+++ /dev/null
-/* $Id: nntp.h 6070 2002-12-26 07:10:10Z rra $
-**
-** Here be a set of NNTP response codes as defined in RFC977 and elsewhere.
-** The reponse codes are three digits, RFI, defined like this:
-** R, Response:
-** 1xx Informative message
-** 2xx Command ok
-** 3xx Command ok so far, send the rest of it.
-** 4xx Command was correct, but couldn't be performed for
-** some reason.
-** 5xx Command unimplemented, or incorrect, or a serious
-** program error occurred.
-** F, Function:
-** x0x Connection, setup, and miscellaneous messages
-** x1x Newsgroup selection
-** x2x Article selection
-** x3x Distribution functions
-** x4x Posting
-** x8x Nonstandard extensions (AUTHINFO, XGTITLE)
-** x9x Debugging output
-** I, Information:
-** No defined semantics
-*/
-#define NNTP_HELPOK_VAL 100
-#define NNTP_BAD_COMMAND_VAL 500
-#define NNTP_BAD_COMMAND "500 Syntax error or bad command"
-#define NNTP_TEMPERR_VAL 503
-#define NNTP_ACCESS "502 Permission denied"
-#define NNTP_ACCESS_VAL 502
-#define NNTP_GOODBYE_ACK "205 ."
-#define NNTP_GOODBYE_ACK_VAL 205
-#define NNTP_GOODBYE "400"
-#define NNTP_GOODBYE_VAL 400
-#define NNTP_HAVEIT "435 Duplicate"
-#define NNTP_HAVEIT_BADID "435 Bad Message-ID"
-#define NNTP_HAVEIT_VAL 435
-#define NNTP_LIST_FOLLOWS "215"
-#define NNTP_LIST_FOLLOWS_VAL 215
-#define NNTP_HELP_FOLLOWS "100 Legal commands"
-#define NNTP_HELP_FOLLOWS_VAL 100
-#define NNTP_NOTHING_FOLLOWS_VAL 223
-#define NNTP_ARTICLE_FOLLOWS "220"
-#define NNTP_ARTICLE_FOLLOWS_VAL 220
-#define NNTP_NEWGROUPS_FOLLOWS_VAL 231
-#define NNTP_HEAD_FOLLOWS "221"
-#define NNTP_HEAD_FOLLOWS_VAL 221
-#define NNTP_BODY_FOLLOWS_VAL 222
-#define NNTP_OVERVIEW_FOLLOWS_VAL 224
-#define NNTP_DATE_FOLLOWS_VAL 111
-#define NNTP_POSTOK "200"
-#define NNTP_POSTOK_VAL 200
-#define NNTP_START_POST_VAL 340
-#define NNTP_NOPOSTOK_VAL 201
-#define NNTP_SLAVEOK_VAL 202
-#define NNTP_REJECTIT_VAL 437
-#define NNTP_REJECTIT_EMPTY "437 Empty article"
-#define NNTP_DONTHAVEIT "430"
-#define NNTP_DONTHAVEIT_VAL 430
-#define NNTP_RESENDIT_LATER "436 Retry later"
-#define NNTP_RESENDIT_VAL 436
-#define NNTP_POSTEDOK "240 Article posted"
-#define NNTP_POSTEDOK_VAL 240
-#define NNTP_POSTFAIL_VAL 441
-#define NNTP_GROUPOK_VAL 211
-#define NNTP_SENDIT "335"
-#define NNTP_SENDIT_VAL 335
-#define NNTP_SYNTAX_USE "501 Bad command use"
-#define NNTP_SYNTAX_VAL 501
-#define NNTP_BAD_SUBCMD "501 Bad subcommand"
-#define NNTP_TOOKIT "235"
-#define NNTP_TOOKIT_VAL 235
-#define NNTP_NOTINGROUP "412 Not in a newsgroup"
-#define NNTP_NOTINGROUP_VAL 412
-#define NNTP_NOSUCHGROUP "411 No such group"
-#define NNTP_NOSUCHGROUP_VAL 411
-#define NNTP_NEWNEWSOK "230 New news follows"
-#define NNTP_NOARTINGRP "423 Bad article number"
-#define NNTP_NOARTINGRP_VAL 423
-#define NNTP_NOCURRART "420 No current article"
-#define NNTP_NOCURRART_VAL 420
-#define NNTP_NONEXT_VAL 421
-#define NNTP_NOPREV_VAL 422
-#define NNTP_CANTPOST "440 Posting not allowed"
-#define NNTP_CANTPOST_VAL 440
-
-/* new entries for the "streaming" protocol */
-/* response to "mode stream" else 500 if stream not supported */
-#define NNTP_OK_STREAM_VAL 203 /* Streaming supported */
-
-/* response to "check <id>". Must include ID of article.
-** Example: "431 <1234@host.domain>"
-*/
-#define NNTP_OK_SENDID_VAL 238 /* I want article <id> */
-#define NNTP_RESENDID_VAL 431 /* try <id> again later */
-#define NNTP_ERR_GOTID_VAL 438 /* Got <id>, don't send */
-
-/* responses to "takethis <id>. Must include ID of article */
-#define NNTP_OK_RECID_VAL 239 /* Article <id> received OK */
-#define NNTP_ERR_FAILID_VAL 439 /* Transfer of <id> failed */
-
-/* End of new entries for the "streaming" protocol */
-
-/*
-** The first character of an NNTP reply can be used as a category class.
-*/
-#define NNTP_CLASS_OK '2'
-#define NNTP_CLASS_ERROR '4'
-#define NNTP_CLASS_FATAL '5'
-
-
-/*
-** Authentication commands from the RFC update (not official).
-*/
-#define NNTP_AUTH_NEEDED "480"
-#define NNTP_AUTH_NEEDED_VAL 480
-#define NNTP_AUTH_BAD "481"
-#define NNTP_AUTH_NEXT "381"
-#define NNTP_AUTH_NEXT_VAL 381
-#define NNTP_AUTH_OK "281"
-#define NNTP_AUTH_OK_VAL 281
-#define NNTP_AUTH_REJECT_VAL 482
-
-/*
-** Starttls commands (not official).
-*/
-#define NNTP_STARTTLS_NEXT "382"
-#define NNTP_STARTTLS_NEXT_VAL 382
-#define NNTP_STARTTLS_DONE "483"
-#define NNTP_STARTTLS_DONE_VAL 483
-#define NNTP_STARTTLS_BAD "580"
-#define NNTP_STARTTLS_BAD_VAL 580
-
-/*
-** XGTITLE, from ANU news.
-*/
-#define NNTP_XGTITLE_BAD 481 /* Yes, 481. */
-#define NNTP_XGTITLE_OK 282
-
-/*
-** MODE CANCEL extension.
-*/
-#define NNTP_OK_CANCEL_VAL 284
-#define NNTP_OK_CANCELLED "289"
-#define NNTP_ERR_CANCEL_VAL 484
-
-/*
-** XBATCH feed extension.
-*/
-#define NNTP_OK_XBATCHED_VAL 239 /* Batch transferred successfully */
-#define NNTP_OK_XBATCHED "239"
-#define NNTP_CONT_XBATCH_VAL 339 /* Continue to send batch */
-#define NNTP_CONT_XBATCH "339"
-/* and one more meaning for the 436 code NNTP_RESENDIT_VAL */
-#define NNTP_RESENDIT_XBATCHERR "436 xbatch failed: "
-/* and one more meaning for the 501 code NNTP_SYNTAX_USE */
-#define NNTP_XBATCH_BADSIZE "501 Invalid or missing size for xbatch"
-
-#define NNTP_STRLEN 512
-
-/* Consensus on the USEFOR mailing list in June of 2000 indicates that the
- next revision of the Usenet article standard will limit the length of the
- message ID to 250 characters. This is also the limit recommended by
- son-of-1036.
-
- You can increase this limit if you want, but don't increase it above 497.
- RFC 977 limits each line of the NNTP protocol to 512 octets, including
- the terminating CRLF. For a message ID to be passed using the TAKETHIS
- command, it can therefore be a maximum of 501 octets. The November 1999
- draft of the replacement RFC limits it to 497 octets.
-
- Both Cyclone and DNews are known to reject message IDs longer than 500
- octets as of June of 2000. DNews has been reported to have problems with
- message IDs of 494 octets. */
-
-#define NNTP_MSGID_MAXLEN 250
~ian / inn-innduct.git / blobdiff