1 from __future__ import absolute_import
4 import wx, os, platform, types, webbrowser, shutil, glob
6 from gui import configBase
7 from gui import expertConfig
8 from gui import preview3d
9 from gui import sliceProgessPanel
10 from gui import alterationPanel
11 from gui import pluginPanel
12 from gui import preferencesDialog
13 from gui import configWizard
14 from gui import firmwareInstall
15 from gui import printWindow
16 from gui import simpleMode
17 from gui import projectPlanner
18 from gui import batchRun
19 from gui import flatSlicerWindow
21 from gui import dropTarget
22 from util import validators
23 from util import profile
24 from util import version
25 from util import sliceRun
26 from util import meshLoader
30 if profile.getPreference('machine_type') == 'unknown':
31 if platform.system() == "Darwin":
32 #Check if we need to copy our examples
33 exampleFile = os.path.expanduser('~/CuraExamples/UltimakerRobot_support.stl')
34 if not os.path.isfile(exampleFile):
36 os.makedirs(os.path.dirname(exampleFile))
39 for filename in glob.glob(os.path.normpath(os.path.join(os.path.dirname(os.path.abspath(__file__)), '..', 'example', '*.*'))):
40 shutil.copy(filename, os.path.join(os.path.dirname(exampleFile), os.path.basename(filename)))
41 profile.putPreference('lastFile', exampleFile)
43 configWizard.configWizard()
44 if profile.getPreference('startMode') == 'Simple':
45 simpleMode.simpleModeWindow()
50 class mainWindow(configBase.configWindowBase):
51 "Main user interface window"
53 super(mainWindow, self).__init__(title='Cura - ' + version.getVersion())
55 extruderCount = int(profile.getPreference('extruder_amount'))
57 wx.EVT_CLOSE(self, self.OnClose)
58 #self.SetIcon(icon.getMainIcon())
60 self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.supportedExtensions()))
62 menubar = wx.MenuBar()
64 i = fileMenu.Append(-1, 'Load model file...\tCTRL+L')
65 self.Bind(wx.EVT_MENU, lambda e: self._showModelLoadDialog(1), i)
66 i = fileMenu.Append(-1, 'Prepare print...\tCTRL+R')
67 self.Bind(wx.EVT_MENU, self.OnSlice, i)
68 i = fileMenu.Append(-1, 'Print...\tCTRL+P')
69 self.Bind(wx.EVT_MENU, self.OnPrint, i)
71 fileMenu.AppendSeparator()
72 i = fileMenu.Append(-1, 'Open Profile...')
73 self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
74 i = fileMenu.Append(-1, 'Save Profile...')
75 self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
76 i = fileMenu.Append(-1, 'Load Profile from GCode...')
77 self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
78 fileMenu.AppendSeparator()
79 i = fileMenu.Append(-1, 'Reset Profile to default')
80 self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
81 fileMenu.AppendSeparator()
82 i = fileMenu.Append(-1, 'Preferences...\tCTRL+,')
83 self.Bind(wx.EVT_MENU, self.OnPreferences, i)
84 fileMenu.AppendSeparator()
85 i = fileMenu.Append(wx.ID_EXIT, 'Quit')
86 self.Bind(wx.EVT_MENU, self.OnQuit, i)
87 menubar.Append(fileMenu, '&File')
90 i = toolsMenu.Append(-1, 'Switch to Quickprint...')
91 self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
92 toolsMenu.AppendSeparator()
93 i = toolsMenu.Append(-1, 'Batch run...')
94 self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
95 i = toolsMenu.Append(-1, 'Project planner...')
96 self.Bind(wx.EVT_MENU, self.OnProjectPlanner, i)
97 # i = toolsMenu.Append(-1, 'Open SVG (2D) slicer...')
98 # self.Bind(wx.EVT_MENU, self.OnSVGSlicerOpen, i)
99 menubar.Append(toolsMenu, 'Tools')
101 expertMenu = wx.Menu()
102 i = expertMenu.Append(-1, 'Open expert settings...')
103 self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
104 expertMenu.AppendSeparator()
105 if firmwareInstall.getDefaultFirmware() != None:
106 i = expertMenu.Append(-1, 'Install default Marlin firmware')
107 self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, i)
108 i = expertMenu.Append(-1, 'Install custom firmware')
109 self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
110 expertMenu.AppendSeparator()
111 i = expertMenu.Append(-1, 'ReRun first run wizard...')
112 self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
113 menubar.Append(expertMenu, 'Expert')
116 i = helpMenu.Append(-1, 'Online documentation...')
117 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('http://daid.github.com/Cura'), i)
118 i = helpMenu.Append(-1, 'Report a problem...')
119 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
120 menubar.Append(helpMenu, 'Help')
121 self.SetMenuBar(menubar)
123 if profile.getPreference('lastFile') != '':
124 self.filelist = profile.getPreference('lastFile').split(';')
125 self.SetTitle('Cura - %s - %s' % (version.getVersion(), self.filelist[-1]))
128 self.progressPanelList = []
131 self.preview3d = preview3d.previewPanel(self)
134 nb = wx.Notebook(self)
136 (left, right) = self.CreateConfigTab(nb, 'Print config')
138 configBase.TitleRow(left, "Quality")
139 c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
140 validators.validFloat(c, 0.0001)
141 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
142 c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
143 validators.validFloat(c, 0.0001)
144 validators.wallThicknessValidator(c)
145 c = configBase.SettingRow(left, "Enable retraction", 'retraction_enable', False, 'Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab.')
147 configBase.TitleRow(left, "Fill")
148 c = configBase.SettingRow(left, "Bottom/Top thickness (mm)", 'solid_layer_thickness', '0.6', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiply of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part.')
149 validators.validFloat(c, 0.0)
150 c = configBase.SettingRow(left, "Fill Density (%)", 'fill_density', '20', 'This controls how densily filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough')
151 validators.validFloat(c, 0.0, 100.0)
153 configBase.TitleRow(left, "Skirt")
154 c = configBase.SettingRow(left, "Line count", 'skirt_line_count', '1', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects.')
155 validators.validInt(c, 0, 10)
156 c = configBase.SettingRow(left, "Start distance (mm)", 'skirt_gap', '6.0', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
157 validators.validFloat(c, 0.0)
159 configBase.TitleRow(right, "Speed && Temperature")
160 c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
161 validators.validFloat(c, 1.0)
162 validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
163 validators.printSpeedValidator(c)
165 #configBase.TitleRow(right, "Temperature")
166 c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
167 validators.validFloat(c, 0.0, 340.0)
168 validators.warningAbove(c, 260.0, "Temperatures above 260C could damage your machine, be careful!")
169 if profile.getPreference('has_heated_bed') == 'True':
170 c = configBase.SettingRow(right, "Bed temperature", 'print_bed_temperature', '0', 'Temperature used for the heated printer bed. Set at 0 to pre-heat yourself')
171 validators.validFloat(c, 0.0, 340.0)
173 configBase.TitleRow(right, "Support structure")
174 c = configBase.SettingRow(right, "Support type", 'support', ['None', 'Exterior Only', 'Everywhere'], 'Type of support structure build.\n"Exterior only" is the most commonly used support setting.\n\nNone does not do any support.\nExterior only only creates support where the support structure will touch the build platform.\nEverywhere creates support even on the insides of the model.')
175 c = configBase.SettingRow(right, "Add raft", 'enable_raft', False, 'A raft is a few layers of lines below the bottom of the object. It prevents warping. Full raft settings can be found in the expert settings.\nFor PLA this is usually not required. But if you print with ABS it is almost required.')
176 if extruderCount > 1:
177 c = configBase.SettingRow(right, "Support dual extrusion", 'support_dual_extrusion', False, 'Print the support material with the 2nd extruder in a dual extrusion setup. The primary extruder will be used for normal material, while the second extruder is used to print support material.')
179 configBase.TitleRow(right, "Filament")
180 c = configBase.SettingRow(right, "Diameter (mm)", 'filament_diameter', '2.89', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to callibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
181 validators.validFloat(c, 1.0)
182 validators.warningAbove(c, 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
183 c = configBase.SettingRow(right, "Packing Density", 'filament_density', '1.00', 'Packing density of your filament. This should be 1.00 for PLA and 0.85 for ABS')
184 validators.validFloat(c, 0.5, 1.5)
186 (left, right) = self.CreateConfigTab(nb, 'Advanced config')
188 configBase.TitleRow(left, "Machine size")
189 c = configBase.SettingRow(left, "Nozzle size (mm)", 'nozzle_size', '0.4', 'The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings.')
190 validators.validFloat(c, 0.1, 10.0)
191 c = configBase.SettingRow(left, "Machine center X (mm)", 'machine_center_x', '100', 'The center of your machine, your print will be placed at this location')
192 validators.validInt(c, 10)
193 configBase.settingNotify(c, self.preview3d.updateCenterX)
194 c = configBase.SettingRow(left, "Machine center Y (mm)", 'machine_center_y', '100', 'The center of your machine, your print will be placed at this location')
195 validators.validInt(c, 10)
196 configBase.settingNotify(c, self.preview3d.updateCenterY)
198 configBase.TitleRow(left, "Retraction")
199 c = configBase.SettingRow(left, "Minimum travel (mm)", 'retraction_min_travel', '5.0', 'Minimum amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area')
200 validators.validFloat(c, 0.0)
201 c = configBase.SettingRow(left, "Speed (mm/s)", 'retraction_speed', '40.0', 'Speed at which the filament is retracted, a higher retraction speed works better. But a very high retraction speed can lead to filament grinding.')
202 validators.validFloat(c, 0.1)
203 c = configBase.SettingRow(left, "Distance (mm)", 'retraction_amount', '0.0', 'Amount of retraction, set at 0 for no retraction at all. A value of 2.0mm seems to generate good results.')
204 validators.validFloat(c, 0.0)
205 c = configBase.SettingRow(left, "Extra length on start (mm)", 'retraction_extra', '0.0', 'Extra extrusion amount when restarting after a retraction, to better "Prime" your extruder after retraction.')
206 validators.validFloat(c, 0.0)
208 configBase.TitleRow(right, "Speed")
209 c = configBase.SettingRow(right, "Travel speed (mm/s)", 'travel_speed', '150', 'Speed at which travel moves are done, a high quality build Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then.')
210 validators.validFloat(c, 1.0)
211 validators.warningAbove(c, 300.0, "It is highly unlikely that your machine can achieve a travel speed above 300mm/s")
212 c = configBase.SettingRow(right, "Max Z speed (mm/s)", 'max_z_speed', '1.0', 'Speed at which Z moves are done. When you Z axis is properly lubercated you can increase this for less Z blob.')
213 validators.validFloat(c, 0.5)
214 c = configBase.SettingRow(right, "Bottom layer speed (mm/s)", 'bottom_layer_speed', '25', 'Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed.')
215 validators.validFloat(c, 0.0)
217 configBase.TitleRow(right, "Cool")
218 c = configBase.SettingRow(right, "Minimal layer time (sec)", 'cool_min_layer_time', '10', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend atleast this amount of seconds printing this layer.')
219 validators.validFloat(c, 0.0)
220 c = configBase.SettingRow(right, "Enable cooling fan", 'fan_enabled', True, 'Enable the cooling fan during the print. The extra cooling from the cooling fan is essensial during faster prints.')
222 configBase.TitleRow(right, "Quality")
223 c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
224 validators.validFloat(c, 0.0)
225 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
226 c = configBase.SettingRow(right, "Duplicate outlines", 'enable_skin', False, 'Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality.')
229 self.pluginPanel = pluginPanel.pluginPanel(nb)
230 if len(self.pluginPanel.pluginList) > 0:
231 nb.AddPage(self.pluginPanel, "Plugins")
233 self.pluginPanel.Show(False)
236 self.alterationPanel = alterationPanel.alterationPanel(nb)
237 nb.AddPage(self.alterationPanel, "Start/End-GCode")
239 # load and slice buttons.
240 loadButton = wx.Button(self, -1, '&Load model')
241 sliceButton = wx.Button(self, -1, 'P&repare print')
242 printButton = wx.Button(self, -1, '&Print')
243 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(1), loadButton)
244 self.Bind(wx.EVT_BUTTON, self.OnSlice, sliceButton)
245 self.Bind(wx.EVT_BUTTON, self.OnPrint, printButton)
247 if extruderCount > 1:
248 loadButton2 = wx.Button(self, -1, 'Load Dual')
249 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(2), loadButton2)
250 if extruderCount > 2:
251 loadButton3 = wx.Button(self, -1, 'Load Triple')
252 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(3), loadButton3)
253 if extruderCount > 3:
254 loadButton4 = wx.Button(self, -1, 'Load Quad')
255 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(4), loadButton4)
257 #Also bind double clicking the 3D preview to load an STL file.
258 self.preview3d.glCanvas.Bind(wx.EVT_LEFT_DCLICK, lambda e: self._showModelLoadDialog(1), self.preview3d.glCanvas)
260 #Main sizer, to position the preview window, buttons and tab control
261 sizer = wx.GridBagSizer()
263 sizer.Add(nb, (0,0), span=(1,1), flag=wx.EXPAND)
264 sizer.Add(self.preview3d, (0,1), span=(1,2+extruderCount), flag=wx.EXPAND)
265 sizer.AddGrowableCol(2 + extruderCount)
266 sizer.AddGrowableRow(0)
267 sizer.Add(loadButton, (1,1), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
268 if extruderCount > 1:
269 sizer.Add(loadButton2, (1,2), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
270 if extruderCount > 2:
271 sizer.Add(loadButton3, (1,3), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
272 if extruderCount > 3:
273 sizer.Add(loadButton4, (1,4), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
274 sizer.Add(sliceButton, (1,1+extruderCount), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
275 sizer.Add(printButton, (1,2+extruderCount), flag=wx.RIGHT|wx.BOTTOM|wx.TOP, border=5)
278 if len(self.filelist) > 0:
279 self.preview3d.loadModelFiles(self.filelist)
281 self.updateProfileToControls()
283 self.SetBackgroundColour(nb.GetBackgroundColour())
286 if wx.Display().GetClientArea().GetWidth() < self.GetSize().GetWidth():
287 f = self.GetSize().GetWidth() - wx.Display().GetClientArea().GetWidth()
288 self.preview3d.SetMinSize(self.preview3d.GetMinSize().DecBy(f, 0))
291 self.SetMinSize(self.GetSize())
295 def OnLoadProfile(self, e):
296 dlg=wx.FileDialog(self, "Select profile file to load", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
297 dlg.SetWildcard("ini files (*.ini)|*.ini")
298 if dlg.ShowModal() == wx.ID_OK:
299 profileFile = dlg.GetPath()
300 profile.loadGlobalProfile(profileFile)
301 self.updateProfileToControls()
304 def OnLoadProfileFromGcode(self, e):
305 dlg=wx.FileDialog(self, "Select gcode file to load profile from", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
306 dlg.SetWildcard("gcode files (*.gcode)|*.gcode;*.g")
307 if dlg.ShowModal() == wx.ID_OK:
308 gcodeFile = dlg.GetPath()
309 f = open(gcodeFile, 'r')
312 if line.startswith(';CURA_PROFILE_STRING:'):
313 profile.loadGlobalProfileFromString(line[line.find(':')+1:].strip())
316 self.updateProfileToControls()
318 wx.MessageBox('No profile found in GCode file.\nThis feature only works with GCode files made by Cura 12.07 or newer.', 'Profile load error', wx.OK | wx.ICON_INFORMATION)
321 def OnSaveProfile(self, e):
322 dlg=wx.FileDialog(self, "Select profile file to save", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
323 dlg.SetWildcard("ini files (*.ini)|*.ini")
324 if dlg.ShowModal() == wx.ID_OK:
325 profileFile = dlg.GetPath()
326 profile.saveGlobalProfile(profileFile)
329 def OnResetProfile(self, e):
330 dlg = wx.MessageDialog(self, 'This will reset all profile settings to defaults.\nUnless you have saved your current profile, all settings will be lost!\nDo you really want to reset?', 'Profile reset', wx.YES_NO | wx.ICON_QUESTION)
331 result = dlg.ShowModal() == wx.ID_YES
334 profile.resetGlobalProfile()
335 if profile.getPreference('machine_type') == 'reprap':
336 profile.putProfileSetting('nozzle_size', '0.5')
337 profile.putProfileSetting('machine_center_x', '40')
338 profile.putProfileSetting('machine_center_y', '40')
339 self.updateProfileToControls()
341 def OnBatchRun(self, e):
342 br = batchRun.batchRunWindow(self)
346 def OnPreferences(self, e):
347 prefDialog = preferencesDialog.preferencesDialog(self)
349 prefDialog.Show(True)
351 def OnSimpleSwitch(self, e):
352 profile.putPreference('startMode', 'Simple')
353 simpleMode.simpleModeWindow()
356 def OnDefaultMarlinFirmware(self, e):
357 firmwareInstall.InstallFirmware()
359 def OnCustomFirmware(self, e):
360 if profile.getPreference('machine_type') == 'ultimaker':
361 wx.MessageBox('Warning: Installing a custom firmware does not garantee that you machine will function correctly, and could damage your machine.', 'Firmware update', wx.OK | wx.ICON_EXCLAMATION)
362 dlg=wx.FileDialog(self, "Open firmware to upload", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
363 dlg.SetWildcard("HEX file (*.hex)|*.hex;*.HEX")
364 if dlg.ShowModal() == wx.ID_OK:
365 filename = dlg.GetPath()
366 if not(os.path.exists(filename)):
368 #For some reason my Ubuntu 10.10 crashes here.
369 firmwareInstall.InstallFirmware(filename)
371 def OnFirstRunWizard(self, e):
372 configWizard.configWizard()
373 self.updateProfileToControls()
375 def _showOpenDialog(self, title, wildcard = meshLoader.wildcardFilter()):
376 dlg=wx.FileDialog(self, title, os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
377 dlg.SetWildcard(wildcard)
378 if dlg.ShowModal() == wx.ID_OK:
379 filename = dlg.GetPath()
381 if not(os.path.exists(filename)):
383 profile.putPreference('lastFile', filename)
388 def _showModelLoadDialog(self, amount):
390 for i in xrange(0, amount):
391 filelist.append(self._showOpenDialog("Open file to print"))
392 if filelist[-1] == False:
394 self._loadModels(filelist)
396 def _loadModels(self, filelist):
397 self.filelist = filelist
398 self.SetTitle(filelist[-1] + ' - Cura - ' + version.getVersion())
399 profile.putPreference('lastFile', ';'.join(self.filelist))
400 self.preview3d.loadModelFiles(self.filelist, True)
401 self.preview3d.setViewMode("Normal")
403 def OnDropFiles(self, filenames):
404 self._loadModels(filenames)
406 def OnLoadModel(self, e):
407 self._showModelLoadDialog(1)
409 def OnLoadModel2(self, e):
410 self._showModelLoadDialog(2)
412 def OnLoadModel3(self, e):
413 self._showModelLoadDialog(3)
415 def OnLoadModel4(self, e):
416 self._showModelLoadDialog(4)
418 def OnSlice(self, e):
419 if len(self.filelist) < 1:
420 wx.MessageBox('You need to load a file before you can prepare it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
422 #Create a progress panel and add it to the window. The progress panel will start the Skein operation.
423 spp = sliceProgessPanel.sliceProgessPanel(self, self, self.filelist)
424 self.sizer.Add(spp, (len(self.progressPanelList)+2,0), span=(1,4), flag=wx.EXPAND)
426 newSize = self.GetSize();
427 newSize.IncBy(0, spp.GetSize().GetHeight())
428 if newSize.GetWidth() < wx.GetDisplaySize()[0]:
429 self.SetSize(newSize)
430 self.progressPanelList.append(spp)
432 def OnPrint(self, e):
433 if len(self.filelist) < 1:
434 wx.MessageBox('You need to load a file and prepare it before you can print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
436 if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
437 wx.MessageBox('You need to prepare a print before you can run the actual print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
439 printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
441 def OnExpertOpen(self, e):
442 ecw = expertConfig.expertConfigWindow()
446 def OnProjectPlanner(self, e):
447 pp = projectPlanner.projectPlanner()
451 def OnSVGSlicerOpen(self, e):
452 svgSlicer = flatSlicerWindow.flatSlicerWindow()
456 def removeSliceProgress(self, spp):
457 self.progressPanelList.remove(spp)
458 newSize = self.GetSize();
459 newSize.IncBy(0, -spp.GetSize().GetHeight())
460 if newSize.GetWidth() < wx.GetDisplaySize()[0]:
461 self.SetSize(newSize)
463 self.sizer.Detach(spp)
464 for spp in self.progressPanelList:
465 self.sizer.Detach(spp)
467 for spp in self.progressPanelList:
468 self.sizer.Add(spp, (i,0), span=(1,4), flag=wx.EXPAND)
475 def OnClose(self, e):
476 profile.saveGlobalProfile(profile.getDefaultProfilePath())
479 def updateProfileToControls(self):
480 super(mainWindow, self).updateProfileToControls()
481 self.preview3d.updateProfileToControls()
482 self.alterationPanel.updateProfileToControls()
483 self.pluginPanel.updateProfileToControls()