1 from __future__ import absolute_import
4 import wx, os, platform, types, webbrowser
6 from gui import configBase
7 from gui import expertConfig
8 from gui import preview3d
9 from gui import sliceProgessPanel
10 from gui import alterationPanel
11 from gui import validators
12 from gui import preferencesDialog
13 from gui import configWizard
14 from gui import machineCom
15 from gui import printWindow
16 from gui import simpleMode
18 from util import profile
22 if profile.getPreference('wizardDone') == 'False':
23 if os.name == 'darwin':
24 wx.MessageBox('The MacOS version of Cura is experimental.\nThere are still UI/usability bugs. Check the issue list at:\nhttps://github.com/daid/Cura/issues\nfor details.\nPlease report any extra issue you find.', 'MacOS Warning', wx.OK | wx.ICON_INFORMATION)
25 configWizard.configWizard()
26 profile.putPreference("wizardDone", "True")
27 if profile.getPreference('startMode') == 'Simple':
28 simpleMode.simpleModeWindow()
33 class mainWindow(configBase.configWindowBase):
34 "Main user interface window"
36 super(mainWindow, self).__init__(title='Cura')
38 wx.EVT_CLOSE(self, self.OnClose)
39 #self.SetIcon(icon.getMainIcon())
41 menubar = wx.MenuBar()
43 i = fileMenu.Append(-1, 'Load model file...')
44 self.Bind(wx.EVT_MENU, self.OnLoadModel, i)
45 fileMenu.AppendSeparator()
46 i = fileMenu.Append(-1, 'Open Profile...')
47 self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
48 i = fileMenu.Append(-1, 'Save Profile...')
49 self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
50 fileMenu.AppendSeparator()
51 i = fileMenu.Append(-1, 'Preferences...')
52 self.Bind(wx.EVT_MENU, self.OnPreferences, i)
53 fileMenu.AppendSeparator()
54 i = fileMenu.Append(wx.ID_EXIT, 'Quit')
55 self.Bind(wx.EVT_MENU, self.OnQuit, i)
56 menubar.Append(fileMenu, '&File')
58 simpleMenu = wx.Menu()
59 i = simpleMenu.Append(-1, 'Switch to simple mode...')
60 self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
61 menubar.Append(simpleMenu, 'Simple')
63 expertMenu = wx.Menu()
64 i = expertMenu.Append(-1, 'Open expert settings...')
65 self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
66 expertMenu.AppendSeparator()
67 i = expertMenu.Append(-1, 'Install default Marlin firmware')
68 self.Bind(wx.EVT_MENU, self.OnDefaultMarlinFirmware, i)
69 i = expertMenu.Append(-1, 'Install custom firmware')
70 self.Bind(wx.EVT_MENU, self.OnCustomFirmware, i)
71 expertMenu.AppendSeparator()
72 i = expertMenu.Append(-1, 'ReRun first run wizard...')
73 self.Bind(wx.EVT_MENU, self.OnFirstRunWizard, i)
74 menubar.Append(expertMenu, 'Expert')
77 i = helpMenu.Append(-1, 'Online documentation...')
78 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/wiki'), i)
79 i = helpMenu.Append(-1, 'Report a problem...')
80 self.Bind(wx.EVT_MENU, lambda e: webbrowser.open('https://github.com/daid/Cura/issues'), i)
81 menubar.Append(helpMenu, 'Help')
82 self.SetMenuBar(menubar)
85 self.filename = profile.getPreference('lastFile')
86 self.progressPanelList = []
89 self.preview3d = preview3d.previewPanel(self)
92 nb = wx.Notebook(self)
94 (left, right) = self.CreateConfigTab(nb, 'Print config')
96 configBase.TitleRow(left, "Accuracy")
97 c = configBase.SettingRow(left, "Layer height (mm)", 'layer_height', '0.2', 'Layer height in millimeters.\n0.2 is a good value for quick prints.\n0.1 gives high quality prints.')
98 validators.validFloat(c, 0.0)
99 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 80.0 / 100.0), "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and are not recommended.")
100 c = configBase.SettingRow(left, "Wall thickness (mm)", 'wall_thickness', '0.8', 'Thickness of the walls.\nThis is used in combination with the nozzle size to define the number\nof perimeter lines and the thickness of those perimeter lines.')
101 validators.validFloat(c, 0.0)
102 validators.wallThicknessValidator(c)
104 configBase.TitleRow(left, "Fill")
105 c = configBase.SettingRow(left, "Bottom/Top thickness (mm)", 'solid_layer_thickness', '0.6', 'This controls the thickness of the bottom and top layers, the amount of solid layers put down is calculated by the layer thickness and this value.\nHaving this value a multiply of the layer thickness makes sense. And keep it near your wall thickness to make an evenly strong part.')
106 validators.validFloat(c, 0.0)
107 c = configBase.SettingRow(left, "Fill Density (%)", 'fill_density', '20', 'This controls how densily filled the insides of your print will be. For a solid part use 100%, for an empty part use 0%. A value around 20% is usually enough')
108 validators.validFloat(c, 0.0, 100.0)
110 configBase.TitleRow(left, "Skirt")
111 c = configBase.SettingRow(left, "Line count", 'skirt_line_count', '1', 'The skirt is a line drawn around the object at the first layer. This helps to prime your extruder, and to see if the object fits on your platform.\nSetting this to 0 will disable the skirt.')
112 validators.validInt(c, 0, 10)
113 c = configBase.SettingRow(left, "Start distance (mm)", 'skirt_gap', '6.0', 'The distance between the skirt and the first layer.\nThis is the minimal distance, multiple skirt lines will be put outwards from this distance.')
114 validators.validFloat(c, 0.0)
116 configBase.TitleRow(right, "Speed")
117 c = configBase.SettingRow(right, "Print speed (mm/s)", 'print_speed', '50', 'Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/s, but for good quality prints you want to print slower. Printing speed depends on a lot of factors. So you will be experimenting with optimal settings for this.')
118 validators.validFloat(c, 1.0)
119 validators.warningAbove(c, 150.0, "It is highly unlikely that your machine can achieve a printing speed above 150mm/s")
120 validators.printSpeedValidator(c)
122 configBase.TitleRow(right, "Temperature")
123 c = configBase.SettingRow(right, "Printing temperature", 'print_temperature', '0', 'Temperature used for printing. Set at 0 to pre-heat yourself')
124 validators.validFloat(c, 0.0, 340.0)
125 validators.warningAbove(c, 260.0, "Temperatures above 260C could damage your machine, be careful!")
127 configBase.TitleRow(right, "Support")
128 c = configBase.SettingRow(right, "Support type", 'support', ['None', 'Exterior Only', 'Everywhere', 'Empty Layers Only'], 'Type of support structure build.\nNone does not do any support.\nExterior only only creates support on the outside.\nEverywhere creates support even on the insides of the model.\nOnly on empty layers is for stacked objects.')
129 c = configBase.SettingRow(right, "Add raft", 'enable_raft', False, 'A raft is a few layers of lines below the bottom of the object. It prevents warping. Full raft settings can be found in the expert settings.\nFor PLA this is usually not required. But if you print with ABS it is almost required.')
131 configBase.TitleRow(right, "Filament")
132 c = configBase.SettingRow(right, "Diameter (mm)", 'filament_diameter', '2.89', 'Diameter of your filament, as accurately as possible.\nIf you cannot measure this value you will have to callibrate it, a higher number means less extrusion, a smaller number generates more extrusion.')
133 validators.validFloat(c, 1.0)
134 validators.warningAbove(c, 3.5, "Are you sure your filament is that thick? Normal filament is around 3mm or 1.75mm.")
135 c = configBase.SettingRow(right, "Packing Density", 'filament_density', '1.00', 'Packing density of your filament. This should be 1.00 for PLA and 0.85 for ABS')
136 validators.validFloat(c, 0.5, 1.5)
138 (left, right) = self.CreateConfigTab(nb, 'Advanced config')
140 configBase.TitleRow(left, "Machine size")
141 c = configBase.SettingRow(left, "Nozzle size (mm)", 'nozzle_size', '0.4', 'The nozzle size is very important, this is used to calculate the line width of the infill, and used to calculate the amount of outside wall lines and thickness for the wall thickness you entered in the print settings.')
142 validators.validFloat(c, 0.1, 1.0)
143 c = configBase.SettingRow(left, "Machine center X (mm)", 'machine_center_x', '100', 'The center of your machine, your print will be placed at this location')
144 validators.validInt(c, 10)
145 configBase.settingNotify(c, self.preview3d.updateCenterX)
146 c = configBase.SettingRow(left, "Machine center Y (mm)", 'machine_center_y', '100', 'The center of your machine, your print will be placed at this location')
147 validators.validInt(c, 10)
148 configBase.settingNotify(c, self.preview3d.updateCenterY)
150 configBase.TitleRow(left, "Retraction")
151 c = configBase.SettingRow(left, "Minimal travel (mm)", 'retraction_min_travel', '5.0', 'Minimal amount of travel needed for a retraction to happen at all. To make sure you do not get a lot of retractions in a small area')
152 validators.validFloat(c, 0.0)
153 c = configBase.SettingRow(left, "Speed (mm/s)", 'retraction_speed', '13.5', 'Speed at which the filament is retracted')
154 validators.validFloat(c, 0.1)
155 c = configBase.SettingRow(left, "Distance (mm)", 'retraction_amount', '0.0', 'Amount of retraction, set at 0 for no retraction at all.')
156 validators.validFloat(c, 0.0)
157 c = configBase.SettingRow(left, "Extra length on start (mm)", 'retraction_extra', '0.0', 'Extra extrusion amount when restarting after a retraction, to better "Prime" your extruder')
158 validators.validFloat(c, 0.0)
160 configBase.TitleRow(right, "Speed")
161 c = configBase.SettingRow(right, "Travel speed (mm/s)", 'travel_speed', '150', 'Speed at which travel moves are done')
162 validators.validFloat(c, 1.0)
163 validators.warningAbove(c, 300.0, "It is highly unlikely that your machine can achieve a travel speed above 150mm/s")
164 c = configBase.SettingRow(right, "Max Z speed (mm/s)", 'max_z_speed', '1.0', 'Speed at which Z moves are done.')
165 validators.validFloat(c, 0.5)
166 c = configBase.SettingRow(right, "Bottom layer speed (mm/s)", 'bottom_layer_speed', '25', 'Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed.')
167 validators.validFloat(c, 0.0)
169 configBase.TitleRow(right, "Cool")
170 c = configBase.SettingRow(right, "Minimal layer time (sec)", 'cool_min_layer_time', '10', 'Minimum time spend in a layer, gives the layer time to cool down before the next layer is put on top. If the layer will be placed down too fast the printer will slow down to make sure it has spend atleast this amount of seconds printing this layer.')
171 validators.validFloat(c, 0.0)
172 c = configBase.SettingRow(right, "Enable cooling fan", 'fan_enabled', True, 'Enable the cooling fan during the print. The extra cooling from the cooling fan is essensial during faster prints.')
174 configBase.TitleRow(right, "Accuracy")
175 c = configBase.SettingRow(right, "Initial layer thickness (mm)", 'bottom_thickness', '0.0', 'Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers.')
176 validators.validFloat(c, 0.0)
177 validators.warningAbove(c, lambda : (float(profile.getProfileSetting('nozzle_size')) * 3.0 / 4.0), "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad results and is not recommended.")
179 nb.AddPage(alterationPanel.alterationPanel(nb), "Start/End-GCode")
181 # load and slice buttons.
182 loadButton = wx.Button(self, -1, 'Load Model')
183 sliceButton = wx.Button(self, -1, 'Slice to GCode')
184 printButton = wx.Button(self, -1, 'Print GCode')
185 self.Bind(wx.EVT_BUTTON, self.OnLoadModel, loadButton)
186 self.Bind(wx.EVT_BUTTON, self.OnSlice, sliceButton)
187 self.Bind(wx.EVT_BUTTON, self.OnPrint, printButton)
188 #Also bind double clicking the 3D preview to load an STL file.
189 self.preview3d.glCanvas.Bind(wx.EVT_LEFT_DCLICK, self.OnLoadModel, self.preview3d.glCanvas)
191 #Main sizer, to position the preview window, buttons and tab control
192 sizer = wx.GridBagSizer()
194 sizer.Add(nb, (0,0), span=(1,1), flag=wx.EXPAND)
195 sizer.Add(self.preview3d, (0,1), span=(1,3), flag=wx.EXPAND)
196 sizer.AddGrowableCol(2)
197 sizer.AddGrowableRow(0)
198 sizer.Add(loadButton, (1,1), flag=wx.RIGHT, border=5)
199 sizer.Add(sliceButton, (1,2), flag=wx.RIGHT, border=5)
200 sizer.Add(printButton, (1,3), flag=wx.RIGHT, border=5)
203 if self.filename != "None":
204 self.preview3d.loadModelFile(self.filename)
205 self.lastPath = os.path.split(self.filename)[0]
207 self.updateProfileToControls()
210 self.SetMinSize(self.GetSize())
214 def OnLoadProfile(self, e):
215 dlg=wx.FileDialog(self, "Select profile file to load", self.lastPath, style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
216 dlg.SetWildcard("ini files (*.ini)|*.ini")
217 if dlg.ShowModal() == wx.ID_OK:
218 profileFile = dlg.GetPath()
219 self.lastPath = os.path.split(profileFile)[0]
220 profile.loadGlobalProfile(profileFile)
221 self.updateProfileToControls()
224 def OnSaveProfile(self, e):
225 dlg=wx.FileDialog(self, "Select profile file to save", self.lastPath, style=wx.FD_SAVE)
226 dlg.SetWildcard("ini files (*.ini)|*.ini")
227 if dlg.ShowModal() == wx.ID_OK:
228 profileFile = dlg.GetPath()
229 self.lastPath = os.path.split(profileFile)[0]
230 profile.saveGlobalProfile(profileFile)
233 def OnPreferences(self, e):
234 prefDialog = preferencesDialog.preferencesDialog(self)
236 prefDialog.Show(True)
238 def OnSimpleSwitch(self, e):
239 profile.putPreference('startMode', 'Simple')
240 simpleMode.simpleModeWindow()
243 def OnDefaultMarlinFirmware(self, e):
244 machineCom.InstallFirmware(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../firmware/default.hex"))
246 def OnCustomFirmware(self, e):
247 dlg=wx.FileDialog(self, "Open firmware to upload", self.lastPath, style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
248 dlg.SetWildcard("HEX file (*.hex)|*.hex;*.HEX")
249 if dlg.ShowModal() == wx.ID_OK:
250 filename = dlg.GetPath()
251 if not(os.path.exists(filename)):
253 #For some reason my Ubuntu 10.10 crashes here.
254 machineCom.InstallFirmware(filename)
256 def OnFirstRunWizard(self, e):
257 configWizard.configWizard()
258 self.updateProfileToControls()
260 def OnLoadModel(self, e):
261 dlg=wx.FileDialog(self, "Open file to print", self.lastPath, style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST)
262 dlg.SetWildcard("STL files (*.stl)|*.stl;*.STL")
263 if dlg.ShowModal() == wx.ID_OK:
264 self.filename=dlg.GetPath()
265 profile.putPreference('lastFile', self.filename)
266 if not(os.path.exists(self.filename)):
268 self.lastPath = os.path.split(self.filename)[0]
269 self.preview3d.loadModelFile(self.filename)
270 self.preview3d.setViewMode("Model - Normal")
273 def OnSlice(self, e):
274 if self.filename == None:
276 #Create a progress panel and add it to the window. The progress panel will start the Skein operation.
277 spp = sliceProgessPanel.sliceProgessPanel(self, self, self.filename)
278 self.sizer.Add(spp, (len(self.progressPanelList)+2,0), span=(1,4), flag=wx.EXPAND)
280 newSize = self.GetSize();
281 newSize.IncBy(0, spp.GetSize().GetHeight())
282 self.SetSize(newSize)
283 self.progressPanelList.append(spp)
285 def OnPrint(self, e):
286 if self.filename == None:
287 wx.MessageBox('You need to load a file before you can print it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
289 if not os.path.exists(self.filename[: self.filename.rfind('.')] + "_export.gcode"):
290 wx.MessageBox('You need to slice the file to GCode before you can print it.', 'Print error', wx.OK | wx.ICON_INFORMATION)
292 printWindow.printFile(self.filename[: self.filename.rfind('.')] + "_export.gcode")
294 def OnExpertOpen(self, e):
295 ecw = expertConfig.expertConfigWindow()
299 def removeSliceProgress(self, spp):
300 self.progressPanelList.remove(spp)
301 newSize = self.GetSize();
302 newSize.IncBy(0, -spp.GetSize().GetHeight())
303 self.SetSize(newSize)
304 self.sizer.Remove(spp)
306 for spp in self.progressPanelList:
307 self.sizer.Remove(spp)
309 for spp in self.progressPanelList:
310 self.sizer.Add(spp, (i,0), span=(1,4), flag=wx.EXPAND)
317 def OnClose(self, e):
318 profile.saveGlobalProfile(profile.getDefaultProfilePath())