1 __copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
12 from Cura.gui import firmwareInstall
13 from Cura.gui import printWindow
14 from Cura.util import machineCom
15 from Cura.util import profile
16 from Cura.util import gcodeGenerator
17 from Cura.util import resources
20 class InfoBox(wx.Panel):
21 def __init__(self, parent):
22 super(InfoBox, self).__init__(parent)
23 self.SetBackgroundColour('#FFFF80')
25 self.sizer = wx.GridBagSizer(5, 5)
26 self.SetSizer(self.sizer)
28 self.attentionBitmap = wx.Bitmap(resources.getPathForImage('attention.png'))
29 self.errorBitmap = wx.Bitmap(resources.getPathForImage('error.png'))
30 self.readyBitmap = wx.Bitmap(resources.getPathForImage('ready.png'))
32 wx.Bitmap(resources.getPathForImage('busy-0.png')),
33 wx.Bitmap(resources.getPathForImage('busy-1.png')),
34 wx.Bitmap(resources.getPathForImage('busy-2.png')),
35 wx.Bitmap(resources.getPathForImage('busy-3.png'))
38 self.bitmap = wx.StaticBitmap(self, -1, wx.EmptyBitmapRGBA(24, 24, red=255, green=255, blue=255, alpha=1))
39 self.text = wx.StaticText(self, -1, '')
40 self.extraInfoButton = wx.Button(self, -1, 'i', style=wx.BU_EXACTFIT)
41 self.sizer.Add(self.bitmap, pos=(0, 0), flag=wx.ALL, border=5)
42 self.sizer.Add(self.text, pos=(0, 1), flag=wx.TOP | wx.BOTTOM | wx.ALIGN_CENTER_VERTICAL, border=5)
43 self.sizer.Add(self.extraInfoButton, pos=(0,2), flag=wx.ALL|wx.ALIGN_RIGHT|wx.ALIGN_CENTER_VERTICAL, border=5)
44 self.sizer.AddGrowableCol(1)
46 self.extraInfoButton.Show(False)
48 self.extraInfoUrl = ''
50 self.timer = wx.Timer(self)
51 self.Bind(wx.EVT_TIMER, self.doBusyUpdate, self.timer)
52 self.Bind(wx.EVT_BUTTON, self.doExtraInfo, self.extraInfoButton)
55 def SetInfo(self, info):
56 self.SetBackgroundColour('#FFFF80')
57 self.text.SetLabel(info)
58 self.extraInfoButton.Show(False)
61 def SetError(self, info, extraInfoUrl):
62 self.extraInfoUrl = extraInfoUrl
63 self.SetBackgroundColour('#FF8080')
64 self.text.SetLabel(info)
66 self.extraInfoButton.Show(True)
68 self.SetErrorIndicator()
71 def SetAttention(self, info):
72 self.SetBackgroundColour('#FFFF80')
73 self.text.SetLabel(info)
74 self.extraInfoButton.Show(False)
75 self.SetAttentionIndicator()
79 def SetBusy(self, info):
81 self.SetBusyIndicator()
83 def SetBusyIndicator(self):
85 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
87 def doExtraInfo(self, e):
88 webbrowser.open(self.extraInfoUrl)
90 def doBusyUpdate(self, e):
91 if self.busyState is None:
94 if self.busyState >= len(self.busyBitmap):
96 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
98 def SetReadyIndicator(self):
100 self.bitmap.SetBitmap(self.readyBitmap)
102 def SetErrorIndicator(self):
103 self.busyState = None
104 self.bitmap.SetBitmap(self.errorBitmap)
106 def SetAttentionIndicator(self):
107 self.busyState = None
108 self.bitmap.SetBitmap(self.attentionBitmap)
110 class ImageButton(wx.Panel):
111 DefaultOverlay = wx.Bitmap(resources.getPathForImage('ImageButton_Overlay.png'))
114 __last_group__ = None
115 def __init__(self, parent, label, bitmap, extra_label=None, overlay=DefaultOverlay, style=None):
116 super(ImageButton, self).__init__(parent)
118 if style is ImageButton.IB_GROUP:
119 ImageButton.__last_group__ = self
120 ImageButton.__groups__[self] = [self]
123 if ImageButton.__last_group__:
124 ImageButton.__groups__[ImageButton.__last_group__].append(self)
125 self.group = ImageButton.__last_group__
128 self.sizer = wx.StaticBoxSizer(wx.StaticBox(self), wx.VERTICAL)
129 self.SetSizer(self.sizer)
131 self.original_overlay = overlay
132 self.overlay = self.createOverlay(bitmap, overlay)
133 self.text = wx.StaticText(self, -1, label)
134 self.bmp = wx.StaticBitmap(self, -1, self.bitmap)
136 self.extra_text = wx.StaticText(self, -1, extra_label)
138 self.extra_text = None
139 self.selected = False
142 self.sizer.Add(self.text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
143 self.sizer.Add(self.bmp, 1, flag=wx.ALL|wx.ALIGN_CENTER|wx.EXPAND, border=5)
145 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
146 self.bmp.Bind(wx.EVT_LEFT_UP, self.OnLeftClick)
150 ImageButton.__groups__[self.group].remove(self)
151 if self == self.group:
152 for ib in ImageButton.__groups__[self.group]:
154 del ImageButton.__groups__[self.group]
155 if ImageButton.__last_group__ == self:
156 ImageButton.__last_group__ = None
158 def OnLeftClick(self, e):
164 def SetValue(self, value):
165 old_value = self.selected
166 self.selected = bool(value)
167 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
168 if self.selected and self.group:
169 for ib in ImageButton.__groups__[self.group]:
174 if self.callback and not old_value and self.selected:
177 def SetLabel(self, label):
178 self.text.SetLabel(label)
181 def SetExtraLabel(self, label):
183 self.extra_text.SetLabel(label)
185 self.extra_text = wx.StaticText(self, -1, label)
186 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
189 def SetBitmap(self, bitmap):
191 self.overlay = self.createOverlay(bitmap, self.original_overlay)
192 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
195 def SetOverlay(self, overlay):
196 self.original_overlay = overlay
197 self.overlay = self.createOverlay(self.bitmap, self.original_overlay)
198 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
201 def OnSelected(self, callback):
202 self.callback = callback
204 def createOverlay(self, bitmap, overlay):
205 result = bitmap.GetSubBitmap(wx.Rect(0, 0, *bitmap.Size))
206 (width, height) = bitmap.GetSize()
207 overlay_image = wx.ImageFromBitmap(overlay)
208 overlay_image = overlay_image.Scale(width, height, wx.IMAGE_QUALITY_HIGH)
209 overlay_scaled = wx.BitmapFromImage(overlay_image)
211 dc.SelectObject(result)
212 dc.DrawBitmap(overlay_scaled, 0, 0)
213 dc.SelectObject(wx.NullBitmap)
217 class InfoPage(wx.wizard.WizardPageSimple):
218 def __init__(self, parent, title):
219 wx.wizard.WizardPageSimple.__init__(self, parent)
221 parent.GetPageAreaSizer().Add(self)
222 sizer = wx.GridBagSizer(5, 5)
226 self.title = wx.StaticText(self, -1, title)
227 font = wx.Font(18, wx.SWISS, wx.NORMAL, wx.BOLD)
228 self.title.SetFont(font)
229 # HACK ALERT: For some reason, the StaticText keeps its same size as if
230 # the font was not modified, this causes the text to wrap and to
231 # get out of bounds of the widgets area and hide other widgets.
232 # The only way I found for the widget to get its right size was to calculate
233 # the new font's extent and set the min size on the widget
234 self.title.SetMinSize(self.GetTextExtent(font, title))
235 sizer.Add(self.title, pos=(0, 0), span=(1, 2), flag=wx.ALIGN_CENTRE | wx.ALL)
236 sizer.Add(wx.StaticLine(self, -1), pos=(1, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
237 sizer.AddGrowableCol(1)
241 def GetTextExtent(self, font, text):
244 w,h = dc.GetTextExtent(text)
247 def AddText(self, info):
248 text = wx.StaticText(self, -1, info)
249 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
253 def AddSeperator(self):
254 self.GetSizer().Add(wx.StaticLine(self, -1), pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
257 def AddHiddenSeperator(self):
260 def AddInfoBox(self):
261 infoBox = InfoBox(self)
262 self.GetSizer().Add(infoBox, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
266 def AddRadioButton(self, label, style=0):
267 radio = wx.RadioButton(self, -1, label, style=style)
268 self.GetSizer().Add(radio, pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
272 def AddCheckbox(self, label, checked=False):
273 check = wx.CheckBox(self, -1)
274 text = wx.StaticText(self, -1, label)
275 check.SetValue(checked)
276 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
277 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 2), flag=wx.ALL)
281 def AddButton(self, label):
282 button = wx.Button(self, -1, label)
283 self.GetSizer().Add(button, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
287 def AddDualButton(self, label1, label2):
288 button1 = wx.Button(self, -1, label1)
289 self.GetSizer().Add(button1, pos=(self.rowNr, 0), flag=wx.RIGHT)
290 button2 = wx.Button(self, -1, label2)
291 self.GetSizer().Add(button2, pos=(self.rowNr, 1))
293 return button1, button2
295 def AddTextCtrl(self, value):
296 ret = wx.TextCtrl(self, -1, value)
297 self.GetSizer().Add(ret, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
301 def AddLabelTextCtrl(self, info, value):
302 text = wx.StaticText(self, -1, info)
303 ret = wx.TextCtrl(self, -1, value)
304 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
305 self.GetSizer().Add(ret, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
309 def AddTextCtrlButton(self, value, buttonText):
310 text = wx.TextCtrl(self, -1, value)
311 button = wx.Button(self, -1, buttonText)
312 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
313 self.GetSizer().Add(button, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
317 def AddBitmap(self, bitmap):
318 bitmap = wx.StaticBitmap(self, -1, bitmap)
319 self.GetSizer().Add(bitmap, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
324 panel = wx.Panel(self, -1)
325 sizer = wx.GridBagSizer(2, 2)
326 panel.SetSizer(sizer)
327 self.GetSizer().Add(panel, pos=(self.rowNr, 0), span=(1, 2), flag=wx.ALL | wx.EXPAND)
331 def AddCheckmark(self, label, bitmap):
332 check = wx.StaticBitmap(self, -1, bitmap)
333 text = wx.StaticText(self, -1, label)
334 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
335 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 1), flag=wx.ALL)
339 def AddCombo(self, label, options):
340 combo = wx.ComboBox(self, -1, options[0], choices=options, style=wx.CB_DROPDOWN|wx.CB_READONLY)
341 text = wx.StaticText(self, -1, label)
342 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.ALIGN_CENTER)
343 self.GetSizer().Add(combo, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
347 def AddImageButton(self, panel, x, y, label, filename, image_size=None,
348 extra_label=None, overlay=ImageButton.DefaultOverlay, style=None):
349 ib = ImageButton(panel, label, self.GetBitmap(filename, image_size), extra_label, overlay, style)
350 panel.GetSizer().Add(ib, pos=(x, y), flag=wx.LEFT | wx.RIGHT | wx.BOTTOM, border=10)
353 def GetBitmap(self, filename, image_size):
354 if image_size == None:
355 return wx.Bitmap(resources.getPathForImage(filename))
357 image = wx.Image(resources.getPathForImage(filename))
358 image_scaled = image.Scale(image_size[0], image_size[1], wx.IMAGE_QUALITY_HIGH)
359 return wx.BitmapFromImage(image_scaled)
370 class PrintrbotPage(InfoPage):
371 def __init__(self, parent):
372 self._printer_info = [
373 # X, Y, Z, Nozzle Size, Filament Diameter, PrintTemperature, Print Speed, Travel Speed, Retract speed, Retract amount, use bed level sensor
374 ("Simple Metal", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, True),
375 ("Metal Plus", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
376 ("Simple Makers Kit", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, True),
377 (":" + _("Older models"),),
378 ("Original", 130, 130, 130, 0.5, 2.95, 208, 40, 70, 30, 1, False),
379 ("Simple Maker's Edition v1", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
380 ("Simple Maker's Edition v2 (2013 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
381 ("Simple Maker's Edition v3 (2014 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
382 ("Jr v1", 115, 120, 80, 0.4, 1.75, 208, 40, 70, 30, 1, False),
383 ("Jr v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
384 ("LC v1", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
385 ("LC v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
386 ("Plus v1", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
387 ("Plus v2", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
388 ("Plus v2.1", 185, 220, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
389 ("Plus v2.2 (Model 1404/140422/140501/140507)", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
390 ("Go v2 Large", 505, 306, 310, 0.4, 1.75, 208, 35, 70, 30, 1, True),
393 super(PrintrbotPage, self).__init__(parent, _("Printrbot Selection"))
394 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Printrbot_logo.png')))
395 self.AddText(_("Select which Printrbot machine you have:"))
397 for printer in self._printer_info:
398 if printer[0].startswith(":"):
400 self.AddText(printer[0][1:])
402 item = self.AddRadioButton(printer[0])
403 item.data = printer[1:]
404 self._items.append(item)
407 profile.putMachineSetting('machine_name', 'Printrbot ???')
408 for item in self._items:
411 profile.putMachineSetting('machine_name', 'Printrbot ' + item.GetLabel())
412 profile.putMachineSetting('machine_width', data[0])
413 profile.putMachineSetting('machine_depth', data[1])
414 profile.putMachineSetting('machine_height', data[2])
415 profile.putProfileSetting('nozzle_size', data[3])
416 profile.putProfileSetting('filament_diameter', data[4])
417 profile.putProfileSetting('print_temperature', data[5])
418 profile.putProfileSetting('print_speed', data[6])
419 profile.putProfileSetting('travel_speed', data[7])
420 profile.putProfileSetting('retraction_speed', data[8])
421 profile.putProfileSetting('retraction_amount', data[9])
422 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
423 profile.putMachineSetting('has_heated_bed', 'False')
424 profile.putMachineSetting('machine_center_is_zero', 'False')
425 profile.putMachineSetting('extruder_head_size_min_x', '0')
426 profile.putMachineSetting('extruder_head_size_min_y', '0')
427 profile.putMachineSetting('extruder_head_size_max_x', '0')
428 profile.putMachineSetting('extruder_head_size_max_y', '0')
429 profile.putMachineSetting('extruder_head_size_height', '0')
431 profile.setAlterationFile('start.gcode', """;Sliced at: {day} {date} {time}
432 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
433 ;Print time: {print_time}
434 ;Filament used: {filament_amount}m {filament_weight}g
435 ;Filament cost: {filament_cost}
436 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
437 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
439 G90 ;absolute positioning
440 M82 ;set extruder to absolute mode
441 M107 ;start with the fan off
442 G28 X0 Y0 ;move X/Y to min endstops
443 G28 Z0 ;move Z to min endstops
444 G29 ;Run the auto bed leveling
445 G1 Z15.0 F{travel_speed} ;move the platform down 15mm
446 G92 E0 ;zero the extruded length
447 G1 F200 E3 ;extrude 3mm of feed stock
448 G92 E0 ;zero the extruded length again
450 ;Put printing message on LCD screen
454 class OtherMachineSelectPage(InfoPage):
455 def __init__(self, parent):
456 super(OtherMachineSelectPage, self).__init__(parent, _("Other machine information"))
457 self.AddText(_("The following pre-defined machine profiles are available"))
458 self.AddText(_("Note that these profiles are not guaranteed to give good results,\nor work at all. Extra tweaks might be required.\nIf you find issues with the predefined profiles,\nor want an extra profile.\nPlease report it at the github issue tracker."))
460 machines = resources.getDefaultMachineProfiles()
462 for filename in machines:
463 name = os.path.splitext(os.path.basename(filename))[0]
464 item = self.AddRadioButton(name)
465 item.filename = filename
466 item.Bind(wx.EVT_RADIOBUTTON, self.OnProfileSelect)
467 self.options.append(item)
469 item = self.AddRadioButton(_('Custom...'))
471 item.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
473 def OnProfileSelect(self, e):
474 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineInfoPage)
476 def OnOtherSelect(self, e):
477 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().customRepRapInfoPage)
480 for option in self.options:
481 if option.GetValue():
482 profile.loadProfile(option.filename)
483 profile.loadMachineSettings(option.filename)
485 class OtherMachineInfoPage(InfoPage):
486 def __init__(self, parent):
487 super(OtherMachineInfoPage, self).__init__(parent, _("Cura Ready!"))
488 self.AddText(_("Cura is now ready to be used!"))
490 class CustomRepRapInfoPage(InfoPage):
491 def __init__(self, parent):
492 super(CustomRepRapInfoPage, self).__init__(parent, _("Custom RepRap information"))
493 self.AddText(_("RepRap machines can be vastly different, so here you can set your own settings."))
494 self.AddText(_("Be sure to review the default profile before running it on your machine."))
495 self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
497 self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
499 self.machineName = self.AddLabelTextCtrl(_("Machine name"), "RepRap")
500 self.machineWidth = self.AddLabelTextCtrl(_("Machine width X (mm)"), "80")
501 self.machineDepth = self.AddLabelTextCtrl(_("Machine depth Y (mm)"), "80")
502 self.machineHeight = self.AddLabelTextCtrl(_("Machine height Z (mm)"), "55")
503 self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
504 self.heatedBed = self.AddCheckbox(_("Heated bed"))
505 self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
508 profile.putMachineSetting('machine_name', self.machineName.GetValue())
509 profile.putMachineSetting('machine_width', self.machineWidth.GetValue())
510 profile.putMachineSetting('machine_depth', self.machineDepth.GetValue())
511 profile.putMachineSetting('machine_height', self.machineHeight.GetValue())
512 profile.putProfileSetting('nozzle_size', self.nozzleSize.GetValue())
513 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
514 profile.putMachineSetting('has_heated_bed', str(self.heatedBed.GetValue()))
515 profile.putMachineSetting('machine_center_is_zero', str(self.HomeAtCenter.GetValue()))
516 profile.putMachineSetting('extruder_head_size_min_x', '0')
517 profile.putMachineSetting('extruder_head_size_min_y', '0')
518 profile.putMachineSetting('extruder_head_size_max_x', '0')
519 profile.putMachineSetting('extruder_head_size_max_y', '0')
520 profile.putMachineSetting('extruder_head_size_height', '0')
521 profile.checkAndUpdateMachineName()
523 class MachineSelectPage(InfoPage):
524 def __init__(self, parent):
525 super(MachineSelectPage, self).__init__(parent, _("Select your machine"))
526 self.AddText(_("What kind of machine do you have:"))
528 self.Ultimaker2Radio = self.AddRadioButton("Ultimaker2")
529 self.Ultimaker2Radio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
530 self.Ultimaker2ExtRadio = self.AddRadioButton("Ultimaker2extended")
531 self.Ultimaker2ExtRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
532 self.Ultimaker2GoRadio = self.AddRadioButton("Ultimaker2go")
533 self.Ultimaker2GoRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
534 self.UltimakerRadio = self.AddRadioButton("Ultimaker Original")
535 self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
536 self.UltimakerOPRadio = self.AddRadioButton("Ultimaker Original+")
537 self.UltimakerOPRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerOPSelect)
538 self.PrintrbotRadio = self.AddRadioButton("Printrbot")
539 self.PrintrbotRadio.Bind(wx.EVT_RADIOBUTTON, self.OnPrintrbotSelect)
540 self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap, MakerBot, Witbox)"))
541 self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
543 def OnUltimaker2Select(self, e):
544 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimaker2ReadyPage)
546 def OnUltimakerSelect(self, e):
547 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerSelectParts)
549 def OnUltimakerOPSelect(self, e):
550 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerFirmwareUpgradePage)
552 def OnPrintrbotSelect(self, e):
553 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().printrbotSelectType)
555 def OnOtherSelect(self, e):
556 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
559 profile.putProfileSetting('retraction_enable', 'True')
560 if self.Ultimaker2Radio.GetValue() or self.Ultimaker2GoRadio.GetValue() or self.Ultimaker2ExtRadio.GetValue():
561 if self.Ultimaker2Radio.GetValue():
562 profile.putMachineSetting('machine_width', '230')
563 profile.putMachineSetting('machine_depth', '225')
564 profile.putMachineSetting('machine_height', '205')
565 profile.putMachineSetting('machine_name', 'ultimaker2')
566 profile.putMachineSetting('machine_type', 'ultimaker2')
567 profile.putMachineSetting('has_heated_bed', 'True')
568 if self.Ultimaker2GoRadio.GetValue():
569 profile.putMachineSetting('machine_width', '120')
570 profile.putMachineSetting('machine_depth', '120')
571 profile.putMachineSetting('machine_height', '115')
572 profile.putMachineSetting('machine_name', 'ultimaker2go')
573 profile.putMachineSetting('machine_type', 'ultimaker2go')
574 profile.putMachineSetting('has_heated_bed', 'False')
575 if self.Ultimaker2ExtRadio.GetValue():
576 profile.putMachineSetting('machine_width', '230')
577 profile.putMachineSetting('machine_depth', '225')
578 profile.putMachineSetting('machine_height', '315')
579 profile.putMachineSetting('machine_name', 'ultimaker2extended')
580 profile.putMachineSetting('machine_type', 'ultimaker2extended')
581 profile.putMachineSetting('has_heated_bed', 'False')
582 profile.putMachineSetting('machine_center_is_zero', 'False')
583 profile.putMachineSetting('gcode_flavor', 'UltiGCode')
584 profile.putMachineSetting('extruder_head_size_min_x', '40.0')
585 profile.putMachineSetting('extruder_head_size_min_y', '10.0')
586 profile.putMachineSetting('extruder_head_size_max_x', '60.0')
587 profile.putMachineSetting('extruder_head_size_max_y', '30.0')
588 profile.putMachineSetting('extruder_head_size_height', '48.0')
589 profile.putProfileSetting('nozzle_size', '0.4')
590 profile.putProfileSetting('fan_full_height', '5.0')
591 profile.putMachineSetting('extruder_offset_x1', '18.0')
592 profile.putMachineSetting('extruder_offset_y1', '0.0')
593 elif self.UltimakerRadio.GetValue():
594 profile.putMachineSetting('machine_width', '205')
595 profile.putMachineSetting('machine_depth', '205')
596 profile.putMachineSetting('machine_height', '200')
597 profile.putMachineSetting('machine_name', 'ultimaker original')
598 profile.putMachineSetting('machine_type', 'ultimaker')
599 profile.putMachineSetting('machine_center_is_zero', 'False')
600 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
601 profile.putProfileSetting('nozzle_size', '0.4')
602 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
603 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
604 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
605 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
606 profile.putMachineSetting('extruder_head_size_height', '55.0')
607 elif self.UltimakerOPRadio.GetValue():
608 profile.putMachineSetting('machine_width', '205')
609 profile.putMachineSetting('machine_depth', '205')
610 profile.putMachineSetting('machine_height', '200')
611 profile.putMachineSetting('machine_name', 'ultimaker original+')
612 profile.putMachineSetting('machine_type', 'ultimaker_plus')
613 profile.putMachineSetting('machine_center_is_zero', 'False')
614 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
615 profile.putProfileSetting('nozzle_size', '0.4')
616 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
617 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
618 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
619 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
620 profile.putMachineSetting('extruder_head_size_height', '55.0')
621 profile.putMachineSetting('has_heated_bed', 'True')
622 profile.putMachineSetting('extruder_amount', '1')
623 profile.putProfileSetting('retraction_enable', 'True')
625 profile.putMachineSetting('machine_width', '80')
626 profile.putMachineSetting('machine_depth', '80')
627 profile.putMachineSetting('machine_height', '60')
628 profile.putMachineSetting('machine_name', 'reprap')
629 profile.putMachineSetting('machine_type', 'reprap')
630 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
631 profile.putPreference('startMode', 'Normal')
632 profile.putProfileSetting('nozzle_size', '0.5')
633 profile.checkAndUpdateMachineName()
634 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
636 class SelectParts(InfoPage):
637 def __init__(self, parent):
638 super(SelectParts, self).__init__(parent, _("Select upgraded parts you have"))
639 self.AddText(_("To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine."))
641 self.springExtruder = self.AddCheckbox(_("Extruder drive upgrade"))
642 self.heatedBedKit = self.AddCheckbox(_("Heated printer bed (kit)"))
643 self.heatedBed = self.AddCheckbox(_("Heated printer bed (self built)"))
644 self.dualExtrusion = self.AddCheckbox(_("Dual extrusion (experimental)"))
646 self.AddText(_("If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability."))
647 self.AddText(_("This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094"))
648 self.springExtruder.SetValue(True)
651 profile.putMachineSetting('ultimaker_extruder_upgrade', str(self.springExtruder.GetValue()))
652 if self.heatedBed.GetValue() or self.heatedBedKit.GetValue():
653 profile.putMachineSetting('has_heated_bed', 'True')
655 profile.putMachineSetting('has_heated_bed', 'False')
656 if self.dualExtrusion.GetValue():
657 profile.putMachineSetting('extruder_amount', '2')
658 profile.putMachineSetting('machine_depth', '195')
660 profile.putMachineSetting('extruder_amount', '1')
661 if profile.getMachineSetting('ultimaker_extruder_upgrade') == 'True':
662 profile.putProfileSetting('retraction_enable', 'True')
664 profile.putProfileSetting('retraction_enable', 'False')
667 class UltimakerFirmwareUpgradePage(InfoPage):
668 def __init__(self, parent):
669 super(UltimakerFirmwareUpgradePage, self).__init__(parent, _("Upgrade Ultimaker Firmware"))
670 self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the step motors, regulates the temperature\nand ultimately makes your printer work."))
671 self.AddHiddenSeperator()
672 self.AddText(_("The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier."))
673 self.AddHiddenSeperator()
674 self.AddText(_("Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now."))
675 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Upgrade to Marlin firmware'), _('Skip upgrade'))
676 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
677 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
678 self.AddHiddenSeperator()
679 if profile.getMachineSetting('machine_type') == 'ultimaker':
680 self.AddText(_("Do not upgrade to this firmware if:"))
681 self.AddText(_("* You have an older machine based on ATMega1280 (Rev 1 machine)"))
682 self.AddText(_("* Build your own heated bed"))
683 self.AddText(_("* Have other changes in the firmware"))
684 # button = self.AddButton('Goto this page for a custom firmware')
685 # button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
690 def OnUpgradeClick(self, e):
691 if firmwareInstall.InstallFirmware():
692 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
694 def OnSkipClick(self, e):
695 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
696 self.GetParent().ShowPage(self.GetNext())
698 def OnUrlClick(self, e):
699 webbrowser.open('http://marlinbuilder.robotfuzz.com/')
701 class UltimakerCheckupPage(InfoPage):
702 def __init__(self, parent):
703 super(UltimakerCheckupPage, self).__init__(parent, _("Ultimaker Checkup"))
705 self.checkBitmap = wx.Bitmap(resources.getPathForImage('checkmark.png'))
706 self.crossBitmap = wx.Bitmap(resources.getPathForImage('cross.png'))
707 self.unknownBitmap = wx.Bitmap(resources.getPathForImage('question.png'))
708 self.endStopNoneBitmap = wx.Bitmap(resources.getPathForImage('endstop_none.png'))
709 self.endStopXMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmin.png'))
710 self.endStopXMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmax.png'))
711 self.endStopYMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymin.png'))
712 self.endStopYMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymax.png'))
713 self.endStopZMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmin.png'))
714 self.endStopZMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmax.png'))
717 _("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
718 b1, b2 = self.AddDualButton(_("Run checks"), _("Skip checks"))
719 b1.Bind(wx.EVT_BUTTON, self.OnCheckClick)
720 b2.Bind(wx.EVT_BUTTON, self.OnSkipClick)
722 self.commState = self.AddCheckmark(_("Communication:"), self.unknownBitmap)
723 self.tempState = self.AddCheckmark(_("Temperature:"), self.unknownBitmap)
724 self.stopState = self.AddCheckmark(_("Endstops:"), self.unknownBitmap)
726 self.infoBox = self.AddInfoBox()
727 self.machineState = self.AddText("")
728 self.temperatureLabel = self.AddText("")
729 self.errorLogButton = self.AddButton(_("Show error log"))
730 self.errorLogButton.Show(False)
732 self.endstopBitmap = self.AddBitmap(self.endStopNoneBitmap)
734 self.xMinStop = False
735 self.xMaxStop = False
736 self.yMinStop = False
737 self.yMaxStop = False
738 self.zMinStop = False
739 self.zMaxStop = False
741 self.Bind(wx.EVT_BUTTON, self.OnErrorLog, self.errorLogButton)
744 if self.comm is not None:
748 self.endstopBitmap.Show(False)
751 def OnSkipClick(self, e):
752 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
753 self.GetParent().ShowPage(self.GetNext())
755 def OnCheckClick(self, e=None):
756 self.errorLogButton.Show(False)
757 if self.comm is not None:
761 wx.CallAfter(self.OnCheckClick)
763 self.infoBox.SetBusy(_("Connecting to machine."))
764 self.commState.SetBitmap(self.unknownBitmap)
765 self.tempState.SetBitmap(self.unknownBitmap)
766 self.stopState.SetBitmap(self.unknownBitmap)
767 self.checkupState = 0
768 self.checkExtruderNr = 0
769 self.comm = machineCom.MachineCom(callbackObject=self)
771 def OnErrorLog(self, e):
772 printWindow.LogWindow('\n'.join(self.comm.getLog()))
774 def mcLog(self, message):
777 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
778 if not self.comm.isOperational():
780 if self.checkupState == 0:
781 self.tempCheckTimeout = 20
782 if temp[self.checkExtruderNr] > 70:
783 self.checkupState = 1
784 wx.CallAfter(self.infoBox.SetInfo, _("Cooldown before temperature check."))
785 self.comm.sendCommand("M104 S0 T%d" % (self.checkExtruderNr))
786 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
788 self.startTemp = temp[self.checkExtruderNr]
789 self.checkupState = 2
790 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
791 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
792 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
793 elif self.checkupState == 1:
794 if temp[self.checkExtruderNr] < 60:
795 self.startTemp = temp[self.checkExtruderNr]
796 self.checkupState = 2
797 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
798 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
799 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
800 elif self.checkupState == 2:
801 #print "WARNING, TEMPERATURE TEST DISABLED FOR TESTING!"
802 if temp[self.checkExtruderNr] > self.startTemp + 40:
803 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
804 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
805 if self.checkExtruderNr < int(profile.getMachineSetting('extruder_amount')):
806 self.checkExtruderNr = 0
807 self.checkupState = 3
808 wx.CallAfter(self.infoBox.SetAttention, _("Please make sure none of the endstops are pressed."))
809 wx.CallAfter(self.endstopBitmap.Show, True)
810 wx.CallAfter(self.Layout)
811 self.comm.sendCommand('M119')
812 wx.CallAfter(self.tempState.SetBitmap, self.checkBitmap)
814 self.checkupState = 0
815 self.checkExtruderNr += 1
817 self.tempCheckTimeout -= 1
818 if self.tempCheckTimeout < 1:
819 self.checkupState = -1
820 wx.CallAfter(self.tempState.SetBitmap, self.crossBitmap)
821 wx.CallAfter(self.infoBox.SetError, _("Temperature measurement FAILED!"), 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
822 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
823 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
824 elif self.checkupState >= 3 and self.checkupState < 10:
825 self.comm.sendCommand('M119')
826 wx.CallAfter(self.temperatureLabel.SetLabel, _("Head temperature: %d") % (temp[self.checkExtruderNr]))
828 def mcStateChange(self, state):
829 if self.comm is None:
831 if self.comm.isOperational():
832 wx.CallAfter(self.commState.SetBitmap, self.checkBitmap)
833 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
834 elif self.comm.isError():
835 wx.CallAfter(self.commState.SetBitmap, self.crossBitmap)
836 wx.CallAfter(self.infoBox.SetError, _("Failed to establish connection with the printer."), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
837 wx.CallAfter(self.endstopBitmap.Show, False)
838 wx.CallAfter(self.machineState.SetLabel, '%s' % (self.comm.getErrorString()))
839 wx.CallAfter(self.errorLogButton.Show, True)
840 wx.CallAfter(self.Layout)
842 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
844 def mcMessage(self, message):
845 if self.checkupState >= 3 and self.checkupState < 10 and ('_min' in message or '_max' in message):
846 for data in message.split(' '):
848 tag, value = data.split(':', 1)
850 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
852 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
854 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
856 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
858 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
860 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
862 tag, value = map(str.strip, message.split(':', 1))
864 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
866 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
868 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
870 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
872 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
874 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
875 if 'z_max' in message:
876 self.comm.sendCommand('M119')
878 if self.checkupState == 3:
879 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
880 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
881 self.checkupState = 5
882 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
883 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
885 self.checkupState = 4
886 wx.CallAfter(self.infoBox.SetAttention, _("Please press the right X endstop."))
887 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMaxBitmap)
888 elif self.checkupState == 4:
889 if not self.xMinStop and self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
890 self.checkupState = 5
891 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
892 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
893 elif self.checkupState == 5:
894 if self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
895 self.checkupState = 6
896 wx.CallAfter(self.infoBox.SetAttention, _("Please press the front Y endstop."))
897 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMinBitmap)
898 elif self.checkupState == 6:
899 if not self.xMinStop and not self.xMaxStop and self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
900 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
901 self.checkupState = 8
902 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
903 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
905 self.checkupState = 7
906 wx.CallAfter(self.infoBox.SetAttention, _("Please press the back Y endstop."))
907 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMaxBitmap)
908 elif self.checkupState == 7:
909 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and self.yMaxStop and not self.zMinStop and not self.zMaxStop:
910 self.checkupState = 8
911 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
912 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
913 elif self.checkupState == 8:
914 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and self.zMinStop and not self.zMaxStop:
915 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
916 self.checkupState = 10
918 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
919 wx.CallAfter(self.infoBox.SetReadyIndicator)
920 wx.CallAfter(self.endstopBitmap.Show, False)
921 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
922 wx.CallAfter(self.OnSkipClick, None)
924 self.checkupState = 9
925 wx.CallAfter(self.infoBox.SetAttention, _("Please press the bottom Z endstop."))
926 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMaxBitmap)
927 elif self.checkupState == 9:
928 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and self.zMaxStop:
929 self.checkupState = 10
931 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
932 wx.CallAfter(self.infoBox.SetReadyIndicator)
933 wx.CallAfter(self.endstopBitmap.Show, False)
934 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
935 wx.CallAfter(self.OnSkipClick, None)
937 def mcProgress(self, lineNr):
940 def mcZChange(self, newZ):
944 class UltimakerCalibrationPage(InfoPage):
945 def __init__(self, parent):
946 super(UltimakerCalibrationPage, self).__init__(parent, _("Ultimaker Calibration"))
948 self.AddText("Your Ultimaker requires some calibration.")
949 self.AddText("This calibration is needed for a proper extrusion amount.")
951 self.AddText("The following values are needed:")
952 self.AddText("* Diameter of filament")
953 self.AddText("* Number of steps per mm of filament extrusion")
955 self.AddText("The better you have calibrated these values, the better your prints\nwill become.")
957 self.AddText("First we need the diameter of your filament:")
958 self.filamentDiameter = self.AddTextCtrl(profile.getProfileSetting('filament_diameter'))
960 "If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.")
961 self.AddText("Note: This value can be changed later at any time.")
964 profile.putProfileSetting('filament_diameter', self.filamentDiameter.GetValue())
967 class UltimakerCalibrateStepsPerEPage(InfoPage):
968 def __init__(self, parent):
969 super(UltimakerCalibrateStepsPerEPage, self).__init__(parent, _("Ultimaker Calibration"))
971 #if profile.getMachineSetting('steps_per_e') == '0':
972 # profile.putMachineSetting('steps_per_e', '865.888')
974 self.AddText(_("Calibrating the Steps Per E requires some manual actions."))
975 self.AddText(_("First remove any filament from your machine."))
976 self.AddText(_("Next put in your filament so the tip is aligned with the\ntop of the extruder drive."))
977 self.AddText(_("We'll push the filament 100mm"))
978 self.extrudeButton = self.AddButton(_("Extrude 100mm filament"))
979 self.AddText(_("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)"))
980 self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton("100", _("Save"))
981 self.AddText(_("This results in the following steps per E:"))
982 self.stepsPerEInput = self.AddTextCtrl(profile.getMachineSetting('steps_per_e'))
983 self.AddText(_("You can repeat these steps to get better calibration."))
986 _("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:"))
987 self.heatButton = self.AddButton(_("Heatup for filament removal"))
989 self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
990 self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
991 self.heatButton.Bind(wx.EVT_BUTTON, self.OnHeatClick)
993 def OnSaveLengthClick(self, e):
994 currentEValue = float(self.stepsPerEInput.GetValue())
995 realExtrudeLength = float(self.lengthInput.GetValue())
996 newEValue = currentEValue * 100 / realExtrudeLength
997 self.stepsPerEInput.SetValue(str(newEValue))
998 self.lengthInput.SetValue("100")
1000 def OnExtrudeClick(self, e):
1001 t = threading.Thread(target=self.OnExtrudeRun)
1005 def OnExtrudeRun(self):
1006 self.heatButton.Enable(False)
1007 self.extrudeButton.Enable(False)
1008 currentEValue = float(self.stepsPerEInput.GetValue())
1009 self.comm = machineCom.MachineCom()
1010 if not self.comm.isOpen():
1012 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1013 'Printer error', wx.OK | wx.ICON_INFORMATION)
1014 self.heatButton.Enable(True)
1015 self.extrudeButton.Enable(True)
1018 line = self.comm.readline()
1023 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1026 self.sendGCommand('M302') #Disable cold extrusion protection
1027 self.sendGCommand("M92 E%f" % (currentEValue))
1028 self.sendGCommand("G92 E0")
1029 self.sendGCommand("G1 E100 F600")
1032 self.extrudeButton.Enable()
1033 self.heatButton.Enable()
1035 def OnHeatClick(self, e):
1036 t = threading.Thread(target=self.OnHeatRun)
1040 def OnHeatRun(self):
1041 self.heatButton.Enable(False)
1042 self.extrudeButton.Enable(False)
1043 self.comm = machineCom.MachineCom()
1044 if not self.comm.isOpen():
1046 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1047 'Printer error', wx.OK | wx.ICON_INFORMATION)
1048 self.heatButton.Enable(True)
1049 self.extrudeButton.Enable(True)
1052 line = self.comm.readline()
1054 self.heatButton.Enable(True)
1055 self.extrudeButton.Enable(True)
1059 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1062 self.sendGCommand('M104 S200') #Set the temperature to 200C, should be enough to get PLA and ABS out.
1064 'Wait till you can remove the filament from the machine, and press OK.\n(Temperature is set to 200C)',
1065 'Machine heatup', wx.OK | wx.ICON_INFORMATION)
1066 self.sendGCommand('M104 S0')
1069 self.heatButton.Enable(True)
1070 self.extrudeButton.Enable(True)
1072 def sendGCommand(self, cmd):
1073 self.comm.sendCommand(cmd) #Disable cold extrusion protection
1075 line = self.comm.readline()
1078 if line.startswith('ok'):
1081 def StoreData(self):
1082 profile.putPreference('steps_per_e', self.stepsPerEInput.GetValue())
1084 class Ultimaker2ReadyPage(InfoPage):
1085 def __init__(self, parent):
1086 super(Ultimaker2ReadyPage, self).__init__(parent, _("Ultimaker2"))
1087 self.AddText(_('Congratulations on your the purchase of your brand new Ultimaker2.'))
1088 self.AddText(_('Cura is now ready to be used with your Ultimaker2.'))
1091 class LulzbotMachineSelectPage(InfoPage):
1095 def __init__(self, parent):
1096 super(LulzbotMachineSelectPage, self).__init__(parent, _("Select your machine"))
1097 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1098 self.AddText(_("Select your printer :"))
1100 self.panel = self.AddPanel()
1102 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1103 self.LulzbotMini = self.AddImageButton(self.panel, 0, 0, _("LulzBot Mini"),
1104 'Lulzbot_mini.jpg', image_size, style=ImageButton.IB_GROUP)
1105 self.LulzbotMini.OnSelected(self.OnLulzbotMiniSelected)
1106 self.LulzbotMini.SetValue(True)
1107 self.LulzbotTaz5 = self.AddImageButton(self.panel, 0, 1, _("LulzBot TAZ 5"),
1108 'Lulzbot_TAZ5.png', image_size)
1109 self.LulzbotTaz5.OnSelected(self.OnLulzbotTazSelected)
1110 self.LulzbotTaz4 = self.AddImageButton(self.panel, 1, 0, _("LulzBot TAZ 4"),
1111 'Lulzbot_TAZ4.jpg', image_size)
1112 self.LulzbotTaz4.OnSelected(self.OnLulzbotTazSelected)
1113 self.OtherPrinters = self.AddImageButton(self.panel, 1, 1, _("Other Printers"),
1114 'Generic-3D-Printer.png', image_size)
1115 self.OtherPrinters.OnSelected(self.OnOthersSelected)
1117 def OnOthersSelected(self):
1118 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().machineSelectPage)
1120 def OnLulzbotMiniSelected(self):
1121 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotMiniToolheadPage)
1122 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotMiniToolheadPage,
1123 self.GetParent().lulzbotReadyPage)
1125 def OnLulzbotTazSelected(self):
1126 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazHotendPage)
1128 def AllowNext(self):
1131 def AllowBack(self):
1134 def StoreData(self):
1135 if self.LulzbotTaz4.GetValue() or self.LulzbotTaz5.GetValue() or self.LulzbotMini.GetValue():
1136 if self.LulzbotTaz4.GetValue():
1137 # Nozzle size will be set in the toolhead selection page
1138 # We set the machine_type here so later pages can differenciate between TAZ 4 and 5
1139 profile.putMachineSetting('machine_width', '290')
1140 profile.putMachineSetting('machine_depth', '275')
1141 profile.putMachineSetting('machine_height', '250')
1142 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4')
1143 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
1144 profile.putMachineSetting('serial_baud', '115200')
1145 elif self.LulzbotTaz5.GetValue():
1146 # Nozzle size will be set in the toolhead selection page
1147 # We set the machine_type here so later pages can differenciate between TAZ 4 and 5
1148 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
1149 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5')
1150 profile.putMachineSetting('machine_width', '290')
1151 profile.putMachineSetting('machine_depth', '275')
1152 profile.putMachineSetting('machine_height', '250')
1153 profile.putMachineSetting('serial_baud', '115200')
1155 # Nozzle size and machine type will be set in the toolhead selection page
1156 profile.putMachineSetting('machine_name', 'LulzBot Mini')
1157 profile.putMachineSetting('machine_width', '155')
1158 profile.putMachineSetting('machine_depth', '155')
1159 profile.putMachineSetting('machine_height', '163')
1160 profile.putMachineSetting('serial_baud', '115200')
1161 profile.putMachineSetting('extruder_head_size_min_x', '40')
1162 profile.putMachineSetting('extruder_head_size_max_x', '75')
1163 profile.putMachineSetting('extruder_head_size_min_y', '25')
1164 profile.putMachineSetting('extruder_head_size_max_y', '55')
1165 profile.putMachineSetting('extruder_head_size_height', '17')
1167 profile.putMachineSetting('machine_center_is_zero', 'False')
1168 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
1169 profile.putMachineSetting('has_heated_bed', 'True')
1170 profile.putMachineSetting('extruder_head_size_min_x', '0.0')
1171 profile.putMachineSetting('extruder_head_size_min_y', '0.0')
1172 profile.putMachineSetting('extruder_head_size_max_x', '0.0')
1173 profile.putMachineSetting('extruder_head_size_max_y', '0.0')
1174 profile.putMachineSetting('extruder_head_size_height', '0.0')
1175 profile.putProfileSetting('retraction_enable', 'True')
1176 profile.putPreference('startMode', 'Simple')
1177 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
1178 profile.checkAndUpdateMachineName()
1180 class LulzbotReadyPage(InfoPage):
1181 def __init__(self, parent):
1182 super(LulzbotReadyPage, self).__init__(parent, _("LulzBot TAZ/Mini"))
1183 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1184 self.AddText(_('Cura is now ready to be used with your LulzBot 3D printer.'))
1186 self.AddText(_('For more information about using Cura with your LulzBot'))
1187 self.AddText(_('3D printer, please visit www.LulzBot.com/cura'))
1190 class LulzbotToolheadSelectPage(InfoPage):
1191 url='http://lulzbot.com/toolhead-identification'
1193 def __init__(self, parent, title):
1194 super(LulzbotToolheadSelectPage, self).__init__(parent, title)
1196 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Lulzbot_logo.png')))
1198 self.AddText(_('Please select your currently installed Tool Head'))
1199 txt = self.AddText(_('WARNING: Carefully select the right Tool Head.\nFlashing the firmware with the wrong Tool Head can damage your LulzBot printer. Learn more here :'))
1200 txt.SetForegroundColour(wx.RED)
1201 button = self.AddButton(self.url)
1202 button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
1206 def OnUrlClick(self, e):
1207 webbrowser.open(LulzbotMiniToolheadSelectPage.url)
1209 class LulzbotMiniToolheadSelectPage(LulzbotToolheadSelectPage):
1210 def __init__(self, parent, allowBack = True):
1211 super(LulzbotMiniToolheadSelectPage, self).__init__(parent, _("LulzBot Mini Toolhead Selection"))
1213 self.allowBack = allowBack
1214 self.panel = self.AddPanel()
1215 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1216 self.standard = self.AddImageButton(self.panel, 0, 0, _('Single Extruder v2'),
1217 'Lulzbot_Toolhead_Mini_Standard.jpg', image_size,
1218 style=ImageButton.IB_GROUP)
1219 self.flexy = self.AddImageButton(self.panel, 0, 1, _('Flexystruder v2'),
1220 'Lulzbot_Toolhead_Mini_Flexystruder.jpg', image_size)
1221 self.standard.SetValue(True)
1223 def AllowBack(self):
1224 return self.allowBack
1226 def StoreData(self):
1227 if self.standard.GetValue():
1228 profile.putProfileSetting('nozzle_size', '0.5')
1229 profile.putMachineSetting('extruder_amount', '1')
1230 profile.putMachineSetting('toolhead', 'Single Extruder V2')
1231 profile.putMachineSetting('toolhead_shortname', '')
1232 profile.putMachineSetting('machine_type', 'lulzbot_mini')
1234 profile.putProfileSetting('nozzle_size', '0.6')
1235 profile.putMachineSetting('extruder_amount', '1')
1236 profile.putMachineSetting('toolhead', 'Flexystruder V2')
1237 profile.putMachineSetting('toolhead_shortname', 'Flexy')
1238 profile.putMachineSetting('machine_type', 'lulzbot_mini_flexystruder')
1241 class LulzbotTazToolheadSelectPage(LulzbotToolheadSelectPage):
1242 def __init__(self, parent):
1243 super(LulzbotTazToolheadSelectPage, self).__init__(parent, _("LulzBot TAZ Toolhead Selection"))
1245 self.panel = self.AddPanel()
1246 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1247 self.single = self.AddImageButton(self.panel, 0, 0, _('Single Extruder v1'),
1248 'Lulzbot_Toolhead_TAZ_Single_v1.jpg', image_size,
1249 style=ImageButton.IB_GROUP)
1250 self.flexy = self.AddImageButton(self.panel, 0, 1, _('Flexystruder v1'),
1251 'Lulzbot_Toolhead_TAZ_Flexystruder_v1.jpg', image_size)
1252 self.dually = self.AddImageButton(self.panel, 1, 0, _('Dual Extruder v1'),
1253 'Lulzbot_Toolhead_TAZ_Dually_v1.jpg', image_size)
1254 self.flexydually = self.AddImageButton(self.panel, 1, 1, _('FlexyDually v1'),
1255 'Lulzbot_Toolhead_TAZ_FlexyDually_v1.jpg', image_size)
1257 self.single.SetValue(True)
1259 def SetVersion(self, version):
1260 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1261 self.single.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Single_v%d.jpg' % version, image_size))
1262 self.single.SetLabel(_('Single Extruder v%d' % version))
1263 self.flexy.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Flexystruder_v%d.jpg' % version, image_size))
1264 self.flexy.SetLabel(_('Flexystruder v%d' % version))
1265 self.dually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Dually_v%d.jpg' % version, image_size))
1266 self.dually.SetLabel(_('Dual Extruder v%d' % version))
1267 self.flexydually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_FlexyDually_v%d.jpg' % version, image_size))
1268 self.flexydually.SetLabel(_('FlexyDually v%d' % version))
1269 self.version = version
1271 self.single.OnSelected(None)
1272 self.flexy.OnSelected(None)
1273 self.dually.OnSelected(None)
1274 self.flexydually.OnSelected(None)
1275 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1277 self.single.OnSelected(self.OnSingleV2)
1278 self.flexy.OnSelected(self.OnNonSingle)
1279 self.dually.OnSelected(self.OnNonSingle)
1280 self.flexydually.OnSelected(self.OnNonSingle)
1281 if self.single.GetValue():
1282 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1283 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotReadyPage)
1285 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1287 def OnSingleV2(self):
1288 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1289 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotReadyPage)
1291 def OnNonSingle(self):
1292 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1294 def StoreData(self):
1295 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1299 version = (taz_version, self.version)
1300 if self.single.GetValue():
1301 profile.putProfileSetting('nozzle_size', '0.5' if self.version == 2 else '0.35')
1302 profile.putMachineSetting('extruder_amount', '1')
1303 profile.putMachineSetting('toolhead', 'Single Extruder V%d' % self.version)
1304 profile.putMachineSetting('toolhead_shortname', '')
1305 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_SingleV%d' % version)
1306 elif self.flexy.GetValue():
1307 profile.putProfileSetting('nozzle_size', '0.6')
1308 profile.putMachineSetting('extruder_amount', '1')
1309 profile.putMachineSetting('toolhead', 'Flexystruder V%d' % self.version)
1310 profile.putMachineSetting('toolhead_shortname', 'Flexy v%d' % self.version)
1311 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexystruderV%d' % version)
1312 elif self.dually.GetValue():
1313 profile.putProfileSetting('nozzle_size', '0.5')
1314 profile.putMachineSetting('extruder_amount', '2')
1315 profile.putMachineSetting('toolhead', 'Dual Extruder V%d' % self.version)
1316 profile.putMachineSetting('toolhead_shortname', 'Dually v%d' % self.version)
1317 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_DuallyV%d' % version)
1318 elif self.flexydually.GetValue():
1319 profile.putProfileSetting('nozzle_size', '0.6')
1320 profile.putMachineSetting('extruder_amount', '2')
1321 profile.putMachineSetting('toolhead', 'FlexyDually V%d' % self.version)
1322 profile.putMachineSetting('toolhead_shortname', 'FlexyDually v%d' % self.version)
1323 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexyDuallyV%d' % version)
1326 class LulzbotHotendSelectPage(LulzbotToolheadSelectPage):
1327 def __init__(self, parent, allowBack = True):
1328 super(LulzbotHotendSelectPage, self).__init__(parent, _("LulzBot Toolhead Hotend Selection"))
1330 self.allowBack = allowBack
1331 self.panel = self.AddPanel()
1332 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1333 self.v1 = self.AddImageButton(self.panel, 0, 0, _('v1 (Budaschnozzle Hotends)'),
1334 'Lulzbot_Toolhead_v1.jpg', image_size,
1335 style=ImageButton.IB_GROUP)
1336 self.v2 = self.AddImageButton(self.panel, 0, 1, _('v2 (Hexagon Hotends)'),
1337 'Lulzbot_Toolhead_v2.jpg', image_size)
1338 self.v1.SetValue(True)
1340 def AllowBack(self):
1341 return self.allowBack
1343 def StoreData(self):
1344 self.GetParent().lulzbotTazToolheadPage.SetVersion(1 if self.v1.GetValue() else 2)
1346 class LulzbotTaz5NozzleSelectPage(LulzbotToolheadSelectPage):
1347 url2='http://lulzbot.com/printer-identification'
1349 def __init__(self, parent):
1350 super(LulzbotTaz5NozzleSelectPage, self).__init__(parent, _("LulzBot TAZ Single V2 Nozzle Selection"))
1352 self.AddText(_('Please select your Hexagon hotend\'s nozzle size:'))
1353 self.Nozzle35Radio = self.AddRadioButton("0.35 mm", style=wx.RB_GROUP)
1354 self.Nozzle35Radio.SetValue(True)
1355 self.Nozzle50Radio = self.AddRadioButton("0.5 mm")
1356 self.AddText(_(' '))
1359 self.AddText(_('If you are not sure which nozzle size you have'))
1360 self.AddText(_('please check this webpage: '))
1361 button = self.AddButton(LulzbotTaz5NozzleSelectPage.url2)
1362 button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
1364 def OnUrlClick(self, e):
1365 webbrowser.open(LulzbotTaz5NozzleSelectPage.url2)
1367 def StoreData(self):
1368 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1372 if self.Nozzle35Radio.GetValue():
1373 profile.putProfileSetting('nozzle_size', '0.35')
1374 profile.putMachineSetting('toolhead', 'Single Extruder V2 (0.35mm nozzle)')
1375 profile.putMachineSetting('toolhead_shortname', '0.35 nozzle')
1376 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_035nozzle' % taz_version)
1379 profile.putProfileSetting('nozzle_size', '0.5')
1380 profile.putMachineSetting('toolhead', 'Single Extruder V2 (0.5mm nozzle)')
1381 profile.putMachineSetting('toolhead_shortname', '0.5 nozzle')
1382 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_05nozzle' % taz_version)
1384 class LulzbotChangeToolheadWizard(wx.wizard.Wizard):
1386 super(LulzbotChangeToolheadWizard, self).__init__(None, -1, _("Change Lulzbot Toolhead Wizard"))
1388 self._nozzle_size = profile.getProfileSettingFloat('nozzle_size')
1389 self._machine_name = profile.getMachineSetting('machine_name')
1390 self._machine_type = profile.getMachineSetting('machine_type')
1391 self._extruder_amount = int(profile.getMachineSettingFloat('extruder_amount'))
1393 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1394 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1395 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1397 self.lulzbotReadyPage = LulzbotReadyPage(self)
1398 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self, False)
1399 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1400 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self, False)
1401 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1403 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage)
1404 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1406 if profile.getMachineSetting('machine_type').startswith('lulzbot_mini'):
1407 self.RunWizard(self.lulzbotMiniToolheadPage)
1409 self.RunWizard(self.lulzbotTazHotendPage)
1412 def OnPageChanging(self, e):
1413 e.GetPage().StoreData()
1415 def OnPageChanged(self, e):
1416 if e.GetPage().AllowNext():
1417 self.FindWindowById(wx.ID_FORWARD).Enable()
1419 self.FindWindowById(wx.ID_FORWARD).Disable()
1420 if e.GetPage().AllowBack():
1421 self.FindWindowById(wx.ID_BACKWARD).Enable()
1423 self.FindWindowById(wx.ID_BACKWARD).Disable()
1425 def OnCancel(self, e):
1426 profile.putProfileSetting('nozzle_size', self._nozzle_size)
1427 profile.putMachineSetting('machine_name', self._machine_name)
1428 profile.putMachineSetting('machine_type', self._machine_type)
1429 profile.putMachineSetting('extruder_amount', self._extruder_amount)
1431 class ConfigWizard(wx.wizard.Wizard):
1432 def __init__(self, addNew = False):
1433 super(ConfigWizard, self).__init__(None, -1, _("Configuration Wizard"))
1435 self._old_machine_index = int(profile.getPreferenceFloat('active_machine'))
1437 profile.setActiveMachine(profile.getMachineCount())
1439 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1440 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1441 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1443 self.machineSelectPage = MachineSelectPage(self)
1444 self.ultimakerSelectParts = SelectParts(self)
1445 self.ultimakerFirmwareUpgradePage = UltimakerFirmwareUpgradePage(self)
1446 self.ultimakerCheckupPage = UltimakerCheckupPage(self)
1447 self.ultimakerCalibrationPage = UltimakerCalibrationPage(self)
1448 self.ultimakerCalibrateStepsPerEPage = UltimakerCalibrateStepsPerEPage(self)
1449 self.bedLevelPage = bedLevelWizardMain(self)
1450 self.headOffsetCalibration = headOffsetCalibrationPage(self)
1451 self.printrbotSelectType = PrintrbotPage(self)
1452 self.otherMachineSelectPage = OtherMachineSelectPage(self)
1453 self.customRepRapInfoPage = CustomRepRapInfoPage(self)
1454 self.otherMachineInfoPage = OtherMachineInfoPage(self)
1456 self.ultimaker2ReadyPage = Ultimaker2ReadyPage(self)
1457 self.lulzbotReadyPage = LulzbotReadyPage(self)
1458 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self)
1459 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1460 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self)
1461 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1462 self.lulzbotMachineSelectPage = LulzbotMachineSelectPage(self)
1464 wx.wizard.WizardPageSimple.Chain(self.lulzbotMachineSelectPage, self.lulzbotMiniToolheadPage)
1465 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage)
1466 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1467 wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.ultimakerSelectParts)
1468 wx.wizard.WizardPageSimple.Chain(self.ultimakerSelectParts, self.ultimakerFirmwareUpgradePage)
1469 wx.wizard.WizardPageSimple.Chain(self.ultimakerFirmwareUpgradePage, self.ultimakerCheckupPage)
1470 wx.wizard.WizardPageSimple.Chain(self.ultimakerCheckupPage, self.bedLevelPage)
1471 wx.wizard.WizardPageSimple.Chain(self.printrbotSelectType, self.otherMachineInfoPage)
1472 wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
1474 self.RunWizard(self.lulzbotMachineSelectPage)
1477 def OnPageChanging(self, e):
1478 e.GetPage().StoreData()
1480 def OnPageChanged(self, e):
1481 if e.GetPage().AllowNext():
1482 self.FindWindowById(wx.ID_FORWARD).Enable()
1484 self.FindWindowById(wx.ID_FORWARD).Disable()
1485 if e.GetPage().AllowBack():
1486 self.FindWindowById(wx.ID_BACKWARD).Enable()
1488 self.FindWindowById(wx.ID_BACKWARD).Disable()
1490 def OnCancel(self, e):
1491 new_machine_index = int(profile.getPreferenceFloat('active_machine'))
1492 profile.setActiveMachine(self._old_machine_index)
1493 profile.removeMachine(new_machine_index)
1495 class bedLevelWizardMain(InfoPage):
1496 def __init__(self, parent):
1497 super(bedLevelWizardMain, self).__init__(parent, _("Bed leveling wizard"))
1499 self.AddText(_('This wizard will help you in leveling your printer bed'))
1501 self.AddText(_('It will do the following steps'))
1502 self.AddText(_('* Move the printer head to each corner'))
1503 self.AddText(_(' and let you adjust the height of the bed to the nozzle'))
1504 self.AddText(_('* Print a line around the bed to check if it is level'))
1507 self.connectButton = self.AddButton(_('Connect to printer'))
1510 self.infoBox = self.AddInfoBox()
1511 self.resumeButton = self.AddButton(_('Resume'))
1512 self.upButton, self.downButton = self.AddDualButton(_('Up 0.2mm'), _('Down 0.2mm'))
1513 self.upButton2, self.downButton2 = self.AddDualButton(_('Up 10mm'), _('Down 10mm'))
1514 self.resumeButton.Enable(False)
1516 self.upButton.Enable(False)
1517 self.downButton.Enable(False)
1518 self.upButton2.Enable(False)
1519 self.downButton2.Enable(False)
1521 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1522 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1523 self.Bind(wx.EVT_BUTTON, self.OnBedUp, self.upButton)
1524 self.Bind(wx.EVT_BUTTON, self.OnBedDown, self.downButton)
1525 self.Bind(wx.EVT_BUTTON, self.OnBedUp2, self.upButton2)
1526 self.Bind(wx.EVT_BUTTON, self.OnBedDown2, self.downButton2)
1528 def OnConnect(self, e = None):
1529 if self.comm is not None:
1533 wx.CallAfter(self.OnConnect)
1535 self.connectButton.Enable(False)
1536 self.comm = machineCom.MachineCom(callbackObject=self)
1537 self.infoBox.SetBusy(_('Connecting to machine.'))
1538 self._wizardState = 0
1540 def OnBedUp(self, e):
1541 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1542 self.comm.sendCommand('G92 Z10')
1543 self.comm.sendCommand('G1 Z9.8 F%d' % (feedZ))
1544 self.comm.sendCommand('M400')
1546 def OnBedDown(self, e):
1547 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1548 self.comm.sendCommand('G92 Z10')
1549 self.comm.sendCommand('G1 Z10.2 F%d' % (feedZ))
1550 self.comm.sendCommand('M400')
1552 def OnBedUp2(self, e):
1553 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1554 self.comm.sendCommand('G92 Z10')
1555 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1556 self.comm.sendCommand('M400')
1558 def OnBedDown2(self, e):
1559 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1560 self.comm.sendCommand('G92 Z10')
1561 self.comm.sendCommand('G1 Z20 F%d' % (feedZ))
1562 self.comm.sendCommand('M400')
1564 def AllowNext(self):
1565 if self.GetParent().headOffsetCalibration is not None and int(profile.getMachineSetting('extruder_amount')) > 1:
1566 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().headOffsetCalibration)
1569 def OnResume(self, e):
1570 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1571 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1572 if self._wizardState == -1:
1573 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer...'))
1574 wx.CallAfter(self.upButton.Enable, False)
1575 wx.CallAfter(self.downButton.Enable, False)
1576 wx.CallAfter(self.upButton2.Enable, False)
1577 wx.CallAfter(self.downButton2.Enable, False)
1578 self.comm.sendCommand('M105')
1579 self.comm.sendCommand('G28')
1580 self._wizardState = 1
1581 elif self._wizardState == 2:
1582 if profile.getMachineSetting('has_heated_bed') == 'True':
1583 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back center...'))
1584 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1585 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') / 2.0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1586 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1587 self.comm.sendCommand('M400')
1588 self._wizardState = 3
1590 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back left corner...'))
1591 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1592 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1593 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1594 self.comm.sendCommand('M400')
1595 self._wizardState = 3
1596 elif self._wizardState == 4:
1597 if profile.getMachineSetting('has_heated_bed') == 'True':
1598 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1599 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1600 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 5, feedTravel))
1601 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1602 self.comm.sendCommand('M400')
1603 self._wizardState = 7
1605 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back right corner...'))
1606 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1607 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, profile.getMachineSettingFloat('machine_depth') - 25, feedTravel))
1608 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1609 self.comm.sendCommand('M400')
1610 self._wizardState = 5
1611 elif self._wizardState == 6:
1612 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1613 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1614 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 20, feedTravel))
1615 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1616 self.comm.sendCommand('M400')
1617 self._wizardState = 7
1618 elif self._wizardState == 8:
1619 wx.CallAfter(self.infoBox.SetBusy, _('Heating up printer...'))
1620 self.comm.sendCommand('G1 Z15 F%d' % (feedZ))
1621 self.comm.sendCommand('M104 S%d' % (profile.getProfileSettingFloat('print_temperature')))
1622 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, 0, feedTravel))
1623 self._wizardState = 9
1624 elif self._wizardState == 10:
1625 self._wizardState = 11
1626 wx.CallAfter(self.infoBox.SetInfo, _('Printing a square on the printer bed at 0.3mm height.'))
1627 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1628 feedPrint = profile.getProfileSettingFloat('print_speed') * 60
1629 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1630 w = profile.getMachineSettingFloat('machine_width') - 10
1631 d = profile.getMachineSettingFloat('machine_depth')
1632 filamentRadius = profile.getProfileSettingFloat('filament_diameter') / 2
1633 filamentArea = math.pi * filamentRadius * filamentRadius
1634 ePerMM = (profile.calculateEdgeWidth() * 0.3) / filamentArea
1638 'G1 Z2 F%d' % (feedZ),
1640 'G1 X%d Y%d F%d' % (5, 5, feedTravel),
1641 'G1 Z0.3 F%d' % (feedZ)]
1643 gcodeList.append('G1 E%f F%d' % (eValue, profile.getProfileSettingFloat('retraction_speed') * 60))
1645 for i in xrange(0, 3):
1646 dist = 5.0 + 0.4 * float(i)
1647 eValue += (d - 2.0*dist) * ePerMM
1648 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, d - dist, eValue, feedPrint))
1649 eValue += (w - 2.0*dist) * ePerMM
1650 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, d - dist, eValue, feedPrint))
1651 eValue += (d - 2.0*dist) * ePerMM
1652 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, dist, eValue, feedPrint))
1653 eValue += (w - 2.0*dist) * ePerMM
1654 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, dist, eValue, feedPrint))
1656 gcodeList.append('M400')
1657 self.comm.printGCode(gcodeList)
1658 self.resumeButton.Enable(False)
1660 def mcLog(self, message):
1661 print 'Log:', message
1663 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1664 if self._wizardState == 1:
1665 self._wizardState = 2
1666 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front left screw of your printer bed\nSo the nozzle just hits the bed.'))
1667 wx.CallAfter(self.resumeButton.Enable, True)
1668 elif self._wizardState == 3:
1669 self._wizardState = 4
1670 if profile.getMachineSetting('has_heated_bed') == 'True':
1671 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back screw of your printer bed\nSo the nozzle just hits the bed.'))
1673 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back left screw of your printer bed\nSo the nozzle just hits the bed.'))
1674 wx.CallAfter(self.resumeButton.Enable, True)
1675 elif self._wizardState == 5:
1676 self._wizardState = 6
1677 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back right screw of your printer bed\nSo the nozzle just hits the bed.'))
1678 wx.CallAfter(self.resumeButton.Enable, True)
1679 elif self._wizardState == 7:
1680 self._wizardState = 8
1681 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front right screw of your printer bed\nSo the nozzle just hits the bed.'))
1682 wx.CallAfter(self.resumeButton.Enable, True)
1683 elif self._wizardState == 9:
1684 if temp[0] < profile.getProfileSettingFloat('print_temperature') - 5:
1685 wx.CallAfter(self.infoBox.SetInfo, _('Heating up printer: %d/%d') % (temp[0], profile.getProfileSettingFloat('print_temperature')))
1687 wx.CallAfter(self.infoBox.SetAttention, _('The printer is hot now. Please insert some PLA filament into the printer.'))
1688 wx.CallAfter(self.resumeButton.Enable, True)
1689 self._wizardState = 10
1691 def mcStateChange(self, state):
1692 if self.comm is None:
1694 if self.comm.isOperational():
1695 if self._wizardState == 0:
1696 wx.CallAfter(self.infoBox.SetAttention, _('Use the up/down buttons to move the bed and adjust your Z endstop.'))
1697 wx.CallAfter(self.upButton.Enable, True)
1698 wx.CallAfter(self.downButton.Enable, True)
1699 wx.CallAfter(self.upButton2.Enable, True)
1700 wx.CallAfter(self.downButton2.Enable, True)
1701 wx.CallAfter(self.resumeButton.Enable, True)
1702 self._wizardState = -1
1703 elif self._wizardState == 11 and not self.comm.isPrinting():
1704 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1705 self.comm.sendCommand('G92 E0')
1706 self.comm.sendCommand('G1 E-10 F%d' % (profile.getProfileSettingFloat('retraction_speed') * 60))
1707 self.comm.sendCommand('M104 S0')
1708 wx.CallAfter(self.infoBox.SetInfo, _('Calibration finished.\nThe squares on the bed should slightly touch each other.'))
1709 wx.CallAfter(self.infoBox.SetReadyIndicator)
1710 wx.CallAfter(self.GetParent().FindWindowById(wx.ID_FORWARD).Enable)
1711 wx.CallAfter(self.connectButton.Enable, True)
1712 self._wizardState = 12
1713 elif self.comm.isError():
1714 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1716 def mcMessage(self, message):
1719 def mcProgress(self, lineNr):
1722 def mcZChange(self, newZ):
1725 class headOffsetCalibrationPage(InfoPage):
1726 def __init__(self, parent):
1727 super(headOffsetCalibrationPage, self).__init__(parent, _("Printer head offset calibration"))
1729 self.AddText(_('This wizard will help you in calibrating the printer head offsets of your dual extrusion machine'))
1732 self.connectButton = self.AddButton(_('Connect to printer'))
1735 self.infoBox = self.AddInfoBox()
1736 self.textEntry = self.AddTextCtrl('')
1737 self.textEntry.Enable(False)
1738 self.resumeButton = self.AddButton(_('Resume'))
1739 self.resumeButton.Enable(False)
1741 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1742 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1744 def AllowBack(self):
1747 def OnConnect(self, e = None):
1748 if self.comm is not None:
1752 wx.CallAfter(self.OnConnect)
1754 self.connectButton.Enable(False)
1755 self.comm = machineCom.MachineCom(callbackObject=self)
1756 self.infoBox.SetBusy(_('Connecting to machine.'))
1757 self._wizardState = 0
1759 def OnResume(self, e):
1760 if self._wizardState == 2:
1761 self._wizardState = 3
1762 wx.CallAfter(self.infoBox.SetBusy, _('Printing initial calibration cross'))
1764 w = profile.getMachineSettingFloat('machine_width')
1765 d = profile.getMachineSettingFloat('machine_depth')
1767 gcode = gcodeGenerator.gcodeGenerator()
1768 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1769 gcode.setPrintSpeed(profile.getProfileSettingFloat('bottom_layer_speed'))
1776 gcode.addMove(w/2, 5)
1777 gcode.addMove(z=0.2)
1779 gcode.addExtrude(w/2, d-5.0)
1781 gcode.addMove(5, d/2)
1783 gcode.addExtrude(w-5.0, d/2)
1784 gcode.addRetract(15)
1787 gcode.addMove(w/2, 5)
1789 gcode.addExtrude(w/2, d-5.0)
1791 gcode.addMove(5, d/2)
1793 gcode.addExtrude(w-5.0, d/2)
1794 gcode.addRetract(15)
1799 gcode.addCmd('M400')
1801 self.comm.printGCode(gcode.list())
1802 self.resumeButton.Enable(False)
1803 elif self._wizardState == 4:
1805 float(self.textEntry.GetValue())
1808 profile.putPreference('extruder_offset_x1', self.textEntry.GetValue())
1809 self._wizardState = 5
1810 self.infoBox.SetAttention(_('Please measure the distance between the horizontal lines in millimeters.'))
1811 self.textEntry.SetValue('0.0')
1812 self.textEntry.Enable(True)
1813 elif self._wizardState == 5:
1815 float(self.textEntry.GetValue())
1818 profile.putPreference('extruder_offset_y1', self.textEntry.GetValue())
1819 self._wizardState = 6
1820 self.infoBox.SetBusy(_('Printing the fine calibration lines.'))
1821 self.textEntry.SetValue('')
1822 self.textEntry.Enable(False)
1823 self.resumeButton.Enable(False)
1825 x = profile.getMachineSettingFloat('extruder_offset_x1')
1826 y = profile.getMachineSettingFloat('extruder_offset_y1')
1827 gcode = gcodeGenerator.gcodeGenerator()
1828 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1829 gcode.setPrintSpeed(25)
1832 gcode.addMove(50, 40, 0.2)
1834 for n in xrange(0, 10):
1835 gcode.addExtrude(50 + n * 10, 150)
1836 gcode.addExtrude(50 + n * 10 + 5, 150)
1837 gcode.addExtrude(50 + n * 10 + 5, 40)
1838 gcode.addExtrude(50 + n * 10 + 10, 40)
1839 gcode.addMove(40, 50)
1840 for n in xrange(0, 10):
1841 gcode.addExtrude(150, 50 + n * 10)
1842 gcode.addExtrude(150, 50 + n * 10 + 5)
1843 gcode.addExtrude(40, 50 + n * 10 + 5)
1844 gcode.addExtrude(40, 50 + n * 10 + 10)
1845 gcode.addRetract(15)
1848 gcode.addMove(50 - x, 30 - y, 0.2)
1850 for n in xrange(0, 10):
1851 gcode.addExtrude(50 + n * 10.2 - 1.0 - x, 140 - y)
1852 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 140 - y)
1853 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 30 - y)
1854 gcode.addExtrude(50 + n * 10.2 - 1.0 + 10 - x, 30 - y)
1855 gcode.addMove(30 - x, 50 - y, 0.2)
1856 for n in xrange(0, 10):
1857 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 - y)
1858 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1859 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1860 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 10 - y)
1861 gcode.addRetract(15)
1863 gcode.addCmd('M400')
1864 gcode.addCmd('M104 T0 S0')
1865 gcode.addCmd('M104 T1 S0')
1866 self.comm.printGCode(gcode.list())
1867 elif self._wizardState == 7:
1869 n = int(self.textEntry.GetValue()) - 1
1872 x = profile.getMachineSettingFloat('extruder_offset_x1')
1874 profile.putPreference('extruder_offset_x1', '%0.2f' % (x))
1875 self.infoBox.SetAttention(_('Which horizontal line number lays perfect on top of each other? Front most line is zero.'))
1876 self.textEntry.SetValue('10')
1877 self._wizardState = 8
1878 elif self._wizardState == 8:
1880 n = int(self.textEntry.GetValue()) - 1
1883 y = profile.getMachineSettingFloat('extruder_offset_y1')
1885 profile.putPreference('extruder_offset_y1', '%0.2f' % (y))
1886 self.infoBox.SetInfo(_('Calibration finished. Offsets are: %s %s') % (profile.getMachineSettingFloat('extruder_offset_x1'), profile.getMachineSettingFloat('extruder_offset_y1')))
1887 self.infoBox.SetReadyIndicator()
1888 self._wizardState = 8
1890 self.resumeButton.Enable(False)
1892 def mcLog(self, message):
1893 print 'Log:', message
1895 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1896 if self._wizardState == 1:
1897 if temp[0] >= 210 and temp[1] >= 210:
1898 self._wizardState = 2
1899 wx.CallAfter(self.infoBox.SetAttention, _('Please load both extruders with PLA.'))
1900 wx.CallAfter(self.resumeButton.Enable, True)
1901 wx.CallAfter(self.resumeButton.SetFocus)
1903 def mcStateChange(self, state):
1904 if self.comm is None:
1906 if self.comm.isOperational():
1907 if self._wizardState == 0:
1908 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer and heating up both extruders.'))
1909 self.comm.sendCommand('M105')
1910 self.comm.sendCommand('M104 S220 T0')
1911 self.comm.sendCommand('M104 S220 T1')
1912 self.comm.sendCommand('G28')
1913 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1914 self._wizardState = 1
1915 if not self.comm.isPrinting():
1916 if self._wizardState == 3:
1917 self._wizardState = 4
1918 wx.CallAfter(self.infoBox.SetAttention, _('Please measure the distance between the vertical lines in millimeters.'))
1919 wx.CallAfter(self.textEntry.SetValue, '0.0')
1920 wx.CallAfter(self.textEntry.Enable, True)
1921 wx.CallAfter(self.resumeButton.Enable, True)
1922 wx.CallAfter(self.resumeButton.SetFocus)
1923 elif self._wizardState == 6:
1924 self._wizardState = 7
1925 wx.CallAfter(self.infoBox.SetAttention, _('Which vertical line number lays perfect on top of each other? Leftmost line is zero.'))
1926 wx.CallAfter(self.textEntry.SetValue, '10')
1927 wx.CallAfter(self.textEntry.Enable, True)
1928 wx.CallAfter(self.resumeButton.Enable, True)
1929 wx.CallAfter(self.resumeButton.SetFocus)
1931 elif self.comm.isError():
1932 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1934 def mcMessage(self, message):
1937 def mcProgress(self, lineNr):
1940 def mcZChange(self, newZ):
1943 class bedLevelWizard(wx.wizard.Wizard):
1945 super(bedLevelWizard, self).__init__(None, -1, _("Bed leveling wizard"))
1947 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1948 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1950 self.mainPage = bedLevelWizardMain(self)
1951 self.headOffsetCalibration = None
1953 self.RunWizard(self.mainPage)
1956 def OnPageChanging(self, e):
1957 e.GetPage().StoreData()
1959 def OnPageChanged(self, e):
1960 if e.GetPage().AllowNext():
1961 self.FindWindowById(wx.ID_FORWARD).Enable()
1963 self.FindWindowById(wx.ID_FORWARD).Disable()
1964 if e.GetPage().AllowBack():
1965 self.FindWindowById(wx.ID_BACKWARD).Enable()
1967 self.FindWindowById(wx.ID_BACKWARD).Disable()
1969 class headOffsetWizard(wx.wizard.Wizard):
1971 super(headOffsetWizard, self).__init__(None, -1, _("Head offset wizard"))
1973 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1974 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1976 self.mainPage = headOffsetCalibrationPage(self)
1978 self.RunWizard(self.mainPage)
1981 def OnPageChanging(self, e):
1982 e.GetPage().StoreData()
1984 def OnPageChanged(self, e):
1985 if e.GetPage().AllowNext():
1986 self.FindWindowById(wx.ID_FORWARD).Enable()
1988 self.FindWindowById(wx.ID_FORWARD).Disable()
1989 if e.GetPage().AllowBack():
1990 self.FindWindowById(wx.ID_BACKWARD).Enable()
1992 self.FindWindowById(wx.ID_BACKWARD).Disable()