1 __copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
12 from Cura.gui import firmwareInstall
13 from Cura.gui import printWindow
14 from Cura.util import machineCom
15 from Cura.util import profile
16 from Cura.util import gcodeGenerator
17 from Cura.util import resources
20 class InfoBox(wx.Panel):
21 def __init__(self, parent):
22 super(InfoBox, self).__init__(parent)
23 self.SetBackgroundColour('#FFFF80')
25 self.sizer = wx.GridBagSizer(5, 5)
26 self.SetSizer(self.sizer)
28 self.attentionBitmap = wx.Bitmap(resources.getPathForImage('attention.png'))
29 self.errorBitmap = wx.Bitmap(resources.getPathForImage('error.png'))
30 self.readyBitmap = wx.Bitmap(resources.getPathForImage('ready.png'))
32 wx.Bitmap(resources.getPathForImage('busy-0.png')),
33 wx.Bitmap(resources.getPathForImage('busy-1.png')),
34 wx.Bitmap(resources.getPathForImage('busy-2.png')),
35 wx.Bitmap(resources.getPathForImage('busy-3.png'))
38 self.bitmap = wx.StaticBitmap(self, -1, wx.EmptyBitmapRGBA(24, 24, red=255, green=255, blue=255, alpha=1))
39 self.text = wx.StaticText(self, -1, '')
40 self.extraInfoButton = wx.Button(self, -1, 'i', style=wx.BU_EXACTFIT)
41 self.sizer.Add(self.bitmap, pos=(0, 0), flag=wx.ALL, border=5)
42 self.sizer.Add(self.text, pos=(0, 1), flag=wx.TOP | wx.BOTTOM | wx.ALIGN_CENTER_VERTICAL, border=5)
43 self.sizer.Add(self.extraInfoButton, pos=(0,2), flag=wx.ALL|wx.ALIGN_RIGHT|wx.ALIGN_CENTER_VERTICAL, border=5)
44 self.sizer.AddGrowableCol(1)
46 self.extraInfoButton.Show(False)
48 self.extraInfoUrl = ''
50 self.timer = wx.Timer(self)
51 self.Bind(wx.EVT_TIMER, self.doBusyUpdate, self.timer)
52 self.Bind(wx.EVT_BUTTON, self.doExtraInfo, self.extraInfoButton)
55 def SetInfo(self, info):
56 self.SetBackgroundColour('#FFFF80')
57 self.text.SetLabel(info)
58 self.extraInfoButton.Show(False)
61 def SetError(self, info, extraInfoUrl):
62 self.extraInfoUrl = extraInfoUrl
63 self.SetBackgroundColour('#FF8080')
64 self.text.SetLabel(info)
65 self.extraInfoButton.Show(True)
67 self.SetErrorIndicator()
70 def SetAttention(self, info):
71 self.SetBackgroundColour('#FFFF80')
72 self.text.SetLabel(info)
73 self.extraInfoButton.Show(False)
74 self.SetAttentionIndicator()
78 def SetBusy(self, info):
80 self.SetBusyIndicator()
82 def SetBusyIndicator(self):
84 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
86 def doExtraInfo(self, e):
87 webbrowser.open(self.extraInfoUrl)
89 def doBusyUpdate(self, e):
90 if self.busyState is None:
93 if self.busyState >= len(self.busyBitmap):
95 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
97 def SetReadyIndicator(self):
99 self.bitmap.SetBitmap(self.readyBitmap)
101 def SetErrorIndicator(self):
102 self.busyState = None
103 self.bitmap.SetBitmap(self.errorBitmap)
105 def SetAttentionIndicator(self):
106 self.busyState = None
107 self.bitmap.SetBitmap(self.attentionBitmap)
110 class InfoPage(wx.wizard.WizardPageSimple):
111 def __init__(self, parent, title):
112 wx.wizard.WizardPageSimple.__init__(self, parent)
114 sizer = wx.GridBagSizer(5, 5)
118 title = wx.StaticText(self, -1, title)
119 title.SetFont(wx.Font(18, wx.SWISS, wx.NORMAL, wx.BOLD))
120 sizer.Add(title, pos=(0, 0), span=(1, 2), flag=wx.ALIGN_CENTRE | wx.ALL)
121 sizer.Add(wx.StaticLine(self, -1), pos=(1, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
122 sizer.AddGrowableCol(1)
126 def AddText(self, info):
127 text = wx.StaticText(self, -1, info)
128 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
132 def AddSeperator(self):
133 self.GetSizer().Add(wx.StaticLine(self, -1), pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
136 def AddHiddenSeperator(self):
139 def AddInfoBox(self):
140 infoBox = InfoBox(self)
141 self.GetSizer().Add(infoBox, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
145 def AddRadioButton(self, label, style=0):
146 radio = wx.RadioButton(self, -1, label, style=style)
147 self.GetSizer().Add(radio, pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
151 def AddCheckbox(self, label, checked=False):
152 check = wx.CheckBox(self, -1)
153 text = wx.StaticText(self, -1, label)
154 check.SetValue(checked)
155 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
156 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 2), flag=wx.ALL)
160 def AddButton(self, label):
161 button = wx.Button(self, -1, label)
162 self.GetSizer().Add(button, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
166 def AddDualButton(self, label1, label2):
167 button1 = wx.Button(self, -1, label1)
168 self.GetSizer().Add(button1, pos=(self.rowNr, 0), flag=wx.RIGHT)
169 button2 = wx.Button(self, -1, label2)
170 self.GetSizer().Add(button2, pos=(self.rowNr, 1))
172 return button1, button2
174 def AddTextCtrl(self, value):
175 ret = wx.TextCtrl(self, -1, value)
176 self.GetSizer().Add(ret, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
180 def AddLabelTextCtrl(self, info, value):
181 text = wx.StaticText(self, -1, info)
182 ret = wx.TextCtrl(self, -1, value)
183 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
184 self.GetSizer().Add(ret, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
188 def AddTextCtrlButton(self, value, buttonText):
189 text = wx.TextCtrl(self, -1, value)
190 button = wx.Button(self, -1, buttonText)
191 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
192 self.GetSizer().Add(button, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
196 def AddBitmap(self, bitmap):
197 bitmap = wx.StaticBitmap(self, -1, bitmap)
198 self.GetSizer().Add(bitmap, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
202 def AddCheckmark(self, label, bitmap):
203 check = wx.StaticBitmap(self, -1, bitmap)
204 text = wx.StaticText(self, -1, label)
205 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
206 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 1), flag=wx.ALL)
210 def AddCombo(self, label, options):
211 combo = wx.ComboBox(self, -1, options[0], choices=options, style=wx.CB_DROPDOWN|wx.CB_READONLY)
212 text = wx.StaticText(self, -1, label)
213 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
214 self.GetSizer().Add(combo, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
227 class PrintrbotPage(InfoPage):
228 def __init__(self, parent):
229 self._printer_info = [
230 # X, Y, Z, Nozzle Size, Filament Diameter, PrintTemperature, Print Speed, Travel Speed, Retract speed, Retract amount, use bed level sensor
231 ("Simple Metal", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, True),
232 ("Metal Plus", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
233 ("Simple Makers Kit", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, True),
234 (":" + _("Older models"),),
235 ("Original", 130, 130, 130, 0.5, 2.95, 208, 40, 70, 30, 1, False),
236 ("Simple Maker's Edition v1", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
237 ("Simple Maker's Edition v2 (2013 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
238 ("Simple Maker's Edition v3 (2014 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
239 ("Jr v1", 115, 120, 80, 0.4, 1.75, 208, 40, 70, 30, 1, False),
240 ("Jr v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
241 ("LC v1", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
242 ("LC v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
243 ("Plus v1", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
244 ("Plus v2", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
245 ("Plus v2.1", 185, 220, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
246 ("Plus v2.2 (Model 1404/140422/140501/140507)", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
247 ("Go v2 Large", 505, 306, 310, 0.4, 1.75, 208, 35, 70, 30, 1, True),
250 super(PrintrbotPage, self).__init__(parent, _("Printrbot Selection"))
251 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Printrbot_logo.png')))
252 self.AddText(_("Select which Printrbot machine you have:"))
254 for printer in self._printer_info:
255 if printer[0].startswith(":"):
257 self.AddText(printer[0][1:])
259 item = self.AddRadioButton(printer[0])
260 item.data = printer[1:]
261 self._items.append(item)
264 profile.putMachineSetting('machine_name', 'Printrbot ???')
265 for item in self._items:
268 profile.putMachineSetting('machine_name', 'Printrbot ' + item.GetLabel())
269 profile.putMachineSetting('machine_width', data[0])
270 profile.putMachineSetting('machine_depth', data[1])
271 profile.putMachineSetting('machine_height', data[2])
272 profile.putProfileSetting('nozzle_size', data[3])
273 profile.putProfileSetting('filament_diameter', data[4])
274 profile.putProfileSetting('print_temperature', data[5])
275 profile.putProfileSetting('print_speed', data[6])
276 profile.putProfileSetting('travel_speed', data[7])
277 profile.putProfileSetting('retraction_speed', data[8])
278 profile.putProfileSetting('retraction_amount', data[9])
279 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
280 profile.putMachineSetting('has_heated_bed', 'False')
281 profile.putMachineSetting('machine_center_is_zero', 'False')
282 profile.putMachineSetting('extruder_head_size_min_x', '0')
283 profile.putMachineSetting('extruder_head_size_min_y', '0')
284 profile.putMachineSetting('extruder_head_size_max_x', '0')
285 profile.putMachineSetting('extruder_head_size_max_y', '0')
286 profile.putMachineSetting('extruder_head_size_height', '0')
288 profile.setAlterationFile('start.gcode', """;Sliced at: {day} {date} {time}
289 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
290 ;Print time: {print_time}
291 ;Filament used: {filament_amount}m {filament_weight}g
292 ;Filament cost: {filament_cost}
293 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
294 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
296 G90 ;absolute positioning
297 M82 ;set extruder to absolute mode
298 M107 ;start with the fan off
299 G28 X0 Y0 ;move X/Y to min endstops
300 G28 Z0 ;move Z to min endstops
301 G29 ;Run the auto bed leveling
302 G1 Z15.0 F{travel_speed} ;move the platform down 15mm
303 G92 E0 ;zero the extruded length
304 G1 F200 E3 ;extrude 3mm of feed stock
305 G92 E0 ;zero the extruded length again
307 ;Put printing message on LCD screen
311 class OtherMachineSelectPage(InfoPage):
312 def __init__(self, parent):
313 super(OtherMachineSelectPage, self).__init__(parent, _("Other machine information"))
314 self.AddText(_("The following pre-defined machine profiles are available"))
315 self.AddText(_("Note that these profiles are not guaranteed to give good results,\nor work at all. Extra tweaks might be required.\nIf you find issues with the predefined profiles,\nor want an extra profile.\nPlease report it at the github issue tracker."))
317 machines = resources.getDefaultMachineProfiles()
319 for filename in machines:
320 name = os.path.splitext(os.path.basename(filename))[0]
321 item = self.AddRadioButton(name)
322 item.filename = filename
323 item.Bind(wx.EVT_RADIOBUTTON, self.OnProfileSelect)
324 self.options.append(item)
326 item = self.AddRadioButton(_('Custom...'))
328 item.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
330 def OnProfileSelect(self, e):
331 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineInfoPage)
333 def OnOtherSelect(self, e):
334 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().customRepRapInfoPage)
337 for option in self.options:
338 if option.GetValue():
339 profile.loadProfile(option.filename)
340 profile.loadMachineSettings(option.filename)
342 class OtherMachineInfoPage(InfoPage):
343 def __init__(self, parent):
344 super(OtherMachineInfoPage, self).__init__(parent, _("Cura Ready!"))
345 self.AddText(_("Cura is now ready to be used!"))
347 class CustomRepRapInfoPage(InfoPage):
348 def __init__(self, parent):
349 super(CustomRepRapInfoPage, self).__init__(parent, _("Custom RepRap information"))
350 self.AddText(_("RepRap machines can be vastly different, so here you can set your own settings."))
351 self.AddText(_("Be sure to review the default profile before running it on your machine."))
352 self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
354 self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
356 self.machineName = self.AddLabelTextCtrl(_("Machine name"), "RepRap")
357 self.machineWidth = self.AddLabelTextCtrl(_("Machine width X (mm)"), "80")
358 self.machineDepth = self.AddLabelTextCtrl(_("Machine depth Y (mm)"), "80")
359 self.machineHeight = self.AddLabelTextCtrl(_("Machine height Z (mm)"), "55")
360 self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
361 self.heatedBed = self.AddCheckbox(_("Heated bed"))
362 self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
365 profile.putMachineSetting('machine_name', self.machineName.GetValue())
366 profile.putMachineSetting('machine_width', self.machineWidth.GetValue())
367 profile.putMachineSetting('machine_depth', self.machineDepth.GetValue())
368 profile.putMachineSetting('machine_height', self.machineHeight.GetValue())
369 profile.putProfileSetting('nozzle_size', self.nozzleSize.GetValue())
370 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
371 profile.putMachineSetting('has_heated_bed', str(self.heatedBed.GetValue()))
372 profile.putMachineSetting('machine_center_is_zero', str(self.HomeAtCenter.GetValue()))
373 profile.putMachineSetting('extruder_head_size_min_x', '0')
374 profile.putMachineSetting('extruder_head_size_min_y', '0')
375 profile.putMachineSetting('extruder_head_size_max_x', '0')
376 profile.putMachineSetting('extruder_head_size_max_y', '0')
377 profile.putMachineSetting('extruder_head_size_height', '0')
378 profile.checkAndUpdateMachineName()
380 class MachineSelectPage(InfoPage):
381 def __init__(self, parent):
382 super(MachineSelectPage, self).__init__(parent, _("Select your machine"))
383 self.AddText(_("What kind of machine do you have:"))
385 self.LulzbotMiniRadio = self.AddRadioButton("LulzBot Mini", style=wx.RB_GROUP)
386 self.LulzbotMiniRadio.Bind(wx.EVT_RADIOBUTTON, self.OnLulzbotSelect)
387 self.LulzbotMiniRadio.SetValue(True)
388 self.LulzbotTaz5Radio = self.AddRadioButton("LulzBot TAZ 5")
389 self.LulzbotTaz5Radio.Bind(wx.EVT_RADIOBUTTON, self.OnTaz5Select)
390 self.LulzbotTaz4Radio = self.AddRadioButton("LulzBot TAZ 4")
391 self.LulzbotTaz4Radio.Bind(wx.EVT_RADIOBUTTON, self.OnLulzbotSelect)
392 self.Ultimaker2Radio = self.AddRadioButton("Ultimaker2")
393 self.Ultimaker2Radio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
394 self.Ultimaker2ExtRadio = self.AddRadioButton("Ultimaker2extended")
395 self.Ultimaker2ExtRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
396 self.Ultimaker2GoRadio = self.AddRadioButton("Ultimaker2go")
397 self.Ultimaker2GoRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
398 self.UltimakerRadio = self.AddRadioButton("Ultimaker Original")
399 self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
400 self.UltimakerOPRadio = self.AddRadioButton("Ultimaker Original+")
401 self.UltimakerOPRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerOPSelect)
402 self.PrintrbotRadio = self.AddRadioButton("Printrbot")
403 self.PrintrbotRadio.Bind(wx.EVT_RADIOBUTTON, self.OnPrintrbotSelect)
404 self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap, MakerBot, Witbox)"))
405 self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
407 def OnUltimaker2Select(self, e):
408 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimaker2ReadyPage)
410 def OnUltimakerSelect(self, e):
411 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerSelectParts)
413 def OnUltimakerOPSelect(self, e):
414 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerFirmwareUpgradePage)
416 def OnPrintrbotSelect(self, e):
417 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().printrbotSelectType)
419 def OnLulzbotSelect(self, e):
420 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
422 def OnTaz5Select(self, e):
423 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().taz5NozzleSelectPage)
425 def OnOtherSelect(self, e):
426 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
432 profile.putProfileSetting('retraction_enable', 'True')
433 if self.Ultimaker2Radio.GetValue() or self.Ultimaker2GoRadio.GetValue() or self.Ultimaker2ExtRadio.GetValue():
434 if self.Ultimaker2Radio.GetValue():
435 profile.putMachineSetting('machine_width', '230')
436 profile.putMachineSetting('machine_depth', '225')
437 profile.putMachineSetting('machine_height', '205')
438 profile.putMachineSetting('machine_name', 'ultimaker2')
439 profile.putMachineSetting('machine_type', 'ultimaker2')
440 profile.putMachineSetting('has_heated_bed', 'True')
441 if self.Ultimaker2GoRadio.GetValue():
442 profile.putMachineSetting('machine_width', '120')
443 profile.putMachineSetting('machine_depth', '120')
444 profile.putMachineSetting('machine_height', '115')
445 profile.putMachineSetting('machine_name', 'ultimaker2go')
446 profile.putMachineSetting('machine_type', 'ultimaker2go')
447 profile.putMachineSetting('has_heated_bed', 'False')
448 if self.Ultimaker2ExtRadio.GetValue():
449 profile.putMachineSetting('machine_width', '230')
450 profile.putMachineSetting('machine_depth', '225')
451 profile.putMachineSetting('machine_height', '315')
452 profile.putMachineSetting('machine_name', 'ultimaker2extended')
453 profile.putMachineSetting('machine_type', 'ultimaker2extended')
454 profile.putMachineSetting('has_heated_bed', 'False')
455 profile.putMachineSetting('machine_center_is_zero', 'False')
456 profile.putMachineSetting('gcode_flavor', 'UltiGCode')
457 profile.putMachineSetting('extruder_head_size_min_x', '40.0')
458 profile.putMachineSetting('extruder_head_size_min_y', '10.0')
459 profile.putMachineSetting('extruder_head_size_max_x', '60.0')
460 profile.putMachineSetting('extruder_head_size_max_y', '30.0')
461 profile.putMachineSetting('extruder_head_size_height', '48.0')
462 profile.putProfileSetting('nozzle_size', '0.4')
463 profile.putProfileSetting('fan_full_height', '5.0')
464 profile.putMachineSetting('extruder_offset_x1', '18.0')
465 profile.putMachineSetting('extruder_offset_y1', '0.0')
466 elif self.UltimakerRadio.GetValue():
467 profile.putMachineSetting('machine_width', '205')
468 profile.putMachineSetting('machine_depth', '205')
469 profile.putMachineSetting('machine_height', '200')
470 profile.putMachineSetting('machine_name', 'ultimaker original')
471 profile.putMachineSetting('machine_type', 'ultimaker')
472 profile.putMachineSetting('machine_center_is_zero', 'False')
473 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
474 profile.putProfileSetting('nozzle_size', '0.4')
475 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
476 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
477 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
478 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
479 profile.putMachineSetting('extruder_head_size_height', '55.0')
480 elif self.UltimakerOPRadio.GetValue():
481 profile.putMachineSetting('machine_width', '205')
482 profile.putMachineSetting('machine_depth', '205')
483 profile.putMachineSetting('machine_height', '200')
484 profile.putMachineSetting('machine_name', 'ultimaker original+')
485 profile.putMachineSetting('machine_type', 'ultimaker_plus')
486 profile.putMachineSetting('machine_center_is_zero', 'False')
487 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
488 profile.putProfileSetting('nozzle_size', '0.4')
489 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
490 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
491 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
492 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
493 profile.putMachineSetting('extruder_head_size_height', '55.0')
494 profile.putMachineSetting('has_heated_bed', 'True')
495 profile.putMachineSetting('extruder_amount', '1')
496 profile.putProfileSetting('retraction_enable', 'True')
497 elif self.LulzbotTaz4Radio.GetValue() or self.LulzbotTaz5Radio.GetValue() or self.LulzbotMiniRadio.GetValue():
498 if self.LulzbotTaz4Radio.GetValue():
499 profile.putMachineSetting('machine_width', '298')
500 profile.putMachineSetting('machine_depth', '275')
501 profile.putMachineSetting('machine_height', '250')
502 profile.putProfileSetting('nozzle_size', '0.35')
503 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
504 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4')
505 profile.putMachineSetting('serial_baud', '115200')
506 elif self.LulzbotTaz5Radio.GetValue():
507 profile.putMachineSetting('machine_width', '298')
508 profile.putMachineSetting('machine_depth', '275')
509 profile.putMachineSetting('machine_height', '250')
510 profile.putMachineSetting('serial_baud', '115200')
511 # Machine type and name are set in the nozzle select page
513 profile.putMachineSetting('machine_width', '155')
514 profile.putMachineSetting('machine_depth', '155')
515 profile.putMachineSetting('machine_height', '163')
516 profile.putProfileSetting('nozzle_size', '0.5')
517 profile.putMachineSetting('machine_name', 'LulzBot Mini')
518 profile.putMachineSetting('machine_type', 'lulzbot_mini')
519 profile.putMachineSetting('serial_baud', '115200')
520 profile.putMachineSetting('extruder_head_size_min_x', '40')
521 profile.putMachineSetting('extruder_head_size_max_x', '75')
522 profile.putMachineSetting('extruder_head_size_min_y', '25')
523 profile.putMachineSetting('extruder_head_size_max_y', '55')
524 profile.putMachineSetting('extruder_head_size_height', '17')
526 profile.putMachineSetting('machine_center_is_zero', 'False')
527 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
528 profile.putMachineSetting('has_heated_bed', 'True')
529 profile.putMachineSetting('extruder_head_size_min_x', '0.0')
530 profile.putMachineSetting('extruder_head_size_min_y', '0.0')
531 profile.putMachineSetting('extruder_head_size_max_x', '0.0')
532 profile.putMachineSetting('extruder_head_size_max_y', '0.0')
533 profile.putMachineSetting('extruder_head_size_height', '0.0')
534 profile.putPreference('startMode', 'Simple')
536 profile.putMachineSetting('machine_width', '80')
537 profile.putMachineSetting('machine_depth', '80')
538 profile.putMachineSetting('machine_height', '60')
539 profile.putMachineSetting('machine_name', 'reprap')
540 profile.putMachineSetting('machine_type', 'reprap')
541 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
542 profile.putPreference('startMode', 'Normal')
543 profile.putProfileSetting('nozzle_size', '0.5')
544 profile.checkAndUpdateMachineName()
545 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
547 class SelectParts(InfoPage):
548 def __init__(self, parent):
549 super(SelectParts, self).__init__(parent, _("Select upgraded parts you have"))
550 self.AddText(_("To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine."))
552 self.springExtruder = self.AddCheckbox(_("Extruder drive upgrade"))
553 self.heatedBedKit = self.AddCheckbox(_("Heated printer bed (kit)"))
554 self.heatedBed = self.AddCheckbox(_("Heated printer bed (self built)"))
555 self.dualExtrusion = self.AddCheckbox(_("Dual extrusion (experimental)"))
557 self.AddText(_("If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability."))
558 self.AddText(_("This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094"))
559 self.springExtruder.SetValue(True)
562 profile.putMachineSetting('ultimaker_extruder_upgrade', str(self.springExtruder.GetValue()))
563 if self.heatedBed.GetValue() or self.heatedBedKit.GetValue():
564 profile.putMachineSetting('has_heated_bed', 'True')
566 profile.putMachineSetting('has_heated_bed', 'False')
567 if self.dualExtrusion.GetValue():
568 profile.putMachineSetting('extruder_amount', '2')
569 profile.putMachineSetting('machine_depth', '195')
571 profile.putMachineSetting('extruder_amount', '1')
572 if profile.getMachineSetting('ultimaker_extruder_upgrade') == 'True':
573 profile.putProfileSetting('retraction_enable', 'True')
575 profile.putProfileSetting('retraction_enable', 'False')
578 class UltimakerFirmwareUpgradePage(InfoPage):
579 def __init__(self, parent):
580 super(UltimakerFirmwareUpgradePage, self).__init__(parent, _("Upgrade Ultimaker Firmware"))
581 self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the step motors, regulates the temperature\nand ultimately makes your printer work."))
582 self.AddHiddenSeperator()
583 self.AddText(_("The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier."))
584 self.AddHiddenSeperator()
585 self.AddText(_("Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now."))
586 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Upgrade to Marlin firmware'), _('Skip upgrade'))
587 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
588 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
589 self.AddHiddenSeperator()
590 if profile.getMachineSetting('machine_type') == 'ultimaker':
591 self.AddText(_("Do not upgrade to this firmware if:"))
592 self.AddText(_("* You have an older machine based on ATMega1280 (Rev 1 machine)"))
593 self.AddText(_("* Build your own heated bed"))
594 self.AddText(_("* Have other changes in the firmware"))
595 # button = self.AddButton('Goto this page for a custom firmware')
596 # button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
601 def OnUpgradeClick(self, e):
602 if firmwareInstall.InstallFirmware():
603 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
605 def OnSkipClick(self, e):
606 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
607 self.GetParent().ShowPage(self.GetNext())
609 def OnUrlClick(self, e):
610 webbrowser.open('http://marlinbuilder.robotfuzz.com/')
612 class UltimakerCheckupPage(InfoPage):
613 def __init__(self, parent):
614 super(UltimakerCheckupPage, self).__init__(parent, _("Ultimaker Checkup"))
616 self.checkBitmap = wx.Bitmap(resources.getPathForImage('checkmark.png'))
617 self.crossBitmap = wx.Bitmap(resources.getPathForImage('cross.png'))
618 self.unknownBitmap = wx.Bitmap(resources.getPathForImage('question.png'))
619 self.endStopNoneBitmap = wx.Bitmap(resources.getPathForImage('endstop_none.png'))
620 self.endStopXMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmin.png'))
621 self.endStopXMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmax.png'))
622 self.endStopYMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymin.png'))
623 self.endStopYMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymax.png'))
624 self.endStopZMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmin.png'))
625 self.endStopZMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmax.png'))
628 _("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
629 b1, b2 = self.AddDualButton(_("Run checks"), _("Skip checks"))
630 b1.Bind(wx.EVT_BUTTON, self.OnCheckClick)
631 b2.Bind(wx.EVT_BUTTON, self.OnSkipClick)
633 self.commState = self.AddCheckmark(_("Communication:"), self.unknownBitmap)
634 self.tempState = self.AddCheckmark(_("Temperature:"), self.unknownBitmap)
635 self.stopState = self.AddCheckmark(_("Endstops:"), self.unknownBitmap)
637 self.infoBox = self.AddInfoBox()
638 self.machineState = self.AddText("")
639 self.temperatureLabel = self.AddText("")
640 self.errorLogButton = self.AddButton(_("Show error log"))
641 self.errorLogButton.Show(False)
643 self.endstopBitmap = self.AddBitmap(self.endStopNoneBitmap)
645 self.xMinStop = False
646 self.xMaxStop = False
647 self.yMinStop = False
648 self.yMaxStop = False
649 self.zMinStop = False
650 self.zMaxStop = False
652 self.Bind(wx.EVT_BUTTON, self.OnErrorLog, self.errorLogButton)
655 if self.comm is not None:
659 self.endstopBitmap.Show(False)
662 def OnSkipClick(self, e):
663 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
664 self.GetParent().ShowPage(self.GetNext())
666 def OnCheckClick(self, e=None):
667 self.errorLogButton.Show(False)
668 if self.comm is not None:
672 wx.CallAfter(self.OnCheckClick)
674 self.infoBox.SetBusy(_("Connecting to machine."))
675 self.commState.SetBitmap(self.unknownBitmap)
676 self.tempState.SetBitmap(self.unknownBitmap)
677 self.stopState.SetBitmap(self.unknownBitmap)
678 self.checkupState = 0
679 self.checkExtruderNr = 0
680 self.comm = machineCom.MachineCom(callbackObject=self)
682 def OnErrorLog(self, e):
683 printWindow.LogWindow('\n'.join(self.comm.getLog()))
685 def mcLog(self, message):
688 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
689 if not self.comm.isOperational():
691 if self.checkupState == 0:
692 self.tempCheckTimeout = 20
693 if temp[self.checkExtruderNr] > 70:
694 self.checkupState = 1
695 wx.CallAfter(self.infoBox.SetInfo, _("Cooldown before temperature check."))
696 self.comm.sendCommand("M104 S0 T%d" % (self.checkExtruderNr))
697 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
699 self.startTemp = temp[self.checkExtruderNr]
700 self.checkupState = 2
701 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
702 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
703 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
704 elif self.checkupState == 1:
705 if temp[self.checkExtruderNr] < 60:
706 self.startTemp = temp[self.checkExtruderNr]
707 self.checkupState = 2
708 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
709 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
710 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
711 elif self.checkupState == 2:
712 #print "WARNING, TEMPERATURE TEST DISABLED FOR TESTING!"
713 if temp[self.checkExtruderNr] > self.startTemp + 40:
714 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
715 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
716 if self.checkExtruderNr < int(profile.getMachineSetting('extruder_amount')):
717 self.checkExtruderNr = 0
718 self.checkupState = 3
719 wx.CallAfter(self.infoBox.SetAttention, _("Please make sure none of the endstops are pressed."))
720 wx.CallAfter(self.endstopBitmap.Show, True)
721 wx.CallAfter(self.Layout)
722 self.comm.sendCommand('M119')
723 wx.CallAfter(self.tempState.SetBitmap, self.checkBitmap)
725 self.checkupState = 0
726 self.checkExtruderNr += 1
728 self.tempCheckTimeout -= 1
729 if self.tempCheckTimeout < 1:
730 self.checkupState = -1
731 wx.CallAfter(self.tempState.SetBitmap, self.crossBitmap)
732 wx.CallAfter(self.infoBox.SetError, _("Temperature measurement FAILED!"), 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
733 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
734 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
735 elif self.checkupState >= 3 and self.checkupState < 10:
736 self.comm.sendCommand('M119')
737 wx.CallAfter(self.temperatureLabel.SetLabel, _("Head temperature: %d") % (temp[self.checkExtruderNr]))
739 def mcStateChange(self, state):
740 if self.comm is None:
742 if self.comm.isOperational():
743 wx.CallAfter(self.commState.SetBitmap, self.checkBitmap)
744 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
745 elif self.comm.isError():
746 wx.CallAfter(self.commState.SetBitmap, self.crossBitmap)
747 wx.CallAfter(self.infoBox.SetError, _("Failed to establish connection with the printer."), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
748 wx.CallAfter(self.endstopBitmap.Show, False)
749 wx.CallAfter(self.machineState.SetLabel, '%s' % (self.comm.getErrorString()))
750 wx.CallAfter(self.errorLogButton.Show, True)
751 wx.CallAfter(self.Layout)
753 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
755 def mcMessage(self, message):
756 if self.checkupState >= 3 and self.checkupState < 10 and ('_min' in message or '_max' in message):
757 for data in message.split(' '):
759 tag, value = data.split(':', 1)
761 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
763 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
765 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
767 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
769 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
771 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
773 tag, value = map(str.strip, message.split(':', 1))
775 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
777 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
779 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
781 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
783 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
785 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
786 if 'z_max' in message:
787 self.comm.sendCommand('M119')
789 if self.checkupState == 3:
790 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
791 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
792 self.checkupState = 5
793 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
794 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
796 self.checkupState = 4
797 wx.CallAfter(self.infoBox.SetAttention, _("Please press the right X endstop."))
798 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMaxBitmap)
799 elif self.checkupState == 4:
800 if not self.xMinStop and self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
801 self.checkupState = 5
802 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
803 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
804 elif self.checkupState == 5:
805 if self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
806 self.checkupState = 6
807 wx.CallAfter(self.infoBox.SetAttention, _("Please press the front Y endstop."))
808 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMinBitmap)
809 elif self.checkupState == 6:
810 if not self.xMinStop and not self.xMaxStop and self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
811 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
812 self.checkupState = 8
813 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
814 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
816 self.checkupState = 7
817 wx.CallAfter(self.infoBox.SetAttention, _("Please press the back Y endstop."))
818 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMaxBitmap)
819 elif self.checkupState == 7:
820 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and self.yMaxStop and not self.zMinStop and not self.zMaxStop:
821 self.checkupState = 8
822 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
823 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
824 elif self.checkupState == 8:
825 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and self.zMinStop and not self.zMaxStop:
826 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
827 self.checkupState = 10
829 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
830 wx.CallAfter(self.infoBox.SetReadyIndicator)
831 wx.CallAfter(self.endstopBitmap.Show, False)
832 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
833 wx.CallAfter(self.OnSkipClick, None)
835 self.checkupState = 9
836 wx.CallAfter(self.infoBox.SetAttention, _("Please press the bottom Z endstop."))
837 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMaxBitmap)
838 elif self.checkupState == 9:
839 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and self.zMaxStop:
840 self.checkupState = 10
842 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
843 wx.CallAfter(self.infoBox.SetReadyIndicator)
844 wx.CallAfter(self.endstopBitmap.Show, False)
845 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
846 wx.CallAfter(self.OnSkipClick, None)
848 def mcProgress(self, lineNr):
851 def mcZChange(self, newZ):
855 class UltimakerCalibrationPage(InfoPage):
856 def __init__(self, parent):
857 super(UltimakerCalibrationPage, self).__init__(parent, _("Ultimaker Calibration"))
859 self.AddText("Your Ultimaker requires some calibration.")
860 self.AddText("This calibration is needed for a proper extrusion amount.")
862 self.AddText("The following values are needed:")
863 self.AddText("* Diameter of filament")
864 self.AddText("* Number of steps per mm of filament extrusion")
866 self.AddText("The better you have calibrated these values, the better your prints\nwill become.")
868 self.AddText("First we need the diameter of your filament:")
869 self.filamentDiameter = self.AddTextCtrl(profile.getProfileSetting('filament_diameter'))
871 "If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.")
872 self.AddText("Note: This value can be changed later at any time.")
875 profile.putProfileSetting('filament_diameter', self.filamentDiameter.GetValue())
878 class UltimakerCalibrateStepsPerEPage(InfoPage):
879 def __init__(self, parent):
880 super(UltimakerCalibrateStepsPerEPage, self).__init__(parent, _("Ultimaker Calibration"))
882 #if profile.getMachineSetting('steps_per_e') == '0':
883 # profile.putMachineSetting('steps_per_e', '865.888')
885 self.AddText(_("Calibrating the Steps Per E requires some manual actions."))
886 self.AddText(_("First remove any filament from your machine."))
887 self.AddText(_("Next put in your filament so the tip is aligned with the\ntop of the extruder drive."))
888 self.AddText(_("We'll push the filament 100mm"))
889 self.extrudeButton = self.AddButton(_("Extrude 100mm filament"))
890 self.AddText(_("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)"))
891 self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton("100", _("Save"))
892 self.AddText(_("This results in the following steps per E:"))
893 self.stepsPerEInput = self.AddTextCtrl(profile.getMachineSetting('steps_per_e'))
894 self.AddText(_("You can repeat these steps to get better calibration."))
897 _("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:"))
898 self.heatButton = self.AddButton(_("Heatup for filament removal"))
900 self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
901 self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
902 self.heatButton.Bind(wx.EVT_BUTTON, self.OnHeatClick)
904 def OnSaveLengthClick(self, e):
905 currentEValue = float(self.stepsPerEInput.GetValue())
906 realExtrudeLength = float(self.lengthInput.GetValue())
907 newEValue = currentEValue * 100 / realExtrudeLength
908 self.stepsPerEInput.SetValue(str(newEValue))
909 self.lengthInput.SetValue("100")
911 def OnExtrudeClick(self, e):
912 t = threading.Thread(target=self.OnExtrudeRun)
916 def OnExtrudeRun(self):
917 self.heatButton.Enable(False)
918 self.extrudeButton.Enable(False)
919 currentEValue = float(self.stepsPerEInput.GetValue())
920 self.comm = machineCom.MachineCom()
921 if not self.comm.isOpen():
923 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
924 'Printer error', wx.OK | wx.ICON_INFORMATION)
925 self.heatButton.Enable(True)
926 self.extrudeButton.Enable(True)
929 line = self.comm.readline()
934 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
937 self.sendGCommand('M302') #Disable cold extrusion protection
938 self.sendGCommand("M92 E%f" % (currentEValue))
939 self.sendGCommand("G92 E0")
940 self.sendGCommand("G1 E100 F600")
943 self.extrudeButton.Enable()
944 self.heatButton.Enable()
946 def OnHeatClick(self, e):
947 t = threading.Thread(target=self.OnHeatRun)
952 self.heatButton.Enable(False)
953 self.extrudeButton.Enable(False)
954 self.comm = machineCom.MachineCom()
955 if not self.comm.isOpen():
957 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
958 'Printer error', wx.OK | wx.ICON_INFORMATION)
959 self.heatButton.Enable(True)
960 self.extrudeButton.Enable(True)
963 line = self.comm.readline()
965 self.heatButton.Enable(True)
966 self.extrudeButton.Enable(True)
970 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
973 self.sendGCommand('M104 S200') #Set the temperature to 200C, should be enough to get PLA and ABS out.
975 'Wait till you can remove the filament from the machine, and press OK.\n(Temperature is set to 200C)',
976 'Machine heatup', wx.OK | wx.ICON_INFORMATION)
977 self.sendGCommand('M104 S0')
980 self.heatButton.Enable(True)
981 self.extrudeButton.Enable(True)
983 def sendGCommand(self, cmd):
984 self.comm.sendCommand(cmd) #Disable cold extrusion protection
986 line = self.comm.readline()
989 if line.startswith('ok'):
993 profile.putPreference('steps_per_e', self.stepsPerEInput.GetValue())
995 class Ultimaker2ReadyPage(InfoPage):
996 def __init__(self, parent):
997 super(Ultimaker2ReadyPage, self).__init__(parent, _("Ultimaker2"))
998 self.AddText(_('Congratulations on your the purchase of your brand new Ultimaker2.'))
999 self.AddText(_('Cura is now ready to be used with your Ultimaker2.'))
1002 class LulzbotReadyPage(InfoPage):
1003 def __init__(self, parent):
1004 super(LulzbotReadyPage, self).__init__(parent, _("LulzBot TAZ/Mini"))
1005 self.AddText(_('Cura is now ready to be used with your LulzBot 3D printer.'))
1007 self.AddText(_('For more information about using Cura with your LulzBot'))
1008 self.AddText(_('3D printer, please visit www.LulzBot.com/cura'))
1011 class Taz5NozzleSelectPage(InfoPage):
1012 url='http://lulzbot.com/printer-identification'
1014 def __init__(self, parent):
1015 super(Taz5NozzleSelectPage, self).__init__(parent, _("LulzBot TAZ5"))
1016 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1018 self.AddText(_(' '))
1019 self.AddText(_('Please select nozzle size:'))
1020 self.Nozzle35Radio = self.AddRadioButton("0.35 mm", style=wx.RB_GROUP)
1021 self.Nozzle35Radio.Bind(wx.EVT_RADIOBUTTON, self.OnNozzleSelect)
1022 self.Nozzle50Radio = self.AddRadioButton("0.5 mm")
1023 self.Nozzle50Radio.Bind(wx.EVT_RADIOBUTTON, self.OnNozzleSelect)
1024 self.Nozzle50Radio.SetValue(True)
1025 self.AddText(_(' '))
1028 self.AddText(_('If you are not sure which nozzle size you have please check this webpage: '))
1029 button = self.AddButton(Taz5NozzleSelectPage.url)
1030 button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
1032 def OnUrlClick(self, e):
1033 webbrowser.open(Taz5NozzleSelectPage.url)
1035 def OnNozzleSelect(self, e):
1036 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1038 def StoreData(self):
1039 if self.Nozzle35Radio.GetValue():
1040 profile.putProfileSetting('nozzle_size', '0.35')
1041 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5 (0.35 nozzle)')
1042 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
1045 profile.putProfileSetting('nozzle_size', '0.5')
1046 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5 (0.5 nozzle)')
1047 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5_05nozzle')
1049 def OnPageChanging(self, e):
1050 e.GetPage().StoreData()
1052 class ConfigWizard(wx.wizard.Wizard):
1053 def __init__(self, addNew = False):
1054 super(ConfigWizard, self).__init__(None, -1, _("Configuration Wizard"))
1056 self._old_machine_index = int(profile.getPreferenceFloat('active_machine'))
1058 profile.setActiveMachine(profile.getMachineCount())
1060 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1061 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1062 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1064 self.machineSelectPage = MachineSelectPage(self)
1065 self.ultimakerSelectParts = SelectParts(self)
1066 self.ultimakerFirmwareUpgradePage = UltimakerFirmwareUpgradePage(self)
1067 self.ultimakerCheckupPage = UltimakerCheckupPage(self)
1068 self.ultimakerCalibrationPage = UltimakerCalibrationPage(self)
1069 self.ultimakerCalibrateStepsPerEPage = UltimakerCalibrateStepsPerEPage(self)
1070 self.bedLevelPage = bedLevelWizardMain(self)
1071 self.headOffsetCalibration = headOffsetCalibrationPage(self)
1072 self.printrbotSelectType = PrintrbotPage(self)
1073 self.otherMachineSelectPage = OtherMachineSelectPage(self)
1074 self.customRepRapInfoPage = CustomRepRapInfoPage(self)
1075 self.otherMachineInfoPage = OtherMachineInfoPage(self)
1077 self.ultimaker2ReadyPage = Ultimaker2ReadyPage(self)
1078 self.lulzbotReadyPage = LulzbotReadyPage(self)
1079 self.taz5NozzleSelectPage = Taz5NozzleSelectPage(self)
1081 #wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.ultimaker2ReadyPage)
1082 wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.ultimakerSelectParts)
1083 wx.wizard.WizardPageSimple.Chain(self.ultimakerSelectParts, self.ultimakerFirmwareUpgradePage)
1084 wx.wizard.WizardPageSimple.Chain(self.ultimakerFirmwareUpgradePage, self.ultimakerCheckupPage)
1085 wx.wizard.WizardPageSimple.Chain(self.ultimakerCheckupPage, self.bedLevelPage)
1086 #wx.wizard.WizardPageSimple.Chain(self.ultimakerCalibrationPage, self.ultimakerCalibrateStepsPerEPage)
1087 wx.wizard.WizardPageSimple.Chain(self.printrbotSelectType, self.otherMachineInfoPage)
1088 wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
1089 wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.lulzbotReadyPage)
1091 self.FitToPage(self.machineSelectPage)
1092 self.GetPageAreaSizer().Add(self.machineSelectPage)
1094 self.RunWizard(self.machineSelectPage)
1097 def OnPageChanging(self, e):
1098 e.GetPage().StoreData()
1100 def OnPageChanged(self, e):
1101 if e.GetPage().AllowNext():
1102 self.FindWindowById(wx.ID_FORWARD).Enable()
1104 self.FindWindowById(wx.ID_FORWARD).Disable()
1105 if e.GetPage().AllowBack():
1106 self.FindWindowById(wx.ID_BACKWARD).Enable()
1108 self.FindWindowById(wx.ID_BACKWARD).Disable()
1110 def OnCancel(self, e):
1111 new_machine_index = int(profile.getPreferenceFloat('active_machine'))
1112 profile.setActiveMachine(self._old_machine_index)
1113 profile.removeMachine(new_machine_index)
1115 class bedLevelWizardMain(InfoPage):
1116 def __init__(self, parent):
1117 super(bedLevelWizardMain, self).__init__(parent, _("Bed leveling wizard"))
1119 self.AddText(_('This wizard will help you in leveling your printer bed'))
1121 self.AddText(_('It will do the following steps'))
1122 self.AddText(_('* Move the printer head to each corner'))
1123 self.AddText(_(' and let you adjust the height of the bed to the nozzle'))
1124 self.AddText(_('* Print a line around the bed to check if it is level'))
1127 self.connectButton = self.AddButton(_('Connect to printer'))
1130 self.infoBox = self.AddInfoBox()
1131 self.resumeButton = self.AddButton(_('Resume'))
1132 self.upButton, self.downButton = self.AddDualButton(_('Up 0.2mm'), _('Down 0.2mm'))
1133 self.upButton2, self.downButton2 = self.AddDualButton(_('Up 10mm'), _('Down 10mm'))
1134 self.resumeButton.Enable(False)
1136 self.upButton.Enable(False)
1137 self.downButton.Enable(False)
1138 self.upButton2.Enable(False)
1139 self.downButton2.Enable(False)
1141 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1142 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1143 self.Bind(wx.EVT_BUTTON, self.OnBedUp, self.upButton)
1144 self.Bind(wx.EVT_BUTTON, self.OnBedDown, self.downButton)
1145 self.Bind(wx.EVT_BUTTON, self.OnBedUp2, self.upButton2)
1146 self.Bind(wx.EVT_BUTTON, self.OnBedDown2, self.downButton2)
1148 def OnConnect(self, e = None):
1149 if self.comm is not None:
1153 wx.CallAfter(self.OnConnect)
1155 self.connectButton.Enable(False)
1156 self.comm = machineCom.MachineCom(callbackObject=self)
1157 self.infoBox.SetBusy(_('Connecting to machine.'))
1158 self._wizardState = 0
1160 def OnBedUp(self, e):
1161 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1162 self.comm.sendCommand('G92 Z10')
1163 self.comm.sendCommand('G1 Z9.8 F%d' % (feedZ))
1164 self.comm.sendCommand('M400')
1166 def OnBedDown(self, e):
1167 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1168 self.comm.sendCommand('G92 Z10')
1169 self.comm.sendCommand('G1 Z10.2 F%d' % (feedZ))
1170 self.comm.sendCommand('M400')
1172 def OnBedUp2(self, e):
1173 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1174 self.comm.sendCommand('G92 Z10')
1175 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1176 self.comm.sendCommand('M400')
1178 def OnBedDown2(self, e):
1179 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1180 self.comm.sendCommand('G92 Z10')
1181 self.comm.sendCommand('G1 Z20 F%d' % (feedZ))
1182 self.comm.sendCommand('M400')
1184 def AllowNext(self):
1185 if self.GetParent().headOffsetCalibration is not None and int(profile.getMachineSetting('extruder_amount')) > 1:
1186 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().headOffsetCalibration)
1189 def OnResume(self, e):
1190 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1191 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1192 if self._wizardState == -1:
1193 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer...'))
1194 wx.CallAfter(self.upButton.Enable, False)
1195 wx.CallAfter(self.downButton.Enable, False)
1196 wx.CallAfter(self.upButton2.Enable, False)
1197 wx.CallAfter(self.downButton2.Enable, False)
1198 self.comm.sendCommand('M105')
1199 self.comm.sendCommand('G28')
1200 self._wizardState = 1
1201 elif self._wizardState == 2:
1202 if profile.getMachineSetting('has_heated_bed') == 'True':
1203 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back center...'))
1204 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1205 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') / 2.0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1206 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1207 self.comm.sendCommand('M400')
1208 self._wizardState = 3
1210 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back left corner...'))
1211 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1212 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1213 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1214 self.comm.sendCommand('M400')
1215 self._wizardState = 3
1216 elif self._wizardState == 4:
1217 if profile.getMachineSetting('has_heated_bed') == 'True':
1218 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1219 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1220 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 5, feedTravel))
1221 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1222 self.comm.sendCommand('M400')
1223 self._wizardState = 7
1225 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back right corner...'))
1226 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1227 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, profile.getMachineSettingFloat('machine_depth') - 25, feedTravel))
1228 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1229 self.comm.sendCommand('M400')
1230 self._wizardState = 5
1231 elif self._wizardState == 6:
1232 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1233 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1234 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 20, feedTravel))
1235 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1236 self.comm.sendCommand('M400')
1237 self._wizardState = 7
1238 elif self._wizardState == 8:
1239 wx.CallAfter(self.infoBox.SetBusy, _('Heating up printer...'))
1240 self.comm.sendCommand('G1 Z15 F%d' % (feedZ))
1241 self.comm.sendCommand('M104 S%d' % (profile.getProfileSettingFloat('print_temperature')))
1242 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, 0, feedTravel))
1243 self._wizardState = 9
1244 elif self._wizardState == 10:
1245 self._wizardState = 11
1246 wx.CallAfter(self.infoBox.SetInfo, _('Printing a square on the printer bed at 0.3mm height.'))
1247 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1248 feedPrint = profile.getProfileSettingFloat('print_speed') * 60
1249 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1250 w = profile.getMachineSettingFloat('machine_width') - 10
1251 d = profile.getMachineSettingFloat('machine_depth')
1252 filamentRadius = profile.getProfileSettingFloat('filament_diameter') / 2
1253 filamentArea = math.pi * filamentRadius * filamentRadius
1254 ePerMM = (profile.calculateEdgeWidth() * 0.3) / filamentArea
1258 'G1 Z2 F%d' % (feedZ),
1260 'G1 X%d Y%d F%d' % (5, 5, feedTravel),
1261 'G1 Z0.3 F%d' % (feedZ)]
1263 gcodeList.append('G1 E%f F%d' % (eValue, profile.getProfileSettingFloat('retraction_speed') * 60))
1265 for i in xrange(0, 3):
1266 dist = 5.0 + 0.4 * float(i)
1267 eValue += (d - 2.0*dist) * ePerMM
1268 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, d - dist, eValue, feedPrint))
1269 eValue += (w - 2.0*dist) * ePerMM
1270 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, d - dist, eValue, feedPrint))
1271 eValue += (d - 2.0*dist) * ePerMM
1272 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, dist, eValue, feedPrint))
1273 eValue += (w - 2.0*dist) * ePerMM
1274 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, dist, eValue, feedPrint))
1276 gcodeList.append('M400')
1277 self.comm.printGCode(gcodeList)
1278 self.resumeButton.Enable(False)
1280 def mcLog(self, message):
1281 print 'Log:', message
1283 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1284 if self._wizardState == 1:
1285 self._wizardState = 2
1286 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front left screw of your printer bed\nSo the nozzle just hits the bed.'))
1287 wx.CallAfter(self.resumeButton.Enable, True)
1288 elif self._wizardState == 3:
1289 self._wizardState = 4
1290 if profile.getMachineSetting('has_heated_bed') == 'True':
1291 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back screw of your printer bed\nSo the nozzle just hits the bed.'))
1293 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back left screw of your printer bed\nSo the nozzle just hits the bed.'))
1294 wx.CallAfter(self.resumeButton.Enable, True)
1295 elif self._wizardState == 5:
1296 self._wizardState = 6
1297 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back right screw of your printer bed\nSo the nozzle just hits the bed.'))
1298 wx.CallAfter(self.resumeButton.Enable, True)
1299 elif self._wizardState == 7:
1300 self._wizardState = 8
1301 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front right screw of your printer bed\nSo the nozzle just hits the bed.'))
1302 wx.CallAfter(self.resumeButton.Enable, True)
1303 elif self._wizardState == 9:
1304 if temp[0] < profile.getProfileSettingFloat('print_temperature') - 5:
1305 wx.CallAfter(self.infoBox.SetInfo, _('Heating up printer: %d/%d') % (temp[0], profile.getProfileSettingFloat('print_temperature')))
1307 wx.CallAfter(self.infoBox.SetAttention, _('The printer is hot now. Please insert some PLA filament into the printer.'))
1308 wx.CallAfter(self.resumeButton.Enable, True)
1309 self._wizardState = 10
1311 def mcStateChange(self, state):
1312 if self.comm is None:
1314 if self.comm.isOperational():
1315 if self._wizardState == 0:
1316 wx.CallAfter(self.infoBox.SetAttention, _('Use the up/down buttons to move the bed and adjust your Z endstop.'))
1317 wx.CallAfter(self.upButton.Enable, True)
1318 wx.CallAfter(self.downButton.Enable, True)
1319 wx.CallAfter(self.upButton2.Enable, True)
1320 wx.CallAfter(self.downButton2.Enable, True)
1321 wx.CallAfter(self.resumeButton.Enable, True)
1322 self._wizardState = -1
1323 elif self._wizardState == 11 and not self.comm.isPrinting():
1324 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1325 self.comm.sendCommand('G92 E0')
1326 self.comm.sendCommand('G1 E-10 F%d' % (profile.getProfileSettingFloat('retraction_speed') * 60))
1327 self.comm.sendCommand('M104 S0')
1328 wx.CallAfter(self.infoBox.SetInfo, _('Calibration finished.\nThe squares on the bed should slightly touch each other.'))
1329 wx.CallAfter(self.infoBox.SetReadyIndicator)
1330 wx.CallAfter(self.GetParent().FindWindowById(wx.ID_FORWARD).Enable)
1331 wx.CallAfter(self.connectButton.Enable, True)
1332 self._wizardState = 12
1333 elif self.comm.isError():
1334 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1336 def mcMessage(self, message):
1339 def mcProgress(self, lineNr):
1342 def mcZChange(self, newZ):
1345 class headOffsetCalibrationPage(InfoPage):
1346 def __init__(self, parent):
1347 super(headOffsetCalibrationPage, self).__init__(parent, _("Printer head offset calibration"))
1349 self.AddText(_('This wizard will help you in calibrating the printer head offsets of your dual extrusion machine'))
1352 self.connectButton = self.AddButton(_('Connect to printer'))
1355 self.infoBox = self.AddInfoBox()
1356 self.textEntry = self.AddTextCtrl('')
1357 self.textEntry.Enable(False)
1358 self.resumeButton = self.AddButton(_('Resume'))
1359 self.resumeButton.Enable(False)
1361 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1362 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1364 def AllowBack(self):
1367 def OnConnect(self, e = None):
1368 if self.comm is not None:
1372 wx.CallAfter(self.OnConnect)
1374 self.connectButton.Enable(False)
1375 self.comm = machineCom.MachineCom(callbackObject=self)
1376 self.infoBox.SetBusy(_('Connecting to machine.'))
1377 self._wizardState = 0
1379 def OnResume(self, e):
1380 if self._wizardState == 2:
1381 self._wizardState = 3
1382 wx.CallAfter(self.infoBox.SetBusy, _('Printing initial calibration cross'))
1384 w = profile.getMachineSettingFloat('machine_width')
1385 d = profile.getMachineSettingFloat('machine_depth')
1387 gcode = gcodeGenerator.gcodeGenerator()
1388 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1389 gcode.setPrintSpeed(profile.getProfileSettingFloat('bottom_layer_speed'))
1396 gcode.addMove(w/2, 5)
1397 gcode.addMove(z=0.2)
1399 gcode.addExtrude(w/2, d-5.0)
1401 gcode.addMove(5, d/2)
1403 gcode.addExtrude(w-5.0, d/2)
1404 gcode.addRetract(15)
1407 gcode.addMove(w/2, 5)
1409 gcode.addExtrude(w/2, d-5.0)
1411 gcode.addMove(5, d/2)
1413 gcode.addExtrude(w-5.0, d/2)
1414 gcode.addRetract(15)
1419 gcode.addCmd('M400')
1421 self.comm.printGCode(gcode.list())
1422 self.resumeButton.Enable(False)
1423 elif self._wizardState == 4:
1425 float(self.textEntry.GetValue())
1428 profile.putPreference('extruder_offset_x1', self.textEntry.GetValue())
1429 self._wizardState = 5
1430 self.infoBox.SetAttention(_('Please measure the distance between the horizontal lines in millimeters.'))
1431 self.textEntry.SetValue('0.0')
1432 self.textEntry.Enable(True)
1433 elif self._wizardState == 5:
1435 float(self.textEntry.GetValue())
1438 profile.putPreference('extruder_offset_y1', self.textEntry.GetValue())
1439 self._wizardState = 6
1440 self.infoBox.SetBusy(_('Printing the fine calibration lines.'))
1441 self.textEntry.SetValue('')
1442 self.textEntry.Enable(False)
1443 self.resumeButton.Enable(False)
1445 x = profile.getMachineSettingFloat('extruder_offset_x1')
1446 y = profile.getMachineSettingFloat('extruder_offset_y1')
1447 gcode = gcodeGenerator.gcodeGenerator()
1448 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1449 gcode.setPrintSpeed(25)
1452 gcode.addMove(50, 40, 0.2)
1454 for n in xrange(0, 10):
1455 gcode.addExtrude(50 + n * 10, 150)
1456 gcode.addExtrude(50 + n * 10 + 5, 150)
1457 gcode.addExtrude(50 + n * 10 + 5, 40)
1458 gcode.addExtrude(50 + n * 10 + 10, 40)
1459 gcode.addMove(40, 50)
1460 for n in xrange(0, 10):
1461 gcode.addExtrude(150, 50 + n * 10)
1462 gcode.addExtrude(150, 50 + n * 10 + 5)
1463 gcode.addExtrude(40, 50 + n * 10 + 5)
1464 gcode.addExtrude(40, 50 + n * 10 + 10)
1465 gcode.addRetract(15)
1468 gcode.addMove(50 - x, 30 - y, 0.2)
1470 for n in xrange(0, 10):
1471 gcode.addExtrude(50 + n * 10.2 - 1.0 - x, 140 - y)
1472 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 140 - y)
1473 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 30 - y)
1474 gcode.addExtrude(50 + n * 10.2 - 1.0 + 10 - x, 30 - y)
1475 gcode.addMove(30 - x, 50 - y, 0.2)
1476 for n in xrange(0, 10):
1477 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 - y)
1478 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1479 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1480 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 10 - y)
1481 gcode.addRetract(15)
1483 gcode.addCmd('M400')
1484 gcode.addCmd('M104 T0 S0')
1485 gcode.addCmd('M104 T1 S0')
1486 self.comm.printGCode(gcode.list())
1487 elif self._wizardState == 7:
1489 n = int(self.textEntry.GetValue()) - 1
1492 x = profile.getMachineSettingFloat('extruder_offset_x1')
1494 profile.putPreference('extruder_offset_x1', '%0.2f' % (x))
1495 self.infoBox.SetAttention(_('Which horizontal line number lays perfect on top of each other? Front most line is zero.'))
1496 self.textEntry.SetValue('10')
1497 self._wizardState = 8
1498 elif self._wizardState == 8:
1500 n = int(self.textEntry.GetValue()) - 1
1503 y = profile.getMachineSettingFloat('extruder_offset_y1')
1505 profile.putPreference('extruder_offset_y1', '%0.2f' % (y))
1506 self.infoBox.SetInfo(_('Calibration finished. Offsets are: %s %s') % (profile.getMachineSettingFloat('extruder_offset_x1'), profile.getMachineSettingFloat('extruder_offset_y1')))
1507 self.infoBox.SetReadyIndicator()
1508 self._wizardState = 8
1510 self.resumeButton.Enable(False)
1512 def mcLog(self, message):
1513 print 'Log:', message
1515 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1516 if self._wizardState == 1:
1517 if temp[0] >= 210 and temp[1] >= 210:
1518 self._wizardState = 2
1519 wx.CallAfter(self.infoBox.SetAttention, _('Please load both extruders with PLA.'))
1520 wx.CallAfter(self.resumeButton.Enable, True)
1521 wx.CallAfter(self.resumeButton.SetFocus)
1523 def mcStateChange(self, state):
1524 if self.comm is None:
1526 if self.comm.isOperational():
1527 if self._wizardState == 0:
1528 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer and heating up both extruders.'))
1529 self.comm.sendCommand('M105')
1530 self.comm.sendCommand('M104 S220 T0')
1531 self.comm.sendCommand('M104 S220 T1')
1532 self.comm.sendCommand('G28')
1533 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1534 self._wizardState = 1
1535 if not self.comm.isPrinting():
1536 if self._wizardState == 3:
1537 self._wizardState = 4
1538 wx.CallAfter(self.infoBox.SetAttention, _('Please measure the distance between the vertical lines in millimeters.'))
1539 wx.CallAfter(self.textEntry.SetValue, '0.0')
1540 wx.CallAfter(self.textEntry.Enable, True)
1541 wx.CallAfter(self.resumeButton.Enable, True)
1542 wx.CallAfter(self.resumeButton.SetFocus)
1543 elif self._wizardState == 6:
1544 self._wizardState = 7
1545 wx.CallAfter(self.infoBox.SetAttention, _('Which vertical line number lays perfect on top of each other? Leftmost line is zero.'))
1546 wx.CallAfter(self.textEntry.SetValue, '10')
1547 wx.CallAfter(self.textEntry.Enable, True)
1548 wx.CallAfter(self.resumeButton.Enable, True)
1549 wx.CallAfter(self.resumeButton.SetFocus)
1551 elif self.comm.isError():
1552 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1554 def mcMessage(self, message):
1557 def mcProgress(self, lineNr):
1560 def mcZChange(self, newZ):
1563 class bedLevelWizard(wx.wizard.Wizard):
1565 super(bedLevelWizard, self).__init__(None, -1, _("Bed leveling wizard"))
1567 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1568 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1570 self.mainPage = bedLevelWizardMain(self)
1571 self.headOffsetCalibration = None
1573 self.FitToPage(self.mainPage)
1574 self.GetPageAreaSizer().Add(self.mainPage)
1576 self.RunWizard(self.mainPage)
1579 def OnPageChanging(self, e):
1580 e.GetPage().StoreData()
1582 def OnPageChanged(self, e):
1583 if e.GetPage().AllowNext():
1584 self.FindWindowById(wx.ID_FORWARD).Enable()
1586 self.FindWindowById(wx.ID_FORWARD).Disable()
1587 if e.GetPage().AllowBack():
1588 self.FindWindowById(wx.ID_BACKWARD).Enable()
1590 self.FindWindowById(wx.ID_BACKWARD).Disable()
1592 class headOffsetWizard(wx.wizard.Wizard):
1594 super(headOffsetWizard, self).__init__(None, -1, _("Head offset wizard"))
1596 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1597 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1599 self.mainPage = headOffsetCalibrationPage(self)
1601 self.FitToPage(self.mainPage)
1602 self.GetPageAreaSizer().Add(self.mainPage)
1604 self.RunWizard(self.mainPage)
1607 def OnPageChanging(self, e):
1608 e.GetPage().StoreData()
1610 def OnPageChanged(self, e):
1611 if e.GetPage().AllowNext():
1612 self.FindWindowById(wx.ID_FORWARD).Enable()
1614 self.FindWindowById(wx.ID_FORWARD).Disable()
1615 if e.GetPage().AllowBack():
1616 self.FindWindowById(wx.ID_BACKWARD).Enable()
1618 self.FindWindowById(wx.ID_BACKWARD).Disable()