1 __copyright__ = "Copyright (C) 2013 David Braam - Released under terms of the AGPLv3 License"
12 from Cura.gui import firmwareInstall
13 from Cura.gui import printWindow
14 from Cura.util import machineCom
15 from Cura.util import profile
16 from Cura.util import gcodeGenerator
17 from Cura.util import resources
18 from Cura.util import version
21 class InfoBox(wx.Panel):
22 def __init__(self, parent):
23 super(InfoBox, self).__init__(parent)
24 self.SetBackgroundColour('#FFFF80')
26 self.sizer = wx.GridBagSizer(5, 5)
27 self.SetSizer(self.sizer)
29 self.attentionBitmap = wx.Bitmap(resources.getPathForImage('attention.png'))
30 self.errorBitmap = wx.Bitmap(resources.getPathForImage('error.png'))
31 self.readyBitmap = wx.Bitmap(resources.getPathForImage('ready.png'))
33 wx.Bitmap(resources.getPathForImage('busy-0.png')),
34 wx.Bitmap(resources.getPathForImage('busy-1.png')),
35 wx.Bitmap(resources.getPathForImage('busy-2.png')),
36 wx.Bitmap(resources.getPathForImage('busy-3.png'))
39 self.bitmap = wx.StaticBitmap(self, -1, wx.EmptyBitmapRGBA(24, 24, red=255, green=255, blue=255, alpha=1))
40 self.text = wx.StaticText(self, -1, '')
41 self.extraInfoButton = wx.Button(self, -1, 'i', style=wx.BU_EXACTFIT)
42 self.sizer.Add(self.bitmap, pos=(0, 0), flag=wx.ALL, border=5)
43 self.sizer.Add(self.text, pos=(0, 1), flag=wx.TOP | wx.BOTTOM | wx.ALIGN_CENTER_VERTICAL, border=5)
44 self.sizer.Add(self.extraInfoButton, pos=(0,2), flag=wx.ALL|wx.ALIGN_RIGHT|wx.ALIGN_CENTER_VERTICAL, border=5)
45 self.sizer.AddGrowableCol(1)
47 self.extraInfoButton.Show(False)
49 self.extraInfoUrl = ''
51 self.timer = wx.Timer(self)
52 self.Bind(wx.EVT_TIMER, self.doBusyUpdate, self.timer)
53 self.Bind(wx.EVT_BUTTON, self.doExtraInfo, self.extraInfoButton)
56 def SetInfo(self, info):
57 self.SetBackgroundColour('#FFFF80')
58 self.text.SetLabel(info)
59 self.extraInfoButton.Show(False)
62 def SetError(self, info, extraInfoUrl):
63 self.extraInfoUrl = extraInfoUrl
64 self.SetBackgroundColour('#FF8080')
65 self.text.SetLabel(info)
67 self.extraInfoButton.Show(True)
69 self.SetErrorIndicator()
72 def SetAttention(self, info):
73 self.SetBackgroundColour('#FFFF80')
74 self.text.SetLabel(info)
75 self.extraInfoButton.Show(False)
76 self.SetAttentionIndicator()
80 def SetBusy(self, info):
82 self.SetBusyIndicator()
84 def SetBusyIndicator(self):
86 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
88 def doExtraInfo(self, e):
89 webbrowser.open(self.extraInfoUrl)
91 def doBusyUpdate(self, e):
92 if self.busyState is None:
95 if self.busyState >= len(self.busyBitmap):
97 self.bitmap.SetBitmap(self.busyBitmap[self.busyState])
99 def SetReadyIndicator(self):
100 self.busyState = None
101 self.bitmap.SetBitmap(self.readyBitmap)
103 def SetErrorIndicator(self):
104 self.busyState = None
105 self.bitmap.SetBitmap(self.errorBitmap)
107 def SetAttentionIndicator(self):
108 self.busyState = None
109 self.bitmap.SetBitmap(self.attentionBitmap)
111 class ImageButton(wx.Panel):
112 DefaultOverlay = wx.Bitmap(resources.getPathForImage('ImageButton_Overlay.png'))
115 __last_group__ = None
116 def __init__(self, parent, label, bitmap, extra_label=None, overlay=DefaultOverlay, style=None):
117 super(ImageButton, self).__init__(parent)
119 if style is ImageButton.IB_GROUP:
120 ImageButton.__last_group__ = self
121 ImageButton.__groups__[self] = [self]
124 if ImageButton.__last_group__:
125 ImageButton.__groups__[ImageButton.__last_group__].append(self)
126 self.group = ImageButton.__last_group__
129 self.sizer = wx.StaticBoxSizer(wx.StaticBox(self), wx.VERTICAL)
130 self.SetSizer(self.sizer)
132 self.original_overlay = overlay
133 self.overlay = self.createOverlay(bitmap, overlay)
134 self.text = wx.StaticText(self, -1, label)
135 self.bmp = wx.StaticBitmap(self, -1, self.bitmap)
137 self.extra_text = wx.StaticText(self, -1, extra_label)
139 self.extra_text = None
140 self.selected = False
143 self.sizer.Add(self.text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
144 self.sizer.Add(self.bmp, 1, flag=wx.ALL|wx.ALIGN_CENTER|wx.EXPAND, border=5)
146 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
147 self.bmp.Bind(wx.EVT_LEFT_UP, self.OnLeftClick)
151 ImageButton.__groups__[self.group].remove(self)
152 if self == self.group:
153 for ib in ImageButton.__groups__[self.group]:
155 del ImageButton.__groups__[self.group]
156 if ImageButton.__last_group__ == self:
157 ImageButton.__last_group__ = None
159 def TriggerGroupCallbacks(self):
161 for ib in ImageButton.__groups__[self.group]:
162 if ib.GetValue() and ib.callback:
166 if self.GetValue() and self.callback:
169 def OnLeftClick(self, e):
175 def SetValue(self, value):
176 old_value = self.selected
177 self.selected = bool(value)
178 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
179 if self.selected and self.group:
180 for ib in ImageButton.__groups__[self.group]:
185 if self.callback and not old_value and self.selected:
188 def SetLabel(self, label):
189 self.text.SetLabel(label)
192 def SetExtraLabel(self, label):
194 self.extra_text.SetLabel(label)
196 self.extra_text = wx.StaticText(self, -1, label)
197 self.sizer.Add(self.extra_text, 0, flag=wx.LEFT|wx.RIGHT|wx.ALIGN_CENTER, border=5)
200 def SetBitmap(self, bitmap):
202 self.overlay = self.createOverlay(bitmap, self.original_overlay)
203 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
206 def SetOverlay(self, overlay):
207 self.original_overlay = overlay
208 self.overlay = self.createOverlay(self.bitmap, self.original_overlay)
209 self.bmp.SetBitmap(self.overlay if self.GetValue() else self.bitmap)
212 def OnSelected(self, callback):
213 self.callback = callback
215 def createOverlay(self, bitmap, overlay):
216 result = bitmap.GetSubBitmap(wx.Rect(0, 0, *bitmap.Size))
217 (width, height) = bitmap.GetSize()
218 overlay_image = wx.ImageFromBitmap(overlay)
219 overlay_image = overlay_image.Scale(width, height, wx.IMAGE_QUALITY_HIGH)
220 overlay_scaled = wx.BitmapFromImage(overlay_image)
222 dc.SelectObject(result)
223 dc.DrawBitmap(overlay_scaled, 0, 0)
224 dc.SelectObject(wx.NullBitmap)
228 class InfoPage(wx.wizard.WizardPageSimple):
229 def __init__(self, parent, title):
230 wx.wizard.WizardPageSimple.__init__(self, parent)
232 parent.GetPageAreaSizer().Add(self)
233 sizer = wx.GridBagSizer(5, 5)
237 self.title = wx.StaticText(self, -1, title)
238 font = wx.Font(18, wx.SWISS, wx.NORMAL, wx.BOLD)
239 self.title.SetFont(font)
240 # HACK ALERT: For some reason, the StaticText keeps its same size as if
241 # the font was not modified, this causes the text to wrap and to
242 # get out of bounds of the widgets area and hide other widgets.
243 # The only way I found for the widget to get its right size was to calculate
244 # the new font's extent and set the min size on the widget
245 self.title.SetMinSize(self.GetTextExtent(font, title))
246 sizer.Add(self.title, pos=(0, 0), span=(1, 2), flag=wx.ALIGN_CENTRE | wx.ALL)
247 sizer.Add(wx.StaticLine(self, -1), pos=(1, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
248 sizer.AddGrowableCol(1)
252 def GetTextExtent(self, font, text):
255 w,h = dc.GetTextExtent(text)
258 def AddText(self, info):
259 text = wx.StaticText(self, -1, info)
260 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
264 def AddSeperator(self):
265 self.GetSizer().Add(wx.StaticLine(self, -1), pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
268 def AddHiddenSeperator(self):
271 def AddInfoBox(self):
272 infoBox = InfoBox(self)
273 self.GetSizer().Add(infoBox, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
277 def AddRadioButton(self, label, style=0):
278 radio = wx.RadioButton(self, -1, label, style=style)
279 self.GetSizer().Add(radio, pos=(self.rowNr, 0), span=(1, 2), flag=wx.EXPAND | wx.ALL)
283 def AddCheckbox(self, label, checked=False):
284 check = wx.CheckBox(self, -1)
285 text = wx.StaticText(self, -1, label)
286 check.SetValue(checked)
287 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
288 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 2), flag=wx.ALL)
292 def AddButton(self, label):
293 button = wx.Button(self, -1, label)
294 self.GetSizer().Add(button, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
298 def AddDualButton(self, label1, label2):
299 button1 = wx.Button(self, -1, label1)
300 self.GetSizer().Add(button1, pos=(self.rowNr, 0), flag=wx.RIGHT)
301 button2 = wx.Button(self, -1, label2)
302 self.GetSizer().Add(button2, pos=(self.rowNr, 1))
304 return button1, button2
306 def AddTextCtrl(self, value):
307 ret = wx.TextCtrl(self, -1, value)
308 self.GetSizer().Add(ret, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT)
312 def AddLabelTextCtrl(self, info, value):
313 text = wx.StaticText(self, -1, info)
314 ret = wx.TextCtrl(self, -1, value)
315 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
316 self.GetSizer().Add(ret, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
320 def AddTextCtrlButton(self, value, buttonText):
321 text = wx.TextCtrl(self, -1, value)
322 button = wx.Button(self, -1, buttonText)
323 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT)
324 self.GetSizer().Add(button, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT)
328 def AddBitmap(self, bitmap):
329 bitmap = wx.StaticBitmap(self, -1, bitmap)
330 self.GetSizer().Add(bitmap, pos=(self.rowNr, 0), span=(1, 2), flag=wx.LEFT | wx.RIGHT)
335 panel = wx.Panel(self, -1)
336 sizer = wx.GridBagSizer(2, 2)
337 panel.SetSizer(sizer)
338 self.GetSizer().Add(panel, pos=(self.rowNr, 0), span=(1, 2), flag=wx.ALL | wx.EXPAND)
342 def AddCheckmark(self, label, bitmap):
343 check = wx.StaticBitmap(self, -1, bitmap)
344 text = wx.StaticText(self, -1, label)
345 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT)
346 self.GetSizer().Add(check, pos=(self.rowNr, 1), span=(1, 1), flag=wx.ALL)
350 def AddCombo(self, label, options):
351 combo = wx.ComboBox(self, -1, options[0], choices=options, style=wx.CB_DROPDOWN|wx.CB_READONLY)
352 text = wx.StaticText(self, -1, label)
353 self.GetSizer().Add(text, pos=(self.rowNr, 0), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.ALIGN_CENTER)
354 self.GetSizer().Add(combo, pos=(self.rowNr, 1), span=(1, 1), flag=wx.LEFT | wx.RIGHT | wx.EXPAND)
358 def AddImageButton(self, panel, x, y, label, filename, image_size=None,
359 extra_label=None, overlay=ImageButton.DefaultOverlay, style=None):
360 ib = ImageButton(panel, label, self.GetBitmap(filename, image_size), extra_label, overlay, style)
361 panel.GetSizer().Add(ib, pos=(x, y), flag=wx.LEFT | wx.RIGHT | wx.BOTTOM, border=10)
364 def GetBitmap(self, filename, image_size):
365 if image_size == None:
366 return wx.Bitmap(resources.getPathForImage(filename))
368 image = wx.Image(resources.getPathForImage(filename))
369 image_scaled = image.Scale(image_size[0], image_size[1], wx.IMAGE_QUALITY_HIGH)
370 return wx.BitmapFromImage(image_scaled)
381 class PrintrbotPage(InfoPage):
382 def __init__(self, parent):
383 self._printer_info = [
384 # X, Y, Z, Nozzle Size, Filament Diameter, PrintTemperature, Print Speed, Travel Speed, Retract speed, Retract amount, use bed level sensor
385 ("Simple Metal", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, True),
386 ("Metal Plus", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
387 ("Simple Makers Kit", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, True),
388 (":" + _("Older models"),),
389 ("Original", 130, 130, 130, 0.5, 2.95, 208, 40, 70, 30, 1, False),
390 ("Simple Maker's Edition v1", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
391 ("Simple Maker's Edition v2 (2013 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
392 ("Simple Maker's Edition v3 (2014 Printrbot Simple)", 100, 100, 100, 0.4, 1.75, 208, 40, 70, 30, 1, False),
393 ("Jr v1", 115, 120, 80, 0.4, 1.75, 208, 40, 70, 30, 1, False),
394 ("Jr v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
395 ("LC v1", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
396 ("LC v2", 150, 150, 150, 0.4, 1.75, 208, 40, 70, 30, 1, False),
397 ("Plus v1", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
398 ("Plus v2", 200, 200, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
399 ("Plus v2.1", 185, 220, 200, 0.4, 1.75, 208, 40, 70, 30, 1, False),
400 ("Plus v2.2 (Model 1404/140422/140501/140507)", 250, 250, 250, 0.4, 1.75, 208, 40, 70, 30, 1, True),
401 ("Go v2 Large", 505, 306, 310, 0.4, 1.75, 208, 35, 70, 30, 1, True),
404 super(PrintrbotPage, self).__init__(parent, _("Printrbot Selection"))
405 self.AddBitmap(wx.Bitmap(resources.getPathForImage('Printrbot_logo.png')))
406 self.AddText(_("Select which Printrbot machine you have:"))
408 for printer in self._printer_info:
409 if printer[0].startswith(":"):
411 self.AddText(printer[0][1:])
413 item = self.AddRadioButton(printer[0])
414 item.data = printer[1:]
415 self._items.append(item)
418 profile.putMachineSetting('machine_name', 'Printrbot ???')
419 for item in self._items:
422 profile.putMachineSetting('machine_name', 'Printrbot ' + item.GetLabel())
423 profile.putMachineSetting('machine_width', data[0])
424 profile.putMachineSetting('machine_depth', data[1])
425 profile.putMachineSetting('machine_height', data[2])
426 profile.putProfileSetting('nozzle_size', data[3])
427 profile.putProfileSetting('filament_diameter', data[4])
428 profile.putProfileSetting('print_temperature', data[5])
429 profile.putProfileSetting('print_speed', data[6])
430 profile.putProfileSetting('travel_speed', data[7])
431 profile.putProfileSetting('retraction_speed', data[8])
432 profile.putProfileSetting('retraction_amount', data[9])
433 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
434 profile.putMachineSetting('has_heated_bed', 'False')
435 profile.putMachineSetting('machine_center_is_zero', 'False')
436 profile.putMachineSetting('extruder_head_size_min_x', '0')
437 profile.putMachineSetting('extruder_head_size_min_y', '0')
438 profile.putMachineSetting('extruder_head_size_max_x', '0')
439 profile.putMachineSetting('extruder_head_size_max_y', '0')
440 profile.putMachineSetting('extruder_head_size_height', '0')
442 profile.setAlterationFile('start.gcode', """;Sliced at: {day} {date} {time}
443 ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
444 ;Print time: {print_time}
445 ;Filament used: {filament_amount}m {filament_weight}g
446 ;Filament cost: {filament_cost}
447 ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
448 ;M109 S{print_temperature} ;Uncomment to add your own temperature line
450 G90 ;absolute positioning
451 M82 ;set extruder to absolute mode
452 M107 ;start with the fan off
453 G28 X0 Y0 ;move X/Y to min endstops
454 G28 Z0 ;move Z to min endstops
455 G29 ;Run the auto bed leveling
456 G1 Z15.0 F{travel_speed} ;move the platform down 15mm
457 G92 E0 ;zero the extruded length
458 G1 F200 E3 ;extrude 3mm of feed stock
459 G92 E0 ;zero the extruded length again
461 ;Put printing message on LCD screen
465 class OtherMachineSelectPage(InfoPage):
466 def __init__(self, parent):
467 super(OtherMachineSelectPage, self).__init__(parent, _("Other machine information"))
468 self.AddText(_("The following pre-defined machine profiles are available"))
469 self.AddText(_("Note that these profiles are not guaranteed to give good results,\nor work at all. Extra tweaks might be required.\nIf you find issues with the predefined profiles,\nor want an extra profile.\nPlease report it at the github issue tracker."))
471 machines = resources.getDefaultMachineProfiles()
473 for filename in machines:
474 name = os.path.splitext(os.path.basename(filename))[0]
475 item = self.AddRadioButton(name)
476 item.filename = filename
477 item.Bind(wx.EVT_RADIOBUTTON, self.OnProfileSelect)
478 self.options.append(item)
480 item = self.AddRadioButton(_('Custom...'))
482 item.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
484 def OnProfileSelect(self, e):
485 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineInfoPage)
487 def OnOtherSelect(self, e):
488 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().customRepRapInfoPage)
491 for option in self.options:
492 if option.GetValue():
493 profile.loadProfile(option.filename)
494 profile.loadMachineSettings(option.filename)
496 class OtherMachineInfoPage(InfoPage):
497 def __init__(self, parent):
498 super(OtherMachineInfoPage, self).__init__(parent, _("Cura Ready!"))
499 self.AddText(_("Cura is now ready to be used!"))
501 class CustomRepRapInfoPage(InfoPage):
502 def __init__(self, parent):
503 super(CustomRepRapInfoPage, self).__init__(parent, _("Custom RepRap information"))
504 self.AddText(_("RepRap machines can be vastly different, so here you can set your own settings."))
505 self.AddText(_("Be sure to review the default profile before running it on your machine."))
506 self.AddText(_("If you like a default profile for your machine added,\nthen make an issue on github."))
508 self.AddText(_("You will have to manually install Marlin or Sprinter firmware."))
510 self.machineName = self.AddLabelTextCtrl(_("Machine name"), "RepRap")
511 self.machineWidth = self.AddLabelTextCtrl(_("Machine width X (mm)"), "80")
512 self.machineDepth = self.AddLabelTextCtrl(_("Machine depth Y (mm)"), "80")
513 self.machineHeight = self.AddLabelTextCtrl(_("Machine height Z (mm)"), "55")
514 self.nozzleSize = self.AddLabelTextCtrl(_("Nozzle size (mm)"), "0.5")
515 self.heatedBed = self.AddCheckbox(_("Heated bed"))
516 self.HomeAtCenter = self.AddCheckbox(_("Bed center is 0,0,0 (RoStock)"))
519 profile.putMachineSetting('machine_name', self.machineName.GetValue())
520 profile.putMachineSetting('machine_width', self.machineWidth.GetValue())
521 profile.putMachineSetting('machine_depth', self.machineDepth.GetValue())
522 profile.putMachineSetting('machine_height', self.machineHeight.GetValue())
523 profile.putProfileSetting('nozzle_size', self.nozzleSize.GetValue())
524 profile.putProfileSetting('wall_thickness', float(profile.getProfileSettingFloat('nozzle_size')) * 2)
525 profile.putMachineSetting('has_heated_bed', str(self.heatedBed.GetValue()))
526 profile.putMachineSetting('machine_center_is_zero', str(self.HomeAtCenter.GetValue()))
527 profile.putMachineSetting('extruder_head_size_min_x', '0')
528 profile.putMachineSetting('extruder_head_size_min_y', '0')
529 profile.putMachineSetting('extruder_head_size_max_x', '0')
530 profile.putMachineSetting('extruder_head_size_max_y', '0')
531 profile.putMachineSetting('extruder_head_size_height', '0')
532 profile.checkAndUpdateMachineName()
534 class MachineSelectPage(InfoPage):
535 def __init__(self, parent):
536 super(MachineSelectPage, self).__init__(parent, _("Select your machine"))
537 self.AddText(_("What kind of machine do you have:"))
539 self.Ultimaker2Radio = self.AddRadioButton("Ultimaker2")
540 self.Ultimaker2Radio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
541 self.Ultimaker2ExtRadio = self.AddRadioButton("Ultimaker2extended")
542 self.Ultimaker2ExtRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
543 self.Ultimaker2GoRadio = self.AddRadioButton("Ultimaker2go")
544 self.Ultimaker2GoRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimaker2Select)
545 self.UltimakerRadio = self.AddRadioButton("Ultimaker Original")
546 self.UltimakerRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerSelect)
547 self.UltimakerOPRadio = self.AddRadioButton("Ultimaker Original+")
548 self.UltimakerOPRadio.Bind(wx.EVT_RADIOBUTTON, self.OnUltimakerOPSelect)
549 self.PrintrbotRadio = self.AddRadioButton("Printrbot")
550 self.PrintrbotRadio.Bind(wx.EVT_RADIOBUTTON, self.OnPrintrbotSelect)
551 self.OtherRadio = self.AddRadioButton(_("Other (Ex: RepRap, MakerBot, Witbox)"))
552 self.OtherRadio.Bind(wx.EVT_RADIOBUTTON, self.OnOtherSelect)
554 def OnUltimaker2Select(self, e):
555 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimaker2ReadyPage)
557 def OnUltimakerSelect(self, e):
558 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerSelectParts)
560 def OnUltimakerOPSelect(self, e):
561 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().ultimakerFirmwareUpgradePage)
563 def OnPrintrbotSelect(self, e):
564 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().printrbotSelectType)
566 def OnOtherSelect(self, e):
567 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().otherMachineSelectPage)
570 profile.putProfileSetting('retraction_enable', 'True')
571 if self.Ultimaker2Radio.GetValue() or self.Ultimaker2GoRadio.GetValue() or self.Ultimaker2ExtRadio.GetValue():
572 if self.Ultimaker2Radio.GetValue():
573 profile.putMachineSetting('machine_width', '230')
574 profile.putMachineSetting('machine_depth', '225')
575 profile.putMachineSetting('machine_height', '205')
576 profile.putMachineSetting('machine_name', 'ultimaker2')
577 profile.putMachineSetting('machine_type', 'ultimaker2')
578 profile.putMachineSetting('has_heated_bed', 'True')
579 if self.Ultimaker2GoRadio.GetValue():
580 profile.putMachineSetting('machine_width', '120')
581 profile.putMachineSetting('machine_depth', '120')
582 profile.putMachineSetting('machine_height', '115')
583 profile.putMachineSetting('machine_name', 'ultimaker2go')
584 profile.putMachineSetting('machine_type', 'ultimaker2go')
585 profile.putMachineSetting('has_heated_bed', 'False')
586 if self.Ultimaker2ExtRadio.GetValue():
587 profile.putMachineSetting('machine_width', '230')
588 profile.putMachineSetting('machine_depth', '225')
589 profile.putMachineSetting('machine_height', '315')
590 profile.putMachineSetting('machine_name', 'ultimaker2extended')
591 profile.putMachineSetting('machine_type', 'ultimaker2extended')
592 profile.putMachineSetting('has_heated_bed', 'False')
593 profile.putMachineSetting('machine_center_is_zero', 'False')
594 profile.putMachineSetting('gcode_flavor', 'UltiGCode')
595 profile.putMachineSetting('extruder_head_size_min_x', '40.0')
596 profile.putMachineSetting('extruder_head_size_min_y', '10.0')
597 profile.putMachineSetting('extruder_head_size_max_x', '60.0')
598 profile.putMachineSetting('extruder_head_size_max_y', '30.0')
599 profile.putMachineSetting('extruder_head_size_height', '48.0')
600 profile.putProfileSetting('nozzle_size', '0.4')
601 profile.putProfileSetting('fan_full_height', '5.0')
602 profile.putMachineSetting('extruder_offset_x1', '18.0')
603 profile.putMachineSetting('extruder_offset_y1', '0.0')
604 elif self.UltimakerRadio.GetValue():
605 profile.putMachineSetting('machine_width', '205')
606 profile.putMachineSetting('machine_depth', '205')
607 profile.putMachineSetting('machine_height', '200')
608 profile.putMachineSetting('machine_name', 'ultimaker original')
609 profile.putMachineSetting('machine_type', 'ultimaker')
610 profile.putMachineSetting('machine_center_is_zero', 'False')
611 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
612 profile.putProfileSetting('nozzle_size', '0.4')
613 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
614 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
615 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
616 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
617 profile.putMachineSetting('extruder_head_size_height', '55.0')
618 elif self.UltimakerOPRadio.GetValue():
619 profile.putMachineSetting('machine_width', '205')
620 profile.putMachineSetting('machine_depth', '205')
621 profile.putMachineSetting('machine_height', '200')
622 profile.putMachineSetting('machine_name', 'ultimaker original+')
623 profile.putMachineSetting('machine_type', 'ultimaker_plus')
624 profile.putMachineSetting('machine_center_is_zero', 'False')
625 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
626 profile.putProfileSetting('nozzle_size', '0.4')
627 profile.putMachineSetting('extruder_head_size_min_x', '75.0')
628 profile.putMachineSetting('extruder_head_size_min_y', '18.0')
629 profile.putMachineSetting('extruder_head_size_max_x', '18.0')
630 profile.putMachineSetting('extruder_head_size_max_y', '35.0')
631 profile.putMachineSetting('extruder_head_size_height', '55.0')
632 profile.putMachineSetting('has_heated_bed', 'True')
633 profile.putMachineSetting('extruder_amount', '1')
634 profile.putProfileSetting('retraction_enable', 'True')
636 profile.putMachineSetting('machine_width', '80')
637 profile.putMachineSetting('machine_depth', '80')
638 profile.putMachineSetting('machine_height', '60')
639 profile.putMachineSetting('machine_name', 'reprap')
640 profile.putMachineSetting('machine_type', 'reprap')
641 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
642 profile.putPreference('startMode', 'Normal')
643 profile.putProfileSetting('nozzle_size', '0.5')
644 profile.checkAndUpdateMachineName()
645 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
647 class SelectParts(InfoPage):
648 def __init__(self, parent):
649 super(SelectParts, self).__init__(parent, _("Select upgraded parts you have"))
650 self.AddText(_("To assist you in having better default settings for your Ultimaker\nCura would like to know which upgrades you have in your machine."))
652 self.springExtruder = self.AddCheckbox(_("Extruder drive upgrade"))
653 self.heatedBedKit = self.AddCheckbox(_("Heated printer bed (kit)"))
654 self.heatedBed = self.AddCheckbox(_("Heated printer bed (self built)"))
655 self.dualExtrusion = self.AddCheckbox(_("Dual extrusion (experimental)"))
657 self.AddText(_("If you have an Ultimaker bought after october 2012 you will have the\nExtruder drive upgrade. If you do not have this upgrade,\nit is highly recommended to improve reliability."))
658 self.AddText(_("This upgrade can be bought from the Ultimaker webshop\nor found on thingiverse as thing:26094"))
659 self.springExtruder.SetValue(True)
662 profile.putMachineSetting('ultimaker_extruder_upgrade', str(self.springExtruder.GetValue()))
663 if self.heatedBed.GetValue() or self.heatedBedKit.GetValue():
664 profile.putMachineSetting('has_heated_bed', 'True')
666 profile.putMachineSetting('has_heated_bed', 'False')
667 if self.dualExtrusion.GetValue():
668 profile.putMachineSetting('extruder_amount', '2')
669 profile.putMachineSetting('machine_depth', '195')
671 profile.putMachineSetting('extruder_amount', '1')
672 if profile.getMachineSetting('ultimaker_extruder_upgrade') == 'True':
673 profile.putProfileSetting('retraction_enable', 'True')
675 profile.putProfileSetting('retraction_enable', 'False')
678 class UltimakerFirmwareUpgradePage(InfoPage):
679 def __init__(self, parent):
680 super(UltimakerFirmwareUpgradePage, self).__init__(parent, _("Upgrade Ultimaker Firmware"))
681 self.AddText(_("Firmware is the piece of software running directly on your 3D printer.\nThis firmware controls the stepper motors, regulates the temperature\nand ultimately makes your printer work."))
682 self.AddHiddenSeperator()
683 self.AddText(_("The firmware shipping with new Ultimakers works, but upgrades\nhave been made to make better prints, and make calibration easier."))
684 self.AddHiddenSeperator()
685 self.AddText(_("Cura requires these new features and thus\nyour firmware will most likely need to be upgraded.\nYou will get the chance to do so now."))
686 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Upgrade to Marlin firmware'), _('Skip upgrade'))
687 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
688 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
689 self.AddHiddenSeperator()
690 if profile.getMachineSetting('machine_type') == 'ultimaker':
691 self.AddText(_("Do not upgrade to this firmware if:"))
692 self.AddText(_("* You have an older machine based on ATMega1280 (Rev 1 machine)"))
693 self.AddText(_("* Build your own heated bed"))
694 self.AddText(_("* Have other changes in the firmware"))
695 # button = self.AddButton('Goto this page for a custom firmware')
696 # button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
701 def OnUpgradeClick(self, e):
702 if firmwareInstall.InstallFirmware():
703 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
705 def OnSkipClick(self, e):
706 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
707 self.GetParent().ShowPage(self.GetNext())
709 def OnUrlClick(self, e):
710 webbrowser.open('http://marlinbuilder.robotfuzz.com/')
712 class UltimakerCheckupPage(InfoPage):
713 def __init__(self, parent):
714 super(UltimakerCheckupPage, self).__init__(parent, _("Ultimaker Checkup"))
716 self.checkBitmap = wx.Bitmap(resources.getPathForImage('checkmark.png'))
717 self.crossBitmap = wx.Bitmap(resources.getPathForImage('cross.png'))
718 self.unknownBitmap = wx.Bitmap(resources.getPathForImage('question.png'))
719 self.endStopNoneBitmap = wx.Bitmap(resources.getPathForImage('endstop_none.png'))
720 self.endStopXMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmin.png'))
721 self.endStopXMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_xmax.png'))
722 self.endStopYMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymin.png'))
723 self.endStopYMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_ymax.png'))
724 self.endStopZMinBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmin.png'))
725 self.endStopZMaxBitmap = wx.Bitmap(resources.getPathForImage('endstop_zmax.png'))
728 _("It is a good idea to do a few sanity checks now on your Ultimaker.\nYou can skip these if you know your machine is functional."))
729 b1, b2 = self.AddDualButton(_("Run checks"), _("Skip checks"))
730 b1.Bind(wx.EVT_BUTTON, self.OnCheckClick)
731 b2.Bind(wx.EVT_BUTTON, self.OnSkipClick)
733 self.commState = self.AddCheckmark(_("Communication:"), self.unknownBitmap)
734 self.tempState = self.AddCheckmark(_("Temperature:"), self.unknownBitmap)
735 self.stopState = self.AddCheckmark(_("Endstops:"), self.unknownBitmap)
737 self.infoBox = self.AddInfoBox()
738 self.machineState = self.AddText("")
739 self.temperatureLabel = self.AddText("")
740 self.errorLogButton = self.AddButton(_("Show error log"))
741 self.errorLogButton.Show(False)
743 self.endstopBitmap = self.AddBitmap(self.endStopNoneBitmap)
745 self.xMinStop = False
746 self.xMaxStop = False
747 self.yMinStop = False
748 self.yMaxStop = False
749 self.zMinStop = False
750 self.zMaxStop = False
752 self.Bind(wx.EVT_BUTTON, self.OnErrorLog, self.errorLogButton)
755 if self.comm is not None:
759 self.endstopBitmap.Show(False)
762 def OnSkipClick(self, e):
763 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
764 self.GetParent().ShowPage(self.GetNext())
766 def OnCheckClick(self, e=None):
767 self.errorLogButton.Show(False)
768 if self.comm is not None:
772 wx.CallAfter(self.OnCheckClick)
774 self.infoBox.SetBusy(_("Connecting to machine."))
775 self.commState.SetBitmap(self.unknownBitmap)
776 self.tempState.SetBitmap(self.unknownBitmap)
777 self.stopState.SetBitmap(self.unknownBitmap)
778 self.checkupState = 0
779 self.checkExtruderNr = 0
780 self.comm = machineCom.MachineCom(callbackObject=self)
782 def OnErrorLog(self, e):
783 printWindow.LogWindow('\n'.join(self.comm.getLog()))
785 def mcLog(self, message):
788 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
789 if not self.comm.isOperational():
791 if self.checkupState == 0:
792 self.tempCheckTimeout = 20
793 if temp[self.checkExtruderNr] > 70:
794 self.checkupState = 1
795 wx.CallAfter(self.infoBox.SetInfo, _("Cooldown before temperature check."))
796 self.comm.sendCommand("M104 S0 T%d" % (self.checkExtruderNr))
797 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
799 self.startTemp = temp[self.checkExtruderNr]
800 self.checkupState = 2
801 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
802 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
803 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
804 elif self.checkupState == 1:
805 if temp[self.checkExtruderNr] < 60:
806 self.startTemp = temp[self.checkExtruderNr]
807 self.checkupState = 2
808 wx.CallAfter(self.infoBox.SetInfo, _("Checking the heater and temperature sensor."))
809 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
810 self.comm.sendCommand('M104 S200 T%d' % (self.checkExtruderNr))
811 elif self.checkupState == 2:
812 #print "WARNING, TEMPERATURE TEST DISABLED FOR TESTING!"
813 if temp[self.checkExtruderNr] > self.startTemp + 40:
814 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
815 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
816 if self.checkExtruderNr < int(profile.getMachineSetting('extruder_amount')):
817 self.checkExtruderNr = 0
818 self.checkupState = 3
819 wx.CallAfter(self.infoBox.SetAttention, _("Please make sure none of the endstops are pressed."))
820 wx.CallAfter(self.endstopBitmap.Show, True)
821 wx.CallAfter(self.Layout)
822 self.comm.sendCommand('M119')
823 wx.CallAfter(self.tempState.SetBitmap, self.checkBitmap)
825 self.checkupState = 0
826 self.checkExtruderNr += 1
828 self.tempCheckTimeout -= 1
829 if self.tempCheckTimeout < 1:
830 self.checkupState = -1
831 wx.CallAfter(self.tempState.SetBitmap, self.crossBitmap)
832 wx.CallAfter(self.infoBox.SetError, _("Temperature measurement FAILED!"), 'http://wiki.ultimaker.com/Cura:_Temperature_measurement_problems')
833 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
834 self.comm.sendCommand('M104 S0 T%d' % (self.checkExtruderNr))
835 elif self.checkupState >= 3 and self.checkupState < 10:
836 self.comm.sendCommand('M119')
837 wx.CallAfter(self.temperatureLabel.SetLabel, _("Head temperature: %d") % (temp[self.checkExtruderNr]))
839 def mcStateChange(self, state):
840 if self.comm is None:
842 if self.comm.isOperational():
843 wx.CallAfter(self.commState.SetBitmap, self.checkBitmap)
844 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
845 elif self.comm.isError():
846 wx.CallAfter(self.commState.SetBitmap, self.crossBitmap)
847 wx.CallAfter(self.infoBox.SetError, _("Failed to establish connection with the printer."), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
848 wx.CallAfter(self.endstopBitmap.Show, False)
849 wx.CallAfter(self.machineState.SetLabel, '%s' % (self.comm.getErrorString()))
850 wx.CallAfter(self.errorLogButton.Show, True)
851 wx.CallAfter(self.Layout)
853 wx.CallAfter(self.machineState.SetLabel, _("Communication State: %s") % (self.comm.getStateString()))
855 def mcMessage(self, message):
856 if self.checkupState >= 3 and self.checkupState < 10 and ('_min' in message or '_max' in message):
857 for data in message.split(' '):
859 tag, value = data.split(':', 1)
861 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
863 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
865 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
867 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
869 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
871 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
873 tag, value = map(str.strip, message.split(':', 1))
875 self.xMinStop = (value == 'H' or value == 'TRIGGERED')
877 self.xMaxStop = (value == 'H' or value == 'TRIGGERED')
879 self.yMinStop = (value == 'H' or value == 'TRIGGERED')
881 self.yMaxStop = (value == 'H' or value == 'TRIGGERED')
883 self.zMinStop = (value == 'H' or value == 'TRIGGERED')
885 self.zMaxStop = (value == 'H' or value == 'TRIGGERED')
886 if 'z_max' in message:
887 self.comm.sendCommand('M119')
889 if self.checkupState == 3:
890 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
891 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
892 self.checkupState = 5
893 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
894 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
896 self.checkupState = 4
897 wx.CallAfter(self.infoBox.SetAttention, _("Please press the right X endstop."))
898 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMaxBitmap)
899 elif self.checkupState == 4:
900 if not self.xMinStop and self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
901 self.checkupState = 5
902 wx.CallAfter(self.infoBox.SetAttention, _("Please press the left X endstop."))
903 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopXMinBitmap)
904 elif self.checkupState == 5:
905 if self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
906 self.checkupState = 6
907 wx.CallAfter(self.infoBox.SetAttention, _("Please press the front Y endstop."))
908 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMinBitmap)
909 elif self.checkupState == 6:
910 if not self.xMinStop and not self.xMaxStop and self.yMinStop and not self.yMaxStop and not self.zMinStop and not self.zMaxStop:
911 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
912 self.checkupState = 8
913 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
914 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
916 self.checkupState = 7
917 wx.CallAfter(self.infoBox.SetAttention, _("Please press the back Y endstop."))
918 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopYMaxBitmap)
919 elif self.checkupState == 7:
920 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and self.yMaxStop and not self.zMinStop and not self.zMaxStop:
921 self.checkupState = 8
922 wx.CallAfter(self.infoBox.SetAttention, _("Please press the top Z endstop."))
923 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMinBitmap)
924 elif self.checkupState == 8:
925 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and self.zMinStop and not self.zMaxStop:
926 if profile.getMachineSetting('machine_type') == 'ultimaker_plus':
927 self.checkupState = 10
929 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
930 wx.CallAfter(self.infoBox.SetReadyIndicator)
931 wx.CallAfter(self.endstopBitmap.Show, False)
932 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
933 wx.CallAfter(self.OnSkipClick, None)
935 self.checkupState = 9
936 wx.CallAfter(self.infoBox.SetAttention, _("Please press the bottom Z endstop."))
937 wx.CallAfter(self.endstopBitmap.SetBitmap, self.endStopZMaxBitmap)
938 elif self.checkupState == 9:
939 if not self.xMinStop and not self.xMaxStop and not self.yMinStop and not self.yMaxStop and not self.zMinStop and self.zMaxStop:
940 self.checkupState = 10
942 wx.CallAfter(self.infoBox.SetInfo, _("Checkup finished"))
943 wx.CallAfter(self.infoBox.SetReadyIndicator)
944 wx.CallAfter(self.endstopBitmap.Show, False)
945 wx.CallAfter(self.stopState.SetBitmap, self.checkBitmap)
946 wx.CallAfter(self.OnSkipClick, None)
948 def mcProgress(self, lineNr):
951 def mcZChange(self, newZ):
955 class UltimakerCalibrationPage(InfoPage):
956 def __init__(self, parent):
957 super(UltimakerCalibrationPage, self).__init__(parent, _("Ultimaker Calibration"))
959 self.AddText("Your Ultimaker requires some calibration.")
960 self.AddText("This calibration is needed for a proper extrusion amount.")
962 self.AddText("The following values are needed:")
963 self.AddText("* Diameter of filament")
964 self.AddText("* Number of steps per mm of filament extrusion")
966 self.AddText("The better you have calibrated these values, the better your prints\nwill become.")
968 self.AddText("First we need the diameter of your filament:")
969 self.filamentDiameter = self.AddTextCtrl(profile.getProfileSetting('filament_diameter'))
971 "If you do not own digital Calipers that can measure\nat least 2 digits then use 2.89mm.\nWhich is the average diameter of most filament.")
972 self.AddText("Note: This value can be changed later at any time.")
975 profile.putProfileSetting('filament_diameter', self.filamentDiameter.GetValue())
978 class UltimakerCalibrateStepsPerEPage(InfoPage):
979 def __init__(self, parent):
980 super(UltimakerCalibrateStepsPerEPage, self).__init__(parent, _("Ultimaker Calibration"))
982 #if profile.getMachineSetting('steps_per_e') == '0':
983 # profile.putMachineSetting('steps_per_e', '865.888')
985 self.AddText(_("Calibrating the Steps Per E requires some manual actions."))
986 self.AddText(_("First remove any filament from your machine."))
987 self.AddText(_("Next put in your filament so the tip is aligned with the\ntop of the extruder drive."))
988 self.AddText(_("We'll push the filament 100mm"))
989 self.extrudeButton = self.AddButton(_("Extrude 100mm filament"))
990 self.AddText(_("Now measure the amount of extruded filament:\n(this can be more or less then 100mm)"))
991 self.lengthInput, self.saveLengthButton = self.AddTextCtrlButton("100", _("Save"))
992 self.AddText(_("This results in the following steps per E:"))
993 self.stepsPerEInput = self.AddTextCtrl(profile.getMachineSetting('steps_per_e'))
994 self.AddText(_("You can repeat these steps to get better calibration."))
997 _("If you still have filament in your printer which needs\nheat to remove, press the heat up button below:"))
998 self.heatButton = self.AddButton(_("Heatup for filament removal"))
1000 self.saveLengthButton.Bind(wx.EVT_BUTTON, self.OnSaveLengthClick)
1001 self.extrudeButton.Bind(wx.EVT_BUTTON, self.OnExtrudeClick)
1002 self.heatButton.Bind(wx.EVT_BUTTON, self.OnHeatClick)
1004 def OnSaveLengthClick(self, e):
1005 currentEValue = float(self.stepsPerEInput.GetValue())
1006 realExtrudeLength = float(self.lengthInput.GetValue())
1007 newEValue = currentEValue * 100 / realExtrudeLength
1008 self.stepsPerEInput.SetValue(str(newEValue))
1009 self.lengthInput.SetValue("100")
1011 def OnExtrudeClick(self, e):
1012 t = threading.Thread(target=self.OnExtrudeRun)
1016 def OnExtrudeRun(self):
1017 self.heatButton.Enable(False)
1018 self.extrudeButton.Enable(False)
1019 currentEValue = float(self.stepsPerEInput.GetValue())
1020 self.comm = machineCom.MachineCom()
1021 if not self.comm.isOpen():
1023 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1024 'Printer error', wx.OK | wx.ICON_INFORMATION)
1025 self.heatButton.Enable(True)
1026 self.extrudeButton.Enable(True)
1029 line = self.comm.readline()
1034 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1037 self.sendGCommand('M302') #Disable cold extrusion protection
1038 self.sendGCommand("M92 E%f" % (currentEValue))
1039 self.sendGCommand("G92 E0")
1040 self.sendGCommand("G1 E100 F600")
1043 self.extrudeButton.Enable()
1044 self.heatButton.Enable()
1046 def OnHeatClick(self, e):
1047 t = threading.Thread(target=self.OnHeatRun)
1051 def OnHeatRun(self):
1052 self.heatButton.Enable(False)
1053 self.extrudeButton.Enable(False)
1054 self.comm = machineCom.MachineCom()
1055 if not self.comm.isOpen():
1057 _("Error: Failed to open serial port to machine\nIf this keeps happening, try disconnecting and reconnecting the USB cable"),
1058 'Printer error', wx.OK | wx.ICON_INFORMATION)
1059 self.heatButton.Enable(True)
1060 self.extrudeButton.Enable(True)
1063 line = self.comm.readline()
1065 self.heatButton.Enable(True)
1066 self.extrudeButton.Enable(True)
1070 #Wait 3 seconds for the SD card init to timeout if we have SD in our firmware but there is no SD card found.
1073 self.sendGCommand('M104 S200') #Set the temperature to 200C, should be enough to get PLA and ABS out.
1075 'Wait till you can remove the filament from the machine, and press OK.\n(Temperature is set to 200C)',
1076 'Machine heatup', wx.OK | wx.ICON_INFORMATION)
1077 self.sendGCommand('M104 S0')
1080 self.heatButton.Enable(True)
1081 self.extrudeButton.Enable(True)
1083 def sendGCommand(self, cmd):
1084 self.comm.sendCommand(cmd) #Disable cold extrusion protection
1086 line = self.comm.readline()
1089 if line.startswith('ok'):
1092 def StoreData(self):
1093 profile.putPreference('steps_per_e', self.stepsPerEInput.GetValue())
1095 class Ultimaker2ReadyPage(InfoPage):
1096 def __init__(self, parent):
1097 super(Ultimaker2ReadyPage, self).__init__(parent, _("Ultimaker2"))
1098 self.AddText(_('Congratulations on your the purchase of your brand new Ultimaker2.'))
1099 self.AddText(_('Cura is now ready to be used with your Ultimaker2.'))
1102 class LulzbotMachineSelectPage(InfoPage):
1106 def __init__(self, parent):
1107 super(LulzbotMachineSelectPage, self).__init__(parent, _("Select your machine"))
1109 self.panel = self.AddPanel()
1111 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1112 self.LulzbotMini = self.AddImageButton(self.panel, 0, 0, _("LulzBot Mini"),
1113 'Lulzbot_mini.jpg', image_size, style=ImageButton.IB_GROUP)
1114 self.LulzbotMini.OnSelected(self.OnLulzbotMiniSelected)
1115 self.LulzbotTaz = self.AddImageButton(self.panel, 0, 1, _("LulzBot TAZ 4 or 5"),
1116 'Lulzbot_TAZ5.jpg', image_size)
1117 self.LulzbotTaz.OnSelected(self.OnLulzbotTazSelected)
1118 self.OtherPrinters = self.AddImageButton(self.panel, 1, 0, _("Other Printers"),
1119 'Generic-3D-Printer.png', image_size)
1120 self.OtherPrinters.OnSelected(self.OnOthersSelected)
1121 self.LulzbotMini.SetValue(True)
1123 def OnPageShown(self):
1124 self.LulzbotMini.TriggerGroupCallbacks()
1126 def OnOthersSelected(self):
1127 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().machineSelectPage)
1129 def OnLulzbotMiniSelected(self):
1130 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotMiniToolheadPage)
1131 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotMiniToolheadPage,
1132 self.GetParent().lulzbotReadyPage)
1134 def OnLulzbotTazSelected(self):
1135 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazSelectPage)
1137 def AllowNext(self):
1140 def AllowBack(self):
1143 def StoreData(self):
1144 if self.LulzbotTaz.GetValue() or self.LulzbotMini.GetValue():
1145 if self.LulzbotTaz.GetValue():
1146 profile.putMachineSetting('machine_width', '290')
1147 profile.putMachineSetting('machine_depth', '275')
1148 profile.putMachineSetting('machine_height', '250')
1149 profile.putMachineSetting('serial_baud', '115200')
1150 profile.putMachineSetting('extruder_head_size_min_x', '0.0')
1151 profile.putMachineSetting('extruder_head_size_max_x', '0.0')
1152 profile.putMachineSetting('extruder_head_size_min_y', '0.0')
1153 profile.putMachineSetting('extruder_head_size_max_y', '0.0')
1154 profile.putMachineSetting('extruder_head_size_height', '0.0')
1156 # Nozzle diameter and machine type will be set in the toolhead selection page
1157 profile.putMachineSetting('machine_name', 'LulzBot Mini')
1158 profile.putMachineSetting('machine_width', '155')
1159 profile.putMachineSetting('machine_depth', '155')
1160 profile.putMachineSetting('machine_height', '163')
1161 profile.putMachineSetting('serial_baud', '115200')
1162 profile.putMachineSetting('extruder_head_size_min_x', '40')
1163 profile.putMachineSetting('extruder_head_size_max_x', '75')
1164 profile.putMachineSetting('extruder_head_size_min_y', '25')
1165 profile.putMachineSetting('extruder_head_size_max_y', '55')
1166 profile.putMachineSetting('extruder_head_size_height', '17')
1168 profile.putMachineSetting('machine_center_is_zero', 'False')
1169 profile.putMachineSetting('gcode_flavor', 'RepRap (Marlin/Sprinter)')
1170 profile.putMachineSetting('has_heated_bed', 'True')
1171 profile.putProfileSetting('retraction_enable', 'True')
1172 profile.putPreference('startMode', 'Simple')
1173 profile.putProfileSetting('wall_thickness', float(profile.getProfileSetting('nozzle_size')) * 2)
1174 profile.checkAndUpdateMachineName()
1176 class LulzbotReadyPage(InfoPage):
1177 def __init__(self, parent):
1178 super(LulzbotReadyPage, self).__init__(parent, _("LulzBot TAZ/Mini"))
1179 self.AddText(_('Cura is now ready to be used with your LulzBot 3D printer.'))
1181 self.AddText(_('For more information about using Cura with your LulzBot'))
1182 self.AddText(_('3D printer, please visit www.LulzBot.com/cura'))
1185 class LulzbotMiniToolheadSelectPage(InfoPage):
1186 def __init__(self, parent, allowBack = True):
1187 super(LulzbotMiniToolheadSelectPage, self).__init__(parent, _("LulzBot Mini Tool Head Selection"))
1189 self.allowBack = allowBack
1190 self.panel = self.AddPanel()
1191 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1192 self.standard = self.AddImageButton(self.panel, 0, 0, _('Standard LulzBot Mini'),
1193 'Lulzbot_mini.jpg', image_size,
1194 style=ImageButton.IB_GROUP)
1195 self.flexy = self.AddImageButton(self.panel, 0, 1, _('LulzBot Mini with Flexystruder'),
1196 'Lulzbot_Toolhead_Mini_Flexystruder.jpg', image_size)
1197 self.standard.SetValue(True)
1199 def AllowBack(self):
1200 return self.allowBack
1202 def StoreData(self):
1203 if self.standard.GetValue():
1204 profile.putProfileSetting('nozzle_size', '0.5')
1205 profile.putMachineSetting('extruder_amount', '1')
1206 profile.putMachineSetting('toolhead', 'Single Extruder v2')
1207 profile.putMachineSetting('toolhead_shortname', '')
1208 profile.putMachineSetting('machine_type', 'lulzbot_mini')
1210 profile.putProfileSetting('nozzle_size', '0.6')
1211 profile.putMachineSetting('extruder_amount', '1')
1212 profile.putMachineSetting('toolhead', 'Flexystruder v2')
1213 profile.putMachineSetting('toolhead_shortname', 'Flexystruder')
1214 profile.putMachineSetting('machine_type', 'lulzbot_mini_flexystruder')
1217 class LulzbotTazSelectPage(InfoPage):
1218 def __init__(self, parent):
1219 super(LulzbotTazSelectPage, self).__init__(parent, _("LulzBot TAZ Selection"))
1221 self.panel = self.AddPanel()
1222 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1223 self.taz5 = self.AddImageButton(self.panel, 0, 0, _('Stock TAZ 5 (PEI && v2)'),
1224 'Lulzbot_TAZ_5_Hex_and_PEI.jpg', image_size,
1225 style=ImageButton.IB_GROUP)
1226 self.taz5.OnSelected(self.OnTaz5Selected)
1227 self.taz4 = self.AddImageButton(self.panel, 0, 1, _('Stock TAZ 4 (PET && v1)'),
1228 'Lulzbot_TAZ_4_Buda_and_PET.jpg', image_size)
1229 self.taz4.OnSelected(self.OnTaz4Selected)
1230 self.modified = self.AddImageButton(self.panel, 1, 0, _('Modified LulzBot TAZ 4 or 5'),
1231 'Lulzbot_TAZ5.jpg', image_size)
1232 self.modified.OnSelected(self.OnModifiedSelected)
1233 self.taz5.SetValue(True)
1235 def OnPageShown(self):
1236 self.taz5.TriggerGroupCallbacks()
1238 def OnTaz5Selected(self):
1239 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1240 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage,
1241 self.GetParent().lulzbotReadyPage)
1243 def OnTaz4Selected(self):
1244 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage)
1246 def OnModifiedSelected(self):
1247 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazBedSelectPage)
1248 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTazBedSelectPage,
1249 self.GetParent().lulzbotTazHotendPage)
1251 def StoreData(self):
1252 if self.taz5.GetValue():
1253 profile.putProfileSetting('nozzle_size', '0.5')
1254 profile.putMachineSetting('extruder_amount', '1')
1255 profile.putMachineSetting('toolhead', 'Single Extruder V2')
1256 profile.putMachineSetting('toolhead_shortname', '')
1257 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5_SingleV2')
1258 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5')
1259 elif self.taz4.GetValue():
1260 profile.putProfileSetting('nozzle_size', '0.35')
1261 profile.putMachineSetting('extruder_amount', '1')
1262 profile.putMachineSetting('toolhead', 'Single Extruder V1')
1263 profile.putMachineSetting('toolhead_shortname', '')
1264 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4_SingleV1')
1265 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
1267 class LulzbotTazBedSelectPage(InfoPage):
1268 def __init__(self, parent):
1269 super(LulzbotTazBedSelectPage, self).__init__(parent, _("Bed Surface"))
1271 self.panel = self.AddPanel()
1272 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1273 self.pei = self.AddImageButton(self.panel, 0, 0, _('PEI'),
1274 'Lulzbot_TAZ_PEI_Bed.jpg', image_size,
1275 style=ImageButton.IB_GROUP)
1276 self.pet = self.AddImageButton(self.panel, 0, 1, _('PET'),
1277 'Lulzbot_TAZ_PET_Bed.jpg', image_size)
1278 self.pei.SetValue(True)
1280 def StoreData(self):
1281 if self.pei.GetValue():
1282 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_5')
1283 profile.putMachineSetting('machine_name', 'LulzBot TAZ 5')
1285 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_4')
1286 profile.putMachineSetting('machine_name', 'LulzBot TAZ 4')
1289 class LulzbotTazToolheadSelectPage(InfoPage):
1290 def __init__(self, parent):
1291 super(LulzbotTazToolheadSelectPage, self).__init__(parent, _("LulzBot TAZ Tool Head Selection"))
1293 self.panel = self.AddPanel()
1294 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1295 self.single = self.AddImageButton(self.panel, 0, 0, _('Single Extruder v1'),
1296 'Lulzbot_Toolhead_TAZ_Single_v1.jpg', image_size,
1297 style=ImageButton.IB_GROUP)
1298 self.flexy = self.AddImageButton(self.panel, 0, 1, _('Flexystruder v1'),
1299 'Lulzbot_Toolhead_TAZ_Flexystruder_v1.jpg', image_size)
1300 self.dually = self.AddImageButton(self.panel, 1, 0, _('Dual Extruder v1'),
1301 'Lulzbot_Toolhead_TAZ_Dual_Extruder_v1.jpg', image_size)
1302 self.flexydually = self.AddImageButton(self.panel, 1, 1, _('FlexyDually v1'),
1303 'Lulzbot_Toolhead_TAZ_FlexyDually_v1.jpg', image_size)
1305 self.single.SetValue(True)
1307 def SetVersion(self, version):
1308 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1309 self.single.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Single_v%d.jpg' % version, image_size))
1310 self.single.SetLabel(_('Single Extruder v%d' % version))
1311 self.flexy.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Flexystruder_v%d.jpg' % version, image_size))
1312 self.flexy.SetLabel(_('Flexystruder v%d' % version))
1313 self.dually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_Dual_Extruder_v%d.jpg' % version, image_size))
1314 self.dually.SetLabel(_('Dual Extruder v%d' % version))
1315 self.flexydually.SetBitmap(self.GetBitmap('Lulzbot_Toolhead_TAZ_FlexyDually_v%d.jpg' % version, image_size))
1316 self.flexydually.SetLabel(_('FlexyDually v%d' % version))
1317 self.version = version
1319 self.single.OnSelected(None)
1320 self.flexy.OnSelected(None)
1321 self.dually.OnSelected(None)
1322 self.flexydually.OnSelected(None)
1323 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1325 self.single.OnSelected(self.OnSingleV2)
1326 self.flexy.OnSelected(self.OnNonSingle)
1327 self.dually.OnSelected(self.OnNonSingle)
1328 self.flexydually.OnSelected(self.OnNonSingle)
1329 if self.single.GetValue():
1330 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1331 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotFirmwarePage)
1333 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1334 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotFirmwarePage, self.GetParent().lulzbotReadyPage)
1336 def OnSingleV2(self):
1337 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz5NozzleSelectPage)
1338 wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotTaz5NozzleSelectPage, self.GetParent().lulzbotFirmwarePage)
1340 def OnNonSingle(self):
1341 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotFirmwarePage)
1343 def StoreData(self):
1344 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1348 version = (taz_version, self.version)
1349 if self.single.GetValue():
1350 profile.putProfileSetting('nozzle_size', '0.5' if self.version == 2 else '0.35')
1351 profile.putMachineSetting('extruder_amount', '1')
1352 profile.putMachineSetting('toolhead', 'Single Extruder V%d' % self.version)
1353 profile.putMachineSetting('toolhead_shortname', '')
1354 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_SingleV%d' % version)
1355 elif self.flexy.GetValue():
1356 profile.putProfileSetting('nozzle_size', '0.6')
1357 profile.putMachineSetting('extruder_amount', '1')
1358 profile.putMachineSetting('toolhead', 'Flexystruder V%d' % self.version)
1359 profile.putMachineSetting('toolhead_shortname', 'Flexystruder v%d' % self.version)
1360 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexystruderV%d' % version)
1361 elif self.dually.GetValue():
1362 profile.putProfileSetting('nozzle_size', '0.5')
1363 profile.putMachineSetting('extruder_amount', '2')
1364 profile.putMachineSetting('extruder_offset_x1', '0.0')
1365 profile.putMachineSetting('extruder_offset_y1', '-50.0' if self.version == 2 else '-52.00')
1366 profile.putMachineSetting('toolhead', 'Dual Extruder V%d' % self.version)
1367 profile.putMachineSetting('toolhead_shortname', 'Dual v%d' % self.version)
1368 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_DualV%d' % version)
1369 elif self.flexydually.GetValue():
1370 profile.putProfileSetting('nozzle_size', '0.6')
1371 profile.putMachineSetting('extruder_amount', '2')
1372 profile.putMachineSetting('extruder_offset_x1', '0.0')
1373 profile.putMachineSetting('extruder_offset_y1', '-50.0' if self.version == 2 else '-52.00')
1374 profile.putMachineSetting('toolhead', 'FlexyDually V%d' % self.version)
1375 profile.putMachineSetting('toolhead_shortname', 'FlexyDually v%d' % self.version)
1376 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_FlexyDuallyV%d' % version)
1379 class LulzbotHotendSelectPage(InfoPage):
1380 def __init__(self, parent, allowBack = True):
1381 super(LulzbotHotendSelectPage, self).__init__(parent, _("LulzBot Tool Head Hot end Selection"))
1383 self.allowBack = allowBack
1384 self.panel = self.AddPanel()
1385 image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT)
1386 self.v1 = self.AddImageButton(self.panel, 0, 0, _('v1 (Budaschnozzle)'),
1387 'Lulzbot_Toolhead_v1.jpg', image_size,
1388 style=ImageButton.IB_GROUP)
1389 self.v2 = self.AddImageButton(self.panel, 0, 1, _('v2 (LulzBot Hexagon)'),
1390 'Lulzbot_Toolhead_v2.jpg', image_size)
1391 self.v1.SetValue(True)
1393 def AllowBack(self):
1394 return self.allowBack
1396 def StoreData(self):
1397 self.GetParent().lulzbotTazToolheadPage.SetVersion(1 if self.v1.GetValue() else 2)
1399 class LulzbotTaz5NozzleSelectPage(InfoPage):
1400 url2='http://lulzbot.com/printer-identification'
1402 def __init__(self, parent):
1403 super(LulzbotTaz5NozzleSelectPage, self).__init__(parent, _("LulzBot TAZ Single v2 Nozzle Selection"))
1405 self.AddText(_('Please select your LulzBot Hexagon Hot End\'s nozzle diameter:'))
1406 self.Nozzle35Radio = self.AddRadioButton("0.35 mm", style=wx.RB_GROUP)
1407 self.Nozzle35Radio.SetValue(True)
1408 self.Nozzle50Radio = self.AddRadioButton("0.5 mm")
1409 self.AddText(_(' '))
1412 self.AddText(_('If you are not sure which nozzle diameter you have,'))
1413 self.AddText(_('please check this webpage: '))
1414 button = self.AddButton(LulzbotTaz5NozzleSelectPage.url2)
1415 button.Bind(wx.EVT_BUTTON, self.OnUrlClick)
1417 def OnUrlClick(self, e):
1418 webbrowser.open(LulzbotTaz5NozzleSelectPage.url2)
1420 def StoreData(self):
1421 if profile.getMachineSetting('machine_type').startswith('lulzbot_TAZ_4'):
1425 if self.Nozzle35Radio.GetValue():
1426 profile.putProfileSetting('nozzle_size', '0.35')
1427 profile.putMachineSetting('toolhead', 'Single Extruder v2 (0.35mm nozzle)')
1428 profile.putMachineSetting('toolhead_shortname', '0.35 nozzle')
1429 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_035nozzle' % taz_version)
1432 profile.putProfileSetting('nozzle_size', '0.5')
1433 profile.putMachineSetting('toolhead', 'Single Extruder v2 (0.5mm nozzle)')
1434 profile.putMachineSetting('toolhead_shortname', '0.5 nozzle')
1435 profile.putMachineSetting('machine_type', 'lulzbot_TAZ_%d_05nozzle' % taz_version)
1437 class LulzbotFirmwareUpdatePage(InfoPage):
1438 def __init__(self, parent):
1439 super(LulzbotFirmwareUpdatePage, self).__init__(parent, _("LulzBot Firmware Update"))
1441 self.AddText(_("Your LulzBot printer\'s firmware will now be updated.\n" +
1442 "Note: this will overwrite your existing firmware."))
1444 self.AddText(_("Follow these steps to prevent writing firmware to the wrong device:\n" +
1445 " 1) Unplug all USB devices from your computer\n" +
1446 " 2) Plug your 3D Printer into the computer with a USB cable\n" +
1447 " 3) Turn on your 3D Printer\n" +
1448 " 4) Click \"Flash the firmware\""))
1449 self.AddHiddenSeperator()
1450 upgradeButton, skipUpgradeButton = self.AddDualButton(_('Flash the firmware'), _('Skip upgrade'))
1451 upgradeButton.Bind(wx.EVT_BUTTON, self.OnUpgradeClick)
1452 skipUpgradeButton.Bind(wx.EVT_BUTTON, self.OnSkipClick)
1454 def AllowNext(self):
1455 return version.isDevVersion()
1457 def OnUpgradeClick(self, e):
1458 if firmwareInstall.InstallFirmware():
1459 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
1460 self.GetParent().ShowPage(self.GetNext())
1462 def OnSkipClick(self, e):
1463 dlg = wx.MessageDialog(self,
1464 _("CAUTION: Updating firmware is necessary when changing the\n" \
1465 "tool head on your LulzBot desktop 3D Printer." \
1467 "Are you sure you want to skip the firmware update?"),
1468 _('Skip firmware update?'),
1469 wx.YES_NO | wx.ICON_EXCLAMATION)
1470 skip = dlg.ShowModal() == wx.ID_YES
1473 self.GetParent().FindWindowById(wx.ID_FORWARD).Enable()
1474 self.GetParent().ShowPage(self.GetNext())
1476 class LulzbotChangeToolheadWizard(wx.wizard.Wizard):
1478 super(LulzbotChangeToolheadWizard, self).__init__(None, -1, _("Change LulzBot Tool Head Wizard"))
1480 self._nozzle_size = profile.getProfileSettingFloat('nozzle_size')
1481 self._machine_name = profile.getMachineSetting('machine_name')
1482 self._machine_type = profile.getMachineSetting('machine_type')
1483 self._extruder_amount = int(profile.getMachineSettingFloat('extruder_amount'))
1485 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1486 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1487 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1489 self.lulzbotReadyPage = LulzbotReadyPage(self)
1490 self.lulzbotFirmwarePage = LulzbotFirmwareUpdatePage(self)
1491 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self, False)
1492 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1493 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self, False)
1494 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1495 self.lulzbotTazBedSelectPage = LulzbotTazBedSelectPage(self)
1496 self.lulzbotTazSelectPage = LulzbotTazSelectPage(self)
1498 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage)
1499 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1501 if profile.getMachineSetting('machine_type').startswith('lulzbot_mini'):
1502 self.RunWizard(self.lulzbotMiniToolheadPage)
1504 self.RunWizard(self.lulzbotTazHotendPage)
1507 def OnPageChanging(self, e):
1508 e.GetPage().StoreData()
1510 def OnPageChanged(self, e):
1511 if e.GetPage().AllowNext():
1512 self.FindWindowById(wx.ID_FORWARD).Enable()
1514 self.FindWindowById(wx.ID_FORWARD).Disable()
1515 if e.GetPage().AllowBack():
1516 self.FindWindowById(wx.ID_BACKWARD).Enable()
1518 self.FindWindowById(wx.ID_BACKWARD).Disable()
1519 if hasattr(e.GetPage(), 'OnPageShown'):
1520 e.GetPage().OnPageShown()
1522 def OnCancel(self, e):
1523 profile.putProfileSetting('nozzle_size', self._nozzle_size)
1524 profile.putMachineSetting('machine_name', self._machine_name)
1525 profile.putMachineSetting('machine_type', self._machine_type)
1526 profile.putMachineSetting('extruder_amount', self._extruder_amount)
1528 class ConfigWizard(wx.wizard.Wizard):
1529 def __init__(self, addNew = False):
1530 super(ConfigWizard, self).__init__(None, -1, _("Configuration Wizard"))
1532 self._old_machine_index = int(profile.getPreferenceFloat('active_machine'))
1534 profile.setActiveMachine(profile.getMachineCount())
1536 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
1537 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
1538 self.Bind(wx.wizard.EVT_WIZARD_CANCEL, self.OnCancel)
1540 self.machineSelectPage = MachineSelectPage(self)
1541 self.ultimakerSelectParts = SelectParts(self)
1542 self.ultimakerFirmwareUpgradePage = UltimakerFirmwareUpgradePage(self)
1543 self.ultimakerCheckupPage = UltimakerCheckupPage(self)
1544 self.ultimakerCalibrationPage = UltimakerCalibrationPage(self)
1545 self.ultimakerCalibrateStepsPerEPage = UltimakerCalibrateStepsPerEPage(self)
1546 self.bedLevelPage = bedLevelWizardMain(self)
1547 self.headOffsetCalibration = headOffsetCalibrationPage(self)
1548 self.printrbotSelectType = PrintrbotPage(self)
1549 self.otherMachineSelectPage = OtherMachineSelectPage(self)
1550 self.customRepRapInfoPage = CustomRepRapInfoPage(self)
1551 self.otherMachineInfoPage = OtherMachineInfoPage(self)
1553 self.ultimaker2ReadyPage = Ultimaker2ReadyPage(self)
1554 self.lulzbotReadyPage = LulzbotReadyPage(self)
1555 self.lulzbotFirmwarePage = LulzbotFirmwareUpdatePage(self)
1556 self.lulzbotMiniToolheadPage = LulzbotMiniToolheadSelectPage(self)
1557 self.lulzbotTazToolheadPage = LulzbotTazToolheadSelectPage(self)
1558 self.lulzbotTazHotendPage = LulzbotHotendSelectPage(self)
1559 self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self)
1560 self.lulzbotMachineSelectPage = LulzbotMachineSelectPage(self)
1561 self.lulzbotTazBedSelectPage = LulzbotTazBedSelectPage(self)
1562 self.lulzbotTazSelectPage = LulzbotTazSelectPage(self)
1564 wx.wizard.WizardPageSimple.Chain(self.lulzbotMachineSelectPage, self.lulzbotMiniToolheadPage)
1565 wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage)
1566 wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage)
1567 wx.wizard.WizardPageSimple.Chain(self.machineSelectPage, self.ultimakerSelectParts)
1568 wx.wizard.WizardPageSimple.Chain(self.ultimakerSelectParts, self.ultimakerFirmwareUpgradePage)
1569 wx.wizard.WizardPageSimple.Chain(self.ultimakerFirmwareUpgradePage, self.ultimakerCheckupPage)
1570 wx.wizard.WizardPageSimple.Chain(self.ultimakerCheckupPage, self.bedLevelPage)
1571 wx.wizard.WizardPageSimple.Chain(self.printrbotSelectType, self.otherMachineInfoPage)
1572 wx.wizard.WizardPageSimple.Chain(self.otherMachineSelectPage, self.customRepRapInfoPage)
1574 self.RunWizard(self.lulzbotMachineSelectPage)
1577 def OnPageChanging(self, e):
1578 e.GetPage().StoreData()
1580 def OnPageChanged(self, e):
1581 if e.GetPage().AllowNext():
1582 self.FindWindowById(wx.ID_FORWARD).Enable()
1584 self.FindWindowById(wx.ID_FORWARD).Disable()
1585 if e.GetPage().AllowBack():
1586 self.FindWindowById(wx.ID_BACKWARD).Enable()
1588 self.FindWindowById(wx.ID_BACKWARD).Disable()
1589 if hasattr(e.GetPage(), 'OnPageShown'):
1590 e.GetPage().OnPageShown()
1592 def OnCancel(self, e):
1593 new_machine_index = int(profile.getPreferenceFloat('active_machine'))
1594 profile.setActiveMachine(self._old_machine_index)
1595 profile.removeMachine(new_machine_index)
1597 class bedLevelWizardMain(InfoPage):
1598 def __init__(self, parent):
1599 super(bedLevelWizardMain, self).__init__(parent, _("Bed leveling wizard"))
1601 self.AddText(_('This wizard will help you in leveling your printer bed'))
1603 self.AddText(_('It will do the following steps'))
1604 self.AddText(_('* Move the printer head to each corner'))
1605 self.AddText(_(' and let you adjust the height of the bed to the nozzle'))
1606 self.AddText(_('* Print a line around the bed to check if it is level'))
1609 self.connectButton = self.AddButton(_('Connect to printer'))
1612 self.infoBox = self.AddInfoBox()
1613 self.resumeButton = self.AddButton(_('Resume'))
1614 self.upButton, self.downButton = self.AddDualButton(_('Up 0.2mm'), _('Down 0.2mm'))
1615 self.upButton2, self.downButton2 = self.AddDualButton(_('Up 10mm'), _('Down 10mm'))
1616 self.resumeButton.Enable(False)
1618 self.upButton.Enable(False)
1619 self.downButton.Enable(False)
1620 self.upButton2.Enable(False)
1621 self.downButton2.Enable(False)
1623 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1624 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1625 self.Bind(wx.EVT_BUTTON, self.OnBedUp, self.upButton)
1626 self.Bind(wx.EVT_BUTTON, self.OnBedDown, self.downButton)
1627 self.Bind(wx.EVT_BUTTON, self.OnBedUp2, self.upButton2)
1628 self.Bind(wx.EVT_BUTTON, self.OnBedDown2, self.downButton2)
1630 def OnConnect(self, e = None):
1631 if self.comm is not None:
1635 wx.CallAfter(self.OnConnect)
1637 self.connectButton.Enable(False)
1638 self.comm = machineCom.MachineCom(callbackObject=self)
1639 self.infoBox.SetBusy(_('Connecting to machine.'))
1640 self._wizardState = 0
1642 def OnBedUp(self, e):
1643 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1644 self.comm.sendCommand('G92 Z10')
1645 self.comm.sendCommand('G1 Z9.8 F%d' % (feedZ))
1646 self.comm.sendCommand('M400')
1648 def OnBedDown(self, e):
1649 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1650 self.comm.sendCommand('G92 Z10')
1651 self.comm.sendCommand('G1 Z10.2 F%d' % (feedZ))
1652 self.comm.sendCommand('M400')
1654 def OnBedUp2(self, e):
1655 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1656 self.comm.sendCommand('G92 Z10')
1657 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1658 self.comm.sendCommand('M400')
1660 def OnBedDown2(self, e):
1661 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1662 self.comm.sendCommand('G92 Z10')
1663 self.comm.sendCommand('G1 Z20 F%d' % (feedZ))
1664 self.comm.sendCommand('M400')
1666 def AllowNext(self):
1667 if self.GetParent().headOffsetCalibration is not None and int(profile.getMachineSetting('extruder_amount')) > 1:
1668 wx.wizard.WizardPageSimple.Chain(self, self.GetParent().headOffsetCalibration)
1671 def OnResume(self, e):
1672 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1673 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1674 if self._wizardState == -1:
1675 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer...'))
1676 wx.CallAfter(self.upButton.Enable, False)
1677 wx.CallAfter(self.downButton.Enable, False)
1678 wx.CallAfter(self.upButton2.Enable, False)
1679 wx.CallAfter(self.downButton2.Enable, False)
1680 self.comm.sendCommand('M105')
1681 self.comm.sendCommand('G28')
1682 self._wizardState = 1
1683 elif self._wizardState == 2:
1684 if profile.getMachineSetting('has_heated_bed') == 'True':
1685 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back center...'))
1686 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1687 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') / 2.0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1688 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1689 self.comm.sendCommand('M400')
1690 self._wizardState = 3
1692 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back left corner...'))
1693 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1694 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, profile.getMachineSettingFloat('machine_depth'), feedTravel))
1695 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1696 self.comm.sendCommand('M400')
1697 self._wizardState = 3
1698 elif self._wizardState == 4:
1699 if profile.getMachineSetting('has_heated_bed') == 'True':
1700 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1701 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1702 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 5, feedTravel))
1703 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1704 self.comm.sendCommand('M400')
1705 self._wizardState = 7
1707 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to back right corner...'))
1708 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1709 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, profile.getMachineSettingFloat('machine_depth') - 25, feedTravel))
1710 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1711 self.comm.sendCommand('M400')
1712 self._wizardState = 5
1713 elif self._wizardState == 6:
1714 wx.CallAfter(self.infoBox.SetBusy, _('Moving head to front right corner...'))
1715 self.comm.sendCommand('G1 Z3 F%d' % (feedZ))
1716 self.comm.sendCommand('G1 X%d Y%d F%d' % (profile.getMachineSettingFloat('machine_width') - 5.0, 20, feedTravel))
1717 self.comm.sendCommand('G1 Z0 F%d' % (feedZ))
1718 self.comm.sendCommand('M400')
1719 self._wizardState = 7
1720 elif self._wizardState == 8:
1721 wx.CallAfter(self.infoBox.SetBusy, _('Heating up printer...'))
1722 self.comm.sendCommand('G1 Z15 F%d' % (feedZ))
1723 self.comm.sendCommand('M104 S%d' % (profile.getProfileSettingFloat('print_temperature')))
1724 self.comm.sendCommand('G1 X%d Y%d F%d' % (0, 0, feedTravel))
1725 self._wizardState = 9
1726 elif self._wizardState == 10:
1727 self._wizardState = 11
1728 wx.CallAfter(self.infoBox.SetInfo, _('Printing a square on the printer bed at 0.3mm height.'))
1729 feedZ = profile.getProfileSettingFloat('print_speed') * 60
1730 feedPrint = profile.getProfileSettingFloat('print_speed') * 60
1731 feedTravel = profile.getProfileSettingFloat('travel_speed') * 60
1732 w = profile.getMachineSettingFloat('machine_width') - 10
1733 d = profile.getMachineSettingFloat('machine_depth')
1734 filamentRadius = profile.getProfileSettingFloat('filament_diameter') / 2
1735 filamentArea = math.pi * filamentRadius * filamentRadius
1736 ePerMM = (profile.calculateEdgeWidth() * 0.3) / filamentArea
1740 'G1 Z2 F%d' % (feedZ),
1742 'G1 X%d Y%d F%d' % (5, 5, feedTravel),
1743 'G1 Z0.3 F%d' % (feedZ)]
1745 gcodeList.append('G1 E%f F%d' % (eValue, profile.getProfileSettingFloat('retraction_speed') * 60))
1747 for i in xrange(0, 3):
1748 dist = 5.0 + 0.4 * float(i)
1749 eValue += (d - 2.0*dist) * ePerMM
1750 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, d - dist, eValue, feedPrint))
1751 eValue += (w - 2.0*dist) * ePerMM
1752 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, d - dist, eValue, feedPrint))
1753 eValue += (d - 2.0*dist) * ePerMM
1754 gcodeList.append('G1 X%f Y%f E%f F%d' % (w - dist, dist, eValue, feedPrint))
1755 eValue += (w - 2.0*dist) * ePerMM
1756 gcodeList.append('G1 X%f Y%f E%f F%d' % (dist, dist, eValue, feedPrint))
1758 gcodeList.append('M400')
1759 self.comm.printGCode(gcodeList)
1760 self.resumeButton.Enable(False)
1762 def mcLog(self, message):
1763 print 'Log:', message
1765 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1766 if self._wizardState == 1:
1767 self._wizardState = 2
1768 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front left screw of your printer bed\nSo the nozzle just hits the bed.'))
1769 wx.CallAfter(self.resumeButton.Enable, True)
1770 elif self._wizardState == 3:
1771 self._wizardState = 4
1772 if profile.getMachineSetting('has_heated_bed') == 'True':
1773 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back screw of your printer bed\nSo the nozzle just hits the bed.'))
1775 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back left screw of your printer bed\nSo the nozzle just hits the bed.'))
1776 wx.CallAfter(self.resumeButton.Enable, True)
1777 elif self._wizardState == 5:
1778 self._wizardState = 6
1779 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the back right screw of your printer bed\nSo the nozzle just hits the bed.'))
1780 wx.CallAfter(self.resumeButton.Enable, True)
1781 elif self._wizardState == 7:
1782 self._wizardState = 8
1783 wx.CallAfter(self.infoBox.SetAttention, _('Adjust the front right screw of your printer bed\nSo the nozzle just hits the bed.'))
1784 wx.CallAfter(self.resumeButton.Enable, True)
1785 elif self._wizardState == 9:
1786 if temp[0] < profile.getProfileSettingFloat('print_temperature') - 5:
1787 wx.CallAfter(self.infoBox.SetInfo, _('Heating up printer: %d/%d') % (temp[0], profile.getProfileSettingFloat('print_temperature')))
1789 wx.CallAfter(self.infoBox.SetAttention, _('The printer is hot now. Please insert some PLA filament into the printer.'))
1790 wx.CallAfter(self.resumeButton.Enable, True)
1791 self._wizardState = 10
1793 def mcStateChange(self, state):
1794 if self.comm is None:
1796 if self.comm.isOperational():
1797 if self._wizardState == 0:
1798 wx.CallAfter(self.infoBox.SetAttention, _('Use the up/down buttons to move the bed and adjust your Z endstop.'))
1799 wx.CallAfter(self.upButton.Enable, True)
1800 wx.CallAfter(self.downButton.Enable, True)
1801 wx.CallAfter(self.upButton2.Enable, True)
1802 wx.CallAfter(self.downButton2.Enable, True)
1803 wx.CallAfter(self.resumeButton.Enable, True)
1804 self._wizardState = -1
1805 elif self._wizardState == 11 and not self.comm.isPrinting():
1806 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
1807 self.comm.sendCommand('G92 E0')
1808 self.comm.sendCommand('G1 E-10 F%d' % (profile.getProfileSettingFloat('retraction_speed') * 60))
1809 self.comm.sendCommand('M104 S0')
1810 wx.CallAfter(self.infoBox.SetInfo, _('Calibration finished.\nThe squares on the bed should slightly touch each other.'))
1811 wx.CallAfter(self.infoBox.SetReadyIndicator)
1812 wx.CallAfter(self.GetParent().FindWindowById(wx.ID_FORWARD).Enable)
1813 wx.CallAfter(self.connectButton.Enable, True)
1814 self._wizardState = 12
1815 elif self.comm.isError():
1816 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
1818 def mcMessage(self, message):
1821 def mcProgress(self, lineNr):
1824 def mcZChange(self, newZ):
1827 class headOffsetCalibrationPage(InfoPage):
1828 def __init__(self, parent):
1829 super(headOffsetCalibrationPage, self).__init__(parent, _("Printer head offset calibration"))
1831 self.AddText(_('This wizard will help you in calibrating the printer head offsets of your dual extrusion machine'))
1834 self.connectButton = self.AddButton(_('Connect to printer'))
1837 self.infoBox = self.AddInfoBox()
1838 self.textEntry = self.AddTextCtrl('')
1839 self.textEntry.Enable(False)
1840 self.resumeButton = self.AddButton(_('Resume'))
1841 self.resumeButton.Enable(False)
1843 self.Bind(wx.EVT_BUTTON, self.OnConnect, self.connectButton)
1844 self.Bind(wx.EVT_BUTTON, self.OnResume, self.resumeButton)
1846 def AllowBack(self):
1849 def OnConnect(self, e = None):
1850 if self.comm is not None:
1854 wx.CallAfter(self.OnConnect)
1856 self.connectButton.Enable(False)
1857 self.comm = machineCom.MachineCom(callbackObject=self)
1858 self.infoBox.SetBusy(_('Connecting to machine.'))
1859 self._wizardState = 0
1861 def OnResume(self, e):
1862 if self._wizardState == 2:
1863 self._wizardState = 3
1864 wx.CallAfter(self.infoBox.SetBusy, _('Printing initial calibration cross'))
1866 w = profile.getMachineSettingFloat('machine_width')
1867 d = profile.getMachineSettingFloat('machine_depth')
1869 gcode = gcodeGenerator.gcodeGenerator()
1870 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1871 gcode.setPrintSpeed(profile.getProfileSettingFloat('bottom_layer_speed'))
1878 gcode.addMove(w/2, 5)
1879 gcode.addMove(z=0.2)
1881 gcode.addExtrude(w/2, d-5.0)
1883 gcode.addMove(5, d/2)
1885 gcode.addExtrude(w-5.0, d/2)
1886 gcode.addRetract(15)
1889 gcode.addMove(w/2, 5)
1891 gcode.addExtrude(w/2, d-5.0)
1893 gcode.addMove(5, d/2)
1895 gcode.addExtrude(w-5.0, d/2)
1896 gcode.addRetract(15)
1901 gcode.addCmd('M400')
1903 self.comm.printGCode(gcode.list())
1904 self.resumeButton.Enable(False)
1905 elif self._wizardState == 4:
1907 float(self.textEntry.GetValue())
1910 profile.putPreference('extruder_offset_x1', self.textEntry.GetValue())
1911 self._wizardState = 5
1912 self.infoBox.SetAttention(_('Please measure the distance between the horizontal lines in millimeters.'))
1913 self.textEntry.SetValue('0.0')
1914 self.textEntry.Enable(True)
1915 elif self._wizardState == 5:
1917 float(self.textEntry.GetValue())
1920 profile.putPreference('extruder_offset_y1', self.textEntry.GetValue())
1921 self._wizardState = 6
1922 self.infoBox.SetBusy(_('Printing the fine calibration lines.'))
1923 self.textEntry.SetValue('')
1924 self.textEntry.Enable(False)
1925 self.resumeButton.Enable(False)
1927 x = profile.getMachineSettingFloat('extruder_offset_x1')
1928 y = profile.getMachineSettingFloat('extruder_offset_y1')
1929 gcode = gcodeGenerator.gcodeGenerator()
1930 gcode.setExtrusionRate(profile.getProfileSettingFloat('nozzle_size') * 1.5, 0.2)
1931 gcode.setPrintSpeed(25)
1934 gcode.addMove(50, 40, 0.2)
1936 for n in xrange(0, 10):
1937 gcode.addExtrude(50 + n * 10, 150)
1938 gcode.addExtrude(50 + n * 10 + 5, 150)
1939 gcode.addExtrude(50 + n * 10 + 5, 40)
1940 gcode.addExtrude(50 + n * 10 + 10, 40)
1941 gcode.addMove(40, 50)
1942 for n in xrange(0, 10):
1943 gcode.addExtrude(150, 50 + n * 10)
1944 gcode.addExtrude(150, 50 + n * 10 + 5)
1945 gcode.addExtrude(40, 50 + n * 10 + 5)
1946 gcode.addExtrude(40, 50 + n * 10 + 10)
1947 gcode.addRetract(15)
1950 gcode.addMove(50 - x, 30 - y, 0.2)
1952 for n in xrange(0, 10):
1953 gcode.addExtrude(50 + n * 10.2 - 1.0 - x, 140 - y)
1954 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 140 - y)
1955 gcode.addExtrude(50 + n * 10.2 - 1.0 + 5.1 - x, 30 - y)
1956 gcode.addExtrude(50 + n * 10.2 - 1.0 + 10 - x, 30 - y)
1957 gcode.addMove(30 - x, 50 - y, 0.2)
1958 for n in xrange(0, 10):
1959 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 - y)
1960 gcode.addExtrude(160 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1961 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 5.1 - y)
1962 gcode.addExtrude(30 - x, 50 + n * 10.2 - 1.0 + 10 - y)
1963 gcode.addRetract(15)
1965 gcode.addCmd('M400')
1966 gcode.addCmd('M104 T0 S0')
1967 gcode.addCmd('M104 T1 S0')
1968 self.comm.printGCode(gcode.list())
1969 elif self._wizardState == 7:
1971 n = int(self.textEntry.GetValue()) - 1
1974 x = profile.getMachineSettingFloat('extruder_offset_x1')
1976 profile.putPreference('extruder_offset_x1', '%0.2f' % (x))
1977 self.infoBox.SetAttention(_('Which horizontal line number lays perfect on top of each other? Front most line is zero.'))
1978 self.textEntry.SetValue('10')
1979 self._wizardState = 8
1980 elif self._wizardState == 8:
1982 n = int(self.textEntry.GetValue()) - 1
1985 y = profile.getMachineSettingFloat('extruder_offset_y1')
1987 profile.putPreference('extruder_offset_y1', '%0.2f' % (y))
1988 self.infoBox.SetInfo(_('Calibration finished. Offsets are: %s %s') % (profile.getMachineSettingFloat('extruder_offset_x1'), profile.getMachineSettingFloat('extruder_offset_y1')))
1989 self.infoBox.SetReadyIndicator()
1990 self._wizardState = 8
1992 self.resumeButton.Enable(False)
1994 def mcLog(self, message):
1995 print 'Log:', message
1997 def mcTempUpdate(self, temp, bedTemp, targetTemp, bedTargetTemp):
1998 if self._wizardState == 1:
1999 if temp[0] >= 210 and temp[1] >= 210:
2000 self._wizardState = 2
2001 wx.CallAfter(self.infoBox.SetAttention, _('Please load both extruders with PLA.'))
2002 wx.CallAfter(self.resumeButton.Enable, True)
2003 wx.CallAfter(self.resumeButton.SetFocus)
2005 def mcStateChange(self, state):
2006 if self.comm is None:
2008 if self.comm.isOperational():
2009 if self._wizardState == 0:
2010 wx.CallAfter(self.infoBox.SetInfo, _('Homing printer and heating up both extruders.'))
2011 self.comm.sendCommand('M105')
2012 self.comm.sendCommand('M104 S220 T0')
2013 self.comm.sendCommand('M104 S220 T1')
2014 self.comm.sendCommand('G28')
2015 self.comm.sendCommand('G1 Z15 F%d' % (profile.getProfileSettingFloat('print_speed') * 60))
2016 self._wizardState = 1
2017 if not self.comm.isPrinting():
2018 if self._wizardState == 3:
2019 self._wizardState = 4
2020 wx.CallAfter(self.infoBox.SetAttention, _('Please measure the distance between the vertical lines in millimeters.'))
2021 wx.CallAfter(self.textEntry.SetValue, '0.0')
2022 wx.CallAfter(self.textEntry.Enable, True)
2023 wx.CallAfter(self.resumeButton.Enable, True)
2024 wx.CallAfter(self.resumeButton.SetFocus)
2025 elif self._wizardState == 6:
2026 self._wizardState = 7
2027 wx.CallAfter(self.infoBox.SetAttention, _('Which vertical line number lays perfect on top of each other? Leftmost line is zero.'))
2028 wx.CallAfter(self.textEntry.SetValue, '10')
2029 wx.CallAfter(self.textEntry.Enable, True)
2030 wx.CallAfter(self.resumeButton.Enable, True)
2031 wx.CallAfter(self.resumeButton.SetFocus)
2033 elif self.comm.isError():
2034 wx.CallAfter(self.infoBox.SetError, _('Failed to establish connection with the printer.'), 'http://wiki.ultimaker.com/Cura:_Connection_problems')
2036 def mcMessage(self, message):
2039 def mcProgress(self, lineNr):
2042 def mcZChange(self, newZ):
2045 class bedLevelWizard(wx.wizard.Wizard):
2047 super(bedLevelWizard, self).__init__(None, -1, _("Bed leveling wizard"))
2049 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
2050 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
2052 self.mainPage = bedLevelWizardMain(self)
2053 self.headOffsetCalibration = None
2055 self.RunWizard(self.mainPage)
2058 def OnPageChanging(self, e):
2059 e.GetPage().StoreData()
2061 def OnPageChanged(self, e):
2062 if e.GetPage().AllowNext():
2063 self.FindWindowById(wx.ID_FORWARD).Enable()
2065 self.FindWindowById(wx.ID_FORWARD).Disable()
2066 if e.GetPage().AllowBack():
2067 self.FindWindowById(wx.ID_BACKWARD).Enable()
2069 self.FindWindowById(wx.ID_BACKWARD).Disable()
2071 class headOffsetWizard(wx.wizard.Wizard):
2073 super(headOffsetWizard, self).__init__(None, -1, _("Head offset wizard"))
2075 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGED, self.OnPageChanged)
2076 self.Bind(wx.wizard.EVT_WIZARD_PAGE_CHANGING, self.OnPageChanging)
2078 self.mainPage = headOffsetCalibrationPage(self)
2080 self.RunWizard(self.mainPage)
2083 def OnPageChanging(self, e):
2084 e.GetPage().StoreData()
2086 def OnPageChanged(self, e):
2087 if e.GetPage().AllowNext():
2088 self.FindWindowById(wx.ID_FORWARD).Enable()
2090 self.FindWindowById(wx.ID_FORWARD).Disable()
2091 if e.GetPage().AllowBack():
2092 self.FindWindowById(wx.ID_BACKWARD).Enable()
2094 self.FindWindowById(wx.ID_BACKWARD).Disable()