Usage message: Mention --edits-sources

[nailing-cargo.git] / README.md

nailing-cargo
=============

This is a wrapper tool for cargo, the Rust build tool and package
manager.  Functions:

 * Conveniently use local crates, including completely
   unpublished crates.
 * Perform out-of-tree builds, including in an account with
   no write access to the source tree.
 * Provide convenience aliases for target architecture names.
 * Make the default be offline (ie, not to access the internet).

These functions are of course configurable.

The primary source of information for nailing-cargo is the file
`../Cargo.nail` (which is in TOML syntax).  You put `Cargo.nail`
alongside the top-level git repositories you are working with, and
invoke nailing-cargo from the git directory containing the Rust
package you want to build.

Installing
----------

nailing-cargo is designed to be run out of a git clone:

```
$ git clone https://salsa.debian.org/iwj/nailing-cargo.git
$ ln -s `pwd`/nailing-cargo/nailing-cargo ~/bin
```

It is self-contained, depending only on a reasonably functional Perl
installation.

Most basic example usage
------------------------

```
$ cd myproject
$ cat >../Cargo.nail
subdirs="""
myproject
mylibrary
"""
$ nailing-cargo -u fetch
$ nailing-cargo build
```

Documentation table of contents
-------------------------------

<!-- TOC autogenerated by ./markdown-toc-filter, do not edit -->

  * [Introduction](#nailing-cargo)
    * [Installing](#installing)
    * [Most basic example usage](#most-basic-example-usage)
    * [Documentation table of contents](#documentation-table-of-contents)
  * [Using local crates, or locally modified crates](#using-local-crates-or-locally-modified-crates)
    * [How nailing-cargo helps with using local crates](#how-nailing-cargo-helps-with-using-local-crates)
    * [Telling nailing-cargo how to massage `Cargo.toml`](#telling-nailing-cargo-how-to-massage-cargo.toml)
  * [Out-of-tree builds](#out-of-tree-builds)
    * [How nailing-cargo helps with out-of-tree builds](#how-nailing-cargo-helps-with-out-of-tree-builds)
    * [Configuring out-of-tree builds](#configuring-out-of-tree-builds)
  * [Target architecture convenience aliases](#target-architecture-convenience-aliases)
  * [Default change to offline mode](#default-change-to-offline-mode)
  * [Invocation and command-line option reference](#invocation-and-command-line-option-reference)
    * [Usages](#usages)
    * [Options](#options)
    * [Environment of the build command](#environment-of-the-build-command)
  * [Configuration reference](#configuration-reference)
    * [Source directories and packages (toplevel)](#source-directories-and-packages-toplevel)
    * [`[alt_cargolock]`: Alternative `Cargo.lock` filename](#alt_cargolock-alternative-cargo.lock-filename)
    * [`[oot]`: Out-of-tree build support](#oot-out-of-tree-build-support)
    * [`[arch]`: Architecture convenience aliases](#arch-architecture-convenience-aliases)
    * [`[misc]`: Miscellaneous individual nailing-cargo config](#misc-miscellaneous-individual-nailing-cargo-config)
  * [Limitations and bugs](#limitations-and-bugs)
  * [Contributing and legal](#contributing-and-legal)
    * [Legal](#legal)

Using local crates, or locally modified crates
==============================================

cargo does not work well with local crates,
especially completely unpublished ones.
(See [issue#6713](https://github.com/rust-lang/cargo/issues/6713),
[stackoverflow](https://stackoverflow.com/questions/33025887/how-to-use-a-local-unpublished-crate),
[issue#1481](https://github.com/rust-lang/cargo/issues/1481),
[my blog](https://diziet.dreamwidth.org/1805.html).)

Using a local version of a crate should be possible without putting
paths into your `Cargo.toml` and without editing complex
configuration.

How nailing-cargo helps with using local crates
-----------------------------------------------

nailing-cargo temporarily edits all the `Cargo.toml` files in all the
subdirectories you mention, to refer to each other; then it runs
cargo; and then it puts everything back.

Telling nailing-cargo how to massage `Cargo.toml`
-------------------------------------------------

To find the subdirectories, and the packages, nailing-cargo looks for
`subdirs` and `packages` in `Cargo.nail`.

For straightforward use, write `subdirs` as a multi-line string
containing a list of subdirectory names one per line.  In each of
these directories `Cargo.toml` will be massaged, and the package there
will be used for other massaged `Cargo.toml`s.

See the [Configuration reference](#configuration-reference) for full details.

Scope of nailing-cargo's local crate functionality
--------------------------------------------------

nailing-cargo's `Cargo.toml` massaging will allow you to easily build
an interdepending set of local packages, possibly even including
private unpublished packages, and/or locally-modified versions of
published packages.  These local packages can freely depend on
published packages (eg from `crates.io`) in the usual way.

Compared to the corresponding cargo feature, nailing-cargo's approach:
(i) works even for local crates that have not been published anywhere; and
(ii) is a lot simpler to configure.

But nailing-cargo's local crate support won't work if any non-local
crate needs to be rebuilt against a local crate (ie, a local version
of one of its dependencies).  If that is your requirement, either make
local versions of the intermediate crates in the dependency graph, or
use the cargo override facility --- see [Overriding
Dependencies](https://doc.rust-lang.org/cargo/reference/overriding-dependencies.html)
in the Cargo Book.

Out-of-tree builds
==================

It is often desirable to run builds in a way that does not write to
the source tree.  cargo's enthusiastic approach to the dependency
management task means that it is a good idea to try to insulate your
main working environment from the many things cargo has decided to
download and execute.

However, when you tell cargo to do an out of tree build (using
`--manifest-path`) it will insist on `Cargo.lock` being in the source
directory, and often will insist on writing to it.

How nailing-cargo helps with out-of-tree builds
-----------------------------------------------

nailing-cargo (configured appropriately) copies files back and forth
to between the source and build directories, and runs cargo as your
build user.

The `Cargo.lock` must still be saved in your source tree somewhere.
nailing-cargo arranges this for you.  You can either put this file in
`.gitignore`; or commit it to git; or you can tell nailing-cargo to
save it as something like `Cargo.lock.example`.

Depending on the circumstances, nailing-cargo uses a variety of
strategies, including `--manifest-path` options, and linkfarming, to
make out of tree builds.  Some crates don't natively support
out-of-tree builds, in which case passing a `--linkfarm` option to
nailing-cargo can be helpful.

Configuring out-of-tree builds
------------------------------

To enable out-of-tree-builds, put an `[oot]` section in your
`Cargo.nail` or one of nailing-cargo's other config files.
In that section, specify at least `use`.

Also, specify `dir`, or create a symlink `Build` next to `Cargo.nail`,
pointing to to your build area.

For example,
```
[oot]
use='ssh'
user='rustcargo'
```
will have nailing-cargo run `ssh rustcargo@localhost` to
run build commands.

Target architecture convenience aliases
=======================================

If you are cross-building you may need to tell cargo `--target=`.
The architecture names are quite long and inconvenient.

A simple shell alias would help a lot, except that cargo rejects
`--target=` when it thinks it's not needed.

In your nailing-cargo config, you can write something like
`arch.RPI='arm-unknown-linux-gnueabihf'`.  Then `nailing-cargo -TRPI`
will DTRT.  In fact, you do not even need to specify that particular
arch alias, since it is built-in to nailing-cargo.

Default change to offline mode
==============================

It seems to me that build tools should be explicit about their use of
the network.  So by default, nailing-cargo passes `--offline` to
cargo.

If you disagree with my opinion, write `misc.online=true` in your
nailing-cargo configuration.  `misc.online=false`, and command line
options, are also available, for overriding.

If you agree with me, you may wish to use `nailing-cargo
generate-lockfile`, which can update (even an existing) `Cargo.lock`
without going online, instead of `update`.

Invocation and command-line option reference
============================================

Usages
------

```
1$ nailing-cargo <nailing-opts> <cargo-opts> [--] <subcmd>...
2$ nailing-cargo <nailing-opts> --- <cargo> <cargo-opts> [--] <subcmd>...
3$ nailing-cargo <nailing-opts> --- [--] <build-command>...
```
Ususally the `--` is not needed.  (It should generally be passed by
programs which wrap nailing-cargo.  See [Invocation argument disambiguation rules](#invocation-argument-disambiguation-rules), below.)

In usage 1, nailing-cargo runs `cargo` (from `PATH`).  In the usage 2
nailing-cargo runs `<cargo>`.  In both these cases it adds its own
options to control cargo's behaviour.  In both of these cases
nailing-cargo looks at `<subcmd>` to determine the cargo subcommand
being run: this controls various defaults, to try to do the right
things.

In the third syntax, nailing-cargo runs `<build-command>...` without
additional arguments and does not attempt to identify the cargo
subcommand(s) that it will run.  Possibly it will be necessary to pass
`--online` or `--cargo-lock-update`, or even `--cargo-*arg*`

### Invocation argument disambiguation rules ###

For authors of tools which call nailing-cargo (and pedants):

The usages overlap in syntax!  nailing-cargo follows the following
rules when interpreting its command line:

  * The first option not recognised as a nailing-cargo option is
    treated as the start of the `<cargo-opts>`.

  * `<cargo-opts>` are terminated by `--` (which is removed) or the
    first argument which does not start with a `-` or `+`.

    (It is not possible to get nailing-cargo to pass the value `--`
    as a separate argument to a cargo global option, but cargo global
    options can typically take the values cuddled with `=`, so doing
    that is not necessary.)

  * After `---`, nailing-cargo will search for a `--`, to the end of
    the arguments if necessary.  The position of the `--` determines
    whether this is usage 2 or usage 3, and what `<subcmd>` is.

    If the arguments after `nailing-cargo ... ---` might contain `--`
    anywhere, an explicit `--` should be passed.

  * If no `--` appears after `---`, the word after `---` is the
    command to run; if its final pathname component contains the
    string `cargo`, it is treated as `<cargo>` (implying usage 2 and
    the search for `<subcmd>`).  Otherwise it is treated as
    `<build-command>` (usage 3).

Options
-------

  * `-v`: Increase verbosity.  Default is 1.

  * `-q`: Set verbosity to 0.

  * `-D`: Increase amount of debugging dump.

  * `-n`: "No action": stop after writing `Cargo.toml.nailing~`
       everywhere, and do not run any build command.

  * `-T<arch>` | `--target=<arch>`

    Specify target architecture.

    This option translates to a `--target=<arch>` option to cargo
    (when the subcommand accepts it).

    If `<arch>` starts with a capital ascii letter, it is an alias
    for some other arch: it is looked up in the configuration, and
    then in the builtin arch alias list.  The builtin list is
    equivalent to:

```
[arch]
RPI="arm-unknown-linux-gnueabihf"
WASM="wasm32-unknown-unknown"
```

  * `-o` | `--online` | `-O` | `--offline`

    Whether to allow cargo to make network access.  nailing-cargo
    always passes `--offline` to cargo, unless `--online` is in
    force.  The default value depends on the configuration and the
    cargo subcommand - see [`[misc]` `online`](#misc_online),
    under Configuration.

  * `-u` | `--cargo-lock-update` | `-U` | `--no-cargo-lock-update`

    Allows (or disallows) cargo to update `Cargo.lock` in the source
    directory.  Without this enabled, nailing-cargo passes `--locked`
    to cargo.

    With this enabled, in an out-of-tree build the `Cargo.lock` and
    `Cargo.toml` are copied to the build directory along with a
    linkfarm, to fool cargo.  After cargo has run, the resulting
    `Cargo.lock` is copied back to the source tree.

    Default is no update unless the whole point of the cargo
    subcommand is to update `Cargo.lock`.

  * `-c` | `-C`

    Controls the addition of cargo command line options; ie,
    whether nailing-cargo should treat the build command as if it
    were cargo.
    With `-C`, nailing-cargo will not add additional options
    to the build command.  With `-c` it will pass those options
    after the cargo subcommand (usages 1 and 2) or right
    after the build command (usage 3).

    The cargo options are in any case also passed in the
    environment - see [Environment of the build command](#environment-of-the-build-command).

    The default is to pass cargo options if the command line
    parsing yielded a cargo command and options (usages 1 and 2),
    rather than a non-cargo build command (usage 3).  `-C` and `-c`
    do not affect the parsing of nailing-cargo's command line.

  * <a name="s_subcommand">`-s<subcommand>`</a>

    Behave as if the build command were `cargo <subcommand>`.
    This influences the logic which tries to determine which
    options to pass to cargo, whether cargo needs to be online, and
    whether cargo might want to update `Cargo.lock`.

    nailing-cargo knows about the following commands:
     * `fetch`
     * `fmt`
     * `generate-lockfile`
     * `update`

    All other subcommands are (silently) treated the same way
    as `build` (ie, no subcommand properties).  See
    `--subcommand-props` for more detail about how the
    subcommand affects nailing-cargo's behaviour.

    The default is to use the cargo subcommand found from parsing
    nailing-cargo's command line.  NB: `-s` does not affect
    which build command (and which cargo subcommand) is actually run.

  * <a name="subcommand_props">`--subcommand-props=<prop>,...`</a>

    Specify the properties of the subcommand.  This is an
    alternative to `-s<subcmd>`.  The usual properties are:

    * `lock_update`: cargo will want to update `Cargo.lock`.  (The `-u` and `-U` options override this.)
    * `online`: this subcommand makes no sense to run offline.  (The `-o` and `-O` options, and the configuration, can override this.)
    * `edits`: The purpose of this subcommand is to edit the source tree.  Produces warning if `--edit-sources` mode not specified.
    * `!target`: cargo would reject `--target=<arch>`; in this case nailing-cargo's `-T` option is ineffective.
    * `!target-dir`: cargo would reject `--target-dir`, so don't pass it.  (Usually we pass `--target-dir=target` when we pass `--manifest-path`, since cargo's default is `target` in the same directory as `Cargo.toml`.)
    * `linkfarm-shallow`: Make the default be `--linkfarm=shallow`.  This is the default for `miri` and can also be used for other subcommands which do not understandg `--manifest-path` properly.
    * `linkfarm-gitclean`: Make the defaults be `--linkfarm=git` and `--preclean-build=src`.

    There are also some properties which should not be needed, but are
    provided for completeness.  Do not use these to solve the problem
    of nailing-cargo passing cargo options to a build command which is
    not cargo - use `-C` for that.  The properties whose use is discouraged:

    * `!manifest-path`: cargo would reject `--manifest-path`, so don't pass it (and don't pass `--target-dir` either).  Only makes any difference for out-of-tree builds.  Things will probably go wrong unless the build command looks at `[NAILING]CARGO_MANIFEST_DIR`.
    * `!locked`: cargo would reject `--locked`, so don't pass it.  Hazardous.
    * `!offline`: the build command would reject `--offline`, so never pass it.  *Not* overridden by configuration or command line.


  * `--linkfarm[=no|shallow|git|full]`: Override nailing-cargo's
    approach to out-of-tree builds.  Normally nailing-cargo chooses
    automatically whether to make a linkfarm, and precisely what kind
    of linkfarm, based on the cargo subcommand.  The linkfarm styles
    are:

    * `no`: Do not make a linkfarm; pass a `--manifest-path` option
      pointing to the actual source directory.  This is the default
      for most cargo commands.

    * `shallow`: Symlink top-level objects in the source directory,
      including whole subdirectories.  This the default when
      nailing-cargo thinks cargo is going to update `Cargo.lock`.

    * `git`: Make a deep linkfarm, with subdirectories.  Symlink
      those objects tracked by git.  This is the default for
      `cargo publish`.

    * `full`: Make a deep linkfarm and symlink every nondirectory found
      in the source tree.  This will including all sorts of junk,
      including for example editor backup files.

    Whenever nailing-cargo linkfarms, old symlinks pointing back to
    the source tree are deleted.  In each case, `Cargo.lock` is not
    symlinked, but copied.  If nailing-cargo expects cargo to update
    `Cargo.lock`, it will copy it back to the source tree afterwards.
    Just `--linkfarm` is the same as `--linkfarm=git`.

  * `--edit | --edit-sources | -E`: Permits the cargo command to edit
    sources in the source tree.  This is achieved by *copying* the
    entire source tree (all files tracked by git) into the destination
    directory, and then copying back all changed files.  *Only git
    tracked filles* can be edited by the cargo command; edits to
    other files, and creation of new files, will be ignored.

    If you are running out of tree builds for privsep reasons, you
    should use git to review the edits made by the cargo command and
    either stage and commit them, or reject them.

    This is the default mode for `nailing-cargo fmt`.

  * `--just-linkfarm[=shallow|git|full]`: Make the out-of-tree
    linkfarm as if for `--cargo-lock-update`, but do not actually run
    any command, nor try to copy back a a generated `Cargo.lock`.
    Forces `--keep-linkfarm` (even if the contrary is also specified).

    With a linkfarming mode, overrides (and is overridden by)
    `--linkfarm=`.  Without a linkfarming mode, and without
    `--linkfarm`, the default is `shallow`.

  * `--keep-linkfarm` | `--clean-linkfarm`: When doing an out-of-tree
    lockfile update, controls whether the linkfarm is kept afterwards.
    Overrides the `oot.clean` config option.  (Default: keep.)

  * `--[no-]preclean-build[=no|src|full]`: When doing an out-of-tree
    build, controls whether the build directory is purged of leftover
    contents *before* the build is run.  The usual default is `no`.
    For `cargo publish`, the default is `src`, which deletes
    everything except the directory `target`.  `full` means to clean
    out that too.

  * `--leave-nailed`: At the end, leave all the `Cargo.toml` files in
    their edited state, rather than (trying to) clean them up.  To
    clean this up later, run `nailing-cargo` again without this option.
    Without this option, the nailed versions are left in
     `.Cargo.toml.nailed~`, so you only need this if you want to run
    cargo by hand or something.

  * `--just-run`: Execute the specified command (perhaps concurrently
    with other commands), but do not manipulate any of Cargo's
    metadata fiules.  Useful in out of tree mode to invoke a non-cargo
    command in the build environment.  Implies `--no-nail`,
    `--no-cargo-lock-manip` and `--no-concurrency-lock` (overrideable
    by later occurrences of the corresponding opposite options).
    Hazardous if the command is actually cargo, or will run cargo.

  * `--no-nail` | `--nail` (default): Whether to actually nail - ie,
    whether to actually modify any `Cargo.toml`s while running the
    command.  This can be useful, e.g., in out-of-tree mode with
    commands that don't actually invoke cargo.  Consider passingm
    `--no-lock` too.

  * `--no-cargo-lock-manip` | `--cargo-lock-manip` (default):
    Whether to manipulate `Cargo.lock`.  For example, whether to copy
    it to the build tree and back (in out of tree mode) and whether to
    rename it from an alternative lockfile name, and put it back.
    Overrides `-u` etc.

  * `--no-concurrency-lock` | `--concurrency-lock` (default): Whether
    to take the nailing-cargo lock.  Some kind of protection against
    concurrent operation is necessary to prevent multiple instances of
    nailing-cargo trashing each others' work, and possibly mangling
    your `Cargo.toml`s, `Cargo.lock`, etc., so `--no-concurrency-lock`
    is dangerous unless you take other measures against concurrent
    execution.

  * `-h` | `--help`: Print usage summary.

  * `--doc` | `--man` | `--manual`: Format this manual into html using
    `pandoc` and display it with `w3m`.

Environment of the build command
--------------------------------

nailing-cargo passes these environment variables to the build command:

  * `CARGO_MANIFEST_DIR`: invocation `.` (invocation directory)
  * `NAILINGCARGO_MANIFEST_DIR`: same as `CARGO_MANIFEST_DIR`
  * `NAILINGCARGO_WORKSPHERE`: invocation `..` (parent)
  * `NAILINGCARGO_BUILD_DIR`: build directory (even if same as source)
  * `NAILINGCARGO_BUILDSPHERE`: parent of build dir (only set if out-of-tree)
  * `NAILINGCARGO_CARGO_OPTIONS`: additional options that nailing-cargo passed (or would pass) to cargo.  Space-separated; does not include `--manifest-path`.

All of these are absolute paths.

### Build commands which wrap cargo ###

If you specify a build command which eventually runs cargo, you may
wish to pass on to your cargo the options which nailing-cargo would
have passed.  This will definitely be necessary if you are using nailing-cargo's out-of-tree facility.

In such a situation, do it like this:
```
  cargo build --manifest-path="${CARGO_MANIFEST_DIR-.}"/Cargo.toml $NAILINGCARGO_CARGO_OPTIONS
```

If you need to run a cargo subcommand which doesn't understand some of
nailing-cargo's options, currently, you must strip them out of
`NAILINGCARGO_CARGO_OPTIONS` yourself - or pass some `-s` or
`--subcmd-props` option to nailing-cargo (but that is a layering
violation and may not work if one build command runs various different
cargo runes).

Configuration reference
=======================

nailing-cargo reads these configuration files:
```
    /etc/nailing-cargo/cfg.toml
    ~/.nailing-cargo.toml
    ./.nailing-cargo.toml
    ../Nailing-Cargo.toml
    ../Cargo.nail
```
Settings in later-mentioned files override ones in earlier-mentioned
files.

Source directories and packages (toplevel)
------------------------------------------

Note that unlike everything else, these keys (`packages` and
`subdirs`) are read only from `Cargo.nail` (see "Limitations and
bugs", below).

These keys specify a combination of (i) a mapping from package name to
source subdirectory (ii) a set of subdirectories whose `Cargo.toml`
must be massaged.

  * `packages`: a map keyed by package name, giving the subdirectory
    for each one.

    This causes each mentioned subdirectory's `Cargo.toml` to be
    massaged, and records that subdirectory as the source for that
    package.  (nailing-cargo will check that subdirectory actually
    contains the indicated package.)

    Each value can be just the subdirectory name (eg `[packages]`
    `mylibrary='mylibrary-test'`) or itself a map with the key `subdir`
    (eg `[packages.mylibrary]` `subdir='mylibrary-test'`).

  * `subdirs`: a list of subdirectory names to process.

    Each subdirectory's `Cargo.toml` will be massaged.  Also, the
    subdirectory will be examined to see what package it contains; it
    will then be used as the source for that package, unless that
    package appears in an entry in `packages`, or an earlier entry in
    `subdirs`.

    This can be a list of strings (eg `subdirs =
    ['myproject','mylibrary']`).  Or it can be single multi-line
    string containing one subdirectory name per line; in that
    case, `#`-comments are supported and tabs and spaces are ignored
    (see "Most basic example usage" above.)

In each case the subdirectory should usually be a relative pathname;
it is relative to the directory containing `Cargo.nail`.

`[alt_cargolock]`: Alternative `Cargo.lock` filename
----------------------------------------------------

To control use of alternative `Cargo.lock` filename, use the section
`[alt_cargolock]`.  Settings here:

  * `file = <some leafname>`.

  * `file = true`: Equivalent to `file = "Cargo.lock.example"`.
    (This is the default.)

  * `file = false`: Disables this feature.

  * `force = false`: Uses the alternative filename only if it
     already exists.  (This is the default.)

  * `force = true`: Always uses the alternative filename.

`[oot]`: Out-of-tree build support
----------------------------------

  * `dir`: The build directory.  If relative, it is relative to the
   parent of the invocation directory (and could be a symlink then).
   Default is `Build` (assuming `use` is specified).

   The build directory will contain one subdir for each package: each
   subdir in the build dir corresponds to one source dir where
   nailing-cargo was invoked.  nailing-cargo will arrange to create
   these subdirectories, so the build directory can start out empty.

  * `use`: How to become the build user.  Needs to be combined
    with other setting(s):

    * `ssh`: Use ssh.  `user` must be given as well and can be
       a username on localhost, or the `<user>@<host>`
       argument to ssh.

    * `command_args`: `command` must be specified as a list,
       specifying a command and arguments which work like `nice`.

    * `command_sh`: `command` must be specified as a list,
       specifying a command and arguments which work like `sh -c`.

    * `null`: Run builds as the same user.

    * `really`: Use `really` from `chiark-really.deb`.
       `user` must be given as well.

    * `disable': Disable this feature, even if `dir` is set.

 * `command`: The command to run for `command_sh` or `command_args`.

   In both cases, this is a command and its arguments/options.  The
   list will be passed to `execvp`.  The difference between
   `command_args` and `command_sh` is in what nailing-cargo appends to
   the specified `command` list:

   For `command_args`, nailing cargo appends multiple more arguments;
   each one should be passed as-is as a single argument to the actual
   build command.  This is correct if `command` is a program like
   `nice` or `really`, which takes a command and its arguments and
   does not go via the shell.

   For `command_sh`, nailing-cargo appends one single further
   argument.  That argument is a shell command; nailing-cargo
   constructs it by shell-quoting the real command and arguments and
   wrapping them up in a small script, the text of which becomes the
   extra argument to `command`.  This is correct if `command` will
   pass its argument to a bournelike shell - for example, if `command`
   is an ssh rune for a remote account whose shell is `/bin/sh` or
   `/bin/bash`.

 * `user`: The build username, for `really` and `ssh`.  For `ssh`, can
   be just the local username (meaning `@localhost`), or
   `<user>@<host>`.

 * `clean` (boolean): When doing a `Cargo.lock` update, which involves
   linkfarming in the build directory, whether the clean up the
   linkfarm afterwards.  Default: `true`.  Can be overridden by
   `--keep-linkfarm` or `--clean-linkfarm`.

`[arch]`: Architecture convenience aliases
------------------------------------------

This is a map from archictecture aliases to full cargo architecture
names.  The keys are the aliases; each entry should be a string, the
cargo architecture name.

Only keys starting with an ascii uppercase letter are relevant, since
other names are not looked up in this alias map.

`[misc]`: Miscellaneous individual nailing-cargo config
-------------------------------------------------------

 * <a name="misc_online">`online`</a>:

   Specifies whether to allow or prevent cargo from accessing the
   network.  Value is a boolean or `'auto'`.  `'auto'` permits online
   access if the cargo subcommand being invoked is one whose main
   purpose involves online access.

   Implemented by passing `--offline` to cargo when necessary ---
   cargo's default is online.  nailing-cargo's default is
   `'auto'`.

Limitations and bugs
====================

  * nailing-cargo temporarily dirties your source trees, including
    particularly `Cargo.toml` and `Cargo.lock`; and if nailing-cargo
    crashes or is interrupted these changes may be left behind.
    Unfortunately it is not possible to avoid this temporary dirtying
    because the cargo team have deliberately made cargo inflexible -
    [issue#6715](https://github.com/rust-lang/cargo/issues/6715).  
    At least, running nailing-cargo again will clean up any mess
    left by an interrupted run.

  * nailing-cargo needs to understand the behaviour of the cargo
    subcommand you are running - especially for out-of-tree builds.
    nailing-cargo only has a short builtin list of commands it knows
    about (see [`-s<subcommand`](#s_subcommand)).  For other commands, you may need to
    add an entry to `@subcmd_props` in the source, or use
    [`--subcommand-props`](#subcommand_props).

    Contributions of additonal entries to `@subcmd_props` (or bug
    reports about missing entries) are of course very welcome.

  * Out-of-tree builds ought to support `sudo`.  Patches welcome.

  * Out-of-tree builds require a unified filesystem view: eg, different
    users on the same host, NFS, or something.

    Specifically, the invocation and build execution environments must
    both have visibility of the source and build directories, at the
    same absolute pathnames.  The invocation environment must be able
    to write to the build environment (but vice versa is not
    required).

    This could be improved.

  * The alternative `Cargo.lock` filename must currently be a leafname.  I
    think fixing this just involves review to check other values work
    properly.

  * The alternative `Cargo.lock` file must be on the same filesystem
    as the source tree.  This is not so easy to fix; we would want the
    existing algorithm but a fallback for the different-filsystem case.

  * `Cargo.nail` is unconditionally looked for in the parent directory.
    Ideally this should be configurable, and also perhaps be able to
    combine multiple `Cargo.nail` files?  Relatedly, although
    nailing-cargo can read multiple config files, it can only handle
    one file specifying directories and packages.

  * nailing-cargo uses a single lockfile alongside your `Cargo.nail`,
    rather than a more sophisticated scheme involving locking
    particular directories.  This means that if you run multiple
    copies of nailing-cargo at once, in different directories, but
    with `Cargo.nail` files which imply overlapping sets of package
    directories, things will go Badly Wrong.

Contributing and legal
======================

nailing-cargo is Free Software.

Please help improve it.  Contributions (to address the limitations, or
to add new facilities to help work with cargo) are welcome by email to
`ijackson@chiark.greenend.org.uk` or via the [Salsa
project](https://salsa.debian.org/iwj/nailing-cargo).

If you plan to do substantial work, please do get in touch with a
sketch of your proposed changes.

Legal
-----

This project accepts contributions based on the git commit
Signed-off-by convention, by which the contributors certify their
contributions according to the Developer Certificate of Origin version
1.1 - see the file DEVELOPER-CERTIFICATE.

Copyright (C) 2019-2020 Ian Jackson and others

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as
published by the Free Software Foundation, either version 3 of the
License, or (at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

Individual files generally contain the following tag in the copyright
notice, instead of the full licence grant text:
```
   SPDX-License-Identifier: AGPL-3.0-or-later
```
As is conventional, this should be read as a licence grant.