1 from __future__ import absolute_import
4 import wx, os, platform, types, webbrowser, shutil, glob
6 from gui import configBase
7 from gui import expertConfig
8 from gui import preview3d
9 from gui import sliceProgessPanel
10 from gui import alterationPanel
11 from gui import preferencesDialog
12 from gui import configWizard
13 from gui import firmwareInstall
14 from gui import printWindow
15 from gui import simpleMode
16 from gui import projectPlanner
17 from gui import batchRun
18 from gui import flatSlicerWindow
20 from gui import dropTarget
21 from util import validators
22 from util import profile
23 from util import version
24 from util import sliceRun
25 from util import meshLoader
29 if profile.getPreference('machine_type') == 'unknown':
30 if platform.system() == "Darwin":
31 #Check if we need to copy our examples
32 exampleFile = os.path.expanduser('~/CuraExamples/UltimakerRobot_support.stl')
33 if not os.path.isfile(exampleFile):
35 os.makedirs(os.path.dirname(exampleFile))
38 for filename in glob.glob(os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'example', '*.*'))):
39 shutil.copy(filename, os.path.join(os.path.dirname(exampleFile), os.path.basename(filename)))
40 profile.putPreference('lastFile', exampleFile)
42 configWizard.configWizard()
43 if profile.getPreference('startMode') == 'Simple':
44 simpleMode.simpleModeWindow()
49 class mainWindow(configBase.configWindowBase):
50 "Main user interface window"
52 super(mainWindow, self).__init__(title='Cura - ' + version.getVersion())
54 extruderCount = int(profile.getPreference('extruder_amount'))
56 wx.EVT_CLOSE(self, self.OnClose)
57 #self.SetIcon(icon.getMainIcon())
59 self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.supportedExtensions()))
61 menubar = wx.MenuBar()
63 i = fileMenu.Append(-1, 'Load model file...\tCTRL+L')
64 self.Bind(wx.EVT_MENU, lambda e: self._showModelLoadDialog(1), i)
65 i = fileMenu.Append(-1, 'Prepare print...\tCTRL+R')
66 self.Bind(wx.EVT_MENU, self.OnSlice, i)
67 i = fileMenu.Append(-1, 'Print...\tCTRL+P')
68 self.Bind(wx.EVT_MENU, self.OnPrint, i)
70 fileMenu.AppendSeparator()
71 i = fileMenu.Append(-1, 'Open Profile...')
72 self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
73 i = fileMenu.Append(-1, 'Save Profile...')
74 self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
75 i = fileMenu.Append(-1, 'Load Profile from GCode...')
76 self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
77 fileMenu.AppendSeparator()
78 i = fileMenu.Append(-1, 'Reset Profile to default')
79 self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
80 fileMenu.AppendSeparator()
81 i = fileMenu.Append(-1, 'Preferences...\tCTRL+,')
82 self.Bind(wx.EVT_MENU, self.OnPreferences, i)
83 fileMenu.AppendSeparator()
84 i = fileMenu.Append(wx.ID_EXIT, 'Quit')
85 self.Bind(wx.EVT_MENU, self.OnQuit, i)
86 menubar.Append(fileMenu, '&File')
89 i = toolsMenu.Append(-1, 'Switch to Quickprint...')
90 self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
91 toolsMenu.AppendSeparator()
92 i = toolsMenu.Append(-1, 'Batch run...')
93 self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
94 i = toolsMenu.Append(-1, 'Project planner...')
95 self.Bind(wx.EVT_MENU, self.OnProjectPlanner, i)
96 # i = toolsMenu.Append(-1, 'Open SVG (2D) slicer...')
97 # self.Bind(wx.EVT_MENU, self.OnSVGSlicerOpen, i)
98 menubar.Append(toolsMenu, 'Tools')
100 expertMenu = wx.Menu()
101 i = expertMenu.Append(-1, 'Open expert settings...')
102 self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
103 expertMenu.AppendSeparator()
104 if firmwareInstall.getDefaultFirmware() != None:
105 i = expertMenu.Append(-1, 'Install default Marlin firmware')
106 self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, i)
107 i = expertMenu.Append(-1, 'Install custom firmware')
108 self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
109 expertMenu.AppendSeparator()
110 i = expertMenu.Append(-1, 'ReRun first run wizard...')
111 self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
112 menubar.Append(expertMenu, 'Expert')
115 i = helpMenu.Append(-1, 'Online documentation...')
116 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://daid.github.com/Cura'), i)
117 i = helpMenu.Append(-1, 'Report a problem...')
118 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
119 menubar.Append(helpMenu, 'Help')
120 self.SetMenuBar(menubar)
122 if profile.getPreference('lastFile') != '':
123 self.filelist = profile.getPreference('lastFile').split(';')
124 self.SetTitle('Cura - %s - %s' % (version.getVersion(), self.filelist[-1]))
127 self.progressPanelList = []
130 self.preview3d = preview3d.previewPanel(self)
133 nb = wx.Notebook(self)
135 (left, right) = self.CreateConfigTab(nb, 'Print config')
137 configBase.TitleRow(left, "Accuracy")
138 c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
139 validators.validFloat(c, 0.0001)
140 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
141 c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
142 validators.validFloat(c, 0.0001)
143 validators.wallThicknessValidator(c)
144 c = configBase.SettingRow(left, "Enable retraction", 'retraction_enable', False, 'Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab.')
146 configBase.TitleRow(left, "Fill")
147 c = configBase.SettingRow(left, "Bottom/Top thickness (mm)", 'solid_layer_thickness', '0.6', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiply of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part.')
148 validators.validFloat(c, 0.0)
149 c = configBase.SettingRow(left, "Fill Density (%)", 'fill_density', '20', 'This controls how densily filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough')
150 validators.validFloat(c, 0.0, 100.0)
152 configBase.TitleRow(left, "Skirt")
153 c = configBase.SettingRow(left, "Line count", 'skirt_line_count', '1', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects.')
154 validators.validInt(c, 0, 10)
155 c = configBase.SettingRow(left, "Start distance (mm)", 'skirt_gap', '6.0', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
156 validators.validFloat(c, 0.0)
158 configBase.TitleRow(right, "Speed && Temperature")
159 c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
160 validators.validFloat(c, 1.0)
161 validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
162 validators.printSpeedValidator(c)
164 #configBase.TitleRow(right, "Temperature")
165 c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
166 validators.validFloat(c, 0.0, 340.0)
167 validators.warningAbove(c, 260.0, "Temperatures above 260C could damage your machine, be careful!")
168 if profile.getPreference('has_heated_bed') == 'True':
169 c = configBase.SettingRow(right, "Bed temperature", 'print_bed_temperature', '0', 'Temperature used for the heated printer bed. Set at 0 to pre-heat yourself')
170 validators.validFloat(c, 0.0, 340.0)
172 configBase.TitleRow(right, "Support structure")
173 c = configBase.SettingRow(right, "Support type", 'support', ['None', 'Exterior Only', 'Everywhere'], 'Type of support structure build.\n"Exterior only" is the most commonly used support setting.\n\nNone does not do any support.\nExterior only only creates support where the support structure will touch the build platform.\nEverywhere creates support even on the insides of the model.')
174 c = configBase.SettingRow(right, "Add raft", 'enable_raft', False, 'A raft is a few layers of lines below the bottom of the object. It prevents warping. Full raft settings can be found in the expert settings.\nFor PLA this is usually not required. But if you print with ABS it is almost required.')
175 if extruderCount > 1:
176 c = configBase.SettingRow(right, "Support dual extrusion", 'support_dual_extrusion', False, 'Print the support material with the 2nd extruder in a dual extrusion setup. The primary extruder will be used for normal material, while the second extruder is used to print support material.')
178 configBase.TitleRow(right, "Filament")
179 c = configBase.SettingRow(right, "Diameter (mm)", 'filament_diameter', '2.89', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to callibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
180 validators.validFloat(c, 1.0)
181 validators.warningAbove(c, 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
182 c = configBase.SettingRow(right, "Packing Density", 'filament_density', '1.00', 'Packing density of your filament. This should be 1.00 for PLA and 0.85 for ABS')
183 validators.validFloat(c, 0.5, 1.5)
185 (left, right) = self.CreateConfigTab(nb, 'Advanced config')
187 configBase.TitleRow(left, "Machine size")
188 c = configBase.SettingRow(left, "Nozzle size (mm)", 'nozzle_size', '0.4', 'The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings.')
189 validators.validFloat(c, 0.1, 10.0)
190 c = configBase.SettingRow(left, "Machine center X (mm)", 'machine_center_x', '100', 'The center of your machine, your print will be placed at this location')
191 validators.validInt(c, 10)
192 configBase.settingNotify(c, self.preview3d.updateCenterX)
193 c = configBase.SettingRow(left, "Machine center Y (mm)", 'machine_center_y', '100', 'The center of your machine, your print will be placed at this location')
194 validators.validInt(c, 10)
195 configBase.settingNotify(c, self.preview3d.updateCenterY)
197 configBase.TitleRow(left, "Retraction")
198 c = configBase.SettingRow(left, "Minimal travel (mm)", 'retraction_min_travel', '5.0', 'Minimal amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area')
199 validators.validFloat(c, 0.0)
200 c = configBase.SettingRow(left, "Speed (mm/s)", 'retraction_speed', '40.0', 'Speed at which the filament is retracted, a higher retraction speed works better. But a very high retraction speed can lead to filament grinding.')
201 validators.validFloat(c, 0.1)
202 c = configBase.SettingRow(left, "Distance (mm)", 'retraction_amount', '0.0', 'Amount of retraction, set at 0 for no retraction at all. A value of 2.0mm seems to generate good results.')
203 validators.validFloat(c, 0.0)
204 c = configBase.SettingRow(left, "Extra length on start (mm)", 'retraction_extra', '0.0', 'Extra extrusion amount when restarting after a retraction, to better "Prime" your extruder after retraction.')
205 validators.validFloat(c, 0.0)
207 configBase.TitleRow(right, "Speed")
208 c = configBase.SettingRow(right, "Travel speed (mm/s)", 'travel_speed', '150', 'Speed at which travel moves are done, a high quality build Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then.')
209 validators.validFloat(c, 1.0)
210 validators.warningAbove(c, 300.0, "It is highly unlikely that your machine can achieve a travel speed above 300mm/s")
211 c = configBase.SettingRow(right, "Max Z speed (mm/s)", 'max_z_speed', '1.0', 'Speed at which Z moves are done. When you Z axis is properly lubercated you can increase this for less Z blob.')
212 validators.validFloat(c, 0.5)
213 c = configBase.SettingRow(right, "Bottom layer speed (mm/s)", 'bottom_layer_speed', '25', 'Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed.')
214 validators.validFloat(c, 0.0)
216 configBase.TitleRow(right, "Cool")
217 c = configBase.SettingRow(right, "Minimal layer time (sec)", 'cool_min_layer_time', '10', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend atleast this amount of seconds printing this layer.')
218 validators.validFloat(c, 0.0)
219 c = configBase.SettingRow(right, "Enable cooling fan", 'fan_enabled', True, 'Enable the cooling fan during the print. The extra cooling from the cooling fan is essensial during faster prints.')
221 configBase.TitleRow(right, "Accuracy")
222 c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
223 validators.validFloat(c, 0.0)
224 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
225 c = configBase.SettingRow(right, "Enable 'skin'", 'enable_skin', False, 'Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality.')
228 self.effectList = profile.getEffectsList()
229 if len(self.effectList) > 0:
230 self.effectPanel = wx.Panel(nb)
231 sizer = wx.GridBagSizer(2, 2)
232 self.effectPanel.SetSizer(sizer)
234 effectStringList = []
235 for effect in self.effectList:
236 effectStringList.append(effect['name'])
238 self.listbox = wx.ListBox(self.effectPanel, -1, choices=effectStringList)
239 title = wx.StaticText(self.effectPanel, -1, "Effects:")
240 title.SetFont(wx.Font(wx.SystemSettings.GetFont(wx.SYS_ANSI_VAR_FONT).GetPointSize(), wx.FONTFAMILY_DEFAULT, wx.NORMAL, wx.FONTWEIGHT_BOLD))
241 addButton = wx.Button(self.effectPanel, -1, '>', style=wx.BU_EXACTFIT)
242 remButton = wx.Button(self.effectPanel, -1, '<', style=wx.BU_EXACTFIT)
243 sizer.Add(self.listbox, (1,0), span=(2,1), border=10, flag=wx.EXPAND|wx.LEFT|wx.RIGHT|wx.BOTTOM)
244 sizer.Add(title, (0,0), border=10, flag=wx.ALIGN_CENTER_VERTICAL|wx.LEFT|wx.TOP)
245 sizer.Add(addButton, (1,1), border=5, flag=wx.ALIGN_CENTER_HORIZONTAL|wx.ALIGN_BOTTOM)
246 sizer.Add(remButton, (2,1), border=5, flag=wx.ALIGN_CENTER_HORIZONTAL|wx.ALIGN_TOP)
248 sizer.AddGrowableCol(2)
249 sizer.AddGrowableRow(1)
250 sizer.AddGrowableRow(2)
251 nb.AddPage(self.effectPanel, "Effects")
254 self.alterationPanel = alterationPanel.alterationPanel(nb)
255 nb.AddPage(self.alterationPanel, "Start/End-GCode")
257 # load and slice buttons.
258 loadButton = wx.Button(self, -1, '&Load Model')
259 sliceButton = wx.Button(self, -1, 'P&repare print')
260 printButton = wx.Button(self, -1, '&Print')
261 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(1), loadButton)
262 self.Bind(wx.EVT_BUTTON, self.OnSlice, sliceButton)
263 self.Bind(wx.EVT_BUTTON, self.OnPrint, printButton)
265 if extruderCount > 1:
266 loadButton2 = wx.Button(self, -1, 'Load Dual')
267 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(2), loadButton2)
268 if extruderCount > 2:
269 loadButton3 = wx.Button(self, -1, 'Load Triple')
270 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(3), loadButton3)
271 if extruderCount > 3:
272 loadButton4 = wx.Button(self, -1, 'Load Quad')
273 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(4), loadButton4)
275 #Also bind double clicking the 3D preview to load an STL file.
276 self.preview3d.glCanvas.Bind(wx.EVT_LEFT_DCLICK, lambda e: self._showModelLoadDialog(1), self.preview3d.glCanvas)
278 #Main sizer, to position the preview window, buttons and tab control
279 sizer = wx.GridBagSizer()
281 sizer.Add(nb, (0,0), span=(1,1), flag=wx.EXPAND)
282 sizer.Add(self.preview3d, (0,1), span=(1,2+extruderCount), flag=wx.EXPAND)
283 sizer.AddGrowableCol(2 + extruderCount)
284 sizer.AddGrowableRow(0)
285 sizer.Add(loadButton, (1,1), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
286 if extruderCount > 1:
287 sizer.Add(loadButton2, (1,2), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
288 if extruderCount > 2:
289 sizer.Add(loadButton3, (1,3), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
290 if extruderCount > 3:
291 sizer.Add(loadButton4, (1,4), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
292 sizer.Add(sliceButton, (1,1+extruderCount), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
293 sizer.Add(printButton, (1,2+extruderCount), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
296 if len(self.filelist) > 0:
297 self.preview3d.loadModelFiles(self.filelist)
299 self.updateProfileToControls()
301 self.SetBackgroundColour(nb.GetBackgroundColour())
304 if wx.Display().GetClientArea().GetWidth() < self.GetSize().GetWidth():
305 f = self.GetSize().GetWidth() - wx.Display().GetClientArea().GetWidth()
306 self.preview3d.SetMinSize(self.preview3d.GetMinSize().DecBy(f, 0))
309 self.SetMinSize(self.GetSize())
313 def OnLoadProfile(self, e):
314 dlg=wx.FileDialog(self, "Select profile file to load", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
315 dlg.SetWildcard("ini files (*.ini)|*.ini")
316 if dlg.ShowModal() == wx.ID_OK:
317 profileFile = dlg.GetPath()
318 profile.loadGlobalProfile(profileFile)
319 self.updateProfileToControls()
322 def OnLoadProfileFromGcode(self, e):
323 dlg=wx.FileDialog(self, "Select gcode file to load profile from", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
324 dlg.SetWildcard("gcode files (*.gcode)|*.gcode;*.g")
325 if dlg.ShowModal() == wx.ID_OK:
326 gcodeFile = dlg.GetPath()
327 f = open(gcodeFile, 'r')
330 if line.startswith(';CURA_PROFILE_STRING:'):
331 profile.loadGlobalProfileFromString(line[line.find(':')+1:].strip())
334 self.updateProfileToControls()
336 wx.MessageBox('No profile found in GCode file.\nThis feature only works with GCode files made by Cura 12.07 or newer.', 'Profile load error', wx.OK | wx.ICON_INFORMATION)
339 def OnSaveProfile(self, e):
340 dlg=wx.FileDialog(self, "Select profile file to save", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
341 dlg.SetWildcard("ini files (*.ini)|*.ini")
342 if dlg.ShowModal() == wx.ID_OK:
343 profileFile = dlg.GetPath()
344 profile.saveGlobalProfile(profileFile)
347 def OnResetProfile(self, e):
348 dlg = wx.MessageDialog(self, 'This will reset all profile settings to defaults.\nUnless you have saved your current profile, all settings will be lost!\nDo you really want to reset?', 'Profile reset', wx.YES_NO | wx.ICON_QUESTION)
349 result = dlg.ShowModal() == wx.ID_YES
352 profile.resetGlobalProfile()
353 if profile.getPreference('machine_type') == 'reprap':
354 profile.putProfileSetting('nozzle_size', '0.5')
355 profile.putProfileSetting('machine_center_x', '40')
356 profile.putProfileSetting('machine_center_y', '40')
357 self.updateProfileToControls()
359 def OnBatchRun(self, e):
360 br = batchRun.batchRunWindow(self)
364 def OnPreferences(self, e):
365 prefDialog = preferencesDialog.preferencesDialog(self)
367 prefDialog.Show(True)
369 def OnSimpleSwitch(self, e):
370 profile.putPreference('startMode', 'Simple')
371 simpleMode.simpleModeWindow()
374 def OnDefaultMarlinFirmware(self, e):
375 firmwareInstall.InstallFirmware()
377 def OnCustomFirmware(self, e):
378 if profile.getPreference('machine_type') == 'ultimaker':
379 wx.MessageBox('Warning: Installing a custom firmware does not garantee that you machine will function correctly, and could damage your machine.', 'Firmware update', wx.OK | wx.ICON_EXCLAMATION)
380 dlg=wx.FileDialog(self, "Open firmware to upload", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
381 dlg.SetWildcard("HEX file (*.hex)|*.hex;*.HEX")
382 if dlg.ShowModal() == wx.ID_OK:
383 filename = dlg.GetPath()
384 if not(os.path.exists(filename)):
386 #For some reason my Ubuntu 10.10 crashes here.
387 firmwareInstall.InstallFirmware(filename)
389 def OnFirstRunWizard(self, e):
390 configWizard.configWizard()
391 self.updateProfileToControls()
393 def _showOpenDialog(self, title, wildcard = meshLoader.wildcardFilter()):
394 dlg=wx.FileDialog(self, title, os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
395 dlg.SetWildcard(wildcard)
396 if dlg.ShowModal() == wx.ID_OK:
397 filename = dlg.GetPath()
399 if not(os.path.exists(filename)):
401 profile.putPreference('lastFile', filename)
406 def _showModelLoadDialog(self, amount):
408 for i in xrange(0, amount):
409 filelist.append(self._showOpenDialog("Open file to print"))
410 if filelist[-1] == False:
412 self._loadModels(filelist)
414 def _loadModels(self, filelist):
415 self.filelist = filelist
416 self.SetTitle(filelist[-1] + ' - Cura - ' + version.getVersion())
417 profile.putPreference('lastFile', ';'.join(self.filelist))
418 self.preview3d.loadModelFiles(self.filelist, True)
419 self.preview3d.setViewMode("Normal")
421 def OnDropFiles(self, filenames):
422 self._loadModels(filenames)
424 def OnLoadModel(self, e):
425 self._showModelLoadDialog(1)
427 def OnLoadModel2(self, e):
428 self._showModelLoadDialog(2)
430 def OnLoadModel3(self, e):
431 self._showModelLoadDialog(3)
433 def OnLoadModel4(self, e):
434 self._showModelLoadDialog(4)
436 def OnSlice(self, e):
437 if len(self.filelist) < 1:
438 wx.MessageBox('You need to load a file before you can prepare it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
440 #Create a progress panel and add it to the window. The progress panel will start the Skein operation.
441 spp = sliceProgessPanel.sliceProgessPanel(self, self, self.filelist)
442 self.sizer.Add(spp, (len(self.progressPanelList)+2,0), span=(1,4), flag=wx.EXPAND)
444 newSize = self.GetSize();
445 newSize.IncBy(0, spp.GetSize().GetHeight())
446 if newSize.GetWidth() < wx.GetDisplaySize()[0]:
447 self.SetSize(newSize)
448 self.progressPanelList.append(spp)
450 def OnPrint(self, e):
451 if len(self.filelist) < 1:
452 wx.MessageBox('You need to load a file and prepare it before you can print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
454 if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
455 wx.MessageBox('You need to prepare a print before you can run the actual print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
457 printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
459 def OnExpertOpen(self, e):
460 ecw = expertConfig.expertConfigWindow()
464 def OnProjectPlanner(self, e):
465 pp = projectPlanner.projectPlanner()
469 def OnSVGSlicerOpen(self, e):
470 svgSlicer = flatSlicerWindow.flatSlicerWindow()
474 def removeSliceProgress(self, spp):
475 self.progressPanelList.remove(spp)
476 newSize = self.GetSize();
477 newSize.IncBy(0, -spp.GetSize().GetHeight())
478 if newSize.GetWidth() < wx.GetDisplaySize()[0]:
479 self.SetSize(newSize)
481 self.sizer.Detach(spp)
482 for spp in self.progressPanelList:
483 self.sizer.Detach(spp)
485 for spp in self.progressPanelList:
486 self.sizer.Add(spp, (i,0), span=(1,4), flag=wx.EXPAND)
493 def OnClose(self, e):
494 profile.saveGlobalProfile(profile.getDefaultProfilePath())
497 def updateProfileToControls(self):
498 super(mainWindow, self).updateProfileToControls()
499 self.preview3d.updateProfileToControls()
500 self.alterationPanel.updateProfileToControls()