# account, and new local accounts will get the remote accounts'
# ids.
#
+# usergroups
+# nousergroups
+# Specifies whether local accounts are supposed to have
+# corresponding groups. If this is set then when a new account
+# is created, the corresponding per-user group will be created as
+# well, and per-user groups are created for existing accounts if
+# necessary (if account creation is enabled). If the gid or
+# group name for a per-user group is already taken for a
+# different group name or gid this will be logged, and processing
+# of that account will be inhibited, but it is not a fatal
+# error. The default is `usergroups'.
+#
# createuser
# createuser <commandname>
# nocreateuser
# the PATH if necessary. Either sameuid, or both uidmin and
# uidmax, must be specified, if accounts are to be created.
#
-# groups [!]<glob-pattern> ...
+# group <glob-pattern>
+# nogroup <glob-pattern>
# Specifies that the membership of the local groups specified
-# should be adjusted whenever account data for a particular user
-# is copied, so that the account will be a member of the affected
-# group locally iff it is a member of the same group on the
-# remote host. The specification is read from left to right,
-# until a match on a glob pattern is found. Then, the membership
-# is adjusted iff the glob pattern was not preceded by `!'.
-# THIS FEATURE IS NOT YET IMPLEMENTED.
+# should be adjusted or not adjusted whenever account data for a
+# particular user is copied, so that the account will be a member
+# of the affected group locally iff it is a member of the same
+# group on the remote host. The most recently-encountered
+# glob-pattern for a particular group takes effect. The default
+# is `nogroups *'.
#
# Some config file directives are per-host, and should appear before
# any directives which actually modify accounts:
# shadow(5) on Linux. getshadow should not be specified without
# getpasswd.
#
-# Some configuration file directives specify that account or group
-# data is to transferred from the current host. They should appear as
-# the last thing(s) in a host section:
+# Some configuration file directives specify that account data is to
+# transferred from the current host. They should appear as the last
+# thing(s) in a host section:
#
# user <username> [remote=<remoteusername>]
# Specifies that account data should be copied for local user
# users <ruidmin>-<ruidmax>
# Specifies that all remote users whose uid is in the given range
# are to be copied to corresponding local user accounts.
+#
+# nouser <username>
+# Specifies that data for <username> is _not_ to be copied, even
+# if subsequent user or users directives suggest that it should
+# be.
+#
+# (A note is made when a `user', `users' or `nouser' directive is
+# encountered for a particular account, and no subsequent directives
+# for that account will take effect.)
+#
+# addhere
+# This directive has no effect on `sync-accounts'. However, it
+# is used as a placeholder by `grab-account': new accounts for
+# creation are inserted just before `addhere'.
+#
+# Finally, the config file must finish with:
+#
+# end
use POSIX;
$configfile= '/etc/sync-accounts';
$def_createuser= 'sync-accounts-createuser';
$ch_homebase= '/home';
+$opt_usergroups= 1;
+@groupglobs= [ '.*', 0 ];
+regroupglobs();
END {
for $x (@unlocks) {
}
}
+for $h (@ARGV) { $wanthost{$h}= 1; }
+
open CF,"< $configfile" or die "$configfile: $!";
sub fetchfile (\%$) {
print "$diagstr: $_[0]\n" or die $!;
}
+sub regroupglobs () {
+ $nogroups= (@groupglobs == 1 &&
+ $groupglobs[0]->[0] eq '.*' &&
+ !$groupglobs[0]->[1]);
+ $ggfunc= "sub wantsyncgroup {\n \$_= \$_[0];\n return\n";
+ for $e (@groupglobs) { $ggfunc.= " m/^$e->[0]\$/ ? $e->[1] :\n"; }
+ $ggfunc.= " die;\n};\n1;\n";
+#print STDERR "$ggfunc\n";
+ eval $ggfunc or die "$ggfunc // $@";
+}
+
sub fetchown () {
if (!$own_fetchedpasswd) {
fetchownfile(@ownpasswd,'/etc/passwd',$ch_lockpasswd);
}
}
+sub fetchgroup () {
+ return if $ch_fetchedgroup;
+ die "$configfile:$.: getgroup not specified for host $ch_name\n"
+ unless length $ch_getgroup;
+ fetchfile(%remgroup,"$ch_getgroup |");
+}
+
+sub syncusergroup ($$) {
+ my ($lu,$luid) = @_;
+
+ return 1 if !$opt_usergroups;
+#print STDERR "syncusergroup($lu,$luid)\n";
+ $ugfound=0;
+
+ for $e (@owngroup) {
+ $samename= $e->[0] eq $lu;
+ $sameid= $e->[2] eq $luid;
+ next unless $samename || $sameid;
+ if (!$samename || !$sameid) {
+ diag("local group $e->[0] ($e->[2]) mismatch vs. local user $lu ($luid)");
+ return 0;
+ }
+ if ($ugfound) {
+ diag("per-user group $lu ($luid) duplicated");
+ return 0;
+ }
+ $ugfound=1;
+ }
+
+ return 1 if $ugfound;
+
+ if (!length $opt_createuser) {
+ diag("account creation not enabled, not creating per-user group");
+ return 0;
+ }
+ push @owngroup, [ $lu,'x',$luid,'' ];
+ $modifiedgroup= 1;
+ return 1;
+}
+
sub syncuser ($$) {
my ($lu,$ru) = @_;
+#print STDERR "syncuser($lu,$ru)\n";
next unless $ch_doinghost;
+ return if $doneuser{$lu}++;
+ return if !length $ru;
$diagstr= "user $lu from $ch_name!$ru";
fetchown();
-#print STDERR "syncuser($lu,$ru)\n";
+#print STDERR "syncuser($lu,$ru) doing\n";
fetchpasswd();
if (!$rempasswd{$ru}) { diag("no remote entry"); return; }
diag("remote account disabled in shadow");
return;
}
-
+
if (!grep($_->[0] eq $lu, @ownpasswd)) {
if (!length $opt_createuser) { diag("account creation not enabled"); return; }
if ($no_act) { diag("-n specified; not creating account"); return; }
die "$opt_createuser: bad output: $_\n" if @newpwent!=7 or $newpwent[0] ne $lu;
checkuid($newpwent[2],$lu) or return;
if ($own_haveshadow) {
- push(@ownshadow,[ $lu, $newpwent[1], $cdays, 0,99999,7,'','' ]);
+ push(@ownshadow,[ $lu, $newpwent[1], $cdays, 0,99999,7,'','','' ]);
$newpwent[1]= 'x';
$modifiedshadow= 1;
}
+ syncusergroup($lu,$newpwent[2]) or return;
push @ownpasswd,[ @newpwent ];
$modifiedpasswd= 1;
}
+
+ for $e (@ownpasswd) {
+ next unless $e->[0] eq $lu;
+ syncusergroup($lu,$e->[2]) or return;
+ }
+
+ $ruid= $rempasswd{$ru}->[2];
+ $rgid= $rempasswd{$ru}->[3];
+ if ($opt_sameuid && checkuid($ruid,$lu)) {
+ for $e (@ownpasswd) {
+ next unless $e->[0] eq $lu;
+ $luid= $e->[2]; $lgid= $e->[3];
+ die "$diagstr: local uid $luid, remote uid $ruid\n" if $luid ne $ruid;
+ die "$diagstr: local gid $lgid, remote gid $rgid\n" if $lgid ne $rgid;
+ }
+ }
+
#print STDERR "syncuser($lu,$ru) exists $own_haveshadow\n";
if ($own_haveshadow && grep($_->[0] eq $lu, @ownshadow)) {
#print STDERR "syncuser($lu,$ru) shadow $rempasswd{$ru}->[1]\n";
}
copyfield('passwd',$lu,4, $rempasswd{$ru}->[4]); # comment
copyfield('passwd',$lu,6, $rempasswd{$ru}->[6]); # shell
- if ($opt_sameuid && checkuid($rempasswd{$ru}->[2],$lu)) {
- for $e (@ownpasswd) {
- next unless $e->[0] eq $lu;
- $lid= $e->[2]; $rid= $rempasswd{$ru}->[2];
- die "$diagstr: local uid $lid, remote uid $rid\n" if $lid ne $rid;
- $lid= $e->[3]; $rid= $rempasswd{$ru}->[3];
- die "$diagstr: local gid $lid, remote gid $rid\n" if $lid ne $rid;
+
+ if (!$nogroups) {
+ for $e (@owngroup) {
+ $tgroup= $e->[0];
+#print STDERR "syncuser($lu,$ru) group $tgroup\n";
+ next unless &wantsyncgroup($tgroup);
+#print STDERR "syncuser($lu,$ru) group $tgroup yes\n";
+ fetchgroup();
+ if (!exists $remgroup{$tgroup}) {
+ diag("group $tgroup: not on remote host");
+ next;
+ }
+ $inremote= grep($_ eq $ru, split(/\,/,$remgroup{$tgroup}->[3]));
+ $cusers= $e->[3]; $inlocal= grep($_ eq $lu, split(/\,/,$cusers));
+ if ($inremote && !$inlocal) {
+ $cusers.= ',' if length $cusers;
+ $cusers.= $lu;
+ } elsif ($inlocal && !$inremote) {
+ $cusers= join(',', grep($_ ne $lu, split(/\,/, $cusers)));
+ } else {
+ next;
+ }
+ $e->[3]= $cusers;
+ $modifiedgroup= 1;
}
}
}
}
sub finish () {
+ for $h (keys %wanthost) {
+ die "host $h not in config file\n" if $wanthost{$h};
+ }
+
+ umask 077;
for $file (qw(passwd shadow group)) {
eval "\$modified= \$modified$file; \$data_ref= \\\@own$file;".
" \$fetched= \$own_fetched$file; 1;" or die $@;
close NF or die $!;
system "diff -U0 /etc/$file $newfile"; $?==256 or die $?;
if (!$no_act) {
- chown 0,0, $newfile or die $!;
- chmod 0644, $newfile or die $!;
+ if ($file eq 'shadow') {
+ system "chown root.shadow $newfile"; $? and die $?;
+ chmod 0640, $newfile or die $!;
+ } else {
+ chown 0,0, $newfile or die $!;
+ chmod 0644, $newfile or die $!;
+ }
rename $newfile, "/etc/$file" or die $!;
}
}
$ch_name= $1;
$ch_getpasswd= $ch_getgroup= $ch_getshadow= '';
$ch_fetchedpasswd= $ch_fetchedgroup;
- $ch_doinghost= !@ARGV || grep($_ eq $ch_name, @ARGV);
+ if (!@ARGV) {
+ $ch_doinghost= 1;
+ } elsif (exists $wanthost{$ch_name}) {
+ $wanthost{$ch_name}= 0;
+ $ch_doinghost= 1;
+ } else {
+ $ch_doinghost= 0;
+ }
} elsif (m/^(getpasswd|getshadow|getgroup)\s+(.*\S)$/) {
eval "\$ch_$1= \$2; 1;" or die $@;
} elsif (m/^(lockpasswd|lockgroup)\s+(\S+)$/) {
} else {
open STDOUT,">> $1" or die "$1: $!"; $|=1;
}
- } elsif (m/^(no|)(sameuid)$/) {
+ } elsif (m/^(no|)(sameuid|usergroups)$/) {
eval "\$opt_$2= ".($1 eq 'no' ? 0 : 1)."; 1;" or die $@;
+ } elsif (m/^(no|)group\s+([-+.0-9a-zA-Z*?]+)$/) {
+ $yes= $1 eq 'no' ? 0 : 1;
+ $_= $2;
+ @groupglobs=() if $_ eq '*';
+ s/[-+._]/\\$1/g;
+ s/\*/\.\*/g;
+ s/\?/\./g;
+ unshift @groupglobs, [ $_, $yes ];
+ regroupglobs();
} elsif (m/^user\s+(\S+)$/) {
syncuser($1,$1);
- } elsif (m/^groups\s+(.*\S)$/) {
} elsif (m/^user\s+(\S+)\s+remote\=(\S+)$/) {
syncuser($1,$2);
+ } elsif (m/^nouser\s+(\S+)$/) {
+ syncuser($1,'');
} elsif (m/^users\s+(\d+)\-(\d+)$/) {
- $tmin= $1; $tmax= $2;
+ $tmin= $1; $tmax= $2; $except= $3;
fetchpasswd();
for $k (keys %rempasswd) {
$tuid= $rempasswd{$k}->[2];
next if $tuid<$1 or $tuid>$2;
syncuser($k,$k);
}
+ } elsif (m/^addhere$/) {
} else {
die "$configfile:$.: unknown directive\n";
}