1 # SOME DESCRIPTIVE TITLE.
3 # This file is distributed under the same license as the Cura package.
4 # Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
8 "Project-Id-Version: Cura\n"
9 "Report-Msgid-Bugs-To: \n"
10 "POT-Creation-Date: 2014-07-28 17:57+0200\n"
11 "PO-Revision-Date: 2014-09-29 16:02+0800\n"
13 "Language-Team: coloz <clz@clz.me>\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17 "X-Generator: Poedit 1.6.8\n"
18 "Language: zh_Hans_CN\n"
19 "Plural-Forms: nplurals=1; plural=0;\n"
21 #: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566
22 msgid "A new version of Cura is available, would you like to download?"
25 #: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566
26 msgid "New version available"
29 #: Cura/gui/configWizard.py:223
30 msgid "Add new machine wizard"
33 #: Cura/gui/configWizard.py:225
34 msgid "First time run wizard"
37 #: Cura/gui/configWizard.py:226
38 msgid "Welcome, and thanks for trying Cura!"
41 #: Cura/gui/configWizard.py:228
42 msgid "This wizard will help you in setting up Cura for your machine."
43 msgstr "向导将协助你,为你的机型配置Cura"
45 #: Cura/gui/configWizard.py:262
46 msgid "Select which Printrbot machine you have:"
49 #: Cura/gui/configWizard.py:299
50 msgid "The following pre-defined machine profiles are available"
53 #: Cura/gui/configWizard.py:300
55 "Note that these profiles are not guaranteed to give good results,\n"
56 "or work at all. Extra tweaks might be required.\n"
57 "If you find issues with the predefined profiles,\n"
58 "or want an extra profile.\n"
59 "Please report it at the github issue tracker."
62 #: Cura/gui/configWizard.py:330
63 msgid "Cura is now ready to be used!"
66 #: Cura/gui/configWizard.py:335
68 "RepRap machines can be vastly different, so here you can set your own "
72 #: Cura/gui/configWizard.py:336
74 "Be sure to review the default profile before running it on your machine."
77 #: Cura/gui/configWizard.py:337
79 "If you like a default profile for your machine added,\n"
80 "then make an issue on github."
83 #: Cura/gui/configWizard.py:339
84 msgid "You will have to manually install Marlin or Sprinter firmware."
87 #: Cura/gui/configWizard.py:341
91 #: Cura/gui/configWizard.py:342
92 msgid "Machine width (mm)"
95 #: Cura/gui/configWizard.py:343
96 msgid "Machine depth (mm)"
99 #: Cura/gui/configWizard.py:344
100 msgid "Machine height (mm)"
103 #: Cura/gui/configWizard.py:345 Cura/util/profile.py:175
104 msgid "Nozzle size (mm)"
107 #: Cura/gui/configWizard.py:346 Cura/util/profile.py:503
111 #: Cura/gui/configWizard.py:347
112 msgid "Bed center is 0,0,0 (RoStock)"
115 #: Cura/gui/configWizard.py:367
116 msgid "Select your machine"
119 #: Cura/gui/configWizard.py:368
120 msgid "What kind of machine do you have:"
123 #: Cura/gui/configWizard.py:377
124 msgid "Other (Ex: RepRap, MakerBot)"
125 msgstr "其他机型(如MostFun Sail)"
127 #: Cura/gui/configWizard.py:380
129 "The collection of anonymous usage information helps with the continued "
130 "improvement of Cura."
133 #: Cura/gui/configWizard.py:381
135 "This does NOT submit your models online nor gathers any privacy related "
139 #: Cura/gui/configWizard.py:382
140 msgid "Submit anonymous usage information:"
143 #: Cura/gui/configWizard.py:383
144 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
147 #: Cura/gui/configWizard.py:455
148 msgid "Select upgraded parts you have"
151 #: Cura/gui/configWizard.py:456
153 "To assist you in having better default settings for your Ultimaker\n"
154 "Cura would like to know which upgrades you have in your machine."
157 #: Cura/gui/configWizard.py:458
158 msgid "Extruder drive upgrade"
161 #: Cura/gui/configWizard.py:459
162 msgid "Heated printer bed (kit)"
165 #: Cura/gui/configWizard.py:460
166 msgid "Heated printer bed (self built)"
169 #: Cura/gui/configWizard.py:461
170 msgid "Dual extrusion (experimental)"
173 #: Cura/gui/configWizard.py:463
175 "If you have an Ultimaker bought after october 2012 you will have the\n"
176 "Extruder drive upgrade. If you do not have this upgrade,\n"
177 "it is highly recommended to improve reliability."
180 #: Cura/gui/configWizard.py:464
182 "This upgrade can be bought from the Ultimaker webshop\n"
183 "or found on thingiverse as thing:26094"
186 #: Cura/gui/configWizard.py:486
187 msgid "Upgrade Ultimaker Firmware"
190 #: Cura/gui/configWizard.py:487
192 "Firmware is the piece of software running directly on your 3D printer.\n"
193 "This firmware controls the step motors, regulates the temperature\n"
194 "and ultimately makes your printer work."
197 #: Cura/gui/configWizard.py:489
199 "The firmware shipping with new Ultimakers works, but upgrades\n"
200 "have been made to make better prints, and make calibration easier."
203 #: Cura/gui/configWizard.py:491
205 "Cura requires these new features and thus\n"
206 "your firmware will most likely need to be upgraded.\n"
207 "You will get the chance to do so now."
210 #: Cura/gui/configWizard.py:496
211 msgid "Do not upgrade to this firmware if:"
214 #: Cura/gui/configWizard.py:497
215 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
218 #: Cura/gui/configWizard.py:498
219 msgid "* Have other changes in the firmware"
222 #: Cura/gui/configWizard.py:532
224 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"
225 "You can skip these if you know your machine is functional."
228 #: Cura/gui/configWizard.py:533
232 #: Cura/gui/configWizard.py:533
236 #: Cura/gui/configWizard.py:537
237 msgid "Communication:"
240 #: Cura/gui/configWizard.py:538
244 #: Cura/gui/configWizard.py:539
248 #: Cura/gui/configWizard.py:544
249 msgid "Show error log"
252 #: Cura/gui/configWizard.py:578
253 msgid "Connecting to machine."
256 #: Cura/gui/configWizard.py:599
257 msgid "Cooldown before temperature check."
260 #: Cura/gui/configWizard.py:605 Cura/gui/configWizard.py:612
261 msgid "Checking the heater and temperature sensor."
264 #: Cura/gui/configWizard.py:623
265 msgid "Please make sure none of the endstops are pressed."
268 #: Cura/gui/configWizard.py:636
269 msgid "Temperature measurement FAILED!"
272 #: Cura/gui/configWizard.py:641
274 msgid "Head temperature: %d"
277 #: Cura/gui/configWizard.py:648 Cura/gui/configWizard.py:657
279 msgid "Communication State: %s"
282 #: Cura/gui/configWizard.py:651
283 msgid "Failed to establish connection with the printer."
286 #: Cura/gui/configWizard.py:696
287 msgid "Please press the right X endstop."
290 #: Cura/gui/configWizard.py:701
291 msgid "Please press the left X endstop."
294 #: Cura/gui/configWizard.py:706
295 msgid "Please press the front Y endstop."
298 #: Cura/gui/configWizard.py:711
299 msgid "Please press the back Y endstop."
302 #: Cura/gui/configWizard.py:716
303 msgid "Please press the top Z endstop."
306 #: Cura/gui/configWizard.py:721
307 msgid "Please press the bottom Z endstop."
310 #: Cura/gui/configWizard.py:727
311 msgid "Checkup finished"
314 #: Cura/gui/configWizard.py:770
315 msgid "Calibrating the Steps Per E requires some manual actions."
318 #: Cura/gui/configWizard.py:771
319 msgid "First remove any filament from your machine."
322 #: Cura/gui/configWizard.py:772
324 "Next put in your filament so the tip is aligned with the\n"
325 "top of the extruder drive."
328 #: Cura/gui/configWizard.py:773
329 msgid "We'll push the filament 100mm"
332 #: Cura/gui/configWizard.py:774
333 msgid "Extrude 100mm filament"
336 #: Cura/gui/configWizard.py:775
338 "Now measure the amount of extruded filament:\n"
339 "(this can be more or less then 100mm)"
342 #: Cura/gui/configWizard.py:776
346 #: Cura/gui/configWizard.py:777
347 msgid "This results in the following steps per E:"
350 #: Cura/gui/configWizard.py:779
351 msgid "You can repeat these steps to get better calibration."
354 #: Cura/gui/configWizard.py:782
356 "If you still have filament in your printer which needs\n"
357 "heat to remove, press the heat up button below:"
360 #: Cura/gui/configWizard.py:783
361 msgid "Heatup for filament removal"
364 #: Cura/gui/configWizard.py:808 Cura/gui/configWizard.py:842
366 "Error: Failed to open serial port to machine\n"
367 "If this keeps happening, try disconnecting and reconnecting the USB cable"
370 #: Cura/gui/firmwareInstall.py:44
372 "I am sorry, but Cura does not ship with a default firmware for your machine "
376 #: Cura/gui/firmwareInstall.py:44 Cura/gui/firmwareInstall.py:48
377 #: Cura/gui/firmwareInstall.py:103 Cura/gui/mainWindow.py:508
378 msgid "Firmware update"
381 #: Cura/gui/firmwareInstall.py:48
383 "Cura only supports firmware updates for ATMega2560 based hardware.\n"
384 "So updating your RepRap with Cura might or might not work."
386 "Cura仅支持基于ATmega2560的机型升级\n"
387 "升级固件后也许大概有可能你的打印机无法正常工作"
389 #: Cura/gui/firmwareInstall.py:56
393 #: Cura/gui/firmwareInstall.py:77
394 msgid "Reading firmware..."
397 #: Cura/gui/firmwareInstall.py:79
398 msgid "Connecting to machine..."
401 #: Cura/gui/firmwareInstall.py:83
403 "Please connect the printer to\n"
404 "your computer with the USB cable."
407 #: Cura/gui/firmwareInstall.py:102
409 "Failed to find machine for firmware upgrade\n"
410 "Is your machine connected to the PC?"
413 #: Cura/gui/firmwareInstall.py:107
414 msgid "Uploading firmware..."
417 #: Cura/gui/firmwareInstall.py:110
421 "Installed firmware: %s"
426 #: Cura/gui/firmwareInstall.py:112
427 msgid "Failed to write firmware.\n"
430 #: Cura/gui/mainWindow.py:66
431 msgid "Load model file...\tCTRL+L"
432 msgstr "读取模型文件...\tCTRL+L"
434 #: Cura/gui/mainWindow.py:68
435 msgid "Save model...\tCTRL+S"
436 msgstr "保存模型...\tCTRL+S"
438 #: Cura/gui/mainWindow.py:70
439 msgid "Reload platform\tF5"
442 #: Cura/gui/mainWindow.py:72
443 msgid "Clear platform"
446 #: Cura/gui/mainWindow.py:76
447 msgid "Print...\tCTRL+P"
448 msgstr "打印...\tCTRL+P"
450 #: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279
451 msgid "Save GCode..."
454 #: Cura/gui/mainWindow.py:80
455 msgid "Show slice engine log..."
458 #: Cura/gui/mainWindow.py:84
459 msgid "Open Profile..."
462 #: Cura/gui/mainWindow.py:87
463 msgid "Save Profile..."
466 #: Cura/gui/mainWindow.py:90
467 msgid "Load Profile from GCode..."
468 msgstr "从Gcode中读取配置文件..."
470 #: Cura/gui/mainWindow.py:94
471 msgid "Reset Profile to default"
474 #: Cura/gui/mainWindow.py:99
475 msgid "Preferences...\tCTRL+,"
476 msgstr "偏好配置......\tCTRL+,"
478 #: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434
479 msgid "Machine settings..."
482 #: Cura/gui/mainWindow.py:107
483 msgid "Recent Model Files"
486 #: Cura/gui/mainWindow.py:114
487 msgid "Recent Profile Files"
490 #: Cura/gui/mainWindow.py:120
494 #: Cura/gui/mainWindow.py:122
498 #: Cura/gui/mainWindow.py:130
499 msgid "Minecraft map import..."
500 msgstr "导入Minecraft地图..."
502 #: Cura/gui/mainWindow.py:134
503 msgid "PID Debugger..."
506 #: Cura/gui/mainWindow.py:137
507 msgid "Copy profile to clipboard"
510 #: Cura/gui/mainWindow.py:141
511 msgid "Print all at once"
514 #: Cura/gui/mainWindow.py:143
515 msgid "Print one at a time"
518 #: Cura/gui/mainWindow.py:150
522 #: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175
526 #: Cura/gui/mainWindow.py:159
527 msgid "Switch to quickprint..."
528 msgstr "切换到快速打印模式..."
530 #: Cura/gui/mainWindow.py:163
531 msgid "Switch to full settings..."
532 msgstr "切换到完整配置模式..."
534 #: Cura/gui/mainWindow.py:168
535 msgid "Open expert settings...\tCTRL+E"
536 msgstr "额外设置...\tCTRL+E"
538 #: Cura/gui/mainWindow.py:172
539 msgid "Run first run wizard..."
542 #: Cura/gui/mainWindow.py:174
543 msgid "Run bed leveling wizard..."
546 #: Cura/gui/mainWindow.py:176
547 msgid "Run head offset wizard..."
548 msgstr "运行多喷头校正向导..."
550 #: Cura/gui/mainWindow.py:179
554 #: Cura/gui/mainWindow.py:182
555 msgid "Online documentation..."
558 #: Cura/gui/mainWindow.py:184
559 msgid "Report a problem..."
562 #: Cura/gui/mainWindow.py:186
563 msgid "Check for update..."
566 #: Cura/gui/mainWindow.py:188
567 msgid "Open YouMagine website..."
568 msgstr "打开YouMagine网站..."
570 #: Cura/gui/mainWindow.py:190
571 msgid "About Cura..."
574 #: Cura/gui/mainWindow.py:192
578 #: Cura/gui/mainWindow.py:343
580 "For \"One at a time\" printing, you need to have entered the correct head "
581 "size and gantry height in the machine settings"
584 #: Cura/gui/mainWindow.py:343
585 msgid "One at a time warning"
588 #: Cura/gui/mainWindow.py:440
589 msgid "Install default firmware..."
592 #: Cura/gui/mainWindow.py:443
593 msgid "Install custom firmware..."
596 #: Cura/gui/mainWindow.py:447
597 msgid "Select profile file to load"
600 #: Cura/gui/mainWindow.py:459
601 msgid "Select gcode file to load profile from"
604 #: Cura/gui/mainWindow.py:474
606 "No profile found in GCode file.\n"
607 "This feature only works with GCode files made by Cura 12.07 or newer."
610 #: Cura/gui/mainWindow.py:474
611 msgid "Profile load error"
614 #: Cura/gui/mainWindow.py:478
615 msgid "Select profile file to save"
618 #: Cura/gui/mainWindow.py:488
620 "This will reset all profile settings to defaults.\n"
621 "Unless you have saved your current profile, all settings will be lost!\n"
622 "Do you really want to reset?"
625 #: Cura/gui/mainWindow.py:488
626 msgid "Profile reset"
629 #: Cura/gui/mainWindow.py:508
631 "Warning: Installing a custom firmware does not guarantee that you machine "
632 "will function correctly, and could damage your machine."
635 #: Cura/gui/mainWindow.py:509
636 msgid "Open firmware to upload"
639 #: Cura/gui/mainWindow.py:569
640 msgid "You are running the latest version of Cura!"
641 msgstr "你正在运行最新版本的的Cura!"
643 #: Cura/gui/mainWindow.py:569
647 #: Cura/gui/mainWindow.py:624
651 #: Cura/gui/pluginPanel.py:27
655 #: Cura/gui/pluginPanel.py:31
656 msgid "Open plugin location"
659 #: Cura/gui/pluginPanel.py:32
660 msgid "Enabled plugins"
663 #: Cura/gui/pluginPanel.py:134
664 msgid "You need to select a plugin before you can add anything."
667 #: Cura/gui/pluginPanel.py:134
668 msgid "Error: no plugin selected"
671 #: Cura/gui/preferencesDialog.py:28
675 #: Cura/gui/preferencesDialog.py:31
679 #: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478
683 #: Cura/gui/preferencesDialog.py:40
684 msgid "Filament settings"
687 #: Cura/gui/preferencesDialog.py:50
688 msgid "Cura settings"
691 #: Cura/gui/preferencesDialog.py:84
692 msgid "Machine settings"
695 #: Cura/gui/preferencesDialog.py:95
696 msgid "Printer head size"
699 #: Cura/gui/preferencesDialog.py:103
704 #: Cura/gui/preferencesDialog.py:107
705 msgid "Communication settings"
708 #: Cura/gui/preferencesDialog.py:154
709 msgid "Cannot remove the last machine configuration in Cura"
712 #: Cura/gui/preferencesDialog.py:154
713 msgid "Machine remove error"
716 #: Cura/gui/preferencesDialog.py:168
717 msgid "Enter the new name:"
720 #: Cura/gui/preferencesDialog.py:168
721 msgid "Change machine name"
724 #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312
726 msgid "Printing on %s"
729 #: Cura/gui/printWindow.py:324
731 "Your computer is running on battery power.\n"
732 "Connect your computer to AC power or your print might not finish."
735 #: Cura/gui/printWindow.py:334
737 "InfoLine from printer connection\n"
738 "InfoLine from dialog\n"
740 "More lines for layout\n"
741 "More lines for layout\n"
742 "More lines for layout"
745 #: Cura/gui/printWindow.py:336
749 #: Cura/gui/printWindow.py:338 Cura/gui/sceneView.py:65
753 #: Cura/gui/printWindow.py:339
757 #: Cura/gui/printWindow.py:340
761 #: Cura/gui/printWindow.py:341
765 #: Cura/gui/sceneView.py:64
769 #: Cura/gui/sceneView.py:69
773 #: Cura/gui/sceneView.py:70
777 #: Cura/gui/sceneView.py:71
781 #: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
785 #: Cura/gui/sceneView.py:74
789 #: Cura/gui/sceneView.py:77
793 #: Cura/gui/sceneView.py:79
797 #: Cura/gui/sceneView.py:80
801 #: Cura/gui/sceneView.py:81
805 #: Cura/gui/sceneView.py:89
809 #: Cura/gui/sceneView.py:91
813 #: Cura/gui/sceneView.py:93
817 #: Cura/gui/sceneView.py:95
821 #: Cura/gui/sceneView.py:97
825 #: Cura/gui/sceneView.py:99
829 #: Cura/gui/sceneView.py:101
830 msgid "Uniform scale"
833 #: Cura/gui/sceneView.py:104
837 #: Cura/gui/sceneView.py:104
841 #: Cura/gui/sceneView.py:104
845 #: Cura/gui/sceneView.py:104
849 #: Cura/gui/sceneView.py:104
853 #: Cura/gui/sceneView.py:104
857 #: Cura/gui/sceneView.py:106
858 msgid "Share on YouMagine"
861 #: Cura/gui/sceneView.py:204
862 msgid "Open 3D model"
865 #: Cura/gui/sceneView.py:229
866 msgid "Save 3D model"
869 #: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914
871 msgid "Print with %s"
874 #: Cura/gui/sceneView.py:280
875 msgid "Slice engine log..."
878 #: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917
879 msgid "Save toolpath"
882 #: Cura/gui/sceneView.py:351
883 msgid "The slicing engine reported the following"
886 #: Cura/gui/sceneView.py:351
887 msgid "Engine log..."
890 #: Cura/gui/sceneView.py:490
891 msgid "How many copies do you want?"
894 #: Cura/gui/sceneView.py:490
895 msgid "Number of copies"
898 #: Cura/gui/sceneView.py:490
902 #: Cura/gui/sceneView.py:780
903 msgid "Center on platform"
906 #: Cura/gui/sceneView.py:781
907 msgid "Delete object"
910 #: Cura/gui/sceneView.py:782
911 msgid "Multiply object"
914 #: Cura/gui/sceneView.py:783
915 msgid "Split object into parts"
918 #: Cura/gui/sceneView.py:785
919 msgid "Dual extrusion merge"
922 #: Cura/gui/sceneView.py:787
923 msgid "Delete all objects"
926 #: Cura/gui/sceneView.py:788
927 msgid "Reload all objects"
930 #: Cura/gui/sceneView.py:911
931 msgid "Toolpath to SD"
934 #: Cura/gui/sceneView.py:1205
935 msgid "Overhang view not working due to lack of OpenGL shaders support."
938 #: Cura/gui/simpleMode.py:19
939 msgid "High quality print"
942 #: Cura/gui/simpleMode.py:20
943 msgid "Normal quality print"
946 #: Cura/gui/simpleMode.py:21
947 msgid "Fast low quality print"
950 #: Cura/gui/simpleMode.py:22
951 msgid "Thin walled cup or vase"
954 #: Cura/gui/simpleMode.py:32
955 msgid "Print support structure"
958 #: Cura/gui/simpleMode.py:37
959 msgid "Select a quickprint profile:"
962 #: Cura/gui/simpleMode.py:47
966 #: Cura/gui/simpleMode.py:51
970 #: Cura/gui/simpleMode.py:57
974 #: Cura/gui/simpleMode.py:85
975 msgid "Exterior Only"
978 #: Cura/gui/tools/imageToMesh.py:28
982 #: Cura/gui/tools/imageToMesh.py:32
986 #: Cura/gui/tools/imageToMesh.py:36
990 #: Cura/gui/tools/imageToMesh.py:40
994 #: Cura/gui/tools/projector.py:42
998 #: Cura/gui/tools/projector.py:43
1002 #: Cura/gui/tools/projector.py:44
1006 #: Cura/gui/tools/projector.py:45
1010 #: Cura/gui/tools/youmagineGui.py:78
1011 msgid "Checking token"
1014 #: Cura/gui/tools/youmagineGui.py:82
1015 msgid "Failed to contact YouMagine.com"
1018 #: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
1019 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
1020 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
1021 msgid "YouMagine error."
1024 #: Cura/gui/tools/youmagineGui.py:100
1025 msgid "Cura is now authorized to share on YouMagine"
1028 #: Cura/gui/tools/youmagineGui.py:100
1032 #: Cura/gui/tools/youmagineGui.py:112
1033 msgid "Creating new design on YouMagine..."
1036 #: Cura/gui/tools/youmagineGui.py:116
1037 msgid "Failed to create a design, nothing uploaded!"
1040 #: Cura/gui/tools/youmagineGui.py:120
1042 msgid "Building model %s..."
1045 #: Cura/gui/tools/youmagineGui.py:131
1047 msgid "Uploading model %s..."
1050 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
1051 #: Cura/gui/tools/youmagineGui.py:148
1053 msgid "Failed to upload %s!"
1056 #: Cura/gui/tools/youmagineGui.py:137
1058 msgid "Uploading file %s..."
1061 #: Cura/gui/tools/youmagineGui.py:145
1063 msgid "Uploading image %s..."
1066 #: Cura/gui/tools/youmagineGui.py:153
1067 msgid "Failed to upload snapshot!"
1070 #: Cura/gui/tools/youmagineGui.py:158
1071 msgid "Publishing design..."
1074 #: Cura/gui/tools/youmagineGui.py:230
1075 msgid "Request authorization from YouMagine"
1078 #: Cura/gui/tools/youmagineGui.py:231
1079 msgid "Paste token here"
1082 #: Cura/gui/tools/youmagineGui.py:237
1084 "To share your designs on YouMagine\n"
1085 "you need an account on YouMagine.com\n"
1086 "and authorize Cura to access your account."
1089 #: Cura/gui/tools/youmagineGui.py:239
1091 "This will open a browser window where you can\n"
1092 "authorize Cura to access your YouMagine account.\n"
1093 "You can revoke access at any time\n"
1094 "from YouMagine.com"
1097 #: Cura/gui/tools/youmagineGui.py:274
1101 #: Cura/gui/tools/youmagineGui.py:278
1102 msgid "Publish after upload"
1105 #: Cura/gui/tools/youmagineGui.py:279
1109 #: Cura/gui/tools/youmagineGui.py:287
1113 #: Cura/gui/tools/youmagineGui.py:289
1117 #: Cura/gui/tools/youmagineGui.py:299
1119 "Directly publish the design after uploading.\n"
1120 "Without this check the design will not be public\n"
1121 "until you publish it yourself on YouMagine.com"
1124 #: Cura/gui/tools/youmagineGui.py:305
1125 msgid "Design name:"
1128 #: Cura/gui/tools/youmagineGui.py:307
1129 msgid "Description:"
1132 #: Cura/gui/tools/youmagineGui.py:309
1136 #: Cura/gui/tools/youmagineGui.py:311
1140 #: Cura/gui/tools/youmagineGui.py:314
1144 #: Cura/gui/tools/youmagineGui.py:317
1145 msgid "Related design files:"
1148 #: Cura/gui/tools/youmagineGui.py:340
1149 msgid "The name cannot be empty"
1152 #: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
1153 msgid "New design error."
1156 #: Cura/gui/tools/youmagineGui.py:344
1157 msgid "The description cannot be empty"
1160 #: Cura/gui/tools/youmagineGui.py:370
1161 msgid "No webcam found on your system"
1164 #: Cura/gui/tools/youmagineGui.py:370
1165 msgid "Webcam error"
1168 #: Cura/gui/util/engineResultView.py:168
1170 msgid "Loading toolpath for visualization (%d%%)"
1173 #: Cura/gui/util/openglGui.py:242
1174 msgid "An error has occurred during the 3D view drawing."
1177 #: Cura/gui/util/openglGui.py:250
1178 msgid "3D window error"
1181 #: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172
1182 #: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202
1183 #: Cura/util/profile.py:204
1187 #: Cura/util/profile.py:170
1188 msgid "Layer height (mm)"
1191 #: Cura/util/profile.py:170
1193 "Layer height in millimeters.\n"
1194 "This is the most important setting to determine the quality of your print. "
1195 "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
1196 "0.25mm with an Ultimaker for very fast prints at low quality."
1200 "普通质量可设置为0.2mm,高质量设为0.1mm。\n"
1203 #: Cura/util/profile.py:171
1204 msgid "Shell thickness (mm)"
1207 #: Cura/util/profile.py:171
1209 "Thickness of the outside shell in the horizontal direction.\n"
1210 "This is used in combination with the nozzle size to define the number\n"
1211 "of perimeter lines and the thickness of those perimeter lines."
1214 "通常需要结合你的喷嘴孔径设置成相应倍数,这个参数决定了边缘的走线次数和厚度"
1216 #: Cura/util/profile.py:172
1217 msgid "Enable retraction"
1220 #: Cura/util/profile.py:172
1222 "Retract the filament when the nozzle is moving over a none-printed area. "
1223 "Details about the retraction can be configured in the advanced tab."
1225 "当在非打印区域移动喷头时,适当的回退丝能避免多余的挤出和拉丝\n"
1228 #: Cura/util/profile.py:173 Cura/util/profile.py:174
1232 #: Cura/util/profile.py:173
1233 msgid "Bottom/Top thickness (mm)"
1234 msgstr "底层/顶层厚度(mm)"
1236 #: Cura/util/profile.py:173
1238 "This controls the thickness of the bottom and top layers, the amount of "
1239 "solid layers put down is calculated by the layer thickness and this value.\n"
1240 "Having this value a multiple of the layer thickness makes sense. And keep it "
1241 "near your wall thickness to make an evenly strong part."
1243 "这个参数控制底层和顶层的厚度,通过层厚和这个参数计算需打印出的实心层的数量\n"
1244 "这个数值应是层厚的倍数。让这个参数接近你的壁厚,可以让模型强度更均匀"
1246 #: Cura/util/profile.py:174
1247 msgid "Fill Density (%)"
1250 #: Cura/util/profile.py:174
1252 "This controls how densely filled the insides of your print will be. For a "
1253 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "
1255 "This won't affect the outside of the print and only adjusts how strong the "
1259 "打印实心物体需设置为100%,空心物体设置为0%。通常使用20%填充率\n"
1260 "这个参数不会影响物体的外观,它一般用来调整物体的强度"
1262 #: Cura/util/profile.py:175
1264 "The nozzle size is very important, this is used to calculate the line width "
1265 "of the infill, and used to calculate the amount of outside wall lines and "
1266 "thickness for the wall thickness you entered in the print settings."
1267 msgstr "喷嘴尺寸是相当重要的,它会被用于计算走线宽度、外壁走线次数和厚度"
1269 #: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
1270 #: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181
1271 msgid "Speed and Temperature"
1274 #: Cura/util/profile.py:176
1275 msgid "Print speed (mm/s)"
1278 #: Cura/util/profile.py:176
1280 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
1281 "s, but for good quality prints you want to print slower. Printing speed "
1282 "depends on a lot of factors. So you will be experimenting with optimal "
1283 "settings for this."
1286 "MostFun打印速度最快可达150mm/s,为获得更好的打印质量,我们建议打印速度设为"
1288 "打印速度的设置要参考很多因素,你可以根据实际情况调试修改"
1290 #: Cura/util/profile.py:177
1291 msgid "Printing temperature (C)"
1294 #: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179
1295 #: Cura/util/profile.py:180
1297 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"
1298 "For PLA a value of 210C is usually used.\n"
1299 "For ABS a value of 230C or higher is required."
1305 #: Cura/util/profile.py:178
1306 msgid "2nd nozzle temperature (C)"
1309 #: Cura/util/profile.py:179
1310 msgid "3th nozzle temperature (C)"
1313 #: Cura/util/profile.py:180
1314 msgid "4th nozzle temperature (C)"
1317 #: Cura/util/profile.py:181
1318 msgid "Bed temperature (C)"
1321 #: Cura/util/profile.py:181
1323 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
1326 #: Cura/util/profile.py:182 Cura/util/profile.py:183
1330 #: Cura/util/profile.py:182
1331 msgid "Touching buildplate"
1334 #: Cura/util/profile.py:182
1338 #: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184
1339 #: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226
1340 #: Cura/util/profile.py:227 Cura/util/profile.py:228
1344 #: Cura/util/profile.py:182
1345 msgid "Support type"
1348 #: Cura/util/profile.py:182
1350 "Type of support structure build.\n"
1351 "\"Touching buildplate\" is the most commonly used support setting.\n"
1353 "None does not do any support.\n"
1354 "Touching buildplate only creates support where the support structure will "
1355 "touch the build platform.\n"
1356 "Everywhere creates support even on top of parts of the model."
1359 "通常使用\"Touching buildplate\"建立支撑 \n"
1361 "选择Touching buildplate 仅会生成接触到打印平台的支撑结构\n"
1362 "选择 Everywhere 会在模型上所有的悬空位置创建支撑结构"
1364 #: Cura/util/profile.py:183 Cura/util/profile.py:232
1368 #: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234
1369 #: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237
1370 #: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240
1374 #: Cura/util/profile.py:183
1375 msgid "Platform adhesion type"
1378 #: Cura/util/profile.py:183
1380 "Different options that help in preventing corners from lifting due to "
1382 "Brim adds a single layer thick flat area around your object which is easy to "
1383 "cut off afterwards, and it is the recommended option.\n"
1384 "Raft adds a thick raster below the object and a thin interface between this "
1385 "and your object.\n"
1386 "(Note that enabling the brim or raft disables the skirt)"
1389 "Brim会在模型底边周围增加数圈薄层,推荐使用这个选项\n"
1390 "Raft会打印模型前打印一个网状底座\n"
1391 "(注意:开启粘附平台后,会关闭打印开始前的边缘走线功能)"
1393 #: Cura/util/profile.py:184
1397 #: Cura/util/profile.py:184
1398 msgid "First extruder"
1401 #: Cura/util/profile.py:184
1402 msgid "Second extruder"
1405 #: Cura/util/profile.py:184
1406 msgid "Support dual extrusion"
1409 #: Cura/util/profile.py:184
1411 "Which extruder to use for support material, for break-away support you can "
1412 "use both extruders.\n"
1413 "But if one of the materials is more expensive then the other you could "
1414 "select an extruder to use for support material. This causes more extruder "
1416 "You can also use the 2nd extruder for soluble support materials."
1419 #: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
1420 msgid "Dual extrusion"
1423 #: Cura/util/profile.py:185
1424 msgid "Wipe&prime tower"
1427 #: Cura/util/profile.py:185
1429 "The wipe-tower is a tower printed on every layer when switching between "
1431 "The old nozzle is wiped off on the tower before the new nozzle is used to "
1432 "print the 2nd color."
1435 #: Cura/util/profile.py:186
1436 msgid "Wipe&prime tower volume per layer (mm3)"
1439 #: Cura/util/profile.py:186
1441 "The amount of material put in the wipe/prime tower.\n"
1442 "This is done in volume because in general you want to extrude a\n"
1443 "certain amount of volume to get the extruder going, independent on the layer "
1445 "This means that with thinner layers, your tower gets bigger."
1448 #: Cura/util/profile.py:187
1452 #: Cura/util/profile.py:187
1454 "The ooze shield is a 1 line thick shell around the object which stands a few "
1455 "mm from the object.\n"
1456 "This shield catches any oozing from the unused nozzle in dual-extrusion."
1459 #: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190
1460 #: Cura/util/profile.py:191 Cura/util/profile.py:192
1464 #: Cura/util/profile.py:188
1465 msgid "Diameter (mm)"
1468 #: Cura/util/profile.py:188
1470 "Diameter of your filament, as accurately as possible.\n"
1471 "If you cannot measure this value you will have to calibrate it, a higher "
1472 "number means less extrusion, a smaller number generates more extrusion."
1475 "MostFun Sail使用的耗材的直径为1.75mm"
1477 #: Cura/util/profile.py:189
1478 msgid "Diameter2 (mm)"
1481 #: Cura/util/profile.py:189
1483 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
1487 #: Cura/util/profile.py:190
1488 msgid "Diameter3 (mm)"
1491 #: Cura/util/profile.py:190
1493 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
1497 #: Cura/util/profile.py:191
1498 msgid "Diameter4 (mm)"
1501 #: Cura/util/profile.py:191
1503 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
1507 #: Cura/util/profile.py:192
1511 #: Cura/util/profile.py:192
1513 "Flow compensation, the amount of material extruded is multiplied by this "
1515 msgstr "流量补偿,最终挤出量是设定的挤出量乘以这个值"
1517 #: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
1518 #: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
1519 #: Cura/util/profile.py:199
1523 #: Cura/util/profile.py:193
1524 msgid "Speed (mm/s)"
1527 #: Cura/util/profile.py:193
1529 "Speed at which the filament is retracted, a higher retraction speed works "
1530 "better. But a very high retraction speed can lead to filament grinding."
1533 "设定较高的速度能达到较好的效果。但是过高的速度可能会导致丝的磨损"
1535 #: Cura/util/profile.py:194
1536 msgid "Distance (mm)"
1539 #: Cura/util/profile.py:194
1541 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
1542 "seems to generate good results."
1545 "设置为0时不会回退,在MostFun Sail设置为3mm时效果比较好"
1547 #: Cura/util/profile.py:195
1548 msgid "Dual extrusion switch amount (mm)"
1551 #: Cura/util/profile.py:195
1553 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
1554 "no retraction at all. A value of 16.0mm seems to generate good results."
1557 #: Cura/util/profile.py:196
1558 msgid "Minimum travel (mm)"
1561 #: Cura/util/profile.py:196
1563 "Minimum amount of travel needed for a retraction to happen at all. To make "
1564 "sure you do not get a lot of retractions in a small area."
1567 #: Cura/util/profile.py:197
1568 msgid "Enable combing"
1571 #: Cura/util/profile.py:197
1573 "Combing is the act of avoiding holes in the print for the head to travel "
1574 "over. If combing is disabled the printer head moves straight from the start "
1575 "point to the end point and it will always retract."
1577 "梳理功能可以避免喷头移动后产生的孔\n"
1578 "如果关闭了该功能,打印头会在移动过程中一直处在回退状态"
1580 #: Cura/util/profile.py:198
1581 msgid "Minimal extrusion before retracting (mm)"
1582 msgstr "回退前最小挤出量(mm)"
1584 #: Cura/util/profile.py:198
1586 "The minimal amount of extrusion that needs to be done before retracting "
1587 "again if a retraction needs to happen before this minimal is reached the "
1588 "retraction is ignored.\n"
1589 "This avoids retracting a lot on the same piece of filament which flattens "
1590 "the filament and causes grinding issues."
1593 #: Cura/util/profile.py:199
1594 msgid "Z hop when retracting (mm)"
1595 msgstr "回退时Z轴抬起(mm)"
1597 #: Cura/util/profile.py:199
1599 "When a retraction is done, the head is lifted by this amount to travel over "
1600 "the print. A value of 0.075 works well. This feature has a lot of positive "
1601 "effect on delta towers."
1604 #: Cura/util/profile.py:200
1605 msgid "Initial layer thickness (mm)"
1608 #: Cura/util/profile.py:200
1610 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
1611 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
1614 "底层的厚度。较厚的底部能使材料和打印平台粘附得更好。设置为0.0则使用层厚作为初"
1617 #: Cura/util/profile.py:201
1618 msgid "Initial layer line width (%)"
1621 #: Cura/util/profile.py:201
1623 "Extra width factor for the extrusion on the first layer, on some printers "
1624 "it's good to have wider extrusion on the first layer to get better bed "
1628 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时,可以使用这个参"
1631 #: Cura/util/profile.py:202
1632 msgid "Cut off object bottom (mm)"
1635 #: Cura/util/profile.py:202
1637 "Sinks the object into the platform, this can be used for objects that do not "
1638 "have a flat bottom and thus create a too small first layer."
1641 "下沉进平台的部分不会被打印出来。当模型底部不平整或者太大时,可以使用这个参"
1644 #: Cura/util/profile.py:204
1645 msgid "Dual extrusion overlap (mm)"
1648 #: Cura/util/profile.py:204
1650 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
1651 "bonds the different colors together."
1652 msgstr "添加一定的重叠挤出,这样能使两个不同的颜色融合的更好"
1654 #: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207
1655 #: Cura/util/profile.py:208 Cura/util/profile.py:209
1659 #: Cura/util/profile.py:205
1660 msgid "Travel speed (mm/s)"
1661 msgstr "移动速度 (mm/s)"
1663 #: Cura/util/profile.py:205
1665 "Speed at which travel moves are done, a well built Ultimaker can reach "
1666 "speeds of 250mm/s. But some machines might miss steps then."
1669 "此移动速度指非打印状态下的移动速度\n"
1670 "建议不要超过150mm/s,否则可能造成电机丢步"
1672 #: Cura/util/profile.py:206
1673 msgid "Bottom layer speed (mm/s)"
1674 msgstr "底层速度 (mm/s)"
1676 #: Cura/util/profile.py:206
1678 "Print speed for the bottom layer, you want to print the first layer slower "
1679 "so it sticks better to the printer bed."
1682 "这个值通常会设置的很低,这样能使底层和平台粘附的更好"
1684 #: Cura/util/profile.py:207
1685 msgid "Infill speed (mm/s)"
1686 msgstr "填充速度 (mm/s)"
1688 #: Cura/util/profile.py:207
1690 "Speed at which infill parts are printed. If set to 0 then the print speed is "
1691 "used for the infill. Printing the infill faster can greatly reduce printing "
1692 "time, but this can negatively affect print quality."
1695 "当设置为0时,会使用打印速度作为填充速度。高速打印填充能节省很多打印时间,但是"
1698 #: Cura/util/profile.py:208
1699 msgid "Outer shell speed (mm/s)"
1700 msgstr "外壳速度 (mm/s)"
1702 #: Cura/util/profile.py:208
1704 "Speed at which outer shell is printed. If set to 0 then the print speed is "
1705 "used. Printing the outer shell at a lower speed improves the final skin "
1706 "quality. However, having a large difference between the inner shell speed "
1707 "and the outer shell speed will effect quality in a negative way."
1710 "当设置为0时,会使用打印速度作为外壳速度\n"
1711 "使用较低的打印速度可以提高模型打印质量,但是如果外壳和内部的打印速度相差较"
1714 #: Cura/util/profile.py:209
1715 msgid "Inner shell speed (mm/s)"
1716 msgstr "内壁速度 (mm/s)"
1718 #: Cura/util/profile.py:209
1720 "Speed at which inner shells are printed. If set to 0 then the print speed is "
1721 "used. Printing the inner shell faster then the outer shell will reduce "
1722 "printing time. It is good to set this somewhere in between the outer shell "
1723 "speed and the infill/printing speed."
1726 "当设置为0时,会使用打印速度作为内壁速度\n"
1727 "使用较高的打印机速度可以减少模型的打印时间,需要设置好外壳速度、打印速度、填"
1730 #: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216
1731 #: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219
1732 #: Cura/util/profile.py:220
1736 #: Cura/util/profile.py:210
1737 msgid "Minimal layer time (sec)"
1738 msgstr "每层最小打印时间(sec)"
1740 #: Cura/util/profile.py:210
1742 "Minimum time spent in a layer, gives the layer time to cool down before the "
1743 "next layer is put on top. If the layer will be placed down too fast the "
1744 "printer will slow down to make sure it has spent at least this amount of "
1745 "seconds printing this layer."
1748 "在打印下一层前留一定时间让当前层冷却。如果当前层会被很快打印完,那么打印机会"
1751 #: Cura/util/profile.py:211
1752 msgid "Enable cooling fan"
1755 #: Cura/util/profile.py:211
1757 "Enable the cooling fan during the print. The extra cooling from the cooling "
1758 "fan is essential during faster prints."
1761 "在快速打印时开启风扇冷却是很有必要的"
1763 #: Cura/util/profile.py:213
1767 #: Cura/util/profile.py:213
1769 "The skirt is a line drawn around the object at the first layer. This helps "
1770 "to prime your extruder, and to see if the object fits on your platform.\n"
1771 "Setting this to 0 will disable the skirt. Multiple skirt lines can help "
1772 "priming your extruder better for small objects."
1775 #: Cura/util/profile.py:214
1776 msgid "Start distance (mm)"
1779 #: Cura/util/profile.py:214
1781 "The distance between the skirt and the first layer.\n"
1782 "This is the minimal distance, multiple skirt lines will be put outwards from "
1786 #: Cura/util/profile.py:215
1787 msgid "Minimal length (mm)"
1790 #: Cura/util/profile.py:215
1792 "The minimal length of the skirt, if this minimal length is not reached it "
1793 "will add more skirt lines to reach this minimal lenght.\n"
1794 "Note: If the line count is set to 0 this is ignored."
1797 #: Cura/util/profile.py:216
1798 msgid "Fan full on at height (mm)"
1799 msgstr "风扇全速开启高度(mm)"
1801 #: Cura/util/profile.py:216
1803 "The height at which the fan is turned on completely. For the layers below "
1804 "this the fan speed is scaled linearly with the fan off at layer 0."
1807 #: Cura/util/profile.py:217
1808 msgid "Fan speed min (%)"
1811 #: Cura/util/profile.py:217
1813 "When the fan is turned on, it is enabled at this speed setting. If cool "
1814 "slows down the layer, the fan is adjusted between the min and max speed. "
1815 "Minimal fan speed is used if the layer is not slowed down due to cooling."
1818 #: Cura/util/profile.py:218
1819 msgid "Fan speed max (%)"
1822 #: Cura/util/profile.py:218
1824 "When the fan is turned on, it is enabled at this speed setting. If cool "
1825 "slows down the layer, the fan is adjusted between the min and max speed. "
1826 "Maximal fan speed is used if the layer is slowed down due to cooling by more "
1830 #: Cura/util/profile.py:219
1831 msgid "Minimum speed (mm/s)"
1832 msgstr "最小速度 (mm/s)"
1834 #: Cura/util/profile.py:219
1836 "The minimal layer time can cause the print to slow down so much it starts to "
1837 "ooze. The minimal feedrate protects against this. Even if a print gets "
1838 "slowed down it will never be slower than this minimal speed."
1841 #: Cura/util/profile.py:220
1842 msgid "Cool head lift"
1845 #: Cura/util/profile.py:220
1847 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "
1848 "the extra time so the minimal layer time is always hit."
1851 #: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
1855 #: Cura/util/profile.py:221
1856 msgid "Solid infill top"
1859 #: Cura/util/profile.py:221
1861 "Create a solid top surface, if set to false the top is filled with the fill "
1862 "percentage. Useful for cups/vases."
1865 #: Cura/util/profile.py:222
1866 msgid "Solid infill bottom"
1869 #: Cura/util/profile.py:222
1871 "Create a solid bottom surface, if set to false the bottom is filled with the "
1872 "fill percentage. Useful for buildings."
1875 #: Cura/util/profile.py:223
1876 msgid "Infill overlap (%)"
1879 #: Cura/util/profile.py:223
1881 "Amount of overlap between the infill and the walls. There is a slight "
1882 "overlap with the walls and the infill so the walls connect firmly to the "
1886 #: Cura/util/profile.py:224
1887 msgid "Structure type"
1890 #: Cura/util/profile.py:224
1892 "The type of support structure.\n"
1893 "Grid is very strong and can come off in 1 piece, however, sometimes it is "
1895 "Lines are single walled lines that break off one at a time. Which is more "
1896 "work to remove, but as it is less strong it does work better on tricky "
1900 #: Cura/util/profile.py:225
1901 msgid "Overhang angle for support (deg)"
1904 #: Cura/util/profile.py:225
1906 "The minimal angle that overhangs need to have to get support. With 0 degree "
1907 "being horizontal and 90 degree being vertical."
1910 #: Cura/util/profile.py:226
1911 msgid "Fill amount (%)"
1914 #: Cura/util/profile.py:226
1917 "Amount of infill structure in the support material, less material gives "
1918 "weaker support which is easier to remove. 15% seems to be a good average."
1921 #: Cura/util/profile.py:227
1922 msgid "Distance X/Y (mm)"
1925 #: Cura/util/profile.py:227
1927 "Distance of the support material from the print, in the X/Y directions.\n"
1928 "0.7mm gives a nice distance from the print so the support does not stick to "
1932 #: Cura/util/profile.py:228
1933 msgid "Distance Z (mm)"
1936 #: Cura/util/profile.py:228
1938 "Distance from the top/bottom of the support to the print. A small gap here "
1939 "makes it easier to remove the support but makes the print a bit uglier.\n"
1940 "0.15mm gives a good seperation of the support material."
1943 #: Cura/util/profile.py:229
1944 msgid "Spiralize the outer contour"
1947 #: Cura/util/profile.py:229
1949 "Spiralize is smoothing out the Z move of the outer edge. This will create a "
1950 "steady Z increase over the whole print. This feature turns a solid object "
1951 "into a single walled print with a solid bottom.\n"
1952 "This feature used to be called Joris in older versions."
1955 "打印出个表面非常光滑,但会丢失内部填充"
1957 #: Cura/util/profile.py:230
1958 msgid "Only follow mesh surface"
1961 #: Cura/util/profile.py:230
1963 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "
1964 "infill, no top/bottom, nothing."
1965 msgstr "开启后仅打印表面,顶、底、内部填充都会丢失"
1967 #: Cura/util/profile.py:232
1968 msgid "Brim line amount"
1971 #: Cura/util/profile.py:232
1973 "The amount of lines used for a brim, more lines means a larger brim which "
1974 "sticks better, but this also makes your effective print area smaller."
1977 #: Cura/util/profile.py:233
1978 msgid "Extra margin (mm)"
1981 #: Cura/util/profile.py:233
1983 "If the raft is enabled, this is the extra raft area around the object which "
1984 "is also rafted. Increasing this margin will create a stronger raft while "
1985 "using more material and leaving less area for your print."
1988 #: Cura/util/profile.py:234
1989 msgid "Line spacing (mm)"
1992 #: Cura/util/profile.py:234
1994 "When you are using the raft this is the distance between the centerlines of "
1998 #: Cura/util/profile.py:235
1999 msgid "Base thickness (mm)"
2002 #: Cura/util/profile.py:235
2004 "When you are using the raft this is the thickness of the base layer which is "
2008 #: Cura/util/profile.py:236
2009 msgid "Base line width (mm)"
2010 msgstr "基底层走线宽度(mm)"
2012 #: Cura/util/profile.py:236
2014 "When you are using the raft this is the width of the base layer lines which "
2018 #: Cura/util/profile.py:237
2019 msgid "Interface thickness (mm)"
2022 #: Cura/util/profile.py:237
2024 "When you are using the raft this is the thickness of the interface layer "
2025 "which is put down."
2028 #: Cura/util/profile.py:238
2029 msgid "Interface line width (mm)"
2030 msgstr "接触层走线宽度 (mm)"
2032 #: Cura/util/profile.py:238
2034 "When you are using the raft this is the width of the interface layer lines "
2035 "which are put down."
2038 #: Cura/util/profile.py:239
2042 #: Cura/util/profile.py:239
2044 "Gap between the last layer of the raft and the first printing layer. A small "
2045 "gap of 0.2mm works wonders on PLA and makes the raft easy to remove."
2048 "这个间隙能让模型更容易取下,使用PLA建议设为0.2mm"
2050 #: Cura/util/profile.py:240
2051 msgid "Surface layers"
2054 #: Cura/util/profile.py:240
2056 "Amount of surface layers put on top of the raft, these are fully filled "
2057 "layers on which the model is printed."
2060 #: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243
2061 #: Cura/util/profile.py:244
2062 msgid "Fix horrible"
2065 #: Cura/util/profile.py:241
2066 msgid "Combine everything (Type-A)"
2067 msgstr "闭合面片(Type-A)"
2069 #: Cura/util/profile.py:241 Cura/util/profile.py:242
2071 "This expert option adds all parts of the model together. The result is "
2072 "usually that internal cavities disappear. Depending on the model this can be "
2073 "intended or not. Enabling this option is at your own risk. Type-A is "
2074 "dependent on the model normals and tries to keep some internal holes intact. "
2075 "Type-B ignores all internal holes and only keeps the outside shape per layer."
2078 #: Cura/util/profile.py:242
2079 msgid "Combine everything (Type-B)"
2080 msgstr "闭合面片(Type-B)"
2082 #: Cura/util/profile.py:243
2083 msgid "Keep open faces"
2086 #: Cura/util/profile.py:243
2088 "This expert option keeps all the open bits of the model intact. Normally "
2089 "Cura tries to stitch up small holes and remove everything with big holes, "
2090 "but this option keeps bits that are not properly part of anything and just "
2091 "goes with whatever is left. This option is usually not what you want, but it "
2092 "might enable you to slice models otherwise failing to produce proper paths.\n"
2093 "As with all \"Fix horrible\" options, results may vary and use at your own "
2097 #: Cura/util/profile.py:244
2098 msgid "Extensive stitching"
2101 #: Cura/util/profile.py:244
2103 "Extensive stitching tries to fix up open holes in the model by closing the "
2104 "hole with touching polygons. This algorthm is quite expensive and could "
2105 "introduce a lot of processing time.\n"
2106 "As with all \"Fix horrible\" options, results may vary and use at your own "
2110 #: Cura/util/profile.py:470
2111 msgid "Save profile on slice"
2114 #: Cura/util/profile.py:470
2116 "When slicing save the profile as [stl_file]_profile.ini next to the model."
2119 #: Cura/util/profile.py:471
2120 msgid "Cost (price/kg)"
2123 #: Cura/util/profile.py:471
2124 msgid "Cost of your filament per kg, to estimate the cost of the final print."
2127 #: Cura/util/profile.py:472
2128 msgid "Cost (price/m)"
2131 #: Cura/util/profile.py:472
2133 "Cost of your filament per meter, to estimate the cost of the final print."
2136 #: Cura/util/profile.py:473
2137 msgid "Auto detect SD card drive"
2140 #: Cura/util/profile.py:473
2142 "Auto detect the SD card. You can disable this because on some systems "
2143 "external hard-drives or USB sticks are detected as SD card."
2146 #: Cura/util/profile.py:474
2147 msgid "Check for updates"
2150 #: Cura/util/profile.py:474
2151 msgid "Check for newer versions of Cura on startup"
2154 #: Cura/util/profile.py:475
2155 msgid "Send usage statistics"
2158 #: Cura/util/profile.py:475
2159 msgid "Submit anonymous usage information to improve future versions of Cura"
2162 #: Cura/util/profile.py:477
2163 msgid "Density (kg/m3)"
2166 #: Cura/util/profile.py:477
2168 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
2169 "This value is used to estimate the weight if the filament used for the print."
2172 #: Cura/util/profile.py:478
2174 "Change the language in which Cura runs. Switching language requires a "
2178 #: Cura/util/profile.py:481
2179 msgid "Model colour"
2182 #: Cura/util/profile.py:481
2183 msgid "Display color for first extruder"
2186 #: Cura/util/profile.py:482
2187 msgid "Model colour (2)"
2190 #: Cura/util/profile.py:482
2191 msgid "Display color for second extruder"
2194 #: Cura/util/profile.py:483
2195 msgid "Model colour (3)"
2198 #: Cura/util/profile.py:483
2199 msgid "Display color for third extruder"
2202 #: Cura/util/profile.py:484
2203 msgid "Model colour (4)"
2206 #: Cura/util/profile.py:484
2207 msgid "Display color for forth extruder"
2210 #: Cura/util/profile.py:485
2211 msgid "Printing window type"
2214 #: Cura/util/profile.py:485
2215 msgid "Select the interface used for USB printing."
2218 #: Cura/util/profile.py:497
2219 msgid "Maximum width (mm)"
2222 #: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499
2223 msgid "Size of the machine in mm"
2226 #: Cura/util/profile.py:498
2227 msgid "Maximum depth (mm)"
2230 #: Cura/util/profile.py:499
2231 msgid "Maximum height (mm)"
2234 #: Cura/util/profile.py:500
2235 msgid "Machine center 0,0"
2238 #: Cura/util/profile.py:500
2240 "Machines firmware defines the center of the bed as 0,0 instead of the front "
2244 #: Cura/util/profile.py:501
2245 msgid "Build area shape"
2248 #: Cura/util/profile.py:501
2249 msgid "The shape of machine build area."
2252 #: Cura/util/profile.py:503
2254 "If you have an heated bed, this enabled heated bed settings (requires "
2258 #: Cura/util/profile.py:504
2259 msgid "GCode Flavor"
2262 #: Cura/util/profile.py:504
2264 "Flavor of generated GCode.\n"
2265 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
2266 "UltiGCode is a variation of the RepRap GCode which puts more settings in the "
2267 "machine instead of the slicer.\n"
2268 "MakerBot GCode has a few changes in the way GCode is generated, but still "
2269 "requires MakerWare to generate to X3G.\n"
2270 "BFB style generates RPM based code.\n"
2271 "Mach3 uses A,B,C instead of E for extruders."
2274 #: Cura/util/profile.py:505
2275 msgid "Extruder count"
2278 #: Cura/util/profile.py:505
2279 msgid "Amount of extruders in your machine."
2282 #: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510
2286 #: Cura/util/profile.py:506 Cura/util/profile.py:507
2287 msgid "The offset of your secondary extruder compared to the primary."
2290 #: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511
2294 #: Cura/util/profile.py:508 Cura/util/profile.py:509
2295 msgid "The offset of your tertiary extruder compared to the primary."
2298 #: Cura/util/profile.py:510 Cura/util/profile.py:511
2299 msgid "The offset of your forth extruder compared to the primary."
2302 #: Cura/util/profile.py:512
2303 msgid "E-Steps per 1mm filament"
2306 #: Cura/util/profile.py:512
2308 "Amount of steps per mm filament extrusion. If set to 0 then this value is "
2309 "ignored and the value in your firmware is used."
2312 #: Cura/util/profile.py:513
2316 #: Cura/util/profile.py:513
2317 msgid "Serial port to use for communication with the printer"
2320 #: Cura/util/profile.py:515
2324 #: Cura/util/profile.py:515
2326 "Speed of the serial port communication\n"
2327 "Needs to match your firmware settings\n"
2328 "Common values are 250000, 115200, 57600"
2331 #: Cura/util/profile.py:518
2332 msgid "Head size towards X min (mm)"
2335 #: Cura/util/profile.py:518
2337 "The head size when printing multiple objects, measured from the tip of the "
2338 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
2339 "is on the left side."
2342 #: Cura/util/profile.py:519
2343 msgid "Head size towards Y min (mm)"
2346 #: Cura/util/profile.py:519 Cura/util/profile.py:520
2348 "The head size when printing multiple objects, measured from the tip of the "
2349 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
2350 "is on the left side."
2353 #: Cura/util/profile.py:520
2354 msgid "Head size towards X max (mm)"
2357 #: Cura/util/profile.py:521
2358 msgid "Head size towards Y max (mm)"
2361 #: Cura/util/profile.py:521
2363 "The head size when printing multiple objects, measured from the tip of the "
2364 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
2365 "is on the left side."
2368 #: Cura/util/profile.py:522
2369 msgid "Printer gantry height (mm)"
2372 #: Cura/util/profile.py:522
2374 "The height of the gantry holding up the printer head. If an object is higher "
2375 "then this then you cannot print multiple objects one for one. 60mm for an "
2379 #: Cura/util/profile.py:524
2381 msgid "More flow than 150% is rare and usually not recommended."
2384 #: Cura/util/profile.py:525
2386 msgid "Less flow than 50% is rare and usually not recommended."
2389 #: Cura/util/profile.py:526
2392 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
2393 "are not recommended."
2396 #: Cura/util/profile.py:528
2398 "It is highly unlikely that your machine can achieve a printing speed above "
2402 #: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532
2403 #: Cura/util/profile.py:533
2404 msgid "Temperatures above 260C could damage your machine, be careful!"
2407 #: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536
2408 #: Cura/util/profile.py:537
2410 "Are you sure your filament is that thick? Normal filament is around 3mm or "
2414 #: Cura/util/profile.py:538
2416 "It is highly unlikely that your machine can achieve a travel speed above "
2420 #: Cura/util/profile.py:539
2423 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
2424 "results and is not recommended."