1 # SOME DESCRIPTIVE TITLE.
\r
3 # This file is distributed under the same license as the Cura package.
\r
4 # Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
\r
8 "Project-Id-Version: Cura\n"
\r
9 "Report-Msgid-Bugs-To: \n"
\r
10 "POT-Creation-Date: 2014-10-22 10:17+0200\n"
\r
11 "PO-Revision-Date: 2014-09-29 16:02+0800\n"
\r
12 "Last-Translator: \n"
\r
13 "Language-Team: coloz <clz@clz.me>\n"
\r
14 "MIME-Version: 1.0\n"
\r
15 "Content-Type: text/plain; charset=UTF-8\n"
\r
16 "Content-Transfer-Encoding: 8bit\n"
\r
17 "X-Generator: Poedit 1.6.8\n"
\r
18 "Language: zh_Hans_CN\n"
\r
19 "Plural-Forms: nplurals=1; plural=0;\n"
\r
21 #: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610
\r
22 msgid "A new version of Cura is available, would you like to download?"
\r
25 #: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610
\r
26 msgid "New version available"
\r
29 #: Cura/gui/configWizard.py:231
\r
30 msgid "Add new machine wizard"
\r
33 #: Cura/gui/configWizard.py:233
\r
34 msgid "First time run wizard"
\r
37 #: Cura/gui/configWizard.py:234
\r
38 msgid "Welcome, and thanks for trying Cura!"
\r
41 #: Cura/gui/configWizard.py:236
\r
42 msgid "This wizard will help you in setting up Cura for your machine."
\r
43 msgstr "向导将协助你,为你的机型配置Cura"
\r
45 #: Cura/gui/configWizard.py:239
\r
47 msgid "Select your language:"
\r
50 #: Cura/gui/configWizard.py:279
\r
51 msgid "Printrbot Selection"
\r
54 #: Cura/gui/configWizard.py:280
\r
55 msgid "Select which Printrbot machine you have:"
\r
58 #: Cura/gui/configWizard.py:316
\r
59 msgid "Other machine information"
\r
62 #: Cura/gui/configWizard.py:317
\r
63 msgid "The following pre-defined machine profiles are available"
\r
66 #: Cura/gui/configWizard.py:318
\r
68 "Note that these profiles are not guaranteed to give good results,\n"
\r
69 "or work at all. Extra tweaks might be required.\n"
\r
70 "If you find issues with the predefined profiles,\n"
\r
71 "or want an extra profile.\n"
\r
72 "Please report it at the github issue tracker."
\r
75 #: Cura/gui/configWizard.py:329
\r
79 #: Cura/gui/configWizard.py:347
\r
83 #: Cura/gui/configWizard.py:348
\r
84 msgid "Cura is now ready to be used!"
\r
87 #: Cura/gui/configWizard.py:352
\r
88 msgid "Custom RepRap information"
\r
91 #: Cura/gui/configWizard.py:353
\r
93 "RepRap machines can be vastly different, so here you can set your own "
\r
97 #: Cura/gui/configWizard.py:354
\r
99 "Be sure to review the default profile before running it on your machine."
\r
102 #: Cura/gui/configWizard.py:355
\r
104 "If you like a default profile for your machine added,\n"
\r
105 "then make an issue on github."
\r
108 #: Cura/gui/configWizard.py:357
\r
109 msgid "You will have to manually install Marlin or Sprinter firmware."
\r
112 #: Cura/gui/configWizard.py:359
\r
113 msgid "Machine name"
\r
116 #: Cura/gui/configWizard.py:360
\r
117 msgid "Machine width (mm)"
\r
120 #: Cura/gui/configWizard.py:361
\r
121 msgid "Machine depth (mm)"
\r
124 #: Cura/gui/configWizard.py:362
\r
125 msgid "Machine height (mm)"
\r
128 #: Cura/gui/configWizard.py:363 Cura/util/profile.py:175
\r
129 msgid "Nozzle size (mm)"
\r
132 #: Cura/gui/configWizard.py:364 Cura/util/profile.py:503
\r
136 #: Cura/gui/configWizard.py:365
\r
137 msgid "Bed center is 0,0,0 (RoStock)"
\r
138 msgstr "平台中心为0,0,0"
\r
140 #: Cura/gui/configWizard.py:385
\r
141 msgid "Select your machine"
\r
144 #: Cura/gui/configWizard.py:386
\r
145 msgid "What kind of machine do you have:"
\r
148 #: Cura/gui/configWizard.py:401
\r
150 msgid "Other (Ex: RepRap, MakerBot, Witbox)"
\r
151 msgstr "其他机型(如MostFun Sail)"
\r
153 #: Cura/gui/configWizard.py:404
\r
155 "The collection of anonymous usage information helps with the continued "
\r
156 "improvement of Cura."
\r
159 #: Cura/gui/configWizard.py:405
\r
161 "This does NOT submit your models online nor gathers any privacy related "
\r
165 #: Cura/gui/configWizard.py:406
\r
166 msgid "Submit anonymous usage information:"
\r
169 #: Cura/gui/configWizard.py:407
\r
170 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
\r
173 #: Cura/gui/configWizard.py:524
\r
174 msgid "Select upgraded parts you have"
\r
177 #: Cura/gui/configWizard.py:525
\r
179 "To assist you in having better default settings for your Ultimaker\n"
\r
180 "Cura would like to know which upgrades you have in your machine."
\r
183 #: Cura/gui/configWizard.py:527
\r
184 msgid "Extruder drive upgrade"
\r
187 #: Cura/gui/configWizard.py:528
\r
188 msgid "Heated printer bed (kit)"
\r
191 #: Cura/gui/configWizard.py:529
\r
192 msgid "Heated printer bed (self built)"
\r
195 #: Cura/gui/configWizard.py:530
\r
196 msgid "Dual extrusion (experimental)"
\r
199 #: Cura/gui/configWizard.py:532
\r
201 "If you have an Ultimaker bought after october 2012 you will have the\n"
\r
202 "Extruder drive upgrade. If you do not have this upgrade,\n"
\r
203 "it is highly recommended to improve reliability."
\r
206 #: Cura/gui/configWizard.py:533
\r
208 "This upgrade can be bought from the Ultimaker webshop\n"
\r
209 "or found on thingiverse as thing:26094"
\r
212 #: Cura/gui/configWizard.py:555
\r
213 msgid "Upgrade Ultimaker Firmware"
\r
216 #: Cura/gui/configWizard.py:556
\r
218 "Firmware is the piece of software running directly on your 3D printer.\n"
\r
219 "This firmware controls the step motors, regulates the temperature\n"
\r
220 "and ultimately makes your printer work."
\r
223 #: Cura/gui/configWizard.py:558
\r
225 "The firmware shipping with new Ultimakers works, but upgrades\n"
\r
226 "have been made to make better prints, and make calibration easier."
\r
229 #: Cura/gui/configWizard.py:560
\r
231 "Cura requires these new features and thus\n"
\r
232 "your firmware will most likely need to be upgraded.\n"
\r
233 "You will get the chance to do so now."
\r
236 #: Cura/gui/configWizard.py:566
\r
237 msgid "Do not upgrade to this firmware if:"
\r
240 #: Cura/gui/configWizard.py:567
\r
241 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
\r
244 #: Cura/gui/configWizard.py:568
\r
245 msgid "* Build your own heated bed"
\r
248 #: Cura/gui/configWizard.py:569
\r
249 msgid "* Have other changes in the firmware"
\r
252 #: Cura/gui/configWizard.py:589
\r
253 msgid "Ultimaker Checkup"
\r
256 #: Cura/gui/configWizard.py:603
\r
258 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"
\r
259 "You can skip these if you know your machine is functional."
\r
262 #: Cura/gui/configWizard.py:604
\r
266 #: Cura/gui/configWizard.py:604
\r
267 msgid "Skip checks"
\r
270 #: Cura/gui/configWizard.py:608
\r
271 msgid "Communication:"
\r
274 #: Cura/gui/configWizard.py:609
\r
275 msgid "Temperature:"
\r
278 #: Cura/gui/configWizard.py:610
\r
282 #: Cura/gui/configWizard.py:615
\r
283 msgid "Show error log"
\r
286 #: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078
\r
287 #: Cura/gui/configWizard.py:1297
\r
288 msgid "Connecting to machine."
\r
291 #: Cura/gui/configWizard.py:670
\r
292 msgid "Cooldown before temperature check."
\r
295 #: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683
\r
296 msgid "Checking the heater and temperature sensor."
\r
299 #: Cura/gui/configWizard.py:694
\r
300 msgid "Please make sure none of the endstops are pressed."
\r
303 #: Cura/gui/configWizard.py:707
\r
304 msgid "Temperature measurement FAILED!"
\r
307 #: Cura/gui/configWizard.py:712
\r
309 msgid "Head temperature: %d"
\r
312 #: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728
\r
314 msgid "Communication State: %s"
\r
317 #: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255
\r
318 #: Cura/gui/configWizard.py:1473
\r
319 msgid "Failed to establish connection with the printer."
\r
322 #: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777
\r
323 msgid "Please press the left X endstop."
\r
326 #: Cura/gui/configWizard.py:772
\r
327 msgid "Please press the right X endstop."
\r
330 #: Cura/gui/configWizard.py:782
\r
331 msgid "Please press the front Y endstop."
\r
334 #: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797
\r
335 msgid "Please press the top Z endstop."
\r
338 #: Cura/gui/configWizard.py:792
\r
339 msgid "Please press the back Y endstop."
\r
342 #: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817
\r
343 msgid "Checkup finished"
\r
346 #: Cura/gui/configWizard.py:811
\r
347 msgid "Please press the bottom Z endstop."
\r
350 #: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855
\r
351 msgid "Ultimaker Calibration"
\r
354 #: Cura/gui/configWizard.py:860
\r
355 msgid "Calibrating the Steps Per E requires some manual actions."
\r
358 #: Cura/gui/configWizard.py:861
\r
359 msgid "First remove any filament from your machine."
\r
362 #: Cura/gui/configWizard.py:862
\r
364 "Next put in your filament so the tip is aligned with the\n"
\r
365 "top of the extruder drive."
\r
368 #: Cura/gui/configWizard.py:863
\r
369 msgid "We'll push the filament 100mm"
\r
372 #: Cura/gui/configWizard.py:864
\r
373 msgid "Extrude 100mm filament"
\r
376 #: Cura/gui/configWizard.py:865
\r
378 "Now measure the amount of extruded filament:\n"
\r
379 "(this can be more or less then 100mm)"
\r
382 #: Cura/gui/configWizard.py:866
\r
386 #: Cura/gui/configWizard.py:867
\r
387 msgid "This results in the following steps per E:"
\r
390 #: Cura/gui/configWizard.py:869
\r
391 msgid "You can repeat these steps to get better calibration."
\r
394 #: Cura/gui/configWizard.py:872
\r
396 "If you still have filament in your printer which needs\n"
\r
397 "heat to remove, press the heat up button below:"
\r
400 #: Cura/gui/configWizard.py:873
\r
401 msgid "Heatup for filament removal"
\r
404 #: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932
\r
406 "Error: Failed to open serial port to machine\n"
\r
407 "If this keeps happening, try disconnecting and reconnecting the USB cable"
\r
410 #: Cura/gui/configWizard.py:972
\r
414 #: Cura/gui/configWizard.py:973
\r
415 msgid "Congratulations on your the purchase of your brand new Ultimaker2."
\r
418 #: Cura/gui/configWizard.py:974
\r
419 msgid "Cura is now ready to be used with your Ultimaker2."
\r
422 #: Cura/gui/configWizard.py:979
\r
423 msgid "Lulzbot TAZ/Mini"
\r
426 #: Cura/gui/configWizard.py:980
\r
427 msgid "Cura is now ready to be used with your Lulzbot."
\r
430 #: Cura/gui/configWizard.py:985
\r
431 msgid "Configuration Wizard"
\r
434 #: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486
\r
436 msgid "Bed leveling wizard"
\r
437 msgstr "运行平台调平向导..."
\r
439 #: Cura/gui/configWizard.py:1040
\r
441 msgid "This wizard will help you in leveling your printer bed"
\r
442 msgstr "向导将协助你,为你的机型配置Cura"
\r
444 #: Cura/gui/configWizard.py:1042
\r
445 msgid "It will do the following steps"
\r
448 #: Cura/gui/configWizard.py:1043
\r
449 msgid "* Move the printer head to each corner"
\r
452 #: Cura/gui/configWizard.py:1044
\r
453 msgid " and let you adjust the height of the bed to the nozzle"
\r
456 #: Cura/gui/configWizard.py:1045
\r
457 msgid "* Print a line around the bed to check if it is level"
\r
460 #: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273
\r
462 msgid "Connect to printer"
\r
465 #: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279
\r
470 #: Cura/gui/configWizard.py:1053
\r
474 #: Cura/gui/configWizard.py:1053
\r
478 #: Cura/gui/configWizard.py:1054
\r
482 #: Cura/gui/configWizard.py:1054
\r
486 #: Cura/gui/configWizard.py:1114
\r
487 msgid "Homing printer..."
\r
490 #: Cura/gui/configWizard.py:1124
\r
491 msgid "Moving head to back center..."
\r
494 #: Cura/gui/configWizard.py:1131
\r
495 msgid "Moving head to back left corner..."
\r
498 #: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153
\r
499 msgid "Moving head to front right corner..."
\r
502 #: Cura/gui/configWizard.py:1146
\r
503 msgid "Moving head to back right corner..."
\r
506 #: Cura/gui/configWizard.py:1160
\r
507 msgid "Heating up printer..."
\r
510 #: Cura/gui/configWizard.py:1167
\r
511 msgid "Printing a square on the printer bed at 0.3mm height."
\r
514 #: Cura/gui/configWizard.py:1207
\r
516 "Adjust the front left screw of your printer bed\n"
\r
517 "So the nozzle just hits the bed."
\r
520 #: Cura/gui/configWizard.py:1212
\r
522 "Adjust the back screw of your printer bed\n"
\r
523 "So the nozzle just hits the bed."
\r
526 #: Cura/gui/configWizard.py:1214
\r
528 "Adjust the back left screw of your printer bed\n"
\r
529 "So the nozzle just hits the bed."
\r
532 #: Cura/gui/configWizard.py:1218
\r
534 "Adjust the back right screw of your printer bed\n"
\r
535 "So the nozzle just hits the bed."
\r
538 #: Cura/gui/configWizard.py:1222
\r
540 "Adjust the front right screw of your printer bed\n"
\r
541 "So the nozzle just hits the bed."
\r
544 #: Cura/gui/configWizard.py:1226
\r
546 msgid "Heating up printer: %d/%d"
\r
549 #: Cura/gui/configWizard.py:1228
\r
551 "The printer is hot now. Please insert some PLA filament into the printer."
\r
554 #: Cura/gui/configWizard.py:1237
\r
555 msgid "Use the up/down buttons to move the bed and adjust your Z endstop."
\r
558 #: Cura/gui/configWizard.py:1249
\r
560 "Calibration finished.\n"
\r
561 "The squares on the bed should slightly touch each other."
\r
564 #: Cura/gui/configWizard.py:1270
\r
567 "This wizard will help you in calibrating the printer head offsets of your "
\r
568 "dual extrusion machine"
\r
569 msgstr "向导将协助你,为你的机型配置Cura"
\r
571 #: Cura/gui/configWizard.py:1303
\r
572 msgid "Printing initial calibration cross"
\r
575 #: Cura/gui/configWizard.py:1351
\r
577 "Please measure the distance between the horizontal lines in millimeters."
\r
580 #: Cura/gui/configWizard.py:1361
\r
581 msgid "Printing the fine calibration lines."
\r
584 #: Cura/gui/configWizard.py:1416
\r
586 "Which horizontal line number lays perfect on top of each other? Front most "
\r
590 #: Cura/gui/configWizard.py:1427
\r
592 msgid "Calibration finished. Offsets are: %s %s"
\r
595 #: Cura/gui/configWizard.py:1440
\r
596 msgid "Please load both extruders with PLA."
\r
599 #: Cura/gui/configWizard.py:1449
\r
600 msgid "Homing printer and heating up both extruders."
\r
603 #: Cura/gui/configWizard.py:1459
\r
604 msgid "Please measure the distance between the vertical lines in millimeters."
\r
607 #: Cura/gui/configWizard.py:1466
\r
609 "Which vertical line number lays perfect on top of each other? Leftmost line "
\r
613 #: Cura/gui/configWizard.py:1515
\r
615 msgid "Head offset wizard"
\r
616 msgstr "运行多喷头校正向导..."
\r
618 #: Cura/gui/expertConfig.py:25
\r
620 msgid "Expert config"
\r
623 #: Cura/gui/firmwareInstall.py:59
\r
625 "I am sorry, but Cura does not ship with a default firmware for your machine "
\r
629 #: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64
\r
630 #: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:541
\r
631 msgid "Firmware update"
\r
634 #: Cura/gui/firmwareInstall.py:64
\r
636 "Cura only supports firmware updates for ATMega2560 based hardware.\n"
\r
637 "So updating your RepRap with Cura might or might not work."
\r
639 "Cura仅支持基于ATmega2560的机型升级\n"
\r
640 "升级固件后也许大概有可能你的打印机无法正常工作"
\r
642 #: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175
\r
646 #: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206
\r
647 msgid "Reading firmware..."
\r
650 #: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208
\r
651 msgid "Connecting to machine..."
\r
654 #: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212
\r
656 "Please connect the printer to\n"
\r
657 "your computer with the USB cable."
\r
660 #: Cura/gui/firmwareInstall.py:118
\r
662 "Failed to find machine for firmware upgrade\n"
\r
663 "Is your machine connected to the PC?"
\r
666 #: Cura/gui/firmwareInstall.py:125
\r
668 "Failed to install firmware:\n"
\r
669 "This firmware is not compatible with this machine.\n"
\r
670 "Trying to install UMO firmware on an UM2 or UMO+?"
\r
673 #: Cura/gui/firmwareInstall.py:131
\r
675 "Failed to install firmware:\n"
\r
676 "This firmware is not compatible with this machine.\n"
\r
677 "Trying to install UM2 or UMO+ firmware on an UMO?"
\r
680 #: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234
\r
681 msgid "Uploading firmware..."
\r
684 #: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237
\r
688 "Installed firmware: %s"
\r
693 #: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239
\r
694 msgid "Failed to write firmware.\n"
\r
697 #: Cura/gui/firmwareInstall.py:231
\r
698 msgid "Failed to connect to programmer.\n"
\r
701 #: Cura/gui/mainWindow.py:68
\r
702 msgid "Load model file...\tCTRL+L"
\r
703 msgstr "读取模型文件...\tCTRL+L"
\r
705 #: Cura/gui/mainWindow.py:70
\r
706 msgid "Save model...\tCTRL+S"
\r
707 msgstr "保存模型...\tCTRL+S"
\r
709 #: Cura/gui/mainWindow.py:72
\r
710 msgid "Reload platform\tF5"
\r
711 msgstr "重新载入模型\tF5"
\r
713 #: Cura/gui/mainWindow.py:74
\r
714 msgid "Clear platform"
\r
717 #: Cura/gui/mainWindow.py:78
\r
718 msgid "Print...\tCTRL+P"
\r
719 msgstr "打印...\tCTRL+P"
\r
721 #: Cura/gui/mainWindow.py:80 Cura/gui/sceneView.py:279
\r
722 msgid "Save GCode..."
\r
723 msgstr "保存GCode..."
\r
725 #: Cura/gui/mainWindow.py:82
\r
726 msgid "Show slice engine log..."
\r
727 msgstr "显示切片引擎记录..."
\r
729 #: Cura/gui/mainWindow.py:86
\r
730 msgid "Open Profile..."
\r
733 #: Cura/gui/mainWindow.py:89
\r
734 msgid "Save Profile..."
\r
737 #: Cura/gui/mainWindow.py:92
\r
738 msgid "Load Profile from GCode..."
\r
739 msgstr "从Gcode中读取配置文件..."
\r
741 #: Cura/gui/mainWindow.py:96
\r
742 msgid "Reset Profile to default"
\r
745 #: Cura/gui/mainWindow.py:101
\r
746 msgid "Preferences...\tCTRL+,"
\r
747 msgstr "偏好配置......\tCTRL+,"
\r
749 #: Cura/gui/mainWindow.py:103 Cura/gui/mainWindow.py:467
\r
750 msgid "Machine settings..."
\r
753 #: Cura/gui/mainWindow.py:109
\r
754 msgid "Recent Model Files"
\r
757 #: Cura/gui/mainWindow.py:116
\r
758 msgid "Recent Profile Files"
\r
761 #: Cura/gui/mainWindow.py:122
\r
765 #: Cura/gui/mainWindow.py:124
\r
769 #: Cura/gui/mainWindow.py:132
\r
770 msgid "Minecraft map import..."
\r
771 msgstr "导入Minecraft地图..."
\r
773 #: Cura/gui/mainWindow.py:136
\r
774 msgid "PID Debugger..."
\r
777 #: Cura/gui/mainWindow.py:138
\r
779 msgid "Auto Firmware Update..."
\r
782 #: Cura/gui/mainWindow.py:141
\r
783 msgid "Copy profile to clipboard"
\r
786 #: Cura/gui/mainWindow.py:145
\r
787 msgid "Print all at once"
\r
790 #: Cura/gui/mainWindow.py:147
\r
791 msgid "Print one at a time"
\r
794 #: Cura/gui/mainWindow.py:154
\r
798 #: Cura/gui/mainWindow.py:160 Cura/util/profile.py:175
\r
802 #: Cura/gui/mainWindow.py:163
\r
803 msgid "Switch to quickprint..."
\r
804 msgstr "切换到快速打印模式..."
\r
806 #: Cura/gui/mainWindow.py:167
\r
807 msgid "Switch to full settings..."
\r
808 msgstr "切换到完整配置模式..."
\r
810 #: Cura/gui/mainWindow.py:172
\r
811 msgid "Open expert settings...\tCTRL+E"
\r
812 msgstr "额外设置...\tCTRL+E"
\r
814 #: Cura/gui/mainWindow.py:176
\r
815 msgid "Run first run wizard..."
\r
816 msgstr "运行首次使用向导..."
\r
818 #: Cura/gui/mainWindow.py:178
\r
819 msgid "Run bed leveling wizard..."
\r
820 msgstr "运行平台调平向导..."
\r
822 #: Cura/gui/mainWindow.py:180
\r
823 msgid "Run head offset wizard..."
\r
824 msgstr "运行多喷头校正向导..."
\r
826 #: Cura/gui/mainWindow.py:183
\r
830 #: Cura/gui/mainWindow.py:186
\r
831 msgid "Online documentation..."
\r
834 #: Cura/gui/mainWindow.py:188
\r
835 msgid "Report a problem..."
\r
838 #: Cura/gui/mainWindow.py:190
\r
839 msgid "Check for update..."
\r
842 #: Cura/gui/mainWindow.py:192
\r
843 msgid "Open YouMagine website..."
\r
844 msgstr "打开YouMagine网站..."
\r
846 #: Cura/gui/mainWindow.py:194
\r
847 msgid "About Cura..."
\r
850 #: Cura/gui/mainWindow.py:196
\r
854 #: Cura/gui/mainWindow.py:376
\r
856 "For \"One at a time\" printing, you need to have entered the correct head "
\r
857 "size and gantry height in the machine settings"
\r
860 #: Cura/gui/mainWindow.py:376
\r
861 msgid "One at a time warning"
\r
864 #: Cura/gui/mainWindow.py:473
\r
865 msgid "Install default firmware..."
\r
868 #: Cura/gui/mainWindow.py:476
\r
869 msgid "Install custom firmware..."
\r
872 #: Cura/gui/mainWindow.py:480
\r
873 msgid "Select profile file to load"
\r
876 #: Cura/gui/mainWindow.py:492
\r
877 msgid "Select gcode file to load profile from"
\r
880 #: Cura/gui/mainWindow.py:507
\r
882 "No profile found in GCode file.\n"
\r
883 "This feature only works with GCode files made by Cura 12.07 or newer."
\r
886 #: Cura/gui/mainWindow.py:507
\r
887 msgid "Profile load error"
\r
890 #: Cura/gui/mainWindow.py:511
\r
891 msgid "Select profile file to save"
\r
894 #: Cura/gui/mainWindow.py:521
\r
896 "This will reset all profile settings to defaults.\n"
\r
897 "Unless you have saved your current profile, all settings will be lost!\n"
\r
898 "Do you really want to reset?"
\r
901 #: Cura/gui/mainWindow.py:521
\r
902 msgid "Profile reset"
\r
905 #: Cura/gui/mainWindow.py:541
\r
907 "Warning: Installing a custom firmware does not guarantee that you machine "
\r
908 "will function correctly, and could damage your machine."
\r
911 #: Cura/gui/mainWindow.py:542 Cura/gui/mainWindow.py:584
\r
912 msgid "Open firmware to upload"
\r
915 #: Cura/gui/mainWindow.py:613
\r
916 msgid "You are running the latest version of Cura!"
\r
917 msgstr "你正在运行最新版本的的Cura!"
\r
919 #: Cura/gui/mainWindow.py:613
\r
923 #: Cura/gui/mainWindow.py:658
\r
927 #: Cura/gui/mainWindow.py:662
\r
931 #: Cura/gui/mainWindow.py:668
\r
935 #: Cura/gui/pluginPanel.py:31
\r
939 #: Cura/gui/pluginPanel.py:35
\r
940 msgid "Open plugin location"
\r
943 #: Cura/gui/pluginPanel.py:36
\r
944 msgid "Enabled plugins"
\r
947 #: Cura/gui/pluginPanel.py:159
\r
948 msgid "You need to select a plugin before you can add anything."
\r
951 #: Cura/gui/pluginPanel.py:159
\r
952 msgid "Error: no plugin selected"
\r
953 msgstr "错误:没有插件可供选择"
\r
955 #: Cura/gui/preferencesDialog.py:14
\r
957 msgid "Preferences"
\r
958 msgstr "偏好配置......\tCTRL+,"
\r
960 #: Cura/gui/preferencesDialog.py:28
\r
961 msgid "Print window"
\r
964 #: Cura/gui/preferencesDialog.py:31
\r
968 #: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478
\r
972 #: Cura/gui/preferencesDialog.py:40
\r
973 msgid "Filament settings"
\r
976 #: Cura/gui/preferencesDialog.py:50
\r
977 msgid "Cura settings"
\r
980 #: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84
\r
981 msgid "Machine settings"
\r
984 #: Cura/gui/preferencesDialog.py:95
\r
985 msgid "Printer head size"
\r
988 #: Cura/gui/preferencesDialog.py:103
\r
990 msgid "Extruder %d"
\r
993 #: Cura/gui/preferencesDialog.py:107
\r
994 msgid "Communication settings"
\r
997 #: Cura/gui/preferencesDialog.py:119
\r
1001 #: Cura/gui/preferencesDialog.py:123
\r
1003 msgid "Add new machine"
\r
1006 #: Cura/gui/preferencesDialog.py:127
\r
1008 msgid "Remove machine"
\r
1011 #: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168
\r
1012 msgid "Change machine name"
\r
1015 #: Cura/gui/preferencesDialog.py:154
\r
1016 msgid "Cannot remove the last machine configuration in Cura"
\r
1019 #: Cura/gui/preferencesDialog.py:154
\r
1020 msgid "Machine remove error"
\r
1023 #: Cura/gui/preferencesDialog.py:168
\r
1024 msgid "Enter the new name:"
\r
1027 #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
\r
1029 msgid "Printing on %s"
\r
1032 #: Cura/gui/printWindow.py:324
\r
1034 "Your computer is running on battery power.\n"
\r
1035 "Connect your computer to AC power or your print might not finish."
\r
1038 #: Cura/gui/printWindow.py:334
\r
1040 "InfoLine from printer connection\n"
\r
1041 "InfoLine from dialog\n"
\r
1043 "More lines for layout\n"
\r
1044 "More lines for layout\n"
\r
1045 "More lines for layout"
\r
1048 #: Cura/gui/printWindow.py:336
\r
1052 #: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
\r
1056 #: Cura/gui/printWindow.py:339
\r
1060 #: Cura/gui/printWindow.py:340
\r
1061 msgid "Cancel print"
\r
1064 #: Cura/gui/printWindow.py:341
\r
1068 #: Cura/gui/sceneView.py:64
\r
1072 #: Cura/gui/sceneView.py:69
\r
1076 #: Cura/gui/sceneView.py:70
\r
1080 #: Cura/gui/sceneView.py:71
\r
1084 #: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
\r
1088 #: Cura/gui/sceneView.py:74
\r
1092 #: Cura/gui/sceneView.py:77
\r
1096 #: Cura/gui/sceneView.py:79
\r
1100 #: Cura/gui/sceneView.py:80
\r
1104 #: Cura/gui/sceneView.py:81
\r
1108 #: Cura/gui/sceneView.py:89
\r
1112 #: Cura/gui/sceneView.py:91
\r
1116 #: Cura/gui/sceneView.py:93
\r
1120 #: Cura/gui/sceneView.py:95
\r
1121 msgid "Size X (mm)"
\r
1122 msgstr "Size X (mm)"
\r
1124 #: Cura/gui/sceneView.py:97
\r
1125 msgid "Size Y (mm)"
\r
1126 msgstr "Size Y (mm)"
\r
1128 #: Cura/gui/sceneView.py:99
\r
1129 msgid "Size Z (mm)"
\r
1130 msgstr "Size Z (mm)"
\r
1132 #: Cura/gui/sceneView.py:101
\r
1133 msgid "Uniform scale"
\r
1136 #: Cura/gui/sceneView.py:104
\r
1140 #: Cura/gui/sceneView.py:104
\r
1144 #: Cura/gui/sceneView.py:104
\r
1148 #: Cura/gui/sceneView.py:104
\r
1149 msgid "Transparent"
\r
1152 #: Cura/gui/sceneView.py:104
\r
1156 #: Cura/gui/sceneView.py:104
\r
1160 #: Cura/gui/sceneView.py:106
\r
1161 msgid "Share on YouMagine"
\r
1164 #: Cura/gui/sceneView.py:204
\r
1165 msgid "Open 3D model"
\r
1168 #: Cura/gui/sceneView.py:229
\r
1169 msgid "Save 3D model"
\r
1172 #: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915
\r
1174 msgid "Print with %s"
\r
1177 #: Cura/gui/sceneView.py:280
\r
1178 msgid "Slice engine log..."
\r
1181 #: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918
\r
1182 msgid "Save toolpath"
\r
1185 #: Cura/gui/sceneView.py:352
\r
1186 msgid "The slicing engine reported the following"
\r
1189 #: Cura/gui/sceneView.py:352
\r
1190 msgid "Engine log..."
\r
1193 #: Cura/gui/sceneView.py:491
\r
1194 msgid "How many copies do you want?"
\r
1197 #: Cura/gui/sceneView.py:491
\r
1198 msgid "Number of copies"
\r
1201 #: Cura/gui/sceneView.py:491
\r
1205 #: Cura/gui/sceneView.py:781
\r
1206 msgid "Center on platform"
\r
1209 #: Cura/gui/sceneView.py:782
\r
1210 msgid "Delete object"
\r
1213 #: Cura/gui/sceneView.py:783
\r
1214 msgid "Multiply object"
\r
1217 #: Cura/gui/sceneView.py:784
\r
1218 msgid "Split object into parts"
\r
1221 #: Cura/gui/sceneView.py:786
\r
1222 msgid "Dual extrusion merge"
\r
1225 #: Cura/gui/sceneView.py:788
\r
1226 msgid "Delete all objects"
\r
1229 #: Cura/gui/sceneView.py:789
\r
1230 msgid "Reload all objects"
\r
1233 #: Cura/gui/sceneView.py:912
\r
1234 msgid "Toolpath to SD"
\r
1237 #: Cura/gui/sceneView.py:1206
\r
1238 msgid "Overhang view not working due to lack of OpenGL shaders support."
\r
1241 #: Cura/gui/simpleMode.py:19
\r
1242 msgid "High quality print"
\r
1245 #: Cura/gui/simpleMode.py:20
\r
1246 msgid "Normal quality print"
\r
1249 #: Cura/gui/simpleMode.py:21
\r
1250 msgid "Fast low quality print"
\r
1253 #: Cura/gui/simpleMode.py:22
\r
1254 msgid "Thin walled cup or vase"
\r
1257 #: Cura/gui/simpleMode.py:32
\r
1258 msgid "Print support structure"
\r
1261 #: Cura/gui/simpleMode.py:37
\r
1262 msgid "Select a quickprint profile:"
\r
1265 #: Cura/gui/simpleMode.py:47
\r
1269 #: Cura/gui/simpleMode.py:51
\r
1273 #: Cura/gui/simpleMode.py:57
\r
1277 #: Cura/gui/simpleMode.py:85
\r
1278 msgid "Exterior Only"
\r
1281 #: Cura/gui/tools/imageToMesh.py:28
\r
1282 msgid "Height (mm)"
\r
1285 #: Cura/gui/tools/imageToMesh.py:32
\r
1289 #: Cura/gui/tools/imageToMesh.py:36
\r
1290 msgid "Width (mm)"
\r
1293 #: Cura/gui/tools/imageToMesh.py:40
\r
1294 msgid "Depth (mm)"
\r
1297 #: Cura/gui/tools/projector.py:42
\r
1301 #: Cura/gui/tools/projector.py:43
\r
1305 #: Cura/gui/tools/projector.py:44
\r
1309 #: Cura/gui/tools/projector.py:45
\r
1310 msgid "Draw curves"
\r
1313 #: Cura/gui/tools/youmagineGui.py:78
\r
1314 msgid "Checking token"
\r
1317 #: Cura/gui/tools/youmagineGui.py:82
\r
1318 msgid "Failed to contact YouMagine.com"
\r
1321 #: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
\r
1322 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
\r
1323 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
\r
1324 msgid "YouMagine error."
\r
1327 #: Cura/gui/tools/youmagineGui.py:100
\r
1328 msgid "Cura is now authorized to share on YouMagine"
\r
1331 #: Cura/gui/tools/youmagineGui.py:100
\r
1332 msgid "YouMagine."
\r
1335 #: Cura/gui/tools/youmagineGui.py:112
\r
1336 msgid "Creating new design on YouMagine..."
\r
1339 #: Cura/gui/tools/youmagineGui.py:116
\r
1340 msgid "Failed to create a design, nothing uploaded!"
\r
1343 #: Cura/gui/tools/youmagineGui.py:120
\r
1345 msgid "Building model %s..."
\r
1348 #: Cura/gui/tools/youmagineGui.py:131
\r
1350 msgid "Uploading model %s..."
\r
1353 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
\r
1354 #: Cura/gui/tools/youmagineGui.py:148
\r
1356 msgid "Failed to upload %s!"
\r
1359 #: Cura/gui/tools/youmagineGui.py:137
\r
1361 msgid "Uploading file %s..."
\r
1364 #: Cura/gui/tools/youmagineGui.py:145
\r
1366 msgid "Uploading image %s..."
\r
1369 #: Cura/gui/tools/youmagineGui.py:153
\r
1370 msgid "Failed to upload snapshot!"
\r
1373 #: Cura/gui/tools/youmagineGui.py:158
\r
1374 msgid "Publishing design..."
\r
1377 #: Cura/gui/tools/youmagineGui.py:230
\r
1378 msgid "Request authorization from YouMagine"
\r
1381 #: Cura/gui/tools/youmagineGui.py:231
\r
1382 msgid "Paste token here"
\r
1385 #: Cura/gui/tools/youmagineGui.py:237
\r
1387 "To share your designs on YouMagine\n"
\r
1388 "you need an account on YouMagine.com\n"
\r
1389 "and authorize Cura to access your account."
\r
1392 #: Cura/gui/tools/youmagineGui.py:239
\r
1394 "This will open a browser window where you can\n"
\r
1395 "authorize Cura to access your YouMagine account.\n"
\r
1396 "You can revoke access at any time\n"
\r
1397 "from YouMagine.com"
\r
1400 #: Cura/gui/tools/youmagineGui.py:274
\r
1401 msgid "Design name"
\r
1404 #: Cura/gui/tools/youmagineGui.py:278
\r
1405 msgid "Publish after upload"
\r
1408 #: Cura/gui/tools/youmagineGui.py:279
\r
1412 #: Cura/gui/tools/youmagineGui.py:287
\r
1416 #: Cura/gui/tools/youmagineGui.py:289
\r
1420 #: Cura/gui/tools/youmagineGui.py:299
\r
1422 "Directly publish the design after uploading.\n"
\r
1423 "Without this check the design will not be public\n"
\r
1424 "until you publish it yourself on YouMagine.com"
\r
1427 #: Cura/gui/tools/youmagineGui.py:305
\r
1428 msgid "Design name:"
\r
1431 #: Cura/gui/tools/youmagineGui.py:307
\r
1432 msgid "Description:"
\r
1435 #: Cura/gui/tools/youmagineGui.py:309
\r
1439 #: Cura/gui/tools/youmagineGui.py:311
\r
1443 #: Cura/gui/tools/youmagineGui.py:314
\r
1447 #: Cura/gui/tools/youmagineGui.py:317
\r
1448 msgid "Related design files:"
\r
1451 #: Cura/gui/tools/youmagineGui.py:340
\r
1452 msgid "The name cannot be empty"
\r
1455 #: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
\r
1456 msgid "New design error."
\r
1459 #: Cura/gui/tools/youmagineGui.py:344
\r
1460 msgid "The description cannot be empty"
\r
1463 #: Cura/gui/tools/youmagineGui.py:370
\r
1464 msgid "No webcam found on your system"
\r
1467 #: Cura/gui/tools/youmagineGui.py:370
\r
1468 msgid "Webcam error"
\r
1471 #: Cura/gui/util/engineResultView.py:168
\r
1473 msgid "Loading toolpath for visualization (%d%%)"
\r
1476 #: Cura/gui/util/openglGui.py:242
\r
1477 msgid "An error has occurred during the 3D view drawing."
\r
1480 #: Cura/gui/util/openglGui.py:250
\r
1481 msgid "3D window error"
\r
1484 #: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172
\r
1485 #: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202
\r
1486 #: Cura/util/profile.py:204
\r
1490 #: Cura/util/profile.py:170
\r
1491 msgid "Layer height (mm)"
\r
1494 #: Cura/util/profile.py:170
\r
1496 "Layer height in millimeters.\n"
\r
1497 "This is the most important setting to determine the quality of your print. "
\r
1498 "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
\r
1499 "0.25mm with an Ultimaker for very fast prints at low quality."
\r
1503 "普通质量可设置为0.2mm,高质量设为0.1mm。\n"
\r
1506 #: Cura/util/profile.py:171
\r
1507 msgid "Shell thickness (mm)"
\r
1510 #: Cura/util/profile.py:171
\r
1512 "Thickness of the outside shell in the horizontal direction.\n"
\r
1513 "This is used in combination with the nozzle size to define the number\n"
\r
1514 "of perimeter lines and the thickness of those perimeter lines."
\r
1517 "通常需要结合你的喷嘴孔径设置成相应倍数,这个参数决定了边缘的走线次数和厚度"
\r
1519 #: Cura/util/profile.py:172
\r
1520 msgid "Enable retraction"
\r
1523 #: Cura/util/profile.py:172
\r
1525 "Retract the filament when the nozzle is moving over a none-printed area. "
\r
1526 "Details about the retraction can be configured in the advanced tab."
\r
1528 "当在非打印区域移动喷头时,适当的回退丝能避免多余的挤出和拉丝\n"
\r
1531 #: Cura/util/profile.py:173 Cura/util/profile.py:174
\r
1535 #: Cura/util/profile.py:173
\r
1536 msgid "Bottom/Top thickness (mm)"
\r
1537 msgstr "底层/顶层厚度(mm)"
\r
1539 #: Cura/util/profile.py:173
\r
1541 "This controls the thickness of the bottom and top layers, the amount of "
\r
1542 "solid layers put down is calculated by the layer thickness and this value.\n"
\r
1543 "Having this value a multiple of the layer thickness makes sense. And keep it "
\r
1544 "near your wall thickness to make an evenly strong part."
\r
1546 "这个参数控制底层和顶层的厚度,通过层厚和这个参数计算需打印出的实心层的数量\n"
\r
1547 "这个数值应是层厚的倍数。让这个参数接近你的壁厚,可以让模型强度更均匀"
\r
1549 #: Cura/util/profile.py:174
\r
1550 msgid "Fill Density (%)"
\r
1553 #: Cura/util/profile.py:174
\r
1555 "This controls how densely filled the insides of your print will be. For a "
\r
1556 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "
\r
1558 "This won't affect the outside of the print and only adjusts how strong the "
\r
1562 "打印实心物体需设置为100%,空心物体设置为0%。通常使用20%填充率\n"
\r
1563 "这个参数不会影响物体的外观,它一般用来调整物体的强度"
\r
1565 #: Cura/util/profile.py:175
\r
1567 "The nozzle size is very important, this is used to calculate the line width "
\r
1568 "of the infill, and used to calculate the amount of outside wall lines and "
\r
1569 "thickness for the wall thickness you entered in the print settings."
\r
1570 msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"
\r
1572 #: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
\r
1573 #: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181
\r
1574 msgid "Speed and Temperature"
\r
1577 #: Cura/util/profile.py:176
\r
1578 msgid "Print speed (mm/s)"
\r
1579 msgstr "打印速度(mm/s)"
\r
1581 #: Cura/util/profile.py:176
\r
1583 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
\r
1584 "s, but for good quality prints you want to print slower. Printing speed "
\r
1585 "depends on a lot of factors. So you will be experimenting with optimal "
\r
1586 "settings for this."
\r
1589 "MostFun打印速度最快可达150mm/s,为获得更好的打印质量,我们建议打印速度设为"
\r
1591 "打印速度的设置要参考很多因素,你可以根据实际情况调试修改"
\r
1593 #: Cura/util/profile.py:177
\r
1594 msgid "Printing temperature (C)"
\r
1597 #: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179
\r
1598 #: Cura/util/profile.py:180
\r
1600 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"
\r
1601 "For PLA a value of 210C is usually used.\n"
\r
1602 "For ABS a value of 230C or higher is required."
\r
1608 #: Cura/util/profile.py:178
\r
1609 msgid "2nd nozzle temperature (C)"
\r
1612 #: Cura/util/profile.py:179
\r
1613 msgid "3th nozzle temperature (C)"
\r
1616 #: Cura/util/profile.py:180
\r
1617 msgid "4th nozzle temperature (C)"
\r
1620 #: Cura/util/profile.py:181
\r
1621 msgid "Bed temperature (C)"
\r
1624 #: Cura/util/profile.py:181
\r
1626 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
\r
1629 #: Cura/util/profile.py:182 Cura/util/profile.py:183
\r
1633 #: Cura/util/profile.py:182
\r
1634 msgid "Touching buildplate"
\r
1637 #: Cura/util/profile.py:182
\r
1638 msgid "Everywhere"
\r
1641 #: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184
\r
1642 #: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226
\r
1643 #: Cura/util/profile.py:227 Cura/util/profile.py:228
\r
1647 #: Cura/util/profile.py:182
\r
1648 msgid "Support type"
\r
1651 #: Cura/util/profile.py:182
\r
1653 "Type of support structure build.\n"
\r
1654 "\"Touching buildplate\" is the most commonly used support setting.\n"
\r
1656 "None does not do any support.\n"
\r
1657 "Touching buildplate only creates support where the support structure will "
\r
1658 "touch the build platform.\n"
\r
1659 "Everywhere creates support even on top of parts of the model."
\r
1662 "通常使用\"Touching buildplate\"建立支撑 \n"
\r
1663 "选择 None 不会建立支撑\n"
\r
1664 "选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"
\r
1665 "选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"
\r
1667 #: Cura/util/profile.py:183 Cura/util/profile.py:232
\r
1671 #: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234
\r
1672 #: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237
\r
1673 #: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240
\r
1677 #: Cura/util/profile.py:183
\r
1678 msgid "Platform adhesion type"
\r
1681 #: Cura/util/profile.py:183
\r
1683 "Different options that help in preventing corners from lifting due to "
\r
1685 "Brim adds a single layer thick flat area around your object which is easy to "
\r
1686 "cut off afterwards, and it is the recommended option.\n"
\r
1687 "Raft adds a thick raster below the object and a thin interface between this "
\r
1688 "and your object.\n"
\r
1689 "(Note that enabling the brim or raft disables the skirt)"
\r
1691 "开启这个选项可以防止底面起翘\n"
\r
1692 "Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"
\r
1693 "Raft会打印模型前打印一个网状底座\n"
\r
1694 "(注意:开启粘附平台后,会关闭打印开始前的边缘走线功能)"
\r
1696 #: Cura/util/profile.py:184
\r
1700 #: Cura/util/profile.py:184
\r
1701 msgid "First extruder"
\r
1704 #: Cura/util/profile.py:184
\r
1705 msgid "Second extruder"
\r
1708 #: Cura/util/profile.py:184
\r
1709 msgid "Support dual extrusion"
\r
1712 #: Cura/util/profile.py:184
\r
1714 "Which extruder to use for support material, for break-away support you can "
\r
1715 "use both extruders.\n"
\r
1716 "But if one of the materials is more expensive then the other you could "
\r
1717 "select an extruder to use for support material. This causes more extruder "
\r
1719 "You can also use the 2nd extruder for soluble support materials."
\r
1722 #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
\r
1723 msgid "Dual extrusion"
\r
1726 #: Cura/util/profile.py:185
\r
1727 msgid "Wipe&prime tower"
\r
1730 #: Cura/util/profile.py:185
\r
1732 "The wipe-tower is a tower printed on every layer when switching between "
\r
1734 "The old nozzle is wiped off on the tower before the new nozzle is used to "
\r
1735 "print the 2nd color."
\r
1738 #: Cura/util/profile.py:186
\r
1739 msgid "Wipe&prime tower volume per layer (mm3)"
\r
1742 #: Cura/util/profile.py:186
\r
1744 "The amount of material put in the wipe/prime tower.\n"
\r
1745 "This is done in volume because in general you want to extrude a\n"
\r
1746 "certain amount of volume to get the extruder going, independent on the layer "
\r
1748 "This means that with thinner layers, your tower gets bigger."
\r
1751 #: Cura/util/profile.py:187
\r
1752 msgid "Ooze shield"
\r
1755 #: Cura/util/profile.py:187
\r
1757 "The ooze shield is a 1 line thick shell around the object which stands a few "
\r
1758 "mm from the object.\n"
\r
1759 "This shield catches any oozing from the unused nozzle in dual-extrusion."
\r
1762 #: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190
\r
1763 #: Cura/util/profile.py:191 Cura/util/profile.py:192
\r
1767 #: Cura/util/profile.py:188
\r
1768 msgid "Diameter (mm)"
\r
1771 #: Cura/util/profile.py:188
\r
1773 "Diameter of your filament, as accurately as possible.\n"
\r
1774 "If you cannot measure this value you will have to calibrate it, a higher "
\r
1775 "number means less extrusion, a smaller number generates more extrusion."
\r
1778 "MostFun Sail使用的耗材的直径为1.75mm"
\r
1780 #: Cura/util/profile.py:189
\r
1781 msgid "Diameter2 (mm)"
\r
1784 #: Cura/util/profile.py:189
\r
1786 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
\r
1787 "as for nozzle 1."
\r
1790 #: Cura/util/profile.py:190
\r
1791 msgid "Diameter3 (mm)"
\r
1794 #: Cura/util/profile.py:190
\r
1796 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
\r
1797 "as for nozzle 1."
\r
1800 #: Cura/util/profile.py:191
\r
1801 msgid "Diameter4 (mm)"
\r
1804 #: Cura/util/profile.py:191
\r
1806 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
\r
1807 "as for nozzle 1."
\r
1810 #: Cura/util/profile.py:192
\r
1814 #: Cura/util/profile.py:192
\r
1816 "Flow compensation, the amount of material extruded is multiplied by this "
\r
1818 msgstr "流量补偿,最终挤出量是设定的挤出量乘以这个值"
\r
1820 #: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
\r
1821 #: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
\r
1822 #: Cura/util/profile.py:199
\r
1823 msgid "Retraction"
\r
1826 #: Cura/util/profile.py:193
\r
1827 msgid "Speed (mm/s)"
\r
1828 msgstr "回退速度(mm/s)"
\r
1830 #: Cura/util/profile.py:193
\r
1832 "Speed at which the filament is retracted, a higher retraction speed works "
\r
1833 "better. But a very high retraction speed can lead to filament grinding."
\r
1836 "设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"
\r
1838 #: Cura/util/profile.py:194
\r
1839 msgid "Distance (mm)"
\r
1842 #: Cura/util/profile.py:194
\r
1844 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
\r
1845 "seems to generate good results."
\r
1848 "设置为0时不会回退,在MostFun Sail设置为3mm时效果比较好"
\r
1850 #: Cura/util/profile.py:195
\r
1851 msgid "Dual extrusion switch amount (mm)"
\r
1854 #: Cura/util/profile.py:195
\r
1856 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
\r
1857 "no retraction at all. A value of 16.0mm seems to generate good results."
\r
1860 #: Cura/util/profile.py:196
\r
1861 msgid "Minimum travel (mm)"
\r
1862 msgstr "最小移动距离(mm)"
\r
1864 #: Cura/util/profile.py:196
\r
1866 "Minimum amount of travel needed for a retraction to happen at all. To make "
\r
1867 "sure you do not get a lot of retractions in a small area."
\r
1870 #: Cura/util/profile.py:197
\r
1871 msgid "Enable combing"
\r
1874 #: Cura/util/profile.py:197
\r
1876 "Combing is the act of avoiding holes in the print for the head to travel "
\r
1877 "over. If combing is disabled the printer head moves straight from the start "
\r
1878 "point to the end point and it will always retract."
\r
1880 "梳理功能可以避免喷头移动后产生的孔\n"
\r
1881 "如果关闭了该功能,打印头会在移动过程中一直处在回退状态"
\r
1883 #: Cura/util/profile.py:198
\r
1884 msgid "Minimal extrusion before retracting (mm)"
\r
1885 msgstr "回退前最小挤出量(mm)"
\r
1887 #: Cura/util/profile.py:198
\r
1889 "The minimal amount of extrusion that needs to be done before retracting "
\r
1890 "again if a retraction needs to happen before this minimal is reached the "
\r
1891 "retraction is ignored.\n"
\r
1892 "This avoids retracting a lot on the same piece of filament which flattens "
\r
1893 "the filament and causes grinding issues."
\r
1896 #: Cura/util/profile.py:199
\r
1897 msgid "Z hop when retracting (mm)"
\r
1898 msgstr "回退时Z轴抬起(mm)"
\r
1900 #: Cura/util/profile.py:199
\r
1902 "When a retraction is done, the head is lifted by this amount to travel over "
\r
1903 "the print. A value of 0.075 works well. This feature has a lot of positive "
\r
1904 "effect on delta towers."
\r
1907 #: Cura/util/profile.py:200
\r
1908 msgid "Initial layer thickness (mm)"
\r
1909 msgstr "初始层厚 (mm)"
\r
1911 #: Cura/util/profile.py:200
\r
1913 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
\r
1914 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
\r
1915 "the other layers."
\r
1917 "底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"
\r
1920 #: Cura/util/profile.py:201
\r
1921 msgid "Initial layer line width (%)"
\r
1924 #: Cura/util/profile.py:201
\r
1926 "Extra width factor for the extrusion on the first layer, on some printers "
\r
1927 "it's good to have wider extrusion on the first layer to get better bed "
\r
1931 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时,可以使用这个参"
\r
1934 #: Cura/util/profile.py:202
\r
1935 msgid "Cut off object bottom (mm)"
\r
1938 #: Cura/util/profile.py:202
\r
1940 "Sinks the object into the platform, this can be used for objects that do not "
\r
1941 "have a flat bottom and thus create a too small first layer."
\r
1944 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时,可以使用这个参"
\r
1947 #: Cura/util/profile.py:204
\r
1948 msgid "Dual extrusion overlap (mm)"
\r
1949 msgstr "两次挤出重叠(mm)"
\r
1951 #: Cura/util/profile.py:204
\r
1953 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
\r
1954 "bonds the different colors together."
\r
1955 msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"
\r
1957 #: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207
\r
1958 #: Cura/util/profile.py:208 Cura/util/profile.py:209
\r
1962 #: Cura/util/profile.py:205
\r
1963 msgid "Travel speed (mm/s)"
\r
1964 msgstr "移动速度 (mm/s)"
\r
1966 #: Cura/util/profile.py:205
\r
1968 "Speed at which travel moves are done, a well built Ultimaker can reach "
\r
1969 "speeds of 250mm/s. But some machines might miss steps then."
\r
1972 "此移动速度指非打印状态下的移动速度\n"
\r
1973 "建议不要超过150mm/s,否则可能造成电机丢步"
\r
1975 #: Cura/util/profile.py:206
\r
1976 msgid "Bottom layer speed (mm/s)"
\r
1977 msgstr "底层速度 (mm/s)"
\r
1979 #: Cura/util/profile.py:206
\r
1981 "Print speed for the bottom layer, you want to print the first layer slower "
\r
1982 "so it sticks better to the printer bed."
\r
1985 "这个值通常会设置的很低,这样能使底层和平台粘附的更好"
\r
1987 #: Cura/util/profile.py:207
\r
1988 msgid "Infill speed (mm/s)"
\r
1989 msgstr "填充速度 (mm/s)"
\r
1991 #: Cura/util/profile.py:207
\r
1993 "Speed at which infill parts are printed. If set to 0 then the print speed is "
\r
1994 "used for the infill. Printing the infill faster can greatly reduce printing "
\r
1995 "time, but this can negatively affect print quality."
\r
1998 "当设置为0时,会使用打印速度作为填充速度。高速打印填充能节省很多打印时间,但是"
\r
1999 "可能会对打印质量照成一定消极影响"
\r
2001 #: Cura/util/profile.py:208
\r
2002 msgid "Outer shell speed (mm/s)"
\r
2003 msgstr "外壳速度 (mm/s)"
\r
2005 #: Cura/util/profile.py:208
\r
2007 "Speed at which outer shell is printed. If set to 0 then the print speed is "
\r
2008 "used. Printing the outer shell at a lower speed improves the final skin "
\r
2009 "quality. However, having a large difference between the inner shell speed "
\r
2010 "and the outer shell speed will effect quality in a negative way."
\r
2013 "当设置为0时,会使用打印速度作为外壳速度\n"
\r
2014 "使用较低的打印速度可以提高模型打印质量,但是如果外壳和内部的打印速度相差较"
\r
2015 "大,可能会对打印质量有一些消极影响"
\r
2017 #: Cura/util/profile.py:209
\r
2018 msgid "Inner shell speed (mm/s)"
\r
2019 msgstr "内壁速度 (mm/s)"
\r
2021 #: Cura/util/profile.py:209
\r
2023 "Speed at which inner shells are printed. If set to 0 then the print speed is "
\r
2024 "used. Printing the inner shell faster then the outer shell will reduce "
\r
2025 "printing time. It is good to set this somewhere in between the outer shell "
\r
2026 "speed and the infill/printing speed."
\r
2029 "当设置为0时,会使用打印速度作为内壁速度\n"
\r
2030 "使用较高的打印机速度可以减少模型的打印时间,需要设置好外壳速度、打印速度、填"
\r
2033 #: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216
\r
2034 #: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219
\r
2035 #: Cura/util/profile.py:220
\r
2039 #: Cura/util/profile.py:210
\r
2040 msgid "Minimal layer time (sec)"
\r
2041 msgstr "每层最小打印时间(sec)"
\r
2043 #: Cura/util/profile.py:210
\r
2045 "Minimum time spent in a layer, gives the layer time to cool down before the "
\r
2046 "next layer is put on top. If the layer will be placed down too fast the "
\r
2047 "printer will slow down to make sure it has spent at least this amount of "
\r
2048 "seconds printing this layer."
\r
2051 "在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完,那么打印机会"
\r
2052 "适当降低速度,以保证有这个设定时间"
\r
2054 #: Cura/util/profile.py:211
\r
2055 msgid "Enable cooling fan"
\r
2058 #: Cura/util/profile.py:211
\r
2060 "Enable the cooling fan during the print. The extra cooling from the cooling "
\r
2061 "fan is essential during faster prints."
\r
2064 "在快速打印时开启风扇冷却是很有必要的"
\r
2066 #: Cura/util/profile.py:213
\r
2067 msgid "Line count"
\r
2070 #: Cura/util/profile.py:213
\r
2072 "The skirt is a line drawn around the object at the first layer. This helps "
\r
2073 "to prime your extruder, and to see if the object fits on your platform.\n"
\r
2074 "Setting this to 0 will disable the skirt. Multiple skirt lines can help "
\r
2075 "priming your extruder better for small objects."
\r
2078 #: Cura/util/profile.py:214
\r
2079 msgid "Start distance (mm)"
\r
2082 #: Cura/util/profile.py:214
\r
2084 "The distance between the skirt and the first layer.\n"
\r
2085 "This is the minimal distance, multiple skirt lines will be put outwards from "
\r
2089 #: Cura/util/profile.py:215
\r
2090 msgid "Minimal length (mm)"
\r
2093 #: Cura/util/profile.py:215
\r
2095 "The minimal length of the skirt, if this minimal length is not reached it "
\r
2096 "will add more skirt lines to reach this minimal lenght.\n"
\r
2097 "Note: If the line count is set to 0 this is ignored."
\r
2100 #: Cura/util/profile.py:216
\r
2101 msgid "Fan full on at height (mm)"
\r
2102 msgstr "风扇全速开启高度(mm)"
\r
2104 #: Cura/util/profile.py:216
\r
2106 "The height at which the fan is turned on completely. For the layers below "
\r
2107 "this the fan speed is scaled linearly with the fan off at layer 0."
\r
2110 #: Cura/util/profile.py:217
\r
2111 msgid "Fan speed min (%)"
\r
2112 msgstr "风扇最小速度(%)"
\r
2114 #: Cura/util/profile.py:217
\r
2116 "When the fan is turned on, it is enabled at this speed setting. If cool "
\r
2117 "slows down the layer, the fan is adjusted between the min and max speed. "
\r
2118 "Minimal fan speed is used if the layer is not slowed down due to cooling."
\r
2121 #: Cura/util/profile.py:218
\r
2122 msgid "Fan speed max (%)"
\r
2123 msgstr "风扇最大速度(%)"
\r
2125 #: Cura/util/profile.py:218
\r
2127 "When the fan is turned on, it is enabled at this speed setting. If cool "
\r
2128 "slows down the layer, the fan is adjusted between the min and max speed. "
\r
2129 "Maximal fan speed is used if the layer is slowed down due to cooling by more "
\r
2133 #: Cura/util/profile.py:219
\r
2134 msgid "Minimum speed (mm/s)"
\r
2135 msgstr "最小速度 (mm/s)"
\r
2137 #: Cura/util/profile.py:219
\r
2139 "The minimal layer time can cause the print to slow down so much it starts to "
\r
2140 "ooze. The minimal feedrate protects against this. Even if a print gets "
\r
2141 "slowed down it will never be slower than this minimal speed."
\r
2144 #: Cura/util/profile.py:220
\r
2145 msgid "Cool head lift"
\r
2148 #: Cura/util/profile.py:220
\r
2150 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "
\r
2151 "the extra time so the minimal layer time is always hit."
\r
2154 #: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
\r
2158 #: Cura/util/profile.py:221
\r
2159 msgid "Solid infill top"
\r
2162 #: Cura/util/profile.py:221
\r
2164 "Create a solid top surface, if set to false the top is filled with the fill "
\r
2165 "percentage. Useful for cups/vases."
\r
2168 #: Cura/util/profile.py:222
\r
2169 msgid "Solid infill bottom"
\r
2172 #: Cura/util/profile.py:222
\r
2174 "Create a solid bottom surface, if set to false the bottom is filled with the "
\r
2175 "fill percentage. Useful for buildings."
\r
2178 #: Cura/util/profile.py:223
\r
2179 msgid "Infill overlap (%)"
\r
2182 #: Cura/util/profile.py:223
\r
2184 "Amount of overlap between the infill and the walls. There is a slight "
\r
2185 "overlap with the walls and the infill so the walls connect firmly to the "
\r
2189 #: Cura/util/profile.py:224
\r
2190 msgid "Structure type"
\r
2193 #: Cura/util/profile.py:224
\r
2195 "The type of support structure.\n"
\r
2196 "Grid is very strong and can come off in 1 piece, however, sometimes it is "
\r
2198 "Lines are single walled lines that break off one at a time. Which is more "
\r
2199 "work to remove, but as it is less strong it does work better on tricky "
\r
2203 #: Cura/util/profile.py:225
\r
2204 msgid "Overhang angle for support (deg)"
\r
2205 msgstr "支撑临界角(deg)"
\r
2207 #: Cura/util/profile.py:225
\r
2209 "The minimal angle that overhangs need to have to get support. With 0 degree "
\r
2210 "being horizontal and 90 degree being vertical."
\r
2213 #: Cura/util/profile.py:226
\r
2214 msgid "Fill amount (%)"
\r
2217 #: Cura/util/profile.py:226
\r
2220 "Amount of infill structure in the support material, less material gives "
\r
2221 "weaker support which is easier to remove. 15% seems to be a good average."
\r
2224 #: Cura/util/profile.py:227
\r
2225 msgid "Distance X/Y (mm)"
\r
2228 #: Cura/util/profile.py:227
\r
2230 "Distance of the support material from the print, in the X/Y directions.\n"
\r
2231 "0.7mm gives a nice distance from the print so the support does not stick to "
\r
2235 #: Cura/util/profile.py:228
\r
2236 msgid "Distance Z (mm)"
\r
2239 #: Cura/util/profile.py:228
\r
2241 "Distance from the top/bottom of the support to the print. A small gap here "
\r
2242 "makes it easier to remove the support but makes the print a bit uglier.\n"
\r
2243 "0.15mm gives a good seperation of the support material."
\r
2246 #: Cura/util/profile.py:229
\r
2247 msgid "Spiralize the outer contour"
\r
2250 #: Cura/util/profile.py:229
\r
2252 "Spiralize is smoothing out the Z move of the outer edge. This will create a "
\r
2253 "steady Z increase over the whole print. This feature turns a solid object "
\r
2254 "into a single walled print with a solid bottom.\n"
\r
2255 "This feature used to be called Joris in older versions."
\r
2258 "打印出个表面非常光滑,但会丢失内部填充"
\r
2260 #: Cura/util/profile.py:230
\r
2261 msgid "Only follow mesh surface"
\r
2264 #: Cura/util/profile.py:230
\r
2266 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "
\r
2267 "infill, no top/bottom, nothing."
\r
2268 msgstr "开启后仅打印表面,顶、底、内部填充都会丢失"
\r
2270 #: Cura/util/profile.py:232
\r
2271 msgid "Brim line amount"
\r
2274 #: Cura/util/profile.py:232
\r
2276 "The amount of lines used for a brim, more lines means a larger brim which "
\r
2277 "sticks better, but this also makes your effective print area smaller."
\r
2280 #: Cura/util/profile.py:233
\r
2281 msgid "Extra margin (mm)"
\r
2284 #: Cura/util/profile.py:233
\r
2286 "If the raft is enabled, this is the extra raft area around the object which "
\r
2287 "is also rafted. Increasing this margin will create a stronger raft while "
\r
2288 "using more material and leaving less area for your print."
\r
2291 #: Cura/util/profile.py:234
\r
2292 msgid "Line spacing (mm)"
\r
2295 #: Cura/util/profile.py:234
\r
2297 "When you are using the raft this is the distance between the centerlines of "
\r
2301 #: Cura/util/profile.py:235
\r
2302 msgid "Base thickness (mm)"
\r
2303 msgstr "基底层厚度(mm)"
\r
2305 #: Cura/util/profile.py:235
\r
2307 "When you are using the raft this is the thickness of the base layer which is "
\r
2311 #: Cura/util/profile.py:236
\r
2312 msgid "Base line width (mm)"
\r
2313 msgstr "基底层走线宽度(mm)"
\r
2315 #: Cura/util/profile.py:236
\r
2317 "When you are using the raft this is the width of the base layer lines which "
\r
2321 #: Cura/util/profile.py:237
\r
2322 msgid "Interface thickness (mm)"
\r
2323 msgstr "接触层厚度(mm)"
\r
2325 #: Cura/util/profile.py:237
\r
2327 "When you are using the raft this is the thickness of the interface layer "
\r
2328 "which is put down."
\r
2331 #: Cura/util/profile.py:238
\r
2332 msgid "Interface line width (mm)"
\r
2333 msgstr "接触层走线宽度 (mm)"
\r
2335 #: Cura/util/profile.py:238
\r
2337 "When you are using the raft this is the width of the interface layer lines "
\r
2338 "which are put down."
\r
2341 #: Cura/util/profile.py:239
\r
2345 #: Cura/util/profile.py:239
\r
2347 "Gap between the last layer of the raft and the first printing layer. A small "
\r
2348 "gap of 0.2mm works wonders on PLA and makes the raft easy to remove."
\r
2351 "这个间隙能让模型更容易取下,使用PLA建议设为0.2mm"
\r
2353 #: Cura/util/profile.py:240
\r
2354 msgid "Surface layers"
\r
2357 #: Cura/util/profile.py:240
\r
2359 "Amount of surface layers put on top of the raft, these are fully filled "
\r
2360 "layers on which the model is printed."
\r
2363 #: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243
\r
2364 #: Cura/util/profile.py:244
\r
2365 msgid "Fix horrible"
\r
2368 #: Cura/util/profile.py:241
\r
2369 msgid "Combine everything (Type-A)"
\r
2370 msgstr "闭合面片(Type-A)"
\r
2372 #: Cura/util/profile.py:241 Cura/util/profile.py:242
\r
2374 "This expert option adds all parts of the model together. The result is "
\r
2375 "usually that internal cavities disappear. Depending on the model this can be "
\r
2376 "intended or not. Enabling this option is at your own risk. Type-A is "
\r
2377 "dependent on the model normals and tries to keep some internal holes intact. "
\r
2378 "Type-B ignores all internal holes and only keeps the outside shape per layer."
\r
2381 #: Cura/util/profile.py:242
\r
2382 msgid "Combine everything (Type-B)"
\r
2383 msgstr "闭合面片(Type-B)"
\r
2385 #: Cura/util/profile.py:243
\r
2386 msgid "Keep open faces"
\r
2389 #: Cura/util/profile.py:243
\r
2391 "This expert option keeps all the open bits of the model intact. Normally "
\r
2392 "Cura tries to stitch up small holes and remove everything with big holes, "
\r
2393 "but this option keeps bits that are not properly part of anything and just "
\r
2394 "goes with whatever is left. This option is usually not what you want, but it "
\r
2395 "might enable you to slice models otherwise failing to produce proper paths.\n"
\r
2396 "As with all \"Fix horrible\" options, results may vary and use at your own "
\r
2400 #: Cura/util/profile.py:244
\r
2401 msgid "Extensive stitching"
\r
2404 #: Cura/util/profile.py:244
\r
2406 "Extensive stitching tries to fix up open holes in the model by closing the "
\r
2407 "hole with touching polygons. This algorthm is quite expensive and could "
\r
2408 "introduce a lot of processing time.\n"
\r
2409 "As with all \"Fix horrible\" options, results may vary and use at your own "
\r
2413 #: Cura/util/profile.py:470
\r
2414 msgid "Save profile on slice"
\r
2417 #: Cura/util/profile.py:470
\r
2419 "When slicing save the profile as [stl_file]_profile.ini next to the model."
\r
2422 #: Cura/util/profile.py:471
\r
2423 msgid "Cost (price/kg)"
\r
2426 #: Cura/util/profile.py:471
\r
2427 msgid "Cost of your filament per kg, to estimate the cost of the final print."
\r
2430 #: Cura/util/profile.py:472
\r
2431 msgid "Cost (price/m)"
\r
2434 #: Cura/util/profile.py:472
\r
2436 "Cost of your filament per meter, to estimate the cost of the final print."
\r
2439 #: Cura/util/profile.py:473
\r
2440 msgid "Auto detect SD card drive"
\r
2443 #: Cura/util/profile.py:473
\r
2445 "Auto detect the SD card. You can disable this because on some systems "
\r
2446 "external hard-drives or USB sticks are detected as SD card."
\r
2449 #: Cura/util/profile.py:474
\r
2450 msgid "Check for updates"
\r
2453 #: Cura/util/profile.py:474
\r
2454 msgid "Check for newer versions of Cura on startup"
\r
2457 #: Cura/util/profile.py:475
\r
2458 msgid "Send usage statistics"
\r
2461 #: Cura/util/profile.py:475
\r
2462 msgid "Submit anonymous usage information to improve future versions of Cura"
\r
2465 #: Cura/util/profile.py:477
\r
2466 msgid "Density (kg/m3)"
\r
2469 #: Cura/util/profile.py:477
\r
2471 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
\r
2472 "This value is used to estimate the weight if the filament used for the print."
\r
2475 #: Cura/util/profile.py:478
\r
2477 "Change the language in which Cura runs. Switching language requires a "
\r
2481 #: Cura/util/profile.py:481
\r
2482 msgid "Model colour"
\r
2485 #: Cura/util/profile.py:481
\r
2486 msgid "Display color for first extruder"
\r
2489 #: Cura/util/profile.py:482
\r
2490 msgid "Model colour (2)"
\r
2493 #: Cura/util/profile.py:482
\r
2494 msgid "Display color for second extruder"
\r
2497 #: Cura/util/profile.py:483
\r
2498 msgid "Model colour (3)"
\r
2501 #: Cura/util/profile.py:483
\r
2502 msgid "Display color for third extruder"
\r
2505 #: Cura/util/profile.py:484
\r
2506 msgid "Model colour (4)"
\r
2509 #: Cura/util/profile.py:484
\r
2510 msgid "Display color for forth extruder"
\r
2513 #: Cura/util/profile.py:485
\r
2514 msgid "Printing window type"
\r
2517 #: Cura/util/profile.py:485
\r
2518 msgid "Select the interface used for USB printing."
\r
2521 #: Cura/util/profile.py:497
\r
2522 msgid "Maximum width (mm)"
\r
2523 msgstr "最大宽度 (mm)"
\r
2525 #: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499
\r
2526 msgid "Size of the machine in mm"
\r
2529 #: Cura/util/profile.py:498
\r
2530 msgid "Maximum depth (mm)"
\r
2533 #: Cura/util/profile.py:499
\r
2534 msgid "Maximum height (mm)"
\r
2537 #: Cura/util/profile.py:500
\r
2538 msgid "Machine center 0,0"
\r
2541 #: Cura/util/profile.py:500
\r
2543 "Machines firmware defines the center of the bed as 0,0 instead of the front "
\r
2547 #: Cura/util/profile.py:501
\r
2548 msgid "Build area shape"
\r
2551 #: Cura/util/profile.py:501
\r
2552 msgid "The shape of machine build area."
\r
2555 #: Cura/util/profile.py:503
\r
2557 "If you have an heated bed, this enabled heated bed settings (requires "
\r
2561 #: Cura/util/profile.py:504
\r
2562 msgid "GCode Flavor"
\r
2565 #: Cura/util/profile.py:504
\r
2567 "Flavor of generated GCode.\n"
\r
2568 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
\r
2569 "UltiGCode is a variation of the RepRap GCode which puts more settings in the "
\r
2570 "machine instead of the slicer.\n"
\r
2571 "MakerBot GCode has a few changes in the way GCode is generated, but still "
\r
2572 "requires MakerWare to generate to X3G.\n"
\r
2573 "BFB style generates RPM based code.\n"
\r
2574 "Mach3 uses A,B,C instead of E for extruders."
\r
2577 #: Cura/util/profile.py:505
\r
2578 msgid "Extruder count"
\r
2581 #: Cura/util/profile.py:505
\r
2582 msgid "Amount of extruders in your machine."
\r
2585 #: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510
\r
2589 #: Cura/util/profile.py:506 Cura/util/profile.py:507
\r
2590 msgid "The offset of your secondary extruder compared to the primary."
\r
2593 #: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511
\r
2597 #: Cura/util/profile.py:508 Cura/util/profile.py:509
\r
2598 msgid "The offset of your tertiary extruder compared to the primary."
\r
2601 #: Cura/util/profile.py:510 Cura/util/profile.py:511
\r
2602 msgid "The offset of your forth extruder compared to the primary."
\r
2605 #: Cura/util/profile.py:512
\r
2606 msgid "E-Steps per 1mm filament"
\r
2609 #: Cura/util/profile.py:512
\r
2611 "Amount of steps per mm filament extrusion. If set to 0 then this value is "
\r
2612 "ignored and the value in your firmware is used."
\r
2615 #: Cura/util/profile.py:513
\r
2616 msgid "Serial port"
\r
2619 #: Cura/util/profile.py:513
\r
2620 msgid "Serial port to use for communication with the printer"
\r
2623 #: Cura/util/profile.py:515
\r
2627 #: Cura/util/profile.py:515
\r
2629 "Speed of the serial port communication\n"
\r
2630 "Needs to match your firmware settings\n"
\r
2631 "Common values are 250000, 115200, 57600"
\r
2634 #: Cura/util/profile.py:518
\r
2635 msgid "Head size towards X min (mm)"
\r
2638 #: Cura/util/profile.py:518
\r
2640 "The head size when printing multiple objects, measured from the tip of the "
\r
2641 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
\r
2642 "is on the left side."
\r
2645 #: Cura/util/profile.py:519
\r
2646 msgid "Head size towards Y min (mm)"
\r
2649 #: Cura/util/profile.py:519 Cura/util/profile.py:520
\r
2651 "The head size when printing multiple objects, measured from the tip of the "
\r
2652 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
\r
2653 "is on the left side."
\r
2656 #: Cura/util/profile.py:520
\r
2657 msgid "Head size towards X max (mm)"
\r
2660 #: Cura/util/profile.py:521
\r
2661 msgid "Head size towards Y max (mm)"
\r
2664 #: Cura/util/profile.py:521
\r
2666 "The head size when printing multiple objects, measured from the tip of the "
\r
2667 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
\r
2668 "is on the left side."
\r
2671 #: Cura/util/profile.py:522
\r
2672 msgid "Printer gantry height (mm)"
\r
2675 #: Cura/util/profile.py:522
\r
2677 "The height of the gantry holding up the printer head. If an object is higher "
\r
2678 "then this then you cannot print multiple objects one for one. 60mm for an "
\r
2682 #: Cura/util/profile.py:524
\r
2684 msgid "More flow than 150% is rare and usually not recommended."
\r
2687 #: Cura/util/profile.py:525
\r
2689 msgid "Less flow than 50% is rare and usually not recommended."
\r
2692 #: Cura/util/profile.py:526
\r
2695 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
\r
2696 "are not recommended."
\r
2699 #: Cura/util/profile.py:528
\r
2701 "It is highly unlikely that your machine can achieve a printing speed above "
\r
2705 #: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532
\r
2706 #: Cura/util/profile.py:533
\r
2707 msgid "Temperatures above 260C could damage your machine, be careful!"
\r
2710 #: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536
\r
2711 #: Cura/util/profile.py:537
\r
2713 "Are you sure your filament is that thick? Normal filament is around 3mm or "
\r
2717 #: Cura/util/profile.py:538
\r
2719 "It is highly unlikely that your machine can achieve a travel speed above "
\r
2723 #: Cura/util/profile.py:539
\r
2726 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
\r
2727 "results and is not recommended."
\r
2730 #: Cura/util/sliceEngine.py:92
\r
2732 msgid "%d minutes"
\r
2735 #: Cura/util/sliceEngine.py:94
\r
2737 msgid "%d hour %d minutes"
\r
2740 #: Cura/util/sliceEngine.py:95
\r
2742 msgid "%d hours %d minutes"
\r
2745 #: Cura/util/sliceEngine.py:100
\r
2747 msgid "%0.2f meter %0.0f gram"
\r