1 # SOME DESCRIPTIVE TITLE.
3 # This file is distributed under the same license as the Cura package.
4 # Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
9 "Project-Id-Version: Cura\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2013-09-15 15:40+0700\n"
12 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
13 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
14 "Language-Team: LANGUAGE <LL@li.org>\n"
17 "Content-Type: text/plain; charset=UTF-8\n"
18 "Content-Transfer-Encoding: 8bit\n"
20 #: gui/app.py:82 gui/mainWindow.py:413
21 msgid "A new version of Cura is available, would you like to download?"
24 #: gui/app.py:82 gui/mainWindow.py:413
25 msgid "New version available"
28 #: gui/tools/batchRun.py:14
29 msgid "Cura - Batch run"
32 #: gui/tools/batchRun.py:29
36 #: gui/tools/batchRun.py:30
40 #: gui/tools/batchRun.py:31
44 #: gui/tools/batchRun.py:47
45 msgid "Open file to batch prepare"
48 #: gui/tools/batchRun.py:134
49 #, possible-python-format
53 #: gui/tools/batchRun.py:137
54 #, possible-python-format
58 #: gui/tools/batchRun.py:140
62 #: gui/tools/batchRun.py:163 gui/tools/batchRun.py:233
66 #: gui/tools/batchRun.py:187
67 #, possible-python-format
68 msgid "Build: %d models"
71 #: gui/tools/batchRun.py:188
72 #, possible-python-format
75 "Slicing took: %(hours)02d:%(minutes)02d"
78 #: gui/tools/batchRun.py:198
79 #, possible-python-format
80 msgid "Building: [%(index)d/%(size)d]"
83 #: gui/tools/batchRun.py:214
84 msgid "Aborted by user."
87 #: gui/tools/batchRun.py:228
88 #, possible-python-format
89 msgid "Done %(index)d/%(size)d"
92 #: gui/tools/batchRun.py:236
96 #: gui/configWizard.py:218
97 msgid "First time run wizard"
100 #: gui/configWizard.py:219
101 msgid "Welcome, and thanks for trying Cura!"
104 #: gui/configWizard.py:221
105 msgid "This wizard will help you with the following steps:"
108 #: gui/configWizard.py:222
109 msgid "* Configure Cura for your machine"
112 #: gui/configWizard.py:223
113 msgid "* Upgrade your firmware"
116 #: gui/configWizard.py:224
117 msgid "* Check if your machine is working safely"
120 #: gui/configWizard.py:225
121 msgid "* Level your printer bed"
124 #: gui/configWizard.py:235
126 "RepRap machines are vastly different, and there is no\n"
127 "default configuration in Cura for any of them."
130 #: gui/configWizard.py:236
132 "If you like a default profile for your machine added,\n"
133 "then make an issue on github."
136 #: gui/configWizard.py:238
137 msgid "You will have to manually install Marlin or Sprinter firmware."
140 #: gui/configWizard.py:240
141 msgid "Machine width (mm)"
144 #: gui/configWizard.py:241
145 msgid "Machine depth (mm)"
148 #: gui/configWizard.py:242
149 msgid "Machine height (mm)"
152 #: gui/configWizard.py:243 util/profile.py:119
153 msgid "Nozzle size (mm)"
156 #: gui/configWizard.py:244
160 #: gui/configWizard.py:245
161 msgid "Bed center is 0,0,0 (RoStock)"
164 #: gui/configWizard.py:264
165 msgid "Select your machine"
168 #: gui/configWizard.py:265
169 msgid "What kind of machine do you have:"
172 #: gui/configWizard.py:270
173 msgid "Other (Ex: RepRap)"
176 #: gui/configWizard.py:273
178 "The collection of anonymous usage information helps with the continued "
179 "improvement of Cura."
182 #: gui/configWizard.py:274
184 "This does NOT submit your models online nor gathers any privacy related "
188 #: gui/configWizard.py:275
189 msgid "Submit anonymous usage information:"
192 #: gui/configWizard.py:276
193 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
196 #: gui/configWizard.py:313
197 msgid "Select upgraded parts you have"
200 #: gui/configWizard.py:314
202 "To assist you in having better default settings for your Ultimaker\n"
203 "Cura would like to know which upgrades you have in your machine."
206 #: gui/configWizard.py:316
207 msgid "Extruder drive upgrade"
210 #: gui/configWizard.py:317
211 msgid "Heated printer bed (self built)"
214 #: gui/configWizard.py:318
215 msgid "Dual extrusion (experimental)"
218 #: gui/configWizard.py:320
220 "If you have an Ultimaker bought after october 2012 you will have the\n"
221 "Extruder drive upgrade. If you do not have this upgrade,\n"
222 "it is highly recommended to improve reliability."
225 #: gui/configWizard.py:321
227 "This upgrade can be bought from the Ultimaker webshop\n"
228 "or found on thingiverse as thing:26094"
231 #: gui/configWizard.py:341
233 "Firmware is the piece of software running directly on your 3D printer.\n"
234 "This firmware controls the step motors, regulates the temperature\n"
235 "and ultimately makes your printer work."
238 #: gui/configWizard.py:343
240 "The firmware shipping with new Ultimakers works, but upgrades\n"
241 "have been made to make better prints, and make calibration easier."
244 #: gui/configWizard.py:345
246 "Cura requires these new features and thus\n"
247 "your firmware will most likely need to be upgraded.\n"
248 "You will get the chance to do so now."
251 #: gui/configWizard.py:350
252 msgid "Do not upgrade to this firmware if:"
255 #: gui/configWizard.py:351
256 msgid "* You have an older machine based on ATMega1280"
259 #: gui/configWizard.py:352
260 msgid "* Have other changes in the firmware"
263 #: gui/configWizard.py:387
265 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"
266 "You can skip these if you know your machine is functional."
269 #: gui/configWizard.py:388
273 #: gui/configWizard.py:388
277 #: gui/configWizard.py:392
278 msgid "Communication:"
281 #: gui/configWizard.py:393
285 #: gui/configWizard.py:394
289 #: gui/configWizard.py:399
290 msgid "Show error log"
293 #: gui/configWizard.py:433
294 msgid "Connecting to machine."
297 #: gui/configWizard.py:454
298 msgid "Cooldown before temperature check."
301 #: gui/configWizard.py:460 gui/configWizard.py:467
302 msgid "Checking the heater and temperature sensor."
305 #: gui/configWizard.py:478
306 msgid "Please make sure none of the endstops are pressed."
309 #: gui/configWizard.py:491
310 msgid "Temperature measurement FAILED!"
313 #: gui/configWizard.py:496
314 #, possible-python-format
315 msgid "Head temperature: %d"
318 #: gui/configWizard.py:503 gui/configWizard.py:512
319 #, possible-python-format
320 msgid "Communication State: %s"
323 #: gui/configWizard.py:506
324 msgid "Failed to establish connection with the printer."
327 #: gui/configWizard.py:551
328 msgid "Please press the right X endstop."
331 #: gui/configWizard.py:556
332 msgid "Please press the left X endstop."
335 #: gui/configWizard.py:561
336 msgid "Please press the front Y endstop."
339 #: gui/configWizard.py:566
340 msgid "Please press the back Y endstop."
343 #: gui/configWizard.py:571
344 msgid "Please press the top Z endstop."
347 #: gui/configWizard.py:576
348 msgid "Please press the bottom Z endstop."
351 #: gui/configWizard.py:582
352 msgid "Checkup finished"
355 #: gui/configWizard.py:625
356 msgid "Calibrating the Steps Per E requires some manual actions."
359 #: gui/configWizard.py:626
360 msgid "First remove any filament from your machine."
363 #: gui/configWizard.py:627
365 "Next put in your filament so the tip is aligned with the\n"
366 "top of the extruder drive."
369 #: gui/configWizard.py:628
370 msgid "We'll push the filament 100mm"
373 #: gui/configWizard.py:629
374 msgid "Extrude 100mm filament"
377 #: gui/configWizard.py:630
379 "Now measure the amount of extruded filament:\n"
380 "(this can be more or less then 100mm)"
383 #: gui/configWizard.py:631
387 #: gui/configWizard.py:632
388 msgid "This results in the following steps per E:"
391 #: gui/configWizard.py:634
392 msgid "You can repeat these steps to get better calibration."
395 #: gui/configWizard.py:637
397 "If you still have filament in your printer which needs\n"
398 "heat to remove, press the heat up button below:"
401 #: gui/configWizard.py:638
402 msgid "Heatup for filament removal"
405 #: gui/configWizard.py:661 gui/configWizard.py:693
407 "Error: Failed to open serial port to machine\n"
408 "If this keeps happening, try disconnecting and reconnecting the USB cable"
411 #: gui/firmwareInstall.py:39
413 "I am sorry, but Cura does not ship with a default firmware for your machine "
417 #: gui/firmwareInstall.py:39 gui/firmwareInstall.py:98 gui/mainWindow.py:375
418 msgid "Firmware update"
421 #: gui/firmwareInstall.py:49
425 #: gui/firmwareInstall.py:68
426 msgid "Reading firmware..."
429 #: gui/firmwareInstall.py:70
430 msgid "Connecting to machine..."
433 #: gui/firmwareInstall.py:87
434 msgid "Uploading firmware..."
437 #: gui/firmwareInstall.py:90
438 #, possible-python-format
441 "Installed firmware: %s"
444 #: gui/firmwareInstall.py:92
445 msgid "Failed to write firmware.\n"
448 #: gui/firmwareInstall.py:97
450 "Failed to find machine for firmware upgrade\n"
451 "Is your machine connected to the PC?"
454 #: gui/mainWindow.py:55
455 msgid "Load model file...\tCTRL+L"
458 #: gui/mainWindow.py:57
459 msgid "Save model...\tCTRL+S"
462 #: gui/mainWindow.py:59
463 msgid "Clear platform"
466 #: gui/mainWindow.py:63
467 msgid "Print...\tCTRL+P"
470 #: gui/mainWindow.py:65 gui/sceneView.py:195
471 msgid "Save GCode..."
474 #: gui/mainWindow.py:67
475 msgid "Show slice engine log..."
478 #: gui/mainWindow.py:71
479 msgid "Open Profile..."
482 #: gui/mainWindow.py:74
483 msgid "Save Profile..."
486 #: gui/mainWindow.py:77
487 msgid "Load Profile from GCode..."
490 #: gui/mainWindow.py:81
491 msgid "Reset Profile to default"
494 #: gui/mainWindow.py:86
495 msgid "Preferences...\tCTRL+,"
498 #: gui/mainWindow.py:92
499 msgid "&Recent Model Files"
502 #: gui/mainWindow.py:99
503 msgid "&Recent Profile Files"
506 #: gui/mainWindow.py:105
510 #: gui/mainWindow.py:107
514 #: gui/mainWindow.py:110
515 msgid "Switch to quickprint..."
518 #: gui/mainWindow.py:113
519 msgid "Switch to full settings..."
522 #: gui/mainWindow.py:121
523 msgid "Minecraft import..."
526 #: gui/mainWindow.py:124
527 msgid "PID Debugger..."
530 #: gui/mainWindow.py:126
534 #: gui/mainWindow.py:129
535 msgid "Open expert settings..."
538 #: gui/mainWindow.py:134
539 msgid "Install default Marlin firmware"
542 #: gui/mainWindow.py:136
543 msgid "Install custom firmware"
546 #: gui/mainWindow.py:139
547 msgid "Run first run wizard..."
550 #: gui/mainWindow.py:141
551 msgid "Run bed leveling wizard..."
554 #: gui/mainWindow.py:144
555 msgid "Run head offset wizard..."
558 #: gui/mainWindow.py:146
562 #: gui/mainWindow.py:149
563 msgid "Online documentation..."
566 #: gui/mainWindow.py:151
567 msgid "Report a problem..."
570 #: gui/mainWindow.py:153
571 msgid "Check for update..."
574 #: gui/mainWindow.py:155
575 msgid "Open YouMagine website..."
578 #: gui/mainWindow.py:157
579 msgid "About Cura..."
582 #: gui/mainWindow.py:159
586 #: gui/mainWindow.py:318
587 msgid "Select profile file to load"
590 #: gui/mainWindow.py:330
591 msgid "Select gcode file to load profile from"
594 #: gui/mainWindow.py:343
596 "No profile found in GCode file.\n"
597 "This feature only works with GCode files made by Cura 12.07 or newer."
600 #: gui/mainWindow.py:343
601 msgid "Profile load error"
604 #: gui/mainWindow.py:347
605 msgid "Select profile file to save"
608 #: gui/mainWindow.py:355
610 "This will reset all profile settings to defaults.\n"
611 "Unless you have saved your current profile, all settings will be lost!\n"
612 "Do you really want to reset?"
615 #: gui/mainWindow.py:355
616 msgid "Profile reset"
619 #: gui/mainWindow.py:375
621 "Warning: Installing a custom firmware does not guarantee that you machine "
622 "will function correctly, and could damage your machine."
625 #: gui/mainWindow.py:376
626 msgid "Open firmware to upload"
629 #: gui/mainWindow.py:416
630 msgid "You are running the latest version of Cura!"
633 #: gui/mainWindow.py:416
637 #: gui/mainWindow.py:421
638 msgid "End solution for Open Source Fused Filament Fabrication 3D printing."
641 #: gui/mainWindow.py:423
642 msgid "Copyright (C) David Braam"
645 #: gui/util/openglGui.py:239
646 msgid "An error has occurred during the 3D view drawing."
649 #: gui/util/openglGui.py:246
650 msgid "3D window error"
653 #: gui/pluginPanel.py:26
657 #: gui/pluginPanel.py:30
658 msgid "Open plugin location"
661 #: gui/pluginPanel.py:31
662 msgid "Enabled plugins"
665 #: gui/pluginPanel.py:133
666 msgid "You need to select a plugin before you can add anything."
669 #: gui/pluginPanel.py:133
670 msgid "Error: no plugin selected"
673 #: gui/preferencesDialog.py:23
674 msgid "Machine settings"
677 #: gui/preferencesDialog.py:32
678 msgid "Printer head size"
681 #: gui/preferencesDialog.py:40
682 #, possible-python-format
686 #: gui/preferencesDialog.py:44
690 #: gui/preferencesDialog.py:49
691 msgid "Filament settings"
694 #: gui/preferencesDialog.py:54
695 msgid "Communication settings"
698 #: gui/preferencesDialog.py:63
699 msgid "Cura settings"
702 #: gui/preferencesDialog.py:77
704 "After changing the amount of extruders you need to restart Cura for full "
708 #: gui/preferencesDialog.py:77
709 msgid "Extruder amount warning."
712 #: gui/printWindow.py:127
716 #: gui/printWindow.py:156
720 #: gui/printWindow.py:161
722 "Your computer is running on battery power.\n"
723 "Connect your computer to AC power or your print might not finish."
726 #: gui/printWindow.py:172
728 "Filament: ####.##m #.##g\n"
729 "Estimated print time: #####:##\n"
731 "Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
734 #: gui/printWindow.py:177
738 #: gui/printWindow.py:179 gui/sceneView.py:64 gui/sceneView.py:745
742 #: gui/printWindow.py:180 gui/printWindow.py:417
746 #: gui/printWindow.py:181
750 #: gui/printWindow.py:182
754 #: gui/printWindow.py:203
758 #: gui/printWindow.py:211
762 #: gui/printWindow.py:259
766 #: gui/printWindow.py:274
770 #: gui/printWindow.py:277
774 #: gui/printWindow.py:280
778 #: gui/printWindow.py:283
782 #: gui/printWindow.py:287
786 #: gui/printWindow.py:305
790 #: gui/printWindow.py:312
791 msgid "Enable timelapse movie recording"
794 #: gui/printWindow.py:326
798 #: gui/printWindow.py:332
802 #: gui/printWindow.py:415
806 #: gui/printWindow.py:432
807 msgid "Loading gcode...\n"
810 #: gui/printWindow.py:434
811 #, possible-python-format
812 msgid "Filament: %(amount).2fm %(weight).2fg\n"
815 #: gui/printWindow.py:438
816 #, possible-python-format
817 msgid "Filament cost: %s\n"
820 #: gui/sceneView.py:63
824 #: gui/sceneView.py:68
828 #: gui/sceneView.py:69
832 #: gui/sceneView.py:70
836 #: gui/sceneView.py:72 gui/sceneView.py:75
840 #: gui/sceneView.py:73
844 #: gui/sceneView.py:76
848 #: gui/sceneView.py:78
852 #: gui/sceneView.py:79
856 #: gui/sceneView.py:80
860 #: gui/sceneView.py:88
864 #: gui/sceneView.py:90
868 #: gui/sceneView.py:92
872 #: gui/sceneView.py:94
876 #: gui/sceneView.py:96
880 #: gui/sceneView.py:98
884 #: gui/sceneView.py:100
885 msgid "Uniform scale"
888 #: gui/sceneView.py:103
892 #: gui/sceneView.py:103
896 #: gui/sceneView.py:103
900 #: gui/sceneView.py:103
904 #: gui/sceneView.py:103
908 #: gui/sceneView.py:103
912 #: gui/sceneView.py:106
913 msgid "Share on YouMagine"
916 #: gui/sceneView.py:124
917 msgid "Open 3D model"
920 #: gui/sceneView.py:164
921 msgid "Save 3D model"
924 #: gui/sceneView.py:194
925 msgid "Print with USB"
928 #: gui/sceneView.py:196
929 msgid "Slice engine log..."
932 #: gui/sceneView.py:210 gui/sceneView.py:751
933 msgid "Save toolpath"
936 #: gui/sceneView.py:247
937 msgid "The slicing engine reported the following"
940 #: gui/sceneView.py:247
941 msgid "Engine log..."
944 #: gui/sceneView.py:617
948 #: gui/sceneView.py:618
952 #: gui/sceneView.py:619
956 #: gui/sceneView.py:621
957 msgid "Dual extrusion merge"
960 #: gui/sceneView.py:623
964 #: gui/sceneView.py:748
965 msgid "Toolpath to SD"
968 #: gui/sceneView.py:1058
969 msgid "Loading toolpath for visualization..."
972 #: gui/sceneView.py:1109
973 msgid "Overhang view not working due to lack of OpenGL shaders support."
976 #: gui/simpleMode.py:20
977 msgid "High quality print"
980 #: gui/simpleMode.py:21
981 msgid "Normal quality print"
984 #: gui/simpleMode.py:22
985 msgid "Fast low quality print"
988 #: gui/simpleMode.py:23
989 msgid "Thin walled cup or vase"
992 #: gui/simpleMode.py:31
993 msgid "Print support structure"
996 #: gui/simpleMode.py:36
997 msgid "Select a print type:"
1000 #: gui/simpleMode.py:46
1004 #: gui/simpleMode.py:50
1008 #: gui/simpleMode.py:56
1012 #: gui/simpleMode.py:117
1013 msgid "Exterior Only"
1016 #: gui/tools/youmagineGui.py:79
1017 msgid "Checking token"
1020 #: gui/tools/youmagineGui.py:83
1021 msgid "Failed to contact YouMagine.com"
1024 #: gui/tools/youmagineGui.py:83 gui/tools/youmagineGui.py:116
1025 #: gui/tools/youmagineGui.py:133 gui/tools/youmagineGui.py:140
1026 #: gui/tools/youmagineGui.py:148 gui/tools/youmagineGui.py:153
1027 msgid "YouMagine error."
1030 #: gui/tools/youmagineGui.py:100
1031 msgid "Cura is now authorized to share on YouMagine"
1034 #: gui/tools/youmagineGui.py:100
1038 #: gui/tools/youmagineGui.py:112
1039 msgid "Creating new design on YouMagine..."
1042 #: gui/tools/youmagineGui.py:116
1043 msgid "Failed to create a design, nothing uploaded!"
1046 #: gui/tools/youmagineGui.py:120
1047 #, possible-python-format
1048 msgid "Building model %s..."
1051 #: gui/tools/youmagineGui.py:131
1052 #, possible-python-format
1053 msgid "Uploading model %s..."
1056 #: gui/tools/youmagineGui.py:133 gui/tools/youmagineGui.py:140
1057 #: gui/tools/youmagineGui.py:148
1058 #, possible-python-format
1059 msgid "Failed to upload %s!"
1062 #: gui/tools/youmagineGui.py:137
1063 #, possible-python-format
1064 msgid "Uploading file %s..."
1067 #: gui/tools/youmagineGui.py:145
1068 #, possible-python-format
1069 msgid "Uploading image %s..."
1072 #: gui/tools/youmagineGui.py:153
1073 msgid "Failed to upload snapshot!"
1076 #: gui/tools/youmagineGui.py:158
1077 msgid "Publishing design..."
1080 #: gui/tools/youmagineGui.py:230
1081 msgid "Request authorization from YouMagine"
1084 #: gui/tools/youmagineGui.py:231
1085 msgid "Paste token here"
1088 #: gui/tools/youmagineGui.py:237
1090 "To share your designs on YouMagine\n"
1091 "you need an account on YouMagine.com\n"
1092 "and authorize Cura to access your account."
1095 #: gui/tools/youmagineGui.py:239
1097 "This will open a browser window where you can\n"
1098 "authorize Cura to access your YouMagine account.\n"
1099 "You can revoke access at any time\n"
1100 "from YouMagine.com"
1103 #: gui/tools/youmagineGui.py:274
1107 #: gui/tools/youmagineGui.py:278
1108 msgid "Publish after upload"
1111 #: gui/tools/youmagineGui.py:279
1115 #: gui/tools/youmagineGui.py:287
1119 #: gui/tools/youmagineGui.py:289
1123 #: gui/tools/youmagineGui.py:297
1125 "Directly publish the design after uploading.\n"
1126 "Without this check the design will not be public\n"
1127 "until you publish it yourself on YouMagine.com"
1130 #: gui/tools/youmagineGui.py:303
1131 msgid "Design name:"
1134 #: gui/tools/youmagineGui.py:305
1135 msgid "Description:"
1138 #: gui/tools/youmagineGui.py:307
1142 #: gui/tools/youmagineGui.py:309
1146 #: gui/tools/youmagineGui.py:312
1150 #: gui/tools/youmagineGui.py:315
1151 msgid "Design files:"
1154 #: gui/tools/youmagineGui.py:337
1155 msgid "The name cannot be empty"
1158 #: gui/tools/youmagineGui.py:337 gui/tools/youmagineGui.py:341
1159 msgid "New design error."
1162 #: gui/tools/youmagineGui.py:341
1163 msgid "The description cannot be empty"
1166 #: util/profile.py:114
1167 msgid "Layer height (mm)"
1170 #: util/profile.py:114
1172 "Layer height in millimeters.\n"
1173 "This is the most important setting to determine the quality of your print. "
1174 "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
1175 "0.25mm with an Ultimaker for very fast prints at low quality."
1178 #: util/profile.py:115
1179 msgid "Shell thickness (mm)"
1182 #: util/profile.py:115
1184 "Thickness of the outside shell in the horizontal direction.\n"
1185 "This is used in combination with the nozzle size to define the number\n"
1186 "of perimeter lines and the thickness of those perimeter lines."
1189 #: util/profile.py:116
1190 msgid "Enable retraction"
1193 #: util/profile.py:116
1195 "Retract the filament when the nozzle is moving over a none-printed area. "
1196 "Details about the retraction can be configured in the advanced tab."
1199 #: util/profile.py:117
1200 msgid "Bottom/Top thickness (mm)"
1203 #: util/profile.py:117
1205 "This controls the thickness of the bottom and top layers, the amount of "
1206 "solid layers put down is calculated by the layer thickness and this value.\n"
1207 "Having this value a multiple of the layer thickness makes sense. And keep it "
1208 "near your wall thickness to make an evenly strong part."
1211 #: util/profile.py:118
1212 msgid "Fill Density (%)"
1215 #: util/profile.py:118
1217 "This controls how densely filled the insides of your print will be. For a "
1218 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "
1220 "This won't effect the outside of the print and only adjusts how strong the "
1224 #: util/profile.py:119
1226 "The nozzle size is very important, this is used to calculate the line width "
1227 "of the infill, and used to calculate the amount of outside wall lines and "
1228 "thickness for the wall thickness you entered in the print settings."
1231 #: util/profile.py:120
1232 msgid "Print speed (mm/s)"
1235 #: util/profile.py:120
1237 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
1238 "s, but for good quality prints you want to print slower. Printing speed "
1239 "depends on a lot of factors. So you will be experimenting with optimal "
1240 "settings for this."
1243 #: util/profile.py:121
1244 msgid "Printing temperature (C)"
1247 #: util/profile.py:121 util/profile.py:122 util/profile.py:123
1248 #: util/profile.py:124
1250 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"
1251 "For PLA a value of 210C is usually used.\n"
1252 "For ABS a value of 230C or higher is required."
1255 #: util/profile.py:122
1256 msgid "2nd nozzle temperature (C)"
1259 #: util/profile.py:123
1260 msgid "3th nozzle temperature (C)"
1263 #: util/profile.py:124
1264 msgid "4th nozzle temperature (C)"
1267 #: util/profile.py:125
1268 msgid "Bed temperature (C)"
1271 #: util/profile.py:125
1273 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
1276 #: util/profile.py:126
1277 msgid "Support type"
1280 #: util/profile.py:126
1282 "Type of support structure build.\n"
1283 "\"Touching buildplate\" is the most commonly used support setting.\n"
1285 "None does not do any support.\n"
1286 "Touching buildplate only creates support where the support structure will "
1287 "touch the build platform.\n"
1288 "Everywhere creates support even on top of parts of the model."
1291 #: util/profile.py:127
1292 msgid "Platform adhesion type"
1295 #: util/profile.py:127
1297 "Different options that help in preventing corners from lifting due to "
1299 "Brim adds a single layer thick flat area around your object which is easy to "
1300 "cut off afterwards, and the recommended option.\n"
1301 "Raft adds a thick raster at below the object and a thin interface between "
1302 "this and your object.\n"
1303 "(Note that enabling the brim or raft disables the skirt)"
1306 #: util/profile.py:128
1307 msgid "Support dual extrusion"
1310 #: util/profile.py:128
1312 "Which extruder to use for support material, for break-away support you can "
1313 "use both extruders.\n"
1314 "But if one of the materials is more expensive then the other you could "
1315 "select an extruder to use for support material. This causes more extruder "
1317 "You can also use the 2nd extruder for soluble support materials."
1320 #: util/profile.py:129
1321 msgid "Diameter (mm)"
1324 #: util/profile.py:129
1326 "Diameter of your filament, as accurately as possible.\n"
1327 "If you cannot measure this value you will have to calibrate it, a higher "
1328 "number means less extrusion, a smaller number generates more extrusion."
1331 #: util/profile.py:130
1332 msgid "Diameter2 (mm)"
1335 #: util/profile.py:130
1337 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
1341 #: util/profile.py:131
1342 msgid "Diameter3 (mm)"
1345 #: util/profile.py:131
1347 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
1351 #: util/profile.py:132
1352 msgid "Diameter4 (mm)"
1355 #: util/profile.py:132
1357 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
1361 #: util/profile.py:133
1365 #: util/profile.py:133
1367 "Flow compensation, the amount of material extruded is multiplied by this "
1371 #: util/profile.py:134
1372 msgid "Speed (mm/s)"
1375 #: util/profile.py:134
1377 "Speed at which the filament is retracted, a higher retraction speed works "
1378 "better. But a very high retraction speed can lead to filament grinding."
1381 #: util/profile.py:135
1382 msgid "Distance (mm)"
1385 #: util/profile.py:135
1387 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
1388 "seems to generate good results."
1391 #: util/profile.py:136
1392 msgid "Dual extrusion switch amount (mm)"
1395 #: util/profile.py:136
1397 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
1398 "no retraction at all. A value of 16.0mm seems to generate good results."
1401 #: util/profile.py:137
1402 msgid "Minimum travel (mm)"
1405 #: util/profile.py:137
1407 "Minimum amount of travel needed for a retraction to happen at all. To make "
1408 "sure you do not get a lot of retractions in a small area."
1411 #: util/profile.py:138
1412 msgid "Enable combing"
1415 #: util/profile.py:138
1417 "Combing is the act of avoiding holes in the print for the head to travel "
1418 "over. If combing is disabled the printer head moves straight from the start "
1419 "point to the end point and it will always retract."
1422 #: util/profile.py:139
1423 msgid "Minimal extrusion before retracting (mm)"
1426 #: util/profile.py:139
1428 "The minimal amount of extrusion that needs to be done before retracting "
1429 "again if a retraction needs to happen before this minimal is reached the "
1430 "retraction is ignored.\n"
1431 "This avoids retraction a lot on the same piece of filament which flattens "
1432 "the filament and causes grinding issues."
1435 #: util/profile.py:140
1436 msgid "Initial layer thickness (mm)"
1439 #: util/profile.py:140
1441 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
1442 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
1446 #: util/profile.py:141
1447 msgid "Cut off object bottom (mm)"
1450 #: util/profile.py:141
1452 "Sinks the object into the platform, this can be used for objects that do not "
1453 "have a flat bottom and thus create a too small first layer."
1456 #: util/profile.py:143
1457 msgid "Dual extrusion overlap (mm)"
1460 #: util/profile.py:143
1462 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
1463 "bonds the different colors better together."
1466 #: util/profile.py:144
1467 msgid "Travel speed (mm/s)"
1470 #: util/profile.py:144
1472 "Speed at which travel moves are done, a high quality build Ultimaker can "
1473 "reach speeds of 250mm/s. But some machines might miss steps then."
1476 #: util/profile.py:145
1477 msgid "Bottom layer speed (mm/s)"
1480 #: util/profile.py:145
1482 "Print speed for the bottom layer, you want to print the first layer slower "
1483 "so it sticks better to the printer bed."
1486 #: util/profile.py:146
1487 msgid "Infill speed (mm/s)"
1490 #: util/profile.py:146
1492 "Speed at which infill parts are printed. If set to 0 then the print speed is "
1493 "used for the infill. Printing the infill faster can greatly reduce printing, "
1494 "but this can negatively effect print quality.."
1497 #: util/profile.py:147
1498 msgid "Minimal layer time (sec)"
1501 #: util/profile.py:147
1503 "Minimum time spend in a layer, gives the layer time to cool down before the "
1504 "next layer is put on top. If the layer will be placed down too fast the "
1505 "printer will slow down to make sure it has spend at least this amount of "
1506 "seconds printing this layer."
1509 #: util/profile.py:148
1510 msgid "Enable cooling fan"
1513 #: util/profile.py:148
1515 "Enable the cooling fan during the print. The extra cooling from the cooling "
1516 "fan is essential during faster prints."
1519 #: util/profile.py:150
1523 #: util/profile.py:150
1525 "The skirt is a line drawn around the object at the first layer. This helps "
1526 "to prime your extruder, and to see if the object fits on your platform.\n"
1527 "Setting this to 0 will disable the skirt. Multiple skirt lines can help "
1528 "priming your extruder better for small objects."
1531 #: util/profile.py:151
1532 msgid "Start distance (mm)"
1535 #: util/profile.py:151
1537 "The distance between the skirt and the first layer.\n"
1538 "This is the minimal distance, multiple skirt lines will be put outwards from "
1542 #: util/profile.py:152
1543 msgid "Minimal length (mm)"
1546 #: util/profile.py:152
1548 "The minimal length of the skirt, if this minimal length is not reached it "
1549 "will add more skirt lines to reach this minimal lenght.\n"
1550 "Note: If the line count is set to 0 this is ignored."
1553 #: util/profile.py:155
1554 msgid "Fan on layer number"
1557 #: util/profile.py:155
1559 "The layer at which the fan is turned on. The first layer is layer 0. The "
1560 "first layer can stick better if you turn on the fan on, on the 2nd layer."
1563 #: util/profile.py:156
1564 msgid "Fan speed min (%)"
1567 #: util/profile.py:156
1569 "When the fan is turned on, it is enabled at this speed setting. If cool "
1570 "slows down the layer, the fan is adjusted between the min and max speed. "
1571 "Minimal fan speed is used if the layer is not slowed down due to cooling."
1574 #: util/profile.py:157
1575 msgid "Fan speed max (%)"
1578 #: util/profile.py:157
1580 "When the fan is turned on, it is enabled at this speed setting. If cool "
1581 "slows down the layer, the fan is adjusted between the min and max speed. "
1582 "Maximal fan speed is used if the layer is slowed down due to cooling by more "
1586 #: util/profile.py:158
1587 msgid "Minimum speed (mm/s)"
1590 #: util/profile.py:158
1592 "The minimal layer time can cause the print to slow down so much it starts to "
1593 "ooze. The minimal feedrate protects against this. Even if a print gets slown "
1594 "down it will never be slower than this minimal speed."
1597 #: util/profile.py:159
1598 msgid "Cool head lift"
1601 #: util/profile.py:159
1603 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "
1604 "the extra time so the minimal layer time is always hit."
1607 #: util/profile.py:164
1608 msgid "Solid infill top"
1611 #: util/profile.py:164
1613 "Create a solid top surface, if set to false the top is filled with the fill "
1614 "percentage. Useful for cups/vases."
1617 #: util/profile.py:165
1618 msgid "Solid infill bottom"
1621 #: util/profile.py:165
1623 "Create a solid bottom surface, if set to false the bottom is filled with the "
1624 "fill percentage. Useful for buildings."
1627 #: util/profile.py:166
1628 msgid "Infill overlap (%)"
1631 #: util/profile.py:166
1633 "Amount of overlap between the infill and the walls. There is a slight "
1634 "overlap with the walls and the infill so the walls connect firmly to the "
1638 #: util/profile.py:167
1639 msgid "Fill amount (%)"
1642 #: util/profile.py:167
1643 #, possible-python-format
1645 "Amount of infill structure in the support material, less material gives "
1646 "weaker support which is easier to remove. 20% seems to be a good average."
1649 #: util/profile.py:168
1650 msgid "Distance X/Y (mm)"
1653 #: util/profile.py:168
1655 "Distance of the support material from the print, in the X/Y directions.\n"
1656 "0.7mm gives a nice distance from the print so the support does not stick to "
1660 #: util/profile.py:169
1661 msgid "Distance Z (mm)"
1664 #: util/profile.py:169
1666 "Distance from the top/bottom of the support to the print. A small gap here "
1667 "makes it easier to remove the support but makes the print a bit uglier.\n"
1668 "0.15mm gives a good seperation of the support material."
1671 #: util/profile.py:173
1672 msgid "Brim line amount"
1675 #: util/profile.py:173
1677 "The amount of lines used for a brim, more lines means a larger brim which "
1678 "sticks better, but this also makes your effective print area smaller."
1681 #: util/profile.py:174
1682 msgid "Extra margin (mm)"
1685 #: util/profile.py:174
1687 "If the raft is enabled, this is the extra raft area around the object which "
1688 "is also rafted. Increasing this margin will create a stronger raft while "
1689 "using more material and leaving less are for your print."
1692 #: util/profile.py:175
1693 msgid "Line spacing (mm)"
1696 #: util/profile.py:175
1698 "When you are using the raft this is the distance between the centerlines of "
1702 #: util/profile.py:176
1703 msgid "Base thickness (mm)"
1706 #: util/profile.py:176
1708 "When you are using the raft this is the thickness of the base layer which is "
1712 #: util/profile.py:177
1713 msgid "Base line width (mm)"
1716 #: util/profile.py:177
1718 "When you are using the raft this is the width of the base layer lines which "
1722 #: util/profile.py:178
1723 msgid "Interface thickness (mm)"
1726 #: util/profile.py:178
1728 "When you are using the raft this is the thickness of the interface layer "
1729 "which is put down."
1732 #: util/profile.py:179
1733 msgid "Interface line width (mm)"
1736 #: util/profile.py:179
1738 "When you are using the raft this is the width of the interface layer lines "
1739 "which are put down."
1742 #: util/profile.py:181
1743 msgid "Combine everything (Type-A)"
1746 #: util/profile.py:181 util/profile.py:182
1748 "This expert option adds all parts of the model together. The result is "
1749 "usually that internal cavities disappear. Depending on the model this can be "
1750 "intended or not. Enabling this option is at your own risk. Type-A is "
1751 "depended on the model normals and tries to keep some internal holes intact. "
1752 "Type-B ignores all internal holes and only keeps the outside shape per layer."
1755 #: util/profile.py:182
1756 msgid "Combine everything (Type-B)"
1759 #: util/profile.py:183
1760 msgid "Keep open faces"
1763 #: util/profile.py:183
1765 "This expert option keeps all the open bits of the model intact. Normally "
1766 "Cura tries to stitch up small holes and remove everything with big holes, "
1767 "but this option keeps bits that are not properly part of anything and just "
1768 "goes with whatever it is left. This option is usually not what you want, but "
1769 "it might enable you to slice models otherwise failing to produce proper "
1771 "As with all \"Fix horrible\" options, results may vary and use at your own "
1775 #: util/profile.py:184
1776 msgid "Extensive stitching"
1779 #: util/profile.py:184
1781 "Extrensive stitching tries to fix up open holes in the model by closing the "
1782 "hole with touching polygons. This algorthm is quite expensive and could "
1783 "introduce a lot of processing time.\n"
1784 "As with all \"Fix horrible\" options, results may vary and use at your own "