perimeter lines and the thickness of those perimeter lines." msgstr "" #: Cura/util/profile.py:155 msgid "Enable retraction" msgstr "" #: Cura/util/profile.py:155 msgid "" "Retract the filament when the nozzle is moving over a none-printed area. " "Details about the retraction can be configured in the advanced tab." msgstr "" #: Cura/util/profile.py:156 Cura/util/profile.py:157 msgid "Fill" msgstr "" #: Cura/util/profile.py:156 msgid "Bottom/Top thickness (mm)" msgstr "" #: Cura/util/profile.py:156 msgid "" "This controls the thickness of the bottom and top layers, the amount of " "solid layers put down is calculated by the layer thickness and this value.\n" "Having this value a multiple of the layer thickness makes sense. And keep it " "near your wall thickness to make an evenly strong part." msgstr "" #: Cura/util/profile.py:157 msgid "Fill Density (%)" msgstr "" #: Cura/util/profile.py:157 msgid "" "This controls how densely filled the insides of your print will be. For a " "solid part use 100%, for an empty part use 0%. A value around 20% is usually " "enough.\n" "This won't effect the outside of the print and only adjusts how strong the " "part becomes." msgstr "" #: Cura/util/profile.py:158 msgid "" "The nozzle size is very important, this is used to calculate the line width " "of the infill, and used to calculate the amount of outside wall lines and " "thickness for the wall thickness you entered in the print settings." msgstr "" #: Cura/util/profile.py:159 Cura/util/profile.py:160 Cura/util/profile.py:161 #: Cura/util/profile.py:162 Cura/util/profile.py:163 Cura/util/profile.py:164 msgid "Speed and Temperature" msgstr "" #: Cura/util/profile.py:159 msgid "Print speed (mm/s)" msgstr "" #: Cura/util/profile.py:159 msgid "" "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/" "s, but for good quality prints you want to print slower. Printing speed " "depends on a lot of factors. So you will be experimenting with optimal " "settings for this." msgstr "" #: Cura/util/profile.py:160 msgid "Printing temperature (C)" msgstr "" #: Cura/util/profile.py:160 Cura/util/profile.py:161 Cura/util/profile.py:162 #: Cura/util/profile.py:163 msgid "" "Temperature used for printing. Set at 0 to pre-heat yourself.\n" "For PLA a value of 210C is usually used.\n" "For ABS a value of 230C or higher is required." msgstr "" #: Cura/util/profile.py:161 msgid "2nd nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:162 msgid "3th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:163 msgid "4th nozzle temperature (C)" msgstr "" #: Cura/util/profile.py:164 msgid "Bed temperature (C)" msgstr "" #: Cura/util/profile.py:164 msgid "" "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself." msgstr "" #: Cura/util/profile.py:165 Cura/util/profile.py:166 msgid "None" msgstr "" #: Cura/util/profile.py:165 msgid "Touching buildplate" msgstr "" #: Cura/util/profile.py:165 msgid "Everywhere" msgstr "" #: Cura/util/profile.py:165 Cura/util/profile.py:166 Cura/util/profile.py:167 #: Cura/util/profile.py:206 Cura/util/profile.py:207 Cura/util/profile.py:208 msgid "Support" msgstr "" #: Cura/util/profile.py:165 msgid "Support type" msgstr "" #: Cura/util/profile.py:165 msgid "" "Type of support structure build.\n" "\"Touching buildplate\" is the most commonly used support setting.\n" "\n" "None does not do any support.\n" "Touching buildplate only creates support where the support structure will " "touch the build platform.\n" "Everywhere creates support even on top of parts of the model." msgstr "" #: Cura/util/profile.py:166 Cura/util/profile.py:212 msgid "Brim" msgstr "" #: Cura/util/profile.py:166 Cura/util/profile.py:213 Cura/util/profile.py:214 #: Cura/util/profile.py:215 Cura/util/profile.py:216 Cura/util/profile.py:217 #: Cura/util/profile.py:218 msgid "Raft" msgstr "" #: Cura/util/profile.py:166 msgid "Platform adhesion type" msgstr "" #: Cura/util/profile.py:166 msgid "" "Different options that help in preventing corners from lifting due to " "warping.\n" "Brim adds a single layer thick flat area around your object which is easy to " "cut off afterwards, and the recommended option.\n" "Raft adds a thick raster at below the object and a thin interface between " "this and your object.\n" "(Note that enabling the brim or raft disables the skirt)" msgstr "" #: Cura/util/profile.py:167 msgid "Both" msgstr "" #: Cura/util/profile.py:167 msgid "First extruder" msgstr "" #: Cura/util/profile.py:167 msgid "Second extruder" msgstr "" #: Cura/util/profile.py:167 msgid "Support dual extrusion" msgstr "" #: Cura/util/profile.py:167 msgid "" "Which extruder to use for support material, for break-away support you can " "use both extruders.\n" "But if one of the materials is more expensive then the other you could " "select an extruder to use for support material. This causes more extruder " "switches.\n" "You can also use the 2nd extruder for soluble support materials." msgstr "" #: Cura/util/profile.py:168 Cura/util/profile.py:169 Cura/util/profile.py:170 #: Cura/util/profile.py:171 Cura/util/profile.py:172 msgid "Filament" msgstr "" #: Cura/util/profile.py:168 msgid "Diameter (mm)" msgstr "" #: Cura/util/profile.py:168 msgid "" "Diameter of your filament, as accurately as possible.\n" "If you cannot measure this value you will have to calibrate it, a higher " "number means less extrusion, a smaller number generates more extrusion." msgstr "" #: Cura/util/profile.py:169 msgid "Diameter2 (mm)" msgstr "" #: Cura/util/profile.py:169 msgid "" "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:170 msgid "Diameter3 (mm)" msgstr "" #: Cura/util/profile.py:170 msgid "" "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:171 msgid "Diameter4 (mm)" msgstr "" #: Cura/util/profile.py:171 msgid "" "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter " "as for nozzle 1." msgstr "" #: Cura/util/profile.py:172 msgid "Flow (%)" msgstr "" #: Cura/util/profile.py:172 msgid "" "Flow compensation, the amount of material extruded is multiplied by this " "value" msgstr "" #: Cura/util/profile.py:173 Cura/util/profile.py:174 Cura/util/profile.py:175 #: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178 msgid "Retraction" msgstr "" #: Cura/util/profile.py:173 msgid "Speed (mm/s)" msgstr "" #: Cura/util/profile.py:173 msgid "" "Speed at which the filament is retracted, a higher retraction speed works " "better. But a very high retraction speed can lead to filament grinding." msgstr "" #: Cura/util/profile.py:174 msgid "Distance (mm)" msgstr "" #: Cura/util/profile.py:174 msgid "" "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm " "seems to generate good results." msgstr "" #: Cura/util/profile.py:175 msgid "Dual extrusion switch amount (mm)" msgstr "" #: Cura/util/profile.py:175 msgid "" "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for " "no retraction at all. A value of 16.0mm seems to generate good results." msgstr "" #: Cura/util/profile.py:176 msgid "Minimum travel (mm)" msgstr "" #: Cura/util/profile.py:176 msgid "" "Minimum amount of travel needed for a retraction to happen at all. To make " "sure you do not get a lot of retractions in a small area." msgstr "" #: Cura/util/profile.py:177 msgid "Enable combing" msgstr "" #: Cura/util/profile.py:177 msgid "" "Combing is the act of avoiding holes in the print for the head to travel " "over. If combing is disabled the printer head moves straight from the start " "point to the end point and it will always retract." msgstr "" #: Cura/util/profile.py:178 msgid "Minimal extrusion before retracting (mm)" msgstr "" #: Cura/util/profile.py:178 msgid "" "The minimal amount of extrusion that needs to be done before retracting " "again if a retraction needs to happen before this minimal is reached the " "retraction is ignored.\n" "This avoids retraction a lot on the same piece of filament which flattens " "the filament and causes grinding issues." msgstr "" #: Cura/util/profile.py:179 msgid "Initial layer thickness (mm)" msgstr "" #: Cura/util/profile.py:179 msgid "" "Layer thickness of the bottom layer. A thicker bottom layer makes sticking " "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as " "the other layers." msgstr "" #: Cura/util/profile.py:180 msgid "Cut off object bottom (mm)" msgstr "" #: Cura/util/profile.py:180 msgid "" "Sinks the object into the platform, this can be used for objects that do not " "have a flat bottom and thus create a too small first layer." msgstr "" #: Cura/util/profile.py:182 msgid "Dual extrusion overlap (mm)" msgstr "" #: Cura/util/profile.py:182 msgid "" "Add a certain amount of overlapping extrusion on dual-extrusion prints. This " "bonds the different colors better together." msgstr "" #: Cura/util/profile.py:183 msgid "Travel speed (mm/s)" msgstr "" #: Cura/util/profile.py:183 msgid "" "Speed at which travel moves are done, a high quality build Ultimaker can " "reach speeds of 250mm/s. But some machines might miss steps then." msgstr "" #: Cura/util/profile.py:184 msgid "Bottom layer speed (mm/s)" msgstr "" #: Cura/util/profile.py:184 msgid "" "Print speed for the bottom layer, you want to print the first layer slower " "so it sticks better to the printer bed." msgstr "" #: Cura/util/profile.py:185 msgid "Infill speed (mm/s)" msgstr "" #: Cura/util/profile.py:185 msgid "" "Speed at which infill parts are printed. If set to 0 then the print speed is " "used for the infill. Printing the infill faster can greatly reduce printing, " "but this can negatively effect print quality.." msgstr "" #: Cura/util/profile.py:186 Cura/util/profile.py:187 Cura/util/profile.py:194 #: Cura/util/profile.py:195 Cura/util/profile.py:196 Cura/util/profile.py:197 #: Cura/util/profile.py:198 msgid "Cool" msgstr "" #: Cura/util/profile.py:186 msgid "Minimal layer time (sec)" msgstr "" #: Cura/util/profile.py:186 msgid "" "Minimum time spend in a layer, gives the layer time to cool down before the " "next layer is put on top. If the layer will be placed down too fast the " "printer will slow down to make sure it has spend at least this amount of " "seconds printing this layer." msgstr "" #: Cura/util/profile.py:187 msgid "Enable cooling fan" msgstr "" #: Cura/util/profile.py:187 msgid "" "Enable the cooling fan during the print. The extra cooling from the cooling " "fan is essential during faster prints." msgstr "" #: Cura/util/profile.py:189 msgid "Line count" msgstr "" #: Cura/util/profile.py:189 msgid "" "The skirt is a line drawn around the object at the first layer. This helps " "to prime your extruder, and to see if the object fits on your platform.\n" "Setting this to 0 will disable the skirt. Multiple skirt lines can help " "priming your extruder better for small objects." msgstr "" #: Cura/util/profile.py:190 msgid "Start distance (mm)" msgstr "" #: Cura/util/profile.py:190 msgid "" "The distance between the skirt and the first layer.\n" "This is the minimal distance, multiple skirt lines will be put outwards from " "this distance." msgstr "" #: Cura/util/profile.py:191 msgid "Minimal length (mm)" msgstr "" #: Cura/util/profile.py:191 msgid "" "The minimal length of the skirt, if this minimal length is not reached it " "will add more skirt lines to reach this minimal lenght.\n" "Note: If the line count is set to 0 this is ignored." msgstr "" #: Cura/util/profile.py:194 msgid "Fan on layer number" msgstr "" #: Cura/util/profile.py:194 msgid "" "The layer at which the fan is turned on. The first layer is layer 0. The " "first layer can stick better if you turn on the fan on, on the 2nd layer." msgstr "" #: Cura/util/profile.py:195 msgid "Fan speed min (%)" msgstr "" #: Cura/util/profile.py:195 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Minimal fan speed is used if the layer is not slowed down due to cooling." msgstr "" #: Cura/util/profile.py:196 msgid "Fan speed max (%)" msgstr "" #: Cura/util/profile.py:196 msgid "" "When the fan is turned on, it is enabled at this speed setting. If cool " "slows down the layer, the fan is adjusted between the min and max speed. " "Maximal fan speed is used if the layer is slowed down due to cooling by more " "than 200%." msgstr "" #: Cura/util/profile.py:197 msgid "Minimum speed (mm/s)" msgstr "" #: Cura/util/profile.py:197 msgid "" "The minimal layer time can cause the print to slow down so much it starts to " "ooze. The minimal feedrate protects against this. Even if a print gets slown " "down it will never be slower than this minimal speed." msgstr "" #: Cura/util/profile.py:198 msgid "Cool head lift" msgstr "" #: Cura/util/profile.py:198 msgid "" "Lift the head if the minimal speed is hit because of cool slowdown, and wait " "the extra time so the minimal layer time is always hit." msgstr "" #: Cura/util/profile.py:203 Cura/util/profile.py:204 Cura/util/profile.py:205 msgid "Infill" msgstr "" #: Cura/util/profile.py:203 msgid "Solid infill top" msgstr "" #: Cura/util/profile.py:203 msgid "" "Create a solid top surface, if set to false the top is filled with the fill " "percentage. Useful for cups/vases." msgstr "" #: Cura/util/profile.py:204 msgid "Solid infill bottom" msgstr "" #: Cura/util/profile.py:204 msgid "" "Create a solid bottom surface, if set to false the bottom is filled with the " "fill percentage. Useful for buildings." msgstr "" #: Cura/util/profile.py:205 msgid "Infill overlap (%)" msgstr "" #: Cura/util/profile.py:205 msgid "" "Amount of overlap between the infill and the walls. There is a slight " "overlap with the walls and the infill so the walls connect firmly to the " "infill." msgstr "" #: Cura/util/profile.py:206 msgid "Fill amount (%)" msgstr "" #: Cura/util/profile.py:206 #, python-format msgid "" "Amount of infill structure in the support material, less material gives " "weaker support which is easier to remove. 20% seems to be a good average." msgstr "" #: Cura/util/profile.py:207 msgid "Distance X/Y (mm)" msgstr "" #: Cura/util/profile.py:207 msgid "" "Distance of the support material from the print, in the X/Y directions.\n" "0.7mm gives a nice distance from the print so the support does not stick to " "the print." msgstr "" #: Cura/util/profile.py:208 msgid "Distance Z (mm)" msgstr "" #: Cura/util/profile.py:208 msgid "" "Distance from the top/bottom of the support to the print. A small gap here " "makes it easier to remove the support but makes the print a bit uglier.\n" "0.15mm gives a good seperation of the support material." msgstr "" #: Cura/util/profile.py:212 msgid "Brim line amount" msgstr "" #: Cura/util/profile.py:212 msgid "" "The amount of lines used for a brim, more lines means a larger brim which " "sticks better, but this also makes your effective print area smaller." msgstr "" #: Cura/util/profile.py:213 msgid "Extra margin (mm)" msgstr "" #: Cura/util/profile.py:213 msgid "" "If the raft is enabled, this is the extra raft area around the object which " "is also rafted. Increasing this margin will create a stronger raft while " "using more material and leaving less are for your print." msgstr "" #: Cura/util/profile.py:214 msgid "Line spacing (mm)" msgstr "" #: Cura/util/profile.py:214 msgid "" "When you are using the raft this is the distance between the centerlines of " "the raft line." msgstr "" #: Cura/util/profile.py:215 msgid "Base thickness (mm)" msgstr "" #: Cura/util/profile.py:215 msgid "" "When you are using the raft this is the thickness of the base layer which is " "put down." msgstr "" #: Cura/util/profile.py:216 msgid "Base line width (mm)" msgstr "" #: Cura/util/profile.py:216 msgid "" "When you are using the raft this is the width of the base layer lines which " "are put down." msgstr "" #: Cura/util/profile.py:217 msgid "Interface thickness (mm)" msgstr "" #: Cura/util/profile.py:217 msgid "" "When you are using the raft this is the thickness of the interface layer " "which is put down." msgstr "" #: Cura/util/profile.py:218 msgid "Interface line width (mm)" msgstr "" #: Cura/util/profile.py:218 msgid "" "When you are using the raft this is the width of the interface layer lines " "which are put down." msgstr "" #: Cura/util/profile.py:220 Cura/util/profile.py:221 Cura/util/profile.py:222 #: Cura/util/profile.py:223 msgid "Fix horrible" msgstr "" #: Cura/util/profile.py:220 msgid "Combine everything (Type-A)" msgstr "" #: Cura/util/profile.py:220 Cura/util/profile.py:221 msgid "" "This expert option adds all parts of the model together. The result is " "usually that internal cavities disappear. Depending on the model this can be " "intended or not. Enabling this option is at your own risk. Type-A is " "depended on the model normals and tries to keep some internal holes intact. " "Type-B ignores all internal holes and only keeps the outside shape per layer." msgstr "" #: Cura/util/profile.py:221 msgid "Combine everything (Type-B)" msgstr "" #: Cura/util/profile.py:222 msgid "Keep open faces" msgstr "" #: Cura/util/profile.py:222 msgid "" "This expert option keeps all the open bits of the model intact. Normally " "Cura tries to stitch up small holes and remove everything with big holes, " "but this option keeps bits that are not properly part of anything and just " "goes with whatever it is left. This option is usually not what you want, but " "it might enable you to slice models otherwise failing to produce proper " "paths.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:223 msgid "Extensive stitching" msgstr "" #: Cura/util/profile.py:223 msgid "" "Extrensive stitching tries to fix up open holes in the model by closing the " "hole with touching polygons. This algorthm is quite expensive and could " "introduce a lot of processing time.\n" "As with all \"Fix horrible\" options, results may vary and use at your own " "risk." msgstr "" #: Cura/util/profile.py:338 msgid "Save profile on slice" msgstr "" #: Cura/util/profile.py:338 msgid "" "When slicing save the profile as [stl_file]_profile.ini next to the model." msgstr "" #: Cura/util/profile.py:339 msgid "Cost (price/kg)" msgstr "" #: Cura/util/profile.py:339 msgid "Cost of your filament per kg, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:340 msgid "Cost (price/m)" msgstr "" #: Cura/util/profile.py:340 msgid "" "Cost of your filament per meter, to estimate the cost of the final print." msgstr "" #: Cura/util/profile.py:341 msgid "Auto detect SD card drive" msgstr "" #: Cura/util/profile.py:341 msgid "" "Auto detect the SD card. You can disable this because on some systems " "external hard-drives or USB sticks are detected as SD card." msgstr "" #: Cura/util/profile.py:342 msgid "Check for updates" msgstr "" #: Cura/util/profile.py:342 msgid "Check for newer versions of Cura on startup" msgstr "" #: Cura/util/profile.py:343 msgid "Send usage statistics" msgstr "" #: Cura/util/profile.py:343 msgid "Submit anonymous usage information to improve next versions of Cura" msgstr "" #: Cura/util/profile.py:345 msgid "Density (kg/m3)" msgstr "" #: Cura/util/profile.py:345 msgid "" "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. " "This value is used to estimate the weight if the filament used for the print." msgstr "" #: Cura/util/profile.py:348 msgid "Model colour" msgstr "" #: Cura/util/profile.py:349 msgid "Model colour (2)" msgstr "" #: Cura/util/profile.py:350 msgid "Model colour (3)" msgstr "" #: Cura/util/profile.py:351 msgid "Model colour (4)" msgstr "" #: Cura/util/profile.py:362 msgid "Maximum width (mm)" msgstr "" #: Cura/util/profile.py:362 Cura/util/profile.py:363 Cura/util/profile.py:364 msgid "Size of the machine in mm" msgstr "" #: Cura/util/profile.py:363 msgid "Maximum depth (mm)" msgstr "" #: Cura/util/profile.py:364 msgid "Maximum height (mm)" msgstr "" #: Cura/util/profile.py:367 msgid "" "If you have an heated bed, this enabled heated bed settings (requires " "restart)" msgstr "" #: Cura/util/profile.py:368 msgid "GCode Flavor" msgstr "" #: Cura/util/profile.py:368 msgid "" "Flavor of generated GCode.\n" "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n" "UltiGCode is a variation of the RepRap GCode which puts more settings in the " "machine instead of the slicer." msgstr "" #: Cura/util/profile.py:369 msgid "Extruder count" msgstr "" #: Cura/util/profile.py:369 msgid "Amount of extruders in your machine." msgstr "" #: Cura/util/profile.py:370 Cura/util/profile.py:372 Cura/util/profile.py:374 msgid "Offset X" msgstr "" #: Cura/util/profile.py:370 Cura/util/profile.py:371 msgid "The offset of your secondary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:371 Cura/util/profile.py:373 Cura/util/profile.py:375 msgid "Offset Y" msgstr "" #: Cura/util/profile.py:372 Cura/util/profile.py:373 msgid "The offset of your tertiary extruder compared to the primary." msgstr "" #: Cura/util/profile.py:374 Cura/util/profile.py:375 msgid "The offset of your forth extruder compared to the primary." msgstr "" #: Cura/util/profile.py:376 msgid "E-Steps per 1mm filament" msgstr "" #: Cura/util/profile.py:376 msgid "" "Amount of steps per mm filament extrusion. If set to 0 then this value is " "ignored and the value in your firmware is used." msgstr "" #: Cura/util/profile.py:377 msgid "Serial port" msgstr "" #: Cura/util/profile.py:377 msgid "Serial port to use for communication with the printer" msgstr "" #: Cura/util/profile.py:379 msgid "Baudrate" msgstr "" #: Cura/util/profile.py:379 msgid "" "Speed of the serial port communication\n" "Needs to match your firmware settings\n" "Common values are 250000, 115200, 57600" msgstr "" #: Cura/util/profile.py:382 msgid "Head size towards X min (mm)" msgstr "" #: Cura/util/profile.py:382 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:383 msgid "Head size towards Y min (mm)" msgstr "" #: Cura/util/profile.py:383 Cura/util/profile.py:384 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:384 msgid "Head size towards X max (mm)" msgstr "" #: Cura/util/profile.py:385 msgid "Head size towards Y max (mm)" msgstr "" #: Cura/util/profile.py:385 msgid "" "The head size when printing multiple objects, measured from the tip of the " "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan " "is on the left side." msgstr "" #: Cura/util/profile.py:386 msgid "Printer gantry height (mm)" msgstr "" #: Cura/util/profile.py:386 msgid "" "The height of the gantry holding up the printer head. If an object is higher " "then this then you cannot print multiple objects one for one. 60mm for an " "Ultimaker." msgstr "" #: Cura/util/profile.py:388 #, python-format msgid "More flow then 150% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:389 #, python-format msgid "More flow then 50% is rare and usually not recommended." msgstr "" #: Cura/util/profile.py:390 #, python-format msgid "" "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and " "are not recommended." msgstr "" #: Cura/util/profile.py:392 msgid "" "It is highly unlikely that your machine can achieve a printing speed above " "150mm/s" msgstr "" #: Cura/util/profile.py:394 Cura/util/profile.py:395 Cura/util/profile.py:396 #: Cura/util/profile.py:397 msgid "Temperatures above 260C could damage your machine, be careful!" msgstr "" #: Cura/util/profile.py:398 Cura/util/profile.py:399 Cura/util/profile.py:400 #: Cura/util/profile.py:401 msgid "" "Are you sure your filament is that thick? Normal filament is around 3mm or " "1.75mm." msgstr "" #: Cura/util/profile.py:402 msgid "" "It is highly unlikely that your machine can achieve a travel speed above " "300mm/s" msgstr "" #: Cura/util/profile.py:403 #, python-format msgid "" "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad " "results and is not recommended." msgstr ""