#define _SLJIT_CONFIG_INTERNAL_H_
/*
- SLJIT defines the following macros depending on the target architecture:
-
- Feature detection (boolean) macros:
- SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
- SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
- SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
- SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing a double array by index
- SLJIT_LITTLE_ENDIAN : little endian architecture
- SLJIT_BIG_ENDIAN : big endian architecture
- SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
- SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
- SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
-
- Types and useful macros:
- sljit_sb, sljit_ub : signed and unsigned 8 bit byte
- sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type
- sljit_si, sljit_ui : signed and unsigned 32 bit integer type
- sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer
- sljit_p : unsgined pointer value (usually the same as sljit_uw, but
- some 64 bit ABIs may use 32 bit pointers)
- sljit_s : single precision floating point value
- sljit_d : double precision floating point value
- SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT
- SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
+ SLJIT defines the following architecture dependent types and macros:
+
+ Types:
+ sljit_sb, sljit_ub : signed and unsigned 8 bit byte
+ sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type
+ sljit_si, sljit_ui : signed and unsigned 32 bit integer type
+ sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer
+ sljit_p : unsgined pointer value (usually the same as sljit_uw, but
+ some 64 bit ABIs may use 32 bit pointers)
+ sljit_s : single precision floating point value
+ sljit_d : double precision floating point value
+
+ Macros for feature detection (boolean):
+ SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
+ SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
+ SLJIT_LITTLE_ENDIAN : little endian architecture
+ SLJIT_BIG_ENDIAN : big endian architecture
+ SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
+ SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
+
+ Constants:
+ SLJIT_NUMBER_OF_REGISTERS : number of available registers
+ SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers
+ SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers
+ SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers
+ SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers
+ SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers
+ SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
+ SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing
+ a double precision floating point array by index
+ SLJIT_SINGLE_SHIFT : the shift required to apply when accessing
+ a single precision floating point array by index
+ SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET)
+ SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
+
+ Other macros:
+ SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT
+ SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
*/
+/*****************/
+/* Sanity check. */
+/*****************/
+
#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
#error "An architecture must be selected"
#endif
-/* Sanity check. */
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
#error "Multiple architectures are selected"
#endif
-/* Auto select option (requires compiler support) */
+/********************************************************/
+/* Automatic CPU detection (requires compiler support). */
+/********************************************************/
+
#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
#ifndef _WIN32
#elif defined(__mips64)
#define SLJIT_CONFIG_MIPS_64 1
#elif defined(__sparc__) || defined(__sparc)
-#define SLJIT_CONFIG_SPARC_32 1
+# if defined(__arch64__)
+# define SLJIT_CONFIG_UNSUPPORTED 1
+# else
+# define SLJIT_CONFIG_SPARC_32 1
+# endif
#elif defined(__tilegx__)
#define SLJIT_CONFIG_TILEGX 1
#else
#undef SLJIT_EXECUTABLE_ALLOCATOR
#endif
+/******************************/
+/* CPU family type detection. */
+/******************************/
+
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
+ || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+#define SLJIT_CONFIG_ARM_32 1
+#endif
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+#define SLJIT_CONFIG_X86 1
+#elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+#define SLJIT_CONFIG_ARM 1
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#define SLJIT_CONFIG_PPC 1
+#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64)
+#define SLJIT_CONFIG_MIPS 1
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64)
+#define SLJIT_CONFIG_SPARC 1
+#endif
+
+/**********************************/
+/* External function definitions. */
+/**********************************/
+
#if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED)
/* These libraries are needed for the macros below. */
#include <stdlib.h>
#include <string.h>
-#endif /* STD_MACROS_DEFINED */
+#endif /* SLJIT_STD_MACROS_DEFINED */
/* General macros:
Note: SLJIT is designed to be independent from them as possible.
- In release mode (SLJIT_DEBUG is not defined) only the following macros are needed:
+ In release mode (SLJIT_DEBUG is not defined) only the following
+ external functions are needed:
*/
#ifndef SLJIT_MALLOC
-#define SLJIT_MALLOC(size) malloc(size)
+#define SLJIT_MALLOC(size, allocator_data) malloc(size)
#endif
#ifndef SLJIT_FREE
-#define SLJIT_FREE(ptr) free(ptr)
+#define SLJIT_FREE(ptr, allocator_data) free(ptr)
#endif
#ifndef SLJIT_MEMMOVE
#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
#endif
+/***************************/
+/* Compiler helper macros. */
+/***************************/
+
#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
#if defined(__GNUC__) && (__GNUC__ >= 3)
#endif
#endif /* !SLJIT_INLINE */
+#ifndef SLJIT_NOINLINE
+/* Not inline functions. */
+#if defined(__GNUC__)
+#define SLJIT_NOINLINE __attribute__ ((noinline))
+#else
+#define SLJIT_NOINLINE
+#endif
+#endif /* !SLJIT_INLINE */
+
#ifndef SLJIT_CONST
/* Const variables. */
#define SLJIT_CONST const
#define SLJIT_UNUSED_ARG(arg) (void)arg
#endif
+/*********************************/
+/* Type of public API functions. */
+/*********************************/
+
#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
/* Static ABI functions. For all-in-one programs. */
#define SLJIT_API_FUNC_ATTRIBUTE
#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
+/****************************/
+/* Instruction cache flush. */
+/****************************/
+
#ifndef SLJIT_CACHE_FLUSH
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+#if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86)
/* Not required to implement on archs with unified caches. */
#define SLJIT_CACHE_FLUSH(from, to)
#define SLJIT_CACHE_FLUSH(from, to) \
cacheflush((long)(from), (long)(to), 0)
-#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
#define SLJIT_CACHE_FLUSH(from, to) \
#endif /* !SLJIT_CACHE_FLUSH */
+/******************************************************/
+/* Byte/half/int/word/single/double type definitions. */
+/******************************************************/
+
/* 8 bit byte type. */
typedef unsigned char sljit_ub;
typedef signed char sljit_sb;
typedef unsigned int sljit_ui;
typedef signed int sljit_si;
-/* Machine word type. Can encapsulate a pointer.
+/* Machine word type. Enough for storing a pointer.
32 bit for 32 bit machines.
64 bit for 64 bit machines. */
#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
/* Shift for double precision sized data. */
#define SLJIT_DOUBLE_SHIFT 3
+#define SLJIT_SINGLE_SHIFT 2
#ifndef SLJIT_W
#endif /* !SLJIT_W */
-#ifndef SLJIT_CALL
-
-/* ABI (Application Binary Interface) types. */
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-
-#if defined(__GNUC__) && !defined(__APPLE__)
-
-#define SLJIT_CALL __attribute__ ((fastcall))
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(_MSC_VER)
-
-#define SLJIT_CALL __fastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#elif defined(__BORLANDC__)
-
-#define SLJIT_CALL __msfastcall
-#define SLJIT_X86_32_FASTCALL 1
-
-#else /* Unknown compiler. */
-
-/* The cdecl attribute is the default. */
-#define SLJIT_CALL
-
-#endif
-
-#else /* Non x86-32 architectures. */
-
-#define SLJIT_CALL
-
-#endif /* SLJIT_CONFIG_X86_32 */
-
-#endif /* !SLJIT_CALL */
+/*************************/
+/* Endianness detection. */
+/*************************/
#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
-/* These macros are useful for the applications. */
+/* These macros are mostly useful for the applications. */
#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
#error "Exactly one endianness must be selected"
#endif
+#ifndef SLJIT_UNALIGNED
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
+ || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+ || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
+ || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+ || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
+ || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
+ || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#define SLJIT_UNALIGNED 1
+#endif
+
+#endif /* !SLJIT_UNALIGNED */
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+/* Auto detect SSE2 support using CPUID.
+ On 64 bit x86 cpus, sse2 must be present. */
+#define SLJIT_DETECT_SSE2 1
+#endif
+
+/*****************************************************************************************/
+/* Calling convention of functions generated by SLJIT or called from the generated code. */
+/*****************************************************************************************/
+
+#ifndef SLJIT_CALL
+
+#if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION)
+
+/* Force cdecl. */
+#define SLJIT_CALL
+
+#elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#if defined(__GNUC__) && !defined(__APPLE__)
+
+#define SLJIT_CALL __attribute__ ((fastcall))
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(_MSC_VER)
+
+#define SLJIT_CALL __fastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(__BORLANDC__)
+
+#define SLJIT_CALL __msfastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#else /* Unknown compiler. */
+
+/* The cdecl attribute is the default. */
+#define SLJIT_CALL
+
+#endif
+
+#else /* Non x86-32 architectures. */
+
+#define SLJIT_CALL
+
+#endif /* SLJIT_CONFIG_X86_32 */
+
+#endif /* !SLJIT_CALL */
+
#ifndef SLJIT_INDIRECT_CALL
#if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \
|| ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX)
#endif
#endif /* SLJIT_INDIRECT_CALL */
+/* The offset which needs to be substracted from the return address to
+determine the next executed instruction after return. */
#ifndef SLJIT_RETURN_ADDRESS_OFFSET
#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
#define SLJIT_RETURN_ADDRESS_OFFSET 8
#endif
#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
-#ifndef SLJIT_SSE2
+/***************************************************/
+/* Functions of the built-in executable allocator. */
+/***************************************************/
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
-/* Turn on SSE2 support on x86. */
-#define SLJIT_SSE2 1
+#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void);
+#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size)
+#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
+#endif
+
+/**********************************************/
+/* Registers and locals offset determination. */
+/**********************************************/
#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
-/* Auto detect SSE2 support using CPUID.
- On 64 bit x86 cpus, sse2 must be present. */
-#define SLJIT_DETECT_SSE2 1
+
+#define SLJIT_NUMBER_OF_REGISTERS 10
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#if (defined SLJIT_X86_32_FASTCALL && SLJIT_X86_32_FASTCALL)
+#define SLJIT_LOCALS_OFFSET_BASE ((2 + 4) * sizeof(sljit_sw))
+#else
+/* Maximum 3 arguments are passed on the stack, +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1 + 4) * sizeof(sljit_sw))
+#endif /* SLJIT_X86_32_FASTCALL */
+
+#elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+
+#ifndef _WIN64
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 6
+#define SLJIT_LOCALS_OFFSET_BASE (sizeof(sljit_sw))
+#else
+#define SLJIT_NUMBER_OF_REGISTERS 12
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_LOCALS_OFFSET_BASE ((4 + 2) * sizeof(sljit_sw))
+#endif /* _WIN64 */
+
+#elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
+
+#define SLJIT_NUMBER_OF_REGISTERS 11
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+
+#define SLJIT_NUMBER_OF_REGISTERS 11
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 7
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64)
+
+#define SLJIT_NUMBER_OF_REGISTERS 25
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 10
+#define SLJIT_LOCALS_OFFSET_BASE (2 * sizeof(sljit_sw))
+
+#elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC)
+
+#define SLJIT_NUMBER_OF_REGISTERS 22
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 17
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX)
+#define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw))
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw))
+#endif /* SLJIT_CONFIG_PPC_64 || _AIX */
+
+#elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS)
+
+#define SLJIT_NUMBER_OF_REGISTERS 17
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 8
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+#define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw))
+#else
+#define SLJIT_LOCALS_OFFSET_BASE 0
#endif
-#endif /* (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) */
+#elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC)
-#endif /* !SLJIT_SSE2 */
+#define SLJIT_NUMBER_OF_REGISTERS 18
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 14
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+/* Add +1 for double alignment. */
+#define SLJIT_LOCALS_OFFSET_BASE ((23 + 1) * sizeof(sljit_sw))
+#endif
-#ifndef SLJIT_UNALIGNED
+#elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX)
+
+#define SLJIT_NUMBER_OF_REGISTERS 10
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 5
+#define SLJIT_LOCALS_OFFSET_BASE 0
+
+#elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+
+#define SLJIT_NUMBER_OF_REGISTERS 0
+#define SLJIT_NUMBER_OF_SAVED_REGISTERS 0
+#define SLJIT_LOCALS_OFFSET_BASE 0
-#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
- || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
- || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
- || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
- || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \
- || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
- || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
-#define SLJIT_UNALIGNED 1
#endif
-#endif /* !SLJIT_UNALIGNED */
+#define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE)
-#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
-SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
-SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void);
-#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size)
-#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
+#define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \
+ (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS)
+
+#define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6
+#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64)
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1
+#else
+#define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0
#endif
+#define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \
+ (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS)
+
+/*************************************/
+/* Debug and verbose related macros. */
+/*************************************/
+
#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
#include <stdio.h>
#endif
~ian / pcre3.git / blobdiff