1 from __future__ import absolute_import
\r
2 from __future__ import division
\r
3 #Init has to be imported first because it has code to workaround the python bug where relative imports don't work if the module is imported as a main module.
\r
6 import ConfigParser, os, traceback, math, re, zlib, base64
\r
8 #########################################################
\r
9 ## Default settings when none are found.
\r
10 #########################################################
\r
12 #Single place to store the defaults, so we have a consistent set of default settings.
\r
13 profileDefaultSettings = {
\r
14 'nozzle_size': '0.4',
\r
15 'layer_height': '0.2',
\r
16 'wall_thickness': '0.8',
\r
17 'solid_layer_thickness': '0.6',
\r
18 'fill_density': '20',
\r
19 'skirt_line_count': '1',
\r
21 'print_speed': '50',
\r
22 'print_temperature': '0',
\r
24 'filament_diameter': '2.89',
\r
25 'filament_density': '1.00',
\r
26 'machine_center_x': '100',
\r
27 'machine_center_y': '100',
\r
28 'retraction_min_travel': '5.0',
\r
29 'retraction_speed': '40.0',
\r
30 'retraction_amount': '0.0',
\r
31 'retraction_extra': '0.0',
\r
32 'travel_speed': '150',
\r
33 'max_z_speed': '3.0',
\r
34 'bottom_layer_speed': '20',
\r
35 'cool_min_layer_time': '10',
\r
36 'fan_enabled': 'True',
\r
39 'model_scale': '1.0',
\r
45 'model_rotate_base': '0',
\r
46 'model_multiply_x': '1',
\r
47 'model_multiply_y': '1',
\r
48 'extra_base_wall_thickness': '0.0',
\r
49 'sequence': 'Loops > Perimeter > Infill',
\r
50 'force_first_layer_sequence': 'True',
\r
51 'infill_type': 'Line',
\r
52 'solid_top': 'True',
\r
53 'fill_overlap': '15',
\r
54 'support_rate': '50',
\r
55 'support_distance': '0.5',
\r
57 'enable_skin': 'False',
\r
58 'enable_raft': 'False',
\r
59 'cool_min_feedrate': '5',
\r
60 'bridge_speed': '100',
\r
61 'bridge_material_amount': '100',
\r
63 'raft_base_material_amount': '100',
\r
64 'raft_interface_material_amount': '100',
\r
65 'bottom_thickness': '0.3',
\r
67 'enable_dwindle': 'False',
\r
68 'dwindle_pent_up_volume': '0.4',
\r
69 'dwindle_slowdown_volume': '5.0',
\r
71 'add_start_end_gcode': 'True',
\r
72 'gcode_extension': 'gcode',
\r
73 'alternative_center': '',
\r
77 alterationDefault = {
\r
78 #######################################################################################
\r
79 'start.gcode': """;Start GCode
\r
81 G90 ;absolute positioning
\r
82 M107 ;start with the fan off
\r
84 G28 X0 Y0 ;move X/Y to min endstops
\r
85 G28 Z0 ;move Z to min endstops
\r
87 ; if your prints start too high, try changing the Z0.0 below
\r
88 ; to Z1.0 - the number after the Z is the actual, physical
\r
89 ; height of the nozzle in mm. This can take some messing around
\r
90 ; with to get just right...
\r
91 G92 X0 Y0 Z0 E0 ;reset software position to front/left/z=0.0
\r
92 G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
\r
93 G92 E0 ;zero the extruded length
\r
95 G1 F200 E5 ;extrude 5mm of feed stock
\r
96 G1 F200 E3.5 ;reverse feed stock by 1.5mm
\r
97 G92 E0 ;zero the extruded length again
\r
99 ;go to the middle of the platform, and move to Z=0 before starting the print.
\r
100 G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
\r
101 G1 Z0.0 F{max_z_speed}
\r
103 #######################################################################################
\r
104 'end.gcode': """;End GCode
\r
105 M104 S0 ;extruder heat off
\r
106 G91 ;relative positioning
\r
107 G1 Z+10 E-5 F{max_z_speed} ;move Z up a bit and retract filament by 5mm
\r
108 G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
\r
110 G90 ;absolute positioning
\r
112 #######################################################################################
\r
113 'support_start.gcode': '',
\r
114 'support_end.gcode': '',
\r
115 'cool_start.gcode': '',
\r
116 'cool_end.gcode': '',
\r
118 #######################################################################################
\r
119 'nextobject.gcode': """;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
\r
121 G1 Z{clear_z} E-5 F{max_z_speed}
\r
123 G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
\r
126 G1 Z0 F{max_z_speed}
\r
128 #######################################################################################
\r
129 'switchExtruder.gcode': """;Switch between the current extruder and the next extruder, when printing with multiple extruders.
\r
137 preferencesDefaultSettings = {
\r
138 'wizardDone': 'False',
\r
139 'startMode': 'Simple',
\r
141 'machine_width': '205',
\r
142 'machine_depth': '205',
\r
143 'machine_height': '200',
\r
144 'extruder_amount': '1',
\r
145 'extruder_offset_x1': '-22.0',
\r
146 'extruder_offset_y1': '0.0',
\r
147 'extruder_offset_x2': '0.0',
\r
148 'extruder_offset_y2': '0.0',
\r
149 'extruder_offset_x3': '0.0',
\r
150 'extruder_offset_y3': '0.0',
\r
151 'filament_density': '1300',
\r
152 'steps_per_e': '0',
\r
153 'serial_port': 'AUTO',
\r
154 'serial_baud': '250000',
\r
155 'slicer': 'Cura (Skeinforge based)',
\r
156 'save_profile': 'False',
\r
157 'filament_cost_kg': '0',
\r
158 'filament_cost_meter': '0',
\r
160 'extruder_head_size_min_x': '70.0',
\r
161 'extruder_head_size_min_y': '18.0',
\r
162 'extruder_head_size_max_x': '18.0',
\r
163 'extruder_head_size_max_y': '35.0',
\r
166 #########################################################
\r
167 ## Profile and preferences functions
\r
168 #########################################################
\r
170 ## Profile functions
\r
171 def getDefaultProfilePath():
\r
172 return os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../current_profile.ini"))
\r
174 def loadGlobalProfile(filename):
\r
175 #Read a configuration file as global config
\r
176 global globalProfileParser
\r
177 globalProfileParser = ConfigParser.ConfigParser()
\r
178 globalProfileParser.read(filename)
\r
180 def saveGlobalProfile(filename):
\r
181 #Save the current profile to an ini file
\r
182 globalProfileParser.write(open(filename, 'w'))
\r
184 def loadGlobalProfileFromString(options):
\r
185 global globalProfileParser
\r
186 globalProfileParser = ConfigParser.ConfigParser()
\r
187 globalProfileParser.add_section('profile')
\r
188 globalProfileParser.add_section('alterations')
\r
189 options = base64.b64decode(options)
\r
190 options = zlib.decompress(options)
\r
191 (profileOpts, alt) = options.split('\f', 1)
\r
192 for option in profileOpts.split('\b'):
\r
193 if len(option) > 0:
\r
194 (key, value) = option.split('=', 1)
\r
195 globalProfileParser.set('profile', key, value)
\r
196 for option in alt.split('\b'):
\r
197 if len(option) > 0:
\r
198 (key, value) = option.split('=', 1)
\r
199 globalProfileParser.set('alterations', key, value)
\r
201 def getGlobalProfileString():
\r
202 global globalProfileParser
\r
203 if not globals().has_key('globalProfileParser'):
\r
204 loadGlobalProfile(getDefaultProfilePath())
\r
209 if globalProfileParser.has_section('profile'):
\r
210 for key in globalProfileParser.options('profile'):
\r
211 if key in tempOverride:
\r
212 p.append(key + "=" + unicode(tempOverride[key]))
\r
213 tempDone.append(key)
\r
215 p.append(key + "=" + globalProfileParser.get('profile', key))
\r
216 if globalProfileParser.has_section('alterations'):
\r
217 for key in globalProfileParser.options('alterations'):
\r
218 if key in tempOverride:
\r
219 p.append(key + "=" + tempOverride[key])
\r
220 tempDone.append(key)
\r
222 alt.append(key + "=" + globalProfileParser.get('alterations', key))
\r
223 for key in tempOverride:
\r
224 if key not in tempDone:
\r
225 p.append(key + "=" + unicode(tempOverride[key]))
\r
226 ret = '\b'.join(p) + '\f' + '\b'.join(alt)
\r
227 ret = base64.b64encode(zlib.compress(ret, 9))
\r
230 def getProfileSetting(name):
\r
231 if name in tempOverride:
\r
232 return unicode(tempOverride[name])
\r
233 #Check if we have a configuration file loaded, else load the default.
\r
234 if not globals().has_key('globalProfileParser'):
\r
235 loadGlobalProfile(getDefaultProfilePath())
\r
236 if not globalProfileParser.has_option('profile', name):
\r
237 if name in profileDefaultSettings:
\r
238 default = profileDefaultSettings[name]
\r
240 print "Missing default setting for: '" + name + "'"
\r
241 profileDefaultSettings[name] = ''
\r
243 if not globalProfileParser.has_section('profile'):
\r
244 globalProfileParser.add_section('profile')
\r
245 globalProfileParser.set('profile', name, str(default))
\r
246 #print name + " not found in profile, so using default: " + str(default)
\r
248 return globalProfileParser.get('profile', name)
\r
250 def getProfileSettingFloat(name):
\r
252 return float(eval(getProfileSetting(name), {}, {}))
\r
253 except (ValueError, SyntaxError):
\r
256 def putProfileSetting(name, value):
\r
257 #Check if we have a configuration file loaded, else load the default.
\r
258 if not globals().has_key('globalProfileParser'):
\r
259 loadGlobalProfile(getDefaultProfilePath())
\r
260 if not globalProfileParser.has_section('profile'):
\r
261 globalProfileParser.add_section('profile')
\r
262 globalProfileParser.set('profile', name, str(value))
\r
264 def isProfileSetting(name):
\r
265 if name in profileDefaultSettings:
\r
269 ## Preferences functions
\r
270 global globalPreferenceParser
\r
271 globalPreferenceParser = None
\r
273 def getPreferencePath():
\r
274 return os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../preferences.ini"))
\r
276 def getPreferenceFloat(name):
\r
278 return float(eval(getPreference(name), {}, {}))
\r
279 except (ValueError, SyntaxError):
\r
282 def getPreference(name):
\r
283 if name in tempOverride:
\r
284 return unicode(tempOverride[name])
\r
285 global globalPreferenceParser
\r
286 if globalPreferenceParser == None:
\r
287 globalPreferenceParser = ConfigParser.ConfigParser()
\r
288 globalPreferenceParser.read(getPreferencePath())
\r
289 if not globalPreferenceParser.has_option('preference', name):
\r
290 if name in preferencesDefaultSettings:
\r
291 default = preferencesDefaultSettings[name]
\r
293 print "Missing default setting for: '" + name + "'"
\r
294 preferencesDefaultSettings[name] = ''
\r
296 if not globalPreferenceParser.has_section('preference'):
\r
297 globalPreferenceParser.add_section('preference')
\r
298 globalPreferenceParser.set('preference', name, str(default))
\r
299 #print name + " not found in preferences, so using default: " + str(default)
\r
301 return unicode(globalPreferenceParser.get('preference', name), "utf-8")
\r
303 def putPreference(name, value):
\r
304 #Check if we have a configuration file loaded, else load the default.
\r
305 global globalPreferenceParser
\r
306 if globalPreferenceParser == None:
\r
307 globalPreferenceParser = ConfigParser.ConfigParser()
\r
308 globalPreferenceParser.read(getPreferencePath())
\r
309 if not globalPreferenceParser.has_section('preference'):
\r
310 globalPreferenceParser.add_section('preference')
\r
311 globalPreferenceParser.set('preference', name, unicode(value).encode("utf-8"))
\r
312 globalPreferenceParser.write(open(getPreferencePath(), 'w'))
\r
314 def isPreference(name):
\r
315 if name in preferencesDefaultSettings:
\r
319 ## Temp overrides for multi-extruder slicing and the project planner.
\r
321 def setTempOverride(name, value):
\r
322 tempOverride[name] = value
\r
323 def resetTempOverride():
\r
324 tempOverride.clear()
\r
326 #########################################################
\r
327 ## Utility functions to calculate common profile values
\r
328 #########################################################
\r
329 def calculateEdgeWidth():
\r
330 wallThickness = getProfileSettingFloat('wall_thickness')
\r
331 nozzleSize = getProfileSettingFloat('nozzle_size')
\r
333 if wallThickness < nozzleSize:
\r
334 return wallThickness
\r
336 lineCount = int(wallThickness / nozzleSize)
\r
337 lineWidth = wallThickness / lineCount
\r
338 lineWidthAlt = wallThickness / (lineCount + 1)
\r
339 if lineWidth > nozzleSize * 1.5:
\r
340 return lineWidthAlt
\r
343 def calculateLineCount():
\r
344 wallThickness = getProfileSettingFloat('wall_thickness')
\r
345 nozzleSize = getProfileSettingFloat('nozzle_size')
\r
347 if wallThickness < nozzleSize:
\r
350 lineCount = int(wallThickness / nozzleSize + 0.0001)
\r
351 lineWidth = wallThickness / lineCount
\r
352 lineWidthAlt = wallThickness / (lineCount + 1)
\r
353 if lineWidth > nozzleSize * 1.5:
\r
354 return lineCount + 1
\r
357 def calculateSolidLayerCount():
\r
358 layerHeight = getProfileSettingFloat('layer_height')
\r
359 solidThickness = getProfileSettingFloat('solid_layer_thickness')
\r
360 return int(math.ceil(solidThickness / layerHeight - 0.0001))
\r
362 #########################################################
\r
363 ## Alteration file functions
\r
364 #########################################################
\r
365 def replaceTagMatch(m):
\r
366 tag = m.group(0)[1:-1]
\r
367 if tag in ['print_speed', 'retraction_speed', 'travel_speed', 'max_z_speed', 'bottom_layer_speed', 'cool_min_feedrate']:
\r
368 f = getProfileSettingFloat(tag) * 60
\r
369 elif isProfileSetting(tag):
\r
370 f = getProfileSettingFloat(tag)
\r
371 elif isPreference(tag):
\r
372 f = getProfileSettingFloat(tag)
\r
379 ### Get aleration raw contents. (Used internally in Cura)
\r
380 def getAlterationFile(filename):
\r
381 #Check if we have a configuration file loaded, else load the default.
\r
382 if not globals().has_key('globalProfileParser'):
\r
383 loadGlobalProfile(getDefaultProfilePath())
\r
385 if not globalProfileParser.has_option('alterations', filename):
\r
386 if filename in alterationDefault:
\r
387 default = alterationDefault[filename]
\r
389 print "Missing default alteration for: '" + filename + "'"
\r
390 alterationDefault[filename] = ''
\r
392 if not globalProfileParser.has_section('alterations'):
\r
393 globalProfileParser.add_section('alterations')
\r
394 #print "Using default for: %s" % (filename)
\r
395 globalProfileParser.set('alterations', filename, default)
\r
396 return unicode(globalProfileParser.get('alterations', filename), "utf-8")
\r
398 def setAlterationFile(filename, value):
\r
399 #Check if we have a configuration file loaded, else load the default.
\r
400 if not globals().has_key('globalProfileParser'):
\r
401 loadGlobalProfile(getDefaultProfilePath())
\r
402 if not globalProfileParser.has_section('alterations'):
\r
403 globalProfileParser.add_section('alterations')
\r
404 globalProfileParser.set('alterations', filename, value.encode("utf-8"))
\r
405 saveGlobalProfile(getDefaultProfilePath())
\r
407 ### Get the alteration file for output. (Used by Skeinforge)
\r
408 def getAlterationFileContents(filename):
\r
410 alterationContents = getAlterationFile(filename)
\r
411 if filename == 'start.gcode':
\r
412 #For the start code, hack the temperature and the steps per E value into it. So the temperature is reached before the start code extrusion.
\r
413 #We also set our steps per E here, if configured.
\r
414 eSteps = getPreferenceFloat('steps_per_e')
\r
416 prefix += 'M92 E%f\n' % (eSteps)
\r
417 temp = getProfileSettingFloat('print_temperature')
\r
418 if temp > 0 and not '{print_temperature}' in alterationContents:
\r
419 prefix += 'M109 S%f\n' % (temp)
\r
420 elif filename == 'replace.csv':
\r
421 #Always remove the extruder on/off M codes. These are no longer needed in 5D printing.
\r
422 prefix = 'M101\nM103\n'
\r
424 return unicode(prefix + re.sub("\{[^\}]*\}", replaceTagMatch, alterationContents).rstrip() + '\n').encode('utf-8')
\r