resources/machine_profiles/julia.ini

   1 [machine]
   2 machine_name = FracktalWorks Julia
   3 machine_type = Julia
   4 machine_width = 210
   5 machine_depth = 250
   6 machine_height = 270
   7 machine_center_is_zero = False
   8 has_heated_bed = True
   9 gcode_flavor = RepRap (Marlin/Sprinter)
  10 extruder_amount = 1
  11
  12 [profile]
  13 layer_height = 0.2
  14 wall_thickness = 0.4
  15 retraction_enable = True
  16 solid_layer_thickness = 0.6
  17 fill_density = 15
  18 nozzle_size = 0.4
  19 print_speed = 60
  20 print_temperature = 230
  21 print_temperature2 = 0
  22 print_temperature3 = 0
  23 print_temperature4 = 0
  24 print_bed_temperature = 80
  25 support = None
  26 platform_adhesion = None
  27 support_dual_extrusion = Both
  28 filament_diameter = 1.75
  29 filament_diameter2 = 0
  30 filament_diameter3 = 0
  31 filament_diameter4 = 0
  32 filament_flow = 100
  33 retraction_speed = 50.0
  34 bottom_thickness = 0.20
  35 layer0_width_factor = 100
  36 overlap_dual = 0.15
  37 travel_speed = 150.0
  38 bottom_layer_speed = 20
  39 infill_speed = 0
  40 inset0_speed = 40
  41 insetx_speed = 50
  42 cool_min_layer_time = 5
  43 fan_enabled = True
  44 skirt_line_count = 1
  45 skirt_gap = 3.0
  46 skirt_minimal_length = 150.0
  47 fan_full_height = 0.5
  48 fan_speed = 100
  49 fan_speed_max = 100
  50 cool_min_feedrate = 10
  51 cool_head_lift = False
  52 solid_top = True
  53 solid_bottom = True
  54 fill_overlap = 15
  55 support_type = Lines
  56 support_angle = 60
  57 support_fill_rate = 15
  58 support_xy_distance = 1.2
  59 support_z_distance = 0.1
  60 spiralize = False
  61 simple_mode = False
  62 brim_line_count = 20
  63 raft_margin = 5.0
  64 raft_line_spacing = 3.0
  65 raft_base_thickness = 0.3
  66 raft_base_linewidth = 1.0
  67 raft_interface_thickness = 0.27
  68 raft_interface_linewidth = 0.4
  69 raft_airgap_all = 0.05
  70 raft_airgap = 0.22
  71 raft_surface_layers = 2
  72 raft_surface_thickness = 0.27
  73 raft_surface_linewidth = 0.4
  74 fix_horrible_union_all_type_a = True
  75 fix_horrible_union_all_type_b = False
  76 fix_horrible_use_open_bits = False
  77 fix_horrible_extensive_stitching = False
  78 plugin_config =
  79 object_center_x = -1
  80 object_center_y = -1