1 # SOME DESCRIPTIVE TITLE.
\r
3 # This file is distributed under the same license as the Cura package.
\r
4 # Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
\r
8 "Project-Id-Version: Cura\n"
\r
9 "Report-Msgid-Bugs-To: \n"
\r
10 "POT-Creation-Date: 2014-10-13 09:32+0200\n"
\r
11 "PO-Revision-Date: 2014-09-29 16:02+0800\n"
\r
12 "Last-Translator: \n"
\r
13 "Language-Team: coloz <clz@clz.me>\n"
\r
14 "MIME-Version: 1.0\n"
\r
15 "Content-Type: text/plain; charset=UTF-8\n"
\r
16 "Content-Transfer-Encoding: 8bit\n"
\r
17 "X-Generator: Poedit 1.6.8\n"
\r
18 "Language: zh_Hans_CN\n"
\r
19 "Plural-Forms: nplurals=1; plural=0;\n"
\r
21 #: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566
\r
22 msgid "A new version of Cura is available, would you like to download?"
\r
25 #: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566
\r
26 msgid "New version available"
\r
29 #: Cura/gui/configWizard.py:231
\r
30 msgid "Add new machine wizard"
\r
33 #: Cura/gui/configWizard.py:233
\r
34 msgid "First time run wizard"
\r
37 #: Cura/gui/configWizard.py:234
\r
38 msgid "Welcome, and thanks for trying Cura!"
\r
41 #: Cura/gui/configWizard.py:236
\r
42 msgid "This wizard will help you in setting up Cura for your machine."
\r
43 msgstr "向导将协助你,为你的机型配置Cura"
\r
45 #: Cura/gui/configWizard.py:239
\r
47 msgid "Select your language:"
\r
50 #: Cura/gui/configWizard.py:280
\r
51 msgid "Select which Printrbot machine you have:"
\r
54 #: Cura/gui/configWizard.py:317
\r
55 msgid "The following pre-defined machine profiles are available"
\r
58 #: Cura/gui/configWizard.py:318
\r
60 "Note that these profiles are not guaranteed to give good results,\n"
\r
61 "or work at all. Extra tweaks might be required.\n"
\r
62 "If you find issues with the predefined profiles,\n"
\r
63 "or want an extra profile.\n"
\r
64 "Please report it at the github issue tracker."
\r
67 #: Cura/gui/configWizard.py:348
\r
68 msgid "Cura is now ready to be used!"
\r
71 #: Cura/gui/configWizard.py:353
\r
73 "RepRap machines can be vastly different, so here you can set your own "
\r
77 #: Cura/gui/configWizard.py:354
\r
79 "Be sure to review the default profile before running it on your machine."
\r
82 #: Cura/gui/configWizard.py:355
\r
84 "If you like a default profile for your machine added,\n"
\r
85 "then make an issue on github."
\r
88 #: Cura/gui/configWizard.py:357
\r
89 msgid "You will have to manually install Marlin or Sprinter firmware."
\r
92 #: Cura/gui/configWizard.py:359
\r
93 msgid "Machine name"
\r
96 #: Cura/gui/configWizard.py:360
\r
97 msgid "Machine width (mm)"
\r
100 #: Cura/gui/configWizard.py:361
\r
101 msgid "Machine depth (mm)"
\r
104 #: Cura/gui/configWizard.py:362
\r
105 msgid "Machine height (mm)"
\r
108 #: Cura/gui/configWizard.py:363 Cura/util/profile.py:175
\r
109 msgid "Nozzle size (mm)"
\r
112 #: Cura/gui/configWizard.py:364 Cura/util/profile.py:503
\r
116 #: Cura/gui/configWizard.py:365
\r
117 msgid "Bed center is 0,0,0 (RoStock)"
\r
118 msgstr "平台中心为0,0,0"
\r
120 #: Cura/gui/configWizard.py:385
\r
121 msgid "Select your machine"
\r
124 #: Cura/gui/configWizard.py:386
\r
125 msgid "What kind of machine do you have:"
\r
128 #: Cura/gui/configWizard.py:401
\r
130 msgid "Other (Ex: RepRap, MakerBot, Witbox)"
\r
131 msgstr "其他机型(如MostFun Sail)"
\r
133 #: Cura/gui/configWizard.py:404
\r
135 "The collection of anonymous usage information helps with the continued "
\r
136 "improvement of Cura."
\r
139 #: Cura/gui/configWizard.py:405
\r
141 "This does NOT submit your models online nor gathers any privacy related "
\r
145 #: Cura/gui/configWizard.py:406
\r
146 msgid "Submit anonymous usage information:"
\r
149 #: Cura/gui/configWizard.py:407
\r
150 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
\r
153 #: Cura/gui/configWizard.py:524
\r
154 msgid "Select upgraded parts you have"
\r
157 #: Cura/gui/configWizard.py:525
\r
159 "To assist you in having better default settings for your Ultimaker\n"
\r
160 "Cura would like to know which upgrades you have in your machine."
\r
163 #: Cura/gui/configWizard.py:527
\r
164 msgid "Extruder drive upgrade"
\r
167 #: Cura/gui/configWizard.py:528
\r
168 msgid "Heated printer bed (kit)"
\r
171 #: Cura/gui/configWizard.py:529
\r
172 msgid "Heated printer bed (self built)"
\r
175 #: Cura/gui/configWizard.py:530
\r
176 msgid "Dual extrusion (experimental)"
\r
179 #: Cura/gui/configWizard.py:532
\r
181 "If you have an Ultimaker bought after october 2012 you will have the\n"
\r
182 "Extruder drive upgrade. If you do not have this upgrade,\n"
\r
183 "it is highly recommended to improve reliability."
\r
186 #: Cura/gui/configWizard.py:533
\r
188 "This upgrade can be bought from the Ultimaker webshop\n"
\r
189 "or found on thingiverse as thing:26094"
\r
192 #: Cura/gui/configWizard.py:555
\r
193 msgid "Upgrade Ultimaker Firmware"
\r
196 #: Cura/gui/configWizard.py:556
\r
198 "Firmware is the piece of software running directly on your 3D printer.\n"
\r
199 "This firmware controls the step motors, regulates the temperature\n"
\r
200 "and ultimately makes your printer work."
\r
203 #: Cura/gui/configWizard.py:558
\r
205 "The firmware shipping with new Ultimakers works, but upgrades\n"
\r
206 "have been made to make better prints, and make calibration easier."
\r
209 #: Cura/gui/configWizard.py:560
\r
211 "Cura requires these new features and thus\n"
\r
212 "your firmware will most likely need to be upgraded.\n"
\r
213 "You will get the chance to do so now."
\r
216 #: Cura/gui/configWizard.py:566
\r
217 msgid "Do not upgrade to this firmware if:"
\r
220 #: Cura/gui/configWizard.py:567
\r
221 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
\r
224 #: Cura/gui/configWizard.py:568
\r
225 msgid "* Build your own heated bed"
\r
228 #: Cura/gui/configWizard.py:569
\r
229 msgid "* Have other changes in the firmware"
\r
232 #: Cura/gui/configWizard.py:603
\r
234 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"
\r
235 "You can skip these if you know your machine is functional."
\r
238 #: Cura/gui/configWizard.py:604
\r
242 #: Cura/gui/configWizard.py:604
\r
243 msgid "Skip checks"
\r
246 #: Cura/gui/configWizard.py:608
\r
247 msgid "Communication:"
\r
250 #: Cura/gui/configWizard.py:609
\r
251 msgid "Temperature:"
\r
254 #: Cura/gui/configWizard.py:610
\r
258 #: Cura/gui/configWizard.py:615
\r
259 msgid "Show error log"
\r
262 #: Cura/gui/configWizard.py:649
\r
263 msgid "Connecting to machine."
\r
266 #: Cura/gui/configWizard.py:670
\r
267 msgid "Cooldown before temperature check."
\r
270 #: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683
\r
271 msgid "Checking the heater and temperature sensor."
\r
274 #: Cura/gui/configWizard.py:694
\r
275 msgid "Please make sure none of the endstops are pressed."
\r
278 #: Cura/gui/configWizard.py:707
\r
279 msgid "Temperature measurement FAILED!"
\r
282 #: Cura/gui/configWizard.py:712
\r
284 msgid "Head temperature: %d"
\r
287 #: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728
\r
289 msgid "Communication State: %s"
\r
292 #: Cura/gui/configWizard.py:722
\r
293 msgid "Failed to establish connection with the printer."
\r
296 #: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777
\r
297 msgid "Please press the left X endstop."
\r
300 #: Cura/gui/configWizard.py:772
\r
301 msgid "Please press the right X endstop."
\r
304 #: Cura/gui/configWizard.py:782
\r
305 msgid "Please press the front Y endstop."
\r
308 #: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797
\r
309 msgid "Please press the top Z endstop."
\r
312 #: Cura/gui/configWizard.py:792
\r
313 msgid "Please press the back Y endstop."
\r
316 #: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817
\r
317 msgid "Checkup finished"
\r
320 #: Cura/gui/configWizard.py:811
\r
321 msgid "Please press the bottom Z endstop."
\r
324 #: Cura/gui/configWizard.py:860
\r
325 msgid "Calibrating the Steps Per E requires some manual actions."
\r
328 #: Cura/gui/configWizard.py:861
\r
329 msgid "First remove any filament from your machine."
\r
332 #: Cura/gui/configWizard.py:862
\r
334 "Next put in your filament so the tip is aligned with the\n"
\r
335 "top of the extruder drive."
\r
338 #: Cura/gui/configWizard.py:863
\r
339 msgid "We'll push the filament 100mm"
\r
342 #: Cura/gui/configWizard.py:864
\r
343 msgid "Extrude 100mm filament"
\r
346 #: Cura/gui/configWizard.py:865
\r
348 "Now measure the amount of extruded filament:\n"
\r
349 "(this can be more or less then 100mm)"
\r
352 #: Cura/gui/configWizard.py:866
\r
356 #: Cura/gui/configWizard.py:867
\r
357 msgid "This results in the following steps per E:"
\r
360 #: Cura/gui/configWizard.py:869
\r
361 msgid "You can repeat these steps to get better calibration."
\r
364 #: Cura/gui/configWizard.py:872
\r
366 "If you still have filament in your printer which needs\n"
\r
367 "heat to remove, press the heat up button below:"
\r
370 #: Cura/gui/configWizard.py:873
\r
371 msgid "Heatup for filament removal"
\r
374 #: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932
\r
376 "Error: Failed to open serial port to machine\n"
\r
377 "If this keeps happening, try disconnecting and reconnecting the USB cable"
\r
380 #: Cura/gui/firmwareInstall.py:58
\r
382 "I am sorry, but Cura does not ship with a default firmware for your machine "
\r
386 #: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62
\r
387 #: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508
\r
388 msgid "Firmware update"
\r
391 #: Cura/gui/firmwareInstall.py:62
\r
393 "Cura only supports firmware updates for ATMega2560 based hardware.\n"
\r
394 "So updating your RepRap with Cura might or might not work."
\r
396 "Cura仅支持基于ATmega2560的机型升级\n"
\r
397 "升级固件后也许大概有可能你的打印机无法正常工作"
\r
399 #: Cura/gui/firmwareInstall.py:70
\r
403 #: Cura/gui/firmwareInstall.py:91
\r
404 msgid "Reading firmware..."
\r
407 #: Cura/gui/firmwareInstall.py:93
\r
408 msgid "Connecting to machine..."
\r
411 #: Cura/gui/firmwareInstall.py:97
\r
413 "Please connect the printer to\n"
\r
414 "your computer with the USB cable."
\r
417 #: Cura/gui/firmwareInstall.py:116
\r
419 "Failed to find machine for firmware upgrade\n"
\r
420 "Is your machine connected to the PC?"
\r
423 #: Cura/gui/firmwareInstall.py:121
\r
424 msgid "Uploading firmware..."
\r
427 #: Cura/gui/firmwareInstall.py:124
\r
431 "Installed firmware: %s"
\r
436 #: Cura/gui/firmwareInstall.py:126
\r
437 msgid "Failed to write firmware.\n"
\r
440 #: Cura/gui/mainWindow.py:66
\r
441 msgid "Load model file...\tCTRL+L"
\r
442 msgstr "读取模型文件...\tCTRL+L"
\r
444 #: Cura/gui/mainWindow.py:68
\r
445 msgid "Save model...\tCTRL+S"
\r
446 msgstr "保存模型...\tCTRL+S"
\r
448 #: Cura/gui/mainWindow.py:70
\r
449 msgid "Reload platform\tF5"
\r
450 msgstr "重新载入模型\tF5"
\r
452 #: Cura/gui/mainWindow.py:72
\r
453 msgid "Clear platform"
\r
456 #: Cura/gui/mainWindow.py:76
\r
457 msgid "Print...\tCTRL+P"
\r
458 msgstr "打印...\tCTRL+P"
\r
460 #: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279
\r
461 msgid "Save GCode..."
\r
462 msgstr "保存GCode..."
\r
464 #: Cura/gui/mainWindow.py:80
\r
465 msgid "Show slice engine log..."
\r
466 msgstr "显示切片引擎记录..."
\r
468 #: Cura/gui/mainWindow.py:84
\r
469 msgid "Open Profile..."
\r
472 #: Cura/gui/mainWindow.py:87
\r
473 msgid "Save Profile..."
\r
476 #: Cura/gui/mainWindow.py:90
\r
477 msgid "Load Profile from GCode..."
\r
478 msgstr "从Gcode中读取配置文件..."
\r
480 #: Cura/gui/mainWindow.py:94
\r
481 msgid "Reset Profile to default"
\r
484 #: Cura/gui/mainWindow.py:99
\r
485 msgid "Preferences...\tCTRL+,"
\r
486 msgstr "偏好配置......\tCTRL+,"
\r
488 #: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434
\r
489 msgid "Machine settings..."
\r
492 #: Cura/gui/mainWindow.py:107
\r
493 msgid "Recent Model Files"
\r
496 #: Cura/gui/mainWindow.py:114
\r
497 msgid "Recent Profile Files"
\r
500 #: Cura/gui/mainWindow.py:120
\r
504 #: Cura/gui/mainWindow.py:122
\r
508 #: Cura/gui/mainWindow.py:130
\r
509 msgid "Minecraft map import..."
\r
510 msgstr "导入Minecraft地图..."
\r
512 #: Cura/gui/mainWindow.py:134
\r
513 msgid "PID Debugger..."
\r
516 #: Cura/gui/mainWindow.py:137
\r
517 msgid "Copy profile to clipboard"
\r
520 #: Cura/gui/mainWindow.py:141
\r
521 msgid "Print all at once"
\r
524 #: Cura/gui/mainWindow.py:143
\r
525 msgid "Print one at a time"
\r
528 #: Cura/gui/mainWindow.py:150
\r
532 #: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175
\r
536 #: Cura/gui/mainWindow.py:159
\r
537 msgid "Switch to quickprint..."
\r
538 msgstr "切换到快速打印模式..."
\r
540 #: Cura/gui/mainWindow.py:163
\r
541 msgid "Switch to full settings..."
\r
542 msgstr "切换到完整配置模式..."
\r
544 #: Cura/gui/mainWindow.py:168
\r
545 msgid "Open expert settings...\tCTRL+E"
\r
546 msgstr "额外设置...\tCTRL+E"
\r
548 #: Cura/gui/mainWindow.py:172
\r
549 msgid "Run first run wizard..."
\r
550 msgstr "运行首次使用向导..."
\r
552 #: Cura/gui/mainWindow.py:174
\r
553 msgid "Run bed leveling wizard..."
\r
554 msgstr "运行平台调平向导..."
\r
556 #: Cura/gui/mainWindow.py:176
\r
557 msgid "Run head offset wizard..."
\r
558 msgstr "运行多喷头校正向导..."
\r
560 #: Cura/gui/mainWindow.py:179
\r
564 #: Cura/gui/mainWindow.py:182
\r
565 msgid "Online documentation..."
\r
568 #: Cura/gui/mainWindow.py:184
\r
569 msgid "Report a problem..."
\r
572 #: Cura/gui/mainWindow.py:186
\r
573 msgid "Check for update..."
\r
576 #: Cura/gui/mainWindow.py:188
\r
577 msgid "Open YouMagine website..."
\r
578 msgstr "打开YouMagine网站..."
\r
580 #: Cura/gui/mainWindow.py:190
\r
581 msgid "About Cura..."
\r
584 #: Cura/gui/mainWindow.py:192
\r
588 #: Cura/gui/mainWindow.py:343
\r
590 "For \"One at a time\" printing, you need to have entered the correct head "
\r
591 "size and gantry height in the machine settings"
\r
594 #: Cura/gui/mainWindow.py:343
\r
595 msgid "One at a time warning"
\r
598 #: Cura/gui/mainWindow.py:440
\r
599 msgid "Install default firmware..."
\r
602 #: Cura/gui/mainWindow.py:443
\r
603 msgid "Install custom firmware..."
\r
606 #: Cura/gui/mainWindow.py:447
\r
607 msgid "Select profile file to load"
\r
610 #: Cura/gui/mainWindow.py:459
\r
611 msgid "Select gcode file to load profile from"
\r
614 #: Cura/gui/mainWindow.py:474
\r
616 "No profile found in GCode file.\n"
\r
617 "This feature only works with GCode files made by Cura 12.07 or newer."
\r
620 #: Cura/gui/mainWindow.py:474
\r
621 msgid "Profile load error"
\r
624 #: Cura/gui/mainWindow.py:478
\r
625 msgid "Select profile file to save"
\r
628 #: Cura/gui/mainWindow.py:488
\r
630 "This will reset all profile settings to defaults.\n"
\r
631 "Unless you have saved your current profile, all settings will be lost!\n"
\r
632 "Do you really want to reset?"
\r
635 #: Cura/gui/mainWindow.py:488
\r
636 msgid "Profile reset"
\r
639 #: Cura/gui/mainWindow.py:508
\r
641 "Warning: Installing a custom firmware does not guarantee that you machine "
\r
642 "will function correctly, and could damage your machine."
\r
645 #: Cura/gui/mainWindow.py:509
\r
646 msgid "Open firmware to upload"
\r
649 #: Cura/gui/mainWindow.py:569
\r
650 msgid "You are running the latest version of Cura!"
\r
651 msgstr "你正在运行最新版本的的Cura!"
\r
653 #: Cura/gui/mainWindow.py:569
\r
657 #: Cura/gui/mainWindow.py:624
\r
661 #: Cura/gui/pluginPanel.py:27
\r
665 #: Cura/gui/pluginPanel.py:31
\r
666 msgid "Open plugin location"
\r
669 #: Cura/gui/pluginPanel.py:32
\r
670 msgid "Enabled plugins"
\r
673 #: Cura/gui/pluginPanel.py:134
\r
674 msgid "You need to select a plugin before you can add anything."
\r
677 #: Cura/gui/pluginPanel.py:134
\r
678 msgid "Error: no plugin selected"
\r
679 msgstr "错误:没有插件可供选择"
\r
681 #: Cura/gui/preferencesDialog.py:28
\r
682 msgid "Print window"
\r
685 #: Cura/gui/preferencesDialog.py:31
\r
689 #: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478
\r
693 #: Cura/gui/preferencesDialog.py:40
\r
694 msgid "Filament settings"
\r
697 #: Cura/gui/preferencesDialog.py:50
\r
698 msgid "Cura settings"
\r
701 #: Cura/gui/preferencesDialog.py:84
\r
702 msgid "Machine settings"
\r
705 #: Cura/gui/preferencesDialog.py:95
\r
706 msgid "Printer head size"
\r
709 #: Cura/gui/preferencesDialog.py:103
\r
711 msgid "Extruder %d"
\r
714 #: Cura/gui/preferencesDialog.py:107
\r
715 msgid "Communication settings"
\r
718 #: Cura/gui/preferencesDialog.py:154
\r
719 msgid "Cannot remove the last machine configuration in Cura"
\r
722 #: Cura/gui/preferencesDialog.py:154
\r
723 msgid "Machine remove error"
\r
726 #: Cura/gui/preferencesDialog.py:168
\r
727 msgid "Enter the new name:"
\r
730 #: Cura/gui/preferencesDialog.py:168
\r
731 msgid "Change machine name"
\r
734 #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
\r
736 msgid "Printing on %s"
\r
739 #: Cura/gui/printWindow.py:324
\r
741 "Your computer is running on battery power.\n"
\r
742 "Connect your computer to AC power or your print might not finish."
\r
745 #: Cura/gui/printWindow.py:334
\r
747 "InfoLine from printer connection\n"
\r
748 "InfoLine from dialog\n"
\r
750 "More lines for layout\n"
\r
751 "More lines for layout\n"
\r
752 "More lines for layout"
\r
755 #: Cura/gui/printWindow.py:336
\r
759 #: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
\r
763 #: Cura/gui/printWindow.py:339
\r
767 #: Cura/gui/printWindow.py:340
\r
768 msgid "Cancel print"
\r
771 #: Cura/gui/printWindow.py:341
\r
775 #: Cura/gui/sceneView.py:64
\r
779 #: Cura/gui/sceneView.py:69
\r
783 #: Cura/gui/sceneView.py:70
\r
787 #: Cura/gui/sceneView.py:71
\r
791 #: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
\r
795 #: Cura/gui/sceneView.py:74
\r
799 #: Cura/gui/sceneView.py:77
\r
803 #: Cura/gui/sceneView.py:79
\r
807 #: Cura/gui/sceneView.py:80
\r
811 #: Cura/gui/sceneView.py:81
\r
815 #: Cura/gui/sceneView.py:89
\r
819 #: Cura/gui/sceneView.py:91
\r
823 #: Cura/gui/sceneView.py:93
\r
827 #: Cura/gui/sceneView.py:95
\r
828 msgid "Size X (mm)"
\r
829 msgstr "Size X (mm)"
\r
831 #: Cura/gui/sceneView.py:97
\r
832 msgid "Size Y (mm)"
\r
833 msgstr "Size Y (mm)"
\r
835 #: Cura/gui/sceneView.py:99
\r
836 msgid "Size Z (mm)"
\r
837 msgstr "Size Z (mm)"
\r
839 #: Cura/gui/sceneView.py:101
\r
840 msgid "Uniform scale"
\r
843 #: Cura/gui/sceneView.py:104
\r
847 #: Cura/gui/sceneView.py:104
\r
851 #: Cura/gui/sceneView.py:104
\r
855 #: Cura/gui/sceneView.py:104
\r
856 msgid "Transparent"
\r
859 #: Cura/gui/sceneView.py:104
\r
863 #: Cura/gui/sceneView.py:104
\r
867 #: Cura/gui/sceneView.py:106
\r
868 msgid "Share on YouMagine"
\r
871 #: Cura/gui/sceneView.py:204
\r
872 msgid "Open 3D model"
\r
875 #: Cura/gui/sceneView.py:229
\r
876 msgid "Save 3D model"
\r
879 #: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915
\r
881 msgid "Print with %s"
\r
884 #: Cura/gui/sceneView.py:280
\r
885 msgid "Slice engine log..."
\r
888 #: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918
\r
889 msgid "Save toolpath"
\r
892 #: Cura/gui/sceneView.py:352
\r
893 msgid "The slicing engine reported the following"
\r
896 #: Cura/gui/sceneView.py:352
\r
897 msgid "Engine log..."
\r
900 #: Cura/gui/sceneView.py:491
\r
901 msgid "How many copies do you want?"
\r
904 #: Cura/gui/sceneView.py:491
\r
905 msgid "Number of copies"
\r
908 #: Cura/gui/sceneView.py:491
\r
912 #: Cura/gui/sceneView.py:781
\r
913 msgid "Center on platform"
\r
916 #: Cura/gui/sceneView.py:782
\r
917 msgid "Delete object"
\r
920 #: Cura/gui/sceneView.py:783
\r
921 msgid "Multiply object"
\r
924 #: Cura/gui/sceneView.py:784
\r
925 msgid "Split object into parts"
\r
928 #: Cura/gui/sceneView.py:786
\r
929 msgid "Dual extrusion merge"
\r
932 #: Cura/gui/sceneView.py:788
\r
933 msgid "Delete all objects"
\r
936 #: Cura/gui/sceneView.py:789
\r
937 msgid "Reload all objects"
\r
940 #: Cura/gui/sceneView.py:912
\r
941 msgid "Toolpath to SD"
\r
944 #: Cura/gui/sceneView.py:1206
\r
945 msgid "Overhang view not working due to lack of OpenGL shaders support."
\r
948 #: Cura/gui/simpleMode.py:19
\r
949 msgid "High quality print"
\r
952 #: Cura/gui/simpleMode.py:20
\r
953 msgid "Normal quality print"
\r
956 #: Cura/gui/simpleMode.py:21
\r
957 msgid "Fast low quality print"
\r
960 #: Cura/gui/simpleMode.py:22
\r
961 msgid "Thin walled cup or vase"
\r
964 #: Cura/gui/simpleMode.py:32
\r
965 msgid "Print support structure"
\r
968 #: Cura/gui/simpleMode.py:37
\r
969 msgid "Select a quickprint profile:"
\r
972 #: Cura/gui/simpleMode.py:47
\r
976 #: Cura/gui/simpleMode.py:51
\r
980 #: Cura/gui/simpleMode.py:57
\r
984 #: Cura/gui/simpleMode.py:85
\r
985 msgid "Exterior Only"
\r
988 #: Cura/gui/tools/imageToMesh.py:28
\r
989 msgid "Height (mm)"
\r
992 #: Cura/gui/tools/imageToMesh.py:32
\r
996 #: Cura/gui/tools/imageToMesh.py:36
\r
1000 #: Cura/gui/tools/imageToMesh.py:40
\r
1001 msgid "Depth (mm)"
\r
1004 #: Cura/gui/tools/projector.py:42
\r
1008 #: Cura/gui/tools/projector.py:43
\r
1012 #: Cura/gui/tools/projector.py:44
\r
1016 #: Cura/gui/tools/projector.py:45
\r
1017 msgid "Draw curves"
\r
1020 #: Cura/gui/tools/youmagineGui.py:78
\r
1021 msgid "Checking token"
\r
1024 #: Cura/gui/tools/youmagineGui.py:82
\r
1025 msgid "Failed to contact YouMagine.com"
\r
1028 #: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
\r
1029 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
\r
1030 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
\r
1031 msgid "YouMagine error."
\r
1034 #: Cura/gui/tools/youmagineGui.py:100
\r
1035 msgid "Cura is now authorized to share on YouMagine"
\r
1038 #: Cura/gui/tools/youmagineGui.py:100
\r
1039 msgid "YouMagine."
\r
1042 #: Cura/gui/tools/youmagineGui.py:112
\r
1043 msgid "Creating new design on YouMagine..."
\r
1046 #: Cura/gui/tools/youmagineGui.py:116
\r
1047 msgid "Failed to create a design, nothing uploaded!"
\r
1050 #: Cura/gui/tools/youmagineGui.py:120
\r
1052 msgid "Building model %s..."
\r
1055 #: Cura/gui/tools/youmagineGui.py:131
\r
1057 msgid "Uploading model %s..."
\r
1060 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
\r
1061 #: Cura/gui/tools/youmagineGui.py:148
\r
1063 msgid "Failed to upload %s!"
\r
1066 #: Cura/gui/tools/youmagineGui.py:137
\r
1068 msgid "Uploading file %s..."
\r
1071 #: Cura/gui/tools/youmagineGui.py:145
\r
1073 msgid "Uploading image %s..."
\r
1076 #: Cura/gui/tools/youmagineGui.py:153
\r
1077 msgid "Failed to upload snapshot!"
\r
1080 #: Cura/gui/tools/youmagineGui.py:158
\r
1081 msgid "Publishing design..."
\r
1084 #: Cura/gui/tools/youmagineGui.py:230
\r
1085 msgid "Request authorization from YouMagine"
\r
1088 #: Cura/gui/tools/youmagineGui.py:231
\r
1089 msgid "Paste token here"
\r
1092 #: Cura/gui/tools/youmagineGui.py:237
\r
1094 "To share your designs on YouMagine\n"
\r
1095 "you need an account on YouMagine.com\n"
\r
1096 "and authorize Cura to access your account."
\r
1099 #: Cura/gui/tools/youmagineGui.py:239
\r
1101 "This will open a browser window where you can\n"
\r
1102 "authorize Cura to access your YouMagine account.\n"
\r
1103 "You can revoke access at any time\n"
\r
1104 "from YouMagine.com"
\r
1107 #: Cura/gui/tools/youmagineGui.py:274
\r
1108 msgid "Design name"
\r
1111 #: Cura/gui/tools/youmagineGui.py:278
\r
1112 msgid "Publish after upload"
\r
1115 #: Cura/gui/tools/youmagineGui.py:279
\r
1119 #: Cura/gui/tools/youmagineGui.py:287
\r
1123 #: Cura/gui/tools/youmagineGui.py:289
\r
1127 #: Cura/gui/tools/youmagineGui.py:299
\r
1129 "Directly publish the design after uploading.\n"
\r
1130 "Without this check the design will not be public\n"
\r
1131 "until you publish it yourself on YouMagine.com"
\r
1134 #: Cura/gui/tools/youmagineGui.py:305
\r
1135 msgid "Design name:"
\r
1138 #: Cura/gui/tools/youmagineGui.py:307
\r
1139 msgid "Description:"
\r
1142 #: Cura/gui/tools/youmagineGui.py:309
\r
1146 #: Cura/gui/tools/youmagineGui.py:311
\r
1150 #: Cura/gui/tools/youmagineGui.py:314
\r
1154 #: Cura/gui/tools/youmagineGui.py:317
\r
1155 msgid "Related design files:"
\r
1158 #: Cura/gui/tools/youmagineGui.py:340
\r
1159 msgid "The name cannot be empty"
\r
1162 #: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
\r
1163 msgid "New design error."
\r
1166 #: Cura/gui/tools/youmagineGui.py:344
\r
1167 msgid "The description cannot be empty"
\r
1170 #: Cura/gui/tools/youmagineGui.py:370
\r
1171 msgid "No webcam found on your system"
\r
1174 #: Cura/gui/tools/youmagineGui.py:370
\r
1175 msgid "Webcam error"
\r
1178 #: Cura/gui/util/engineResultView.py:168
\r
1180 msgid "Loading toolpath for visualization (%d%%)"
\r
1183 #: Cura/gui/util/openglGui.py:242
\r
1184 msgid "An error has occurred during the 3D view drawing."
\r
1187 #: Cura/gui/util/openglGui.py:250
\r
1188 msgid "3D window error"
\r
1191 #: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172
\r
1192 #: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202
\r
1193 #: Cura/util/profile.py:204
\r
1197 #: Cura/util/profile.py:170
\r
1198 msgid "Layer height (mm)"
\r
1201 #: Cura/util/profile.py:170
\r
1203 "Layer height in millimeters.\n"
\r
1204 "This is the most important setting to determine the quality of your print. "
\r
1205 "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
\r
1206 "0.25mm with an Ultimaker for very fast prints at low quality."
\r
1210 "普通质量可设置为0.2mm,高质量设为0.1mm。\n"
\r
1213 #: Cura/util/profile.py:171
\r
1214 msgid "Shell thickness (mm)"
\r
1217 #: Cura/util/profile.py:171
\r
1219 "Thickness of the outside shell in the horizontal direction.\n"
\r
1220 "This is used in combination with the nozzle size to define the number\n"
\r
1221 "of perimeter lines and the thickness of those perimeter lines."
\r
1224 "通常需要结合你的喷嘴孔径设置成相应倍数,这个参数决定了边缘的走线次数和厚度"
\r
1226 #: Cura/util/profile.py:172
\r
1227 msgid "Enable retraction"
\r
1230 #: Cura/util/profile.py:172
\r
1232 "Retract the filament when the nozzle is moving over a none-printed area. "
\r
1233 "Details about the retraction can be configured in the advanced tab."
\r
1235 "当在非打印区域移动喷头时,适当的回退丝能避免多余的挤出和拉丝\n"
\r
1238 #: Cura/util/profile.py:173 Cura/util/profile.py:174
\r
1242 #: Cura/util/profile.py:173
\r
1243 msgid "Bottom/Top thickness (mm)"
\r
1244 msgstr "底层/顶层厚度(mm)"
\r
1246 #: Cura/util/profile.py:173
\r
1248 "This controls the thickness of the bottom and top layers, the amount of "
\r
1249 "solid layers put down is calculated by the layer thickness and this value.\n"
\r
1250 "Having this value a multiple of the layer thickness makes sense. And keep it "
\r
1251 "near your wall thickness to make an evenly strong part."
\r
1253 "这个参数控制底层和顶层的厚度,通过层厚和这个参数计算需打印出的实心层的数量\n"
\r
1254 "这个数值应是层厚的倍数。让这个参数接近你的壁厚,可以让模型强度更均匀"
\r
1256 #: Cura/util/profile.py:174
\r
1257 msgid "Fill Density (%)"
\r
1260 #: Cura/util/profile.py:174
\r
1262 "This controls how densely filled the insides of your print will be. For a "
\r
1263 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "
\r
1265 "This won't affect the outside of the print and only adjusts how strong the "
\r
1269 "打印实心物体需设置为100%,空心物体设置为0%。通常使用20%填充率\n"
\r
1270 "这个参数不会影响物体的外观,它一般用来调整物体的强度"
\r
1272 #: Cura/util/profile.py:175
\r
1274 "The nozzle size is very important, this is used to calculate the line width "
\r
1275 "of the infill, and used to calculate the amount of outside wall lines and "
\r
1276 "thickness for the wall thickness you entered in the print settings."
\r
1277 msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"
\r
1279 #: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
\r
1280 #: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181
\r
1281 msgid "Speed and Temperature"
\r
1284 #: Cura/util/profile.py:176
\r
1285 msgid "Print speed (mm/s)"
\r
1286 msgstr "打印速度(mm/s)"
\r
1288 #: Cura/util/profile.py:176
\r
1290 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
\r
1291 "s, but for good quality prints you want to print slower. Printing speed "
\r
1292 "depends on a lot of factors. So you will be experimenting with optimal "
\r
1293 "settings for this."
\r
1296 "MostFun打印速度最快可达150mm/s,为获得更好的打印质量,我们建议打印速度设为"
\r
1298 "打印速度的设置要参考很多因素,你可以根据实际情况调试修改"
\r
1300 #: Cura/util/profile.py:177
\r
1301 msgid "Printing temperature (C)"
\r
1304 #: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179
\r
1305 #: Cura/util/profile.py:180
\r
1307 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"
\r
1308 "For PLA a value of 210C is usually used.\n"
\r
1309 "For ABS a value of 230C or higher is required."
\r
1315 #: Cura/util/profile.py:178
\r
1316 msgid "2nd nozzle temperature (C)"
\r
1319 #: Cura/util/profile.py:179
\r
1320 msgid "3th nozzle temperature (C)"
\r
1323 #: Cura/util/profile.py:180
\r
1324 msgid "4th nozzle temperature (C)"
\r
1327 #: Cura/util/profile.py:181
\r
1328 msgid "Bed temperature (C)"
\r
1331 #: Cura/util/profile.py:181
\r
1333 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
\r
1336 #: Cura/util/profile.py:182 Cura/util/profile.py:183
\r
1340 #: Cura/util/profile.py:182
\r
1341 msgid "Touching buildplate"
\r
1344 #: Cura/util/profile.py:182
\r
1345 msgid "Everywhere"
\r
1348 #: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184
\r
1349 #: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226
\r
1350 #: Cura/util/profile.py:227 Cura/util/profile.py:228
\r
1354 #: Cura/util/profile.py:182
\r
1355 msgid "Support type"
\r
1358 #: Cura/util/profile.py:182
\r
1360 "Type of support structure build.\n"
\r
1361 "\"Touching buildplate\" is the most commonly used support setting.\n"
\r
1363 "None does not do any support.\n"
\r
1364 "Touching buildplate only creates support where the support structure will "
\r
1365 "touch the build platform.\n"
\r
1366 "Everywhere creates support even on top of parts of the model."
\r
1369 "通常使用\"Touching buildplate\"建立支撑 \n"
\r
1370 "选择 None 不会建立支撑\n"
\r
1371 "选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"
\r
1372 "选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"
\r
1374 #: Cura/util/profile.py:183 Cura/util/profile.py:232
\r
1378 #: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234
\r
1379 #: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237
\r
1380 #: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240
\r
1384 #: Cura/util/profile.py:183
\r
1385 msgid "Platform adhesion type"
\r
1388 #: Cura/util/profile.py:183
\r
1390 "Different options that help in preventing corners from lifting due to "
\r
1392 "Brim adds a single layer thick flat area around your object which is easy to "
\r
1393 "cut off afterwards, and it is the recommended option.\n"
\r
1394 "Raft adds a thick raster below the object and a thin interface between this "
\r
1395 "and your object.\n"
\r
1396 "(Note that enabling the brim or raft disables the skirt)"
\r
1398 "开启这个选项可以防止底面起翘\n"
\r
1399 "Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"
\r
1400 "Raft会打印模型前打印一个网状底座\n"
\r
1401 "(注意:开启粘附平台后,会关闭打印开始前的边缘走线功能)"
\r
1403 #: Cura/util/profile.py:184
\r
1407 #: Cura/util/profile.py:184
\r
1408 msgid "First extruder"
\r
1411 #: Cura/util/profile.py:184
\r
1412 msgid "Second extruder"
\r
1415 #: Cura/util/profile.py:184
\r
1416 msgid "Support dual extrusion"
\r
1419 #: Cura/util/profile.py:184
\r
1421 "Which extruder to use for support material, for break-away support you can "
\r
1422 "use both extruders.\n"
\r
1423 "But if one of the materials is more expensive then the other you could "
\r
1424 "select an extruder to use for support material. This causes more extruder "
\r
1426 "You can also use the 2nd extruder for soluble support materials."
\r
1429 #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
\r
1430 msgid "Dual extrusion"
\r
1433 #: Cura/util/profile.py:185
\r
1434 msgid "Wipe&prime tower"
\r
1437 #: Cura/util/profile.py:185
\r
1439 "The wipe-tower is a tower printed on every layer when switching between "
\r
1441 "The old nozzle is wiped off on the tower before the new nozzle is used to "
\r
1442 "print the 2nd color."
\r
1445 #: Cura/util/profile.py:186
\r
1446 msgid "Wipe&prime tower volume per layer (mm3)"
\r
1449 #: Cura/util/profile.py:186
\r
1451 "The amount of material put in the wipe/prime tower.\n"
\r
1452 "This is done in volume because in general you want to extrude a\n"
\r
1453 "certain amount of volume to get the extruder going, independent on the layer "
\r
1455 "This means that with thinner layers, your tower gets bigger."
\r
1458 #: Cura/util/profile.py:187
\r
1459 msgid "Ooze shield"
\r
1462 #: Cura/util/profile.py:187
\r
1464 "The ooze shield is a 1 line thick shell around the object which stands a few "
\r
1465 "mm from the object.\n"
\r
1466 "This shield catches any oozing from the unused nozzle in dual-extrusion."
\r
1469 #: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190
\r
1470 #: Cura/util/profile.py:191 Cura/util/profile.py:192
\r
1474 #: Cura/util/profile.py:188
\r
1475 msgid "Diameter (mm)"
\r
1478 #: Cura/util/profile.py:188
\r
1480 "Diameter of your filament, as accurately as possible.\n"
\r
1481 "If you cannot measure this value you will have to calibrate it, a higher "
\r
1482 "number means less extrusion, a smaller number generates more extrusion."
\r
1485 "MostFun Sail使用的耗材的直径为1.75mm"
\r
1487 #: Cura/util/profile.py:189
\r
1488 msgid "Diameter2 (mm)"
\r
1491 #: Cura/util/profile.py:189
\r
1493 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
\r
1494 "as for nozzle 1."
\r
1497 #: Cura/util/profile.py:190
\r
1498 msgid "Diameter3 (mm)"
\r
1501 #: Cura/util/profile.py:190
\r
1503 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
\r
1504 "as for nozzle 1."
\r
1507 #: Cura/util/profile.py:191
\r
1508 msgid "Diameter4 (mm)"
\r
1511 #: Cura/util/profile.py:191
\r
1513 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
\r
1514 "as for nozzle 1."
\r
1517 #: Cura/util/profile.py:192
\r
1521 #: Cura/util/profile.py:192
\r
1523 "Flow compensation, the amount of material extruded is multiplied by this "
\r
1525 msgstr "流量补偿,最终挤出量是设定的挤出量乘以这个值"
\r
1527 #: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
\r
1528 #: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
\r
1529 #: Cura/util/profile.py:199
\r
1530 msgid "Retraction"
\r
1533 #: Cura/util/profile.py:193
\r
1534 msgid "Speed (mm/s)"
\r
1535 msgstr "回退速度(mm/s)"
\r
1537 #: Cura/util/profile.py:193
\r
1539 "Speed at which the filament is retracted, a higher retraction speed works "
\r
1540 "better. But a very high retraction speed can lead to filament grinding."
\r
1543 "设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"
\r
1545 #: Cura/util/profile.py:194
\r
1546 msgid "Distance (mm)"
\r
1549 #: Cura/util/profile.py:194
\r
1551 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
\r
1552 "seems to generate good results."
\r
1555 "设置为0时不会回退,在MostFun Sail设置为3mm时效果比较好"
\r
1557 #: Cura/util/profile.py:195
\r
1558 msgid "Dual extrusion switch amount (mm)"
\r
1561 #: Cura/util/profile.py:195
\r
1563 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
\r
1564 "no retraction at all. A value of 16.0mm seems to generate good results."
\r
1567 #: Cura/util/profile.py:196
\r
1568 msgid "Minimum travel (mm)"
\r
1569 msgstr "最小移动距离(mm)"
\r
1571 #: Cura/util/profile.py:196
\r
1573 "Minimum amount of travel needed for a retraction to happen at all. To make "
\r
1574 "sure you do not get a lot of retractions in a small area."
\r
1577 #: Cura/util/profile.py:197
\r
1578 msgid "Enable combing"
\r
1581 #: Cura/util/profile.py:197
\r
1583 "Combing is the act of avoiding holes in the print for the head to travel "
\r
1584 "over. If combing is disabled the printer head moves straight from the start "
\r
1585 "point to the end point and it will always retract."
\r
1587 "梳理功能可以避免喷头移动后产生的孔\n"
\r
1588 "如果关闭了该功能,打印头会在移动过程中一直处在回退状态"
\r
1590 #: Cura/util/profile.py:198
\r
1591 msgid "Minimal extrusion before retracting (mm)"
\r
1592 msgstr "回退前最小挤出量(mm)"
\r
1594 #: Cura/util/profile.py:198
\r
1596 "The minimal amount of extrusion that needs to be done before retracting "
\r
1597 "again if a retraction needs to happen before this minimal is reached the "
\r
1598 "retraction is ignored.\n"
\r
1599 "This avoids retracting a lot on the same piece of filament which flattens "
\r
1600 "the filament and causes grinding issues."
\r
1603 #: Cura/util/profile.py:199
\r
1604 msgid "Z hop when retracting (mm)"
\r
1605 msgstr "回退时Z轴抬起(mm)"
\r
1607 #: Cura/util/profile.py:199
\r
1609 "When a retraction is done, the head is lifted by this amount to travel over "
\r
1610 "the print. A value of 0.075 works well. This feature has a lot of positive "
\r
1611 "effect on delta towers."
\r
1614 #: Cura/util/profile.py:200
\r
1615 msgid "Initial layer thickness (mm)"
\r
1616 msgstr "初始层厚 (mm)"
\r
1618 #: Cura/util/profile.py:200
\r
1620 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
\r
1621 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
\r
1622 "the other layers."
\r
1624 "底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"
\r
1627 #: Cura/util/profile.py:201
\r
1628 msgid "Initial layer line width (%)"
\r
1631 #: Cura/util/profile.py:201
\r
1633 "Extra width factor for the extrusion on the first layer, on some printers "
\r
1634 "it's good to have wider extrusion on the first layer to get better bed "
\r
1638 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时,可以使用这个参"
\r
1641 #: Cura/util/profile.py:202
\r
1642 msgid "Cut off object bottom (mm)"
\r
1645 #: Cura/util/profile.py:202
\r
1647 "Sinks the object into the platform, this can be used for objects that do not "
\r
1648 "have a flat bottom and thus create a too small first layer."
\r
1651 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时,可以使用这个参"
\r
1654 #: Cura/util/profile.py:204
\r
1655 msgid "Dual extrusion overlap (mm)"
\r
1656 msgstr "两次挤出重叠(mm)"
\r
1658 #: Cura/util/profile.py:204
\r
1660 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
\r
1661 "bonds the different colors together."
\r
1662 msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"
\r
1664 #: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207
\r
1665 #: Cura/util/profile.py:208 Cura/util/profile.py:209
\r
1669 #: Cura/util/profile.py:205
\r
1670 msgid "Travel speed (mm/s)"
\r
1671 msgstr "移动速度 (mm/s)"
\r
1673 #: Cura/util/profile.py:205
\r
1675 "Speed at which travel moves are done, a well built Ultimaker can reach "
\r
1676 "speeds of 250mm/s. But some machines might miss steps then."
\r
1679 "此移动速度指非打印状态下的移动速度\n"
\r
1680 "建议不要超过150mm/s,否则可能造成电机丢步"
\r
1682 #: Cura/util/profile.py:206
\r
1683 msgid "Bottom layer speed (mm/s)"
\r
1684 msgstr "底层速度 (mm/s)"
\r
1686 #: Cura/util/profile.py:206
\r
1688 "Print speed for the bottom layer, you want to print the first layer slower "
\r
1689 "so it sticks better to the printer bed."
\r
1692 "这个值通常会设置的很低,这样能使底层和平台粘附的更好"
\r
1694 #: Cura/util/profile.py:207
\r
1695 msgid "Infill speed (mm/s)"
\r
1696 msgstr "填充速度 (mm/s)"
\r
1698 #: Cura/util/profile.py:207
\r
1700 "Speed at which infill parts are printed. If set to 0 then the print speed is "
\r
1701 "used for the infill. Printing the infill faster can greatly reduce printing "
\r
1702 "time, but this can negatively affect print quality."
\r
1705 "当设置为0时,会使用打印速度作为填充速度。高速打印填充能节省很多打印时间,但是"
\r
1706 "可能会对打印质量照成一定消极影响"
\r
1708 #: Cura/util/profile.py:208
\r
1709 msgid "Outer shell speed (mm/s)"
\r
1710 msgstr "外壳速度 (mm/s)"
\r
1712 #: Cura/util/profile.py:208
\r
1714 "Speed at which outer shell is printed. If set to 0 then the print speed is "
\r
1715 "used. Printing the outer shell at a lower speed improves the final skin "
\r
1716 "quality. However, having a large difference between the inner shell speed "
\r
1717 "and the outer shell speed will effect quality in a negative way."
\r
1720 "当设置为0时,会使用打印速度作为外壳速度\n"
\r
1721 "使用较低的打印速度可以提高模型打印质量,但是如果外壳和内部的打印速度相差较"
\r
1722 "大,可能会对打印质量有一些消极影响"
\r
1724 #: Cura/util/profile.py:209
\r
1725 msgid "Inner shell speed (mm/s)"
\r
1726 msgstr "内壁速度 (mm/s)"
\r
1728 #: Cura/util/profile.py:209
\r
1730 "Speed at which inner shells are printed. If set to 0 then the print speed is "
\r
1731 "used. Printing the inner shell faster then the outer shell will reduce "
\r
1732 "printing time. It is good to set this somewhere in between the outer shell "
\r
1733 "speed and the infill/printing speed."
\r
1736 "当设置为0时,会使用打印速度作为内壁速度\n"
\r
1737 "使用较高的打印机速度可以减少模型的打印时间,需要设置好外壳速度、打印速度、填"
\r
1740 #: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216
\r
1741 #: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219
\r
1742 #: Cura/util/profile.py:220
\r
1746 #: Cura/util/profile.py:210
\r
1747 msgid "Minimal layer time (sec)"
\r
1748 msgstr "每层最小打印时间(sec)"
\r
1750 #: Cura/util/profile.py:210
\r
1752 "Minimum time spent in a layer, gives the layer time to cool down before the "
\r
1753 "next layer is put on top. If the layer will be placed down too fast the "
\r
1754 "printer will slow down to make sure it has spent at least this amount of "
\r
1755 "seconds printing this layer."
\r
1758 "在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完,那么打印机会"
\r
1759 "适当降低速度,以保证有这个设定时间"
\r
1761 #: Cura/util/profile.py:211
\r
1762 msgid "Enable cooling fan"
\r
1765 #: Cura/util/profile.py:211
\r
1767 "Enable the cooling fan during the print. The extra cooling from the cooling "
\r
1768 "fan is essential during faster prints."
\r
1771 "在快速打印时开启风扇冷却是很有必要的"
\r
1773 #: Cura/util/profile.py:213
\r
1774 msgid "Line count"
\r
1777 #: Cura/util/profile.py:213
\r
1779 "The skirt is a line drawn around the object at the first layer. This helps "
\r
1780 "to prime your extruder, and to see if the object fits on your platform.\n"
\r
1781 "Setting this to 0 will disable the skirt. Multiple skirt lines can help "
\r
1782 "priming your extruder better for small objects."
\r
1785 #: Cura/util/profile.py:214
\r
1786 msgid "Start distance (mm)"
\r
1789 #: Cura/util/profile.py:214
\r
1791 "The distance between the skirt and the first layer.\n"
\r
1792 "This is the minimal distance, multiple skirt lines will be put outwards from "
\r
1796 #: Cura/util/profile.py:215
\r
1797 msgid "Minimal length (mm)"
\r
1800 #: Cura/util/profile.py:215
\r
1802 "The minimal length of the skirt, if this minimal length is not reached it "
\r
1803 "will add more skirt lines to reach this minimal lenght.\n"
\r
1804 "Note: If the line count is set to 0 this is ignored."
\r
1807 #: Cura/util/profile.py:216
\r
1808 msgid "Fan full on at height (mm)"
\r
1809 msgstr "风扇全速开启高度(mm)"
\r
1811 #: Cura/util/profile.py:216
\r
1813 "The height at which the fan is turned on completely. For the layers below "
\r
1814 "this the fan speed is scaled linearly with the fan off at layer 0."
\r
1817 #: Cura/util/profile.py:217
\r
1818 msgid "Fan speed min (%)"
\r
1819 msgstr "风扇最小速度(%)"
\r
1821 #: Cura/util/profile.py:217
\r
1823 "When the fan is turned on, it is enabled at this speed setting. If cool "
\r
1824 "slows down the layer, the fan is adjusted between the min and max speed. "
\r
1825 "Minimal fan speed is used if the layer is not slowed down due to cooling."
\r
1828 #: Cura/util/profile.py:218
\r
1829 msgid "Fan speed max (%)"
\r
1830 msgstr "风扇最大速度(%)"
\r
1832 #: Cura/util/profile.py:218
\r
1834 "When the fan is turned on, it is enabled at this speed setting. If cool "
\r
1835 "slows down the layer, the fan is adjusted between the min and max speed. "
\r
1836 "Maximal fan speed is used if the layer is slowed down due to cooling by more "
\r
1840 #: Cura/util/profile.py:219
\r
1841 msgid "Minimum speed (mm/s)"
\r
1842 msgstr "最小速度 (mm/s)"
\r
1844 #: Cura/util/profile.py:219
\r
1846 "The minimal layer time can cause the print to slow down so much it starts to "
\r
1847 "ooze. The minimal feedrate protects against this. Even if a print gets "
\r
1848 "slowed down it will never be slower than this minimal speed."
\r
1851 #: Cura/util/profile.py:220
\r
1852 msgid "Cool head lift"
\r
1855 #: Cura/util/profile.py:220
\r
1857 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "
\r
1858 "the extra time so the minimal layer time is always hit."
\r
1861 #: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
\r
1865 #: Cura/util/profile.py:221
\r
1866 msgid "Solid infill top"
\r
1869 #: Cura/util/profile.py:221
\r
1871 "Create a solid top surface, if set to false the top is filled with the fill "
\r
1872 "percentage. Useful for cups/vases."
\r
1875 #: Cura/util/profile.py:222
\r
1876 msgid "Solid infill bottom"
\r
1879 #: Cura/util/profile.py:222
\r
1881 "Create a solid bottom surface, if set to false the bottom is filled with the "
\r
1882 "fill percentage. Useful for buildings."
\r
1885 #: Cura/util/profile.py:223
\r
1886 msgid "Infill overlap (%)"
\r
1889 #: Cura/util/profile.py:223
\r
1891 "Amount of overlap between the infill and the walls. There is a slight "
\r
1892 "overlap with the walls and the infill so the walls connect firmly to the "
\r
1896 #: Cura/util/profile.py:224
\r
1897 msgid "Structure type"
\r
1900 #: Cura/util/profile.py:224
\r
1902 "The type of support structure.\n"
\r
1903 "Grid is very strong and can come off in 1 piece, however, sometimes it is "
\r
1905 "Lines are single walled lines that break off one at a time. Which is more "
\r
1906 "work to remove, but as it is less strong it does work better on tricky "
\r
1910 #: Cura/util/profile.py:225
\r
1911 msgid "Overhang angle for support (deg)"
\r
1912 msgstr "支撑临界角(deg)"
\r
1914 #: Cura/util/profile.py:225
\r
1916 "The minimal angle that overhangs need to have to get support. With 0 degree "
\r
1917 "being horizontal and 90 degree being vertical."
\r
1920 #: Cura/util/profile.py:226
\r
1921 msgid "Fill amount (%)"
\r
1924 #: Cura/util/profile.py:226
\r
1927 "Amount of infill structure in the support material, less material gives "
\r
1928 "weaker support which is easier to remove. 15% seems to be a good average."
\r
1931 #: Cura/util/profile.py:227
\r
1932 msgid "Distance X/Y (mm)"
\r
1935 #: Cura/util/profile.py:227
\r
1937 "Distance of the support material from the print, in the X/Y directions.\n"
\r
1938 "0.7mm gives a nice distance from the print so the support does not stick to "
\r
1942 #: Cura/util/profile.py:228
\r
1943 msgid "Distance Z (mm)"
\r
1946 #: Cura/util/profile.py:228
\r
1948 "Distance from the top/bottom of the support to the print. A small gap here "
\r
1949 "makes it easier to remove the support but makes the print a bit uglier.\n"
\r
1950 "0.15mm gives a good seperation of the support material."
\r
1953 #: Cura/util/profile.py:229
\r
1954 msgid "Spiralize the outer contour"
\r
1957 #: Cura/util/profile.py:229
\r
1959 "Spiralize is smoothing out the Z move of the outer edge. This will create a "
\r
1960 "steady Z increase over the whole print. This feature turns a solid object "
\r
1961 "into a single walled print with a solid bottom.\n"
\r
1962 "This feature used to be called Joris in older versions."
\r
1965 "打印出个表面非常光滑,但会丢失内部填充"
\r
1967 #: Cura/util/profile.py:230
\r
1968 msgid "Only follow mesh surface"
\r
1971 #: Cura/util/profile.py:230
\r
1973 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "
\r
1974 "infill, no top/bottom, nothing."
\r
1975 msgstr "开启后仅打印表面,顶、底、内部填充都会丢失"
\r
1977 #: Cura/util/profile.py:232
\r
1978 msgid "Brim line amount"
\r
1981 #: Cura/util/profile.py:232
\r
1983 "The amount of lines used for a brim, more lines means a larger brim which "
\r
1984 "sticks better, but this also makes your effective print area smaller."
\r
1987 #: Cura/util/profile.py:233
\r
1988 msgid "Extra margin (mm)"
\r
1991 #: Cura/util/profile.py:233
\r
1993 "If the raft is enabled, this is the extra raft area around the object which "
\r
1994 "is also rafted. Increasing this margin will create a stronger raft while "
\r
1995 "using more material and leaving less area for your print."
\r
1998 #: Cura/util/profile.py:234
\r
1999 msgid "Line spacing (mm)"
\r
2002 #: Cura/util/profile.py:234
\r
2004 "When you are using the raft this is the distance between the centerlines of "
\r
2008 #: Cura/util/profile.py:235
\r
2009 msgid "Base thickness (mm)"
\r
2010 msgstr "基底层厚度(mm)"
\r
2012 #: Cura/util/profile.py:235
\r
2014 "When you are using the raft this is the thickness of the base layer which is "
\r
2018 #: Cura/util/profile.py:236
\r
2019 msgid "Base line width (mm)"
\r
2020 msgstr "基底层走线宽度(mm)"
\r
2022 #: Cura/util/profile.py:236
\r
2024 "When you are using the raft this is the width of the base layer lines which "
\r
2028 #: Cura/util/profile.py:237
\r
2029 msgid "Interface thickness (mm)"
\r
2030 msgstr "接触层厚度(mm)"
\r
2032 #: Cura/util/profile.py:237
\r
2034 "When you are using the raft this is the thickness of the interface layer "
\r
2035 "which is put down."
\r
2038 #: Cura/util/profile.py:238
\r
2039 msgid "Interface line width (mm)"
\r
2040 msgstr "接触层走线宽度 (mm)"
\r
2042 #: Cura/util/profile.py:238
\r
2044 "When you are using the raft this is the width of the interface layer lines "
\r
2045 "which are put down."
\r
2048 #: Cura/util/profile.py:239
\r
2052 #: Cura/util/profile.py:239
\r
2054 "Gap between the last layer of the raft and the first printing layer. A small "
\r
2055 "gap of 0.2mm works wonders on PLA and makes the raft easy to remove."
\r
2058 "这个间隙能让模型更容易取下,使用PLA建议设为0.2mm"
\r
2060 #: Cura/util/profile.py:240
\r
2061 msgid "Surface layers"
\r
2064 #: Cura/util/profile.py:240
\r
2066 "Amount of surface layers put on top of the raft, these are fully filled "
\r
2067 "layers on which the model is printed."
\r
2070 #: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243
\r
2071 #: Cura/util/profile.py:244
\r
2072 msgid "Fix horrible"
\r
2075 #: Cura/util/profile.py:241
\r
2076 msgid "Combine everything (Type-A)"
\r
2077 msgstr "闭合面片(Type-A)"
\r
2079 #: Cura/util/profile.py:241 Cura/util/profile.py:242
\r
2081 "This expert option adds all parts of the model together. The result is "
\r
2082 "usually that internal cavities disappear. Depending on the model this can be "
\r
2083 "intended or not. Enabling this option is at your own risk. Type-A is "
\r
2084 "dependent on the model normals and tries to keep some internal holes intact. "
\r
2085 "Type-B ignores all internal holes and only keeps the outside shape per layer."
\r
2088 #: Cura/util/profile.py:242
\r
2089 msgid "Combine everything (Type-B)"
\r
2090 msgstr "闭合面片(Type-B)"
\r
2092 #: Cura/util/profile.py:243
\r
2093 msgid "Keep open faces"
\r
2096 #: Cura/util/profile.py:243
\r
2098 "This expert option keeps all the open bits of the model intact. Normally "
\r
2099 "Cura tries to stitch up small holes and remove everything with big holes, "
\r
2100 "but this option keeps bits that are not properly part of anything and just "
\r
2101 "goes with whatever is left. This option is usually not what you want, but it "
\r
2102 "might enable you to slice models otherwise failing to produce proper paths.\n"
\r
2103 "As with all \"Fix horrible\" options, results may vary and use at your own "
\r
2107 #: Cura/util/profile.py:244
\r
2108 msgid "Extensive stitching"
\r
2111 #: Cura/util/profile.py:244
\r
2113 "Extensive stitching tries to fix up open holes in the model by closing the "
\r
2114 "hole with touching polygons. This algorthm is quite expensive and could "
\r
2115 "introduce a lot of processing time.\n"
\r
2116 "As with all \"Fix horrible\" options, results may vary and use at your own "
\r
2120 #: Cura/util/profile.py:470
\r
2121 msgid "Save profile on slice"
\r
2124 #: Cura/util/profile.py:470
\r
2126 "When slicing save the profile as [stl_file]_profile.ini next to the model."
\r
2129 #: Cura/util/profile.py:471
\r
2130 msgid "Cost (price/kg)"
\r
2133 #: Cura/util/profile.py:471
\r
2134 msgid "Cost of your filament per kg, to estimate the cost of the final print."
\r
2137 #: Cura/util/profile.py:472
\r
2138 msgid "Cost (price/m)"
\r
2141 #: Cura/util/profile.py:472
\r
2143 "Cost of your filament per meter, to estimate the cost of the final print."
\r
2146 #: Cura/util/profile.py:473
\r
2147 msgid "Auto detect SD card drive"
\r
2150 #: Cura/util/profile.py:473
\r
2152 "Auto detect the SD card. You can disable this because on some systems "
\r
2153 "external hard-drives or USB sticks are detected as SD card."
\r
2156 #: Cura/util/profile.py:474
\r
2157 msgid "Check for updates"
\r
2160 #: Cura/util/profile.py:474
\r
2161 msgid "Check for newer versions of Cura on startup"
\r
2164 #: Cura/util/profile.py:475
\r
2165 msgid "Send usage statistics"
\r
2168 #: Cura/util/profile.py:475
\r
2169 msgid "Submit anonymous usage information to improve future versions of Cura"
\r
2172 #: Cura/util/profile.py:477
\r
2173 msgid "Density (kg/m3)"
\r
2176 #: Cura/util/profile.py:477
\r
2178 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
\r
2179 "This value is used to estimate the weight if the filament used for the print."
\r
2182 #: Cura/util/profile.py:478
\r
2184 "Change the language in which Cura runs. Switching language requires a "
\r
2188 #: Cura/util/profile.py:481
\r
2189 msgid "Model colour"
\r
2192 #: Cura/util/profile.py:481
\r
2193 msgid "Display color for first extruder"
\r
2196 #: Cura/util/profile.py:482
\r
2197 msgid "Model colour (2)"
\r
2200 #: Cura/util/profile.py:482
\r
2201 msgid "Display color for second extruder"
\r
2204 #: Cura/util/profile.py:483
\r
2205 msgid "Model colour (3)"
\r
2208 #: Cura/util/profile.py:483
\r
2209 msgid "Display color for third extruder"
\r
2212 #: Cura/util/profile.py:484
\r
2213 msgid "Model colour (4)"
\r
2216 #: Cura/util/profile.py:484
\r
2217 msgid "Display color for forth extruder"
\r
2220 #: Cura/util/profile.py:485
\r
2221 msgid "Printing window type"
\r
2224 #: Cura/util/profile.py:485
\r
2225 msgid "Select the interface used for USB printing."
\r
2228 #: Cura/util/profile.py:497
\r
2229 msgid "Maximum width (mm)"
\r
2230 msgstr "最大宽度 (mm)"
\r
2232 #: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499
\r
2233 msgid "Size of the machine in mm"
\r
2236 #: Cura/util/profile.py:498
\r
2237 msgid "Maximum depth (mm)"
\r
2240 #: Cura/util/profile.py:499
\r
2241 msgid "Maximum height (mm)"
\r
2244 #: Cura/util/profile.py:500
\r
2245 msgid "Machine center 0,0"
\r
2248 #: Cura/util/profile.py:500
\r
2250 "Machines firmware defines the center of the bed as 0,0 instead of the front "
\r
2254 #: Cura/util/profile.py:501
\r
2255 msgid "Build area shape"
\r
2258 #: Cura/util/profile.py:501
\r
2259 msgid "The shape of machine build area."
\r
2262 #: Cura/util/profile.py:503
\r
2264 "If you have an heated bed, this enabled heated bed settings (requires "
\r
2268 #: Cura/util/profile.py:504
\r
2269 msgid "GCode Flavor"
\r
2272 #: Cura/util/profile.py:504
\r
2274 "Flavor of generated GCode.\n"
\r
2275 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
\r
2276 "UltiGCode is a variation of the RepRap GCode which puts more settings in the "
\r
2277 "machine instead of the slicer.\n"
\r
2278 "MakerBot GCode has a few changes in the way GCode is generated, but still "
\r
2279 "requires MakerWare to generate to X3G.\n"
\r
2280 "BFB style generates RPM based code.\n"
\r
2281 "Mach3 uses A,B,C instead of E for extruders."
\r
2284 #: Cura/util/profile.py:505
\r
2285 msgid "Extruder count"
\r
2288 #: Cura/util/profile.py:505
\r
2289 msgid "Amount of extruders in your machine."
\r
2292 #: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510
\r
2296 #: Cura/util/profile.py:506 Cura/util/profile.py:507
\r
2297 msgid "The offset of your secondary extruder compared to the primary."
\r
2300 #: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511
\r
2304 #: Cura/util/profile.py:508 Cura/util/profile.py:509
\r
2305 msgid "The offset of your tertiary extruder compared to the primary."
\r
2308 #: Cura/util/profile.py:510 Cura/util/profile.py:511
\r
2309 msgid "The offset of your forth extruder compared to the primary."
\r
2312 #: Cura/util/profile.py:512
\r
2313 msgid "E-Steps per 1mm filament"
\r
2316 #: Cura/util/profile.py:512
\r
2318 "Amount of steps per mm filament extrusion. If set to 0 then this value is "
\r
2319 "ignored and the value in your firmware is used."
\r
2322 #: Cura/util/profile.py:513
\r
2323 msgid "Serial port"
\r
2326 #: Cura/util/profile.py:513
\r
2327 msgid "Serial port to use for communication with the printer"
\r
2330 #: Cura/util/profile.py:515
\r
2334 #: Cura/util/profile.py:515
\r
2336 "Speed of the serial port communication\n"
\r
2337 "Needs to match your firmware settings\n"
\r
2338 "Common values are 250000, 115200, 57600"
\r
2341 #: Cura/util/profile.py:518
\r
2342 msgid "Head size towards X min (mm)"
\r
2345 #: Cura/util/profile.py:518
\r
2347 "The head size when printing multiple objects, measured from the tip of the "
\r
2348 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
\r
2349 "is on the left side."
\r
2352 #: Cura/util/profile.py:519
\r
2353 msgid "Head size towards Y min (mm)"
\r
2356 #: Cura/util/profile.py:519 Cura/util/profile.py:520
\r
2358 "The head size when printing multiple objects, measured from the tip of the "
\r
2359 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
\r
2360 "is on the left side."
\r
2363 #: Cura/util/profile.py:520
\r
2364 msgid "Head size towards X max (mm)"
\r
2367 #: Cura/util/profile.py:521
\r
2368 msgid "Head size towards Y max (mm)"
\r
2371 #: Cura/util/profile.py:521
\r
2373 "The head size when printing multiple objects, measured from the tip of the "
\r
2374 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
\r
2375 "is on the left side."
\r
2378 #: Cura/util/profile.py:522
\r
2379 msgid "Printer gantry height (mm)"
\r
2382 #: Cura/util/profile.py:522
\r
2384 "The height of the gantry holding up the printer head. If an object is higher "
\r
2385 "then this then you cannot print multiple objects one for one. 60mm for an "
\r
2389 #: Cura/util/profile.py:524
\r
2391 msgid "More flow than 150% is rare and usually not recommended."
\r
2394 #: Cura/util/profile.py:525
\r
2396 msgid "Less flow than 50% is rare and usually not recommended."
\r
2399 #: Cura/util/profile.py:526
\r
2402 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
\r
2403 "are not recommended."
\r
2406 #: Cura/util/profile.py:528
\r
2408 "It is highly unlikely that your machine can achieve a printing speed above "
\r
2412 #: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532
\r
2413 #: Cura/util/profile.py:533
\r
2414 msgid "Temperatures above 260C could damage your machine, be careful!"
\r
2417 #: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536
\r
2418 #: Cura/util/profile.py:537
\r
2420 "Are you sure your filament is that thick? Normal filament is around 3mm or "
\r
2424 #: Cura/util/profile.py:538
\r
2426 "It is highly unlikely that your machine can achieve a travel speed above "
\r
2430 #: Cura/util/profile.py:539
\r
2433 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
\r
2434 "results and is not recommended."
\r