1 from __future__ import absolute_import
4 import wx, os, platform, types, webbrowser, shutil, glob
6 from gui import configBase
7 from gui import expertConfig
8 from gui import preview3d
9 from gui import sliceProgessPanel
10 from gui import alterationPanel
11 from gui import pluginPanel
12 from gui import preferencesDialog
13 from gui import configWizard
14 from gui import firmwareInstall
15 from gui import printWindow
16 from gui import simpleMode
17 from gui import projectPlanner
18 from gui import batchRun
19 from gui import flatSlicerWindow
21 from gui import dropTarget
22 from util import validators
23 from util import profile
24 from util import version
25 from util import sliceRun
26 from util import meshLoader
30 if profile.getPreference('machine_type') == 'unknown':
31 if platform.system() == "Darwin":
32 #Check if we need to copy our examples
33 exampleFile = os.path.expanduser('~/CuraExamples/UltimakerRobot_support.stl')
34 if not os.path.isfile(exampleFile):
36 os.makedirs(os.path.dirname(exampleFile))
39 for filename in glob.glob(os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'example', '*.*'))):
40 shutil.copy(filename, os.path.join(os.path.dirname(exampleFile), os.path.basename(filename)))
41 profile.putPreference('lastFile', exampleFile)
42 configWizard.configWizard()
43 if profile.getPreference('startMode') == 'Simple':
44 simpleMode.simpleModeWindow()
49 class mainWindow(configBase.configWindowBase):
50 "Main user interface window"
52 super(mainWindow, self).__init__(title='Cura - ' + version.getVersion())
54 extruderCount = int(profile.getPreference('extruder_amount'))
56 wx.EVT_CLOSE(self, self.OnClose)
57 #self.SetIcon(icon.getMainIcon())
59 self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.supportedExtensions()))
61 menubar = wx.MenuBar()
63 i = fileMenu.Append(-1, 'Load model file...\tCTRL+L')
64 self.Bind(wx.EVT_MENU, lambda e: self._showModelLoadDialog(1), i)
65 i = fileMenu.Append(-1, 'Prepare print...\tCTRL+R')
66 self.Bind(wx.EVT_MENU, self.OnSlice, i)
67 i = fileMenu.Append(-1, 'Print...\tCTRL+P')
68 self.Bind(wx.EVT_MENU, self.OnPrint, i)
70 fileMenu.AppendSeparator()
71 i = fileMenu.Append(-1, 'Open Profile...')
72 self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
73 i = fileMenu.Append(-1, 'Save Profile...')
74 self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
75 i = fileMenu.Append(-1, 'Load Profile from GCode...')
76 self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
77 fileMenu.AppendSeparator()
78 i = fileMenu.Append(-1, 'Reset Profile to default')
79 self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
80 fileMenu.AppendSeparator()
81 i = fileMenu.Append(-1, 'Preferences...\tCTRL+,')
82 self.Bind(wx.EVT_MENU, self.OnPreferences, i)
83 fileMenu.AppendSeparator()
84 i = fileMenu.Append(wx.ID_EXIT, 'Quit')
85 self.Bind(wx.EVT_MENU, self.OnQuit, i)
86 menubar.Append(fileMenu, '&File')
89 i = toolsMenu.Append(-1, 'Switch to Quickprint...')
90 self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
91 toolsMenu.AppendSeparator()
92 i = toolsMenu.Append(-1, 'Batch run...')
93 self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
94 i = toolsMenu.Append(-1, 'Project planner...')
95 self.Bind(wx.EVT_MENU, self.OnProjectPlanner, i)
96 # i = toolsMenu.Append(-1, 'Open SVG (2D) slicer...')
97 # self.Bind(wx.EVT_MENU, self.OnSVGSlicerOpen, i)
98 menubar.Append(toolsMenu, 'Tools')
100 expertMenu = wx.Menu()
101 i = expertMenu.Append(-1, 'Open expert settings...')
102 self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
103 expertMenu.AppendSeparator()
104 if firmwareInstall.getDefaultFirmware() != None:
105 i = expertMenu.Append(-1, 'Install default Marlin firmware')
106 self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, i)
107 i = expertMenu.Append(-1, 'Install custom firmware')
108 self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
109 expertMenu.AppendSeparator()
110 i = expertMenu.Append(-1, 'ReRun first run wizard...')
111 self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
112 menubar.Append(expertMenu, 'Expert')
115 i = helpMenu.Append(-1, 'Online documentation...')
116 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('http://daid.github.com/Cura'), i)
117 i = helpMenu.Append(-1, 'Report a problem...')
118 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
119 menubar.Append(helpMenu, 'Help')
120 self.SetMenuBar(menubar)
122 if profile.getPreference('lastFile') != '':
123 self.filelist = profile.getPreference('lastFile').split(';')
124 self.SetTitle('Cura - %s - %s' % (version.getVersion(), self.filelist[-1]))
127 self.progressPanelList = []
130 self.preview3d = preview3d.previewPanel(self)
133 nb = wx.Notebook(self)
135 (left, right) = self.CreateConfigTab(nb, 'Print config')
137 configBase.TitleRow(left, "Quality")
138 c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
139 validators.validFloat(c, 0.0001)
140 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
141 c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
142 validators.validFloat(c, 0.0001)
143 validators.wallThicknessValidator(c)
144 c = configBase.SettingRow(left, "Enable retraction", 'retraction_enable', False, 'Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab.')
146 configBase.TitleRow(left, "Fill")
147 c = configBase.SettingRow(left, "Bottom/Top thickness (mm)", 'solid_layer_thickness', '0.6', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiply of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part.')
148 validators.validFloat(c, 0.0)
149 c = configBase.SettingRow(left, "Fill Density (%)", 'fill_density', '20', 'This controls how densily filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough')
150 validators.validFloat(c, 0.0, 100.0)
152 configBase.TitleRow(right, "Speed && Temperature")
153 c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
154 validators.validFloat(c, 1.0)
155 validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
156 validators.printSpeedValidator(c)
158 #configBase.TitleRow(right, "Temperature")
159 c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
160 validators.validFloat(c, 0.0, 340.0)
161 validators.warningAbove(c, 260.0, "Temperatures above 260C could damage your machine, be careful!")
162 if profile.getPreference('has_heated_bed') == 'True':
163 c = configBase.SettingRow(right, "Bed temperature", 'print_bed_temperature', '0', 'Temperature used for the heated printer bed. Set at 0 to pre-heat yourself')
164 validators.validFloat(c, 0.0, 340.0)
166 configBase.TitleRow(right, "Support structure")
167 c = configBase.SettingRow(right, "Support type", 'support', ['None', 'Exterior Only', 'Everywhere'], 'Type of support structure build.\n"Exterior only" is the most commonly used support setting.\n\nNone does not do any support.\nExterior only only creates support where the support structure will touch the build platform.\nEverywhere creates support even on the insides of the model.')
168 c = configBase.SettingRow(right, "Add raft", 'enable_raft', False, 'A raft is a few layers of lines below the bottom of the object. It prevents warping. Full raft settings can be found in the expert settings.\nFor PLA this is usually not required. But if you print with ABS it is almost required.')
169 if extruderCount > 1:
170 c = configBase.SettingRow(right, "Support dual extrusion", 'support_dual_extrusion', False, 'Print the support material with the 2nd extruder in a dual extrusion setup. The primary extruder will be used for normal material, while the second extruder is used to print support material.')
172 configBase.TitleRow(right, "Filament")
173 c = configBase.SettingRow(right, "Diameter (mm)", 'filament_diameter', '2.89', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to callibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
174 validators.validFloat(c, 1.0)
175 validators.warningAbove(c, 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
176 c = configBase.SettingRow(right, "Packing Density", 'filament_density', '1.00', 'Packing density of your filament. This should be 1.00 for PLA and 0.85 for ABS')
177 validators.validFloat(c, 0.5, 1.5)
179 (left, right) = self.CreateConfigTab(nb, 'Advanced config')
181 configBase.TitleRow(left, "Machine size")
182 c = configBase.SettingRow(left, "Nozzle size (mm)", 'nozzle_size', '0.4', 'The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings.')
183 validators.validFloat(c, 0.1, 10.0)
185 configBase.TitleRow(left, "Skirt")
186 c = configBase.SettingRow(left, "Line count", 'skirt_line_count', '1', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects.')
187 validators.validInt(c, 0, 10)
188 c = configBase.SettingRow(left, "Start distance (mm)", 'skirt_gap', '6.0', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
189 validators.validFloat(c, 0.0)
191 configBase.TitleRow(left, "Retraction")
192 c = configBase.SettingRow(left, "Minimum travel (mm)", 'retraction_min_travel', '5.0', 'Minimum amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area')
193 validators.validFloat(c, 0.0)
194 c = configBase.SettingRow(left, "Speed (mm/s)", 'retraction_speed', '40.0', 'Speed at which the filament is retracted, a higher retraction speed works better. But a very high retraction speed can lead to filament grinding.')
195 validators.validFloat(c, 0.1)
196 c = configBase.SettingRow(left, "Distance (mm)", 'retraction_amount', '0.0', 'Amount of retraction, set at 0 for no retraction at all. A value of 2.0mm seems to generate good results.')
197 validators.validFloat(c, 0.0)
198 c = configBase.SettingRow(left, "Extra length on start (mm)", 'retraction_extra', '0.0', 'Extra extrusion amount when restarting after a retraction, to better "Prime" your extruder after retraction.')
199 validators.validFloat(c, 0.0)
201 configBase.TitleRow(right, "Speed")
202 c = configBase.SettingRow(right, "Travel speed (mm/s)", 'travel_speed', '150', 'Speed at which travel moves are done, a high quality build Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then.')
203 validators.validFloat(c, 1.0)
204 validators.warningAbove(c, 300.0, "It is highly unlikely that your machine can achieve a travel speed above 300mm/s")
205 c = configBase.SettingRow(right, "Max Z speed (mm/s)", 'max_z_speed', '1.0', 'Speed at which Z moves are done. When you Z axis is properly lubercated you can increase this for less Z blob.')
206 validators.validFloat(c, 0.5)
207 c = configBase.SettingRow(right, "Bottom layer speed (mm/s)", 'bottom_layer_speed', '25', 'Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed.')
208 validators.validFloat(c, 0.0)
210 configBase.TitleRow(right, "Cool")
211 c = configBase.SettingRow(right, "Minimal layer time (sec)", 'cool_min_layer_time', '10', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend atleast this amount of seconds printing this layer.')
212 validators.validFloat(c, 0.0)
213 c = configBase.SettingRow(right, "Enable cooling fan", 'fan_enabled', True, 'Enable the cooling fan during the print. The extra cooling from the cooling fan is essensial during faster prints.')
215 configBase.TitleRow(right, "Quality")
216 c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
217 validators.validFloat(c, 0.0)
218 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
219 c = configBase.SettingRow(right, "Duplicate outlines", 'enable_skin', False, 'Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality.')
222 self.pluginPanel = pluginPanel.pluginPanel(nb)
223 if len(self.pluginPanel.pluginList) > 0:
224 nb.AddPage(self.pluginPanel, "Plugins")
226 self.pluginPanel.Show(False)
229 self.alterationPanel = alterationPanel.alterationPanel(nb)
230 nb.AddPage(self.alterationPanel, "Start/End-GCode")
232 # load and slice buttons.
233 loadButton = wx.Button(self, -1, '&Load model')
234 sliceButton = wx.Button(self, -1, 'P&repare print')
235 printButton = wx.Button(self, -1, '&Print')
236 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(1), loadButton)
237 self.Bind(wx.EVT_BUTTON, self.OnSlice, sliceButton)
238 self.Bind(wx.EVT_BUTTON, self.OnPrint, printButton)
240 if extruderCount > 1:
241 loadButton2 = wx.Button(self, -1, 'Load Dual')
242 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(2), loadButton2)
243 if extruderCount > 2:
244 loadButton3 = wx.Button(self, -1, 'Load Triple')
245 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(3), loadButton3)
246 if extruderCount > 3:
247 loadButton4 = wx.Button(self, -1, 'Load Quad')
248 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(4), loadButton4)
250 #Also bind double clicking the 3D preview to load an STL file.
251 self.preview3d.glCanvas.Bind(wx.EVT_LEFT_DCLICK, lambda e: self._showModelLoadDialog(1), self.preview3d.glCanvas)
253 #Main sizer, to position the preview window, buttons and tab control
254 sizer = wx.GridBagSizer()
256 sizer.Add(nb, (0,0), span=(1,1), flag=wx.EXPAND)
257 sizer.Add(self.preview3d, (0,1), span=(1,2+extruderCount), flag=wx.EXPAND)
258 sizer.AddGrowableCol(2 + extruderCount)
259 sizer.AddGrowableRow(0)
260 sizer.Add(loadButton, (1,1), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
261 if extruderCount > 1:
262 sizer.Add(loadButton2, (1,2), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
263 if extruderCount > 2:
264 sizer.Add(loadButton3, (1,3), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
265 if extruderCount > 3:
266 sizer.Add(loadButton4, (1,4), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
267 sizer.Add(sliceButton, (1,1+extruderCount), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
268 sizer.Add(printButton, (1,2+extruderCount), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
271 if len(self.filelist) > 0:
272 self.preview3d.loadModelFiles(self.filelist)
274 self.updateProfileToControls()
276 self.SetBackgroundColour(nb.GetBackgroundColour())
279 if wx.Display().GetClientArea().GetWidth() < self.GetSize().GetWidth():
280 f = self.GetSize().GetWidth() - wx.Display().GetClientArea().GetWidth()
281 self.preview3d.SetMinSize(self.preview3d.GetMinSize().DecBy(f, 0))
284 self.SetMinSize(self.GetSize())
288 def OnLoadProfile(self, e):
289 dlg=wx.FileDialog(self, "Select profile file to load", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
290 dlg.SetWildcard("ini files (*.ini)|*.ini")
291 if dlg.ShowModal() == wx.ID_OK:
292 profileFile = dlg.GetPath()
293 profile.loadGlobalProfile(profileFile)
294 self.updateProfileToControls()
297 def OnLoadProfileFromGcode(self, e):
298 dlg=wx.FileDialog(self, "Select gcode file to load profile from", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
299 dlg.SetWildcard("gcode files (*.gcode)|*.gcode;*.g")
300 if dlg.ShowModal() == wx.ID_OK:
301 gcodeFile = dlg.GetPath()
302 f = open(gcodeFile, 'r')
305 if line.startswith(';CURA_PROFILE_STRING:'):
306 profile.loadGlobalProfileFromString(line[line.find(':')+1:].strip())
309 self.updateProfileToControls()
311 wx.MessageBox('No profile found in GCode file.\nThis feature only works with GCode files made by Cura 12.07 or newer.', 'Profile load error', wx.OK | wx.ICON_INFORMATION)
314 def OnSaveProfile(self, e):
315 dlg=wx.FileDialog(self, "Select profile file to save", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
316 dlg.SetWildcard("ini files (*.ini)|*.ini")
317 if dlg.ShowModal() == wx.ID_OK:
318 profileFile = dlg.GetPath()
319 profile.saveGlobalProfile(profileFile)
322 def OnResetProfile(self, e):
323 dlg = wx.MessageDialog(self, 'This will reset all profile settings to defaults.\nUnless you have saved your current profile, all settings will be lost!\nDo you really want to reset?', 'Profile reset', wx.YES_NO | wx.ICON_QUESTION)
324 result = dlg.ShowModal() == wx.ID_YES
327 profile.resetGlobalProfile()
328 self.updateProfileToControls()
330 def OnBatchRun(self, e):
331 br = batchRun.batchRunWindow(self)
335 def OnPreferences(self, e):
336 prefDialog = preferencesDialog.preferencesDialog(self)
338 prefDialog.Show(True)
340 def OnSimpleSwitch(self, e):
341 profile.putPreference('startMode', 'Simple')
342 simpleMode.simpleModeWindow()
345 def OnDefaultMarlinFirmware(self, e):
346 firmwareInstall.InstallFirmware()
348 def OnCustomFirmware(self, e):
349 if profile.getPreference('machine_type') == 'ultimaker':
350 wx.MessageBox('Warning: Installing a custom firmware does not garantee that you machine will function correctly, and could damage your machine.', 'Firmware update', wx.OK | wx.ICON_EXCLAMATION)
351 dlg=wx.FileDialog(self, "Open firmware to upload", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
352 dlg.SetWildcard("HEX file (*.hex)|*.hex;*.HEX")
353 if dlg.ShowModal() == wx.ID_OK:
354 filename = dlg.GetPath()
355 if not(os.path.exists(filename)):
357 #For some reason my Ubuntu 10.10 crashes here.
358 firmwareInstall.InstallFirmware(filename)
360 def OnFirstRunWizard(self, e):
361 configWizard.configWizard()
362 self.updateProfileToControls()
364 def _showOpenDialog(self, title, wildcard = meshLoader.wildcardFilter()):
365 dlg=wx.FileDialog(self, title, os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
366 dlg.SetWildcard(wildcard)
367 if dlg.ShowModal() == wx.ID_OK:
368 filename = dlg.GetPath()
370 if not(os.path.exists(filename)):
372 profile.putPreference('lastFile', filename)
377 def _showModelLoadDialog(self, amount):
379 for i in xrange(0, amount):
380 filelist.append(self._showOpenDialog("Open file to print"))
381 if filelist[-1] == False:
383 self._loadModels(filelist)
385 def _loadModels(self, filelist):
386 self.filelist = filelist
387 self.SetTitle(filelist[-1] + ' - Cura - ' + version.getVersion())
388 profile.putPreference('lastFile', ';'.join(self.filelist))
389 self.preview3d.loadModelFiles(self.filelist, True)
390 self.preview3d.setViewMode("Normal")
392 def OnDropFiles(self, filenames):
393 self._loadModels(filenames)
395 def OnLoadModel(self, e):
396 self._showModelLoadDialog(1)
398 def OnLoadModel2(self, e):
399 self._showModelLoadDialog(2)
401 def OnLoadModel3(self, e):
402 self._showModelLoadDialog(3)
404 def OnLoadModel4(self, e):
405 self._showModelLoadDialog(4)
407 def OnSlice(self, e):
408 if len(self.filelist) < 1:
409 wx.MessageBox('You need to load a file before you can prepare it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
411 #Create a progress panel and add it to the window. The progress panel will start the Skein operation.
412 spp = sliceProgessPanel.sliceProgessPanel(self, self, self.filelist)
413 self.sizer.Add(spp, (len(self.progressPanelList)+2,0), span=(1,4), flag=wx.EXPAND)
415 newSize = self.GetSize();
416 newSize.IncBy(0, spp.GetSize().GetHeight())
417 if newSize.GetWidth() < wx.GetDisplaySize()[0]:
418 self.SetSize(newSize)
419 self.progressPanelList.append(spp)
421 def OnPrint(self, e):
422 if len(self.filelist) < 1:
423 wx.MessageBox('You need to load a file and prepare it before you can print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
425 if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
426 wx.MessageBox('You need to prepare a print before you can run the actual print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
428 printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
430 def OnExpertOpen(self, e):
431 ecw = expertConfig.expertConfigWindow()
435 def OnProjectPlanner(self, e):
436 pp = projectPlanner.projectPlanner()
440 def OnSVGSlicerOpen(self, e):
441 svgSlicer = flatSlicerWindow.flatSlicerWindow()
445 def removeSliceProgress(self, spp):
446 self.progressPanelList.remove(spp)
447 newSize = self.GetSize();
448 newSize.IncBy(0, -spp.GetSize().GetHeight())
449 if newSize.GetWidth() < wx.GetDisplaySize()[0]:
450 self.SetSize(newSize)
452 self.sizer.Detach(spp)
453 for spp in self.progressPanelList:
454 self.sizer.Detach(spp)
456 for spp in self.progressPanelList:
457 self.sizer.Add(spp, (i,0), span=(1,4), flag=wx.EXPAND)
464 def OnClose(self, e):
465 profile.saveGlobalProfile(profile.getDefaultProfilePath())
468 def updateProfileToControls(self):
469 super(mainWindow, self).updateProfileToControls()
470 self.preview3d.updateProfileToControls()
471 self.alterationPanel.updateProfileToControls()
472 self.pluginPanel.updateProfileToControls()