X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ian/git?p=userv-utils.git;a=blobdiff_plain;f=ipif%2FINSTALL;h=71ba29d143b7ff62a3c99be516e2b7e9d76b6d42;hp=397a31d8b6c1753add5960c07b272bb3d3cf9b1c;hb=dd0d6c7ef9375390cfe9e633addc271f1be5fd0d;hpb=9028e234bb74a97396855e63d9ca598c1a554dc5

diff --git a/ipif/INSTALL b/ipif/INSTALL
index 397a31d..71ba29d 100644
--- a/ipif/INSTALL
+++ b/ipif/INSTALL
@@ -13,8 +13,7 @@ BUILD AND INSTALLATION INSTRUCTIONS
 
 1. Install userv, 1.0.1 or later.  This is in Debian GNU/Linux.
 
-2. Make sure your Linux kernel has SLIP and CSLIP compiled in.
-   You will need to be using Linux 2.2 (with Unix98-style ptys).
+2. Make sure your Linux kernel has SLIP and TUN compiled in.
 
 3. udptunnel works best if your ssh can do ssh-protocol-level
    keepalives.  Currently these are only supported by using a special
@@ -34,18 +33,6 @@ BUILD AND INSTALLATION INSTRUCTIONS
  setting up SLIP interfaces.  It might be possible in principle to
  create alternatives for other platforms.
 
-`slattach' problem:
-
- There is a problem with some versions of `slattach' on Linux.  If you
- see a message from it about being unable to open /dev/2 or some such,
- then you need to upgrade or patch your `slattach'.  In Debian
- GNU/Linux it's in the `netbase' package, and the fix is in Debian 2.1
- in 3.16-3 and later; however the bug has regressed, and is known to
- be in Debian 2.2's 3.18-4 and earlier.  The relevant Debian bug
- reports are #45515 (now closed) and #45944.  A patch to correct
- 3.18-4 is provided here as `slattach.diff', and a fixed binary is
- available from me.
-
 
 
 UDPTUNNEL SETUP TUTORIAL
@@ -489,14 +476,6 @@ UDPTUNNEL SETUP TUTORIAL
     invocations (ie, ones with a command specified) often have a
     different PATH.
 
-  slattach cannot open /dev/2 (or similar messages)
-    Your slattach is buggy.  See under `slattach problem' in the build
-    and installation instructions, above.
-
-  slattach cannot change line discipline (or some other weird message)
-    Check whether your kernel is compiled with SLIP and/or CSLIP
-    support.
-
  * Other messages:
 
   udptunnel-forwarder: alice: bad packet: blowfish-cbcmac: verify failed