1 dgit (1.1~~) unstable; urgency=low
3 * Fix Vcs-Git and Vcs-Browse to refer to chiark. (The dgit-repos on
4 alioth aren't suitable right now because the master there can
5 currently only be updated with an actual upload, ie dgit push.)
6 * Fix some manpage typos. [ Richard Hartmann ]
7 * Manpage said that --clean=check was -wn but that is --clean=none;
8 correctly document that --clean=check is actually -wc.
9 * Document that up to -DDD (not just -DD) is meaningfully different.
10 * Document that -cname=value applies only for this run.
11 * Improve manpage comment about defining a new distro.
12 * Document that --quilt=linear is the default for Debian.
13 * Fix a formatting problem in --build-products-dir= doc.
14 * In manpage, do not seem to imply that NMU should be of only one
16 * Qualify to Debian the manpage comment about how to do NMU.
17 * In discussion on how to start using dgit when already using git, do
18 not imply/assume that existing git history will have identical trees
20 * Remove stray sentence in config section of manpage.
21 * Manpage: Clarify wording of readonly config.
22 * Manpage: Better cross-references for -k and keyid.
23 * dgit(7): No longer say that dgit-repos lives on Alioth.
24 * Infrastructure: Get mirroring right for fresh repos of existing
26 * --new is needed for read access to packages in NEW, too. Document
27 this, and make it work properly.
28 * Work around #793471 (madness with $SIG{__WARN__} and Perl's system
29 builtin): move $SIG{} setting into setup_sigwarn in Dgit.pm, and
31 * Make warnings fatal in dpkg-repos-admin-debian, dgit-ssh-dispatch
32 (using setup_sigwarn).
33 * Make warnings fatal in tstunt/dpkg-parsechangelog (directly).
34 * When source package contains things called .git (even files, and even
35 in subdirectories), remove them. Closes:#793671.
36 * Introduce more sophisticated protocol negotiation for rpush.
37 * Do not quote `:' in shellquote.
38 * Test suite: Honour DGIT_TEST_DEBUG=''.
39 * Print a supplementary message when push fails, giving advice to
40 the user about how to retry. Closes:#793144.
41 * Honour dgit-distros.DISTRO.cmd-CMD and .opts-CMD. Closes:#793427.
42 * Slurp in entire git config, for better performance.
43 * With -DDDD, print out all gitcfg references (copious!)
44 * Fix a debug message in the obsolete sshpsql archive access driver.
45 * Make configuration able to prevent dpkg-mergechangelogs setup.
46 * Provide dgit setup-new-tree (like dpkg-setup-mergechangelogs
47 but only does it if not disabled in config).
48 * Set up git user.email and user.name from distro access config
49 or DEBEMAIL/DEBFULLNAME. Closes:#793410.
50 * Work around curl -sS -I printing `HTTP/1.0 200 Connection established'
51 before the actual header, so dgit works with https_proxy set (!)
52 * When key to use not specified any other way, use the debian/changelog
53 trailer line. Closes:#793423.
54 * Honour --git= (mostly).
55 * Test suite: More automatic enumeration of tests.
56 * Rename `git-build' operation to `gbp-build' to make it clearer what
57 it's for. Keep the old name as an alias.
58 * Show `dgit sbuild' in usage message.
59 * When we are using dpkg-buildpackage to clean before using it to also
60 do the build, let it do its cleaning thing as part of its run, rather
61 than running it twice. When we are _not_ supposed to be using
62 dpkg-buildpackage to clean, but we are running it to do the build,
64 * Also suppress spurious runs of the clean target when building using
69 dgit (1.0) unstable; urgency=medium
72 * Switch to new production git repositories for reading.
73 (this can no longer divert to alioth). Public readonly access
74 now works. Closes:#791447.
75 * Memoise git config lookups (big speedup!)
76 * Provide -wdd aka --clean=dpkg-source-d. Closes:#792433.
77 * Provide -wc aka --clean=check.
80 * Remove some obsolete caveats from BUGS.
81 * Reorganise and complete the configuration section.
82 * Remove obselete comment about DMs not being able to push.
83 We have, for now, a way to add keys manually. Closes:#720173.
86 * Remove configuration relating to alioth.
87 * Provide for different access mechanisms when pushing.
88 * Provide for configurable git url suffix.
89 * Allow git-url to be '' to force fallback to git-proto etc.
90 * Provide for checking git presence via http[s].
91 * Do some quoting on debug output (needed if the server might not
92 be trustworthy and might send us bad stuff).
93 * Talk to push.dgit.debian.org, rather than the .debian.net alias.
96 * Provide for mirroring git updates to a different server.
97 * Provide cgit-regen-config command for cgi-grnet-01.
98 * Make dgit-ssh-dispatch not spew (harmless) warnings if caller
99 tries for a shell session (ie SSH_ORIGINAL_COMMAND not set).
102 * Remove an obsolete comment from the code.
103 * Improve an error message from dgit-repos-policy-debian.
104 * Test suite: Break out t-make-hook-link.
105 * Fix a manpage typo.
107 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 19 Jul 2015 22:15:53 +0100
109 dgit (0.30) unstable; urgency=high
111 INCOMPATIBLE CHANGES:
113 * Client uses new infrastructure:
114 - Check for new dgit git service on dgit-git.debian.net (ie
115 gideon.debian.org), with transition plan based on diversion feature.
117 - Old versions of dgit will stop working when the server-side handle is
120 * dgit git trees no longer contain .pc for format `3.0 (quilt)' source
121 packages. Closes:#764606.
122 - It is deleted whenever we find it.
123 - Older versions of dgit will choke on trees without .pc.
124 - (When doing quilt fixup, we recreate a suitable .pc in a temporary
125 directory so that we can do dpkg-source --comit.)
127 * All users are urged to upgrade ASAP.
129 Other significant improvements:
131 * When generating quilt patches, try to linearise the git history into a
132 series of individual new patches for debian/patches. Closes:#770710.
134 * When receiving a push with dgit-repos-server, update the server's
135 refs/heads/master if we are pushing to what the distro regards as a
136 relevant branch, and the push would ff master. Closes:#728209.
138 * For non-Debian distros, distro version release tags contain distro
139 name a la DEP-14 (rather than hardcoding `debian/').
141 * Set up a merge driver for debian/changelog. Closes:#769291.
143 * --clean=git and --clean=none cause dgit to pass -nc to
144 dpkg-buildpackage, suppressing calls to the package's clean target.
145 Also, expand the documentation in this area slightly. Closes:#768590.
147 * Provide --clean=git-ff (aka -wgf), which is useful for dgit itself (!)
151 * Reduce some noise output and improve the clarity of some messages.
152 * Be more careful about tag updates during fetch: only update tags
153 referring to uploads to distro we are trying to fetch from.
154 * Change realpath dependency to `coreutils (>= 8.23-1~) | realpath'
159 * Fix handling of rmadison-based and gitless distros (e.g., Ubuntu).
160 * Add missing `gpgv' to test dependencies in debian/tests/control.
161 * Strip `-b <branch>' from contents of Vcs-Git header, when setting up
162 the vcs-git remote. Closes:#759374.
163 * Do not offer wget as an alternative dependency to curl. We always
164 unconditionally invoke curl and have no code to use wget.
166 * Complain about lack of cuddled values for value-taking single-letter
167 options, rather than thinking the user meat an empty value.
169 * Reject (rather than ignoring) further options merged witth -wn, -wg,
171 * Fix inaccurate error message when archive's git hash is not an
172 ancestor of git repo's git hash.
173 * Detect and bomb out on vendor-specific `3.0 (quilt)' patch series.
174 * Fix the rules clean target to remove test results and output.
176 Documentation improvements:
178 * Break out dgit(7) from dgit(1).
179 * Provide example workflow for dgit rpush. Closes:#763334.
180 (Also part of the fix for #768470.)
181 * Document that dgit repos are cloneable with git, in dgit(1)
182 section MODEL. [Andreas Barth.] Closes:#768470.
183 * Better documentation for quilt series handling.
184 * Document under `dgit push' that it is best to build with dgit too.
186 * Other minor clarifications and improvements.
188 Behind-the-scenes work:
190 * Use ftpmasterapi archive query method.
191 (Closes:#727702. Also partly obsoletes #768470.)
192 * New dgit-infrastructure binary package containing dgit-repos-server et
193 al. Client users probably don't want this stuff. Also, it provides a
194 convenient way to publish the dependencies.
195 * Many many bugfixes to the server side (dpkg-repos-server et al.).
196 * Add :..; prefix to ssh remote commands, for the benefit of future
197 forced command wrappers. Implicitly, this defines a new ssh-based
198 command protocol. Closes:#720174, #720175.
199 * Distro access configuration handling changes (should not be noticeable
201 * In places, significant restructuring or tidying up.
202 * Turn all perl warnings into errors using $SIG{__WARN__}.
204 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 05 Jul 2015 01:34:55 +0100
206 dgit (0.22.1) unstable; urgency=high
208 * Use Dpkg::Version::version_compare everywhere, not
209 Dpkg::Version::version_compare_string. The latter is entirely wrong,
210 meaning that dgit would get many version comparisons wrong.
213 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Tue, 04 Nov 2014 12:46:40 +0000
215 dgit (0.22) unstable; urgency=medium
218 * Clone removes destination directory on error. Closes:#736153.
219 * Work with wheezy-backports (and keep squeeze-backports working too).
221 * Work in read-only no-git-history mode with Ubuntu. You still have
222 to pass -dubuntu. Closes:#751781.
223 * Use mirror.ftp-master.debian.org DNS alias rather than coccia.
225 * Check hashes of files ourselves rather than running dget to
226 re-retreive the .dsc.
227 * Check SHA-256 of .dsc against hash from archive_query (ie projectb)
228 rather than letting dpkg-source do a signature verification.
229 Closes:#737619. Closes:#737625.
230 * Treat .dsc as bytes, just like everything else, rather than letting
231 HTTP::Message convert it to a Perl unicode string which the rest of
232 the program mishandles. Closes:#738536.
235 * Include canonicalised suite name in signed tag message.
236 * Mention cross-version dgit rpush incompatibility in manpage.
237 * Check for rpush protocol version incompatibility and crash early
239 * New script tests/using-intree for running tests on the source tree.
240 * Do not spew diff output to terminal (by default). Print sensible
241 message instead. Closes:#736526.
242 * Print better message for lack of configuration settings.
243 * Document that dgit rpush needs gnupg and your public key on the build
244 host. Closes:#736529.
245 * Fix a manpage reference to `--dget=' where `--dgit=' was intended.
246 * Provide t-archive-process-incoming and t-archive-query subroutines for
247 regression test scripts to use.
248 * Print better message for unknown operations.
249 * Provide `dgit clean'. Closes:#736527.
250 * When cloning, set up a remote `vcs-git' from the package's Vcs-Git
251 (and put an appropriate caveat in the manpage). Closes:#740687.
253 * Improve error message for .dsc having already been signed (iff
254 using libdpkg-perl 1.17.x). Closes:#731635.
255 * Improve error message for .dsc parsing failures more generally.
256 * Better reporting of child exit statuses (esp. deaths due to signals).
257 * In rpush, on protocol error talking to build host, check if the
258 subprocess died and report differently if so. Closes:#736528.
259 * Fixed a manpage typo.
260 * When tests invoke dgit, use --dgit= so that subprocesses use our
261 dgit rather than system one.
262 * Add a test for dgit rpush.
264 Major new feature, currently stalled awaiting server infrastructure:
265 * dgit-repos-server: New program for receiving signed-tag-based
266 pushes. Corresponding support in dgit itself, but not currently
267 used by default for any distro.
268 * Bring forward push of the version tag ref so it happens alongside
269 the push of the suite branch ref.
270 * New git-check and git-create methods "true" which are no-ops.
271 * test-dummy-drs `distro': for testing dgit and dgit-repos-server.
273 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Tue, 19 Aug 2014 11:24:02 +0100
275 dgit (0.21) unstable; urgency=medium
277 Bugfixes relating to unclean trees:
278 * Run a clean (of the specified type) before any build operation; do
279 this with `dpkg-buildpackage -T' clean if necessary, so -wd now works
280 with all the building methods.
281 * Refuse to do quilt fixup (explicitly requested, or as a result of
282 build) if the tree contains ignored files. Closes:#731632.
284 Error message improvements:
285 * Use failedcmd to report errors when ssh psql fails. Closes:#734281.
286 * failedcmd prints $us, not $_[0] - ie, dgit doesn't pretend,
287 in the error message, to be its child.
288 * Do not report the (irrelevant) $? when madison parsing fails.
290 Better workflow flexibility:
291 * Provide --build-products-dir option (and corresponding semantics
292 for -C) to specify where to find the files to upload. Closes:#731633.
294 Support for Debian backports suites:
295 * New quirks infrastructure in configuration and internals,
296 for suites (or perhaps distros) which are a bit like others.
297 * Use correct default archive location.
298 * Compute "-v" option default value correctly.
301 Packaging improvement:
302 * Add `Testsuite: autopkgtest' to debian/control. (This will only have
303 the right effect with recent enought dpkg; it will generate a harmless
304 warning with earlier versions of dpkg.)
306 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 19 Jan 2014 02:14:25 +0000
308 dgit (0.20) unstable; urgency=high
310 * Use newest (not oldest) version currently in suite when calculating
311 what value to use for -v<version> by default. Closes:#732781.
313 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 21 Dec 2013 19:13:56 +0000
315 dgit (0.19) unstable; urgency=low
318 * Provide "test-dummy" distro with "dummycat" access method.
319 * Provide a selection of autopkgtest (DEP-8) tests.
321 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Wed, 27 Nov 2013 18:27:17 +0000
323 dgit (0.18.2) unstable; urgency=high
325 Bump archive upload urgency to high.
327 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 24 Nov 2013 17:42:57 +0000
328 dgit (0.18.1) unstable; urgency=low
331 * sshpsql archive query method passes LANG=C. Closes:#729788.
332 * Subcommand program or argument options containing hyphens work.
333 (Eg, --dpkg-buildpackage:blah was previously incorrectly rejected.)
337 * Depend on curl | wget, as dget needs one of those. (The dput package,
338 which contains dget, doesn't require them because dput itself works
341 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 24 Nov 2013 17:36:03 +0000
343 dgit (0.18) unstable; urgency=low
346 * Remote push (dgit rpush), a la debsign -r. Closes:#721185.
349 * dgit build, by default, uses the archive to find out what the correct
350 -v<version> option is to pass to dpkg-genchanges. Closes:#727200.
351 * Abolish the sshdakls method and replace it with sshpsql: that is, ssh
352 (to coccia, by default) and run sql commands on the ftpmaster
353 database. This is faster and has fewer bugs but is vulnerable to db
354 schema changes. Closes:#726955. Closes:#720170. Closes:#720176.
355 * When generating git tags, quote the (uncanonicalised) changelog's
356 Distribution field as the suite.
357 * Command execution reports from --dry-run go to stderr.
360 * Support --gpg=... to provide a replacement command for gpg.
361 * Support --ssh=... and --ssh:... to affect how we run ssh.
364 * When using sbuild, pass the arguments to mergechanges in the right
365 order so that we use the correct Description (the _source one,
366 not the one from sbuild which didn't get e.g. -v<version>).
367 * push actually takes an optional suite, like it says in the synopsis.
369 * Fix dgit --damp-run sbuild to actually work.
370 * Fix the "shellquote" internal subroutine. The bugs in it ought not to
371 have caused any real trouble in previous versions of dgit.
373 Documentation and message fixes:
374 * manpage: Clarify comments about orig tarballs. Closes: #723605.
375 * manpage: Remove comment in BUGS about lack of policy docs
376 for Dgit field, which is specified now. Closes:#720201.
377 * manpage: Make discussion of --existing-package less scary. The
378 default archive access method no longer needs it. Closes:#720171.
379 * Mention "git merge", not "git-merge", in helpful message.
382 Internal and debugging improvements:
383 * Report chdir actions in debugging output.
384 * Improvements to implementation of --dry-run and --damp-run.
385 * Some code motion and cleanups.
387 Note: changelog entries for the following versions, which were uploaded
388 to Debian experimental, have been collapsed into this single entry:
389 0.18~experimental2 0.18~experimental1
390 0.17~experimental7 0.17~experimental6 0.17~experimental5
391 0.17~experimental4 0.17~experimental3 0.17~experimental2
393 0.16~experimental3 0.16~experimental2 0.16~experimental1
394 We do describe here all the changes since 0.17.
396 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 09 Nov 2013 10:12:13 +0000
398 dgit (0.17) unstable; urgency=high
400 * Do not grobble around in .git/refs/; instead, use git-show-ref.
401 This avoids breaking when git makes packed refs. Closes:728893.
402 * Clarify error message for missing refs/remotes/dgit/dgit/<suite>.
404 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 07 Nov 2013 00:02:47 +0000
406 dgit (0.16) unstable; urgency=high
408 * Format `(3.0) quilt' fixup does not mind extraneous other files
409 in the build tree (e.g., build products and logs). Closes: #727053.
410 * Set autoflush on stdout, to get better ordering of debugging
411 etc. output when stdout is redirected.
412 * New --damp-run mode, for more convenient and fuller testing etc.
414 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Tue, 22 Oct 2013 13:06:54 +0100
416 dgit (0.15) unstable; urgency=low
418 * Better handling of packages pushed using dgit and stuck in NEW.
419 (And, use of `--new' is not needed with fetch.) Closes: #722199.
420 * More comprehensive warnings in many cases of archive skew.
421 * Implement `dgit help' as well as `--help'. Closes: #721661.
422 * Provide `dgit version' and `--version'. Closes: #721654.
424 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 12 Sep 2013 00:14:05 +0100
426 dgit (0.14) unstable; urgency=low
428 * Include package name in tag message.
429 * Create directory .git/dgit when needed during build. Closes: #721428.
430 * Add Vcs-Git and Vcs-Browser [Richard Hartmann]. Closes: #721404.
431 These fields refer to the development branch, "master", on alioth,
432 not to the dgit suite refs (which are not accessible to git clone).
434 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 01 Sep 2013 18:30:44 +0100
436 dgit (0.13) unstable; urgency=low
438 * Reuse already-downloaded .orig files after checking their hashes.
439 Closes: #720526. (This introduces a dependency on Digest::SHA.)
440 * Do not always pointlessly fetch the .dsc twice. (That code was
441 erroneously duplicated during editing, apparently.)
442 * Remove DGET_UNPACK from the environment in case the user has set it.
443 * Remove scary warning from Description.
444 * When uploading to Debian, tell dput to upload to "ftp-master". This
445 avoids problems with derivatives whose dput has a different default.
447 * Fix some bugs in dgit fetch --dry-run which made dgit push
448 --dry-run often not work at all.
449 * Update the local tracking branch for the dgit remote, when pushing.
451 * Fix references in manpage to old Vcs-Dgit-Master field name.
452 * Reorganise manpage sections to be in a more conventional order.
453 * New manpage section on FILES IN THE SOURCE PACKAGE BUT NOT IN GIT.
456 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 29 Aug 2013 00:27:23 +0100
458 dgit (0.12) unstable; urgency=low
460 * Cope with packages with epoch. Closes: #720897.
461 * Improve error message for non-fast-forward push. Closes: #720896.
462 * New --ignore-dirty option to skip noncritical check. Closes: #720895.
463 * New --no-quilt-fixup option to suppress quilt fixup. RTFM.
464 * Add Closes line for #720595 to changelog entry for 0.11.
466 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Mon, 26 Aug 2013 16:50:39 +0100
468 dgit (0.11) unstable; urgency=low
470 * Location of dgit-repos is now git.debian.org:/git/dgit-repos/repos.
471 Closes: #720525. The rename on the server side will break older
473 * Fix bug which would make quilt patch fixup fail if git status
475 * Autogenerated quilt patch fixup patch Description contains several
476 recent git commits, rather than implying that the patch corresponds
477 exactly to the top git commit.
478 * Use "ftp.debian.org" not "http.debian.net" as the default Debian
479 archive. (http.debian.net tends to defeat certain kinds of cacheing,
480 and can also have more skew.)
481 * dgit build uses dpkg-buildpackage; there is a dgit git-build
482 for using git-buildpackage. Closes: #720595.
483 * Better error message for use of UNRELEASED suite. Closes: #720523.
484 * Do not canonicalise suite more than once. Related to: #720526.
485 * Fix a badly open-coded copy of check_not_dirty. Closes: #720524.
486 * Fix some bugs in building (eg build-source would fail to do the quilt
487 fixup; the --clean check in build was wrong).
488 * Add missing dependency on realpath.
489 * git-build (git-buildpackage wrapper) does not bother canonicalising
490 the suite if --git-ignore-branch is used.
492 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 25 Aug 2013 17:00:43 +0100
494 dgit (0.10) unstable; urgency=low
496 * Create .pc/applied-patches - do not empty it (!)
498 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sun, 25 Aug 2013 00:51:50 +0100
500 dgit (0.9) unstable; urgency=low
502 * New cleaning arrangements.
503 * More comprehensive workaround for `3.0 (quilt)'.
504 * In push, double-check the .changes against the changelog.
505 * Better error when source package contains .git. Closes: #720555.
506 * Change our .dsc field name to `Dgit'. Relevant to #720201.
507 * Fix bug handling our synthetic merges when we see them in
508 the remote suite branch.
509 * `3.0 (quilt)' fixup creates .pc/applied-patches since modern
510 dpkg-source creates it even though old ones didn't always.
512 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 24 Aug 2013 18:49:02 +0100
514 dgit (0.8) unstable; urgency=low
516 * Fix comparison of archive's .dsc's hash and git branch head
518 * When creating repos in dgit-repos (using the ssh-cmd method),
519 copy _template rather than using mkdir and git init.
521 * In push, do git fetch as well as archive fetch, or archive
524 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 23 Aug 2013 12:24:09 +0100
526 dgit (0.7) unstable; urgency=low
528 * If dak ls, or rmadison, reports multiple versions, look for them
529 all, and pick the newest .dsc that doesn't give 404.
530 * Manpage formatting fix.
531 * Name the local remote tracking branch remotes/dgit/dgit/<suite>
532 so that we avoid a warning from git about ambiguous branch names.
534 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 18:29:10 +0100
536 dgit (0.6) unstable; urgency=low
538 * Allow fetching when archive has out-of-date git hash in .dsc.
541 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 16:02:10 +0100
543 dgit (0.5) unstable; urgency=low
545 * Upload to unstable, as this version mostly works. (All the RC
546 bugs of which I'm aware are now properly represented in the BTS.)
548 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 15:38:00 +0100
550 dgit (0.4~pre2) experimental; urgency=low
552 * Mangle debian/<version> tags the way git-buildpackage does
553 (as of git-buildpackage 0.5.5, 3c6bbd0f4992f8da).
554 * Support dgit-distro.<distro>.keyid config option.
555 * Revert change to ssh to alioth CNAME, as the recommended CNAME
556 is to something with no write access to the fs and the new CNAME
557 has not yet been set up. This reintroduces #720172 :-/.
559 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 15:31:17 +0100
561 dgit (0.4~pre1) experimental; urgency=low
563 * Use dgit.debian.net vhost on alioth. Closes:#720172.
564 * Usage message. Closes:#720085.
565 * Provide "dgit sbuild".
566 * Assorted manpage fixes and improvements.
567 * Fail if a required config item is missing.
568 * Much better error messages.
569 * Better error checking when parsing RFC822-style control data.
570 * Better checking that the supplied .dsc and debian/changes correspond.
571 * Ordering improvement in push: don't add dsc field until git push done.
572 * New --distro option (helps with unknown suites).
575 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 22 Aug 2013 13:36:44 +0100
577 dgit (0.3) experimental; urgency=low
579 * New version which appears to be able to sort of work at least
582 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Sat, 17 Aug 2013 09:18:04 +0100
584 dgit (0.2) experimental; urgency=low
586 * New version which might actually work but probably won't.
588 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Fri, 16 Aug 2013 16:52:17 +0100
590 dgit (0.1) experimental; urgency=low
592 * Initial experimental (partial) version.
594 -- Ian Jackson <ijackson@chiark.greenend.org.uk> Thu, 15 Aug 2013 12:09:01 +0100