+++ /dev/null
-# The directory that overview will be stored in (the DB_HOME directory)
-# is set in inn.conf with the 'pathoverview' option. Other parameters
-# for tuning ovdb are in this file.
-
-# Size of the memory pool cache, in Kilobytes. The cache will have a
-# backing store file in the DB directory which will be at least as big.
-# In general, the bigger the cache, the better. Use C<ovdb_stat -m> to see
-# cache hit percentages. If they're less than 80%, try increasing the
-# cache size. To make a change of this parameter take effect, shut down
-# and restart INN (be sure to kill all of the nnrpds when shutting down).
-# Default is 8000, which is adequate for small to medium sized servers.
-# Large servers will probably need at least 14000.
-#cachesize 8000
-
-# Overview data is split between this many files. Currently,
-# innd will keep all of the files open, so don't set this too high
-# or innd may run out of file descriptors. The nnrpds only open one
-# at a time, regardless. May be set to one, or just a few, but only
-# do that if your OS supports large (>2G) files. Changing this
-# parameter has no effect on an already-established database.
-#numdbfiles 32
-
-# If txn_nosync is set to false, BerkeleyDB flushes the log after every
-# transaction. This minimizes the number of transactions that may be
-# lost in the event of a crash, but results in significantly degraded
-# performance. Default is true.
-#txn_nosync true
-
-# If useshm is set to true, BerkeleyDB will use shared memory instead
-# of mmap for its environment regions (cache, lock, etc). With some
-# platforms, this may improve performance. Default is false.
-# This parameter is ignored if you have BerkeleyDB 2.x
-#useshm false
-
-# Sets the shared memory key used by BerkeleyDB when 'useshm' is true.
-# BerkeleyDB will create several (usually 5) shared memory segments,
-# using sequentially numbered keys starting with 'shmkey'.
-# Choose a key that does not conflict with any existing shared memory
-# segments on your system. Default is 6400. This parameter is only
-# used with BerkeleyDB 3.1 or newer.
-#shmkey 6400
-
-# Sets the page size for the DB files (in bytes). Must be a power of 2.
-# Best choices are 4096 or 8192. The default is 8192.
-# Changing this parameter has no effect on an already-established database.
-#pagesize 8192
-
-# Sets the minimum number of keys per page. See the BerkeleyDB
-# documentation for more info. Default is based on page size:
-#
-# default_minkey = MAX(2, pagesize / 2048 - 1)
-#
-# The lowest allowed minkey is 2. Setting minkey higher than the
-# default is not recommended, as it will cause the databases to have
-# a lot of overflow pages.
-# Changing this parameter has no effect on an already-established database.
-#minkey 3
-
-# Sets the BerkeleyDB "lk_max" parameter, which is the maxmium number
-# of locks that can exist in the database at the same time. Default
-# is 4000.
-#maxlocks 4000
-
-# The nocompact parameter affects expireover's behavior. The expireover
-# function in ovdb can do its job in one of two ways: By simply deleting
-# expired records from the database; or by re-writing the overview records
-# into a different location leaving out the expired records. The first
-# method is faster, but it leaves 'holes' that result in space that can
-# not immediately be reused. The second method 'compacts' the records
-# by rewriting them.
-#
-# If this parameter is set to 0, expireover will compact all newsgroups;
-# if set to 1, expireover will not compact any newsgroups; and if set to
-# a value greater than one, expireover will only compact groups that
-# have less than that number of articles. Default is 1000.
-#
-# Experience has shown that compacting has minimal effect (other than
-# making expireover take longer) so the default is now 1. This parameter
-# will probably be removed in the future.
-#nocompact 1
-
-# Normally, each nnrpd process directly accesses the BerkeleyDB environment.
-# The process of attaching to the database (and detaching when finished) is
-# fairly expensive, and can result in high loads in situations when there are
-# lots of reader connections of relatively short duration.
-#
-# When the readserver parameter is "true", the nnrpds will access overview
-# via a helper server (ovdb_server -- which is started by ovdb_init).
-# Default is false.
-#readserver false
-
-# This parameter is only used when 'readserver' is true. It sets the number
-# of ovdb_server processes. As each ovdb_server can process only one
-# transaction at a time, running more servers can improve reader response
-# times. Default is 5.
-#numrsprocs 5
-
-# This parameter is only used when 'readserver' is true. It sets a maximum
-# number of readers that a given ovdb_server process will serve at one time.
-# This means the maximum number of readers for all of the ovdb_server
-# processes is (numrsprocs * maxrsconn). Default is 0, which means an
-# umlimited number of connections is allowed.
-#maxrsconn 0
-
~ian / innduct.git / blobdiff