1 from __future__ import absolute_import
\r
2 from __future__ import division
\r
3 #Init has to be imported first because it has code to workaround the python bug where relative imports don't work if the module is imported as a main module.
\r
6 import ConfigParser, os, traceback, math, re, zlib, base64
\r
8 #########################################################
\r
9 ## Default settings when none are found.
\r
10 #########################################################
\r
12 #Single place to store the defaults, so we have a consistent set of default settings.
\r
13 profileDefaultSettings = {
\r
14 'nozzle_size': '0.4',
\r
15 'layer_height': '0.2',
\r
16 'wall_thickness': '0.8',
\r
17 'solid_layer_thickness': '0.6',
\r
18 'fill_density': '20',
\r
19 'skirt_line_count': '1',
\r
21 'print_speed': '50',
\r
22 'print_temperature': '0',
\r
24 'filament_diameter': '2.89',
\r
25 'filament_density': '1.00',
\r
26 'machine_center_x': '100',
\r
27 'machine_center_y': '100',
\r
28 'retraction_min_travel': '5.0',
\r
29 'retraction_speed': '40.0',
\r
30 'retraction_amount': '0.0',
\r
31 'retraction_extra': '0.0',
\r
32 'travel_speed': '150',
\r
33 'max_z_speed': '3.0',
\r
34 'bottom_layer_speed': '20',
\r
35 'cool_min_layer_time': '10',
\r
36 'fan_enabled': 'True',
\r
39 'model_scale': '1.0',
\r
45 'model_rotate_base': '0',
\r
46 'model_multiply_x': '1',
\r
47 'model_multiply_y': '1',
\r
48 'extra_base_wall_thickness': '0.0',
\r
49 'sequence': 'Loops > Perimeter > Infill',
\r
50 'force_first_layer_sequence': 'True',
\r
51 'infill_type': 'Line',
\r
52 'solid_top': 'True',
\r
53 'fill_overlap': '15',
\r
54 'support_rate': '50',
\r
55 'support_distance': '0.5',
\r
56 'support_margin': '3.0',
\r
58 'enable_skin': 'False',
\r
59 'enable_raft': 'False',
\r
60 'cool_min_feedrate': '5',
\r
61 'bridge_speed': '100',
\r
62 'bridge_material_amount': '100',
\r
64 'raft_base_material_amount': '100',
\r
65 'raft_interface_material_amount': '100',
\r
66 'bottom_thickness': '0.3',
\r
68 'add_start_end_gcode': 'True',
\r
69 'gcode_extension': 'gcode',
\r
71 alterationDefault = {
\r
72 #######################################################################################
\r
73 'start.gcode': """;Start GCode
\r
75 G90 ;absolute positioning
\r
77 G28 X0 Y0 ;move X/Y to min endstops
\r
78 G28 Z0 ;move Z to min endstops
\r
80 ; if your prints start too high, try changing the Z0.0 below
\r
81 ; to Z1.0 - the number after the Z is the actual, physical
\r
82 ; height of the nozzle in mm. This can take some messing around
\r
83 ; with to get just right...
\r
84 G92 X0 Y0 Z0 E0 ;reset software position to front/left/z=0.0
\r
85 G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
\r
86 G92 E0 ;zero the extruded length
\r
88 G1 F200 E5 ;extrude 5mm of feed stock
\r
89 G1 F200 E3.5 ;reverse feed stock by 1.5mm
\r
90 G92 E0 ;zero the extruded length again
\r
92 ;go to the middle of the platform, and move to Z=0 before starting the print.
\r
93 G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
\r
94 G1 Z0.0 F{max_z_speed}
\r
96 #######################################################################################
\r
97 'end.gcode': """;End GCode
\r
98 M104 S0 ;extruder heat off
\r
99 G91 ;relative positioning
\r
100 G1 Z+10 E-5 F{max_z_speed} ;move Z up a bit and retract filament by 5mm
\r
101 G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
\r
103 G90 ;absolute positioning
\r
105 #######################################################################################
\r
106 'support_start.gcode': '',
\r
107 'support_end.gcode': '',
\r
108 'cool_start.gcode': '',
\r
109 'cool_end.gcode': '',
\r
111 #######################################################################################
\r
112 'nextobject.gcode': """;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
\r
114 G1 Z{clear_z} E-5 F{max_z_speed}
\r
116 G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
\r
119 G1 Z0 F{max_z_speed}
\r
121 #######################################################################################
\r
123 preferencesDefaultSettings = {
\r
124 'wizardDone': 'False',
\r
125 'startMode': 'Simple',
\r
126 'lastFile': 'None',
\r
127 'machine_width': '205',
\r
128 'machine_depth': '205',
\r
129 'machine_height': '200',
\r
130 'filament_density': '1300',
\r
131 'steps_per_e': '0',
\r
132 'serial_port': 'AUTO',
\r
133 'serial_baud': '250000',
\r
134 'slicer': 'Cura (Skeinforge based)',
\r
135 'save_profile': 'False',
\r
136 'filament_cost_kg': '0',
\r
137 'filament_cost_meter': '0',
\r
140 #########################################################
\r
141 ## Profile and preferences functions
\r
142 #########################################################
\r
144 def getDefaultProfilePath():
\r
145 return os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../current_profile.ini"))
\r
147 def loadGlobalProfile(filename):
\r
148 #Read a configuration file as global config
\r
149 global globalProfileParser
\r
150 globalProfileParser = ConfigParser.ConfigParser()
\r
151 globalProfileParser.read(filename)
\r
153 def saveGlobalProfile(filename):
\r
154 #Save the current profile to an ini file
\r
155 globalProfileParser.write(open(filename, 'w'))
\r
157 def loadGlobalProfileFromString(options):
\r
158 global globalProfileParser
\r
159 globalProfileParser = ConfigParser.ConfigParser()
\r
160 globalProfileParser.add_section('profile')
\r
161 globalProfileParser.add_section('alterations')
\r
162 options = base64.b64decode(options)
\r
163 options = zlib.decompress(options)
\r
164 (profileOpts, alt) = options.split('\f', 1)
\r
165 for option in profileOpts.split('\b'):
\r
166 (key, value) = option.split('=', 1)
\r
167 globalProfileParser.set('profile', key, value)
\r
168 for option in alt.split('\b'):
\r
169 (key, value) = option.split('=', 1)
\r
170 globalProfileParser.set('alterations', key, value)
\r
172 def getGlobalProfileString():
\r
173 global globalProfileParser
\r
174 if not globals().has_key('globalProfileParser'):
\r
175 loadGlobalProfile(getDefaultProfilePath())
\r
179 for key in globalProfileParser.options('profile'):
\r
180 p.append(key + "=" + globalProfileParser.get('profile', key))
\r
181 for key in globalProfileParser.options('alterations'):
\r
182 alt.append(key + "=" + globalProfileParser.get('alterations', key))
\r
183 ret = '\b'.join(p) + '\f' + '\b'.join(alt)
\r
184 ret = base64.b64encode(zlib.compress(ret, 9))
\r
187 def getProfileSetting(name):
\r
188 #Check if we have a configuration file loaded, else load the default.
\r
189 if not globals().has_key('globalProfileParser'):
\r
190 loadGlobalProfile(getDefaultProfilePath())
\r
191 if not globalProfileParser.has_option('profile', name):
\r
192 if name in profileDefaultSettings:
\r
193 default = profileDefaultSettings[name]
\r
195 print "Missing default setting for: '" + name + "'"
\r
196 profileDefaultSettings[name] = ''
\r
198 if not globalProfileParser.has_section('profile'):
\r
199 globalProfileParser.add_section('profile')
\r
200 globalProfileParser.set('profile', name, str(default))
\r
201 #print name + " not found in profile, so using default: " + str(default)
\r
203 return globalProfileParser.get('profile', name)
\r
205 def getProfileSettingFloat(name):
\r
207 return float(eval(getProfileSetting(name), {}, {}))
\r
208 except (ValueError, SyntaxError):
\r
211 def putProfileSetting(name, value):
\r
212 #Check if we have a configuration file loaded, else load the default.
\r
213 if not globals().has_key('globalProfileParser'):
\r
214 loadGlobalProfile(getDefaultProfilePath())
\r
215 if not globalProfileParser.has_section('profile'):
\r
216 globalProfileParser.add_section('profile')
\r
217 globalProfileParser.set('profile', name, str(value))
\r
219 global globalPreferenceParser
\r
220 globalPreferenceParser = None
\r
222 def getPreferencePath():
\r
223 return os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../preferences.ini"))
\r
225 def getPreference(name):
\r
226 global globalPreferenceParser
\r
227 if globalPreferenceParser == None:
\r
228 globalPreferenceParser = ConfigParser.ConfigParser()
\r
229 globalPreferenceParser.read(getPreferencePath())
\r
230 if not globalPreferenceParser.has_option('preference', name):
\r
231 if name in preferencesDefaultSettings:
\r
232 default = preferencesDefaultSettings[name]
\r
234 print "Missing default setting for: '" + name + "'"
\r
235 preferencesDefaultSettings[name] = ''
\r
237 if not globalPreferenceParser.has_section('preference'):
\r
238 globalPreferenceParser.add_section('preference')
\r
239 globalPreferenceParser.set('preference', name, str(default))
\r
240 #print name + " not found in preferences, so using default: " + str(default)
\r
242 return unicode(globalPreferenceParser.get('preference', name), "utf-8")
\r
244 def putPreference(name, value):
\r
245 #Check if we have a configuration file loaded, else load the default.
\r
246 global globalPreferenceParser
\r
247 if globalPreferenceParser == None:
\r
248 globalPreferenceParser = ConfigParser.ConfigParser()
\r
249 globalPreferenceParser.read(getPreferencePath())
\r
250 if not globalPreferenceParser.has_section('preference'):
\r
251 globalPreferenceParser.add_section('preference')
\r
252 globalPreferenceParser.set('preference', name, unicode(value).encode("utf-8"))
\r
253 globalPreferenceParser.write(open(getPreferencePath(), 'w'))
\r
255 #########################################################
\r
256 ## Utility functions to calculate common profile values
\r
257 #########################################################
\r
258 def calculateEdgeWidth():
\r
259 wallThickness = getProfileSettingFloat('wall_thickness')
\r
260 nozzleSize = getProfileSettingFloat('nozzle_size')
\r
262 if wallThickness < nozzleSize:
\r
263 return wallThickness
\r
265 lineCount = int(wallThickness / nozzleSize)
\r
266 lineWidth = wallThickness / lineCount
\r
267 lineWidthAlt = wallThickness / (lineCount + 1)
\r
268 if lineWidth > nozzleSize * 1.5:
\r
269 return lineWidthAlt
\r
272 def calculateLineCount():
\r
273 wallThickness = getProfileSettingFloat('wall_thickness')
\r
274 nozzleSize = getProfileSettingFloat('nozzle_size')
\r
276 if wallThickness < nozzleSize:
\r
279 lineCount = int(wallThickness / nozzleSize + 0.0001)
\r
280 lineWidth = wallThickness / lineCount
\r
281 lineWidthAlt = wallThickness / (lineCount + 1)
\r
282 if lineWidth > nozzleSize * 1.5:
\r
283 return lineCount + 1
\r
286 def calculateSolidLayerCount():
\r
287 layerHeight = getProfileSettingFloat('layer_height')
\r
288 solidThickness = getProfileSettingFloat('solid_layer_thickness')
\r
289 return int(math.ceil(solidThickness / layerHeight - 0.0001))
\r
291 #########################################################
\r
292 ## Alteration file functions
\r
293 #########################################################
\r
294 def replaceTagMatch(m):
\r
295 tag = m.group(0)[1:-1]
\r
296 if tag in ['print_speed', 'retraction_speed', 'travel_speed', 'max_z_speed', 'bottom_layer_speed', 'cool_min_feedrate']:
\r
297 return str(getProfileSettingFloat(tag) * 60)
\r
298 return str(getProfileSettingFloat(tag))
\r
300 ### Get aleration raw contents. (Used internally in Cura)
\r
301 def getAlterationFile(filename):
\r
302 #Check if we have a configuration file loaded, else load the default.
\r
303 if not globals().has_key('globalProfileParser'):
\r
304 loadGlobalProfile(getDefaultProfilePath())
\r
306 if not globalProfileParser.has_option('alterations', filename):
\r
307 if filename in alterationDefault:
\r
308 default = alterationDefault[filename]
\r
310 print "Missing default alteration for: '" + filename + "'"
\r
311 alterationDefault[filename] = ''
\r
313 if not globalProfileParser.has_section('alterations'):
\r
314 globalProfileParser.add_section('alterations')
\r
315 #print "Using default for: %s" % (filename)
\r
316 globalProfileParser.set('alterations', filename, default)
\r
317 return unicode(globalProfileParser.get('alterations', filename), "utf-8")
\r
319 def setAlterationFile(filename, value):
\r
320 #Check if we have a configuration file loaded, else load the default.
\r
321 if not globals().has_key('globalProfileParser'):
\r
322 loadGlobalProfile(getDefaultProfilePath())
\r
323 if not globalProfileParser.has_section('alterations'):
\r
324 globalProfileParser.add_section('alterations')
\r
325 globalProfileParser.set('alterations', filename, value.encode("utf-8"))
\r
326 saveGlobalProfile(getDefaultProfilePath())
\r
328 ### Get the alteration file for output. (Used by Skeinforge)
\r
329 def getAlterationFileContents(filename):
\r
331 alterationContents = getAlterationFile(filename)
\r
332 if filename == 'start.gcode':
\r
333 #For the start code, hack the temperature and the steps per E value into it. So the temperature is reached before the start code extrusion.
\r
334 #We also set our steps per E here, if configured.
\r
335 eSteps = float(getPreference('steps_per_e'))
\r
337 prefix += 'M92 E%f\n' % (eSteps)
\r
338 temp = getProfileSettingFloat('print_temperature')
\r
339 if temp > 0 and not '{print_temperature}' in alterationContents:
\r
340 prefix += 'M109 S%f\n' % (temp)
\r
341 elif filename == 'replace.csv':
\r
342 #Always remove the extruder on/off M codes. These are no longer needed in 5D printing.
\r
343 prefix = 'M101\nM103\n'
\r
345 return prefix + re.sub("\{[^\}]*\}", replaceTagMatch, alterationContents)
\r