1 __copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
12 from Cura.gui import firmwareInstall
13 from Cura.gui import printWindow
14 from Cura.util import machineCom
15 from Cura.util import profile
16 from Cura.util import gcodeGenerator
17 from Cura.util import resources
18 from Cura.util import version
21 class InfoBox(wx.Panel):
22 def __init__(self, parent):
23 super(InfoBox, self).__init__(parent)
24 self.SetBackgroundColour('#FFFF80')
26 self.sizer = wx.GridBagSizer(5, 5)
27 self.SetSizer(self.sizer)
29 self.attentionBitmap = wx.Bitmap(resources.getPathForImage('attention.png'))
30 self.errorBitmap = wx.Bitmap(resources.getPathForImage('error.png'))
31 self.readyBitmap = wx.Bitmap(resources.getPathForImage('ready.png'))
33 wx.Bitmap(resources.getPathForImage('busy-0.png')),
34 wx.Bitmap(resources.getPathForImage('busy-1.png')),
35 wx.Bitmap(resources.getPathForImage('busy-2.png')),
36 wx.Bitmap(resources.getPathForImage('busy-3.png'))
39 self.bitmap = wx.StaticBitmap(self, -1, wx.EmptyBitmapRGBA(24, 24, red=255, green=255, blue=255, alpha=1))
40 self.text = wx.StaticText(self, -1, '')
41 self.extraInfoButton = wx.Button(self, -1, 'i', style=wx.BU_EXACTFIT)
42 self.sizer.Add(self.bitmap, pos=(0, 0), flag=wx.ALL, border=5)
43 self.sizer.Add(self.text, pos=(0, 1), flag=wx.TOP | wx.BOTTOM | wx.ALIGN_CENTER_VERTICAL, border=5)
44 self.sizer.Add(self.extraInfoButton, pos=(0,2), flag=wx.ALL|wx.ALIGN_RIGHT|wx.ALIGN_CENTER_VERTICAL, border=5)
45 self.sizer.AddGrowableCol(1)
47 self.extraInfoButton.Show(False)
49 self.extraInfoUrl = ''
51 self.timer = wx.Timer(self)
52 self.Bind(wx.EVT_TIMER, self.doBusyUpdate, self.timer)
53 self.Bind(wx.EVT_BUTTON, self.doExtraInfo, self.extraInfoButton)
56 def SetInfo(self, info):
57 self.SetBackgroundColour('#FFFF80')
58 self.text.SetLabel(info)
59 self.extraInfoButton.Show(False)
62 def SetError(self, info, extraInfoUrl):
63 self.extraInfoUrl = extraInfoUrl
64 self.SetBackgroundColour('#FF8080')
65 self.text.SetLabel(info)
67 self.extraInfoButton.Show(True)
69 self.SetErrorIndicator()
72 def SetAttention(self, info):
73 self.SetBackgroundColour('#FFFF80')
74 self.text.SetLabel(info)
75 self.extraInfoButton.Show(False)
76 self.SetAttentionIndicator()
80 def SetBusy(self, info):
82 self.SetBusyIndicator()
84 def SetBusyIndicator(self):
86 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
88 def doExtraInfo(self, e):
89 webbrowser.open(self.extraInfoUrl)
91 def doBusyUpdate(self, e):
92 if self.busyState is None:
95 if self.busyState >= len(self.busyBitmap):
97 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
99 def SetReadyIndicator(self):
100 self.busyState = None
101 self.bitmap.SetBitmap(self.readyBitmap)
103 def SetErrorIndicator(self):
104 self.busyState = None
105 self.bitmap.SetBitmap(self.errorBitmap)
107 def SetAttentionIndicator(self):
108 self.busyState = None
109 self.bitmap.SetBitmap(self.attentionBitmap)
111 class ImageButton(wx.Panel):
112 DefaultOverlay = wx.Bitmap(resources.getPathForImage('ImageButton_Overlay.png'))
115 __last_group__ = None
116 def __init__(self, parent, label, bitmap, extra_label=None, overlay=DefaultOverlay, style=None):
117 super(ImageButton, self).__init__(parent)
119 if style is ImageButton.IB_GROUP:
120 ImageButton.__last_group__ = self
121 ImageButton.__groups__[self] = [self]
124 if ImageButton.__last_group__:
125 ImageButton.__groups__[ImageButton.__last_group__].append(self)
126 self.group = ImageButton.__last_group__
129 self.sizer = wx.StaticBoxSizer(wx.StaticBox(self), wx.VERTICAL)
130 self.SetSizer(self.sizer)
132 self.original_overlay = overlay
133 self.overlay = self.createOverlay(bitmap, overlay)
134 self.text = wx.StaticText(self, -1, label)
135 self.bmp = wx.StaticBitmap(self, -1, self.bitmap)
137 self.extra_text = wx.StaticText(self, -1, extra_label)
139 self.extra_text = None
140 self.selected = False
143 self.sizer.Add(self.text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
144 self.sizer.Add(self.bmp, 1, flag=wx.ALL|wx.ALIGN_CENTER|wx.EXPAND, border=5)
146 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
147 self.bmp.Bind(wx.EVT_LEFT_UP, self.OnLeftClick)
151 ImageButton.__groups__[self.group].remove(self)
152 if self == self.group:
153 for ib in ImageButton.__groups__[self.group]:
155 del ImageButton.__groups__[self.group]
156 if ImageButton.__last_group__ == self:
157 ImageButton.__last_group__ = None
159 def OnLeftClick(self, e):
165 def SetValue(self, value):
166 old_value = self.selected
167 self.selected = bool(value)
168 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
169 if self.selected and self.group:
170 for ib in ImageButton.__groups__[self.group]:
175 if self.callback and not old_value and self.selected:
178 def SetLabel(self, label):
179 self.text.SetLabel(label)
182 def SetExtraLabel(self, label):
184 self.extra_text.SetLabel(label)
186 self.extra_text = wx.StaticText(self, -1, label)
187 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
190 def SetBitmap(self, bitmap):
192 self.overlay = self.createOverlay(bitmap, self.original_overlay)
193 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
196 def SetOverlay(self, overlay):
197 self.original_overlay = overlay
198 self.overlay = self.createOverlay(self.bitmap, self.original_overlay)
199 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
202 def OnSelected(self, callback):
203 self.callback = callback
205 def createOverlay(self, bitmap, overlay):
206 result = bitmap.GetSubBitmap(wx.Rect(0, 0, *bitmap.Size))
207 (width, height) = bitmap.GetSize()
208 overlay_image = wx.ImageFromBitmap(overlay)
209 overlay_image = overlay_image.Scale(width, height, wx.IMAGE_QUALITY_HIGH)
210 overlay_scaled = wx.BitmapFromImage(overlay_image)
212 dc.SelectObject(result)
213 dc.DrawBitmap(overlay_scaled, 0, 0)
214 dc.SelectObject(wx.NullBitmap)
218 class InfoPage(wx.wizard.WizardPageSimple):
219 def __init__(self, parent, title):
220 wx.wizard.WizardPageSimple.__init__(self, parent)
222 parent.GetPageAreaSizer().Add(self)
223 sizer = wx.GridBagSizer(5, 5)
227 self.title = wx.StaticText(self, -1, title)
228 font = wx.Font(18, wx.SWISS, wx.NORMAL, wx.BOLD)
229 self.title.SetFont(font)
230 # HACK ALERT: For some reason, the StaticText keeps its same size as if
231 # the font was not modified, this causes the text to wrap and to
232 # get out of bounds of the widgets area and hide other widgets.
233 # The only way I found for the widget to get its right size was to calculate
234 # the new font's extent and set the min size on the widget
235 self.title.SetMinSize(self.GetTextExtent(font, title))
236 sizer.Add(self.title, pos=(0, 0), span=(1, 2), flag=wx.ALIGN_CENTRE | wx.ALL)
237 sizer.Add(wx.StaticLine(self, -1), pos=(1, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
238 sizer.AddGrowableCol(1)
242 def GetTextExtent(self, font, text):
245 w,h = dc.GetTextExtent(text)
248 def AddText(self, info):
249 text = wx.StaticText(self, -1, info)
250 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
254 def AddSeperator(self):
255 self.GetSizer().Add(wx.StaticLine(self, -1), pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
258 def AddHiddenSeperator(self):
261 def AddInfoBox(self):
262 infoBox = InfoBox(self)
263 self.GetSizer().Add(infoBox, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
267 def AddRadioButton(self, label, style=0):
268 radio = wx.RadioButton(self, -1, label, style=style)
269 self.GetSizer().Add(radio, pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
273 def AddCheckbox(self, label, checked=False):
274 check = wx.CheckBox(self, -1)
275 text = wx.StaticText(self, -1, label)
276 check.SetValue(checked)
277 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
278 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 2), flag=wx.ALL)
282 def AddButton(self, label):
283 button = wx.Button(self, -1, label)
284 self.GetSizer().Add(button, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
288 def AddDualButton(self, label1, label2):
289 button1 = wx.Button(self, -1, label1)
290 self.GetSizer().Add(button1, pos=(self.rowNr, 0), flag=wx.RIGHT)
291 button2 = wx.Button(self, -1, label2)
292 self.GetSizer().Add(button2, pos=(self.rowNr, 1))
294 return button1, button2
296 def AddTextCtrl(self, value):
297 ret = wx.TextCtrl(self, -1, value)
298 self.GetSizer().Add(ret, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
302 def AddLabelTextCtrl(self, info, value):
303 text = wx.StaticText(self, -1, info)
304 ret = wx.TextCtrl(self, -1, value)
305 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
306 self.GetSizer().Add(ret, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
310 def AddTextCtrlButton(self, value, buttonText):
311 text = wx.TextCtrl(self, -1, value)
312 button = wx.Button(self, -1, buttonText)
313 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
314 self.GetSizer().Add(button, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
318 def AddBitmap(self, bitmap):
319 bitmap = wx.StaticBitmap(self, -1, bitmap)
320 self.GetSizer().Add(bitmap, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
325 panel = wx.Panel(self, -1)
326 sizer = wx.GridBagSizer(2, 2)
327 panel.SetSizer(sizer)
328 self.GetSizer().Add(panel, pos=(self.rowNr, 0), span=(1, 2), flag=wx.ALL | wx.EXPAND)
332 def AddCheckmark(self, label, bitmap):
333 check = wx.StaticBitmap(self, -1, bitmap)
334 text = wx.StaticText(self, -1, label)
335 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
336 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 1), flag=wx.ALL)
340 def AddCombo(self, label, options):
341 combo = wx.ComboBox(self, -1, options[0], choices=options, style=wx.CB_DROPDOWN|wx.CB_READONLY)
342 text = wx.StaticText(self, -1, label)
343 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.ALIGN_CENTER)
344 self.GetSizer().Add(combo, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
348 def AddImageButton(self, panel, x, y, label, filename, image_size=None,
349 extra_label=None, overlay=ImageButton.DefaultOverlay, style=None):
350 ib = ImageButton(panel, label, self.GetBitmap(filename, image_size), extra_label, overlay, style)
351 panel.GetSizer().Add(ib, pos=(x, y), flag=wx.LEFT | wx.RIGHT | wx.BOTTOM, border=10)
354 def GetBitmap(self, filename, image_size):
355 if image_size == None:
356 return wx.Bitmap(resources.getPathForImage(filename))
358 image = wx.Image(resources.getPathForImage(filename))
359 image_scaled = image.Scale(image_size[0], image_size[1], wx.IMAGE_QUALITY_HIGH)
360 return wx.BitmapFromImage(image_scaled)
371 class PrintrbotPage(InfoPage):
372 def __init__(self, parent):
373 self._printer_info = [
374 # X, Y, Z, Nozzle Size, Filament Diameter, PrintTemperature, Print Speed, Travel Speed, Retract speed, Retract amount, use bed level sensor
375 ("Simple Metal", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, True),
376 ("Metal Plus", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
377 ("Simple Makers Kit", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, True),
378 (":" + _("Older models"),),
379 ("Original", 130, 130, 130, 0.5, 2.95, 208, 40, 70, 30, 1, False),
380 ("Simple Maker's Edition v1", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
381 ("Simple Maker's Edition v2 (2013 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
382 ("Simple Maker's Edition v3 (2014 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
383 ("Jr v1", 115, 120, 80, 0.4, 1.75, 208, 40, 70, 30, 1, False),
384 ("Jr v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
385 ("LC v1", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
386 ("LC v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
387 ("Plus v1", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
388 ("Plus v2", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
389 ("Plus v2.1", 185, 220, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
390 ("Plus v2.2 (Model 1404/140422/140501/140507)", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
391 ("Go v2 Large", 505, 306, 310, 0.4, 1.75, 208, 35, 70, 30, 1, True),
394 super(PrintrbotPage, self).__init__(parent, _("Printrbot Selection"))
395 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Printrbot_logo.png')))
396 self.AddText(_("Select which Printrbot machine you have:"))
398 for printer in self._printer_info:
399 if printer[0].startswith(":"):
401 self.AddText(printer[0][1:])
403 item = self.AddRadioButton(printer[0])
404 item.data = printer[1:]
405 self._items.append(item)
408 profile.putMachineSetting('machine_name', 'Printrbot ???')
409 for item in self._items:
412 profile.putMachineSetting('machine_name', 'Printrbot ' + item.GetLabel())
413 profile.putMachineSetting('machine_width', data[0])
414 profile.putMachineSetting('machine_depth', data[1])
415 profile.putMachineSetting('machine_height', data[2])
416 profile.putProfileSetting('nozzle_size', data[3])
417 profile.putProfileSetting('filament_diameter', data[4])
418 profile.putProfileSetting('print_temperature', data[5])
419 profile.putProfileSetting('print_speed', data[6])
420 profile.putProfileSetting('travel_speed', data[7])
421 profile.putProfileSetting('retraction_speed', data[8])
422 profile.putProfileSetting('retraction_amount', data[9])
423 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
424 profile.putMachineSetting('has_heated_bed', 'False')
425 profile.putMachineSetting('machine_center_is_zero', 'False')
426 profile.putMachineSetting('extruder_head_size_min_x', '0')
427 profile.putMachineSetting('extruder_head_size_min_y', '0')
428 profile.putMachineSetting('extruder_head_size_max_x', '0')
429 profile.putMachineSetting('extruder_head_size_max_y', '0')
430 profile.putMachineSetting('extruder_head_size_height', '0')
432 profile.setAlterationFile('start.gcode', """;Sliced at: {day} {date} {time}
433 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
434 ;Print time: {print_time}
435 ;Filament used: {filament_amount}m {filament_weight}g
436 ;Filament cost: {filament_cost}
437 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
438 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
440 G90 ;absolute positioning
441 M82 ;set extruder to absolute mode
442 M107 ;start with the fan off
443 G28 X0 Y0 ;move X/Y to min endstops
444 G28 Z0 ;move Z to min endstops
445 G29 ;Run the auto bed leveling
446 G1 Z15.0 F{travel_speed} ;move the platform down 15mm
447 G92 E0 ;zero the extruded length
448 G1 F200 E3 ;extrude 3mm of feed stock
449 G92 E0 ;zero the extruded length again
451 ;Put printing message on LCD screen
455 class OtherMachineSelectPage(InfoPage):
456 def __init__(self, parent):
457 super(OtherMachineSelectPage, self).__init__(parent, _("Other machine information"))
458 self.AddText(_("The following pre-defined machine profiles are available"))
459 self.AddText(_("Note that these profiles are not guaranteed to give good results,\nor work at all. Extra tweaks might be required.\nIf you find issues with the predefined profiles,\nor want an extra profile.\nPlease report it at the github issue tracker."))
461 machines = resources.getDefaultMachineProfiles()
463 for filename in machines:
464 name = os.path.splitext(os.path.basename(filename))[0]
465 item = self.AddRadioButton(name)
466 item.filename = filename
467 item.Bind(wx.EVT_RADIOBUTTON, self.OnProfileSelect)
468 self.options.append(item)
470 item = self.AddRadioButton(_('Custom...'))
472 item.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
474 def OnProfileSelect(self, e):
475 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineInfoPage)
477 def OnOtherSelect(self, e):
478 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().customRepRapInfoPage)
481 for option in self.options:
482 if option.GetValue():
483 profile.loadProfile(option.filename)
484 profile.loadMachineSettings(option.filename)
486 class OtherMachineInfoPage(InfoPage):
487 def __init__(self, parent):
488 super(OtherMachineInfoPage, self).__init__(parent, _("Cura Ready!"))
489 self.AddText(_("Cura is now ready to be used!"))
491 class CustomRepRapInfoPage(InfoPage):
492 def __init__(self, parent):
493 super(CustomRepRapInfoPage, self).__init__(parent, _("Custom RepRap information"))
494 self.AddText(_("RepRap machines can be vastly different, so here you can set your own settings."))
495 self.AddText(_("Be sure to review the default profile before running it on your machine."))
496 self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
498 self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
500 self.machineName = self.AddLabelTextCtrl(_("Machine name"), "RepRap")
501 self.machineWidth = self.AddLabelTextCtrl(_("Machine width X (mm)"), "80")
502 self.machineDepth = self.AddLabelTextCtrl(_("Machine depth Y (mm)"), "80")
503 self.machineHeight = self.AddLabelTextCtrl(_("Machine height Z (mm)"), "55")
504 self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
505 self.heatedBed = self.AddCheckbox(_("Heated bed"))
506 self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
509 profile.putMachineSetting('machine_name', self.machineName.GetValue())
510 profile.putMachineSetting('machine_width', self.machineWidth.GetValue())
511 profile.putMachineSetting('machine_depth', self.machineDepth.GetValue())
512 profile.putMachineSetting('machine_height', self.machineHeight.GetValue())
513 profile.putProfileSetting('nozzle_size', self.nozzleSize.GetValue())
514 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
515 profile.putMachineSetting('has_heated_bed', str(self.heatedBed.GetValue()))
516 profile.putMachineSetting('machine_center_is_zero', str(self.HomeAtCenter.GetValue()))
517 profile.putMachineSetting('extruder_head_size_min_x', '0')
518 profile.putMachineSetting('extruder_head_size_min_y', '0')
519 profile.putMachineSetting('extruder_head_size_max_x', '0')
520 profile.putMachineSetting('extruder_head_size_max_y', '0')
521 profile.putMachineSetting('extruder_head_size_height', '0')
522 profile.checkAndUpdateMachineName()
524 class MachineSelectPage(InfoPage):
525 def __init__(self, parent):
526 super(MachineSelectPage, self).__init__(parent, _("Select your machine"))
527 self.AddText(_("What kind of machine do you have:"))
529 self.Ultimaker2Radio = self.AddRadioButton("Ultimaker2")
530 self.Ultimaker2Radio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
531 self.Ultimaker2ExtRadio = self.AddRadioButton("Ultimaker2extended")
532 self.Ultimaker2ExtRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
533 self.Ultimaker2GoRadio = self.AddRadioButton("Ultimaker2go")
534 self.Ultimaker2GoRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
535 self.UltimakerRadio = self.AddRadioButton("Ultimaker Original")
536 self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
537 self.UltimakerOPRadio = self.AddRadioButton("Ultimaker Original+")
538 self.UltimakerOPRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerOPSelect)
539 self.PrintrbotRadio = self.AddRadioButton("Printrbot")
540 self.PrintrbotRadio.Bind(wx.EVT_RADIOBUTTON, self.OnPrintrbotSelect)
541 self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap, MakerBot, Witbox)"))
542 self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
544 def OnUltimaker2Select(self, e):
545 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimaker2ReadyPage)
547 def OnUltimakerSelect(self, e):
548 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerSelectParts)
550 def OnUltimakerOPSelect(self, e):
551 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerFirmwareUpgradePage)
553 def OnPrintrbotSelect(self, e):
554 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().printrbotSelectType)
556 def OnOtherSelect(self, e):
557 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
560 profile.putProfileSetting('retraction_enable', 'True')
561 if self.Ultimaker2Radio.GetValue() or self.Ultimaker2GoRadio.GetValue() or self.Ultimaker2ExtRadio.GetValue():
562 if self.Ultimaker2Radio.GetValue():
563 profile.putMachineSetting('machine_width', '230')
564 profile.putMachineSetting('machine_depth', '225')
565 profile.putMachineSetting('machine_height', '205')
566 profile.putMachineSetting('machine_name', 'ultimaker2')
567 profile.putMachineSetting('machine_type', 'ultimaker2')
568 profile.putMachineSetting('has_heated_bed', 'True')
569 if self.Ultimaker2GoRadio.GetValue():
570 profile.putMachineSetting('machine_width', '120')
571 profile.putMachineSetting('machine_depth', '120')
572 profile.putMachineSetting('machine_height', '115')
573 profile.putMachineSetting('machine_name', 'ultimaker2go')
574 profile.putMachineSetting('machine_type', 'ultimaker2go')
575 profile.putMachineSetting('has_heated_bed', 'False')
576 if self.Ultimaker2ExtRadio.GetValue():
577 profile.putMachineSetting('machine_width', '230')
578 profile.putMachineSetting('machine_depth', '225')
579 profile.putMachineSetting('machine_height', '315')
580 profile.putMachineSetting('machine_name', 'ultimaker2extended')
581 profile.putMachineSetting('machine_type', 'ultimaker2extended')
582 profile.putMachineSetting('has_heated_bed', 'False')
583 profile.putMachineSetting('machine_center_is_zero', 'False')
584 profile.putMachineSetting('gcode_flavor', 'UltiGCode')
585 profile.putMachineSetting('extruder_head_size_min_x', '40.0')
586 profile.putMachineSetting('extruder_head_size_min_y', '10.0')
587 profile.putMachineSetting('extruder_head_size_max_x', '60.0')
588 profile.putMachineSetting('extruder_head_size_max_y', '30.0')
589 profile.putMachineSetting('extruder_head_size_height', '48.0')
590 profile.putProfileSetting('nozzle_size', '0.4')
591 profile.putProfileSetting('fan_full_height', '5.0')
592 profile.putMachineSetting('extruder_offset_x1', '18.0')
593 profile.putMachineSetting('extruder_offset_y1', '0.0')
594 elif self.UltimakerRadio.GetValue():
595 profile.putMachineSetting('machine_width', '205')
596 profile.putMachineSetting('machine_depth', '205')
597 profile.putMachineSetting('machine_height', '200')
598 profile.putMachineSetting('machine_name', 'ultimaker original')
599 profile.putMachineSetting('machine_type', 'ultimaker')
600 profile.putMachineSetting('machine_center_is_zero', 'False')
601 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
602 profile.putProfileSetting('nozzle_size', '0.4')
603 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
604 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
605 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
606 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
607 profile.putMachineSetting('extruder_head_size_height', '55.0')
608 elif self.UltimakerOPRadio.GetValue():
609 profile.putMachineSetting('machine_width', '205')
610 profile.putMachineSetting('machine_depth', '205')
611 profile.putMachineSetting('machine_height', '200')
612 profile.putMachineSetting('machine_name', 'ultimaker original+')
613 profile.putMachineSetting('machine_type', 'ultimaker_plus')
614 profile.putMachineSetting('machine_center_is_zero', 'False')
615 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
616 profile.putProfileSetting('nozzle_size', '0.4')
617 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
618 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
619 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
620 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
621 profile.putMachineSetting('extruder_head_size_height', '55.0')
622 profile.putMachineSetting('has_heated_bed', 'True')
623 profile.putMachineSetting('extruder_amount', '1')
624 profile.putProfileSetting('retraction_enable', 'True')
626 profile.putMachineSetting('machine_width', '80')
627 profile.putMachineSetting('machine_depth', '80')
628 profile.putMachineSetting('machine_height', '60')
629 profile.putMachineSetting('machine_name', 'reprap')
630 profile.putMachineSetting('machine_type', 'reprap')
631 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
632 profile.putPreference('startMode', 'Normal')
633 profile.putProfileSetting('nozzle_size', '0.5')
634 profile.checkAndUpdateMachineName()
635 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
637 class SelectParts(InfoPage):
638 def __init__(self, parent):
639 super(SelectParts, self).__init__(parent, _("Select upgraded parts you have"))
640 self.AddText(_("To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine."))
642 self.springExtruder = self.AddCheckbox(_("Extruder drive upgrade"))
643 self.heatedBedKit = self.AddCheckbox(_("Heated printer bed (kit)"))
644 self.heatedBed = self.AddCheckbox(_("Heated printer bed (self built)"))
645 self.dualExtrusion = self.AddCheckbox(_("Dual extrusion (experimental)"))
647 self.AddText(_("If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability."))
648 self.AddText(_("This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094"))
649 self.springExtruder.SetValue(True)
652 profile.putMachineSetting('ultimaker_extruder_upgrade', str(self.springExtruder.GetValue()))
653 if self.heatedBed.GetValue() or self.heatedBedKit.GetValue():
654 profile.putMachineSetting('has_heated_bed', 'True')
656 profile.putMachineSetting('has_heated_bed', 'False')
657 if self.dualExtrusion.GetValue():
658 profile.putMachineSetting('extruder_amount', '2')
659 profile.putMachineSetting('machine_depth', '195')
661 profile.putMachineSetting('extruder_amount', '1')
662 if profile.getMachineSetting('ultimaker_extruder_upgrade') == 'True':
663 profile.putProfileSetting('retraction_enable', 'True')
665 profile.putProfileSetting('retraction_enable', 'False')
668 class UltimakerFirmwareUpgradePage(InfoPage):
669 def __init__(self, parent):
670 super(UltimakerFirmwareUpgradePage, self).__init__(parent, _("Upgrade Ultimaker Firmware"))
671 self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the stepper motors, regulates the temperature\nand ultimately makes your printer work."))
672 self.AddHiddenSeperator()
673 self.AddText(_("The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier."))
674 self.AddHiddenSeperator()
675 self.AddText(_("Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now."))
676 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Upgrade to Marlin firmware'), _('Skip upgrade'))
677 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
678 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
679 self.AddHiddenSeperator()
680 if profile.getMachineSetting('machine_type') == 'ultimaker':
681 self.AddText(_("Do not upgrade to this firmware if:"))
682 self.AddText(_("* You have an older machine based on ATMega1280 (Rev 1 machine)"))
683 self.AddText(_("* Build your own heated bed"))
684 self.AddText(_("* Have other changes in the firmware"))
685 # button = self.AddButton('Goto this page for a custom firmware')
686 # button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
691 def OnUpgradeClick(self, e):
692 if firmwareInstall.InstallFirmware():
693 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
695 def OnSkipClick(self, e):
696 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
697 self.GetParent().ShowPage(self.GetNext())
699 def OnUrlClick(self, e):
700 webbrowser.open('http://marlinbuilder.robotfuzz.com/')
702 class UltimakerCheckupPage(InfoPage):
703 def __init__(self, parent):
704 super(UltimakerCheckupPage, self).__init__(parent, _("Ultimaker Checkup"))
706 self.checkBitmap = wx.Bitmap(resources.getPathForImage('checkmark.png'))
707 self.crossBitmap = wx.Bitmap(resources.getPathForImage('cross.png'))
708 self.unknownBitmap = wx.Bitmap(resources.getPathForImage('question.png'))
709 self.endStopNoneBitmap = wx.Bitmap(resources.getPathForImage('endstop_none.png'))
710 self.endStopXMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmin.png'))
711 self.endStopXMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmax.png'))
712 self.endStopYMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymin.png'))
713 self.endStopYMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymax.png'))
714 self.endStopZMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmin.png'))
715 self.endStopZMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmax.png'))
718 _("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
719 b1, b2 = self.AddDualButton(_("Run checks"), _("Skip checks"))
720 b1.Bind(wx.EVT_BUTTON, self.OnCheckClick)
721 b2.Bind(wx.EVT_BUTTON, self.OnSkipClick)
723 self.commState = self.AddCheckmark(_("Communication:"), self.unknownBitmap)
724 self.tempState = self.AddCheckmark(_("Temperature:"), self.unknownBitmap)
725 self.stopState = self.AddCheckmark(_("Endstops:"), self.unknownBitmap)
727 self.infoBox = self.AddInfoBox()
728 self.machineState = self.AddText("")
729 self.temperatureLabel = self.AddText("")
730 self.errorLogButton = self.AddButton(_("Show error log"))
731 self.errorLogButton.Show(False)
733 self.endstopBitmap = self.AddBitmap(self.endStopNoneBitmap)
735 self.xMinStop = False
736 self.xMaxStop = False
737 self.yMinStop = False
738 self.yMaxStop = False
739 self.zMinStop = False
740 self.zMaxStop = False
742 self.Bind(wx.EVT_BUTTON, self.OnErrorLog, self.errorLogButton)
745 if self.comm is not None:
749 self.endstopBitmap.Show(False)
752 def OnSkipClick(self, e):
753 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
754 self.GetParent().ShowPage(self.GetNext())
756 def OnCheckClick(self, e=None):
757 self.errorLogButton.Show(False)
758 if self.comm is not None:
762 wx.CallAfter(self.OnCheckClick)
764 self.infoBox.SetBusy(_("Connecting to machine."))
765 self.commState.SetBitmap(self.unknownBitmap)
766 self.tempState.SetBitmap(self.unknownBitmap)
767 self.stopState.SetBitmap(self.unknownBitmap)
768 self.checkupState = 0
769 self.checkExtruderNr = 0
770 self.comm = machineCom.MachineCom(callbackObject=self)
772 def OnErrorLog(self, e):
773 printWindow.LogWindow('\n'.join(self.comm.getLog()))
775 def mcLog(self, message):
778 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
779 if not self.comm.isOperational():
781 if self.checkupState == 0:
782 self.tempCheckTimeout = 20
783 if temp[self.checkExtruderNr] > 70:
784 self.checkupState = 1
785 wx.CallAfter(self.infoBox.SetInfo, _("Cooldown before temperature check."))
786 self.comm.sendCommand("M104 S0 T%d" % (self.checkExtruderNr))
787 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
789 self.startTemp = temp[self.checkExtruderNr]
790 self.checkupState = 2
791 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
792 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
793 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
794 elif self.checkupState == 1:
795 if temp[self.checkExtruderNr] < 60:
796 self.startTemp = temp[self.checkExtruderNr]
797 self.checkupState = 2
798 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
799 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
800 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
801 elif self.checkupState == 2:
802 #print "WARNING, TEMPERATURE TEST DISABLED FOR TESTING!"
803 if temp[self.checkExtruderNr] > self.startTemp + 40:
804 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
805 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
806 if self.checkExtruderNr < int(profile.getMachineSetting('extruder_amount')):
807 self.checkExtruderNr = 0
808 self.checkupState = 3
809 wx.CallAfter(self.infoBox.SetAttention, _("Please make sure none of the endstops are pressed."))
810 wx.CallAfter(self.endstopBitmap.Show, True)
811 wx.CallAfter(self.Layout)
812 self.comm.sendCommand('M119')
813 wx.CallAfter(self.tempState.SetBitmap, self.checkBitmap)
815 self.checkupState = 0
816 self.checkExtruderNr += 1
818 self.tempCheckTimeout -= 1
819 if self.tempCheckTimeout < 1:
820 self.checkupState = -1
821 wx.CallAfter(self.tempState.SetBitmap, self.crossBitmap)
822 wx.CallAfter(self.infoBox.SetError, _("Temperature measurement FAILED!"), 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
823 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
824 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
825 elif self.checkupState >= 3 and self.checkupState < 10:
826 self.comm.sendCommand('M119')
827 wx.CallAfter(self.temperatureLabel.SetLabel, _("Head temperature: %d") % (temp[self.checkExtruderNr]))
829 def mcStateChange(self, state):
830 if self.comm is None:
832 if self.comm.isOperational():
833 wx.CallAfter(self.commState.SetBitmap, self.checkBitmap)
834 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
835 elif self.comm.isError():
836 wx.CallAfter(self.commState.SetBitmap, self.crossBitmap)
837 wx.CallAfter(self.infoBox.SetError, _("Failed to establish connection with the printer."), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
838 wx.CallAfter(self.endstopBitmap.Show, False)
839 wx.CallAfter(self.machineState.SetLabel, '%s' % (self.comm.getErrorString()))
840 wx.CallAfter(self.errorLogButton.Show, True)
841 wx.CallAfter(self.Layout)
843 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
845 def mcMessage(self, message):
846 if self.checkupState >= 3 and self.checkupState < 10 and ('_min' in message or '_max' in message):
847 for data in message.split(' '):
849 tag, value = data.split(':', 1)
851 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
853 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
855 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
857 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
859 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
861 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
863 tag, value = map(str.strip, message.split(':', 1))
865 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
867 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
869 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
871 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
873 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
875 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
876 if 'z_max' in message:
877 self.comm.sendCommand('M119')
879 if self.checkupState == 3:
880 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
881 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
882 self.checkupState = 5
883 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
884 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
886 self.checkupState = 4
887 wx.CallAfter(self.infoBox.SetAttention, _("Please press the right X endstop."))
888 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMaxBitmap)
889 elif self.checkupState == 4:
890 if not self.xMinStop and self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
891 self.checkupState = 5
892 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
893 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
894 elif self.checkupState == 5:
895 if self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
896 self.checkupState = 6
897 wx.CallAfter(self.infoBox.SetAttention, _("Please press the front Y endstop."))
898 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMinBitmap)
899 elif self.checkupState == 6:
900 if not self.xMinStop and not self.xMaxStop and self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
901 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
902 self.checkupState = 8
903 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
904 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
906 self.checkupState = 7
907 wx.CallAfter(self.infoBox.SetAttention, _("Please press the back Y endstop."))
908 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMaxBitmap)
909 elif self.checkupState == 7:
910 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and self.yMaxStop and not self.zMinStop and not self.zMaxStop:
911 self.checkupState = 8
912 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
913 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
914 elif self.checkupState == 8:
915 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and self.zMinStop and not self.zMaxStop:
916 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
917 self.checkupState = 10
919 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
920 wx.CallAfter(self.infoBox.SetReadyIndicator)
921 wx.CallAfter(self.endstopBitmap.Show, False)
922 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
923 wx.CallAfter(self.OnSkipClick, None)
925 self.checkupState = 9
926 wx.CallAfter(self.infoBox.SetAttention, _("Please press the bottom Z endstop."))
927 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMaxBitmap)
928 elif self.checkupState == 9:
929 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and self.zMaxStop:
930 self.checkupState = 10
932 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
933 wx.CallAfter(self.infoBox.SetReadyIndicator)
934 wx.CallAfter(self.endstopBitmap.Show, False)
935 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
936 wx.CallAfter(self.OnSkipClick, None)
938 def mcProgress(self, lineNr):
941 def mcZChange(self, newZ):
945 class UltimakerCalibrationPage(InfoPage):
946 def __init__(self, parent):
947 super(UltimakerCalibrationPage, self).__init__(parent, _("Ultimaker Calibration"))
949 self.AddText("Your Ultimaker requires some calibration.")
950 self.AddText("This calibration is needed for a proper extrusion amount.")
952 self.AddText("The following values are needed:")
953 self.AddText("* Diameter of filament")
954 self.AddText("* Number of steps per mm of filament extrusion")
956 self.AddText("The better you have calibrated these values, the better your prints\nwill become.")
958 self.AddText("First we need the diameter of your filament:")
959 self.filamentDiameter = self.AddTextCtrl(profile.getProfileSetting('filament_diameter'))
961 "If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.")
962 self.AddText("Note: This value can be changed later at any time.")
965 profile.putProfileSetting('filament_diameter', self.filamentDiameter.GetValue())
968 class UltimakerCalibrateStepsPerEPage(InfoPage):
969 def __init__(self, parent):
970 super(UltimakerCalibrateStepsPerEPage, self).__init__(parent, _("Ultimaker Calibration"))
972 #if profile.getMachineSetting('steps_per_e') == '0':
973 # profile.putMachineSetting('steps_per_e', '865.888')
975 self.AddText(_("Calibrating the Steps Per E requires some manual actions."))
976 self.AddText(_("First remove any filament from your machine."))
977 self.AddText(_("Next put in your filament so the tip is aligned with the\ntop of the extruder drive."))
978 self.AddText(_("We'll push the filament 100mm"))
979 self.extrudeButton = self.AddButton(_("Extrude 100mm filament"))
980 self.AddText(_("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)"))
981 self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton("100", _("Save"))
982 self.AddText(_("This results in the following steps per E:"))
983 self.stepsPerEInput = self.AddTextCtrl(profile.getMachineSetting('steps_per_e'))
984 self.AddText(_("You can repeat these steps to get better calibration."))
987 _("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:"))
988 self.heatButton = self.AddButton(_("Heatup for filament removal"))
990 self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
991 self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
992 self.heatButton.Bind(wx.EVT_BUTTON, self.OnHeatClick)
994 def OnSaveLengthClick(self, e):
995 currentEValue = float(self.stepsPerEInput.GetValue())
996 realExtrudeLength = float(self.lengthInput.GetValue())
997 newEValue = currentEValue * 100 / realExtrudeLength
998 self.stepsPerEInput.SetValue(str(newEValue))
999 self.lengthInput.SetValue("100")
1001 def OnExtrudeClick(self, e):
1002 t = threading.Thread(target=self.OnExtrudeRun)
1006 def OnExtrudeRun(self):
1007 self.heatButton.Enable(False)
1008 self.extrudeButton.Enable(False)
1009 currentEValue = float(self.stepsPerEInput.GetValue())
1010 self.comm = machineCom.MachineCom()
1011 if not self.comm.isOpen():
1013 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1014 'Printer error', wx.OK | wx.ICON_INFORMATION)
1015 self.heatButton.Enable(True)
1016 self.extrudeButton.Enable(True)
1019 line = self.comm.readline()
1024 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1027 self.sendGCommand('M302') #Disable cold extrusion protection
1028 self.sendGCommand("M92 E%f" % (currentEValue))
1029 self.sendGCommand("G92 E0")
1030 self.sendGCommand("G1 E100 F600")
1033 self.extrudeButton.Enable()
1034 self.heatButton.Enable()
1036 def OnHeatClick(self, e):
1037 t = threading.Thread(target=self.OnHeatRun)
1041 def OnHeatRun(self):
1042 self.heatButton.Enable(False)
1043 self.extrudeButton.Enable(False)
1044 self.comm = machineCom.MachineCom()
1045 if not self.comm.isOpen():
1047 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1048 'Printer error', wx.OK | wx.ICON_INFORMATION)
1049 self.heatButton.Enable(True)
1050 self.extrudeButton.Enable(True)
1053 line = self.comm.readline()
1055 self.heatButton.Enable(True)
1056 self.extrudeButton.Enable(True)
1060 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1063 self.sendGCommand('M104 S200') #Set the temperature to 200C, should be enough to get PLA and ABS out.
1065 'Wait till you can remove the filament from the machine, and press OK.\n(Temperature is set to 200C)',
1066 'Machine heatup', wx.OK | wx.ICON_INFORMATION)
1067 self.sendGCommand('M104 S0')
1070 self.heatButton.Enable(True)
1071 self.extrudeButton.Enable(True)
1073 def sendGCommand(self, cmd):
1074 self.comm.sendCommand(cmd) #Disable cold extrusion protection
1076 line = self.comm.readline()
1079 if line.startswith('ok'):
1082 def StoreData(self):
1083 profile.putPreference('steps_per_e', self.stepsPerEInput.GetValue())
1085 class Ultimaker2ReadyPage(InfoPage):
1086 def __init__(self, parent):
1087 super(Ultimaker2ReadyPage, self).__init__(parent, _("Ultimaker2"))
1088 self.AddText(_('Congratulations on your the purchase of your brand new Ultimaker2.'))
1089 self.AddText(_('Cura is now ready to be used with your Ultimaker2.'))
1092 class LulzbotMachineSelectPage(InfoPage):
1096 def __init__(self, parent):
1097 super(LulzbotMachineSelectPage, self).__init__(parent, _("Select your machine"))
1098 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1099 self.AddText(_("Select your printer :"))
1101 self.panel = self.AddPanel()
1103 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1104 self.LulzbotMini = self.AddImageButton(self.panel, 0, 0, _("LulzBot Mini"),
1105 'Lulzbot_mini.jpg', image_size, style=ImageButton.IB_GROUP)
1106 self.LulzbotMini.OnSelected(self.OnLulzbotMiniSelected)
1107 self.LulzbotMini.SetValue(True)
1108 self.LulzbotTaz5 = self.AddImageButton(self.panel, 0, 1, _("LulzBot TAZ 5"),
1109 'Lulzbot_TAZ5.jpg', image_size)
1110 self.LulzbotTaz5.OnSelected(self.OnLulzbotTazSelected)
1111 self.LulzbotTaz4 = self.AddImageButton(self.panel, 1, 0, _("LulzBot TAZ 4"),
1112 'Lulzbot_TAZ4.jpg', image_size)
1113 self.LulzbotTaz4.OnSelected(self.OnLulzbotTazSelected)
1114 self.OtherPrinters = self.AddImageButton(self.panel, 1, 1, _("Other Printers"),
1115 'Generic-3D-Printer.png', image_size)
1116 self.OtherPrinters.OnSelected(self.OnOthersSelected)
1118 def OnOthersSelected(self):
1119 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().machineSelectPage)
1121 def OnLulzbotMiniSelected(self):
1122 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotMiniToolheadPage)
1123 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotMiniToolheadPage,
1124 self.GetParent().lulzbotFirmwarePage)
1126 def OnLulzbotTazSelected(self):
1127 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazHotendPage)
1129 def AllowNext(self):
1132 def AllowBack(self):
1135 def StoreData(self):
1136 if self.LulzbotTaz4.GetValue() or self.LulzbotTaz5.GetValue() or self.LulzbotMini.GetValue():
1137 if self.LulzbotTaz4.GetValue():
1138 # Nozzle diameter will be set in the toolhead selection page
1139 # We set the machine_type here so later pages can differenciate between TAZ 4 and 5
1140 profile.putMachineSetting('machine_width', '290')
1141 profile.putMachineSetting('machine_depth', '275')
1142 profile.putMachineSetting('machine_height', '250')
1143 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4')
1144 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
1145 profile.putMachineSetting('serial_baud', '115200')
1146 elif self.LulzbotTaz5.GetValue():
1147 # Nozzle diameter will be set in the toolhead selection page
1148 # We set the machine_type here so later pages can differenciate between TAZ 4 and 5
1149 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
1150 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5')
1151 profile.putMachineSetting('machine_width', '290')
1152 profile.putMachineSetting('machine_depth', '275')
1153 profile.putMachineSetting('machine_height', '250')
1154 profile.putMachineSetting('serial_baud', '115200')
1156 # Nozzle diameter and machine type will be set in the toolhead selection page
1157 profile.putMachineSetting('machine_name', 'LulzBot Mini')
1158 profile.putMachineSetting('machine_width', '155')
1159 profile.putMachineSetting('machine_depth', '155')
1160 profile.putMachineSetting('machine_height', '163')
1161 profile.putMachineSetting('serial_baud', '115200')
1162 profile.putMachineSetting('extruder_head_size_min_x', '40')
1163 profile.putMachineSetting('extruder_head_size_max_x', '75')
1164 profile.putMachineSetting('extruder_head_size_min_y', '25')
1165 profile.putMachineSetting('extruder_head_size_max_y', '55')
1166 profile.putMachineSetting('extruder_head_size_height', '17')
1168 profile.putMachineSetting('machine_center_is_zero', 'False')
1169 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
1170 profile.putMachineSetting('has_heated_bed', 'True')
1171 profile.putMachineSetting('extruder_head_size_min_x', '0.0')
1172 profile.putMachineSetting('extruder_head_size_min_y', '0.0')
1173 profile.putMachineSetting('extruder_head_size_max_x', '0.0')
1174 profile.putMachineSetting('extruder_head_size_max_y', '0.0')
1175 profile.putMachineSetting('extruder_head_size_height', '0.0')
1176 profile.putProfileSetting('retraction_enable', 'True')
1177 profile.putPreference('startMode', 'Simple')
1178 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
1179 profile.checkAndUpdateMachineName()
1181 class LulzbotReadyPage(InfoPage):
1182 def __init__(self, parent):
1183 super(LulzbotReadyPage, self).__init__(parent, _("LulzBot TAZ/Mini"))
1184 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1185 self.AddText(_('Cura is now ready to be used with your LulzBot 3D printer.'))
1187 self.AddText(_('For more information about using Cura with your LulzBot'))
1188 self.AddText(_('3D printer, please visit www.LulzBot.com/cura'))
1191 class LulzbotToolheadSelectPage(InfoPage):
1192 def __init__(self, parent, title):
1193 super(LulzbotToolheadSelectPage, self).__init__(parent, title)
1194 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1195 txt = self.AddText(_('Picking the correct Tool Head is important.'))
1196 txt = self.AddText(_('WARNING: Printing with the incorrect firmware can damage your LulzBot printer!'))
1197 txt.SetForegroundColour(wx.RED)
1200 class LulzbotMiniToolheadSelectPage(LulzbotToolheadSelectPage):
1201 def __init__(self, parent, allowBack = True):
1202 super(LulzbotMiniToolheadSelectPage, self).__init__(parent, _("LulzBot Mini Tool Head Selection"))
1204 self.allowBack = allowBack
1205 self.panel = self.AddPanel()
1206 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1207 self.standard = self.AddImageButton(self.panel, 0, 0, _('Single Extruder v2'),
1208 'Lulzbot_Toolhead_Mini_Standard.jpg', image_size,
1209 style=ImageButton.IB_GROUP)
1210 self.flexy = self.AddImageButton(self.panel, 0, 1, _('Flexystruder v2'),
1211 'Lulzbot_Toolhead_Mini_Flexystruder.jpg', image_size)
1212 self.standard.SetValue(True)
1214 def AllowBack(self):
1215 return self.allowBack
1217 def StoreData(self):
1218 if self.standard.GetValue():
1219 profile.putProfileSetting('nozzle_size', '0.5')
1220 profile.putMachineSetting('extruder_amount', '1')
1221 profile.putMachineSetting('toolhead', 'Single Extruder V2')
1222 profile.putMachineSetting('toolhead_shortname', '')
1223 profile.putMachineSetting('machine_type', 'lulzbot_mini')
1225 profile.putProfileSetting('nozzle_size', '0.6')
1226 profile.putMachineSetting('extruder_amount', '1')
1227 profile.putMachineSetting('toolhead', 'Flexystruder V2')
1228 profile.putMachineSetting('toolhead_shortname', 'Flexystruder')
1229 profile.putMachineSetting('machine_type', 'lulzbot_mini_flexystruder')
1232 class LulzbotTazToolheadSelectPage(LulzbotToolheadSelectPage):
1233 def __init__(self, parent):
1234 super(LulzbotTazToolheadSelectPage, self).__init__(parent, _("LulzBot TAZ Tool Head Selection"))
1236 self.panel = self.AddPanel()
1237 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1238 self.single = self.AddImageButton(self.panel, 0, 0, _('Single Extruder v1'),
1239 'Lulzbot_Toolhead_TAZ_Single_v1.jpg', image_size,
1240 style=ImageButton.IB_GROUP)
1241 self.flexy = self.AddImageButton(self.panel, 0, 1, _('Flexystruder v1'),
1242 'Lulzbot_Toolhead_TAZ_Flexystruder_v1.jpg', image_size)
1243 self.dually = self.AddImageButton(self.panel, 1, 0, _('Dual Extruder v1'),
1244 'Lulzbot_Toolhead_TAZ_Dual_Extruder_v1.jpg', image_size)
1245 self.flexydually = self.AddImageButton(self.panel, 1, 1, _('FlexyDually v1'),
1246 'Lulzbot_Toolhead_TAZ_FlexyDually_v1.jpg', image_size)
1248 self.single.SetValue(True)
1250 def SetVersion(self, version):
1251 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1252 self.single.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Single_v%d.jpg' % version, image_size))
1253 self.single.SetLabel(_('Single Extruder v%d' % version))
1254 self.flexy.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Flexystruder_v%d.jpg' % version, image_size))
1255 self.flexy.SetLabel(_('Flexystruder v%d' % version))
1256 self.dually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Dual_Extruder_v%d.jpg' % version, image_size))
1257 self.dually.SetLabel(_('Dual Extruder v%d' % version))
1258 self.flexydually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_FlexyDually_v%d.jpg' % version, image_size))
1259 self.flexydually.SetLabel(_('FlexyDually v%d' % version))
1260 self.version = version
1262 self.single.OnSelected(None)
1263 self.flexy.OnSelected(None)
1264 self.dually.OnSelected(None)
1265 self.flexydually.OnSelected(None)
1266 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1268 self.single.OnSelected(self.OnSingleV2)
1269 self.flexy.OnSelected(self.OnNonSingle)
1270 self.dually.OnSelected(self.OnNonSingle)
1271 self.flexydually.OnSelected(self.OnNonSingle)
1272 if self.single.GetValue():
1273 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1274 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotFirmwarePage)
1276 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1278 def OnSingleV2(self):
1279 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1280 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotFirmwarePage)
1282 def OnNonSingle(self):
1283 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1285 def StoreData(self):
1286 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1290 version = (taz_version, self.version)
1291 if self.single.GetValue():
1292 profile.putProfileSetting('nozzle_size', '0.5' if self.version == 2 else '0.35')
1293 profile.putMachineSetting('extruder_amount', '1')
1294 profile.putMachineSetting('toolhead', 'Single Extruder V%d' % self.version)
1295 profile.putMachineSetting('toolhead_shortname', '')
1296 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_SingleV%d' % version)
1297 elif self.flexy.GetValue():
1298 profile.putProfileSetting('nozzle_size', '0.6')
1299 profile.putMachineSetting('extruder_amount', '1')
1300 profile.putMachineSetting('toolhead', 'Flexystruder V%d' % self.version)
1301 profile.putMachineSetting('toolhead_shortname', 'Flexystruder v%d' % self.version)
1302 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexystruderV%d' % version)
1303 elif self.dually.GetValue():
1304 profile.putProfileSetting('nozzle_size', '0.5')
1305 profile.putMachineSetting('extruder_amount', '2')
1306 profile.putMachineSetting('extruder_offset_x1', '0.0')
1307 profile.putMachineSetting('extruder_offset_y1', '-50.0' if self.version == 2 else '-52.00')
1308 profile.putMachineSetting('toolhead', 'Dual Extruder V%d' % self.version)
1309 profile.putMachineSetting('toolhead_shortname', 'Dually v%d' % self.version)
1310 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_DuallyV%d' % version)
1311 elif self.flexydually.GetValue():
1312 profile.putProfileSetting('nozzle_size', '0.6')
1313 profile.putMachineSetting('extruder_amount', '2')
1314 profile.putMachineSetting('extruder_offset_x1', '0.0')
1315 profile.putMachineSetting('extruder_offset_y1', '-50.0' if self.version == 2 else '-52.00')
1316 profile.putMachineSetting('toolhead', 'FlexyDually V%d' % self.version)
1317 profile.putMachineSetting('toolhead_shortname', 'FlexyDually v%d' % self.version)
1318 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexyDuallyV%d' % version)
1321 class LulzbotHotendSelectPage(LulzbotToolheadSelectPage):
1322 def __init__(self, parent, allowBack = True):
1323 super(LulzbotHotendSelectPage, self).__init__(parent, _("LulzBot Tool Head Hotend Selection"))
1325 self.allowBack = allowBack
1326 self.panel = self.AddPanel()
1327 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1328 self.v1 = self.AddImageButton(self.panel, 0, 0, _('v1 (Budaschnozzle)'),
1329 'Lulzbot_Toolhead_v1.jpg', image_size,
1330 style=ImageButton.IB_GROUP)
1331 self.v2 = self.AddImageButton(self.panel, 0, 1, _('v2 (Hexagon)'),
1332 'Lulzbot_Toolhead_v2.jpg', image_size)
1333 self.v1.SetValue(True)
1335 def AllowBack(self):
1336 return self.allowBack
1338 def StoreData(self):
1339 self.GetParent().lulzbotTazToolheadPage.SetVersion(1 if self.v1.GetValue() else 2)
1341 class LulzbotTaz5NozzleSelectPage(LulzbotToolheadSelectPage):
1342 url2='http://lulzbot.com/printer-identification'
1344 def __init__(self, parent):
1345 super(LulzbotTaz5NozzleSelectPage, self).__init__(parent, _("LulzBot TAZ Single V2 Nozzle Selection"))
1347 self.AddText(_('Please select your Hexagon hotend\'s nozzle diameter:'))
1348 self.Nozzle35Radio = self.AddRadioButton("0.35 mm", style=wx.RB_GROUP)
1349 self.Nozzle35Radio.SetValue(True)
1350 self.Nozzle50Radio = self.AddRadioButton("0.5 mm")
1351 self.AddText(_(' '))
1354 self.AddText(_('If you are not sure which nozzle diameter you have'))
1355 self.AddText(_('please check this webpage: '))
1356 button = self.AddButton(LulzbotTaz5NozzleSelectPage.url2)
1357 button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
1359 def OnUrlClick(self, e):
1360 webbrowser.open(LulzbotTaz5NozzleSelectPage.url2)
1362 def StoreData(self):
1363 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1367 if self.Nozzle35Radio.GetValue():
1368 profile.putProfileSetting('nozzle_size', '0.35')
1369 profile.putMachineSetting('toolhead', 'Single Extruder V2 (0.35mm nozzle)')
1370 profile.putMachineSetting('toolhead_shortname', '0.35 nozzle')
1371 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_035nozzle' % taz_version)
1374 profile.putProfileSetting('nozzle_size', '0.5')
1375 profile.putMachineSetting('toolhead', 'Single Extruder V2 (0.5mm nozzle)')
1376 profile.putMachineSetting('toolhead_shortname', '0.5 nozzle')
1377 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_05nozzle' % taz_version)
1379 class LulzbotFirmwareUpdatePage(InfoPage):
1380 def __init__(self, parent):
1381 super(LulzbotFirmwareUpdatePage, self).__init__(parent, _("LulzBot Firmware Update"))
1383 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1385 self.AddText(_('Your Lulzbot printer\'s firmware will now be updated'))
1387 self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the stepper motors, regulates the temperature\nand ultimately makes your printer work."))
1388 self.AddHiddenSeperator()
1389 self.AddText(_("The firmware shipping with new Lulzbot printers works, but upgrades may be available\nwhich improve the functionality of your printer.\nIf you changed your tool head, you will also need to flash\n new firmware or you risk damaging your printer."))
1390 self.AddHiddenSeperator()
1391 self.AddText(_("To avoid any possible confusion, make sure to disconnect all printers from your PC\nexpect the printer that you are currently configuring."))
1392 self.AddHiddenSeperator()
1393 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Flash the firmware'), _('Skip upgrade'))
1394 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
1395 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
1397 def AllowNext(self):
1398 return version.isDevVersion()
1400 def OnUpgradeClick(self, e):
1401 if firmwareInstall.InstallFirmware():
1402 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
1404 def OnSkipClick(self, e):
1405 dlg = wx.MessageDialog(self, _("Are you sure you want to skip the firmware upgrade?\n" +
1406 "It could damage your printer if you changed your tool head and have not updated thefirmware!"),
1407 _('Skip firmware upgrade?'), wx.YES_NO | wx.ICON_EXCLAMATION)
1408 skip = dlg.ShowModal() == wx.ID_YES
1411 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
1412 self.GetParent().ShowPage(self.GetNext())
1414 class LulzbotChangeToolheadWizard(wx.wizard.Wizard):
1416 super(LulzbotChangeToolheadWizard, self).__init__(None, -1, _("Change Lulzbot Tool Head Wizard"))
1418 self._nozzle_size = profile.getProfileSettingFloat('nozzle_size')
1419 self._machine_name = profile.getMachineSetting('machine_name')
1420 self._machine_type = profile.getMachineSetting('machine_type')
1421 self._extruder_amount = int(profile.getMachineSettingFloat('extruder_amount'))
1423 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1424 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1425 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1427 self.lulzbotReadyPage = LulzbotReadyPage(self)
1428 self.lulzbotFirmwarePage = LulzbotFirmwareUpdatePage(self)
1429 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self, False)
1430 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1431 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self, False)
1432 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1434 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotFirmwarePage)
1435 wx.wizard.WizardPageSimple.Chain(self.lulzbotFirmwarePage, self.lulzbotReadyPage)
1436 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1438 if profile.getMachineSetting('machine_type').startswith('lulzbot_mini'):
1439 self.RunWizard(self.lulzbotMiniToolheadPage)
1441 self.RunWizard(self.lulzbotTazHotendPage)
1444 def OnPageChanging(self, e):
1445 e.GetPage().StoreData()
1447 def OnPageChanged(self, e):
1448 if e.GetPage().AllowNext():
1449 self.FindWindowById(wx.ID_FORWARD).Enable()
1451 self.FindWindowById(wx.ID_FORWARD).Disable()
1452 if e.GetPage().AllowBack():
1453 self.FindWindowById(wx.ID_BACKWARD).Enable()
1455 self.FindWindowById(wx.ID_BACKWARD).Disable()
1457 def OnCancel(self, e):
1458 profile.putProfileSetting('nozzle_size', self._nozzle_size)
1459 profile.putMachineSetting('machine_name', self._machine_name)
1460 profile.putMachineSetting('machine_type', self._machine_type)
1461 profile.putMachineSetting('extruder_amount', self._extruder_amount)
1463 class ConfigWizard(wx.wizard.Wizard):
1464 def __init__(self, addNew = False):
1465 super(ConfigWizard, self).__init__(None, -1, _("Configuration Wizard"))
1467 self._old_machine_index = int(profile.getPreferenceFloat('active_machine'))
1469 profile.setActiveMachine(profile.getMachineCount())
1471 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1472 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1473 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1475 self.machineSelectPage = MachineSelectPage(self)
1476 self.ultimakerSelectParts = SelectParts(self)
1477 self.ultimakerFirmwareUpgradePage = UltimakerFirmwareUpgradePage(self)
1478 self.ultimakerCheckupPage = UltimakerCheckupPage(self)
1479 self.ultimakerCalibrationPage = UltimakerCalibrationPage(self)
1480 self.ultimakerCalibrateStepsPerEPage = UltimakerCalibrateStepsPerEPage(self)
1481 self.bedLevelPage = bedLevelWizardMain(self)
1482 self.headOffsetCalibration = headOffsetCalibrationPage(self)
1483 self.printrbotSelectType = PrintrbotPage(self)
1484 self.otherMachineSelectPage = OtherMachineSelectPage(self)
1485 self.customRepRapInfoPage = CustomRepRapInfoPage(self)
1486 self.otherMachineInfoPage = OtherMachineInfoPage(self)
1488 self.ultimaker2ReadyPage = Ultimaker2ReadyPage(self)
1489 self.lulzbotReadyPage = LulzbotReadyPage(self)
1490 self.lulzbotFirmwarePage = LulzbotFirmwareUpdatePage(self)
1491 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self)
1492 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1493 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self)
1494 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1495 self.lulzbotMachineSelectPage = LulzbotMachineSelectPage(self)
1497 wx.wizard.WizardPageSimple.Chain(self.lulzbotMachineSelectPage, self.lulzbotMiniToolheadPage)
1498 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotFirmwarePage)
1499 wx.wizard.WizardPageSimple.Chain(self.lulzbotFirmwarePage, self.lulzbotReadyPage)
1500 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1501 wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.ultimakerSelectParts)
1502 wx.wizard.WizardPageSimple.Chain(self.ultimakerSelectParts, self.ultimakerFirmwareUpgradePage)
1503 wx.wizard.WizardPageSimple.Chain(self.ultimakerFirmwareUpgradePage, self.ultimakerCheckupPage)
1504 wx.wizard.WizardPageSimple.Chain(self.ultimakerCheckupPage, self.bedLevelPage)
1505 wx.wizard.WizardPageSimple.Chain(self.printrbotSelectType, self.otherMachineInfoPage)
1506 wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
1508 self.RunWizard(self.lulzbotMachineSelectPage)
1511 def OnPageChanging(self, e):
1512 e.GetPage().StoreData()
1514 def OnPageChanged(self, e):
1515 if e.GetPage().AllowNext():
1516 self.FindWindowById(wx.ID_FORWARD).Enable()
1518 self.FindWindowById(wx.ID_FORWARD).Disable()
1519 if e.GetPage().AllowBack():
1520 self.FindWindowById(wx.ID_BACKWARD).Enable()
1522 self.FindWindowById(wx.ID_BACKWARD).Disable()
1524 def OnCancel(self, e):
1525 new_machine_index = int(profile.getPreferenceFloat('active_machine'))
1526 profile.setActiveMachine(self._old_machine_index)
1527 profile.removeMachine(new_machine_index)
1529 class bedLevelWizardMain(InfoPage):
1530 def __init__(self, parent):
1531 super(bedLevelWizardMain, self).__init__(parent, _("Bed leveling wizard"))
1533 self.AddText(_('This wizard will help you in leveling your printer bed'))
1535 self.AddText(_('It will do the following steps'))
1536 self.AddText(_('* Move the printer head to each corner'))
1537 self.AddText(_(' and let you adjust the height of the bed to the nozzle'))
1538 self.AddText(_('* Print a line around the bed to check if it is level'))
1541 self.connectButton = self.AddButton(_('Connect to printer'))
1544 self.infoBox = self.AddInfoBox()
1545 self.resumeButton = self.AddButton(_('Resume'))
1546 self.upButton, self.downButton = self.AddDualButton(_('Up 0.2mm'), _('Down 0.2mm'))
1547 self.upButton2, self.downButton2 = self.AddDualButton(_('Up 10mm'), _('Down 10mm'))
1548 self.resumeButton.Enable(False)
1550 self.upButton.Enable(False)
1551 self.downButton.Enable(False)
1552 self.upButton2.Enable(False)
1553 self.downButton2.Enable(False)
1555 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1556 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1557 self.Bind(wx.EVT_BUTTON, self.OnBedUp, self.upButton)
1558 self.Bind(wx.EVT_BUTTON, self.OnBedDown, self.downButton)
1559 self.Bind(wx.EVT_BUTTON, self.OnBedUp2, self.upButton2)
1560 self.Bind(wx.EVT_BUTTON, self.OnBedDown2, self.downButton2)
1562 def OnConnect(self, e = None):
1563 if self.comm is not None:
1567 wx.CallAfter(self.OnConnect)
1569 self.connectButton.Enable(False)
1570 self.comm = machineCom.MachineCom(callbackObject=self)
1571 self.infoBox.SetBusy(_('Connecting to machine.'))
1572 self._wizardState = 0
1574 def OnBedUp(self, e):
1575 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1576 self.comm.sendCommand('G92 Z10')
1577 self.comm.sendCommand('G1 Z9.8 F%d' % (feedZ))
1578 self.comm.sendCommand('M400')
1580 def OnBedDown(self, e):
1581 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1582 self.comm.sendCommand('G92 Z10')
1583 self.comm.sendCommand('G1 Z10.2 F%d' % (feedZ))
1584 self.comm.sendCommand('M400')
1586 def OnBedUp2(self, e):
1587 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1588 self.comm.sendCommand('G92 Z10')
1589 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1590 self.comm.sendCommand('M400')
1592 def OnBedDown2(self, e):
1593 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1594 self.comm.sendCommand('G92 Z10')
1595 self.comm.sendCommand('G1 Z20 F%d' % (feedZ))
1596 self.comm.sendCommand('M400')
1598 def AllowNext(self):
1599 if self.GetParent().headOffsetCalibration is not None and int(profile.getMachineSetting('extruder_amount')) > 1:
1600 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().headOffsetCalibration)
1603 def OnResume(self, e):
1604 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1605 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1606 if self._wizardState == -1:
1607 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer...'))
1608 wx.CallAfter(self.upButton.Enable, False)
1609 wx.CallAfter(self.downButton.Enable, False)
1610 wx.CallAfter(self.upButton2.Enable, False)
1611 wx.CallAfter(self.downButton2.Enable, False)
1612 self.comm.sendCommand('M105')
1613 self.comm.sendCommand('G28')
1614 self._wizardState = 1
1615 elif self._wizardState == 2:
1616 if profile.getMachineSetting('has_heated_bed') == 'True':
1617 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back center...'))
1618 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1619 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') / 2.0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1620 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1621 self.comm.sendCommand('M400')
1622 self._wizardState = 3
1624 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back left corner...'))
1625 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1626 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1627 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1628 self.comm.sendCommand('M400')
1629 self._wizardState = 3
1630 elif self._wizardState == 4:
1631 if profile.getMachineSetting('has_heated_bed') == 'True':
1632 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1633 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1634 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 5, feedTravel))
1635 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1636 self.comm.sendCommand('M400')
1637 self._wizardState = 7
1639 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back right corner...'))
1640 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1641 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, profile.getMachineSettingFloat('machine_depth') - 25, feedTravel))
1642 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1643 self.comm.sendCommand('M400')
1644 self._wizardState = 5
1645 elif self._wizardState == 6:
1646 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1647 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1648 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 20, feedTravel))
1649 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1650 self.comm.sendCommand('M400')
1651 self._wizardState = 7
1652 elif self._wizardState == 8:
1653 wx.CallAfter(self.infoBox.SetBusy, _('Heating up printer...'))
1654 self.comm.sendCommand('G1 Z15 F%d' % (feedZ))
1655 self.comm.sendCommand('M104 S%d' % (profile.getProfileSettingFloat('print_temperature')))
1656 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, 0, feedTravel))
1657 self._wizardState = 9
1658 elif self._wizardState == 10:
1659 self._wizardState = 11
1660 wx.CallAfter(self.infoBox.SetInfo, _('Printing a square on the printer bed at 0.3mm height.'))
1661 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1662 feedPrint = profile.getProfileSettingFloat('print_speed') * 60
1663 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1664 w = profile.getMachineSettingFloat('machine_width') - 10
1665 d = profile.getMachineSettingFloat('machine_depth')
1666 filamentRadius = profile.getProfileSettingFloat('filament_diameter') / 2
1667 filamentArea = math.pi * filamentRadius * filamentRadius
1668 ePerMM = (profile.calculateEdgeWidth() * 0.3) / filamentArea
1672 'G1 Z2 F%d' % (feedZ),
1674 'G1 X%d Y%d F%d' % (5, 5, feedTravel),
1675 'G1 Z0.3 F%d' % (feedZ)]
1677 gcodeList.append('G1 E%f F%d' % (eValue, profile.getProfileSettingFloat('retraction_speed') * 60))
1679 for i in xrange(0, 3):
1680 dist = 5.0 + 0.4 * float(i)
1681 eValue += (d - 2.0*dist) * ePerMM
1682 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, d - dist, eValue, feedPrint))
1683 eValue += (w - 2.0*dist) * ePerMM
1684 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, d - dist, eValue, feedPrint))
1685 eValue += (d - 2.0*dist) * ePerMM
1686 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, dist, eValue, feedPrint))
1687 eValue += (w - 2.0*dist) * ePerMM
1688 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, dist, eValue, feedPrint))
1690 gcodeList.append('M400')
1691 self.comm.printGCode(gcodeList)
1692 self.resumeButton.Enable(False)
1694 def mcLog(self, message):
1695 print 'Log:', message
1697 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1698 if self._wizardState == 1:
1699 self._wizardState = 2
1700 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front left screw of your printer bed\nSo the nozzle just hits the bed.'))
1701 wx.CallAfter(self.resumeButton.Enable, True)
1702 elif self._wizardState == 3:
1703 self._wizardState = 4
1704 if profile.getMachineSetting('has_heated_bed') == 'True':
1705 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back screw of your printer bed\nSo the nozzle just hits the bed.'))
1707 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back left screw of your printer bed\nSo the nozzle just hits the bed.'))
1708 wx.CallAfter(self.resumeButton.Enable, True)
1709 elif self._wizardState == 5:
1710 self._wizardState = 6
1711 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back right screw of your printer bed\nSo the nozzle just hits the bed.'))
1712 wx.CallAfter(self.resumeButton.Enable, True)
1713 elif self._wizardState == 7:
1714 self._wizardState = 8
1715 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front right screw of your printer bed\nSo the nozzle just hits the bed.'))
1716 wx.CallAfter(self.resumeButton.Enable, True)
1717 elif self._wizardState == 9:
1718 if temp[0] < profile.getProfileSettingFloat('print_temperature') - 5:
1719 wx.CallAfter(self.infoBox.SetInfo, _('Heating up printer: %d/%d') % (temp[0], profile.getProfileSettingFloat('print_temperature')))
1721 wx.CallAfter(self.infoBox.SetAttention, _('The printer is hot now. Please insert some PLA filament into the printer.'))
1722 wx.CallAfter(self.resumeButton.Enable, True)
1723 self._wizardState = 10
1725 def mcStateChange(self, state):
1726 if self.comm is None:
1728 if self.comm.isOperational():
1729 if self._wizardState == 0:
1730 wx.CallAfter(self.infoBox.SetAttention, _('Use the up/down buttons to move the bed and adjust your Z endstop.'))
1731 wx.CallAfter(self.upButton.Enable, True)
1732 wx.CallAfter(self.downButton.Enable, True)
1733 wx.CallAfter(self.upButton2.Enable, True)
1734 wx.CallAfter(self.downButton2.Enable, True)
1735 wx.CallAfter(self.resumeButton.Enable, True)
1736 self._wizardState = -1
1737 elif self._wizardState == 11 and not self.comm.isPrinting():
1738 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1739 self.comm.sendCommand('G92 E0')
1740 self.comm.sendCommand('G1 E-10 F%d' % (profile.getProfileSettingFloat('retraction_speed') * 60))
1741 self.comm.sendCommand('M104 S0')
1742 wx.CallAfter(self.infoBox.SetInfo, _('Calibration finished.\nThe squares on the bed should slightly touch each other.'))
1743 wx.CallAfter(self.infoBox.SetReadyIndicator)
1744 wx.CallAfter(self.GetParent().FindWindowById(wx.ID_FORWARD).Enable)
1745 wx.CallAfter(self.connectButton.Enable, True)
1746 self._wizardState = 12
1747 elif self.comm.isError():
1748 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1750 def mcMessage(self, message):
1753 def mcProgress(self, lineNr):
1756 def mcZChange(self, newZ):
1759 class headOffsetCalibrationPage(InfoPage):
1760 def __init__(self, parent):
1761 super(headOffsetCalibrationPage, self).__init__(parent, _("Printer head offset calibration"))
1763 self.AddText(_('This wizard will help you in calibrating the printer head offsets of your dual extrusion machine'))
1766 self.connectButton = self.AddButton(_('Connect to printer'))
1769 self.infoBox = self.AddInfoBox()
1770 self.textEntry = self.AddTextCtrl('')
1771 self.textEntry.Enable(False)
1772 self.resumeButton = self.AddButton(_('Resume'))
1773 self.resumeButton.Enable(False)
1775 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1776 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1778 def AllowBack(self):
1781 def OnConnect(self, e = None):
1782 if self.comm is not None:
1786 wx.CallAfter(self.OnConnect)
1788 self.connectButton.Enable(False)
1789 self.comm = machineCom.MachineCom(callbackObject=self)
1790 self.infoBox.SetBusy(_('Connecting to machine.'))
1791 self._wizardState = 0
1793 def OnResume(self, e):
1794 if self._wizardState == 2:
1795 self._wizardState = 3
1796 wx.CallAfter(self.infoBox.SetBusy, _('Printing initial calibration cross'))
1798 w = profile.getMachineSettingFloat('machine_width')
1799 d = profile.getMachineSettingFloat('machine_depth')
1801 gcode = gcodeGenerator.gcodeGenerator()
1802 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1803 gcode.setPrintSpeed(profile.getProfileSettingFloat('bottom_layer_speed'))
1810 gcode.addMove(w/2, 5)
1811 gcode.addMove(z=0.2)
1813 gcode.addExtrude(w/2, d-5.0)
1815 gcode.addMove(5, d/2)
1817 gcode.addExtrude(w-5.0, d/2)
1818 gcode.addRetract(15)
1821 gcode.addMove(w/2, 5)
1823 gcode.addExtrude(w/2, d-5.0)
1825 gcode.addMove(5, d/2)
1827 gcode.addExtrude(w-5.0, d/2)
1828 gcode.addRetract(15)
1833 gcode.addCmd('M400')
1835 self.comm.printGCode(gcode.list())
1836 self.resumeButton.Enable(False)
1837 elif self._wizardState == 4:
1839 float(self.textEntry.GetValue())
1842 profile.putPreference('extruder_offset_x1', self.textEntry.GetValue())
1843 self._wizardState = 5
1844 self.infoBox.SetAttention(_('Please measure the distance between the horizontal lines in millimeters.'))
1845 self.textEntry.SetValue('0.0')
1846 self.textEntry.Enable(True)
1847 elif self._wizardState == 5:
1849 float(self.textEntry.GetValue())
1852 profile.putPreference('extruder_offset_y1', self.textEntry.GetValue())
1853 self._wizardState = 6
1854 self.infoBox.SetBusy(_('Printing the fine calibration lines.'))
1855 self.textEntry.SetValue('')
1856 self.textEntry.Enable(False)
1857 self.resumeButton.Enable(False)
1859 x = profile.getMachineSettingFloat('extruder_offset_x1')
1860 y = profile.getMachineSettingFloat('extruder_offset_y1')
1861 gcode = gcodeGenerator.gcodeGenerator()
1862 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1863 gcode.setPrintSpeed(25)
1866 gcode.addMove(50, 40, 0.2)
1868 for n in xrange(0, 10):
1869 gcode.addExtrude(50 + n * 10, 150)
1870 gcode.addExtrude(50 + n * 10 + 5, 150)
1871 gcode.addExtrude(50 + n * 10 + 5, 40)
1872 gcode.addExtrude(50 + n * 10 + 10, 40)
1873 gcode.addMove(40, 50)
1874 for n in xrange(0, 10):
1875 gcode.addExtrude(150, 50 + n * 10)
1876 gcode.addExtrude(150, 50 + n * 10 + 5)
1877 gcode.addExtrude(40, 50 + n * 10 + 5)
1878 gcode.addExtrude(40, 50 + n * 10 + 10)
1879 gcode.addRetract(15)
1882 gcode.addMove(50 - x, 30 - y, 0.2)
1884 for n in xrange(0, 10):
1885 gcode.addExtrude(50 + n * 10.2 - 1.0 - x, 140 - y)
1886 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 140 - y)
1887 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 30 - y)
1888 gcode.addExtrude(50 + n * 10.2 - 1.0 + 10 - x, 30 - y)
1889 gcode.addMove(30 - x, 50 - y, 0.2)
1890 for n in xrange(0, 10):
1891 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 - y)
1892 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1893 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1894 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 10 - y)
1895 gcode.addRetract(15)
1897 gcode.addCmd('M400')
1898 gcode.addCmd('M104 T0 S0')
1899 gcode.addCmd('M104 T1 S0')
1900 self.comm.printGCode(gcode.list())
1901 elif self._wizardState == 7:
1903 n = int(self.textEntry.GetValue()) - 1
1906 x = profile.getMachineSettingFloat('extruder_offset_x1')
1908 profile.putPreference('extruder_offset_x1', '%0.2f' % (x))
1909 self.infoBox.SetAttention(_('Which horizontal line number lays perfect on top of each other? Front most line is zero.'))
1910 self.textEntry.SetValue('10')
1911 self._wizardState = 8
1912 elif self._wizardState == 8:
1914 n = int(self.textEntry.GetValue()) - 1
1917 y = profile.getMachineSettingFloat('extruder_offset_y1')
1919 profile.putPreference('extruder_offset_y1', '%0.2f' % (y))
1920 self.infoBox.SetInfo(_('Calibration finished. Offsets are: %s %s') % (profile.getMachineSettingFloat('extruder_offset_x1'), profile.getMachineSettingFloat('extruder_offset_y1')))
1921 self.infoBox.SetReadyIndicator()
1922 self._wizardState = 8
1924 self.resumeButton.Enable(False)
1926 def mcLog(self, message):
1927 print 'Log:', message
1929 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1930 if self._wizardState == 1:
1931 if temp[0] >= 210 and temp[1] >= 210:
1932 self._wizardState = 2
1933 wx.CallAfter(self.infoBox.SetAttention, _('Please load both extruders with PLA.'))
1934 wx.CallAfter(self.resumeButton.Enable, True)
1935 wx.CallAfter(self.resumeButton.SetFocus)
1937 def mcStateChange(self, state):
1938 if self.comm is None:
1940 if self.comm.isOperational():
1941 if self._wizardState == 0:
1942 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer and heating up both extruders.'))
1943 self.comm.sendCommand('M105')
1944 self.comm.sendCommand('M104 S220 T0')
1945 self.comm.sendCommand('M104 S220 T1')
1946 self.comm.sendCommand('G28')
1947 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1948 self._wizardState = 1
1949 if not self.comm.isPrinting():
1950 if self._wizardState == 3:
1951 self._wizardState = 4
1952 wx.CallAfter(self.infoBox.SetAttention, _('Please measure the distance between the vertical lines in millimeters.'))
1953 wx.CallAfter(self.textEntry.SetValue, '0.0')
1954 wx.CallAfter(self.textEntry.Enable, True)
1955 wx.CallAfter(self.resumeButton.Enable, True)
1956 wx.CallAfter(self.resumeButton.SetFocus)
1957 elif self._wizardState == 6:
1958 self._wizardState = 7
1959 wx.CallAfter(self.infoBox.SetAttention, _('Which vertical line number lays perfect on top of each other? Leftmost line is zero.'))
1960 wx.CallAfter(self.textEntry.SetValue, '10')
1961 wx.CallAfter(self.textEntry.Enable, True)
1962 wx.CallAfter(self.resumeButton.Enable, True)
1963 wx.CallAfter(self.resumeButton.SetFocus)
1965 elif self.comm.isError():
1966 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1968 def mcMessage(self, message):
1971 def mcProgress(self, lineNr):
1974 def mcZChange(self, newZ):
1977 class bedLevelWizard(wx.wizard.Wizard):
1979 super(bedLevelWizard, self).__init__(None, -1, _("Bed leveling wizard"))
1981 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1982 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1984 self.mainPage = bedLevelWizardMain(self)
1985 self.headOffsetCalibration = None
1987 self.RunWizard(self.mainPage)
1990 def OnPageChanging(self, e):
1991 e.GetPage().StoreData()
1993 def OnPageChanged(self, e):
1994 if e.GetPage().AllowNext():
1995 self.FindWindowById(wx.ID_FORWARD).Enable()
1997 self.FindWindowById(wx.ID_FORWARD).Disable()
1998 if e.GetPage().AllowBack():
1999 self.FindWindowById(wx.ID_BACKWARD).Enable()
2001 self.FindWindowById(wx.ID_BACKWARD).Disable()
2003 class headOffsetWizard(wx.wizard.Wizard):
2005 super(headOffsetWizard, self).__init__(None, -1, _("Head offset wizard"))
2007 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
2008 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
2010 self.mainPage = headOffsetCalibrationPage(self)
2012 self.RunWizard(self.mainPage)
2015 def OnPageChanging(self, e):
2016 e.GetPage().StoreData()
2018 def OnPageChanged(self, e):
2019 if e.GetPage().AllowNext():
2020 self.FindWindowById(wx.ID_FORWARD).Enable()
2022 self.FindWindowById(wx.ID_FORWARD).Disable()
2023 if e.GetPage().AllowBack():
2024 self.FindWindowById(wx.ID_BACKWARD).Enable()
2026 self.FindWindowById(wx.ID_BACKWARD).Disable()