1 # SOME DESCRIPTIVE TITLE.
3 # This file is distributed under the same license as the Cura package.
4 # Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
8 "Project-Id-Version: Cura\n"
9 "Report-Msgid-Bugs-To: \n"
10 "POT-Creation-Date: 2013-09-27 09:25+0200\n"
11 "PO-Revision-Date: 2013-09-27 09:41+0100\n"
13 "Language-Team: LANGUAGE <LL@li.org>\n"
15 "Content-Type: text/plain; charset=UTF-8\n"
16 "Content-Transfer-Encoding: 8bit\n"
17 "X-Generator: Poedit 1.5.7\n"
19 #: Cura/gui/app.py:86 Cura/gui/mainWindow.py:520
20 msgid "A new version of Cura is available, would you like to download?"
23 #: Cura/gui/app.py:86 Cura/gui/mainWindow.py:520
24 msgid "New version available"
27 #: Cura/gui/configWizard.py:220
28 msgid "Add new machine wizard"
31 #: Cura/gui/configWizard.py:222
32 msgid "First time run wizard"
35 #: Cura/gui/configWizard.py:223
36 msgid "Welcome, and thanks for trying Cura!"
39 #: Cura/gui/configWizard.py:225
40 msgid "This wizard will help you with the following steps:"
43 #: Cura/gui/configWizard.py:226
44 msgid "* Configure Cura for your machine"
47 #: Cura/gui/configWizard.py:227
48 msgid "* Optionally upgrade your firmware"
51 #: Cura/gui/configWizard.py:228
52 msgid "* Optionally check if your machine is working safely"
55 #: Cura/gui/configWizard.py:229
56 msgid "* Optionally level your printer bed"
59 #: Cura/gui/configWizard.py:239
61 "RepRap machines are vastly different, and there is no\n"
62 "default configuration in Cura for any of them."
65 #: Cura/gui/configWizard.py:240
67 "If you like a default profile for your machine added,\n"
68 "then make an issue on github."
71 #: Cura/gui/configWizard.py:242
72 msgid "You will have to manually install Marlin or Sprinter firmware."
75 #: Cura/gui/configWizard.py:244
79 #: Cura/gui/configWizard.py:245
80 msgid "Machine width (mm)"
83 #: Cura/gui/configWizard.py:246
84 msgid "Machine depth (mm)"
87 #: Cura/gui/configWizard.py:247
88 msgid "Machine height (mm)"
91 #: Cura/gui/configWizard.py:248 Cura/util/profile.py:158
92 msgid "Nozzle size (mm)"
95 #: Cura/gui/configWizard.py:249 Cura/util/profile.py:367
99 #: Cura/gui/configWizard.py:250
100 msgid "Bed center is 0,0,0 (RoStock)"
103 #: Cura/gui/configWizard.py:270
104 msgid "Select your machine"
107 #: Cura/gui/configWizard.py:271
108 msgid "What kind of machine do you have:"
111 #: Cura/gui/configWizard.py:278
112 msgid "Other (Ex: RepRap)"
115 #: Cura/gui/configWizard.py:281
117 "The collection of anonymous usage information helps with the continued "
118 "improvement of Cura."
121 #: Cura/gui/configWizard.py:282
123 "This does NOT submit your models online nor gathers any privacy related "
127 #: Cura/gui/configWizard.py:283
128 msgid "Submit anonymous usage information:"
131 #: Cura/gui/configWizard.py:284
132 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
135 #: Cura/gui/configWizard.py:346
136 msgid "Select upgraded parts you have"
139 #: Cura/gui/configWizard.py:347
141 "To assist you in having better default settings for your Ultimaker\n"
142 "Cura would like to know which upgrades you have in your machine."
145 #: Cura/gui/configWizard.py:349
146 msgid "Extruder drive upgrade"
149 #: Cura/gui/configWizard.py:350
150 msgid "Heated printer bed (self built)"
153 #: Cura/gui/configWizard.py:351
154 msgid "Dual extrusion (experimental)"
157 #: Cura/gui/configWizard.py:353
159 "If you have an Ultimaker bought after october 2012 you will have the\n"
160 "Extruder drive upgrade. If you do not have this upgrade,\n"
161 "it is highly recommended to improve reliability."
164 #: Cura/gui/configWizard.py:354
166 "This upgrade can be bought from the Ultimaker webshop\n"
167 "or found on thingiverse as thing:26094"
170 #: Cura/gui/configWizard.py:373
171 msgid "Upgrade Ultimaker Firmware"
174 #: Cura/gui/configWizard.py:374
176 "Firmware is the piece of software running directly on your 3D printer.\n"
177 "This firmware controls the step motors, regulates the temperature\n"
178 "and ultimately makes your printer work."
181 #: Cura/gui/configWizard.py:376
183 "The firmware shipping with new Ultimakers works, but upgrades\n"
184 "have been made to make better prints, and make calibration easier."
187 #: Cura/gui/configWizard.py:378
189 "Cura requires these new features and thus\n"
190 "your firmware will most likely need to be upgraded.\n"
191 "You will get the chance to do so now."
194 #: Cura/gui/configWizard.py:383
195 msgid "Do not upgrade to this firmware if:"
198 #: Cura/gui/configWizard.py:384
199 msgid "* You have an older machine based on ATMega1280"
202 #: Cura/gui/configWizard.py:385
203 msgid "* Have other changes in the firmware"
206 #: Cura/gui/configWizard.py:419
208 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"
209 "You can skip these if you know your machine is functional."
212 #: Cura/gui/configWizard.py:420
216 #: Cura/gui/configWizard.py:420
220 #: Cura/gui/configWizard.py:424
221 msgid "Communication:"
224 #: Cura/gui/configWizard.py:425
228 #: Cura/gui/configWizard.py:426
232 #: Cura/gui/configWizard.py:431
233 msgid "Show error log"
236 #: Cura/gui/configWizard.py:465
237 msgid "Connecting to machine."
240 #: Cura/gui/configWizard.py:486
241 msgid "Cooldown before temperature check."
244 #: Cura/gui/configWizard.py:492 Cura/gui/configWizard.py:499
245 msgid "Checking the heater and temperature sensor."
248 #: Cura/gui/configWizard.py:510
249 msgid "Please make sure none of the endstops are pressed."
252 #: Cura/gui/configWizard.py:523
253 msgid "Temperature measurement FAILED!"
256 #: Cura/gui/configWizard.py:528
258 msgid "Head temperature: %d"
261 #: Cura/gui/configWizard.py:535 Cura/gui/configWizard.py:544
263 msgid "Communication State: %s"
266 #: Cura/gui/configWizard.py:538
267 msgid "Failed to establish connection with the printer."
270 #: Cura/gui/configWizard.py:583
271 msgid "Please press the right X endstop."
274 #: Cura/gui/configWizard.py:588
275 msgid "Please press the left X endstop."
278 #: Cura/gui/configWizard.py:593
279 msgid "Please press the front Y endstop."
282 #: Cura/gui/configWizard.py:598
283 msgid "Please press the back Y endstop."
286 #: Cura/gui/configWizard.py:603
287 msgid "Please press the top Z endstop."
290 #: Cura/gui/configWizard.py:608
291 msgid "Please press the bottom Z endstop."
294 #: Cura/gui/configWizard.py:614
295 msgid "Checkup finished"
298 #: Cura/gui/configWizard.py:657
299 msgid "Calibrating the Steps Per E requires some manual actions."
302 #: Cura/gui/configWizard.py:658
303 msgid "First remove any filament from your machine."
306 #: Cura/gui/configWizard.py:659
308 "Next put in your filament so the tip is aligned with the\n"
309 "top of the extruder drive."
312 #: Cura/gui/configWizard.py:660
313 msgid "We'll push the filament 100mm"
316 #: Cura/gui/configWizard.py:661
317 msgid "Extrude 100mm filament"
320 #: Cura/gui/configWizard.py:662
322 "Now measure the amount of extruded filament:\n"
323 "(this can be more or less then 100mm)"
326 #: Cura/gui/configWizard.py:663
330 #: Cura/gui/configWizard.py:664
331 msgid "This results in the following steps per E:"
334 #: Cura/gui/configWizard.py:666
335 msgid "You can repeat these steps to get better calibration."
338 #: Cura/gui/configWizard.py:669
340 "If you still have filament in your printer which needs\n"
341 "heat to remove, press the heat up button below:"
344 #: Cura/gui/configWizard.py:670
345 msgid "Heatup for filament removal"
348 #: Cura/gui/configWizard.py:693 Cura/gui/configWizard.py:725
350 "Error: Failed to open serial port to machine\n"
351 "If this keeps happening, try disconnecting and reconnecting the USB cable"
354 #: Cura/gui/firmwareInstall.py:39
356 "I am sorry, but Cura does not ship with a default firmware for your machine "
360 #: Cura/gui/firmwareInstall.py:39 Cura/gui/firmwareInstall.py:98
361 #: Cura/gui/mainWindow.py:455
362 msgid "Firmware update"
365 #: Cura/gui/firmwareInstall.py:49
369 #: Cura/gui/firmwareInstall.py:68
370 msgid "Reading firmware..."
373 #: Cura/gui/firmwareInstall.py:70
374 msgid "Connecting to machine..."
377 #: Cura/gui/firmwareInstall.py:87
378 msgid "Uploading firmware..."
381 #: Cura/gui/firmwareInstall.py:90
385 "Installed firmware: %s"
388 #: Cura/gui/firmwareInstall.py:92
389 msgid "Failed to write firmware.\n"
392 #: Cura/gui/firmwareInstall.py:97
394 "Failed to find machine for firmware upgrade\n"
395 "Is your machine connected to the PC?"
398 #: Cura/gui/mainWindow.py:54
399 msgid "Load model file...\tCTRL+L"
402 #: Cura/gui/mainWindow.py:56
403 msgid "Save model...\tCTRL+S"
406 #: Cura/gui/mainWindow.py:58
407 msgid "Clear platform"
410 #: Cura/gui/mainWindow.py:62
411 msgid "Print...\tCTRL+P"
414 #: Cura/gui/mainWindow.py:64 Cura/gui/sceneView.py:214
415 msgid "Save GCode..."
418 #: Cura/gui/mainWindow.py:66
419 msgid "Show slice engine log..."
422 #: Cura/gui/mainWindow.py:70
423 msgid "Open Profile..."
426 #: Cura/gui/mainWindow.py:73
427 msgid "Save Profile..."
430 #: Cura/gui/mainWindow.py:76
431 msgid "Load Profile from GCode..."
434 #: Cura/gui/mainWindow.py:80
435 msgid "Reset Profile to default"
438 #: Cura/gui/mainWindow.py:85
439 msgid "Preferences...\tCTRL+,"
442 #: Cura/gui/mainWindow.py:87
443 msgid "Machine settings..."
446 #: Cura/gui/mainWindow.py:93
447 msgid "&Recent Model Files"
450 #: Cura/gui/mainWindow.py:100
451 msgid "&Recent Profile Files"
454 #: Cura/gui/mainWindow.py:106
458 #: Cura/gui/mainWindow.py:108
462 #: Cura/gui/mainWindow.py:112
463 msgid "Switch to quickprint..."
466 #: Cura/gui/mainWindow.py:116
467 msgid "Switch to full settings..."
470 #: Cura/gui/mainWindow.py:126
471 msgid "Minecraft import..."
474 #: Cura/gui/mainWindow.py:130
475 msgid "PID Debugger..."
478 #: Cura/gui/mainWindow.py:133
479 msgid "Copy profile to clipboard"
482 #: Cura/gui/mainWindow.py:135
486 #: Cura/gui/mainWindow.py:141 Cura/util/profile.py:158
490 #: Cura/gui/mainWindow.py:144
491 msgid "Open expert settings..."
494 #: Cura/gui/mainWindow.py:148
495 msgid "Run first run wizard..."
498 #: Cura/gui/mainWindow.py:150
499 msgid "Run bed leveling wizard..."
502 #: Cura/gui/mainWindow.py:153
503 msgid "Run head offset wizard..."
506 #: Cura/gui/mainWindow.py:156
510 #: Cura/gui/mainWindow.py:159
511 msgid "Online documentation..."
514 #: Cura/gui/mainWindow.py:161
515 msgid "Report a problem..."
518 #: Cura/gui/mainWindow.py:163
519 msgid "Check for update..."
522 #: Cura/gui/mainWindow.py:165
523 msgid "Open YouMagine website..."
526 #: Cura/gui/mainWindow.py:167
527 msgid "About Cura..."
530 #: Cura/gui/mainWindow.py:169
534 #: Cura/gui/mainWindow.py:387
535 msgid "Add new machine..."
538 #: Cura/gui/mainWindow.py:392
539 msgid "Install custom firmware"
542 #: Cura/gui/mainWindow.py:394
543 msgid "Install default Marlin firmware"
546 #: Cura/gui/mainWindow.py:398
547 msgid "Select profile file to load"
550 #: Cura/gui/mainWindow.py:410
551 msgid "Select gcode file to load profile from"
554 #: Cura/gui/mainWindow.py:423
556 "No profile found in GCode file.\n"
557 "This feature only works with GCode files made by Cura 12.07 or newer."
560 #: Cura/gui/mainWindow.py:423
561 msgid "Profile load error"
564 #: Cura/gui/mainWindow.py:427
565 msgid "Select profile file to save"
568 #: Cura/gui/mainWindow.py:435
570 "This will reset all profile settings to defaults.\n"
571 "Unless you have saved your current profile, all settings will be lost!\n"
572 "Do you really want to reset?"
575 #: Cura/gui/mainWindow.py:435
576 msgid "Profile reset"
579 #: Cura/gui/mainWindow.py:455
581 "Warning: Installing a custom firmware does not guarantee that you machine "
582 "will function correctly, and could damage your machine."
585 #: Cura/gui/mainWindow.py:456
586 msgid "Open firmware to upload"
589 #: Cura/gui/mainWindow.py:523
590 msgid "You are running the latest version of Cura!"
593 #: Cura/gui/mainWindow.py:523
597 #: Cura/gui/mainWindow.py:535
598 msgid "Copyright (C) David Braam"
601 #: Cura/gui/mainWindow.py:601
605 #: Cura/gui/pluginPanel.py:26
609 #: Cura/gui/pluginPanel.py:30
610 msgid "Open plugin location"
613 #: Cura/gui/pluginPanel.py:31
614 msgid "Enabled plugins"
617 #: Cura/gui/pluginPanel.py:133
618 msgid "You need to select a plugin before you can add anything."
621 #: Cura/gui/pluginPanel.py:133
622 msgid "Error: no plugin selected"
625 #: Cura/gui/preferencesDialog.py:24
629 #: Cura/gui/preferencesDialog.py:29
630 msgid "Filament settings"
633 #: Cura/gui/preferencesDialog.py:39
634 msgid "Cura settings"
637 #: Cura/gui/preferencesDialog.py:73
638 msgid "Machine settings"
641 #: Cura/gui/preferencesDialog.py:82
642 msgid "Printer head size"
645 #: Cura/gui/preferencesDialog.py:90
650 #: Cura/gui/preferencesDialog.py:94
651 msgid "Communication settings"
654 #: Cura/gui/preferencesDialog.py:137
655 msgid "Cannot remove the last machine configuration in Cura"
658 #: Cura/gui/preferencesDialog.py:137
659 msgid "Machine remove error"
662 #: Cura/gui/printWindow.py:129
666 #: Cura/gui/printWindow.py:158
670 #: Cura/gui/printWindow.py:163
672 "Your computer is running on battery power.\n"
673 "Connect your computer to AC power or your print might not finish."
676 #: Cura/gui/printWindow.py:174
678 "Filament: ####.##m #.##g\n"
679 "Estimated print time: #####:##\n"
681 "Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
684 #: Cura/gui/printWindow.py:179
688 #: Cura/gui/printWindow.py:181 Cura/gui/sceneView.py:64
689 #: Cura/gui/sceneView.py:774
693 #: Cura/gui/printWindow.py:182 Cura/gui/printWindow.py:419
697 #: Cura/gui/printWindow.py:183
701 #: Cura/gui/printWindow.py:184
705 #: Cura/gui/printWindow.py:205
709 #: Cura/gui/printWindow.py:213
713 #: Cura/gui/printWindow.py:261
717 #: Cura/gui/printWindow.py:276
721 #: Cura/gui/printWindow.py:279
725 #: Cura/gui/printWindow.py:282
729 #: Cura/gui/printWindow.py:285
733 #: Cura/gui/printWindow.py:289 Cura/util/profile.py:183
734 #: Cura/util/profile.py:184 Cura/util/profile.py:185
738 #: Cura/gui/printWindow.py:307
742 #: Cura/gui/printWindow.py:314
743 msgid "Enable timelapse movie recording"
746 #: Cura/gui/printWindow.py:328
750 #: Cura/gui/printWindow.py:334
754 #: Cura/gui/printWindow.py:417
758 #: Cura/gui/printWindow.py:434
759 msgid "Loading gcode...\n"
762 #: Cura/gui/printWindow.py:436
764 msgid "Filament: %(amount).2fm %(weight).2fg\n"
767 #: Cura/gui/printWindow.py:439
769 msgid "Filament cost: %s\n"
772 #: Cura/gui/sceneView.py:63
776 #: Cura/gui/sceneView.py:68
780 #: Cura/gui/sceneView.py:69
784 #: Cura/gui/sceneView.py:70
788 #: Cura/gui/sceneView.py:72 Cura/gui/sceneView.py:75
792 #: Cura/gui/sceneView.py:73
796 #: Cura/gui/sceneView.py:76
800 #: Cura/gui/sceneView.py:78
804 #: Cura/gui/sceneView.py:79
808 #: Cura/gui/sceneView.py:80
812 #: Cura/gui/sceneView.py:88
816 #: Cura/gui/sceneView.py:90
820 #: Cura/gui/sceneView.py:92
824 #: Cura/gui/sceneView.py:94
828 #: Cura/gui/sceneView.py:96
832 #: Cura/gui/sceneView.py:98
836 #: Cura/gui/sceneView.py:100
837 msgid "Uniform scale"
840 #: Cura/gui/sceneView.py:103
844 #: Cura/gui/sceneView.py:103
848 #: Cura/gui/sceneView.py:103
852 #: Cura/gui/sceneView.py:103
856 #: Cura/gui/sceneView.py:103
860 #: Cura/gui/sceneView.py:103
864 #: Cura/gui/sceneView.py:106
865 msgid "Share on YouMagine"
868 #: Cura/gui/sceneView.py:168
869 msgid "Open 3D model"
872 #: Cura/gui/sceneView.py:183
873 msgid "Save 3D model"
876 #: Cura/gui/sceneView.py:213
877 msgid "Print with USB"
880 #: Cura/gui/sceneView.py:215
881 msgid "Slice engine log..."
884 #: Cura/gui/sceneView.py:229 Cura/gui/sceneView.py:780
885 msgid "Save toolpath"
888 #: Cura/gui/sceneView.py:266
889 msgid "The slicing engine reported the following"
892 #: Cura/gui/sceneView.py:266
893 msgid "Engine log..."
896 #: Cura/gui/sceneView.py:645
897 msgid "Delete object"
900 #: Cura/gui/sceneView.py:646
901 msgid "Center on platform"
904 #: Cura/gui/sceneView.py:647
905 msgid "Multiply object"
908 #: Cura/gui/sceneView.py:648
909 msgid "Split object into parts"
912 #: Cura/gui/sceneView.py:650
913 msgid "Dual extrusion merge"
916 #: Cura/gui/sceneView.py:652
917 msgid "Delete all objects"
920 #: Cura/gui/sceneView.py:777
921 msgid "Toolpath to SD"
924 #: Cura/gui/sceneView.py:1087
925 msgid "Loading toolpath for visualization..."
928 #: Cura/gui/sceneView.py:1138
929 msgid "Overhang view not working due to lack of OpenGL shaders support."
932 #: Cura/gui/simpleMode.py:20
933 msgid "High quality print"
936 #: Cura/gui/simpleMode.py:21
937 msgid "Normal quality print"
940 #: Cura/gui/simpleMode.py:22
941 msgid "Fast low quality print"
944 #: Cura/gui/simpleMode.py:23
945 msgid "Thin walled cup or vase"
948 #: Cura/gui/simpleMode.py:33
949 msgid "Print support structure"
952 #: Cura/gui/simpleMode.py:38
953 msgid "Select a print type:"
956 #: Cura/gui/simpleMode.py:48
960 #: Cura/gui/simpleMode.py:52
964 #: Cura/gui/simpleMode.py:58
968 #: Cura/gui/simpleMode.py:119
969 msgid "Exterior Only"
972 #: Cura/gui/tools/batchRun.py:14
973 msgid "Cura - Batch run"
976 #: Cura/gui/tools/batchRun.py:29
980 #: Cura/gui/tools/batchRun.py:30
984 #: Cura/gui/tools/batchRun.py:31
988 #: Cura/gui/tools/batchRun.py:47
989 msgid "Open file to batch prepare"
992 #: Cura/gui/tools/batchRun.py:134
994 msgid "Building: %d "
997 #: Cura/gui/tools/batchRun.py:137
1002 #: Cura/gui/tools/batchRun.py:140
1006 #: Cura/gui/tools/batchRun.py:163 Cura/gui/tools/batchRun.py:233
1010 #: Cura/gui/tools/batchRun.py:187
1012 msgid "Build: %d models"
1015 #: Cura/gui/tools/batchRun.py:188
1019 "Slicing took: %(hours)02d:%(minutes)02d"
1022 #: Cura/gui/tools/batchRun.py:198
1024 msgid "Building: [%(index)d/%(size)d]"
1027 #: Cura/gui/tools/batchRun.py:214
1028 msgid "Aborted by user."
1031 #: Cura/gui/tools/batchRun.py:228
1033 msgid "Done %(index)d/%(size)d"
1036 #: Cura/gui/tools/batchRun.py:236
1040 #: Cura/gui/tools/youmagineGui.py:79
1041 msgid "Checking token"
1044 #: Cura/gui/tools/youmagineGui.py:83
1045 msgid "Failed to contact YouMagine.com"
1048 #: Cura/gui/tools/youmagineGui.py:83 Cura/gui/tools/youmagineGui.py:116
1049 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
1050 #: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
1051 msgid "YouMagine error."
1054 #: Cura/gui/tools/youmagineGui.py:100
1055 msgid "Cura is now authorized to share on YouMagine"
1058 #: Cura/gui/tools/youmagineGui.py:100
1062 #: Cura/gui/tools/youmagineGui.py:112
1063 msgid "Creating new design on YouMagine..."
1066 #: Cura/gui/tools/youmagineGui.py:116
1067 msgid "Failed to create a design, nothing uploaded!"
1070 #: Cura/gui/tools/youmagineGui.py:120
1072 msgid "Building model %s..."
1075 #: Cura/gui/tools/youmagineGui.py:131
1077 msgid "Uploading model %s..."
1080 #: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
1081 #: Cura/gui/tools/youmagineGui.py:148
1083 msgid "Failed to upload %s!"
1086 #: Cura/gui/tools/youmagineGui.py:137
1088 msgid "Uploading file %s..."
1091 #: Cura/gui/tools/youmagineGui.py:145
1093 msgid "Uploading image %s..."
1096 #: Cura/gui/tools/youmagineGui.py:153
1097 msgid "Failed to upload snapshot!"
1100 #: Cura/gui/tools/youmagineGui.py:158
1101 msgid "Publishing design..."
1104 #: Cura/gui/tools/youmagineGui.py:230
1105 msgid "Request authorization from YouMagine"
1108 #: Cura/gui/tools/youmagineGui.py:231
1109 msgid "Paste token here"
1112 #: Cura/gui/tools/youmagineGui.py:237
1114 "To share your designs on YouMagine\n"
1115 "you need an account on YouMagine.com\n"
1116 "and authorize Cura to access your account."
1119 #: Cura/gui/tools/youmagineGui.py:239
1121 "This will open a browser window where you can\n"
1122 "authorize Cura to access your YouMagine account.\n"
1123 "You can revoke access at any time\n"
1124 "from YouMagine.com"
1127 #: Cura/gui/tools/youmagineGui.py:274
1131 #: Cura/gui/tools/youmagineGui.py:278
1132 msgid "Publish after upload"
1135 #: Cura/gui/tools/youmagineGui.py:279
1139 #: Cura/gui/tools/youmagineGui.py:287
1143 #: Cura/gui/tools/youmagineGui.py:289
1147 #: Cura/gui/tools/youmagineGui.py:297
1149 "Directly publish the design after uploading.\n"
1150 "Without this check the design will not be public\n"
1151 "until you publish it yourself on YouMagine.com"
1154 #: Cura/gui/tools/youmagineGui.py:303
1155 msgid "Design name:"
1158 #: Cura/gui/tools/youmagineGui.py:305
1159 msgid "Description:"
1162 #: Cura/gui/tools/youmagineGui.py:307
1166 #: Cura/gui/tools/youmagineGui.py:309
1170 #: Cura/gui/tools/youmagineGui.py:312
1174 #: Cura/gui/tools/youmagineGui.py:315
1175 msgid "Related design files:"
1178 #: Cura/gui/tools/youmagineGui.py:338
1179 msgid "The name cannot be empty"
1182 #: Cura/gui/tools/youmagineGui.py:338 Cura/gui/tools/youmagineGui.py:342
1183 msgid "New design error."
1186 #: Cura/gui/tools/youmagineGui.py:342
1187 msgid "The description cannot be empty"
1190 #: Cura/gui/util/openglGui.py:239
1191 msgid "An error has occurred during the 3D view drawing."
1194 #: Cura/gui/util/openglGui.py:246
1195 msgid "3D window error"
1198 #: Cura/util/profile.py:153 Cura/util/profile.py:154 Cura/util/profile.py:155
1199 #: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:182
1203 #: Cura/util/profile.py:153
1204 msgid "Layer height (mm)"
1207 #: Cura/util/profile.py:153
1209 "Layer height in millimeters.\n"
1210 "This is the most important setting to determine the quality of your print. "
1211 "Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
1212 "0.25mm with an Ultimaker for very fast prints at low quality."
1215 #: Cura/util/profile.py:154
1216 msgid "Shell thickness (mm)"
1219 #: Cura/util/profile.py:154
1221 "Thickness of the outside shell in the horizontal direction.\n"
1222 "This is used in combination with the nozzle size to define the number\n"
1223 "of perimeter lines and the thickness of those perimeter lines."
1226 #: Cura/util/profile.py:155
1227 msgid "Enable retraction"
1230 #: Cura/util/profile.py:155
1232 "Retract the filament when the nozzle is moving over a none-printed area. "
1233 "Details about the retraction can be configured in the advanced tab."
1236 #: Cura/util/profile.py:156 Cura/util/profile.py:157
1240 #: Cura/util/profile.py:156
1241 msgid "Bottom/Top thickness (mm)"
1244 #: Cura/util/profile.py:156
1246 "This controls the thickness of the bottom and top layers, the amount of "
1247 "solid layers put down is calculated by the layer thickness and this value.\n"
1248 "Having this value a multiple of the layer thickness makes sense. And keep it "
1249 "near your wall thickness to make an evenly strong part."
1252 #: Cura/util/profile.py:157
1253 msgid "Fill Density (%)"
1256 #: Cura/util/profile.py:157
1258 "This controls how densely filled the insides of your print will be. For a "
1259 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "
1261 "This won't effect the outside of the print and only adjusts how strong the "
1265 #: Cura/util/profile.py:158
1267 "The nozzle size is very important, this is used to calculate the line width "
1268 "of the infill, and used to calculate the amount of outside wall lines and "
1269 "thickness for the wall thickness you entered in the print settings."
1272 #: Cura/util/profile.py:159 Cura/util/profile.py:160 Cura/util/profile.py:161
1273 #: Cura/util/profile.py:162 Cura/util/profile.py:163 Cura/util/profile.py:164
1274 msgid "Speed & Temperature"
1277 #: Cura/util/profile.py:159
1278 msgid "Print speed (mm/s)"
1281 #: Cura/util/profile.py:159
1283 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
1284 "s, but for good quality prints you want to print slower. Printing speed "
1285 "depends on a lot of factors. So you will be experimenting with optimal "
1286 "settings for this."
1289 #: Cura/util/profile.py:160
1290 msgid "Printing temperature (C)"
1293 #: Cura/util/profile.py:160 Cura/util/profile.py:161 Cura/util/profile.py:162
1294 #: Cura/util/profile.py:163
1296 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"
1297 "For PLA a value of 210C is usually used.\n"
1298 "For ABS a value of 230C or higher is required."
1301 #: Cura/util/profile.py:161
1302 msgid "2nd nozzle temperature (C)"
1305 #: Cura/util/profile.py:162
1306 msgid "3th nozzle temperature (C)"
1309 #: Cura/util/profile.py:163
1310 msgid "4th nozzle temperature (C)"
1313 #: Cura/util/profile.py:164
1314 msgid "Bed temperature (C)"
1317 #: Cura/util/profile.py:164
1319 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
1322 #: Cura/util/profile.py:165 Cura/util/profile.py:166 Cura/util/profile.py:167
1323 #: Cura/util/profile.py:206 Cura/util/profile.py:207 Cura/util/profile.py:208
1327 #: Cura/util/profile.py:165
1328 msgid "Support type"
1331 #: Cura/util/profile.py:165
1333 "Type of support structure build.\n"
1334 "\"Touching buildplate\" is the most commonly used support setting.\n"
1336 "None does not do any support.\n"
1337 "Touching buildplate only creates support where the support structure will "
1338 "touch the build platform.\n"
1339 "Everywhere creates support even on top of parts of the model."
1342 #: Cura/util/profile.py:166
1343 msgid "Platform adhesion type"
1346 #: Cura/util/profile.py:166
1348 "Different options that help in preventing corners from lifting due to "
1350 "Brim adds a single layer thick flat area around your object which is easy to "
1351 "cut off afterwards, and the recommended option.\n"
1352 "Raft adds a thick raster at below the object and a thin interface between "
1353 "this and your object.\n"
1354 "(Note that enabling the brim or raft disables the skirt)"
1357 #: Cura/util/profile.py:167
1358 msgid "Support dual extrusion"
1361 #: Cura/util/profile.py:167
1363 "Which extruder to use for support material, for break-away support you can "
1364 "use both extruders.\n"
1365 "But if one of the materials is more expensive then the other you could "
1366 "select an extruder to use for support material. This causes more extruder "
1368 "You can also use the 2nd extruder for soluble support materials."
1371 #: Cura/util/profile.py:168 Cura/util/profile.py:169 Cura/util/profile.py:170
1372 #: Cura/util/profile.py:171 Cura/util/profile.py:172
1376 #: Cura/util/profile.py:168
1377 msgid "Diameter (mm)"
1380 #: Cura/util/profile.py:168
1382 "Diameter of your filament, as accurately as possible.\n"
1383 "If you cannot measure this value you will have to calibrate it, a higher "
1384 "number means less extrusion, a smaller number generates more extrusion."
1387 #: Cura/util/profile.py:169
1388 msgid "Diameter2 (mm)"
1391 #: Cura/util/profile.py:169
1393 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
1397 #: Cura/util/profile.py:170
1398 msgid "Diameter3 (mm)"
1401 #: Cura/util/profile.py:170
1403 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
1407 #: Cura/util/profile.py:171
1408 msgid "Diameter4 (mm)"
1411 #: Cura/util/profile.py:171
1413 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
1417 #: Cura/util/profile.py:172
1421 #: Cura/util/profile.py:172
1423 "Flow compensation, the amount of material extruded is multiplied by this "
1427 #: Cura/util/profile.py:173 Cura/util/profile.py:174 Cura/util/profile.py:175
1428 #: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
1432 #: Cura/util/profile.py:173
1433 msgid "Speed (mm/s)"
1436 #: Cura/util/profile.py:173
1438 "Speed at which the filament is retracted, a higher retraction speed works "
1439 "better. But a very high retraction speed can lead to filament grinding."
1442 #: Cura/util/profile.py:174
1443 msgid "Distance (mm)"
1446 #: Cura/util/profile.py:174
1448 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
1449 "seems to generate good results."
1452 #: Cura/util/profile.py:175
1453 msgid "Dual extrusion switch amount (mm)"
1456 #: Cura/util/profile.py:175
1458 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
1459 "no retraction at all. A value of 16.0mm seems to generate good results."
1462 #: Cura/util/profile.py:176
1463 msgid "Minimum travel (mm)"
1466 #: Cura/util/profile.py:176
1468 "Minimum amount of travel needed for a retraction to happen at all. To make "
1469 "sure you do not get a lot of retractions in a small area."
1472 #: Cura/util/profile.py:177
1473 msgid "Enable combing"
1476 #: Cura/util/profile.py:177
1478 "Combing is the act of avoiding holes in the print for the head to travel "
1479 "over. If combing is disabled the printer head moves straight from the start "
1480 "point to the end point and it will always retract."
1483 #: Cura/util/profile.py:178
1484 msgid "Minimal extrusion before retracting (mm)"
1487 #: Cura/util/profile.py:178
1489 "The minimal amount of extrusion that needs to be done before retracting "
1490 "again if a retraction needs to happen before this minimal is reached the "
1491 "retraction is ignored.\n"
1492 "This avoids retraction a lot on the same piece of filament which flattens "
1493 "the filament and causes grinding issues."
1496 #: Cura/util/profile.py:179
1497 msgid "Initial layer thickness (mm)"
1500 #: Cura/util/profile.py:179
1502 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
1503 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
1507 #: Cura/util/profile.py:180
1508 msgid "Cut off object bottom (mm)"
1511 #: Cura/util/profile.py:180
1513 "Sinks the object into the platform, this can be used for objects that do not "
1514 "have a flat bottom and thus create a too small first layer."
1517 #: Cura/util/profile.py:182
1518 msgid "Dual extrusion overlap (mm)"
1521 #: Cura/util/profile.py:182
1523 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
1524 "bonds the different colors better together."
1527 #: Cura/util/profile.py:183
1528 msgid "Travel speed (mm/s)"
1531 #: Cura/util/profile.py:183
1533 "Speed at which travel moves are done, a high quality build Ultimaker can "
1534 "reach speeds of 250mm/s. But some machines might miss steps then."
1537 #: Cura/util/profile.py:184
1538 msgid "Bottom layer speed (mm/s)"
1541 #: Cura/util/profile.py:184
1543 "Print speed for the bottom layer, you want to print the first layer slower "
1544 "so it sticks better to the printer bed."
1547 #: Cura/util/profile.py:185
1548 msgid "Infill speed (mm/s)"
1551 #: Cura/util/profile.py:185
1553 "Speed at which infill parts are printed. If set to 0 then the print speed is "
1554 "used for the infill. Printing the infill faster can greatly reduce printing, "
1555 "but this can negatively effect print quality.."
1558 #: Cura/util/profile.py:186 Cura/util/profile.py:187 Cura/util/profile.py:194
1559 #: Cura/util/profile.py:195 Cura/util/profile.py:196 Cura/util/profile.py:197
1560 #: Cura/util/profile.py:198
1564 #: Cura/util/profile.py:186
1565 msgid "Minimal layer time (sec)"
1568 #: Cura/util/profile.py:186
1570 "Minimum time spend in a layer, gives the layer time to cool down before the "
1571 "next layer is put on top. If the layer will be placed down too fast the "
1572 "printer will slow down to make sure it has spend at least this amount of "
1573 "seconds printing this layer."
1576 #: Cura/util/profile.py:187
1577 msgid "Enable cooling fan"
1580 #: Cura/util/profile.py:187
1582 "Enable the cooling fan during the print. The extra cooling from the cooling "
1583 "fan is essential during faster prints."
1586 #: Cura/util/profile.py:189
1590 #: Cura/util/profile.py:189
1592 "The skirt is a line drawn around the object at the first layer. This helps "
1593 "to prime your extruder, and to see if the object fits on your platform.\n"
1594 "Setting this to 0 will disable the skirt. Multiple skirt lines can help "
1595 "priming your extruder better for small objects."
1598 #: Cura/util/profile.py:190
1599 msgid "Start distance (mm)"
1602 #: Cura/util/profile.py:190
1604 "The distance between the skirt and the first layer.\n"
1605 "This is the minimal distance, multiple skirt lines will be put outwards from "
1609 #: Cura/util/profile.py:191
1610 msgid "Minimal length (mm)"
1613 #: Cura/util/profile.py:191
1615 "The minimal length of the skirt, if this minimal length is not reached it "
1616 "will add more skirt lines to reach this minimal lenght.\n"
1617 "Note: If the line count is set to 0 this is ignored."
1620 #: Cura/util/profile.py:194
1621 msgid "Fan on layer number"
1624 #: Cura/util/profile.py:194
1626 "The layer at which the fan is turned on. The first layer is layer 0. The "
1627 "first layer can stick better if you turn on the fan on, on the 2nd layer."
1630 #: Cura/util/profile.py:195
1631 msgid "Fan speed min (%)"
1634 #: Cura/util/profile.py:195
1636 "When the fan is turned on, it is enabled at this speed setting. If cool "
1637 "slows down the layer, the fan is adjusted between the min and max speed. "
1638 "Minimal fan speed is used if the layer is not slowed down due to cooling."
1641 #: Cura/util/profile.py:196
1642 msgid "Fan speed max (%)"
1645 #: Cura/util/profile.py:196
1647 "When the fan is turned on, it is enabled at this speed setting. If cool "
1648 "slows down the layer, the fan is adjusted between the min and max speed. "
1649 "Maximal fan speed is used if the layer is slowed down due to cooling by more "
1653 #: Cura/util/profile.py:197
1654 msgid "Minimum speed (mm/s)"
1657 #: Cura/util/profile.py:197
1659 "The minimal layer time can cause the print to slow down so much it starts to "
1660 "ooze. The minimal feedrate protects against this. Even if a print gets slown "
1661 "down it will never be slower than this minimal speed."
1664 #: Cura/util/profile.py:198
1665 msgid "Cool head lift"
1668 #: Cura/util/profile.py:198
1670 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "
1671 "the extra time so the minimal layer time is always hit."
1674 #: Cura/util/profile.py:203 Cura/util/profile.py:204 Cura/util/profile.py:205
1678 #: Cura/util/profile.py:203
1679 msgid "Solid infill top"
1682 #: Cura/util/profile.py:203
1684 "Create a solid top surface, if set to false the top is filled with the fill "
1685 "percentage. Useful for cups/vases."
1688 #: Cura/util/profile.py:204
1689 msgid "Solid infill bottom"
1692 #: Cura/util/profile.py:204
1694 "Create a solid bottom surface, if set to false the bottom is filled with the "
1695 "fill percentage. Useful for buildings."
1698 #: Cura/util/profile.py:205
1699 msgid "Infill overlap (%)"
1702 #: Cura/util/profile.py:205
1704 "Amount of overlap between the infill and the walls. There is a slight "
1705 "overlap with the walls and the infill so the walls connect firmly to the "
1709 #: Cura/util/profile.py:206
1710 msgid "Fill amount (%)"
1713 #: Cura/util/profile.py:206
1716 "Amount of infill structure in the support material, less material gives "
1717 "weaker support which is easier to remove. 20% seems to be a good average."
1720 #: Cura/util/profile.py:207
1721 msgid "Distance X/Y (mm)"
1724 #: Cura/util/profile.py:207
1726 "Distance of the support material from the print, in the X/Y directions.\n"
1727 "0.7mm gives a nice distance from the print so the support does not stick to "
1731 #: Cura/util/profile.py:208
1732 msgid "Distance Z (mm)"
1735 #: Cura/util/profile.py:208
1737 "Distance from the top/bottom of the support to the print. A small gap here "
1738 "makes it easier to remove the support but makes the print a bit uglier.\n"
1739 "0.15mm gives a good seperation of the support material."
1742 #: Cura/util/profile.py:212
1746 #: Cura/util/profile.py:212
1747 msgid "Brim line amount"
1750 #: Cura/util/profile.py:212
1752 "The amount of lines used for a brim, more lines means a larger brim which "
1753 "sticks better, but this also makes your effective print area smaller."
1756 #: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215
1757 #: Cura/util/profile.py:216 Cura/util/profile.py:217 Cura/util/profile.py:218
1761 #: Cura/util/profile.py:213
1762 msgid "Extra margin (mm)"
1765 #: Cura/util/profile.py:213
1767 "If the raft is enabled, this is the extra raft area around the object which "
1768 "is also rafted. Increasing this margin will create a stronger raft while "
1769 "using more material and leaving less are for your print."
1772 #: Cura/util/profile.py:214
1773 msgid "Line spacing (mm)"
1776 #: Cura/util/profile.py:214
1778 "When you are using the raft this is the distance between the centerlines of "
1782 #: Cura/util/profile.py:215
1783 msgid "Base thickness (mm)"
1786 #: Cura/util/profile.py:215
1788 "When you are using the raft this is the thickness of the base layer which is "
1792 #: Cura/util/profile.py:216
1793 msgid "Base line width (mm)"
1796 #: Cura/util/profile.py:216
1798 "When you are using the raft this is the width of the base layer lines which "
1802 #: Cura/util/profile.py:217
1803 msgid "Interface thickness (mm)"
1806 #: Cura/util/profile.py:217
1808 "When you are using the raft this is the thickness of the interface layer "
1809 "which is put down."
1812 #: Cura/util/profile.py:218
1813 msgid "Interface line width (mm)"
1816 #: Cura/util/profile.py:218
1818 "When you are using the raft this is the width of the interface layer lines "
1819 "which are put down."
1822 #: Cura/util/profile.py:220 Cura/util/profile.py:221 Cura/util/profile.py:222
1823 #: Cura/util/profile.py:223
1824 msgid "Fix horrible"
1827 #: Cura/util/profile.py:220
1828 msgid "Combine everything (Type-A)"
1831 #: Cura/util/profile.py:220 Cura/util/profile.py:221
1833 "This expert option adds all parts of the model together. The result is "
1834 "usually that internal cavities disappear. Depending on the model this can be "
1835 "intended or not. Enabling this option is at your own risk. Type-A is "
1836 "depended on the model normals and tries to keep some internal holes intact. "
1837 "Type-B ignores all internal holes and only keeps the outside shape per layer."
1840 #: Cura/util/profile.py:221
1841 msgid "Combine everything (Type-B)"
1844 #: Cura/util/profile.py:222
1845 msgid "Keep open faces"
1848 #: Cura/util/profile.py:222
1850 "This expert option keeps all the open bits of the model intact. Normally "
1851 "Cura tries to stitch up small holes and remove everything with big holes, "
1852 "but this option keeps bits that are not properly part of anything and just "
1853 "goes with whatever it is left. This option is usually not what you want, but "
1854 "it might enable you to slice models otherwise failing to produce proper "
1856 "As with all \"Fix horrible\" options, results may vary and use at your own "
1860 #: Cura/util/profile.py:223
1861 msgid "Extensive stitching"
1864 #: Cura/util/profile.py:223
1866 "Extrensive stitching tries to fix up open holes in the model by closing the "
1867 "hole with touching polygons. This algorthm is quite expensive and could "
1868 "introduce a lot of processing time.\n"
1869 "As with all \"Fix horrible\" options, results may vary and use at your own "
1873 #: Cura/util/profile.py:338
1874 msgid "Save profile on slice"
1877 #: Cura/util/profile.py:338
1879 "When slicing save the profile as [stl_file]_profile.ini next to the model."
1882 #: Cura/util/profile.py:339
1883 msgid "Cost (price/kg)"
1886 #: Cura/util/profile.py:339
1887 msgid "Cost of your filament per kg, to estimate the cost of the final print."
1890 #: Cura/util/profile.py:340
1891 msgid "Cost (price/m)"
1894 #: Cura/util/profile.py:340
1896 "Cost of your filament per meter, to estimate the cost of the final print."
1899 #: Cura/util/profile.py:341
1900 msgid "Auto detect SD card drive"
1903 #: Cura/util/profile.py:341
1905 "Auto detect the SD card. You can disable this because on some systems "
1906 "external hard-drives or USB sticks are detected as SD card."
1909 #: Cura/util/profile.py:342
1910 msgid "Check for updates"
1913 #: Cura/util/profile.py:342
1914 msgid "Check for newer versions of Cura on startup"
1917 #: Cura/util/profile.py:343
1918 msgid "Send usage statistics"
1921 #: Cura/util/profile.py:343
1922 msgid "Submit anonymous usage information to improve next versions of Cura"
1925 #: Cura/util/profile.py:345
1926 msgid "Density (kg/m3)"
1929 #: Cura/util/profile.py:345
1931 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
1932 "This value is used to estimate the weight if the filament used for the print."
1935 #: Cura/util/profile.py:348
1936 msgid "Model colour"
1939 #: Cura/util/profile.py:349
1940 msgid "Model colour (2)"
1943 #: Cura/util/profile.py:350
1944 msgid "Model colour (3)"
1947 #: Cura/util/profile.py:351
1948 msgid "Model colour (4)"
1951 #: Cura/util/profile.py:362
1952 msgid "Maximum width (mm)"
1955 #: Cura/util/profile.py:362 Cura/util/profile.py:363 Cura/util/profile.py:364
1956 msgid "Size of the machine in mm"
1959 #: Cura/util/profile.py:363
1960 msgid "Maximum depth (mm)"
1963 #: Cura/util/profile.py:364
1964 msgid "Maximum height (mm)"
1967 #: Cura/util/profile.py:367
1969 "If you have an heated bed, this enabled heated bed settings (requires "
1973 #: Cura/util/profile.py:368
1974 msgid "GCode Flavor"
1977 #: Cura/util/profile.py:368
1979 "Flavor of generated GCode.\n"
1980 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
1981 "UltiGCode is a variation of the RepRap GCode which puts more settings in the "
1982 "machine instead of the slicer."
1985 #: Cura/util/profile.py:369
1986 msgid "Extruder count"
1989 #: Cura/util/profile.py:369
1990 msgid "Amount of extruders in your machine."
1993 #: Cura/util/profile.py:370 Cura/util/profile.py:372 Cura/util/profile.py:374
1997 #: Cura/util/profile.py:370 Cura/util/profile.py:371
1998 msgid "The offset of your secondary extruder compared to the primary."
2001 #: Cura/util/profile.py:371 Cura/util/profile.py:373 Cura/util/profile.py:375
2005 #: Cura/util/profile.py:372 Cura/util/profile.py:373
2006 msgid "The offset of your tertiary extruder compared to the primary."
2009 #: Cura/util/profile.py:374 Cura/util/profile.py:375
2010 msgid "The offset of your forth extruder compared to the primary."
2013 #: Cura/util/profile.py:376
2014 msgid "E-Steps per 1mm filament"
2017 #: Cura/util/profile.py:376
2019 "Amount of steps per mm filament extrusion. If set to 0 then this value is "
2020 "ignored and the value in your firmware is used."
2023 #: Cura/util/profile.py:377
2027 #: Cura/util/profile.py:377
2028 msgid "Serial port to use for communication with the printer"
2031 #: Cura/util/profile.py:379
2035 #: Cura/util/profile.py:379
2037 "Speed of the serial port communication\n"
2038 "Needs to match your firmware settings\n"
2039 "Common values are 250000, 115200, 57600"
2042 #: Cura/util/profile.py:382
2043 msgid "Head size towards X min (mm)"
2046 #: Cura/util/profile.py:382
2048 "The head size when printing multiple objects, measured from the tip of the "
2049 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
2050 "is on the left side."
2053 #: Cura/util/profile.py:383
2054 msgid "Head size towards Y min (mm)"
2057 #: Cura/util/profile.py:383 Cura/util/profile.py:384
2059 "The head size when printing multiple objects, measured from the tip of the "
2060 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
2061 "is on the left side."
2064 #: Cura/util/profile.py:384
2065 msgid "Head size towards X max (mm)"
2068 #: Cura/util/profile.py:385
2069 msgid "Head size towards Y max (mm)"
2072 #: Cura/util/profile.py:385
2074 "The head size when printing multiple objects, measured from the tip of the "
2075 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
2076 "is on the left side."
2079 #: Cura/util/profile.py:386
2080 msgid "Printer gantry height (mm)"
2083 #: Cura/util/profile.py:386
2085 "The height of the gantry holding up the printer head. If an object is higher "
2086 "then this then you cannot print multiple objects one for one. 60mm for an "