1 from __future__ import absolute_import
4 import wx, os, platform, types, webbrowser
6 from gui import configBase
7 from gui import expertConfig
8 from gui import preview3d
9 from gui import sliceProgessPanel
10 from gui import alterationPanel
11 from gui import preferencesDialog
12 from gui import configWizard
13 from gui import firmwareInstall
14 from gui import printWindow
15 from gui import simpleMode
16 from gui import projectPlanner
17 from gui import batchRun
18 from gui import flatSlicerWindow
20 from gui import dropTarget
21 from util import validators
22 from util import profile
23 from util import version
24 from util import sliceRun
25 from util import meshLoader
29 if profile.getPreference('wizardDone') == 'False':
30 configWizard.configWizard()
31 profile.putPreference("wizardDone", "True")
32 if profile.getPreference('startMode') == 'Simple':
33 simpleMode.simpleModeWindow()
38 class mainWindow(configBase.configWindowBase):
39 "Main user interface window"
41 super(mainWindow, self).__init__(title='Cura - ' + version.getVersion())
43 extruderCount = int(profile.getPreference('extruder_amount'))
45 wx.EVT_CLOSE(self, self.OnClose)
46 #self.SetIcon(icon.getMainIcon())
48 self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles, meshLoader.supportedExtensions()))
50 menubar = wx.MenuBar()
52 i = fileMenu.Append(-1, 'Load model file...')
53 self.Bind(wx.EVT_MENU, lambda e: self._showModelLoadDialog(1), i)
54 fileMenu.AppendSeparator()
55 i = fileMenu.Append(-1, 'Open Profile...')
56 self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
57 i = fileMenu.Append(-1, 'Save Profile...')
58 self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
59 i = fileMenu.Append(-1, 'Load Profile from GCode...')
60 self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
61 fileMenu.AppendSeparator()
62 i = fileMenu.Append(-1, 'Reset Profile to default')
63 self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
64 fileMenu.AppendSeparator()
65 i = fileMenu.Append(-1, 'Preferences...')
66 self.Bind(wx.EVT_MENU, self.OnPreferences, i)
67 fileMenu.AppendSeparator()
68 i = fileMenu.Append(wx.ID_EXIT, 'Quit')
69 self.Bind(wx.EVT_MENU, self.OnQuit, i)
70 menubar.Append(fileMenu, '&File')
73 i = toolsMenu.Append(-1, 'Switch to Quickprint...')
74 self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
75 toolsMenu.AppendSeparator()
76 i = toolsMenu.Append(-1, 'Batch run...')
77 self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
78 i = toolsMenu.Append(-1, 'Project planner...')
79 self.Bind(wx.EVT_MENU, self.OnProjectPlanner, i)
80 # i = toolsMenu.Append(-1, 'Open SVG (2D) slicer...')
81 # self.Bind(wx.EVT_MENU, self.OnSVGSlicerOpen, i)
82 menubar.Append(toolsMenu, 'Tools')
84 expertMenu = wx.Menu()
85 i = expertMenu.Append(-1, 'Open expert settings...')
86 self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
87 expertMenu.AppendSeparator()
88 i = expertMenu.Append(-1, 'Install default Marlin firmware')
89 self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, i)
90 i = expertMenu.Append(-1, 'Install custom firmware')
91 self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
92 expertMenu.AppendSeparator()
93 i = expertMenu.Append(-1, 'ReRun first run wizard...')
94 self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
95 menubar.Append(expertMenu, 'Expert')
98 i = helpMenu.Append(-1, 'Online documentation...')
99 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://daid.github.com/Cura'), i)
100 i = helpMenu.Append(-1, 'Report a problem...')
101 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
102 menubar.Append(helpMenu, 'Help')
103 self.SetMenuBar(menubar)
105 if profile.getPreference('lastFile') != '':
106 self.filelist = profile.getPreference('lastFile').split(';')
107 self.SetTitle(self.filelist[-1] + ' - Cura - ' + version.getVersion())
110 self.progressPanelList = []
113 self.preview3d = preview3d.previewPanel(self)
116 nb = wx.Notebook(self)
118 (left, right) = self.CreateConfigTab(nb, 'Print config')
120 configBase.TitleRow(left, "Accuracy")
121 c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
122 validators.validFloat(c, 0.0001)
123 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
124 c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
125 validators.validFloat(c, 0.0001)
126 validators.wallThicknessValidator(c)
127 c = configBase.SettingRow(left, "Enable retraction", 'retraction_enable', False, 'Retract the filament when the nozzle is moving over a none-printed area. Details about the retraction can be configured in the advanced tab.')
129 configBase.TitleRow(left, "Fill")
130 c = configBase.SettingRow(left, "Bottom/Top thickness (mm)", 'solid_layer_thickness', '0.6', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiply of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part.')
131 validators.validFloat(c, 0.0)
132 c = configBase.SettingRow(left, "Fill Density (%)", 'fill_density', '20', 'This controls how densily filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough')
133 validators.validFloat(c, 0.0, 100.0)
135 configBase.TitleRow(left, "Skirt")
136 c = configBase.SettingRow(left, "Line count", 'skirt_line_count', '1', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt. Multiple skirt lines can help priming your extruder better for small objects.')
137 validators.validInt(c, 0, 10)
138 c = configBase.SettingRow(left, "Start distance (mm)", 'skirt_gap', '6.0', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
139 validators.validFloat(c, 0.0)
141 configBase.TitleRow(right, "Speed && Temperature")
142 c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
143 validators.validFloat(c, 1.0)
144 validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
145 validators.printSpeedValidator(c)
147 #configBase.TitleRow(right, "Temperature")
148 c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
149 validators.validFloat(c, 0.0, 340.0)
150 validators.warningAbove(c, 260.0, "Temperatures above 260C could damage your machine, be careful!")
151 if profile.getPreference('has_heated_bed') == 'True':
152 c = configBase.SettingRow(right, "Bed temperature", 'print_bed_temperature', '0', 'Temperature used for the heated printer bed. Set at 0 to pre-heat yourself')
153 validators.validFloat(c, 0.0, 340.0)
155 configBase.TitleRow(right, "Support")
156 c = configBase.SettingRow(right, "Support type", 'support', ['None', 'Exterior Only', 'Everywhere', 'Empty Layers Only'], 'Type of support structure build.\n"Exterior only" is the most commonly used support setting.\n\nNone does not do any support.\nExterior only only creates support on the outside.\nEverywhere creates support even on the insides of the model.\nOnly on empty layers is for stacked objects.')
157 c = configBase.SettingRow(right, "Add raft", 'enable_raft', False, 'A raft is a few layers of lines below the bottom of the object. It prevents warping. Full raft settings can be found in the expert settings.\nFor PLA this is usually not required. But if you print with ABS it is almost required.')
158 if extruderCount > 1:
159 c = configBase.SettingRow(right, "Support dual extrusion", 'support_dual_extrusion', False, 'Print the support material with the 2nd extruder in a dual extrusion setup. The primary extruder will be used for normal material, while the second extruder is used to print support material.')
161 configBase.TitleRow(right, "Filament")
162 c = configBase.SettingRow(right, "Diameter (mm)", 'filament_diameter', '2.89', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to callibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
163 validators.validFloat(c, 1.0)
164 validators.warningAbove(c, 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
165 c = configBase.SettingRow(right, "Packing Density", 'filament_density', '1.00', 'Packing density of your filament. This should be 1.00 for PLA and 0.85 for ABS')
166 validators.validFloat(c, 0.5, 1.5)
168 (left, right) = self.CreateConfigTab(nb, 'Advanced config')
170 configBase.TitleRow(left, "Machine size")
171 c = configBase.SettingRow(left, "Nozzle size (mm)", 'nozzle_size', '0.4', 'The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings.')
172 validators.validFloat(c, 0.1, 10.0)
173 c = configBase.SettingRow(left, "Machine center X (mm)", 'machine_center_x', '100', 'The center of your machine, your print will be placed at this location')
174 validators.validInt(c, 10)
175 configBase.settingNotify(c, self.preview3d.updateCenterX)
176 c = configBase.SettingRow(left, "Machine center Y (mm)", 'machine_center_y', '100', 'The center of your machine, your print will be placed at this location')
177 validators.validInt(c, 10)
178 configBase.settingNotify(c, self.preview3d.updateCenterY)
180 configBase.TitleRow(left, "Retraction")
181 c = configBase.SettingRow(left, "Minimal travel (mm)", 'retraction_min_travel', '5.0', 'Minimal amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area')
182 validators.validFloat(c, 0.0)
183 c = configBase.SettingRow(left, "Speed (mm/s)", 'retraction_speed', '40.0', 'Speed at which the filament is retracted, a higher retraction speed works better. But a very high retraction speed can lead to filament grinding.')
184 validators.validFloat(c, 0.1)
185 c = configBase.SettingRow(left, "Distance (mm)", 'retraction_amount', '0.0', 'Amount of retraction, set at 0 for no retraction at all. A value of 2.0mm seems to generate good results.')
186 validators.validFloat(c, 0.0)
187 c = configBase.SettingRow(left, "Extra length on start (mm)", 'retraction_extra', '0.0', 'Extra extrusion amount when restarting after a retraction, to better "Prime" your extruder after retraction.')
188 validators.validFloat(c, 0.0)
190 configBase.TitleRow(right, "Speed")
191 c = configBase.SettingRow(right, "Travel speed (mm/s)", 'travel_speed', '150', 'Speed at which travel moves are done, a high quality build Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then.')
192 validators.validFloat(c, 1.0)
193 validators.warningAbove(c, 300.0, "It is highly unlikely that your machine can achieve a travel speed above 300mm/s")
194 c = configBase.SettingRow(right, "Max Z speed (mm/s)", 'max_z_speed', '1.0', 'Speed at which Z moves are done. When you Z axis is properly lubercated you can increase this for less Z blob.')
195 validators.validFloat(c, 0.5)
196 c = configBase.SettingRow(right, "Bottom layer speed (mm/s)", 'bottom_layer_speed', '25', 'Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed.')
197 validators.validFloat(c, 0.0)
199 configBase.TitleRow(right, "Cool")
200 c = configBase.SettingRow(right, "Minimal layer time (sec)", 'cool_min_layer_time', '10', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend atleast this amount of seconds printing this layer.')
201 validators.validFloat(c, 0.0)
202 c = configBase.SettingRow(right, "Enable cooling fan", 'fan_enabled', True, 'Enable the cooling fan during the print. The extra cooling from the cooling fan is essensial during faster prints.')
204 configBase.TitleRow(right, "Accuracy")
205 c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
206 validators.validFloat(c, 0.0)
207 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
208 c = configBase.SettingRow(right, "Enable 'skin'", 'enable_skin', False, 'Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality.')
210 self.alterationPanel = alterationPanel.alterationPanel(nb)
211 nb.AddPage(self.alterationPanel, "Start/End-GCode")
213 # load and slice buttons.
214 loadButton = wx.Button(self, -1, 'Load Model')
215 sliceButton = wx.Button(self, -1, 'Prepare print')
216 printButton = wx.Button(self, -1, 'Print')
217 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(1), loadButton)
218 self.Bind(wx.EVT_BUTTON, self.OnSlice, sliceButton)
219 self.Bind(wx.EVT_BUTTON, self.OnPrint, printButton)
221 if extruderCount > 1:
222 loadButton2 = wx.Button(self, -1, 'Load Dual')
223 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(2), loadButton2)
224 if extruderCount > 2:
225 loadButton3 = wx.Button(self, -1, 'Load Triple')
226 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(3), loadButton3)
227 if extruderCount > 3:
228 loadButton4 = wx.Button(self, -1, 'Load Quad')
229 self.Bind(wx.EVT_BUTTON, lambda e: self._showModelLoadDialog(4), loadButton4)
231 #Also bind double clicking the 3D preview to load an STL file.
232 self.preview3d.glCanvas.Bind(wx.EVT_LEFT_DCLICK, lambda e: self._showModelLoadDialog(1), self.preview3d.glCanvas)
234 #Main sizer, to position the preview window, buttons and tab control
235 sizer = wx.GridBagSizer()
237 sizer.Add(nb, (0,0), span=(1,1), flag=wx.EXPAND)
238 sizer.Add(self.preview3d, (0,1), span=(1,2+extruderCount), flag=wx.EXPAND)
239 sizer.AddGrowableCol(2 + extruderCount)
240 sizer.AddGrowableRow(0)
241 sizer.Add(loadButton, (1,1), flag=wx.RIGHT, border=5)
242 if extruderCount > 1:
243 sizer.Add(loadButton2, (1,2), flag=wx.RIGHT, border=5)
244 if extruderCount > 2:
245 sizer.Add(loadButton3, (1,3), flag=wx.RIGHT, border=5)
246 if extruderCount > 3:
247 sizer.Add(loadButton4, (1,4), flag=wx.RIGHT, border=5)
248 sizer.Add(sliceButton, (1,1+extruderCount), flag=wx.RIGHT, border=5)
249 sizer.Add(printButton, (1,2+extruderCount), flag=wx.RIGHT, border=5)
252 if len(self.filelist) > 0:
253 self.preview3d.loadModelFiles(self.filelist)
255 self.updateProfileToControls()
258 if wx.Display().GetClientArea().GetWidth() < self.GetSize().GetWidth():
259 f = self.GetSize().GetWidth() - wx.Display().GetClientArea().GetWidth()
260 self.preview3d.SetMinSize(self.preview3d.GetMinSize().DecBy(f, 0))
262 self.SetMinSize(self.GetSize())
266 def OnLoadProfile(self, e):
267 dlg=wx.FileDialog(self, "Select profile file to load", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
268 dlg.SetWildcard("ini files (*.ini)|*.ini")
269 if dlg.ShowModal() == wx.ID_OK:
270 profileFile = dlg.GetPath()
271 profile.loadGlobalProfile(profileFile)
272 self.updateProfileToControls()
275 def OnLoadProfileFromGcode(self, e):
276 dlg=wx.FileDialog(self, "Select gcode file to load profile from", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
277 dlg.SetWildcard("gcode files (*.gcode)|*.gcode;*.g")
278 if dlg.ShowModal() == wx.ID_OK:
279 gcodeFile = dlg.GetPath()
280 f = open(gcodeFile, 'r')
283 if line.startswith(';CURA_PROFILE_STRING:'):
284 profile.loadGlobalProfileFromString(line[line.find(':')+1:].strip())
287 self.updateProfileToControls()
289 wx.MessageBox('No profile found in GCode file.\nThis feature only works with GCode files made by Cura 12.07 or newer.', 'Profile load error', wx.OK | wx.ICON_INFORMATION)
292 def OnSaveProfile(self, e):
293 dlg=wx.FileDialog(self, "Select profile file to save", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
294 dlg.SetWildcard("ini files (*.ini)|*.ini")
295 if dlg.ShowModal() == wx.ID_OK:
296 profileFile = dlg.GetPath()
297 profile.saveGlobalProfile(profileFile)
300 def OnResetProfile(self, e):
301 dlg = wx.MessageDialog(self, 'This will reset all profile settings to defaults.\nUnless you have saved your current profile, all settings will be lost!\nDo you really want to reset?', 'Profile reset', wx.YES_NO | wx.ICON_QUESTION)
302 result = dlg.ShowModal() == wx.ID_YES
305 profile.resetGlobalProfile()
306 if profile.getPreference('machine_type') == 'reprap':
307 profile.putProfileSetting('nozzle_size', '0.5')
308 profile.putProfileSetting('machine_center_x', '40')
309 profile.putProfileSetting('machine_center_y', '40')
310 self.updateProfileToControls()
312 def OnBatchRun(self, e):
313 br = batchRun.batchRunWindow(self)
317 def OnPreferences(self, e):
318 prefDialog = preferencesDialog.preferencesDialog(self)
320 prefDialog.Show(True)
322 def OnSimpleSwitch(self, e):
323 profile.putPreference('startMode', 'Simple')
324 simpleMode.simpleModeWindow()
327 def OnDefaultMarlinFirmware(self, e):
328 firmwareInstall.InstallFirmware()
330 def OnCustomFirmware(self, e):
331 dlg=wx.FileDialog(self, "Open firmware to upload", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
332 dlg.SetWildcard("HEX file (*.hex)|*.hex;*.HEX")
333 if dlg.ShowModal() == wx.ID_OK:
334 filename = dlg.GetPath()
335 if not(os.path.exists(filename)):
337 #For some reason my Ubuntu 10.10 crashes here.
338 firmwareInstall.InstallFirmware(filename)
340 def OnFirstRunWizard(self, e):
341 configWizard.configWizard()
342 self.updateProfileToControls()
344 def _showOpenDialog(self, title, wildcard = meshLoader.wildcardFilter()):
345 dlg=wx.FileDialog(self, title, os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
346 dlg.SetWildcard(wildcard)
347 if dlg.ShowModal() == wx.ID_OK:
348 filename = dlg.GetPath()
350 if not(os.path.exists(filename)):
352 profile.putPreference('lastFile', filename)
357 def _showModelLoadDialog(self, amount):
359 for i in xrange(0, amount):
360 filelist.append(self._showOpenDialog("Open file to print"))
361 if filelist[-1] == False:
363 self._loadModels(filelist)
365 def _loadModels(self, filelist):
366 self.filelist = filelist
367 self.SetTitle(filelist[-1] + ' - Cura - ' + version.getVersion())
368 profile.putPreference('lastFile', ';'.join(self.filelist))
369 self.preview3d.loadModelFiles(self.filelist, True)
370 self.preview3d.setViewMode("Normal")
372 def OnDropFiles(self, filenames):
373 self._loadModels(filenames)
375 def OnLoadModel(self, e):
376 self._showModelLoadDialog(1)
378 def OnLoadModel2(self, e):
379 self._showModelLoadDialog(2)
381 def OnLoadModel3(self, e):
382 self._showModelLoadDialog(3)
384 def OnLoadModel4(self, e):
385 self._showModelLoadDialog(4)
387 def OnSlice(self, e):
388 if len(self.filelist) < 1:
389 wx.MessageBox('You need to load a file before you can slice it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
391 #Create a progress panel and add it to the window. The progress panel will start the Skein operation.
392 spp = sliceProgessPanel.sliceProgessPanel(self, self, self.filelist)
393 self.sizer.Add(spp, (len(self.progressPanelList)+2,0), span=(1,4), flag=wx.EXPAND)
395 newSize = self.GetSize();
396 newSize.IncBy(0, spp.GetSize().GetHeight())
397 self.SetSize(newSize)
398 self.progressPanelList.append(spp)
400 def OnPrint(self, e):
401 if len(self.filelist) < 1:
402 wx.MessageBox('You need to load a file and prepare it before you can print it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
404 if not os.path.exists(sliceRun.getExportFilename(self.filelist[0])):
405 wx.MessageBox('You need to prepare a print before you can run the actual print.', 'Print error', wx.OK | wx.ICON_INFORMATION)
407 printWindow.printFile(sliceRun.getExportFilename(self.filelist[0]))
409 def OnExpertOpen(self, e):
410 ecw = expertConfig.expertConfigWindow()
414 def OnProjectPlanner(self, e):
415 pp = projectPlanner.projectPlanner()
419 def OnSVGSlicerOpen(self, e):
420 svgSlicer = flatSlicerWindow.flatSlicerWindow()
424 def removeSliceProgress(self, spp):
425 self.progressPanelList.remove(spp)
426 newSize = self.GetSize();
427 newSize.IncBy(0, -spp.GetSize().GetHeight())
428 self.SetSize(newSize)
430 self.sizer.Detach(spp)
431 for spp in self.progressPanelList:
432 self.sizer.Detach(spp)
434 for spp in self.progressPanelList:
435 self.sizer.Add(spp, (i,0), span=(1,4), flag=wx.EXPAND)
442 def OnClose(self, e):
443 profile.saveGlobalProfile(profile.getDefaultProfilePath())
446 def updateProfileToControls(self):
447 super(mainWindow, self).updateProfileToControls()
448 self.preview3d.updateProfileToControls()
449 self.alterationPanel.updateProfileToControls()