From lists@flypig.co.uk Fri Jan 2 14:16:54 2004 From: lists@flypig.co.uk (David Llewellyn-Jones) Date: Fri, 02 Jan 2004 14:16:54 GMT Subject: Add to Path problem: (was Re: 32-bit LaTeX) In-Reply-To: <3f64e70c4d.Richard@risctex.blueyonder.co.uk> References: <3abd5b0a4d.llewelld@flypig.e7even.com> <4d0ad44f7fsbellon@sbellon.de> <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Message-ID: In message <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Richard Smith wrote: > In message > John-Mark Bell wrote: > > > In message <4d0ad44f7fsbellon@sbellon.de> > > Stefan Bellon wrote: > > > > > After copying !TexFonts.Utilities.AddToPath to the Run$Path, > > > John-Mark's problem 1) is solved. > > > > > > > Aha! Thanks for that, I hadn't noticed that being there ;) Still, it may > > well be sensible to do something akin to what !gcc does: > > > > If "" = "" Then Set Run$Path ,TeXBin: > > Set TeXBin$Path texmf:armtex.bin. > > > > As it saves the user having to put AddToPath somewhere sane ;) > > Well, I've tried messing about with both of these solutions and so far > haven't managed to solve the AddToPath error, no doubt because of my own > lack of skill. I would be grateful for a little more details as to exactly > what to do to get this new distribution to work. It's difficult to know exactly what the problem is for you, but if you've tried the two suggestions above and they don't work, I suggest you try downloading Olly Betts's AddToPath utility that you can get from here: Copy it inside "$.!Boot.Library" and try re-booting both !TeX and !TeXFonts (that is, re-run their !Boot files). Hopefully this will do the trick. I've been meaning to make suitable changes to the original archives but haven't yet got around to it. David -- Website: http://www.flypig.co.uk From lists at flypig.co.uk Fri Jan 2 14:16:54 2004 From: lists at flypig.co.uk (David Llewellyn-Jones) Date: Fri, 02 Jan 2004 14:16:54 GMT Subject: Add to Path problem: (was Re: 32-bit LaTeX) In-Reply-To: <3f64e70c4d.Richard@risctex.blueyonder.co.uk> References: <3abd5b0a4d.llewelld@flypig.e7even.com> <4d0ad44f7fsbellon@sbellon.de> <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Message-ID: In message <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Richard Smith wrote: > In message > John-Mark Bell wrote: > > > In message <4d0ad44f7fsbellon@sbellon.de> > > Stefan Bellon wrote: > > > > > After copying !TexFonts.Utilities.AddToPath to the Run$Path, > > > John-Mark's problem 1) is solved. > > > > > > > Aha! Thanks for that, I hadn't noticed that being there ;) Still, it may > > well be sensible to do something akin to what !gcc does: > > > > If "" = "" Then Set Run$Path ,TeXBin: > > Set TeXBin$Path texmf:armtex.bin. > > > > As it saves the user having to put AddToPath somewhere sane ;) > > Well, I've tried messing about with both of these solutions and so far > haven't managed to solve the AddToPath error, no doubt because of my own > lack of skill. I would be grateful for a little more details as to exactly > what to do to get this new distribution to work. It's difficult to know exactly what the problem is for you, but if you've tried the two suggestions above and they don't work, I suggest you try downloading Olly Betts's AddToPath utility that you can get from here: Copy it inside "$.!Boot.Library" and try re-booting both !TeX and !TeXFonts (that is, re-run their !Boot files). Hopefully this will do the trick. I've been meaning to make suitable changes to the original archives but haven't yet got around to it. David -- Website: http://www.flypig.co.uk From lists at flypig.co.uk Fri Jan 2 14:16:54 2004 From: lists at flypig.co.uk (David Llewellyn-Jones) Date: Fri, 02 Jan 2004 14:16:54 GMT Subject: Add to Path problem: (was Re: 32-bit LaTeX) In-Reply-To: <3f64e70c4d.Richard@risctex.blueyonder.co.uk> References: <3abd5b0a4d.llewelld@flypig.e7even.com> <4d0ad44f7fsbellon@sbellon.de> <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Message-ID: In message <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Richard Smith wrote: > In message > John-Mark Bell wrote: > > > In message <4d0ad44f7fsbellon@sbellon.de> > > Stefan Bellon wrote: > > > > > After copying !TexFonts.Utilities.AddToPath to the Run$Path, > > > John-Mark's problem 1) is solved. > > > > > > > Aha! Thanks for that, I hadn't noticed that being there ;) Still, it may > > well be sensible to do something akin to what !gcc does: > > > > If "" = "" Then Set Run$Path ,TeXBin: > > Set TeXBin$Path texmf:armtex.bin. > > > > As it saves the user having to put AddToPath somewhere sane ;) > > Well, I've tried messing about with both of these solutions and so far > haven't managed to solve the AddToPath error, no doubt because of my own > lack of skill. I would be grateful for a little more details as to exactly > what to do to get this new distribution to work. It's difficult to know exactly what the problem is for you, but if you've tried the two suggestions above and they don't work, I suggest you try downloading Olly Betts's AddToPath utility that you can get from here: Copy it inside "$.!Boot.Library" and try re-booting both !TeX and !TeXFonts (that is, re-run their !Boot files). Hopefully this will do the trick. I've been meaning to make suitable changes to the original archives but haven't yet got around to it. David -- Website: http://www.flypig.co.uk From lists at flypig.co.uk Fri Jan 2 14:16:54 2004 From: lists at flypig.co.uk (David Llewellyn-Jones) Date: Fri, 02 Jan 2004 14:16:54 GMT Subject: Add to Path problem: (was Re: 32-bit LaTeX) In-Reply-To: <3f64e70c4d.Richard@risctex.blueyonder.co.uk> References: <3abd5b0a4d.llewelld@flypig.e7even.com> <4d0ad44f7fsbellon@sbellon.de> <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Message-ID: In message <3f64e70c4d.Richard@risctex.blueyonder.co.uk> Richard Smith wrote: > In message > John-Mark Bell wrote: > > > In message <4d0ad44f7fsbellon@sbellon.de> > > Stefan Bellon wrote: > > > > > After copying !TexFonts.Utilities.AddToPath to the Run$Path, > > > John-Mark's problem 1) is solved. > > > > > > > Aha! Thanks for that, I hadn't noticed that being there ;) Still, it may > > well be sensible to do something akin to what !gcc does: > > > > If "" = "" Then Set Run$Path ,TeXBin: > > Set TeXBin$Path texmf:armtex.bin. > > > > As it saves the user having to put AddToPath somewhere sane ;) > > Well, I've tried messing about with both of these solutions and so far > haven't managed to solve the AddToPath error, no doubt because of my own > lack of skill. I would be grateful for a little more details as to exactly > what to do to get this new distribution to work. It's difficult to know exactly what the problem is for you, but if you've tried the two suggestions above and they don't work, I suggest you try downloading Olly Betts's AddToPath utility that you can get from here: Copy it inside "$.!Boot.Library" and try re-booting both !TeX and !TeXFonts (that is, re-run their !Boot files). Hopefully this will do the trick. I've been meaning to make suitable changes to the original archives but haven't yet got around to it. David -- Website: http://www.flypig.co.uk